linux/drivers/mfd/omap-usb-host.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-only
   2/**
   3 * omap-usb-host.c - The USBHS core driver for OMAP EHCI & OHCI
   4 *
   5 * Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com
   6 * Author: Keshava Munegowda <keshava_mgowda@ti.com>
   7 * Author: Roger Quadros <rogerq@ti.com>
   8 */
   9#include <linux/kernel.h>
  10#include <linux/module.h>
  11#include <linux/types.h>
  12#include <linux/slab.h>
  13#include <linux/delay.h>
  14#include <linux/clk.h>
  15#include <linux/dma-mapping.h>
  16#include <linux/gpio.h>
  17#include <linux/platform_device.h>
  18#include <linux/platform_data/usb-omap.h>
  19#include <linux/pm_runtime.h>
  20#include <linux/of.h>
  21#include <linux/of_platform.h>
  22#include <linux/err.h>
  23
  24#include "omap-usb.h"
  25
  26#define USBHS_DRIVER_NAME       "usbhs_omap"
  27#define OMAP_EHCI_DEVICE        "ehci-omap"
  28#define OMAP_OHCI_DEVICE        "ohci-omap3"
  29
  30/* OMAP USBHOST Register addresses  */
  31
  32/* UHH Register Set */
  33#define OMAP_UHH_REVISION                               (0x00)
  34#define OMAP_UHH_SYSCONFIG                              (0x10)
  35#define OMAP_UHH_SYSCONFIG_MIDLEMODE                    (1 << 12)
  36#define OMAP_UHH_SYSCONFIG_CACTIVITY                    (1 << 8)
  37#define OMAP_UHH_SYSCONFIG_SIDLEMODE                    (1 << 3)
  38#define OMAP_UHH_SYSCONFIG_ENAWAKEUP                    (1 << 2)
  39#define OMAP_UHH_SYSCONFIG_SOFTRESET                    (1 << 1)
  40#define OMAP_UHH_SYSCONFIG_AUTOIDLE                     (1 << 0)
  41
  42#define OMAP_UHH_SYSSTATUS                              (0x14)
  43#define OMAP_UHH_HOSTCONFIG                             (0x40)
  44#define OMAP_UHH_HOSTCONFIG_ULPI_BYPASS                 (1 << 0)
  45#define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS              (1 << 0)
  46#define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS              (1 << 11)
  47#define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS              (1 << 12)
  48#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN              (1 << 2)
  49#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN              (1 << 3)
  50#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN             (1 << 4)
  51#define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN              (1 << 5)
  52#define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS           (1 << 8)
  53#define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS           (1 << 9)
  54#define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS           (1 << 10)
  55#define OMAP4_UHH_HOSTCONFIG_APP_START_CLK              (1 << 31)
  56
  57/* OMAP4-specific defines */
  58#define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR              (3 << 2)
  59#define OMAP4_UHH_SYSCONFIG_NOIDLE                      (1 << 2)
  60#define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR             (3 << 4)
  61#define OMAP4_UHH_SYSCONFIG_NOSTDBY                     (1 << 4)
  62#define OMAP4_UHH_SYSCONFIG_SOFTRESET                   (1 << 0)
  63
  64#define OMAP4_P1_MODE_CLEAR                             (3 << 16)
  65#define OMAP4_P1_MODE_TLL                               (1 << 16)
  66#define OMAP4_P1_MODE_HSIC                              (3 << 16)
  67#define OMAP4_P2_MODE_CLEAR                             (3 << 18)
  68#define OMAP4_P2_MODE_TLL                               (1 << 18)
  69#define OMAP4_P2_MODE_HSIC                              (3 << 18)
  70
  71#define OMAP_UHH_DEBUG_CSR                              (0x44)
  72
  73/* Values of UHH_REVISION - Note: these are not given in the TRM */
  74#define OMAP_USBHS_REV1         0x00000010      /* OMAP3 */
  75#define OMAP_USBHS_REV2         0x50700100      /* OMAP4 */
  76
  77#define is_omap_usbhs_rev1(x)   (x->usbhs_rev == OMAP_USBHS_REV1)
  78#define is_omap_usbhs_rev2(x)   (x->usbhs_rev == OMAP_USBHS_REV2)
  79
  80#define is_ehci_phy_mode(x)     (x == OMAP_EHCI_PORT_MODE_PHY)
  81#define is_ehci_tll_mode(x)     (x == OMAP_EHCI_PORT_MODE_TLL)
  82#define is_ehci_hsic_mode(x)    (x == OMAP_EHCI_PORT_MODE_HSIC)
  83
  84
  85struct usbhs_hcd_omap {
  86        int                             nports;
  87        struct clk                      **utmi_clk;
  88        struct clk                      **hsic60m_clk;
  89        struct clk                      **hsic480m_clk;
