linux/drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0
   2/* Copyright(c) 2009-2012  Realtek Corporation.*/
   3
   4#include "../wifi.h"
   5#include "../efuse.h"
   6#include "../base.h"
   7#include "../regd.h"
   8#include "../cam.h"
   9#include "../ps.h"
  10#include "../pci.h"
  11#include "reg.h"
  12#include "def.h"
  13#include "phy.h"
  14#include "dm.h"
  15#include "fw.h"
  16#include "led.h"
  17#include "sw.h"
  18#include "hw.h"
  19
  20u32 rtl92de_read_dword_dbi(struct ieee80211_hw *hw, u16 offset, u8 direct)
  21{
  22        struct rtl_priv *rtlpriv = rtl_priv(hw);
  23        u32 value;
  24
  25        rtl_write_word(rtlpriv, REG_DBI_CTRL, (offset & 0xFFC));
  26        rtl_write_byte(rtlpriv, REG_DBI_FLAG, BIT(1) | direct);
  27        udelay(10);
  28        value = rtl_read_dword(rtlpriv, REG_DBI_RDATA);
  29        return value;
  30}
  31
  32void rtl92de_write_dword_dbi(struct ieee80211_hw *hw,
  33                             u16 offset, u32 value, u8 direct)
  34{
  35        struct rtl_priv *rtlpriv = rtl_priv(hw);
  36
  37        rtl_write_word(rtlpriv, REG_DBI_CTRL, ((offset & 0xFFC) | 0xF000));
  38        rtl_write_dword(rtlpriv, REG_DBI_WDATA, value);
  39        rtl_write_byte(rtlpriv, REG_DBI_FLAG, BIT(0) | direct);
  40}
  41
  42static void _rtl92de_set_bcn_ctrl_reg(struct ieee80211_hw *hw,
  43                                      u8 set_bits, u8 clear_bits)
  44{
  45        struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
  46        struct rtl_priv *rtlpriv = rtl_priv(hw);
  47
  48        rtlpci->reg_bcn_ctrl_val |= set_bits;
  49        rtlpci->reg_bcn_ctrl_val &= ~clear_bits;
  50        rtl_write_byte(rtlpriv, REG_BCN_CTRL, (u8) rtlpci->reg_bcn_ctrl_val);
  51}
  52
  53static void _rtl92de_stop_tx_beacon(struct ieee80211_hw *hw)
  54{
  55        struct rtl_priv *rtlpriv = rtl_priv(hw);
  56        u8 tmp1byte;
  57
  58        tmp1byte = rtl_read_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2);
  59        rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2, tmp1byte & (~BIT(6)));
  60        rtl_write_byte(rtlpriv, REG_BCN_MAX_ERR, 0xff);
  61        rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 1, 0x64);
  62        tmp1byte = rtl_read_byte(rtlpriv, REG_TBTT_PROHIBIT + 2);
  63        tmp1byte &= ~(BIT(0));
  64        rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 2, tmp1byte);
  65}
  66
  67static void _rtl92de_resume_tx_beacon(struct ieee80211_hw *hw)
  68{
  69        struct rtl_priv *rtlpriv = rtl_priv(hw);
  70        u8 tmp1byte;
  71
  72        tmp1byte = rtl_read_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2);
  73        rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2, tmp1byte | BIT(6));
  74        rtl_write_byte(rtlpriv, REG_BCN_MAX_ERR, 0x0a);
  75        rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 1, 0xff);
  76        tmp1byte = rtl_read_byte(rtlpriv, REG_TBTT_PROHIBIT + 2);
  77        tmp1byte |= BIT(0);
  78        rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 2, tmp1byte);
  79}
  80
  81static void _rtl92de_enable_bcn_sub_func(struct ieee80211_hw *hw)
  82{
  83        _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(1));
  84}
  85
  86static void _rtl92de_disable_bcn_sub_func(struct ieee80211_hw *hw)
  87{
  88        _rtl92de_set_bcn_ctrl_reg(hw, BIT(1), 0);
  89}
  90
  91void rtl92de_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
  92{
  93        struct rtl_priv *rtlpriv = rtl_priv(hw);
  94        struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
  95        struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
  96
  97        switch (variable) {
  98        case HW_VAR_RCR:
  99                *((u32 *) (val)) = rtlpci->receive_config;
 100                break;
 101        case HW_VAR_RF_STATE:
 102                *((enum rf_pwrstate *)(val)) = ppsc->rfpwr_state;
 103                break;
 104        case HW_VAR_FWLPS_RF_ON:{
 105                enum rf_pwrstate rfstate;
 106                u32 val_rcr;
 107
 108                rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RF_STATE,
 109                                              (u8 *)(&rfstate));
 110                if (rfstate == ERFOFF) {
 111                        *((bool *) (val)) = true;
 112                } else {
 113                        val_rcr = rtl_read_dword(rtlpriv, REG_RCR);
 114                        val_rcr &= 0x00070000;
 115                        if (val_rcr)
 116                                *((bool *) (val)) = false;
 117                        else
 118                                *((bool *) (val)) = true;
 119                }
 120                break;
 121        }
 122        case HW_VAR_FW_PSMODE_STATUS:
 123                *((bool *) (val)) = ppsc->fw_current_inpsmode;
 124                break;
 125        case HW_VAR_CORRECT_TSF:{
 126                u64 tsf;
 127                u32 *ptsf_low = (u32 *)&tsf;
 128                u32 *ptsf_high = ((u32 *)&tsf) + 1;
 129
 130                *ptsf_high = rtl_read_dword(rtlpriv, (REG_TSFTR + 4));
 131                *ptsf_low = rtl_read_dword(rtlpriv, REG_TSFTR);
 132                *((u64 *) (val)) = tsf;
 133                break;
 134        }
 135        case HW_VAR_INT_MIGRATION:
 136                *((bool *)(val)) = rtlpriv->dm.interrupt_migration;
 137                break;
 138        case HW_VAR_INT_AC:
 139                *((bool *)(val)) = rtlpriv->dm.disable_tx_int;
 140                break;
 141        case HAL_DEF_WOWLAN:
 142                break;
 143        default:
 144                pr_err("switch case %#x not processed\n", variable);
 145                break;
 146        }
 147}
 148
 149void rtl92de_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 150{
 151        struct rtl_priv *rtlpriv = rtl_priv(hw);
 152        struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 153        struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
 154        struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
 155        struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
 156        struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
 157        u8 idx;
 158
 159        switch (variable) {
 160        case HW_VAR_ETHER_ADDR:
 161                for (idx = 0; idx < ETH_ALEN; idx++) {
 162                        rtl_write_byte(rtlpriv, (REG_MACID + idx),
 163                                       val[idx]);
 164                }
 165                break;
 166        case HW_VAR_BASIC_RATE: {
 167                u16 rate_cfg = ((u16 *) val)[0];
 168                u8 rate_index = 0;
 169
 170                rate_cfg = rate_cfg & 0x15f;
 171                if (mac->vendor == PEER_CISCO &&
 172                    ((rate_cfg & 0x150) == 0))
 173                        rate_cfg |= 0x01;
 174                rtl_write_byte(rtlpriv, REG_RRSR, rate_cfg & 0xff);
 175                rtl_write_byte(rtlpriv, REG_RRSR + 1,
 176                               (rate_cfg >> 8) & 0xff);
 177                while (rate_cfg > 0x1) {
 178                        rate_cfg = (rate_cfg >> 1);
 179                        rate_index++;
 180                }
 181                if (rtlhal->fw_version > 0xe)
 182                        rtl_write_byte(rtlpriv, REG_INIRTS_RATE_SEL,
 183                                       rate_index);
 184                break;
 185        }
 186        case HW_VAR_BSSID:
 187                for (idx = 0; idx < ETH_ALEN; idx++) {
 188                        rtl_write_byte(rtlpriv, (REG_BSSID + idx),
 189                                       val[idx]);
 190                }
 191                break;
 192        case HW_VAR_SIFS:
 193                rtl_write_byte(rtlpriv, REG_SIFS_CTX + 1, val[0]);
 194                rtl_write_byte(rtlpriv, REG_SIFS_TRX + 1, val[1]);
 195                rtl_write_byte(rtlpriv, REG_SPEC_SIFS + 1, val[0]);
 196                rtl_write_byte(rtlpriv, REG_MAC_SPEC_SIFS + 1, val[0]);
 197                if (!mac->ht_enable)
 198                        rtl_write_word(rtlpriv, REG_RESP_SIFS_OFDM,
 199                                       0x0e0e);
 200                else
 201                        rtl_write_word(rtlpriv, REG_RESP_SIFS_OFDM,
 202                                       *((u16 *) val));
 203                break;
 204        case HW_VAR_SLOT_TIME: {
 205                u8 e_aci;
 206
 207                RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
 208                         "HW_VAR_SLOT_TIME %x\n", val[0]);
 209                rtl_write_byte(rtlpriv, REG_SLOT, val[0]);
 210                for (e_aci = 0; e_aci < AC_MAX; e_aci++)
 211                        rtlpriv->cfg->ops->set_hw_reg(hw,
 212                                                      HW_VAR_AC_PARAM,
 213                                                      (&e_aci));
 214                break;
 215        }
 216        case HW_VAR_ACK_PREAMBLE: {
 217                u8 reg_tmp;
 218                u8 short_preamble = (bool) (*val);
 219
 220                reg_tmp = (mac->cur_40_prime_sc) << 5;
 221                if (short_preamble)
 222                        reg_tmp |= 0x80;
 223                rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_tmp);
 224                break;
 225        }
 226        case HW_VAR_AMPDU_MIN_SPACE: {
 227                u8 min_spacing_to_set;
 228                u8 sec_min_space;
 229
 230                min_spacing_to_set = *val;
 231                if (min_spacing_to_set <= 7) {
 232                        sec_min_space = 0;
 233                        if (min_spacing_to_set < sec_min_space)
 234                                min_spacing_to_set = sec_min_space;
 235                        mac->min_space_cfg = ((mac->min_space_cfg & 0xf8) |
 236                                              min_spacing_to_set);
 237                        *val = min_spacing_to_set;
 238                        RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
 239                                 "Set HW_VAR_AMPDU_MIN_SPACE: %#x\n",
 240                                 mac->min_space_cfg);
 241                        rtl_write_byte(rtlpriv, REG_AMPDU_MIN_SPACE,
 242                                       mac->min_space_cfg);
 243                }
 244                break;
 245        }
 246        case HW_VAR_SHORTGI_DENSITY: {
 247                u8 density_to_set;
 248
 249                density_to_set = *val;
 250                mac->min_space_cfg = rtlpriv->rtlhal.minspace_cfg;
 251                mac->min_space_cfg |= (density_to_set << 3);
 252                RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
 253                         "Set HW_VAR_SHORTGI_DENSITY: %#x\n",
 254                         mac->min_space_cfg);
 255                rtl_write_byte(rtlpriv, REG_AMPDU_MIN_SPACE,
 256                               mac->min_space_cfg);
 257                break;
 258        }
 259        case HW_VAR_AMPDU_FACTOR: {
 260                u8 factor_toset;
 261                u32 regtoset;
 262                u8 *ptmp_byte = NULL;
 263                u8 index;
 264
 265                if (rtlhal->macphymode == DUALMAC_DUALPHY)
 266                        regtoset = 0xb9726641;
 267                else if (rtlhal->macphymode == DUALMAC_SINGLEPHY)
 268                        regtoset = 0x66626641;
 269                else
 270                        regtoset = 0xb972a841;
 271                factor_toset = *val;
 272                if (factor_toset <= 3) {
 273                        factor_toset = (1 << (factor_toset + 2));
 274                        if (factor_toset > 0xf)
 275                                factor_toset = 0xf;
 276                        for (index = 0; index < 4; index++) {
 277                                ptmp_byte = (u8 *)(&regtoset) + index;
 278                                if ((*ptmp_byte & 0xf0) >
 279                                    (factor_toset << 4))
 280                                        *ptmp_byte = (*ptmp_byte & 0x0f)
 281                                                 | (factor_toset << 4);
 282                                if ((*ptmp_byte & 0x0f) > factor_toset)
 283                                        *ptmp_byte = (*ptmp_byte & 0xf0)
 284                                                     | (factor_toset);
 285                        }
 286                        rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, regtoset);
 287                        RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
 288                                 "Set HW_VAR_AMPDU_FACTOR: %#x\n",
 289                                 factor_toset);
 290                }
 291                break;
 292        }
 293        case HW_VAR_AC_PARAM: {
