linux/drivers/regulator/hi6421-regulator.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0
   2//
   3// Device driver for regulators in Hi6421 IC
   4//
   5// Copyright (c) <2011-2014> HiSilicon Technologies Co., Ltd.
   6//              http://www.hisilicon.com
   7// Copyright (c) <2013-2014> Linaro Ltd.
   8//              http://www.linaro.org
   9//
  10// Author: Guodong Xu <guodong.xu@linaro.org>
  11
  12#include <linux/slab.h>
  13#include <linux/device.h>
  14#include <linux/module.h>
  15#include <linux/err.h>
  16#include <linux/platform_device.h>
  17#include <linux/of.h>
  18#include <linux/regmap.h>
  19#include <linux/regulator/driver.h>
  20#include <linux/regulator/machine.h>
  21#include <linux/regulator/of_regulator.h>
  22#include <linux/mfd/hi6421-pmic.h>
  23
  24/*
  25 * struct hi6421_regulator_pdata - Hi6421 regulator data of platform device
  26 * @lock: mutex to serialize regulator enable
  27 */
  28struct hi6421_regulator_pdata {
  29        struct mutex lock;
  30};
  31
  32/*
  33 * struct hi6421_regulator_info - hi6421 regulator information
  34 * @desc: regulator description
  35 * @mode_mask: ECO mode bitmask of LDOs; for BUCKs, this masks sleep
  36 * @eco_microamp: eco mode load upper limit (in uA), valid for LDOs only
  37 */
  38struct hi6421_regulator_info {
  39        struct regulator_desc   desc;
  40        u8              mode_mask;
  41        u32             eco_microamp;
  42};
  43
  44/* HI6421 regulators */
  45enum hi6421_regulator_id {
  46        HI6421_LDO0,
  47        HI6421_LDO1,
  48        HI6421_LDO2,
  49        HI6421_LDO3,
  50        HI6421_LDO4,
  51        HI6421_LDO5,
  52        HI6421_LDO6,
  53        HI6421_LDO7,
  54        HI6421_LDO8,
  55        HI6421_LDO9,
  56        HI6421_LDO10,
  57        HI6421_LDO11,
  58        HI6421_LDO12,
  59        HI6421_LDO13,
  60        HI6421_LDO14,
  61        HI6421_LDO15,
  62        HI6421_LDO16,
  63        HI6421_LDO17,
  64        HI6421_LDO18,
  65        HI6421_LDO19,
  66        HI6421_LDO20,
  67        HI6421_LDOAUDIO,
  68        HI6421_BUCK0,
  69        HI6421_BUCK1,
  70        HI6421_BUCK2,
  71        HI6421_BUCK3,
  72        HI6421_BUCK4,
  73        HI6421_BUCK5,
  74        HI6421_NUM_REGULATORS,
  75};
  76
  77/* LDO 0, 4~7, 9~14, 16~20 have same voltage table. */
  78static const unsigned int ldo_0_voltages[] = {
  79        1500000, 1800000, 2400000, 2500000,
  80        2600000, 2700000, 2850000, 3000000,
  81};
  82
  83/* LDO 8, 15 have same voltage table. */
  84static const unsigned int ldo_8_voltages[] = {
  85        1500000, 1800000, 2400000, 2600000,
  86        2700000, 2850000, 3000000, 3300000,
  87};
  88
  89/* Ranges are sorted in ascending order. */
  90static const struct regulator_linear_range ldo_audio_volt_range[] = {
  91        REGULATOR_LINEAR_RANGE(2800000, 0, 3, 50000),
  92        REGULATOR_LINEAR_RANGE(3000000, 4, 7, 100000),
  93};
  94
  95static const unsigned int buck_3_voltages[] = {
  96         950000, 1050000, 1100000, 1117000,
  97        1134000, 1150000, 1167000, 1200000,
  98};
  99
 100static const unsigned int buck_4_voltages[] = {
 101        1150000, 1200000, 1250000, 1350000,
 102        1700000, 1800000, 1900000, 2000000,
 103};
 104
 105static const unsigned int buck_5_voltages[] = {
 106        1150000, 1200000, 1250000, 1350000,
 107        1600000, 1700000, 1800000, 1900000,
 108};
 109
 110static const struct regulator_ops hi6421_ldo_ops;
 111static const struct regulator_ops hi6421_ldo_linear_ops;
 112static const struct regulator_ops hi6421_ldo_linear_range_ops;
 113static const struct regulator_ops hi6421_buck012_ops;
 114static const struct regulator_ops hi6421_buck345_ops;
 115
 116#define HI6421_LDO_ENABLE_TIME (350)
 117/*
 118 * _id - LDO id name string
 119 * _match - of match name string
 120 * v_table - voltage table
 121 * vreg - voltage select register
 122 * vmask - voltage select mask
 123 * ereg - enable register
 124 * emask - enable mask
 125 * odelay - off/on delay time in uS
 126 * ecomask - eco mode mask
 127 * ecoamp - eco mode load uppler limit in uA
 128 */
 129#define HI6421_LDO(_id, _match, v_table, vreg, vmask, ereg, emask,      \
 130                   odelay, ecomask, ecoamp)                             \