  90
  91        struct clk                      *xclk60mhsp1_ck;
  92        struct clk                      *xclk60mhsp2_ck;
  93        struct clk                      *utmi_p1_gfclk;
  94        struct clk                      *utmi_p2_gfclk;
  95        struct clk                      *init_60m_fclk;
  96        struct clk                      *ehci_logic_fck;
  97
  98        void __iomem                    *uhh_base;
  99
 100        struct usbhs_omap_platform_data *pdata;
 101
 102        u32                             usbhs_rev;
 103};
 104/*-------------------------------------------------------------------------*/
 105
 106static const char usbhs_driver_name[] = USBHS_DRIVER_NAME;
 107static u64 usbhs_dmamask = DMA_BIT_MASK(32);
 108
 109/*-------------------------------------------------------------------------*/
 110
 111static inline void usbhs_write(void __iomem *base, u32 reg, u32 val)
 112{
 113        writel_relaxed(val, base + reg);
 114}
 115
 116static inline u32 usbhs_read(void __iomem *base, u32 reg)
 117{
 118        return readl_relaxed(base + reg);
 119}
 120
 121/*-------------------------------------------------------------------------*/
 122
 123/**
 124 * Map 'enum usbhs_omap_port_mode' found in <linux/platform_data/usb-omap.h>
 125 * to the device tree binding portN-mode found in
 126 * 'Documentation/devicetree/bindings/mfd/omap-usb-host.txt'
 127 */
 128static const char * const port_modes[] = {
 129        [OMAP_USBHS_PORT_MODE_UNUSED]   = "",
 130        [OMAP_EHCI_PORT_MODE_PHY]       = "ehci-phy",
 131        [OMAP_EHCI_PORT_MODE_TLL]       = "ehci-tll",
 132        [OMAP_EHCI_PORT_MODE_HSIC]      = "ehci-hsic",
 133        [OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0]   = "ohci-phy-6pin-datse0",
 134        [OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM]     = "ohci-phy-6pin-dpdm",
 135        [OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0]   = "ohci-phy-3pin-datse0",
 136        [OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM]     = "ohci-phy-4pin-dpdm",
 137        [OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0]   = "ohci-tll-6pin-datse0",
 138        [OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM]     = "ohci-tll-6pin-dpdm",
 139        [OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0]   = "ohci-tll-3pin-datse0",
 140        [OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM]     = "ohci-tll-4pin-dpdm",
 141        [OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0]   = "ohci-tll-2pin-datse0",
 142        [OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM]     = "ohci-tll-2pin-dpdm",
 143};
 144
 145static struct platform_device *omap_usbhs_alloc_child(const char *name,
 146                        struct resource *res, int num_resources, void *pdata,
 147                        size_t pdata_size, struct device *dev)
 148{
 149        struct platform_device  *child;
 150        int                     ret;
 151
 152        child = platform_device_alloc(name, 0);
 153
 154        if (!child) {
 155                dev_err(dev, "platform_device_alloc %s failed\n", name);
 156                goto err_end;
 157        }
 158
 159        ret = platform_device_add_resources(child, res, num_resources);
 160        if (ret) {
 161                dev_err(dev, "platform_device_add_resources failed\n");
 162                goto err_alloc;
 163        }
 164
 165        ret = platform_device_add_data(child, pdata, pdata_size);
 166        if (ret) {
 167                dev_err(dev, "platform_device_add_data failed\n");
 168                goto err_alloc;
 169        }
 170
 171        child->dev.dma_mask             = &usbhs_dmamask;
 172        dma_set_coherent_mask(&child->dev, DMA_BIT_MASK(32));
 173        child->dev.parent               = dev;
 174
 175        ret = platform_device_add(child);
 176        if (ret) {
 177                dev_err(dev, "platform_device_add failed\n");
 178                goto err_alloc;
 179        }
 180
 181        return child;
 182
 183err_alloc:
 184        platform_device_put(child);
 185
 186err_end:
 187        return NULL;
 188}
 189
 190static int omap_usbhs_alloc_children(struct platform_device *pdev)
 191{
 192        struct device                           *dev = &pdev->dev;
 193        struct usbhs_omap_platform_data         *pdata = dev_get_platdata(dev);
 194        struct platform_device                  *ehci;