 294                u8 e_aci = *val;
 295                rtl92d_dm_init_edca_turbo(hw);
 296                if (rtlpci->acm_method != EACMWAY2_SW)
 297                        rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ACM_CTRL,
 298                                                      &e_aci);
 299                break;
 300        }
 301        case HW_VAR_ACM_CTRL: {
 302                u8 e_aci = *val;
 303                union aci_aifsn *p_aci_aifsn =
 304                    (union aci_aifsn *)(&(mac->ac[0].aifs));
 305                u8 acm = p_aci_aifsn->f.acm;
 306                u8 acm_ctrl = rtl_read_byte(rtlpriv, REG_ACMHWCTRL);
 307
 308                acm_ctrl = acm_ctrl | ((rtlpci->acm_method == 2) ?  0x0 : 0x1);
 309                if (acm) {
 310                        switch (e_aci) {
 311                        case AC0_BE:
 312                                acm_ctrl |= ACMHW_BEQEN;
 313                                break;
 314                        case AC2_VI:
 315                                acm_ctrl |= ACMHW_VIQEN;
 316                                break;
 317                        case AC3_VO:
 318                                acm_ctrl |= ACMHW_VOQEN;
 319                                break;
 320                        default:
 321                                RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
 322                                         "HW_VAR_ACM_CTRL acm set failed: eACI is %d\n",
 323                                         acm);
 324                                break;
 325                        }
 326                } else {
 327                        switch (e_aci) {
 328                        case AC0_BE:
 329                                acm_ctrl &= (~ACMHW_BEQEN);
 330                                break;
 331                        case AC2_VI:
 332                                acm_ctrl &= (~ACMHW_VIQEN);
 333                                break;
 334                        case AC3_VO:
 335                                acm_ctrl &= (~ACMHW_VOQEN);
 336                                break;
 337                        default:
 338                                pr_err("switch case %#x not processed\n",
 339                                       e_aci);
 340                                break;
 341                        }
 342                }
 343                RT_TRACE(rtlpriv, COMP_QOS, DBG_TRACE,
 344                         "SetHwReg8190pci(): [HW_VAR_ACM_CTRL] Write 0x%X\n",
 345                         acm_ctrl);
 346                rtl_write_byte(rtlpriv, REG_ACMHWCTRL, acm_ctrl);
 347                break;
 348        }
 349        case HW_VAR_RCR:
 350                rtl_write_dword(rtlpriv, REG_RCR, ((u32 *) (val))[0]);
 351                rtlpci->receive_config = ((u32 *) (val))[0];
 352                break;
 353        case HW_VAR_RETRY_LIMIT: {
 354                u8 retry_limit = val[0];
 355
 356                rtl_write_word(rtlpriv, REG_RL,
 357                               retry_limit << RETRY_LIMIT_SHORT_SHIFT |
 358                               retry_limit << RETRY_LIMIT_LONG_SHIFT);
 359                break;
 360        }
 361        case HW_VAR_DUAL_TSF_RST:
 362                rtl_write_byte(rtlpriv, REG_DUAL_TSF_RST, (BIT(0) | BIT(1)));
 363                break;
 364        case HW_VAR_EFUSE_BYTES:
 365                rtlefuse->efuse_usedbytes = *((u16 *) val);
 366                break;
 367        case HW_VAR_EFUSE_USAGE:
 368                rtlefuse->efuse_usedpercentage = *val;
 369                break;
 370        case HW_VAR_IO_CMD:
 371                rtl92d_phy_set_io_cmd(hw, (*(enum io_type *)val));
 372                break;
 373        case HW_VAR_WPA_CONFIG:
 374                rtl_write_byte(rtlpriv, REG_SECCFG, *val);
 375                break;
 376        case HW_VAR_SET_RPWM:
 377                rtl92d_fill_h2c_cmd(hw, H2C_PWRM, 1, (val));
 378                break;
 379        case HW_VAR_H2C_FW_PWRMODE:
 380                break;
 381        case HW_VAR_FW_PSMODE_STATUS:
 382                ppsc->fw_current_inpsmode = *((bool *) val);
 383                break;
 384        case HW_VAR_H2C_FW_JOINBSSRPT: {
 385                u8 mstatus = (*val);
 386                u8 tmp_regcr, tmp_reg422;
 387                bool recover = false;
 388
 389                if (mstatus == RT_MEDIA_CONNECT) {
 390                        rtlpriv->cfg->ops->set_hw_reg(hw,
 391                                                      HW_VAR_AID, NULL);
 392                        tmp_regcr = rtl_read_byte(rtlpriv, REG_CR + 1);
 393                        rtl_write_byte(rtlpriv, REG_CR + 1,
 394                                       (tmp_regcr | BIT(0)));
 395                        _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(3));
 396                        _rtl92de_set_bcn_ctrl_reg(hw, BIT(4), 0);
 397                        tmp_reg422 = rtl_read_byte(rtlpriv,
 398                                                 REG_FWHW_TXQ_CTRL + 2);
 399                        if (tmp_reg422 & BIT(6))
 400                                recover = true;
 401                        rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2,
 402                                       tmp_reg422 & (~BIT(6)));
 403                        rtl92d_set_fw_rsvdpagepkt(hw, 0);
 404                        _rtl92de_set_bcn_ctrl_reg(hw, BIT(3), 0);
 405                        _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(4));
 406                        if (recover)
 407                                rtl_write_byte(rtlpriv,
 408                                               REG_FWHW_TXQ_CTRL + 2,
 409                                               tmp_reg422);
 410                        rtl_write_byte(rtlpriv, REG_CR + 1,
 411                                       (tmp_regcr & ~(BIT(0))));
 412                }
 413                rtl92d_set_fw_joinbss_report_cmd(hw, (*val));
 414                break;
 415        }
 416        case HW_VAR_AID: {
 417                u16 u2btmp;
 418                u2btmp = rtl_read_word(rtlpriv, REG_BCN_PSR_RPT);
 419                u2btmp &= 0xC000;
 420                rtl_write_word(rtlpriv, REG_BCN_PSR_RPT, (u2btmp |
 421                               mac->assoc_id));
 422                break;
 423        }
 424        case HW_VAR_CORRECT_TSF: {
 425                u8 btype_ibss = val[0];
 426
 427                if (btype_ibss)
 428                        _rtl92de_stop_tx_beacon(hw);
 429                _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(3));
 430                rtl_write_dword(rtlpriv, REG_TSFTR,
 431                                (u32) (mac->tsf & 0xffffffff));
 432                rtl_write_dword(rtlpriv, REG_TSFTR + 4,
 433                                (u32) ((mac->tsf >> 32) & 0xffffffff));
 434                _rtl92de_set_bcn_ctrl_reg(hw, BIT(3), 0);
 435                if (btype_ibss)
 436                        _rtl92de_resume_tx_beacon(hw);
 437
 438                break;
 439        }
 440        case HW_VAR_INT_MIGRATION: {
 441                bool int_migration = *(bool *) (val);
 442
 443                if (int_migration) {
 444                        /* Set interrupt migration timer and
 445                         * corresponding Tx/Rx counter.
 446                         * timer 25ns*0xfa0=100us for 0xf packets.
 447                         * 0x306:Rx, 0x307:Tx */
 448                        rtl_write_dword(rtlpriv, REG_INT_MIG, 0xfe000fa0);
 449                        rtlpriv->dm.interrupt_migration = int_migration;
 450                } else {
 451                        /* Reset all interrupt migration settings. */
 452                        rtl_write_dword(rtlpriv, REG_INT_MIG, 0);
 453                        rtlpriv->dm.interrupt_migration = int_migration;
 454                }
 455                break;
 456        }
 457        case HW_VAR_INT_AC: {
 458                bool disable_ac_int = *((bool *) val);
 459
 460                /* Disable four ACs interrupts. */
 461                if (disable_ac_int) {
 462                        /* Disable VO, VI, BE and BK four AC interrupts
 463                         * to gain more efficient CPU utilization.
 464                         * When extremely highly Rx OK occurs,
 465                         * we will disable Tx interrupts.
 466                         */
 467                        rtlpriv->cfg->ops->update_interrupt_mask(hw, 0,
 468                                                 RT_AC_INT_MASKS);
 469                        rtlpriv->dm.disable_tx_int = disable_ac_int;
 470                /* Enable four ACs interrupts. */
 471                } else {
 472                        rtlpriv->cfg->ops->update_interrupt_mask(hw,
 473                                                 RT_AC_INT_MASKS, 0);
 474                        rtlpriv->dm.disable_tx_int = disable_ac_int;
 475                }
 476                break;
 477        }
 478        default:
 479                pr_err("switch case %#x not processed\n", variable);
 480                break;
 481        }
 482}
 483
 484static bool _rtl92de_llt_write(struct ieee80211_hw *hw, u32 address, u32 data)
 485{
 486        struct rtl_priv *rtlpriv = rtl_priv(hw);
 487        bool status = true;
 488        long count = 0;
 489        u32 value = _LLT_INIT_ADDR(address) |
 490            _LLT_INIT_DATA(data) | _LLT_OP(_LLT_WRITE_ACCESS);
 491
 492        rtl_write_dword(rtlpriv, REG_LLT_INIT, value);
 493        do {
 494                value = rtl_read_dword(rtlpriv, REG_LLT_INIT);
 495                if (_LLT_NO_ACTIVE == _LLT_OP_VALUE(value))
 496                        break;
 497                if (count > POLLING_LLT_THRESHOLD) {
 498                        pr_err("Failed to polling write LLT done at address %d!\n",
 499                               address);
 500                        status = false;
 501                        break;
 502                }
 503        } while (++count);
 504        return status;
 505}
 506
 507static bool _rtl92de_llt_table_init(struct ieee80211_hw *hw)
 508{
 509        struct rtl_priv *rtlpriv = rtl_priv(hw);
 510        unsigned short i;
 511        u8 txpktbuf_bndy;
 512        u8 maxpage;
 513        bool status;
 514        u32 value32; /* High+low page number */
 515        u8 value8;       /* normal page number */
 516
 517        if (rtlpriv->rtlhal.macphymode == SINGLEMAC_SINGLEPHY) {
 518                maxpage = 255;
 519                txpktbuf_bndy = 246;
 520                value8 = 0;
 521                value32 = 0x80bf0d29;
 522        } else {
 523                maxpage = 127;
 524                txpktbuf_bndy = 123;
 525                value8 = 0;
 526                value32 = 0x80750005;
 527        }
 528
 529        /* Set reserved page for each queue */
 530        /* 11.  RQPN 0x200[31:0] = 0x80BD1C1C */
 531        /* load RQPN */
 532        rtl_write_byte(rtlpriv, REG_RQPN_NPQ, value8);
 533        rtl_write_dword(rtlpriv, REG_RQPN, value32);
 534
 535        /* 12.  TXRKTBUG_PG_BNDY 0x114[31:0] = 0x27FF00F6 */
 536        /* TXRKTBUG_PG_BNDY */
 537        rtl_write_dword(rtlpriv, REG_TRXFF_BNDY,
 538                        (rtl_read_word(rtlpriv, REG_TRXFF_BNDY + 2) << 16 |
 539                        txpktbuf_bndy));
 540
 541        /* 13.  TDECTRL[15:8] 0x209[7:0] = 0xF6 */
 542        /* Beacon Head for TXDMA */
 543        rtl_write_byte(rtlpriv, REG_TDECTRL + 1, txpktbuf_bndy);
 544
 545        /* 14.  BCNQ_PGBNDY 0x424[7:0] =  0xF6 */
 546        /* BCNQ_PGBNDY */
 547        rtl_write_byte(rtlpriv, REG_TXPKTBUF_BCNQ_BDNY, txpktbuf_bndy);
 548        rtl_write_byte(rtlpriv, REG_TXPKTBUF_MGQ_BDNY, txpktbuf_bndy);
 549
 550        /* 15.  WMAC_LBK_BF_HD 0x45D[7:0] =  0xF6 */
 551        /* WMAC_LBK_BF_HD */
 552        rtl_write_byte(rtlpriv, 0x45D, txpktbuf_bndy);
 553
 554        /* Set Tx/Rx page size (Tx must be 128 Bytes, */
 555        /* Rx can be 64,128,256,512,1024 bytes) */
 556        /* 16.  PBP [7:0] = 0x11 */
 557        /* TRX page size */
 558        rtl_write_byte(rtlpriv, REG_PBP, 0x11);
 559
 560        /* 17.  DRV_INFO_SZ = 0x04 */
 561        rtl_write_byte(rtlpriv, REG_RX_DRVINFO_SZ, 0x4);
 562
 563        /* 18.  LLT_table_init(Adapter);  */
 564        for (i = 0; i < (txpktbuf_bndy - 1); i++) {
 565                status = _rtl92de_llt_write(hw, i, i + 1);
 566                if (true != status)
 567                        return status;
 568        }
 569
 570        /* end of list */
 571        status = _rtl92de_llt_write(hw, (txpktbuf_bndy - 1), 0xFF);
 572        if (true != status)
 573                return status;
 574
 575        /* Make the other pages as ring buffer */
