/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __LINUX_PWM_H
#define __LINUX_PWM_H

#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/of.h>

struct pwm_capture;
struct seq_file;

struct pwm_chip;

/**
 * enum pwm_polarity - polarity of a PWM signal
 * @PWM_POLARITY_NORMAL: a high signal for the duration of the duty-
 * cycle, followed by a low signal for the remainder of the pulse
 * period
 * @PWM_POLARITY_INVERSED: a low signal for the duration of the duty-
 * cycle, followed by a high signal for the remainder of the pulse
 * period
 */
enum pwm_polarity {
        PWM_POLARITY_NORMAL,
        PWM_POLARITY_INVERSED,
};

/**
 * struct pwm_args - board-dependent PWM arguments
 * @period: reference period
 * @polarity: reference polarity
 *
 * This structure describes board-dependent arguments attached to a PWM
 * device. These arguments are usually retrieved from the PWM lookup table or
 * device tree.
 *
 * Do not confuse this with the PWM state: PWM arguments represent the initial
 * configuration that users want to use on this PWM device rather than the
 * current PWM hardware state.
 */
struct pwm_args {
        u64 period;
        enum pwm_polarity polarity;
};

enum {
        PWMF_REQUESTED = 1 << 0,
        PWMF_EXPORTED = 1 << 1,
};

/*
 * struct pwm_state - state of a PWM channel
 * @period: PWM period (in nanoseconds)
 * @duty_cycle: PWM duty cycle (in nanoseconds)
 * @polarity: PWM polarity
 * @enabled: PWM enabled status
 * @usage_power: If set, the PWM driver is only required to maintain the power
 *               output but has more freedom regarding signal form.
 *               If supported, the signal can be optimized, for example to
 *               improve EMI by phase shifting individual channels.
 */
struct pwm_state {
        u64 period;
        u64 duty_cycle;
        enum pwm_polarity polarity;
        bool enabled;
        bool usage_power;
};

/**
 * struct pwm_device - PWM channel object
 * @label: name of the PWM device
 * @flags: flags associated with the PWM device
 * @hwpwm: per-chip relative index of the PWM device
 * @pwm: global index of the PWM device
 * @chip: PWM chip providing this PWM device
 * @chip_data: chip-private data associated with the PWM device
 * @args: PWM arguments
 * @state: last applied state
 * @last: last implemented state (for PWM_DEBUG)
 */
struct pwm_device {
        const char *label;
        unsigned long flags;
        unsigned int hwpwm;
        unsigned int pwm;
        struct pwm_chip *chip;
        void *chip_data;

        struct pwm_args args;
        struct pwm_state state;
        struct pwm_state last;
};

/**
 * pwm_get_state() - retrieve the current PWM state
 * @pwm: PWM device
 * @state: state to fill with the current PWM state
 *
 * The returned PWM state represents the state that was applied by a previous call to
 * pwm_apply_state(). Drivers may have to slightly tweak that state before programming it to
 * hardware. If pwm_apply_state() was never called, this returns either the current hardware
 * state (if supported) or the default settings.
 */
static inline void pwm_get_state(const struct pwm_device *pwm,
                                 struct pwm_state *state)
{
        *state = pwm->state;
}

static inline bool pwm_is_enabled(const struct pwm_device *pwm)
{
        struct pwm_state state;

        pwm_get_state(pwm, &state);

        return state.enabled;
}

static inline void pwm_set_period(struct pwm_device *pwm, u64 period)
{
        if (pwm)
                pwm->state.period = period;
}

static inline u64 pwm_get_period(const struct pwm_device *pwm)
{
        struct pwm_state state;

        pwm_get_state(pwm, &state);

        return state.period;
}

static inline void pwm_set_duty_cycle(struct pwm_device *pwm, unsigned int duty)
{
        if (pwm)
                pwm->state.duty_cycle = duty;
}

static inline u64 pwm_get_duty_cycle(const struct pwm_device *pwm)
{
        struct pwm_state state;

        pwm_get_state(pwm, &state);

        return state.duty_cycle;
}

static inline enum pwm_polarity pwm_get_polarity(const struct pwm_device *pwm)
{
        struct pwm_state state;

        pwm_get_state(pwm, &state);

        return state.polarity;
}

static inline void pwm_get_args(const struct pwm_device *pwm,
                                struct pwm_args *args)
{
        *args = pwm->args;
}