 195        struct platform_device                  *ohci;
 196        struct resource                         *res;
 197        struct resource                         resources[2];
 198        int                                     ret;
 199
 200        res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ehci");
 201        if (!res) {
 202                dev_err(dev, "EHCI get resource IORESOURCE_MEM failed\n");
 203                ret = -ENODEV;
 204                goto err_end;
 205        }
 206        resources[0] = *res;
 207
 208        res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ehci-irq");
 209        if (!res) {
 210                dev_err(dev, " EHCI get resource IORESOURCE_IRQ failed\n");
 211                ret = -ENODEV;
 212                goto err_end;
 213        }
 214        resources[1] = *res;
 215
 216        ehci = omap_usbhs_alloc_child(OMAP_EHCI_DEVICE, resources, 2, pdata,
 217                sizeof(*pdata), dev);
 218
 219        if (!ehci) {
 220                dev_err(dev, "omap_usbhs_alloc_child failed\n");
 221                ret = -ENOMEM;
 222                goto err_end;
 223        }
 224
 225        res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ohci");
 226        if (!res) {
 227                dev_err(dev, "OHCI get resource IORESOURCE_MEM failed\n");
 228                ret = -ENODEV;
 229                goto err_ehci;
 230        }
 231        resources[0] = *res;
 232
 233        res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ohci-irq");
 234        if (!res) {
 235                dev_err(dev, "OHCI get resource IORESOURCE_IRQ failed\n");
 236                ret = -ENODEV;
 237                goto err_ehci;
 238        }
 239        resources[1] = *res;
 240
 241        ohci = omap_usbhs_alloc_child(OMAP_OHCI_DEVICE, resources, 2, pdata,
 242                sizeof(*pdata), dev);
 243        if (!ohci) {
 244                dev_err(dev, "omap_usbhs_alloc_child failed\n");
 245                ret = -ENOMEM;
 246                goto err_ehci;
 247        }
 248
 249        return 0;
 250
 251err_ehci:
 252        platform_device_unregister(ehci);
 253
 254err_end:
 255        return ret;
 256}
 257
 258static bool is_ohci_port(enum usbhs_omap_port_mode pmode)
 259{
 260        switch (pmode) {
 261        case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
 262        case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
 263        case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
 264        case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
 265        case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
 266        case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
 267        case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
 268        case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
 269        case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
 270        case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
 271                return true;
 272
 273        default:
 274                return false;
 275        }
 276}
 277
 278static int usbhs_runtime_resume(struct device *dev)
 279{
 280        struct usbhs_hcd_omap           *omap = dev_get_drvdata(dev);
 281        struct usbhs_omap_platform_data *pdata = omap->pdata;
 282        int i, r;
 283
 284        dev_dbg(dev, "usbhs_runtime_resume\n");
 285
 286        omap_tll_enable(pdata);
 287
 288        if (!IS_ERR(omap->ehci_logic_fck))
 289                clk_prepare_enable(omap->ehci_logic_fck);
 290
 291        for (i = 0; i < omap->nports; i++) {
 292                switch (pdata->port_mode[i]) {
 293                case OMAP_EHCI_PORT_MODE_HSIC:
 294                        if (!IS_ERR(omap->hsic60m_clk[i])) {
 295                                r = clk_prepare_enable(omap->hsic60m_clk[i]);
 296                                if (r) {
 297                                        dev_err(dev,
 298                                         "Can't enable port %d hsic60m clk:%d\n",
 299                                         i, r);
 300                                }
 301                        }
 302
 303                        if (!IS_ERR(omap->hsic480m_clk[i])) {
 304                                r = clk_prepare_enable(omap->hsic480m_clk[i]);
 305                                if (r) {
 306                                        dev_err(dev,