 576        /* This ring buffer is used as beacon buffer if we */
 577        /* config this MAC as two MAC transfer. */
 578        /* Otherwise used as local loopback buffer.  */
 579        for (i = txpktbuf_bndy; i < maxpage; i++) {
 580                status = _rtl92de_llt_write(hw, i, (i + 1));
 581                if (true != status)
 582                        return status;
 583        }
 584
 585        /* Let last entry point to the start entry of ring buffer */
 586        status = _rtl92de_llt_write(hw, maxpage, txpktbuf_bndy);
 587        if (true != status)
 588                return status;
 589
 590        return true;
 591}
 592
 593static void _rtl92de_gen_refresh_led_state(struct ieee80211_hw *hw)
 594{
 595        struct rtl_priv *rtlpriv = rtl_priv(hw);
 596        struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 597        struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
 598        struct rtl_led *pled0 = &rtlpriv->ledctl.sw_led0;
 599
 600        if (rtlpci->up_first_time)
 601                return;
 602        if (ppsc->rfoff_reason == RF_CHANGE_BY_IPS)
 603                rtl92de_sw_led_on(hw, pled0);
 604        else if (ppsc->rfoff_reason == RF_CHANGE_BY_INIT)
 605                rtl92de_sw_led_on(hw, pled0);
 606        else
 607                rtl92de_sw_led_off(hw, pled0);
 608}
 609
 610static bool _rtl92de_init_mac(struct ieee80211_hw *hw)
 611{
 612        struct rtl_priv *rtlpriv = rtl_priv(hw);
 613        struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 614        unsigned char bytetmp;
 615        unsigned short wordtmp;
 616        u16 retry;
 617
 618        rtl92d_phy_set_poweron(hw);
 619        /* Add for resume sequence of power domain according
 620         * to power document V11. Chapter V.11....  */
 621        /* 0.   RSV_CTRL 0x1C[7:0] = 0x00  */
 622        /* unlock ISO/CLK/Power control register */
 623        rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0x00);
 624        rtl_write_byte(rtlpriv, REG_LDOA15_CTRL, 0x05);
 625
 626        /* 1.   AFE_XTAL_CTRL [7:0] = 0x0F  enable XTAL */
 627        /* 2.   SPS0_CTRL 0x11[7:0] = 0x2b  enable SPS into PWM mode  */
 628        /* 3.   delay (1ms) this is not necessary when initially power on */
 629
 630        /* C.   Resume Sequence */
 631        /* a.   SPS0_CTRL 0x11[7:0] = 0x2b */
 632        rtl_write_byte(rtlpriv, REG_SPS0_CTRL, 0x2b);
 633
 634        /* b.   AFE_XTAL_CTRL [7:0] = 0x0F */
 635        rtl_write_byte(rtlpriv, REG_AFE_XTAL_CTRL, 0x0F);
 636
 637        /* c.   DRV runs power on init flow */
 638
 639        /* auto enable WLAN */
 640        /* 4.   APS_FSMCO 0x04[8] = 1; wait till 0x04[8] = 0   */
 641        /* Power On Reset for MAC Block */
 642        bytetmp = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 1) | BIT(0);
 643        udelay(2);
 644        rtl_write_byte(rtlpriv, REG_APS_FSMCO + 1, bytetmp);
 645        udelay(2);
 646
 647        /* 5.   Wait while 0x04[8] == 0 goto 2, otherwise goto 1 */
 648        bytetmp = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 1);
 649        udelay(50);
 650        retry = 0;
 651        while ((bytetmp & BIT(0)) && retry < 1000) {
 652                retry++;
 653                bytetmp = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 1);
 654                udelay(50);
 655        }
 656
 657        /* Enable Radio off, GPIO, and LED function */
 658        /* 6.   APS_FSMCO 0x04[15:0] = 0x0012  when enable HWPDN */
 659        rtl_write_word(rtlpriv, REG_APS_FSMCO, 0x1012);
 660
 661        /* release RF digital isolation  */
 662        /* 7.  SYS_ISO_CTRL 0x01[1]    = 0x0;  */
 663        /*Set REG_SYS_ISO_CTRL 0x1=0x82 to prevent wake# problem. */
 664        rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL + 1, 0x82);
 665        udelay(2);
 666
 667        /* make sure that BB reset OK. */
 668        /* rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE3); */
 669
 670        /* Disable REG_CR before enable it to assure reset */
 671        rtl_write_word(rtlpriv, REG_CR, 0x0);
 672
 673        /* Release MAC IO register reset */
 674        rtl_write_word(rtlpriv, REG_CR, 0x2ff);
 675
 676        /* clear stopping tx/rx dma   */
 677        rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 1, 0x0);
 678
 679        /* rtl_write_word(rtlpriv,REG_CR+2, 0x2); */
 680
 681        /* System init */
 682        /* 18.  LLT_table_init(Adapter);  */
 683        if (!_rtl92de_llt_table_init(hw))
 684                return false;
 685
 686        /* Clear interrupt and enable interrupt */
 687        /* 19.  HISR 0x124[31:0] = 0xffffffff;  */
 688        /*      HISRE 0x12C[7:0] = 0xFF */
 689        rtl_write_dword(rtlpriv, REG_HISR, 0xffffffff);
 690        rtl_write_byte(rtlpriv, REG_HISRE, 0xff);
 691
 692        /* 20.  HIMR 0x120[31:0] |= [enable INT mask bit map];  */
 693        /* 21.  HIMRE 0x128[7:0] = [enable INT mask bit map] */
 694        /* The IMR should be enabled later after all init sequence
 695         * is finished. */
 696
 697        /* 22.  PCIE configuration space configuration */
 698        /* 23.  Ensure PCIe Device 0x80[15:0] = 0x0143 (ASPM+CLKREQ),  */
 699        /*      and PCIe gated clock function is enabled.    */
 700        /* PCIE configuration space will be written after
 701         * all init sequence.(Or by BIOS) */
 702
 703        rtl92d_phy_config_maccoexist_rfpage(hw);
 704
 705        /* THe below section is not related to power document Vxx . */
 706        /* This is only useful for driver and OS setting. */
 707        /* -------------------Software Relative Setting---------------------- */
 708        wordtmp = rtl_read_word(rtlpriv, REG_TRXDMA_CTRL);
 709        wordtmp &= 0xf;
 710        wordtmp |= 0xF771;
 711        rtl_write_word(rtlpriv, REG_TRXDMA_CTRL, wordtmp);
 712
 713        /* Reported Tx status from HW for rate adaptive. */
 714        /* This should be realtive to power on step 14. But in document V11  */
 715        /* still not contain the description.!!! */
 716        rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 1, 0x1F);
 717
 718        /* Set Tx/Rx page size (Tx must be 128 Bytes,
 719         * Rx can be 64,128,256,512,1024 bytes) */
 720        /* rtl_write_byte(rtlpriv,REG_PBP, 0x11); */
 721
 722        /* Set RCR register */
 723        rtl_write_dword(rtlpriv, REG_RCR, rtlpci->receive_config);
 724        /* rtl_write_byte(rtlpriv,REG_RX_DRVINFO_SZ, 4); */
 725
 726        /*  Set TCR register */
 727        rtl_write_dword(rtlpriv, REG_TCR, rtlpci->transmit_config);
 728
 729        /* disable earlymode */
 730        rtl_write_byte(rtlpriv, 0x4d0, 0x0);
 731
 732        /* Set TX/RX descriptor physical address(from OS API). */
 733        rtl_write_dword(rtlpriv, REG_BCNQ_DESA,
 734                        rtlpci->tx_ring[BEACON_QUEUE].dma);
 735        rtl_write_dword(rtlpriv, REG_MGQ_DESA, rtlpci->tx_ring[MGNT_QUEUE].dma);
 736        rtl_write_dword(rtlpriv, REG_VOQ_DESA, rtlpci->tx_ring[VO_QUEUE].dma);
 737        rtl_write_dword(rtlpriv, REG_VIQ_DESA, rtlpci->tx_ring[VI_QUEUE].dma);
 738        rtl_write_dword(rtlpriv, REG_BEQ_DESA, rtlpci->tx_ring[BE_QUEUE].dma);
 739        rtl_write_dword(rtlpriv, REG_BKQ_DESA, rtlpci->tx_ring[BK_QUEUE].dma);
 740        rtl_write_dword(rtlpriv, REG_HQ_DESA, rtlpci->tx_ring[HIGH_QUEUE].dma);
 741        /* Set RX Desc Address */
 742        rtl_write_dword(rtlpriv, REG_RX_DESA,
 743                        rtlpci->rx_ring[RX_MPDU_QUEUE].dma);
 744
 745        /* if we want to support 64 bit DMA, we should set it here,
 746         * but now we do not support 64 bit DMA*/
 747
 748        rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 3, 0x33);
 749
 750        /* Reset interrupt migration setting when initialization */
 751        rtl_write_dword(rtlpriv, REG_INT_MIG, 0);
 752
 753        /* Reconsider when to do this operation after asking HWSD. */
 754        bytetmp = rtl_read_byte(rtlpriv, REG_APSD_CTRL);
 755        rtl_write_byte(rtlpriv, REG_APSD_CTRL, bytetmp & ~BIT(6));
 756        do {
 757                retry++;
 758                bytetmp = rtl_read_byte(rtlpriv, REG_APSD_CTRL);
 759        } while ((retry < 200) && !(bytetmp & BIT(7)));
 760
 761        /* After MACIO reset,we must refresh LED state. */
 762        _rtl92de_gen_refresh_led_state(hw);
 763
 764        /* Reset H2C protection register */
 765        rtl_write_dword(rtlpriv, REG_MCUTST_1, 0x0);
 766
 767        return true;
 768}
 769
 770static void _rtl92de_hw_configure(struct ieee80211_hw *hw)
 771{
 772        struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 773        struct rtl_priv *rtlpriv = rtl_priv(hw);
 774        struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
 775        u8 reg_bw_opmode = BW_OPMODE_20MHZ;
 776        u32 reg_rrsr;
 777
 778        reg_rrsr = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
 779        rtl_write_byte(rtlpriv, REG_INIRTS_RATE_SEL, 0x8);
 780        rtl_write_byte(rtlpriv, REG_BWOPMODE, reg_bw_opmode);
 781        rtl_write_dword(rtlpriv, REG_RRSR, reg_rrsr);
 782        rtl_write_byte(rtlpriv, REG_SLOT, 0x09);
 783        rtl_write_byte(rtlpriv, REG_AMPDU_MIN_SPACE, 0x0);
 784        rtl_write_word(rtlpriv, REG_FWHW_TXQ_CTRL, 0x1F80);
 785        rtl_write_word(rtlpriv, REG_RL, 0x0707);
 786        rtl_write_dword(rtlpriv, REG_BAR_MODE_CTRL, 0x02012802);
 787        rtl_write_byte(rtlpriv, REG_HWSEQ_CTRL, 0xFF);
 788        rtl_write_dword(rtlpriv, REG_DARFRC, 0x01000000);
 789        rtl_write_dword(rtlpriv, REG_DARFRC + 4, 0x07060504);
 790        rtl_write_dword(rtlpriv, REG_RARFRC, 0x01000000);
 791        rtl_write_dword(rtlpriv, REG_RARFRC + 4, 0x07060504);
 792        /* Aggregation threshold */
 793        if (rtlhal->macphymode == DUALMAC_DUALPHY)
 794                rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, 0xb9726641);
 795        else if (rtlhal->macphymode == DUALMAC_SINGLEPHY)
 796                rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, 0x66626641);
 797        else
 798                rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, 0xb972a841);
 799        rtl_write_byte(rtlpriv, REG_ATIMWND, 0x2);
 800        rtl_write_byte(rtlpriv, REG_BCN_MAX_ERR, 0x0a);
 801        rtlpci->reg_bcn_ctrl_val = 0x1f;
 802        rtl_write_byte(rtlpriv, REG_BCN_CTRL, rtlpci->reg_bcn_ctrl_val);
 803        rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 1, 0xff);
 804        rtl_write_byte(rtlpriv, REG_PIFS, 0x1C);
 805        rtl_write_byte(rtlpriv, REG_AGGR_BREAK_TIME, 0x16);
 806        rtl_write_word(rtlpriv, REG_NAV_PROT_LEN, 0x0020);
 807        /* For throughput */
 808        rtl_write_word(rtlpriv, REG_FAST_EDCA_CTRL, 0x6666);
 809        /* ACKTO for IOT issue. */
 810        rtl_write_byte(rtlpriv, REG_ACKTO, 0x40);
 811        /* Set Spec SIFS (used in NAV) */
 812        rtl_write_word(rtlpriv, REG_SPEC_SIFS, 0x1010);
 813        rtl_write_word(rtlpriv, REG_MAC_SPEC_SIFS, 0x1010);
 814        /* Set SIFS for CCK */
 815        rtl_write_word(rtlpriv, REG_SIFS_CTX, 0x1010);
 816        /* Set SIFS for OFDM */
 817        rtl_write_word(rtlpriv, REG_SIFS_TRX, 0x1010);
 818        /* Set Multicast Address. */
 819        rtl_write_dword(rtlpriv, REG_MAR, 0xffffffff);
 820        rtl_write_dword(rtlpriv, REG_MAR + 4, 0xffffffff);
 821        switch (rtlpriv->phy.rf_type) {
 822        case RF_1T2R:
 823        case RF_1T1R:
 824                rtlhal->minspace_cfg = (MAX_MSS_DENSITY_1T << 3);
 825                break;
 826        case RF_2T2R:
 827        case RF_2T2R_GREEN:
 828                rtlhal->minspace_cfg = (MAX_MSS_DENSITY_2T << 3);
 829                break;
 830        }
 831}
 832
 833static void _rtl92de_enable_aspm_back_door(struct ieee80211_hw *hw)
 834{
 835        struct rtl_priv *rtlpriv = rtl_priv(hw);
 836        struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
 837
 838        rtl_write_byte(rtlpriv, 0x34b, 0x93);
 839        rtl_write_word(rtlpriv, 0x350, 0x870c);
 840        rtl_write_byte(rtlpriv, 0x352, 0x1);
 841        if (ppsc->support_backdoor)
 842                rtl_write_byte(rtlpriv, 0x349, 0x1b);
 843        else
 844                rtl_write_byte(rtlpriv, 0x349, 0x03);
 845        rtl_write_word(rtlpriv, 0x350, 0x2718);
 846        rtl_write_byte(rtlpriv, 0x352, 0x1);
 847}
 848
 849void rtl92de_enable_hw_security_config(struct ieee80211_hw *hw)
 850{
 851        struct rtl_priv *rtlpriv = rtl_priv(hw);
 852        u8 sec_reg_value;
 853
 854        RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
 855                 "PairwiseEncAlgorithm = %d GroupEncAlgorithm = %d\n",
 856                 rtlpriv->sec.pairwise_enc_algorithm,
 857                 rtlpriv->sec.group_enc_algorithm);