/**
 * pwm_init_state() - prepare a new state to be applied with pwm_apply_state()
 * @pwm: PWM device
 * @state: state to fill with the prepared PWM state
 *
 * This functions prepares a state that can later be tweaked and applied
 * to the PWM device with pwm_apply_state(). This is a convenient function
 * that first retrieves the current PWM state and the replaces the period
 * and polarity fields with the reference values defined in pwm->args.
 * Once the function returns, you can adjust the ->enabled and ->duty_cycle
 * fields according to your needs before calling pwm_apply_state().
 *
 * ->duty_cycle is initially set to zero to avoid cases where the current
 * ->duty_cycle value exceed the pwm_args->period one, which would trigger
 * an error if the user calls pwm_apply_state() without adjusting ->duty_cycle
 * first.
 */
static inline void pwm_init_state(const struct pwm_device *pwm,
                                  struct pwm_state *state)
{
        struct pwm_args args;

        /* First get the current state. */
        pwm_get_state(pwm, state);

        /* Then fill it with the reference config */
        pwm_get_args(pwm, &args);

        state->period = args.period;
        state->polarity = args.polarity;
        state->duty_cycle = 0;
        state->usage_power = false;
}

/**
 * pwm_get_relative_duty_cycle() - Get a relative duty cycle value
 * @state: PWM state to extract the duty cycle from
 * @scale: target scale of the relative duty cycle
 *
 * This functions converts the absolute duty cycle stored in @state (expressed
 * in nanosecond) into a value relative to the period.
 *
 * For example if you want to get the duty_cycle expressed in percent, call:
 *
 * pwm_get_state(pwm, &state);
 * duty = pwm_get_relative_duty_cycle(&state, 100);
 */
static inline unsigned int
pwm_get_relative_duty_cycle(const struct pwm_state *state, unsigned int scale)
{
        if (!state->period)
                return 0;

        return DIV_ROUND_CLOSEST_ULL((u64)state->duty_cycle * scale,
                                     state->period);
}

/**
 * pwm_set_relative_duty_cycle() - Set a relative duty cycle value
 * @state: PWM state to fill
 * @duty_cycle: relative duty cycle value
 * @scale: scale in which @duty_cycle is expressed
 *
 * This functions converts a relative into an absolute duty cycle (expressed
 * in nanoseconds), and puts the result in state->duty_cycle.
 *
 * For example if you want to configure a 50% duty cycle, call:
 *
 * pwm_init_state(pwm, &state);
 * pwm_set_relative_duty_cycle(&state, 50, 100);
 * pwm_apply_state(pwm, &state);
 *
 * This functions returns -EINVAL if @duty_cycle and/or @scale are
 * inconsistent (@scale == 0 or @duty_cycle > @scale).
 */
static inline int
pwm_set_relative_duty_cycle(struct pwm_state *state, unsigned int duty_cycle,
                            unsigned int scale)
{
        if (!scale || duty_cycle > scale)
                return -EINVAL;

        state->duty_cycle = DIV_ROUND_CLOSEST_ULL((u64)duty_cycle *
                                                  state->period,
                                                  scale);