 307                                         "Can't enable port %d hsic480m clk:%d\n",
 308                                         i, r);
 309                                }
 310                        }
 311                /* Fall through as HSIC mode needs utmi_clk */
 312
 313                case OMAP_EHCI_PORT_MODE_TLL:
 314                        if (!IS_ERR(omap->utmi_clk[i])) {
 315                                r = clk_prepare_enable(omap->utmi_clk[i]);
 316                                if (r) {
 317                                        dev_err(dev,
 318                                         "Can't enable port %d clk : %d\n",
 319                                         i, r);
 320                                }
 321                        }
 322                        break;
 323                default:
 324                        break;
 325                }
 326        }
 327
 328        return 0;
 329}
 330
 331static int usbhs_runtime_suspend(struct device *dev)
 332{
 333        struct usbhs_hcd_omap           *omap = dev_get_drvdata(dev);
 334        struct usbhs_omap_platform_data *pdata = omap->pdata;
 335        int i;
 336
 337        dev_dbg(dev, "usbhs_runtime_suspend\n");
 338
 339        for (i = 0; i < omap->nports; i++) {
 340                switch (pdata->port_mode[i]) {
 341                case OMAP_EHCI_PORT_MODE_HSIC:
 342                        if (!IS_ERR(omap->hsic60m_clk[i]))
 343                                clk_disable_unprepare(omap->hsic60m_clk[i]);
 344
 345                        if (!IS_ERR(omap->hsic480m_clk[i]))
 346                                clk_disable_unprepare(omap->hsic480m_clk[i]);
 347                /* Fall through as utmi_clks were used in HSIC mode */
 348
 349                case OMAP_EHCI_PORT_MODE_TLL:
 350                        if (!IS_ERR(omap->utmi_clk[i]))
 351                                clk_disable_unprepare(omap->utmi_clk[i]);
 352                        break;
 353                default:
 354                        break;
 355                }
 356        }
 357
 358        if (!IS_ERR(omap->ehci_logic_fck))
 359                clk_disable_unprepare(omap->ehci_logic_fck);
 360
 361        omap_tll_disable(pdata);
 362
 363        return 0;
 364}
 365
 366static unsigned omap_usbhs_rev1_hostconfig(struct usbhs_hcd_omap *omap,
 367                                                unsigned reg)
 368{
 369        struct usbhs_omap_platform_data *pdata = omap->pdata;
 370        int i;
 371
 372        for (i = 0; i < omap->nports; i++) {
 373                switch (pdata->port_mode[i]) {
 374                case OMAP_USBHS_PORT_MODE_UNUSED:
 375                        reg &= ~(OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS << i);
 376                        break;
 377                case OMAP_EHCI_PORT_MODE_PHY:
 378                        if (pdata->single_ulpi_bypass)
 379                                break;
 380
 381                        if (i == 0)
 382                                reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
 383                        else
 384                                reg &= ~(OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS
 385                                                                << (i-1));
 386                        break;
 387                default:
 388                        if (pdata->single_ulpi_bypass)
 389                                break;
 390
 391                        if (i == 0)
 392                                reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
 393                        else
 394                                reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS
 395                                                                << (i-1);
 396                        break;
 397                }
 398        }
 399
 400        if (pdata->single_ulpi_bypass) {
 401                /* bypass ULPI only if none of the ports use PHY mode */
 402                reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
 403
 404                for (i = 0; i < omap->nports; i++) {
 405                        if (is_ehci_phy_mode(pdata->port_mode[i])) {
 406                                reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
 407                                break;
 408                        }
 409                }
 410        }
 411
 412        return reg;