 131        [HI6421_##_id] = {                                              \
 132                .desc = {                                               \
 133                        .name           = #_id,                         \
 134                        .of_match        = of_match_ptr(#_match),       \
 135                        .regulators_node = of_match_ptr("regulators"),  \
 136                        .ops            = &hi6421_ldo_ops,              \
 137                        .type           = REGULATOR_VOLTAGE,            \
 138                        .id             = HI6421_##_id,                 \
 139                        .owner          = THIS_MODULE,                  \
 140                        .n_voltages     = ARRAY_SIZE(v_table),          \
 141                        .volt_table     = v_table,                      \
 142                        .vsel_reg       = HI6421_REG_TO_BUS_ADDR(vreg), \
 143                        .vsel_mask      = vmask,                        \
 144                        .enable_reg     = HI6421_REG_TO_BUS_ADDR(ereg), \
 145                        .enable_mask    = emask,                        \
 146                        .enable_time    = HI6421_LDO_ENABLE_TIME,       \
 147                        .off_on_delay   = odelay,                       \
 148                },                                                      \
 149                .mode_mask              = ecomask,                      \
 150                .eco_microamp           = ecoamp,                       \
 151        }
 152
 153/* HI6421 LDO1~3 are linear voltage regulators at fixed uV_step
 154 *
 155 * _id - LDO id name string
 156 * _match - of match name string
 157 * _min_uV - minimum voltage supported in uV
 158 * n_volt - number of votages available
 159 * vstep - voltage increase in each linear step in uV
 160 * vreg - voltage select register
 161 * vmask - voltage select mask
 162 * ereg - enable register
 163 * emask - enable mask
 164 * odelay - off/on delay time in uS
 165 * ecomask - eco mode mask
 166 * ecoamp - eco mode load uppler limit in uA
 167 */
 168#define HI6421_LDO_LINEAR(_id, _match, _min_uV, n_volt, vstep, vreg, vmask,\
 169                          ereg, emask, odelay, ecomask, ecoamp)         \
 170        [HI6421_##_id] = {                                              \
 171                .desc = {                                               \
 172                        .name           = #_id,                         \
 173                        .of_match        = of_match_ptr(#_match),       \
 174                        .regulators_node = of_match_ptr("regulators"),  \
 175                        .ops            = &hi6421_ldo_linear_ops,       \
 176                        .type           = REGULATOR_VOLTAGE,            \
 177                        .id             = HI6421_##_id,                 \
 178                        .owner          = THIS_MODULE,                  \
 179                        .min_uV         = _min_uV,                      \
 180                        .n_voltages     = n_volt,                       \
 181                        .uV_step        = vstep,                        \
 182                        .vsel_reg       = HI6421_REG_TO_BUS_ADDR(vreg), \
 183                        .vsel_mask      = vmask,                        \
 184                        .enable_reg     = HI6421_REG_TO_BUS_ADDR(ereg), \
 185                        .enable_mask    = emask,                        \
 186                        .enable_time    = HI6421_LDO_ENABLE_TIME,       \
 187                        .off_on_delay   = odelay,                       \
 188                },                                                      \
 189                .mode_mask              = ecomask,                      \
 190                .eco_microamp           = ecoamp,                       \
 191        }
 192
 193/* HI6421 LDOAUDIO is a linear voltage regulator with two 4-step ranges
 194 *
 195 * _id - LDO id name string
 196 * _match - of match name string
 197 * n_volt - number of votages available
 198 * volt_ranges - array of regulator_linear_range
 199 * vstep - voltage increase in each linear step in uV
 200 * vreg - voltage select register