 858        if (rtlpriv->cfg->mod_params->sw_crypto || rtlpriv->sec.use_sw_sec) {
 859                RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
 860                         "not open hw encryption\n");
 861                return;
 862        }
 863        sec_reg_value = SCR_TXENCENABLE | SCR_RXENCENABLE;
 864        if (rtlpriv->sec.use_defaultkey) {
 865                sec_reg_value |= SCR_TXUSEDK;
 866                sec_reg_value |= SCR_RXUSEDK;
 867        }
 868        sec_reg_value |= (SCR_RXBCUSEDK | SCR_TXBCUSEDK);
 869        rtl_write_byte(rtlpriv, REG_CR + 1, 0x02);
 870        RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
 871                 "The SECR-value %x\n", sec_reg_value);
 872        rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_WPA_CONFIG, &sec_reg_value);
 873}
 874
 875int rtl92de_hw_init(struct ieee80211_hw *hw)
 876{
 877        struct rtl_priv *rtlpriv = rtl_priv(hw);
 878        struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
 879        struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
 880        struct rtl_phy *rtlphy = &(rtlpriv->phy);
 881        struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 882        struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
 883        bool rtstatus = true;
 884        u8 tmp_u1b;
 885        int i;
 886        int err;
 887        unsigned long flags;
 888
 889        rtlpci->being_init_adapter = true;
 890        rtlpci->init_ready = false;
 891        spin_lock_irqsave(&globalmutex_for_power_and_efuse, flags);
 892        /* we should do iqk after disable/enable */
 893        rtl92d_phy_reset_iqk_result(hw);
 894        /* rtlpriv->intf_ops->disable_aspm(hw); */
 895        rtstatus = _rtl92de_init_mac(hw);
 896        if (!rtstatus) {
 897                pr_err("Init MAC failed\n");
 898                err = 1;
 899                spin_unlock_irqrestore(&globalmutex_for_power_and_efuse, flags);
 900                return err;
 901        }
 902        err = rtl92d_download_fw(hw);
 903        spin_unlock_irqrestore(&globalmutex_for_power_and_efuse, flags);
 904        if (err) {
 905                RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
 906                         "Failed to download FW. Init HW without FW..\n");
 907                return 1;
 908        }
 909        rtlhal->last_hmeboxnum = 0;
 910        rtlpriv->psc.fw_current_inpsmode = false;
 911
 912        tmp_u1b = rtl_read_byte(rtlpriv, 0x605);
 913        tmp_u1b = tmp_u1b | 0x30;
 914        rtl_write_byte(rtlpriv, 0x605, tmp_u1b);
 915
 916        if (rtlhal->earlymode_enable) {
 917                RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
 918                         "EarlyMode Enabled!!!\n");
 919
 920                tmp_u1b = rtl_read_byte(rtlpriv, 0x4d0);
 921                tmp_u1b = tmp_u1b | 0x1f;
 922                rtl_write_byte(rtlpriv, 0x4d0, tmp_u1b);
 923
 924                rtl_write_byte(rtlpriv, 0x4d3, 0x80);
 925
 926                tmp_u1b = rtl_read_byte(rtlpriv, 0x605);
 927                tmp_u1b = tmp_u1b | 0x40;
 928                rtl_write_byte(rtlpriv, 0x605, tmp_u1b);
 929        }
 930
 931        if (mac->rdg_en) {
 932                rtl_write_byte(rtlpriv, REG_RD_CTRL, 0xff);
 933                rtl_write_word(rtlpriv, REG_RD_NAV_NXT, 0x200);
 934                rtl_write_byte(rtlpriv, REG_RD_RESP_PKT_TH, 0x05);
 935        }
 936
 937        rtl92d_phy_mac_config(hw);
 938        /* because last function modify RCR, so we update
 939         * rcr var here, or TP will unstable for receive_config
 940         * is wrong, RX RCR_ACRC32 will cause TP unstabel & Rx
 941         * RCR_APP_ICV will cause mac80211 unassoc for cisco 1252*/
 942        rtlpci->receive_config = rtl_read_dword(rtlpriv, REG_RCR);
 943        rtlpci->receive_config &= ~(RCR_ACRC32 | RCR_AICV);
 944
 945        rtl92d_phy_bb_config(hw);
 946
 947        rtlphy->rf_mode = RF_OP_BY_SW_3WIRE;
 948        /* set before initialize RF */
 949        rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER4, 0x00f00000, 0xf);
 950
 951        /* config RF */
 952        rtl92d_phy_rf_config(hw);
 953
 954        /* After read predefined TXT, we must set BB/MAC/RF
 955         * register as our requirement */
 956        /* After load BB,RF params,we need do more for 92D. */
 957        rtl92d_update_bbrf_configuration(hw);
 958        /* set default value after initialize RF,  */
 959        rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER4, 0x00f00000, 0);
 960        rtlphy->rfreg_chnlval[0] = rtl_get_rfreg(hw, (enum radio_path)0,
 961                        RF_CHNLBW, RFREG_OFFSET_MASK);
 962        rtlphy->rfreg_chnlval[1] = rtl_get_rfreg(hw, (enum radio_path)1,
 963                        RF_CHNLBW, RFREG_OFFSET_MASK);
 964
 965        /*---- Set CCK and OFDM Block "ON"----*/
 966        if (rtlhal->current_bandtype == BAND_ON_2_4G)
 967                rtl_set_bbreg(hw, RFPGA0_RFMOD, BCCKEN, 0x1);
 968        rtl_set_bbreg(hw, RFPGA0_RFMOD, BOFDMEN, 0x1);
 969        if (rtlhal->interfaceindex == 0) {
 970                /* RFPGA0_ANALOGPARAMETER2: cck clock select,
 971                 *  set to 20MHz by default */
 972                rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER2, BIT(10) |
 973                              BIT(11), 3);
 974        } else {
 975                /* Mac1 */
 976                rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER2, BIT(11) |
 977                              BIT(10), 3);
 978        }
 979
 980        _rtl92de_hw_configure(hw);
 981
 982        /* reset hw sec */
 983        rtl_cam_reset_all_entry(hw);
 984        rtl92de_enable_hw_security_config(hw);
 985
 986        /* Read EEPROM TX power index and PHY_REG_PG.txt to capture correct */
 987        /* TX power index for different rate set. */
 988        rtl92d_phy_get_hw_reg_originalvalue(hw);
 989        rtl92d_phy_set_txpower_level(hw, rtlphy->current_channel);
 990
 991        ppsc->rfpwr_state = ERFON;
 992
 993        rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ETHER_ADDR, mac->mac_addr);
 994
 995        _rtl92de_enable_aspm_back_door(hw);
 996        /* rtlpriv->intf_ops->enable_aspm(hw); */
 997
 998        rtl92d_dm_init(hw);
 999        rtlpci->being_init_adapter = false;
1000
1001        if (ppsc->rfpwr_state == ERFON) {
1002                rtl92d_phy_lc_calibrate(hw);
1003                /* 5G and 2.4G must wait sometime to let RF LO ready */
1004                if (rtlhal->macphymode == DUALMAC_DUALPHY) {
1005                        u32 tmp_rega;
1006                        for (i = 0; i < 10000; i++) {
1007                                udelay(MAX_STALL_TIME);
1008
1009                                tmp_rega = rtl_get_rfreg(hw,
1010                                                  (enum radio_path)RF90_PATH_A,
1011                                                  0x2a, MASKDWORD);
1012
1013                                if (((tmp_rega & BIT(11)) == BIT(11)))
1014                                        break;
1015                        }
1016                        /* check that loop was successful. If not, exit now */
1017                        if (i == 10000) {
1018                                rtlpci->init_ready = false;
1019                                return 1;
1020                        }
1021                }
1022        }
1023        rtlpci->init_ready = true;
1024        return err;
1025}
1026
1027static enum version_8192d _rtl92de_read_chip_version(struct ieee80211_hw *hw)
1028{
1029        struct rtl_priv *rtlpriv = rtl_priv(hw);
1030        enum version_8192d version = VERSION_NORMAL_CHIP_92D_SINGLEPHY;
1031        u32 value32;
1032
1033        value32 = rtl_read_dword(rtlpriv, REG_SYS_CFG);
1034        if (!(value32 & 0x000f0000)) {
1035                version = VERSION_TEST_CHIP_92D_SINGLEPHY;
1036                RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "TEST CHIP!!!\n");
1037        } else {
1038                version = VERSION_NORMAL_CHIP_92D_SINGLEPHY;
1039                RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "Normal CHIP!!!\n");
1040        }
1041        return version;
1042}
1043
1044static int _rtl92de_set_media_status(struct ieee80211_hw *hw,
1045                                     enum nl80211_iftype type)
1046{
1047        struct rtl_priv *rtlpriv = rtl_priv(hw);
1048        u8 bt_msr = rtl_read_byte(rtlpriv, MSR);
1049        enum led_ctl_mode ledaction = LED_CTL_NO_LINK;
1050        u8 bcnfunc_enable;
1051
1052        bt_msr &= 0xfc;
1053
1054        if (type == NL80211_IFTYPE_UNSPECIFIED ||
1055            type == NL80211_IFTYPE_STATION) {
1056                _rtl92de_stop_tx_beacon(hw);
1057                _rtl92de_enable_bcn_sub_func(hw);
1058        } else if (type == NL80211_IFTYPE_ADHOC ||
1059                type == NL80211_IFTYPE_AP) {
1060                _rtl92de_resume_tx_beacon(hw);
1061                _rtl92de_disable_bcn_sub_func(hw);
1062        } else {
1063                RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
1064                         "Set HW_VAR_MEDIA_STATUS: No such media status(%x)\n",
1065                         type);
1066        }
1067        bcnfunc_enable = rtl_read_byte(rtlpriv, REG_BCN_CTRL);
1068        switch (type) {
1069        case NL80211_IFTYPE_UNSPECIFIED:
1070                bt_msr |= MSR_NOLINK;
1071                ledaction = LED_CTL_LINK;
1072                bcnfunc_enable &= 0xF7;
1073                RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
1074                         "Set Network type to NO LINK!\n");
1075                break;
1076        case NL80211_IFTYPE_ADHOC:
1077                bt_msr |= MSR_ADHOC;
1078                bcnfunc_enable |= 0x08;
1079                RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
1080                         "Set Network type to Ad Hoc!\n");
1081                break;
1082        case NL80211_IFTYPE_STATION:
1083                bt_msr |= MSR_INFRA;
1084                ledaction = LED_CTL_LINK;
1085                bcnfunc_enable &= 0xF7;
1086                RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
1087                         "Set Network type to STA!\n");
1088                break;
1089        case NL80211_IFTYPE_AP:
1090                bt_msr |= MSR_AP;
1091                bcnfunc_enable |= 0x08;
1092                RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
1093                         "Set Network type to AP!\n");
1094                break;
1095        default:
1096                pr_err("Network type %d not supported!\n", type);
1097                return 1;
1098        }
1099        rtl_write_byte(rtlpriv, MSR, bt_msr);
1100        rtlpriv->cfg->ops->led_control(hw, ledaction);
1101        if ((bt_msr & MSR_MASK) == MSR_AP)
1102                rtl_write_byte(rtlpriv, REG_BCNTCFG + 1, 0x00);
1103        else
1104                rtl_write_byte(rtlpriv, REG_BCNTCFG + 1, 0x66);
1105        return 0;
1106}
1107
1108void rtl92de_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid)
1109{
1110        struct rtl_priv *rtlpriv = rtl_priv(hw);
1111        u32 reg_rcr;
1112
1113        if (rtlpriv->psc.rfpwr_state != ERFON)
1114                return;
1115
1116        rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RCR, (u8 *)(&reg_rcr));
1117
1118        if (check_bssid) {
1119                reg_rcr |= (RCR_CBSSID_DATA | RCR_CBSSID_BCN);
1120                rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(&reg_rcr));
1121                _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(4));
1122        } else if (!check_bssid) {
1123                reg_rcr &= (~(RCR_CBSSID_DATA | RCR_CBSSID_BCN));
1124                _rtl92de_set_bcn_ctrl_reg(hw, BIT(4), 0);
1125                rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(&reg_rcr));
1126        }
1127}
1128
1129int rtl92de_set_network_type(struct ieee80211_hw *hw, enum nl80211_iftype type)
1130{
1131        struct rtl_priv *rtlpriv = rtl_priv(hw);
1132
1133        if (_rtl92de_set_media_status(hw, type))
1134                return -EOPNOTSUPP;
1135
1136        /* check bssid */
1137        if (rtlpriv->mac80211.link_state == MAC80211_LINKED) {
1138                if (type != NL80211_IFTYPE_AP)
1139                        rtl92de_set_check_bssid(hw, true);
1140        } else {
1141                rtl92de_set_check_bssid(hw, false);
1142        }
1143        return 0;
1144}
1145
1146/* do iqk or reload iqk */
1147/* windows just rtl92d_phy_reload_iqk_setting in set channel,
1148 * but it's very strict for time sequence so we add
1149 * rtl92d_phy_reload_iqk_setting here */
1150void rtl92d_linked_set_reg(struct ieee80211_hw *hw)
1151{