 413}
 414
 415static unsigned omap_usbhs_rev2_hostconfig(struct usbhs_hcd_omap *omap,
 416                                                unsigned reg)
 417{
 418        struct usbhs_omap_platform_data *pdata = omap->pdata;
 419        int i;
 420
 421        for (i = 0; i < omap->nports; i++) {
 422                /* Clear port mode fields for PHY mode */
 423                reg &= ~(OMAP4_P1_MODE_CLEAR << 2 * i);
 424
 425                if (is_ehci_tll_mode(pdata->port_mode[i]) ||
 426                                (is_ohci_port(pdata->port_mode[i])))
 427                        reg |= OMAP4_P1_MODE_TLL << 2 * i;
 428                else if (is_ehci_hsic_mode(pdata->port_mode[i]))
 429                        reg |= OMAP4_P1_MODE_HSIC << 2 * i;
 430        }
 431
 432        return reg;
 433}
 434
 435static void omap_usbhs_init(struct device *dev)
 436{
 437        struct usbhs_hcd_omap           *omap = dev_get_drvdata(dev);
 438        unsigned                        reg;
 439
 440        dev_dbg(dev, "starting TI HSUSB Controller\n");
 441
 442        pm_runtime_get_sync(dev);
 443
 444        reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
 445        /* setup ULPI bypass and burst configurations */
 446        reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
 447                        | OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN
 448                        | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN);
 449        reg |= OMAP4_UHH_HOSTCONFIG_APP_START_CLK;
 450        reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;
 451
 452        switch (omap->usbhs_rev) {
 453        case OMAP_USBHS_REV1:
 454                reg = omap_usbhs_rev1_hostconfig(omap, reg);
 455                break;
 456
 457        case OMAP_USBHS_REV2:
 458                reg = omap_usbhs_rev2_hostconfig(omap, reg);
 459                break;
 460
 461        default:        /* newer revisions */
 462                reg = omap_usbhs_rev2_hostconfig(omap, reg);
 463                break;
 464        }
 465
 466        usbhs_write(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg);
 467        dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
 468
 469        pm_runtime_put_sync(dev);
 470}
 471
 472static int usbhs_omap_get_dt_pdata(struct device *dev,
 473                                        struct usbhs_omap_platform_data *pdata)
 474{
 475        int ret, i;
 476        struct device_node *node = dev->of_node;
 477
 478        ret = of_property_read_u32(node, "num-ports", &pdata->nports);
 479        if (ret)
 480                pdata->nports = 0;
 481
 482        if (pdata->nports > OMAP3_HS_USB_PORTS) {
 483                dev_warn(dev, "Too many num_ports <%d> in device tree. Max %d\n",
 484                                pdata->nports, OMAP3_HS_USB_PORTS);
 485                return -ENODEV;
 486        }
 487
 488        /* get port modes */
 489        for (i = 0; i < OMAP3_HS_USB_PORTS; i++) {
 490                char prop[11];
 491                const char *mode;
 492
 493                pdata->port_mode[i] = OMAP_USBHS_PORT_MODE_UNUSED;
 494
 495                snprintf(prop, sizeof(prop), "port%d-mode", i + 1);
 496                ret = of_property_read_string(node, prop, &mode);
 497                if (ret < 0)
 498                        continue;
 499
 500                /* get 'enum usbhs_omap_port_mode' from port mode string */
 501                ret = match_string(port_modes, ARRAY_SIZE(port_modes), mode);
 502                if (ret < 0) {
 503                        dev_warn(dev, "Invalid port%d-mode \"%s\" in device tree\n",
 504                                        i, mode);
 505                        return -ENODEV;
 506                }
 507
 508                dev_dbg(dev, "port%d-mode: %s -> %d\n", i, mode, ret);
 509                pdata->port_mode[i] = ret;
 510        }
 511
 512        /* get flags */
 513        pdata->single_ulpi_bypass = of_property_read_bool(node,
 514                                                "single-ulpi-bypass");
 515
 516        return 0;
 517}
 518
 519static const struct of_device_id usbhs_child_match_table[] = {
 520        { .compatible = "ti,ehci-omap", },
 521        { .compatible = "ti,ohci-omap3", },
 522        { }
 523};
 524
 525/**
 526 * usbhs_omap_probe - initialize TI-based HCDs
 527 *
 528 * Allocates basic resources for this USB host controller.