        return 0;
}

/**
 * struct pwm_ops - PWM controller operations
 * @request: optional hook for requesting a PWM
 * @free: optional hook for freeing a PWM
 * @capture: capture and report PWM signal
 * @apply: atomically apply a new PWM config
 * @get_state: get the current PWM state. This function is only
 *             called once per PWM device when the PWM chip is
 *             registered.
 * @owner: helps prevent removal of modules exporting active PWMs
 * @config: configure duty cycles and period length for this PWM
 * @set_polarity: configure the polarity of this PWM
 * @enable: enable PWM output toggling
 * @disable: disable PWM output toggling
 */
struct pwm_ops {
        int (*request)(struct pwm_chip *chip, struct pwm_device *pwm);
        void (*free)(struct pwm_chip *chip, struct pwm_device *pwm);
        int (*capture)(struct pwm_chip *chip, struct pwm_device *pwm,
                       struct pwm_capture *result, unsigned long timeout);
        int (*apply)(struct pwm_chip *chip, struct pwm_device *pwm,
                     const struct pwm_state *state);
        void (*get_state)(struct pwm_chip *chip, struct pwm_device *pwm,
                          struct pwm_state *state);
        struct module *owner;

        /* Only used by legacy drivers */
        int (*config)(struct pwm_chip *chip, struct pwm_device *pwm,
                      int duty_ns, int period_ns);
        int (*set_polarity)(struct pwm_chip *chip, struct pwm_device *pwm,
                            enum pwm_polarity polarity);
        int (*enable)(struct pwm_chip *chip, struct pwm_device *pwm);
        void (*disable)(struct pwm_chip *chip, struct pwm_device *pwm);
};

/**
 * struct pwm_chip - abstract a PWM controller
 * @dev: device providing the PWMs
 * @ops: callbacks for this PWM controller
 * @base: number of first PWM controlled by this chip
 * @npwm: number of PWMs controlled by this chip
 * @of_xlate: request a PWM device given a device tree PWM specifier
 * @of_pwm_n_cells: number of cells expected in the device tree PWM specifier
 * @list: list node for internal use
 * @pwms: array of PWM devices allocated by the framework
 */
struct pwm_chip {
        struct device *dev;
        const struct pwm_ops *ops;
        int base;
        unsigned int npwm;

        struct pwm_device * (*of_xlate)(struct pwm_chip *pc,
                                        const struct of_phandle_args *args);
        unsigned int of_pwm_n_cells;

        /* only used internally by the PWM framework */
        struct list_head list;
        struct pwm_device *pwms;
};

/**
 * struct pwm_capture - PWM capture data
 * @period: period of the PWM signal (in nanoseconds)
 * @duty_cycle: duty cycle of the PWM signal (in nanoseconds)
 */
struct pwm_capture {
        unsigned int period;
        unsigned int duty_cycle;
};

#if IS_ENABLED(CONFIG_PWM)
/* PWM user APIs */
struct pwm_device *pwm_request(int pwm_id, const char *label);
void pwm_free(struct pwm_device *pwm);
int pwm_apply_state(struct pwm_device *pwm, const struct pwm_state *state);
int pwm_adjust_config(struct pwm_device *pwm);

/**
 * pwm_config() - change a PWM device configuration
 * @pwm: PWM device
 * @duty_ns: "on" time (in nanoseconds)
 * @period_ns: duration (in nanoseconds) of one cycle
 *
 * Returns: 0 on success or a negative error code on failure.
 */
static inline int pwm_config(struct pwm_device *pwm, int duty_ns,
                             int period_ns)
{
        struct pwm_state state;

        if (!pwm)
                return -EINVAL;

        if (duty_ns < 0 || period_ns < 0)
                return -EINVAL;

        pwm_get_state(pwm, &state);
        if (state.duty_cycle == duty_ns && state.period == period_ns)
                return 0;

        state.duty_cycle = duty_ns;
        state.period = period_ns;
        return pwm_apply_state(pwm, &state);
}

