linux/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
<<
>>
Prefs
   1/*
   2 * arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
   3 *
   4 * Marvell Orion-VoIP GE Reference Design Setup
   5 *
   6 * This file is licensed under the terms of the GNU General Public
   7 * License version 2.  This program is licensed "as is" without any
   8 * warranty of any kind, whether express or implied.
   9 */
  10#include <linux/gpio.h>
  11#include <linux/kernel.h>
  12#include <linux/init.h>
  13#include <linux/platform_device.h>
  14#include <linux/pci.h>
  15#include <linux/irq.h>
  16#include <linux/mtd/physmap.h>
  17#include <linux/mv643xx_eth.h>
  18#include <linux/ethtool.h>
  19#include <linux/i2c.h>
  20#include <linux/platform_data/dsa.h>
  21#include <asm/mach-types.h>
  22#include <asm/mach/arch.h>
  23#include <asm/mach/pci.h>
  24#include "common.h"
  25#include "mpp.h"
  26#include "orion5x.h"
  27
  28/*****************************************************************************
  29 * RD-88F5181L GE Info
  30 ****************************************************************************/
  31/*
  32 * 16M NOR flash Device bus boot chip select
  33 */
  34#define RD88F5181L_GE_NOR_BOOT_BASE             0xff000000
  35#define RD88F5181L_GE_NOR_BOOT_SIZE             SZ_16M
  36
  37
  38/*****************************************************************************
  39 * 16M NOR Flash on Device bus Boot chip select
  40 ****************************************************************************/
  41static struct physmap_flash_data rd88f5181l_ge_nor_boot_flash_data = {
  42        .width          = 1,
  43};
  44
  45static struct resource rd88f5181l_ge_nor_boot_flash_resource = {
  46        .flags          = IORESOURCE_MEM,
  47        .start          = RD88F5181L_GE_NOR_BOOT_BASE,
  48        .end            = RD88F5181L_GE_NOR_BOOT_BASE +
  49                          RD88F5181L_GE_NOR_BOOT_SIZE - 1,
  50};
  51
  52static struct platform_device rd88f5181l_ge_nor_boot_flash = {
  53        .name                   = "physmap-flash",
  54        .id                     = 0,
  55        .dev            = {
  56                .platform_data  = &rd88f5181l_ge_nor_boot_flash_data,
  57        },
  58        .num_resources          = 1,
  59        .resource               = &rd88f5181l_ge_nor_boot_flash_resource,
  60};
  61
  62
  63/*****************************************************************************
  64 * General Setup
  65 ****************************************************************************/
  66static unsigned int rd88f5181l_ge_mpp_modes[] __initdata = {
  67        MPP0_GPIO,              /* LED1 */
  68        MPP1_GPIO,              /* LED5 */
  69        MPP2_GPIO,              /* LED4 */
  70        MPP3_GPIO,              /* LED3 */
  71        MPP4_GPIO,              /* PCI_intA */
  72        MPP5_GPIO,              /* RTC interrupt */
  73        MPP6_PCI_CLK,           /* CPU PCI refclk */
  74        MPP7_PCI_CLK,           /* PCI/PCIe refclk */
  75        MPP8_GPIO,              /* 88e6131 interrupt */
  76        MPP9_GPIO,              /* GE_RXERR */
  77        MPP10_GPIO,             /* PCI_intB */
  78        MPP11_GPIO,             /* LED2 */
  79        MPP12_GIGE,             /* GE_TXD[4] */
  80        MPP13_GIGE,             /* GE_TXD[5] */
  81        MPP14_GIGE,             /* GE_TXD[6] */
  82        MPP15_GIGE,             /* GE_TXD[7] */
  83        MPP16_GIGE,             /* GE_RXD[4] */
  84        MPP17_GIGE,             /* GE_RXD[5] */
  85        MPP18_GIGE,             /* GE_RXD[6] */
  86        MPP19_GIGE,             /* GE_RXD[7] */
  87        0,
  88};
  89
  90static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = {
  91        .phy_addr       = MV643XX_ETH_PHY_NONE,
  92        .speed          = SPEED_1000,
  93        .duplex         = DUPLEX_FULL,
  94};
  95
  96static struct dsa_chip_data rd88f5181l_ge_switch_chip_data = {
  97        .port_names[0]  = "lan2",
  98        .port_names[1]  = "lan1",
  99        .port_names[2]  = "wan",
 100        .port_names[3]  = "cpu",
 101        .port_names[5]  = "lan4",
 102        .port_names[7]  = "lan3",
 103};
 104
 105static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = {
 106        I2C_BOARD_INFO("ds1338", 0x68),
 107};
 108
 109static void __init rd88f5181l_ge_init(void)
 110{
 111        /*
 112         * Setup basic Orion functions. Need to be called early.
 113         */
 114        orion5x_init();
 115
 116        orion5x_mpp_conf(rd88f5181l_ge_mpp_modes);
 117
 118        /*
 119         * Configure peripherals.
 120         */
 121        orion5x_ehci0_init();
 122        orion5x_eth_init(&rd88f5181l_ge_eth_data);
 123        orion5x_eth_switch_init(&rd88f5181l_ge_switch_chip_data);
 124        orion5x_i2c_init();
 125        orion5x_uart0_init();
 126
 127        mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
 128                                    ORION_MBUS_DEVBUS_BOOT_ATTR,
 129                                    RD88F5181L_GE_NOR_BOOT_BASE,
 130                                    RD88F5181L_GE_NOR_BOOT_SIZE);
 131        platform_device_register(&rd88f5181l_ge_nor_boot_flash);
 132
 133        i2c_register_board_info(0, &rd88f5181l_ge_i2c_rtc, 1);
 134}
 135
 136static int __init
 137rd88f5181l_ge_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 138{
 139        int irq;
 140
 141        /*
 142         * Check for devices with hard-wired IRQs.
 143         */
 144        irq = orion5x_pci_map_irq(dev, slot, pin);
 145        if (irq != -1)
 146                return irq;
 147
 148        /*
 149         * Cardbus slot.
 150         */
 151        if (pin == 1)
 152                return gpio_to_irq(4);
 153        else
 154                return gpio_to_irq(10);
 155}
 156
 157static struct hw_pci rd88f5181l_ge_pci __initdata = {
 158        .nr_controllers = 2,
 159        .setup          = orion5x_pci_sys_setup,
 160        .scan           = orion5x_pci_sys_scan_bus,
 161        .map_irq        = rd88f5181l_ge_pci_map_irq,
 162};
 163
 164static int __init rd88f5181l_ge_pci_init(void)
 165{
 166        if (machine_is_rd88f5181l_ge()) {
 167                orion5x_pci_set_cardbus_mode();
 168                pci_common_init(&rd88f5181l_ge_pci);
 169        }
 170
 171        return 0;
 172}
 173subsys_initcall(rd88f5181l_ge_pci_init);
 174
 175MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design")
 176        /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
 177        .atag_offset    = 0x100,
 178        .nr_irqs        = ORION5X_NR_IRQS,
 179        .init_machine   = rd88f5181l_ge_init,
 180        .map_io         = orion5x_map_io,
 181        .init_early     = orion5x_init_early,
 182        .init_irq       = orion5x_init_irq,
 183        .init_time      = orion5x_timer_init,
 184        .fixup          = tag_fixup_mem32,
 185        .restart        = orion5x_restart,
 186MACHINE_END
 187