 529 */
 530static int usbhs_omap_probe(struct platform_device *pdev)
 531{
 532        struct device                   *dev =  &pdev->dev;
 533        struct usbhs_omap_platform_data *pdata = dev_get_platdata(dev);
 534        struct usbhs_hcd_omap           *omap;
 535        struct resource                 *res;
 536        int                             ret = 0;
 537        int                             i;
 538        bool                            need_logic_fck;
 539
 540        if (dev->of_node) {
 541                /* For DT boot we populate platform data from OF node */
 542                pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
 543                if (!pdata)
 544                        return -ENOMEM;
 545
 546                ret = usbhs_omap_get_dt_pdata(dev, pdata);
 547                if (ret)
 548                        return ret;
 549
 550                dev->platform_data = pdata;
 551        }
 552
 553        if (!pdata) {
 554                dev_err(dev, "Missing platform data\n");
 555                return -ENODEV;
 556        }
 557
 558        if (pdata->nports > OMAP3_HS_USB_PORTS) {
 559                dev_info(dev, "Too many num_ports <%d> in platform_data. Max %d\n",
 560                                pdata->nports, OMAP3_HS_USB_PORTS);
 561                return -ENODEV;
 562        }
 563
 564        omap = devm_kzalloc(dev, sizeof(*omap), GFP_KERNEL);
 565        if (!omap) {
 566                dev_err(dev, "Memory allocation failed\n");
 567                return -ENOMEM;
 568        }
 569
 570        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 571        omap->uhh_base = devm_ioremap_resource(dev, res);
 572        if (IS_ERR(omap->uhh_base))
 573                return PTR_ERR(omap->uhh_base);
 574
 575        omap->pdata = pdata;
 576
 577        /* Initialize the TLL subsystem */
 578        omap_tll_init(pdata);
 579
 580        pm_runtime_enable(dev);
 581
 582        platform_set_drvdata(pdev, omap);
 583        pm_runtime_get_sync(dev);
 584
 585        omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
 586
 587        /* we need to call runtime suspend before we update omap->nports
 588         * to prevent unbalanced clk_disable()
 589         */
 590        pm_runtime_put_sync(dev);
 591
 592        /*
 593         * If platform data contains nports then use that
 594         * else make out number of ports from USBHS revision
 595         */
 596        if (pdata->nports) {
 597                omap->nports = pdata->nports;
 598        } else {
 599                switch (omap->usbhs_rev) {
 600                case OMAP_USBHS_REV1:
 601                        omap->nports = 3;
 602                        break;
 603                case OMAP_USBHS_REV2:
 604                        omap->nports = 2;
 605                        break;
 606                default:
 607                        omap->nports = OMAP3_HS_USB_PORTS;
 608                        dev_dbg(dev,
 609                         "USB HOST Rev:0x%x not recognized, assuming %d ports\n",
 610                         omap->usbhs_rev, omap->nports);
 611                        break;
 612                }
 613                pdata->nports = omap->nports;
 614        }
 615
 616        i = sizeof(struct clk *) * omap->nports;
 617        omap->utmi_clk = devm_kzalloc(dev, i, GFP_KERNEL);
 618        omap->hsic480m_clk = devm_kzalloc(dev, i, GFP_KERNEL);
 619        omap->hsic60m_clk = devm_kzalloc(dev, i, GFP_KERNEL);
 620
 621        if (!omap->utmi_clk || !omap->hsic480m_clk || !omap->hsic60m_clk) {
 622                dev_err(dev, "Memory allocation failed\n");
 623                ret = -ENOMEM;
 624                goto err_mem;
 625        }
 626
 627        /* Set all clocks as invalid to begin with */
 628        omap->ehci_logic_fck = ERR_PTR(-ENODEV);
 629        omap->init_60m_fclk = ERR_PTR(-ENODEV);
 630        omap->utmi_p1_gfclk = ERR_PTR(-ENODEV);
 631        omap->utmi_p2_gfclk = ERR_PTR(-ENODEV);
 632        omap->xclk60mhsp1_ck = ERR_PTR(-ENODEV);
 633        omap->xclk60mhsp2_ck = ERR_PTR(-ENODEV);
 634
 635        for (i = 0; i < omap->nports; i++) {
 636                omap->utmi_clk[i] = ERR_PTR(-ENODEV);
 637                omap->hsic480m_clk[i] = ERR_PTR(-ENODEV);
 638                omap->hsic60m_clk[i] = ERR_PTR(-ENODEV);
 639        }
 640
 641        /* for OMAP3 i.e. USBHS REV1 */
 642        if (omap->usbhs_rev == OMAP_USBHS_REV1) {
 643                need_logic_fck = false;
 644                for (i = 0; i < omap->nports; i++) {
 645                        if (is_ehci_phy_mode(pdata->port_mode[i]) ||