1152        struct rtl_priv *rtlpriv = rtl_priv(hw);
1153        struct rtl_phy *rtlphy = &(rtlpriv->phy);
1154        u8 indexforchannel;
1155        u8 channel = rtlphy->current_channel;
1156
1157        indexforchannel = rtl92d_get_rightchnlplace_for_iqk(channel);
1158        if (!rtlphy->iqk_matrix[indexforchannel].iqk_done) {
1159                RT_TRACE(rtlpriv, COMP_SCAN | COMP_INIT, DBG_DMESG,
1160                         "Do IQK for channel:%d\n", channel);
1161                rtl92d_phy_iq_calibrate(hw);
1162        }
1163}
1164
1165/* don't set REG_EDCA_BE_PARAM here because
1166 * mac80211 will send pkt when scan */
1167void rtl92de_set_qos(struct ieee80211_hw *hw, int aci)
1168{
1169        rtl92d_dm_init_edca_turbo(hw);
1170}
1171
1172void rtl92de_enable_interrupt(struct ieee80211_hw *hw)
1173{
1174        struct rtl_priv *rtlpriv = rtl_priv(hw);
1175        struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
1176
1177        rtl_write_dword(rtlpriv, REG_HIMR, rtlpci->irq_mask[0] & 0xFFFFFFFF);
1178        rtl_write_dword(rtlpriv, REG_HIMRE, rtlpci->irq_mask[1] & 0xFFFFFFFF);
1179}
1180
1181void rtl92de_disable_interrupt(struct ieee80211_hw *hw)
1182{
1183        struct rtl_priv *rtlpriv = rtl_priv(hw);
1184        struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
1185
1186        rtl_write_dword(rtlpriv, REG_HIMR, IMR8190_DISABLED);
1187        rtl_write_dword(rtlpriv, REG_HIMRE, IMR8190_DISABLED);
1188        synchronize_irq(rtlpci->pdev->irq);
1189}
1190
1191static void _rtl92de_poweroff_adapter(struct ieee80211_hw *hw)
1192{
1193        struct rtl_priv *rtlpriv = rtl_priv(hw);
1194        u8 u1b_tmp;
1195        unsigned long flags;
1196
1197        rtlpriv->intf_ops->enable_aspm(hw);
1198        rtl_write_byte(rtlpriv, REG_RF_CTRL, 0x00);
1199        rtl_set_bbreg(hw, RFPGA0_XCD_RFPARAMETER, BIT(3), 0);
1200        rtl_set_bbreg(hw, RFPGA0_XCD_RFPARAMETER, BIT(15), 0);
1201
1202        /* 0x20:value 05-->04 */
1203        rtl_write_byte(rtlpriv, REG_LDOA15_CTRL, 0x04);
1204
1205        /*  ==== Reset digital sequence   ====== */
1206        rtl92d_firmware_selfreset(hw);
1207
1208        /* f.   SYS_FUNC_EN 0x03[7:0]=0x51 reset MCU, MAC register, DCORE */
1209        rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, 0x51);
1210
1211        /* g.   MCUFWDL 0x80[1:0]=0 reset MCU ready status */
1212        rtl_write_byte(rtlpriv, REG_MCUFWDL, 0x00);
1213
1214        /*  ==== Pull GPIO PIN to balance level and LED control ====== */
1215
1216        /* h.     GPIO_PIN_CTRL 0x44[31:0]=0x000  */
1217        rtl_write_dword(rtlpriv, REG_GPIO_PIN_CTRL, 0x00000000);
1218
1219        /* i.    Value = GPIO_PIN_CTRL[7:0] */
1220        u1b_tmp = rtl_read_byte(rtlpriv, REG_GPIO_PIN_CTRL);
1221
1222        /* j.    GPIO_PIN_CTRL 0x44[31:0] = 0x00FF0000 | (value <<8); */
1223        /* write external PIN level  */
1224        rtl_write_dword(rtlpriv, REG_GPIO_PIN_CTRL,
1225                        0x00FF0000 | (u1b_tmp << 8));
1226
1227        /* k.   GPIO_MUXCFG 0x42 [15:0] = 0x0780 */
1228        rtl_write_word(rtlpriv, REG_GPIO_IO_SEL, 0x0790);
1229
1230        /* l.   LEDCFG 0x4C[15:0] = 0x8080 */
1231        rtl_write_word(rtlpriv, REG_LEDCFG0, 0x8080);
1232
1233        /*  ==== Disable analog sequence === */
1234
1235        /* m.   AFE_PLL_CTRL[7:0] = 0x80  disable PLL */
1236        rtl_write_byte(rtlpriv, REG_AFE_PLL_CTRL, 0x80);
1237
1238        /* n.   SPS0_CTRL 0x11[7:0] = 0x22  enter PFM mode */
1239        rtl_write_byte(rtlpriv, REG_SPS0_CTRL, 0x23);
1240
1241        /* o.   AFE_XTAL_CTRL 0x24[7:0] = 0x0E  disable XTAL, if No BT COEX */
1242        rtl_write_byte(rtlpriv, REG_AFE_XTAL_CTRL, 0x0e);
1243
1244        /* p.   RSV_CTRL 0x1C[7:0] = 0x0E lock ISO/CLK/Power control register */
1245        rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0x0e);
1246
1247        /*  ==== interface into suspend === */
1248
1249        /* q.   APS_FSMCO[15:8] = 0x58 PCIe suspend mode */
1250        /* According to power document V11, we need to set this */
1251        /* value as 0x18. Otherwise, we may not L0s sometimes. */
1252        /* This indluences power consumption. Bases on SD1's test, */
1253        /* set as 0x00 do not affect power current. And if it */
1254        /* is set as 0x18, they had ever met auto load fail problem. */
1255        rtl_write_byte(rtlpriv, REG_APS_FSMCO + 1, 0x10);
1256
1257        RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
1258                 "In PowerOff,reg0x%x=%X\n",
1259                 REG_SPS0_CTRL, rtl_read_byte(rtlpriv, REG_SPS0_CTRL));
1260        /* r.   Note: for PCIe interface, PON will not turn */
1261        /* off m-bias and BandGap in PCIe suspend mode.  */
1262
1263        /* 0x17[7] 1b': power off in process  0b' : power off over */
1264        if (rtlpriv->rtlhal.macphymode != SINGLEMAC_SINGLEPHY) {
1265                spin_lock_irqsave(&globalmutex_power, flags);
1266                u1b_tmp = rtl_read_byte(rtlpriv, REG_POWER_OFF_IN_PROCESS);
1267                u1b_tmp &= (~BIT(7));
1268                rtl_write_byte(rtlpriv, REG_POWER_OFF_IN_PROCESS, u1b_tmp);
1269                spin_unlock_irqrestore(&globalmutex_power, flags);
1270        }
1271
1272        RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "<=======\n");
1273}
1274
1275void rtl92de_card_disable(struct ieee80211_hw *hw)
1276{
1277        struct rtl_priv *rtlpriv = rtl_priv(hw);
1278        struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
1279        struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
1280        struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
1281        enum nl80211_iftype opmode;
1282
1283        mac->link_state = MAC80211_NOLINK;
1284        opmode = NL80211_IFTYPE_UNSPECIFIED;
1285        _rtl92de_set_media_status(hw, opmode);
1286
1287        if (rtlpci->driver_is_goingto_unload ||
1288            ppsc->rfoff_reason > RF_CHANGE_BY_PS)
1289                rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_OFF);
1290        RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
1291        /* Power sequence for each MAC. */
1292        /* a. stop tx DMA  */
1293        /* b. close RF */
1294        /* c. clear rx buf */
1295        /* d. stop rx DMA */
1296        /* e.  reset MAC */
1297
1298        /* a. stop tx DMA */
1299        rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 1, 0xFE);
1300        udelay(50);
1301
1302        /* b. TXPAUSE 0x522[7:0] = 0xFF Pause MAC TX queue */
1303
1304        /* c. ========RF OFF sequence==========  */
1305        /* 0x88c[23:20] = 0xf. */
1306        rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER4, 0x00f00000, 0xf);
1307        rtl_set_rfreg(hw, RF90_PATH_A, 0x00, RFREG_OFFSET_MASK, 0x00);
1308
1309        /* APSD_CTRL 0x600[7:0] = 0x40 */
1310        rtl_write_byte(rtlpriv, REG_APSD_CTRL, 0x40);
1311
1312        /* Close antenna 0,0xc04,0xd04 */
1313        rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE, MASKBYTE0, 0);
1314        rtl_set_bbreg(hw, ROFDM1_TRXPATHENABLE, BDWORD, 0);
1315
1316        /*  SYS_FUNC_EN 0x02[7:0] = 0xE2   reset BB state machine */
1317        rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE2);
1318
1319        /* Mac0 can not do Global reset. Mac1 can do. */
1320        /* SYS_FUNC_EN 0x02[7:0] = 0xE0  reset BB state machine  */
1321        if (rtlpriv->rtlhal.interfaceindex == 1)
1322                rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE0);
1323        udelay(50);
1324
1325        /* d.  stop tx/rx dma before disable REG_CR (0x100) to fix */
1326        /* dma hang issue when disable/enable device.  */
1327        rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 1, 0xff);
1328        udelay(50);
1329        rtl_write_byte(rtlpriv, REG_CR, 0x0);
1330        RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "==> Do power off.......\n");
1331        if (rtl92d_phy_check_poweroff(hw))
1332                _rtl92de_poweroff_adapter(hw);
1333        return;
1334}
1335
1336void rtl92de_interrupt_recognized(struct ieee80211_hw *hw,
1337                                  struct rtl_int *intvec)
1338{
1339        struct rtl_priv *rtlpriv = rtl_priv(hw);
1340        struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
1341
1342        intvec->inta = rtl_read_dword(rtlpriv, ISR) & rtlpci->irq_mask[0];
1343        rtl_write_dword(rtlpriv, ISR, intvec->inta);
1344}
1345
1346void rtl92de_set_beacon_related_registers(struct ieee80211_hw *hw)
1347{
1348        struct rtl_priv *rtlpriv = rtl_priv(hw);
1349        struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
1350        u16 bcn_interval, atim_window;
1351
1352        bcn_interval = mac->beacon_interval;
1353        atim_window = 2;
1354        /*rtl92de_disable_interrupt(hw);  */
1355        rtl_write_word(rtlpriv, REG_ATIMWND, atim_window);
1356        rtl_write_word(rtlpriv, REG_BCN_INTERVAL, bcn_interval);
1357        rtl_write_word(rtlpriv, REG_BCNTCFG, 0x660f);
1358        rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_CCK, 0x20);
1359        if (rtlpriv->rtlhal.current_bandtype == BAND_ON_5G)
1360                rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_OFDM, 0x30);
1361        else
1362                rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_OFDM, 0x20);
1363        rtl_write_byte(rtlpriv, 0x606, 0x30);
1364}
1365
1366void rtl92de_set_beacon_interval(struct ieee80211_hw *hw)
1367{
1368        struct rtl_priv *rtlpriv = rtl_priv(hw);
1369        struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
1370        u16 bcn_interval = mac->beacon_interval;
1371
1372        RT_TRACE(rtlpriv, COMP_BEACON, DBG_DMESG,
1373                 "beacon_interval:%d\n", bcn_interval);
1374        /* rtl92de_disable_interrupt(hw); */
1375        rtl_write_word(rtlpriv, REG_BCN_INTERVAL, bcn_interval);
1376        /* rtl92de_enable_interrupt(hw); */
1377}
1378
1379void rtl92de_update_interrupt_mask(struct ieee80211_hw *hw,
1380                                   u32 add_msr, u32 rm_msr)
1381{
1382        struct rtl_priv *rtlpriv = rtl_priv(hw);
1383        struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
1384
1385        RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD, "add_msr:%x, rm_msr:%x\n",
1386                 add_msr, rm_msr);
1387        if (add_msr)
1388                rtlpci->irq_mask[0] |= add_msr;
1389        if (rm_msr)
1390                rtlpci->irq_mask[0] &= (~rm_msr);
1391        rtl92de_disable_interrupt(hw);
1392        rtl92de_enable_interrupt(hw);
1393}
1394
1395static void _rtl92de_readpowervalue_fromprom(struct txpower_info *pwrinfo,
1396                                 u8 *rom_content, bool autoloadfail)
1397{
1398        u32 rfpath, eeaddr, group, offset1, offset2;
1399        u8 i;
1400
1401        memset(pwrinfo, 0, sizeof(struct txpower_info));
1402        if (autoloadfail) {
1403                for (group = 0; group < CHANNEL_GROUP_MAX; group++) {
1404                        for (rfpath = 0; rfpath < RF6052_MAX_PATH; rfpath++) {
1405                                if (group < CHANNEL_GROUP_MAX_2G) {
1406                                        pwrinfo->cck_index[rfpath][group] =
1407                                            EEPROM_DEFAULT_TXPOWERLEVEL_2G;
1408                                        pwrinfo->ht40_1sindex[rfpath][group] =
1409                                            EEPROM_DEFAULT_TXPOWERLEVEL_2G;
1410                                } else {
1411                                        pwrinfo->ht40_1sindex[rfpath][group] =
1412                                            EEPROM_DEFAULT_TXPOWERLEVEL_5G;
1413                                }
1414                                pwrinfo->ht40_2sindexdiff[rfpath][group] =
1415                                    EEPROM_DEFAULT_HT40_2SDIFF;
1416                                pwrinfo->ht20indexdiff[rfpath][group] =
1417                                    EEPROM_DEFAULT_HT20_DIFF;
1418                                pwrinfo->ofdmindexdiff[rfpath][group] =
1419                                    EEPROM_DEFAULT_LEGACYHTTXPOWERDIFF;
1420                                pwrinfo->ht40maxoffset[rfpath][group] =
1421                                    EEPROM_DEFAULT_HT40_PWRMAXOFFSET;
1422                                pwrinfo->ht20maxoffset[rfpath][group] =
1423                                    EEPROM_DEFAULT_HT20_PWRMAXOFFSET;
1424                        }
1425                }
1426                for (i = 0; i < 3; i++) {
1427                        pwrinfo->tssi_a[i] = EEPROM_DEFAULT_TSSI;
1428                        pwrinfo->tssi_b[i] = EEPROM_DEFAULT_TSSI;
1429                }
1430                return;
1431        }
1432
1433        /* Maybe autoload OK,buf the tx power index value is not filled.