 201 * vmask - voltage select mask
 202 * ereg - enable register
 203 * emask - enable mask
 204 * odelay - off/on delay time in uS
 205 * ecomask - eco mode mask
 206 * ecoamp - eco mode load uppler limit in uA
 207 */
 208#define HI6421_LDO_LINEAR_RANGE(_id, _match, n_volt, volt_ranges, vreg, vmask,\
 209                                ereg, emask, odelay, ecomask, ecoamp)   \
 210        [HI6421_##_id] = {                                              \
 211                .desc = {                                               \
 212                        .name           = #_id,                         \
 213                        .of_match        = of_match_ptr(#_match),       \
 214                        .regulators_node = of_match_ptr("regulators"),  \
 215                        .ops            = &hi6421_ldo_linear_range_ops, \
 216                        .type           = REGULATOR_VOLTAGE,            \
 217                        .id             = HI6421_##_id,                 \
 218                        .owner          = THIS_MODULE,                  \
 219                        .n_voltages     = n_volt,                       \
 220                        .linear_ranges  = volt_ranges,                  \
 221                        .n_linear_ranges = ARRAY_SIZE(volt_ranges),     \
 222                        .vsel_reg       = HI6421_REG_TO_BUS_ADDR(vreg), \
 223                        .vsel_mask      = vmask,                        \
 224                        .enable_reg     = HI6421_REG_TO_BUS_ADDR(ereg), \
 225                        .enable_mask    = emask,                        \
 226                        .enable_time    = HI6421_LDO_ENABLE_TIME,       \
 227                        .off_on_delay   = odelay,                       \
 228                },                                                      \
 229                .mode_mask              = ecomask,                      \
 230                .eco_microamp           = ecoamp,                       \
 231        }
 232
 233/* HI6421 BUCK0/1/2 are linear voltage regulators at fixed uV_step
 234 *
 235 * _id - BUCK0/1/2 id name string
 236 * _match - of match name string
 237 * vreg - voltage select register
 238 * vmask - voltage select mask
 239 * ereg - enable register
 240 * emask - enable mask
 241 * sleepmask - mask of sleep mode
 242 * etime - enable time
 243 * odelay - off/on delay time in uS
 244 */
 245#define HI6421_BUCK012(_id, _match, vreg, vmask, ereg, emask, sleepmask,\
 246                        etime, odelay)                                  \
 247        [HI6421_##_id] = {                                              \
 248                .desc = {                                               \
 249                        .name           = #_id,                         \
 250                        .of_match        = of_match_ptr(#_match),       \
 251                        .regulators_node = of_match_ptr("regulators"),  \
 252                        .ops            = &hi6421_buck012_ops,          \
 253                        .type           = REGULATOR_VOLTAGE,            \
 254                        .id             = HI6421_##_id,                 \
 255                        .owner          = THIS_MODULE,                  \
 256                        .min_uV         = 700000,                       \
 257                        .n_voltages     = 128,                          \
 258                        .uV_step        = 7086,                         \
 259                        .vsel_reg       = HI6421_REG_TO_BUS_ADDR(vreg), \
 260                        .vsel_mask      = vmask,                        \
 261                        .enable_reg     = HI6421_REG_TO_BUS_ADDR(ereg), \
 262                        .enable_mask    = emask,                        \
 263                        .enable_time    = etime,                        \
 264                        .off_on_delay   = odelay,                       \
 265                },                                                      \
 266                .mode_mask              = sleepmask,                    \
 267        }
 268
 269/* HI6421 BUCK3/4/5 share similar configurations as LDOs, with exception
 270 *  that it supports SLEEP mode, so has different .ops.