 646                            is_ehci_tll_mode(pdata->port_mode[i]) ||
 647                            is_ehci_hsic_mode(pdata->port_mode[i]))
 648
 649                                need_logic_fck |= true;
 650                }
 651
 652                if (need_logic_fck) {
 653                        omap->ehci_logic_fck = devm_clk_get(dev,
 654                                                            "usbhost_120m_fck");
 655                        if (IS_ERR(omap->ehci_logic_fck)) {
 656                                ret = PTR_ERR(omap->ehci_logic_fck);
 657                                dev_err(dev, "usbhost_120m_fck failed:%d\n",
 658                                        ret);
 659                                goto err_mem;
 660                        }
 661                }
 662                goto initialize;
 663        }
 664
 665        /* for OMAP4+ i.e. USBHS REV2+ */
 666        omap->utmi_p1_gfclk = devm_clk_get(dev, "utmi_p1_gfclk");
 667        if (IS_ERR(omap->utmi_p1_gfclk)) {
 668                ret = PTR_ERR(omap->utmi_p1_gfclk);
 669                dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret);
 670                goto err_mem;
 671        }
 672
 673        omap->utmi_p2_gfclk = devm_clk_get(dev, "utmi_p2_gfclk");
 674        if (IS_ERR(omap->utmi_p2_gfclk)) {
 675                ret = PTR_ERR(omap->utmi_p2_gfclk);
 676                dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
 677                goto err_mem;
 678        }
 679
 680        omap->xclk60mhsp1_ck = devm_clk_get(dev, "refclk_60m_ext_p1");
 681        if (IS_ERR(omap->xclk60mhsp1_ck)) {
 682                ret = PTR_ERR(omap->xclk60mhsp1_ck);
 683                dev_err(dev, "refclk_60m_ext_p1 failed error:%d\n", ret);
 684                goto err_mem;
 685        }
 686
 687        omap->xclk60mhsp2_ck = devm_clk_get(dev, "refclk_60m_ext_p2");
 688        if (IS_ERR(omap->xclk60mhsp2_ck)) {
 689                ret = PTR_ERR(omap->xclk60mhsp2_ck);
 690                dev_err(dev, "refclk_60m_ext_p2 failed error:%d\n", ret);
 691                goto err_mem;
 692        }
 693
 694        omap->init_60m_fclk = devm_clk_get(dev, "refclk_60m_int");
 695        if (IS_ERR(omap->init_60m_fclk)) {
 696                ret = PTR_ERR(omap->init_60m_fclk);
 697                dev_err(dev, "refclk_60m_int failed error:%d\n", ret);
 698                goto err_mem;
 699        }
 700
 701        for (i = 0; i < omap->nports; i++) {
 702                char clkname[30];
 703
 704                /* clock names are indexed from 1*/
 705                snprintf(clkname, sizeof(clkname),
 706                                "usb_host_hs_utmi_p%d_clk", i + 1);
 707
 708                /* If a clock is not found we won't bail out as not all
 709                 * platforms have all clocks and we can function without
 710                 * them
 711                 */
 712                omap->utmi_clk[i] = devm_clk_get(dev, clkname);
 713                if (IS_ERR(omap->utmi_clk[i])) {
 714                        ret = PTR_ERR(omap->utmi_clk[i]);
 715                        dev_err(dev, "Failed to get clock : %s : %d\n",
 716                                clkname, ret);
 717                        goto err_mem;
 718                }
 719
 720                snprintf(clkname, sizeof(clkname),
 721                                "usb_host_hs_hsic480m_p%d_clk", i + 1);
 722                omap->hsic480m_clk[i] = devm_clk_get(dev, clkname);
 723                if (IS_ERR(omap->hsic480m_clk[i])) {
 724                        ret = PTR_ERR(omap->hsic480m_clk[i]);
 725                        dev_err(dev, "Failed to get clock : %s : %d\n",
 726                                clkname, ret);
 727                        goto err_mem;
 728                }
 729
 730                snprintf(clkname, sizeof(clkname),
 731                                "usb_host_hs_hsic60m_p%d_clk", i + 1);
 732                omap->hsic60m_clk[i] = devm_clk_get(dev, clkname);
 733                if (IS_ERR(omap->hsic60m_clk[i])) {
 734                        ret = PTR_ERR(omap->hsic60m_clk[i]);
 735                        dev_err(dev, "Failed to get clock : %s : %d\n",
 736                                clkname, ret);
 737                        goto err_mem;
 738                }
 739        }
 740
 741        if (is_ehci_phy_mode(pdata->port_mode[0])) {
 742                ret = clk_set_parent(omap->utmi_p1_gfclk,
 743                                        omap->xclk60mhsp1_ck);
 744                if (ret != 0) {