/**
 * pwm_enable() - start a PWM output toggling
 * @pwm: PWM device
 *
 * Returns: 0 on success or a negative error code on failure.
 */
static inline int pwm_enable(struct pwm_device *pwm)
{
        struct pwm_state state;

        if (!pwm)
                return -EINVAL;

        pwm_get_state(pwm, &state);
        if (state.enabled)
                return 0;

        state.enabled = true;
        return pwm_apply_state(pwm, &state);
}

/**
 * pwm_disable() - stop a PWM output toggling
 * @pwm: PWM device
 */
static inline void pwm_disable(struct pwm_device *pwm)
{
        struct pwm_state state;

        if (!pwm)
                return;

        pwm_get_state(pwm, &state);
        if (!state.enabled)
                return;

        state.enabled = false;
        pwm_apply_state(pwm, &state);
}

/* PWM provider APIs */
int pwm_capture(struct pwm_device *pwm, struct pwm_capture *result,
                unsigned long timeout);
int pwm_set_chip_data(struct pwm_device *pwm, void *data);
void *pwm_get_chip_data(struct pwm_device *pwm);

int pwmchip_add(struct pwm_chip *chip);
void pwmchip_remove(struct pwm_chip *chip);

int devm_pwmchip_add(struct device *dev, struct pwm_chip *chip);

struct pwm_device *pwm_request_from_chip(struct pwm_chip *chip,
                                         unsigned int index,
                                         const char *label);

struct pwm_device *of_pwm_xlate_with_flags(struct pwm_chip *pc,
                const struct of_phandle_args *args);
struct pwm_device *of_pwm_single_xlate(struct pwm_chip *pc,
                                       const struct of_phandle_args *args);

struct pwm_device *pwm_get(struct device *dev, const char *con_id);
struct pwm_device *of_pwm_get(struct device *dev, struct device_node *np,
                              const char *con_id);
void pwm_put(struct pwm_device *pwm);

struct pwm_device *devm_pwm_get(struct device *dev, const char *con_id);
struct pwm_device *devm_of_pwm_get(struct device *dev, struct device_node *np,
                                   const char *con_id);
struct pwm_device *devm_fwnode_pwm_get(struct device *dev,
                                       struct fwnode_handle *fwnode,
                                       const char *con_id);
#else
static inline struct pwm_device *pwm_request(int pwm_id, const char *label)
{
        might_sleep();
        return ERR_PTR(-ENODEV);
}

static inline void pwm_free(struct pwm_device *pwm)
{
        might_sleep();
}

static inline int pwm_apply_state(struct pwm_device *pwm,
                                  const struct pwm_state *state)
{
        might_sleep();
        return -ENOTSUPP;
}

static inline int pwm_adjust_config(struct pwm_device *pwm)
{
        return -ENOTSUPP;
}

static inline int pwm_config(struct pwm_device *pwm, int duty_ns,
                             int period_ns)
{
        might_sleep();
        return -EINVAL;
}

static inline int pwm_capture(struct pwm_device *pwm,
                              struct pwm_capture *result,
                              unsigned long timeout)
{
        return -EINVAL;
}

static inline int pwm_enable(struct pwm_device *pwm)
{
        might_sleep();
        return -EINVAL;
}

static inline void pwm_disable(struct pwm_device *pwm)
{
        might_sleep();
}

static inline int pwm_set_chip_data(struct pwm_device *pwm, void *data)
{
        return -EINVAL;
}

static inline void *pwm_get_chip_data(struct pwm_device *pwm)
{
        return NULL;
}

static inline int pwmchip_add(struct pwm_chip *chip)
{
        return -EINVAL;
}

static inline int pwmchip_remove(struct pwm_chip *chip)
{
        return -EINVAL;
}

static inline struct pwm_device *pwm_request_from_chip(struct pwm_chip *chip,
                                                       unsigned int index,
                                                       const char *label)
{
        might_sleep();
        return ERR_PTR(-ENODEV);
}

static inline struct pwm_device *pwm_get(struct device *dev,
                                         const char *consumer)
{
        might_sleep();
        return ERR_PTR(-ENODEV);
}