1434         * If we find it, we set it to default value. */
1435        for (rfpath = 0; rfpath < RF6052_MAX_PATH; rfpath++) {
1436                for (group = 0; group < CHANNEL_GROUP_MAX_2G; group++) {
1437                        eeaddr = EEPROM_CCK_TX_PWR_INX_2G + (rfpath * 3)
1438                                 + group;
1439                        pwrinfo->cck_index[rfpath][group] =
1440                                        (rom_content[eeaddr] == 0xFF) ?
1441                                             (eeaddr > 0x7B ?
1442                                             EEPROM_DEFAULT_TXPOWERLEVEL_5G :
1443                                             EEPROM_DEFAULT_TXPOWERLEVEL_2G) :
1444                                             rom_content[eeaddr];
1445                }
1446        }
1447        for (rfpath = 0; rfpath < RF6052_MAX_PATH; rfpath++) {
1448                for (group = 0; group < CHANNEL_GROUP_MAX; group++) {
1449                        offset1 = group / 3;
1450                        offset2 = group % 3;
1451                        eeaddr = EEPROM_HT40_1S_TX_PWR_INX_2G + (rfpath * 3) +
1452                            offset2 + offset1 * 21;
1453                        pwrinfo->ht40_1sindex[rfpath][group] =
1454                            (rom_content[eeaddr] == 0xFF) ? (eeaddr > 0x7B ?
1455                                             EEPROM_DEFAULT_TXPOWERLEVEL_5G :
1456                                             EEPROM_DEFAULT_TXPOWERLEVEL_2G) :
1457                                                 rom_content[eeaddr];
1458                }
1459        }
1460        /* These just for 92D efuse offset. */
1461        for (group = 0; group < CHANNEL_GROUP_MAX; group++) {
1462                for (rfpath = 0; rfpath < RF6052_MAX_PATH; rfpath++) {
1463                        int base1 = EEPROM_HT40_2S_TX_PWR_INX_DIFF_2G;
1464
1465                        offset1 = group / 3;
1466                        offset2 = group % 3;
1467
1468                        if (rom_content[base1 + offset2 + offset1 * 21] != 0xFF)
1469                                pwrinfo->ht40_2sindexdiff[rfpath][group] =
1470                                    (rom_content[base1 +
1471                                     offset2 + offset1 * 21] >> (rfpath * 4))
1472                                     & 0xF;
1473                        else
1474                                pwrinfo->ht40_2sindexdiff[rfpath][group] =
1475                                    EEPROM_DEFAULT_HT40_2SDIFF;
1476                        if (rom_content[EEPROM_HT20_TX_PWR_INX_DIFF_2G + offset2
1477                            + offset1 * 21] != 0xFF)
1478                                pwrinfo->ht20indexdiff[rfpath][group] =
1479                                    (rom_content[EEPROM_HT20_TX_PWR_INX_DIFF_2G
1480                                    + offset2 + offset1 * 21] >> (rfpath * 4))
1481                                    & 0xF;
1482                        else
1483                                pwrinfo->ht20indexdiff[rfpath][group] =
1484                                    EEPROM_DEFAULT_HT20_DIFF;
1485                        if (rom_content[EEPROM_OFDM_TX_PWR_INX_DIFF_2G + offset2
1486                            + offset1 * 21] != 0xFF)
1487                                pwrinfo->ofdmindexdiff[rfpath][group] =
1488                                    (rom_content[EEPROM_OFDM_TX_PWR_INX_DIFF_2G
1489                                     + offset2 + offset1 * 21] >> (rfpath * 4))
1490                                     & 0xF;
1491                        else
1492                                pwrinfo->ofdmindexdiff[rfpath][group] =
1493                                    EEPROM_DEFAULT_LEGACYHTTXPOWERDIFF;
1494                        if (rom_content[EEPROM_HT40_MAX_PWR_OFFSET_2G + offset2
1495                            + offset1 * 21] != 0xFF)
1496                                pwrinfo->ht40maxoffset[rfpath][group] =
1497                                    (rom_content[EEPROM_HT40_MAX_PWR_OFFSET_2G
1498                                    + offset2 + offset1 * 21] >> (rfpath * 4))
1499                                    & 0xF;
1500                        else
1501                                pwrinfo->ht40maxoffset[rfpath][group] =
1502                                    EEPROM_DEFAULT_HT40_PWRMAXOFFSET;
1503                        if (rom_content[EEPROM_HT20_MAX_PWR_OFFSET_2G + offset2
1504                            + offset1 * 21] != 0xFF)
1505                                pwrinfo->ht20maxoffset[rfpath][group] =
1506                                    (rom_content[EEPROM_HT20_MAX_PWR_OFFSET_2G +
1507                                     offset2 + offset1 * 21] >> (rfpath * 4)) &
1508                                     0xF;
1509                        else
1510                                pwrinfo->ht20maxoffset[rfpath][group] =
1511                                    EEPROM_DEFAULT_HT20_PWRMAXOFFSET;
1512                }
1513        }
1514        if (rom_content[EEPROM_TSSI_A_5G] != 0xFF) {
1515                /* 5GL */
1516                pwrinfo->tssi_a[0] = rom_content[EEPROM_TSSI_A_5G] & 0x3F;
1517                pwrinfo->tssi_b[0] = rom_content[EEPROM_TSSI_B_5G] & 0x3F;
1518                /* 5GM */
1519                pwrinfo->tssi_a[1] = rom_content[EEPROM_TSSI_AB_5G] & 0x3F;
1520                pwrinfo->tssi_b[1] =
1521                    (rom_content[EEPROM_TSSI_AB_5G] & 0xC0) >> 6 |
1522                    (rom_content[EEPROM_TSSI_AB_5G + 1] & 0x0F) << 2;
1523                /* 5GH */
1524                pwrinfo->tssi_a[2] = (rom_content[EEPROM_TSSI_AB_5G + 1] &
1525                                      0xF0) >> 4 |
1526                    (rom_content[EEPROM_TSSI_AB_5G + 2] & 0x03) << 4;
1527                pwrinfo->tssi_b[2] = (rom_content[EEPROM_TSSI_AB_5G + 2] &
1528                                      0xFC) >> 2;
1529        } else {
1530                for (i = 0; i < 3; i++) {
1531                        pwrinfo->tssi_a[i] = EEPROM_DEFAULT_TSSI;
1532                        pwrinfo->tssi_b[i] = EEPROM_DEFAULT_TSSI;
1533                }
1534        }
1535}
1536
1537static void _rtl92de_read_txpower_info(struct ieee80211_hw *hw,
1538                                       bool autoload_fail, u8 *hwinfo)
1539{
1540        struct rtl_priv *rtlpriv = rtl_priv(hw);
1541        struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
1542        struct txpower_info pwrinfo;
1543        u8 tempval[2], i, pwr, diff;
1544        u32 ch, rfpath, group;
1545
1546        _rtl92de_readpowervalue_fromprom(&pwrinfo, hwinfo, autoload_fail);
1547        if (!autoload_fail) {
1548                /* bit0~2 */
1549                rtlefuse->eeprom_regulatory = (hwinfo[EEPROM_RF_OPT1] & 0x7);
1550                rtlefuse->eeprom_thermalmeter =
1551                         hwinfo[EEPROM_THERMAL_METER] & 0x1f;
1552                rtlefuse->crystalcap = hwinfo[EEPROM_XTAL_K];
1553                tempval[0] = hwinfo[EEPROM_IQK_DELTA] & 0x03;
1554                tempval[1] = (hwinfo[EEPROM_LCK_DELTA] & 0x0C) >> 2;
1555                rtlefuse->txpwr_fromeprom = true;
1556                if (IS_92D_D_CUT(rtlpriv->rtlhal.version) ||
1557                    IS_92D_E_CUT(rtlpriv->rtlhal.version)) {
1558                        rtlefuse->internal_pa_5g[0] =
1559                                !((hwinfo[EEPROM_TSSI_A_5G] & BIT(6)) >> 6);
1560                        rtlefuse->internal_pa_5g[1] =
1561                                !((hwinfo[EEPROM_TSSI_B_5G] & BIT(6)) >> 6);
1562                        RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
1563                                 "Is D cut,Internal PA0 %d Internal PA1 %d\n",
1564                                 rtlefuse->internal_pa_5g[0],
1565                                 rtlefuse->internal_pa_5g[1]);
1566                }
1567                rtlefuse->eeprom_c9 = hwinfo[EEPROM_RF_OPT6];
1568                rtlefuse->eeprom_cc = hwinfo[EEPROM_RF_OPT7];
1569        } else {
1570                rtlefuse->eeprom_regulatory = 0;
1571                rtlefuse->eeprom_thermalmeter = EEPROM_DEFAULT_THERMALMETER;
1572                rtlefuse->crystalcap = EEPROM_DEFAULT_CRYSTALCAP;
1573                tempval[0] = tempval[1] = 3;
1574        }
1575
1576        /* Use default value to fill parameters if
1577         * efuse is not filled on some place. */
1578
1579        /* ThermalMeter from EEPROM */
1580        if (rtlefuse->eeprom_thermalmeter < 0x06 ||
1581            rtlefuse->eeprom_thermalmeter > 0x1c)
1582                rtlefuse->eeprom_thermalmeter = 0x12;
1583        rtlefuse->thermalmeter[0] = rtlefuse->eeprom_thermalmeter;
1584
1585        /* check XTAL_K */
1586        if (rtlefuse->crystalcap == 0xFF)
1587                rtlefuse->crystalcap = 0;
1588        if (rtlefuse->eeprom_regulatory > 3)
1589                rtlefuse->eeprom_regulatory = 0;
1590
1591        for (i = 0; i < 2; i++) {
1592                switch (tempval[i]) {
1593                case 0:
1594                        tempval[i] = 5;
1595                        break;
1596                case 1:
1597                        tempval[i] = 4;
1598                        break;
1599                case 2:
1600                        tempval[i] = 3;
1601                        break;
1602                case 3:
1603                default:
1604                        tempval[i] = 0;
1605                        break;
1606                }
1607        }
1608
1609        rtlefuse->delta_iqk = tempval[0];
1610        if (tempval[1] > 0)
1611                rtlefuse->delta_lck = tempval[1] - 1;
1612        if (rtlefuse->eeprom_c9 == 0xFF)
1613                rtlefuse->eeprom_c9 = 0x00;
1614        RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD,
1615                 "EEPROMRegulatory = 0x%x\n", rtlefuse->eeprom_regulatory);
1616        RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD,
1617                 "ThermalMeter = 0x%x\n", rtlefuse->eeprom_thermalmeter);
1618        RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD,
1619                 "CrystalCap = 0x%x\n", rtlefuse->crystalcap);
1620        RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD,
1621                 "Delta_IQK = 0x%x Delta_LCK = 0x%x\n",
1622                 rtlefuse->delta_iqk, rtlefuse->delta_lck);
1623
1624        for (rfpath = 0; rfpath < RF6052_MAX_PATH; rfpath++) {
1625                for (ch = 0; ch < CHANNEL_MAX_NUMBER; ch++) {
1626                        group = rtl92d_get_chnlgroup_fromarray((u8) ch);
1627                        if (ch < CHANNEL_MAX_NUMBER_2G)
1628                                rtlefuse->txpwrlevel_cck[rfpath][ch] =
1629                                    pwrinfo.cck_index[rfpath][group];
1630                        rtlefuse->txpwrlevel_ht40_1s[rfpath][ch] =
1631                                    pwrinfo.ht40_1sindex[rfpath][group];
1632                        rtlefuse->txpwr_ht20diff[rfpath][ch] =
1633                                    pwrinfo.ht20indexdiff[rfpath][group];
1634                        rtlefuse->txpwr_legacyhtdiff[rfpath][ch] =