 745                        dev_err(dev, "xclk60mhsp1_ck set parent failed: %d\n",
 746                                ret);
 747                        goto err_mem;
 748                }
 749        } else if (is_ehci_tll_mode(pdata->port_mode[0])) {
 750                ret = clk_set_parent(omap->utmi_p1_gfclk,
 751                                        omap->init_60m_fclk);
 752                if (ret != 0) {
 753                        dev_err(dev, "P0 init_60m_fclk set parent failed: %d\n",
 754                                ret);
 755                        goto err_mem;
 756                }
 757        }
 758
 759        if (is_ehci_phy_mode(pdata->port_mode[1])) {
 760                ret = clk_set_parent(omap->utmi_p2_gfclk,
 761                                        omap->xclk60mhsp2_ck);
 762                if (ret != 0) {
 763                        dev_err(dev, "xclk60mhsp2_ck set parent failed: %d\n",
 764                                ret);
 765                        goto err_mem;
 766                }
 767        } else if (is_ehci_tll_mode(pdata->port_mode[1])) {
 768                ret = clk_set_parent(omap->utmi_p2_gfclk,
 769                                                omap->init_60m_fclk);
 770                if (ret != 0) {
 771                        dev_err(dev, "P1 init_60m_fclk set parent failed: %d\n",
 772                                ret);
 773                        goto err_mem;
 774                }
 775        }
 776
 777initialize:
 778        omap_usbhs_init(dev);
 779
 780        if (dev->of_node) {
 781                ret = of_platform_populate(dev->of_node,
 782                                usbhs_child_match_table, NULL, dev);
 783
 784                if (ret) {
 785                        dev_err(dev, "Failed to create DT children: %d\n", ret);
 786                        goto err_mem;
 787                }
 788
 789        } else {
 790                ret = omap_usbhs_alloc_children(pdev);
 791                if (ret) {
 792                        dev_err(dev, "omap_usbhs_alloc_children failed: %d\n",
 793                                                ret);
 794                        goto err_mem;
 795                }
 796        }
 797
 798        return 0;
 799
 800err_mem:
 801        pm_runtime_disable(dev);
 802
 803        return ret;
 804}
 805
 806static int usbhs_omap_remove_child(struct device *dev, void *data)
 807{
 808        dev_info(dev, "unregistering\n");
 809        platform_device_unregister(to_platform_device(dev));
 810        return 0;
 811}
 812
 813/**
 814 * usbhs_omap_remove - shutdown processing for UHH & TLL HCDs
 815 * @pdev: USB Host Controller being removed
 816 *
 817 * Reverses the effect of usbhs_omap_probe().
 818 */
 819static int usbhs_omap_remove(struct platform_device *pdev)
 820{
 821        pm_runtime_disable(&pdev->dev);
 822
 823        /* remove children */
 824        device_for_each_child(&pdev->dev, NULL, usbhs_omap_remove_child);
 825        return 0;
 826}
 827
 828static const struct dev_pm_ops usbhsomap_dev_pm_ops = {
 829        .runtime_suspend        = usbhs_runtime_suspend,
 830        .runtime_resume         = usbhs_runtime_resume,
 831};
 832
 833static const struct of_device_id usbhs_omap_dt_ids[] = {
 834        { .compatible = "ti,usbhs-host" },
 835        { }
 836};
 837
 838MODULE_DEVICE_TABLE(of, usbhs_omap_dt_ids);
 839
 840
 841static struct platform_driver usbhs_omap_driver = {
 842        .driver = {
 843                .name           = (char *)usbhs_driver_name,
 844                .pm             = &usbhsomap_dev_pm_ops,
 845                .of_match_table = usbhs_omap_dt_ids,
 846        },
 847        .probe          = usbhs_omap_probe,
 848        .remove         = usbhs_omap_remove,
 849};
 850
 851MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>");
 852MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");
 853MODULE_ALIAS("platform:" USBHS_DRIVER_NAME);
 854MODULE_LICENSE("GPL v2");
 855MODULE_DESCRIPTION("usb host common core driver for omap EHCI and OHCI");
 856
 857static int omap_usbhs_drvinit(void)
 858{
 859        return platform_driver_register(&usbhs_omap_driver);
 860}
 861
 862/*
 863 * init before ehci and ohci drivers;
 864 * The usbhs core driver should be initialized much before
 865 * the omap ehci and ohci probe functions are called.
 866 * This usbhs core driver should be initialized after
 867 * usb tll driver
 868 */
 869fs_initcall_sync(omap_usbhs_drvinit);
 870
 871static void omap_usbhs_drvexit(void)
 872{
 873        platform_driver_unregister(&usbhs_omap_driver);
 874}
 875module_exit(omap_usbhs_drvexit);
 876