static inline struct pwm_device *of_pwm_get(struct device *dev,
                                            struct device_node *np,
                                            const char *con_id)
{
        might_sleep();
        return ERR_PTR(-ENODEV);
}

static inline void pwm_put(struct pwm_device *pwm)
{
        might_sleep();
}

static inline struct pwm_device *devm_pwm_get(struct device *dev,
                                              const char *consumer)
{
        might_sleep();
        return ERR_PTR(-ENODEV);
}

static inline struct pwm_device *devm_of_pwm_get(struct device *dev,
                                                 struct device_node *np,
                                                 const char *con_id)
{
        might_sleep();
        return ERR_PTR(-ENODEV);
}

static inline struct pwm_device *
devm_fwnode_pwm_get(struct device *dev, struct fwnode_handle *fwnode,
                    const char *con_id)
{
        might_sleep();
        return ERR_PTR(-ENODEV);
}
#endif

static inline void pwm_apply_args(struct pwm_device *pwm)
{
        struct pwm_state state = { };

        /*
         * PWM users calling pwm_apply_args() expect to have a fresh config
         * where the polarity and period are set according to pwm_args info.
         * The problem is, polarity can only be changed when the PWM is
         * disabled.
         *
         * PWM drivers supporting hardware readout may declare the PWM device
         * as enabled, and prevent polarity setting, which changes from the
         * existing behavior, where all PWM devices are declared as disabled
         * at startup (even if they are actually enabled), thus authorizing
         * polarity setting.
         *
         * To fulfill this requirement, we apply a new state which disables
         * the PWM device and set the reference period and polarity config.
         *
         * Note that PWM users requiring a smooth handover between the
         * bootloader and the kernel (like critical regulators controlled by
         * PWM devices) will have to switch to the atomic API and avoid calling
         * pwm_apply_args().
         */

        state.enabled = false;
        state.polarity = pwm->args.polarity;
        state.period = pwm->args.period;
        state.usage_power = false;

        pwm_apply_state(pwm, &state);
}

struct pwm_lookup {
        struct list_head list;
        const char *provider;
        unsigned int index;
        const char *dev_id;
        const char *con_id;
        unsigned int period;
        enum pwm_polarity polarity;
        const char *module; /* optional, may be NULL */
};

#define PWM_LOOKUP_WITH_MODULE(_provider, _index, _dev_id, _con_id,     \
                               _period, _polarity, _module)             \
        {                                                               \
                .provider = _provider,                                  \
                .index = _index,                                        \
                .dev_id = _dev_id,                                      \
                .con_id = _con_id,                                      \
                .period = _period,                                      \
                .polarity = _polarity,                                  \
                .module = _module,                                      \
        }

#define PWM_LOOKUP(_provider, _index, _dev_id, _con_id, _period, _polarity) \
        PWM_LOOKUP_WITH_MODULE(_provider, _index, _dev_id, _con_id, _period, \
                               _polarity, NULL)

#if IS_ENABLED(CONFIG_PWM)
void pwm_add_table(struct pwm_lookup *table, size_t num);
void pwm_remove_table(struct pwm_lookup *table, size_t num);
#else
static inline void pwm_add_table(struct pwm_lookup *table, size_t num)
{
}

static inline void pwm_remove_table(struct pwm_lookup *table, size_t num)
{
}
#endif

#ifdef CONFIG_PWM_SYSFS
void pwmchip_sysfs_export(struct pwm_chip *chip);
void pwmchip_sysfs_unexport(struct pwm_chip *chip);
#else
static inline void pwmchip_sysfs_export(struct pwm_chip *chip)
{
}

static inline void pwmchip_sysfs_unexport(struct pwm_chip *chip)
{
}
#endif /* CONFIG_PWM_SYSFS */

#endif /* __LINUX_PWM_H */