1635                                    pwrinfo.ofdmindexdiff[rfpath][group];
1636                        rtlefuse->pwrgroup_ht20[rfpath][ch] =
1637                                    pwrinfo.ht20maxoffset[rfpath][group];
1638                        rtlefuse->pwrgroup_ht40[rfpath][ch] =
1639                                    pwrinfo.ht40maxoffset[rfpath][group];
1640                        pwr = pwrinfo.ht40_1sindex[rfpath][group];
1641                        diff = pwrinfo.ht40_2sindexdiff[rfpath][group];
1642                        rtlefuse->txpwrlevel_ht40_2s[rfpath][ch] =
1643                                    (pwr > diff) ? (pwr - diff) : 0;
1644                }
1645        }
1646}
1647
1648static void _rtl92de_read_macphymode_from_prom(struct ieee80211_hw *hw,
1649                                               u8 *content)
1650{
1651        struct rtl_priv *rtlpriv = rtl_priv(hw);
1652        struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
1653        u8 macphy_crvalue = content[EEPROM_MAC_FUNCTION];
1654
1655        if (macphy_crvalue & BIT(3)) {
1656                rtlhal->macphymode = SINGLEMAC_SINGLEPHY;
1657                RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
1658                         "MacPhyMode SINGLEMAC_SINGLEPHY\n");
1659        } else {
1660                rtlhal->macphymode = DUALMAC_DUALPHY;
1661                RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
1662                         "MacPhyMode DUALMAC_DUALPHY\n");
1663        }
1664}
1665
1666static void _rtl92de_read_macphymode_and_bandtype(struct ieee80211_hw *hw,
1667                                                  u8 *content)
1668{
1669        _rtl92de_read_macphymode_from_prom(hw, content);
1670        rtl92d_phy_config_macphymode(hw);
1671        rtl92d_phy_config_macphymode_info(hw);
1672}
1673
1674static void _rtl92de_efuse_update_chip_version(struct ieee80211_hw *hw)
1675{
1676        struct rtl_priv *rtlpriv = rtl_priv(hw);
1677        enum version_8192d chipver = rtlpriv->rtlhal.version;
1678        u8 cutvalue[2];
1679        u16 chipvalue;
1680
1681        rtlpriv->intf_ops->read_efuse_byte(hw, EEPROME_CHIP_VERSION_H,
1682                                           &cutvalue[1]);
1683        rtlpriv->intf_ops->read_efuse_byte(hw, EEPROME_CHIP_VERSION_L,
1684                                           &cutvalue[0]);
1685        chipvalue = (cutvalue[1] << 8) | cutvalue[0];
1686        switch (chipvalue) {
1687        case 0xAA55:
1688                chipver |= CHIP_92D_C_CUT;
1689                RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "C-CUT!!!\n");
1690                break;
1691        case 0x9966:
1692                chipver |= CHIP_92D_D_CUT;
1693                RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "D-CUT!!!\n");
1694                break;
1695        case 0xCC33:
1696                chipver |= CHIP_92D_E_CUT;
1697                RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "E-CUT!!!\n");
1698                break;
1699        default:
1700                chipver |= CHIP_92D_D_CUT;
1701                pr_err("Unknown CUT!\n");
1702                break;
1703        }
1704        rtlpriv->rtlhal.version = chipver;
1705}
1706
1707static void _rtl92de_read_adapter_info(struct ieee80211_hw *hw)
1708{
1709        struct rtl_priv *rtlpriv = rtl_priv(hw);
1710        struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
1711        struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
1712        int params[] = {RTL8190_EEPROM_ID, EEPROM_VID, EEPROM_DID,
1713                        EEPROM_SVID, EEPROM_SMID, EEPROM_MAC_ADDR_MAC0_92D,
1714                        EEPROM_CHANNEL_PLAN, EEPROM_VERSION, EEPROM_CUSTOMER_ID,
1715                        COUNTRY_CODE_WORLD_WIDE_13};
1716        int i;
1717        u16 usvalue;
1718        u8 *hwinfo;
1719
1720        hwinfo = kzalloc(HWSET_MAX_SIZE, GFP_KERNEL);
1721        if (!hwinfo)
1722                return;
1723
1724        if (rtl_get_hwinfo(hw, rtlpriv, HWSET_MAX_SIZE, hwinfo, params))
1725                goto exit;
1726
1727        _rtl92de_efuse_update_chip_version(hw);
1728        _rtl92de_read_macphymode_and_bandtype(hw, hwinfo);
1729
1730        /* Read Permanent MAC address for 2nd interface */
1731        if (rtlhal->interfaceindex != 0) {
1732                for (i = 0; i < 6; i += 2) {
1733                        usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR_MAC1_92D + i];
1734                        *((u16 *) (&rtlefuse->dev_addr[i])) = usvalue;
1735                }
1736        }
1737        rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ETHER_ADDR,
1738                                      rtlefuse->dev_addr);
1739        RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "%pM\n", rtlefuse->dev_addr);
1740        _rtl92de_read_txpower_info(hw, rtlefuse->autoload_failflag, hwinfo);
1741
1742        /* Read Channel Plan */
1743        switch (rtlhal->bandset) {
1744        case BAND_ON_2_4G:
1745                rtlefuse->channel_plan = COUNTRY_CODE_TELEC;
1746                break;
1747        case BAND_ON_5G:
1748                rtlefuse->channel_plan = COUNTRY_CODE_FCC;
1749                break;
1750        case BAND_ON_BOTH:
1751                rtlefuse->channel_plan = COUNTRY_CODE_FCC;
1752                break;
1753        default:
1754                rtlefuse->channel_plan = COUNTRY_CODE_FCC;
1755                break;
1756        }
1757        rtlefuse->txpwr_fromeprom = true;
1758exit:
1759        kfree(hwinfo);
1760}
1761
1762void rtl92de_read_eeprom_info(struct ieee80211_hw *hw)
1763{
1764        struct rtl_priv *rtlpriv = rtl_priv(hw);
1765        struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
1766        struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
1767        u8 tmp_u1b;
1768
1769        rtlhal->version = _rtl92de_read_chip_version(hw);
1770        tmp_u1b = rtl_read_byte(rtlpriv, REG_9346CR);
1771        rtlefuse->autoload_status = tmp_u1b;
1772        if (tmp_u1b & BIT(4)) {
1773                RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "Boot from EEPROM\n");
1774                rtlefuse->epromtype = EEPROM_93C46;
1775        } else {
1776                RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "Boot from EFUSE\n");
1777                rtlefuse->epromtype = EEPROM_BOOT_EFUSE;
1778        }
1779        if (tmp_u1b & BIT(5)) {
1780                RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "Autoload OK\n");
1781
1782                rtlefuse->autoload_failflag = false;
1783                _rtl92de_read_adapter_info(hw);
1784        } else {
1785                pr_err("Autoload ERR!!\n");
1786        }
1787        return;
1788}
1789
1790static void rtl92de_update_hal_rate_table(struct ieee80211_hw *hw,
1791                                          struct ieee80211_sta *sta)
1792{
1793        struct rtl_priv *rtlpriv = rtl_priv(hw);
1794        struct rtl_phy *rtlphy = &(rtlpriv->phy);
1795        struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
1796        struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
1797        u32 ratr_value;
1798        u8 ratr_index = 0;
1799        u8 nmode = mac->ht_enable;
1800        u8 mimo_ps = IEEE80211_SMPS_OFF;
1801        u16 shortgi_rate;
1802        u32 tmp_ratr_value;
1803        u8 curtxbw_40mhz = mac->bw_40;
1804        u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
1805                                                        1 : 0;
1806        u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ?
1807                                                        1 : 0;
1808        enum wireless_mode wirelessmode = mac->mode;
1809
1810        if (rtlhal->current_bandtype == BAND_ON_5G)
1811                ratr_value = sta->supp_rates[1] << 4;
1812        else
1813                ratr_value = sta->supp_rates[0];
1814        ratr_value |= (sta->ht_cap.mcs.rx_mask[1] << 20 |
1815                       sta->ht_cap.mcs.rx_mask[0] << 12);
1816        switch (wirelessmode) {
1817        case WIRELESS_MODE_A:
1818                ratr_value &= 0x00000FF0;
1819                break;
1820        case WIRELESS_MODE_B:
1821                if (ratr_value & 0x0000000c)
1822                        ratr_value &= 0x0000000d;
1823                else
1824                        ratr_value &= 0x0000000f;
1825                break;
1826        case WIRELESS_MODE_G:
1827                ratr_value &= 0x00000FF5;
1828                break;
1829        case WIRELESS_MODE_N_24G:
1830        case WIRELESS_MODE_N_5G:
1831                nmode = 1;
1832                if (mimo_ps == IEEE80211_SMPS_STATIC) {
1833                        ratr_value &= 0x0007F005;
1834                } else {
1835                        u32 ratr_mask;
1836
1837                        if (get_rf_type(rtlphy) == RF_1T2R ||
1838                            get_rf_type(rtlphy) == RF_1T1R) {
1839                                ratr_mask = 0x000ff005;
1840                        } else {
1841                                ratr_mask = 0x0f0ff005;
1842                        }
1843
1844                        ratr_value &= ratr_mask;
1845                }
1846                break;
1847        default:
1848                if (rtlphy->rf_type == RF_1T2R)
1849                        ratr_value &= 0x000ff0ff;
1850                else
1851                        ratr_value &= 0x0f0ff0ff;
1852
1853                break;
1854        }
1855        ratr_value &= 0x0FFFFFFF;
1856        if (nmode && ((curtxbw_40mhz && curshortgi_40mhz) ||
1857            (!curtxbw_40mhz && curshortgi_20mhz))) {
1858                ratr_value |= 0x10000000;
1859                tmp_ratr_value = (ratr_value >> 12);
1860                for (shortgi_rate = 15; shortgi_rate > 0; shortgi_rate--) {
1861                        if ((1 << shortgi_rate) & tmp_ratr_value)
1862                                break;
1863                }
1864                shortgi_rate = (shortgi_rate << 12) | (shortgi_rate << 8) |
1865                    (shortgi_rate << 4) | (shortgi_rate);
1866        }
1867        rtl_write_dword(rtlpriv, REG_ARFR0 + ratr_index * 4, ratr_value);
1868        RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, "%x\n",
1869                 rtl_read_dword(rtlpriv, REG_ARFR0));
1870}
1871
1872static void rtl92de_update_hal_rate_mask(struct ieee80211_hw *hw,
1873                struct ieee80211_sta *sta, u8 rssi_level, bool update_bw)
1874{
1875        struct rtl_priv *rtlpriv = rtl_priv(hw);
1876        struct rtl_phy *rtlphy = &(rtlpriv->phy);
1877        struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
1878        struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
1879        struct rtl_sta_info *sta_entry = NULL;
1880        u32 ratr_bitmap;
1881        u8 ratr_index;
1882        u8 curtxbw_40mhz = (sta->bandwidth >= IEEE80211_STA_RX_BW_40) ? 1 : 0;
1883        u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
1884                                                        1 : 0;
1885        u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ?
1886                                                        1 : 0;
1887        enum wireless_mode wirelessmode = 0;
1888        bool shortgi = false;
1889        u32 value[2];
1890        u8 macid = 0;
1891        u8 mimo_ps = IEEE80211_SMPS_OFF;
1892
1893        sta_entry = (struct rtl_sta_info *) sta->drv_priv;
1894        mimo_ps = sta_entry->mimo_ps;
1895        wirelessmode = sta_entry->wireless_mode;
1896        if (mac->opmode == NL80211_IFTYPE_STATION)
1897                curtxbw_40mhz = mac->bw_40;
1898        else if (mac->opmode == NL80211_IFTYPE_AP ||
1899                mac->opmode == NL80211_IFTYPE_ADHOC)
1900                macid = sta->aid + 1;
1901
1902        if (rtlhal->current_bandtype == BAND_ON_5G)
1903                ratr_bitmap = sta->supp_rates[1] << 4;
1904        else
1905                ratr_bitmap = sta->supp_rates[0];
1906        ratr_bitmap |= (sta->ht_cap.mcs.rx_mask[1] << 20 |
1907                        sta->ht_cap.mcs.rx_mask[0] << 12);
1908        switch (wirelessmode) {
1909        case WIRELESS_MODE_B:
1910                ratr_index = RATR_INX_WIRELESS_B;
1911                if (ratr_bitmap & 0x0000000c)
1912                        ratr_bitmap &= 0x0000000d;
1913                else
1914                        ratr_bitmap &= 0x0000000f;
1915                break;
1916        case WIRELESS_MODE_G:
1917                ratr_index = RATR_INX_WIRELESS_GB;
1918
1919                if (rssi_level == 1)
1920                        ratr_bitmap &= 0x00000f00;
1921                else if (rssi_level == 2)
1922                        ratr_bitmap &= 0x00000ff0;
1923                else
1924                        ratr_bitmap &= 0x00000ff5;
1925                break;
1926        case WIRELESS_MODE_A:
1927                ratr_index = RATR_INX_WIRELESS_G;
1928                ratr_bitmap &= 0x00000ff0;
1929                break;
1930        case WIRELESS_MODE_N_24G:
1931        case WIRELESS_MODE_N_5G:
1932                if (wirelessmode == WIRELESS_MODE_N_24G)
1933                        ratr_index = RATR_INX_WIRELESS_NGB;
1934                else
1935                        ratr_index = RATR_INX_WIRELESS_NG;
1936                if (mimo_ps == IEEE80211_SMPS_STATIC) {
1937                        if (rssi_level == 1)
1938                                ratr_bitmap &= 0x00070000;
1939                        else if (rssi_level == 2)
1940                                ratr_bitmap &= 0x0007f000;
1941                        else
1942                                ratr_bitmap &= 0x0007f005;
1943                } else {
1944                        if (rtlphy->rf_type == RF_1T2R ||
1945                            rtlphy->rf_type == RF_1T1R) {
1946                                if (curtxbw_40mhz) {
1947                                        if (rssi_level == 1)
1948                                                ratr_bitmap &= 0x000f0000;
1949                                        else if (rssi_level == 2)
1950                                                ratr_bitmap &= 0x000ff000;
1951                                        else
1952                                                ratr_bitmap &= 0x000ff015;
1953                                } else {
1954                                        if (rssi_level == 1)
1955                                                ratr_bitmap &= 0x000f0000;
1956                                        else if (rssi_level == 2)
1957                                                ratr_bitmap &= 0x000ff000;
1958                                        else
1959                                                ratr_bitmap &= 0x000ff005;
1960                                }
1961                        } else {
1962                                if (curtxbw_40mhz) {
1963                                        if (rssi_level == 1)
1964                                                ratr_bitmap &= 0x0f0f0000;
1965                                        else if (rssi_level == 2)
1966                                                ratr_bitmap &= 0x0f0ff000;
1967                                        else
1968                                                ratr_bitmap &= 0x0f0ff015;
1969                                } else {
1970                                        if (rssi_level == 1)
1971                                                ratr_bitmap &= 0x0f0f0000;
1972                                        else if (rssi_level == 2)
1973                                                ratr_bitmap &= 0x0f0ff000;
1974                                        else
1975                                                ratr_bitmap &= 0x0f0ff005;
1976                                }
1977                        }
1978                }
1979                if ((curtxbw_40mhz && curshortgi_40mhz) ||
1980                    (!curtxbw_40mhz && curshortgi_20mhz)) {
1981
1982                        if (macid == 0)
1983                                shortgi = true;
1984                        else if (macid == 1)
1985                                shortgi = false;
1986                }
1987                break;
1988        default:
1989                ratr_index = RATR_INX_WIRELESS_NGB;
1990
1991                if (rtlphy->rf_type == RF_1T2R)
1992                        ratr_bitmap &= 0x000ff0ff;
1993                else
1994                        ratr_bitmap &= 0x0f0ff0ff;
1995                break;
1996        }
1997
1998        value[0] = (ratr_bitmap & 0x0fffffff) | (ratr_index << 28);
1999        value[1] = macid | (shortgi ? 0x20 : 0x00) | 0x80;
2000        RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG,
2001                 "ratr_bitmap :%x value0:%x value1:%x\n",
2002                 ratr_bitmap, value[0], value[1]);
2003        rtl92d_fill_h2c_cmd(hw, H2C_RA_MASK, 5, (u8 *) value);
2004        if (macid != 0)
2005                sta_entry->ratr_index = ratr_index;
2006}
2007
2008void rtl92de_update_hal_rate_tbl(struct ieee80211_hw *hw,
2009                struct ieee80211_sta *sta, u8 rssi_level, bool update_bw)
2010{
2011        struct rtl_priv *rtlpriv = rtl_priv(hw);
2012
2013        if (rtlpriv->dm.useramask)
2014                rtl92de_update_hal_rate_mask(hw, sta, rssi_level, update_bw);
2015        else
2016                rtl92de_update_hal_rate_table(hw, sta);
2017}
2018
2019void rtl92de_update_channel_access_setting(struct ieee80211_hw *hw)
2020{
2021        struct rtl_priv *rtlpriv = rtl_priv(hw);
2022        struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
2023        u16 sifs_timer;
2024
2025        rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SLOT_TIME,
2026                                      &mac->slot_time);
2027        if (!mac->ht_enable)
2028                sifs_timer = 0x0a0a;
2029        else
2030                sifs_timer = 0x1010;
2031        rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SIFS, (u8 *)&sifs_timer);
2032}
2033
2034bool rtl92de_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid)
2035{
2036        struct rtl_priv *rtlpriv = rtl_priv(hw);
2037        struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
2038        struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
2039        enum rf_pwrstate e_rfpowerstate_toset;
2040        u8 u1tmp;
2041        bool actuallyset = false;
2042        unsigned long flag;
2043
2044        if (rtlpci->being_init_adapter)
2045                return false;
2046        if (ppsc->swrf_processing)
2047                return false;
2048        spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
2049        if (ppsc->rfchange_inprogress) {
2050                spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
2051                return false;
2052        } else {
2053                ppsc->rfchange_inprogress = true;
2054                spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
2055        }
2056        rtl_write_byte(rtlpriv, REG_MAC_PINMUX_CFG, rtl_read_byte(rtlpriv,
2057                          REG_MAC_PINMUX_CFG) & ~(BIT(3)));
2058        u1tmp = rtl_read_byte(rtlpriv, REG_GPIO_IO_SEL);
2059        e_rfpowerstate_toset = (u1tmp & BIT(3)) ? ERFON : ERFOFF;
2060        if (ppsc->hwradiooff && (e_rfpowerstate_toset == ERFON)) {
2061                RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
2062                         "GPIOChangeRF  - HW Radio ON, RF ON\n");
2063                e_rfpowerstate_toset = ERFON;
2064                ppsc->hwradiooff = false;
2065                actuallyset = true;
2066        } else if (!ppsc->hwradiooff && (e_rfpowerstate_toset == ERFOFF)) {
2067                RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
2068                         "GPIOChangeRF  - HW Radio OFF, RF OFF\n");
2069                e_rfpowerstate_toset = ERFOFF;
2070                ppsc->hwradiooff = true;
2071                actuallyset = true;
2072        }
2073        if (actuallyset) {
2074                spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
2075                ppsc->rfchange_inprogress = false;
2076                spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
2077        } else {
2078                if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_HALT_NIC)
2079                        RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
2080                spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
2081                ppsc->rfchange_inprogress = false;
2082                spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
2083        }
2084        *valid = 1;
2085        return !ppsc->hwradiooff;
2086}
2087
2088void rtl92de_set_key(struct ieee80211_hw *hw, u32 key_index,
2089                     u8 *p_macaddr, bool is_group, u8 enc_algo,
2090                     bool is_wepkey, bool clear_all)
2091{
2092        struct rtl_priv *rtlpriv = rtl_priv(hw);
2093        struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
2094        struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
2095        u8 *macaddr = p_macaddr;
2096        u32 entry_id;
2097        bool is_pairwise = false;
2098        static u8 cam_const_addr[4][6] = {
2099                {0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
2100                {0x00, 0x00, 0x00, 0x00, 0x00, 0x01},
2101                {0x00, 0x00, 0x00, 0x00, 0x00, 0x02},
2102                {0x00, 0x00, 0x00, 0x00, 0x00, 0x03}
2103        };
2104        static u8 cam_const_broad[] = {
2105                0xff, 0xff, 0xff, 0xff, 0xff, 0xff
2106        };
2107
2108        if (clear_all) {
2109                u8 idx;
2110                u8 cam_offset = 0;
2111                u8 clear_number = 5;
2112                RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "clear_all\n");
2113                for (idx = 0; idx < clear_number; idx++) {
2114                        rtl_cam_mark_invalid(hw, cam_offset + idx);
2115                        rtl_cam_empty_entry(hw, cam_offset + idx);
2116
2117                        if (idx < 5) {
2118                                memset(rtlpriv->sec.key_buf[idx], 0,
2119                                       MAX_KEY_LEN);
2120                                rtlpriv->sec.key_len[idx] = 0;
2121                        }
2122                }
2123        } else {
2124                switch (enc_algo) {
2125                case WEP40_ENCRYPTION:
2126                        enc_algo = CAM_WEP40;
2127                        break;
2128                case WEP104_ENCRYPTION:
2129                        enc_algo = CAM_WEP104;
2130                        break;
2131                case TKIP_ENCRYPTION:
2132                        enc_algo = CAM_TKIP;
2133                        break;
2134                case AESCCMP_ENCRYPTION:
2135                        enc_algo = CAM_AES;
2136                        break;
2137                default:
2138                        pr_err("switch case %#x not processed\n",
2139                               enc_algo);
2140                        enc_algo = CAM_TKIP;
2141                        break;
2142                }
2143                if (is_wepkey || rtlpriv->sec.use_defaultkey) {
2144                        macaddr = cam_const_addr[key_index];
2145                        entry_id = key_index;
2146                } else {
2147                        if (is_group) {
2148                                macaddr = cam_const_broad;
2149                                entry_id = key_index;
2150                        } else {
2151                                if (mac->opmode == NL80211_IFTYPE_AP) {
2152                                        entry_id = rtl_cam_get_free_entry(hw,
2153                                                                 p_macaddr);
2154                                        if (entry_id >=  TOTAL_CAM_ENTRY) {
2155                                                pr_err("Can not find free hw security cam entry\n");
2156                                                return;
2157                                        }
2158                                } else {
2159                                        entry_id = CAM_PAIRWISE_KEY_POSITION;
2160                                }
2161                                key_index = PAIRWISE_KEYIDX;
2162                                is_pairwise = true;
2163                        }
2164                }
2165                if (rtlpriv->sec.key_len[key_index] == 0) {
2166                        RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
2167                                 "delete one entry, entry_id is %d\n",
2168                                 entry_id);
2169                        if (mac->opmode == NL80211_IFTYPE_AP)
2170                                rtl_cam_del_entry(hw, p_macaddr);
2171                        rtl_cam_delete_one_entry(hw, p_macaddr, entry_id);
2172                } else {
2173                        RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
2174                                 "The insert KEY length is %d\n",
2175                                 rtlpriv->sec.key_len[PAIRWISE_KEYIDX]);
2176                        RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
2177                                 "The insert KEY is %x %x\n",
2178                                 rtlpriv->sec.key_buf[0][0],
2179                                 rtlpriv->sec.key_buf[0][1]);
2180                        RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
2181                                 "add one entry\n");
2182                        if (is_pairwise) {
2183                                RT_PRINT_DATA(rtlpriv, COMP_SEC, DBG_LOUD,
2184                                              "Pairwise Key content",
2185                                              rtlpriv->sec.pairwise_key,
2186                                              rtlpriv->
2187                                              sec.key_len[PAIRWISE_KEYIDX]);
2188                                RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
2189                                         "set Pairwise key\n");
2190                                rtl_cam_add_one_entry(hw, macaddr, key_index,
2191                                                      entry_id, enc_algo,
2192                                                      CAM_CONFIG_NO_USEDK,
2193                                                      rtlpriv->
2194                                                      sec.key_buf[key_index]);
2195                        } else {
2196                                RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
2197                                         "set group key\n");
2198                                if (mac->opmode == NL80211_IFTYPE_ADHOC) {
2199                                        rtl_cam_add_one_entry(hw,
2200                                                rtlefuse->dev_addr,
2201                                                PAIRWISE_KEYIDX,
2202                                                CAM_PAIRWISE_KEY_POSITION,
2203                                                enc_algo, CAM_CONFIG_NO_USEDK,
2204                                                rtlpriv->sec.key_buf[entry_id]);
2205                                }
2206                                rtl_cam_add_one_entry(hw, macaddr, key_index,
2207                                                entry_id, enc_algo,
2208                                                CAM_CONFIG_NO_USEDK,
2209                                                rtlpriv->sec.key_buf
2210                                                [entry_id]);
2211                        }
2212                }
2213        }
2214}
2215
2216void rtl92de_suspend(struct ieee80211_hw *hw)
2217{
2218        struct rtl_priv *rtlpriv = rtl_priv(hw);
2219
2220        rtlpriv->rtlhal.macphyctl_reg = rtl_read_byte(rtlpriv,
2221                REG_MAC_PHY_CTRL_NORMAL);
2222}
2223
2224void rtl92de_resume(struct ieee80211_hw *hw)
2225{
2226        struct rtl_priv *rtlpriv = rtl_priv(hw);
2227
2228        rtl_write_byte(rtlpriv, REG_MAC_PHY_CTRL_NORMAL,
2229                       rtlpriv->rtlhal.macphyctl_reg);
2230}
2231