 271 *
 272 * _id - LDO id name string
 273 * _match - of match name string
 274 * v_table - voltage table
 275 * vreg - voltage select register
 276 * vmask - voltage select mask
 277 * ereg - enable register
 278 * emask - enable mask
 279 * odelay - off/on delay time in uS
 280 * sleepmask - mask of sleep mode
 281 */
 282#define HI6421_BUCK345(_id, _match, v_table, vreg, vmask, ereg, emask,  \
 283                        odelay, sleepmask)                              \
 284        [HI6421_##_id] = {                                              \
 285                .desc = {                                               \
 286                        .name           = #_id,                         \
 287                        .of_match        = of_match_ptr(#_match),       \
 288                        .regulators_node = of_match_ptr("regulators"),  \
 289                        .ops            = &hi6421_buck345_ops,          \
 290                        .type           = REGULATOR_VOLTAGE,            \
 291                        .id             = HI6421_##_id,                 \
 292                        .owner          = THIS_MODULE,                  \
 293                        .n_voltages     = ARRAY_SIZE(v_table),          \
 294                        .volt_table     = v_table,                      \
 295                        .vsel_reg       = HI6421_REG_TO_BUS_ADDR(vreg), \
 296                        .vsel_mask      = vmask,                        \
 297                        .enable_reg     = HI6421_REG_TO_BUS_ADDR(ereg), \
 298                        .enable_mask    = emask,                        \
 299                        .enable_time    = HI6421_LDO_ENABLE_TIME,       \
 300                        .off_on_delay   = odelay,                       \
 301                },                                                      \
 302                .mode_mask              = sleepmask,                    \
 303        }
 304
 305/* HI6421 regulator information */
 306static struct hi6421_regulator_info
 307                hi6421_regulator_info[HI6421_NUM_REGULATORS] = {
 308        HI6421_LDO(LDO0, hi6421_vout0, ldo_0_voltages, 0x20, 0x07, 0x20, 0x10,
 309                   10000, 0x20, 8000),
 310        HI6421_LDO_LINEAR(LDO1, hi6421_vout1, 1700000, 4, 100000, 0x21, 0x03,
 311                          0x21, 0x10, 10000, 0x20, 5000),
 312        HI6421_LDO_LINEAR(LDO2, hi6421_vout2, 1050000, 8, 50000, 0x22, 0x07,
 313                          0x22, 0x10, 20000, 0x20, 8000),
 314        HI6421_LDO_LINEAR(LDO3, hi6421_vout3, 1050000, 8, 50000, 0x23, 0x07,
 315                          0x23, 0x10, 20000, 0x20, 8000),
 316        HI6421_LDO(LDO4, hi6421_vout4, ldo_0_voltages, 0x24, 0x07, 0x24, 0x10,
 317                   20000, 0x20, 8000),
 318        HI6421_LDO(LDO5, hi6421_vout5, ldo_0_voltages, 0x25, 0x07, 0x25, 0x10,
 319                   20000, 0x20, 8000),
 320        HI6421_LDO(LDO6, hi6421_vout6, ldo_0_voltages, 0x26, 0x07, 0x26, 0x10,
 321                   20000, 0x20, 8000),
 322        HI6421_LDO(LDO7, hi6421_vout7, ldo_0_voltages, 0x27, 0x07, 0x27, 0x10,
 323                   20000, 0x20, 5000),
 324        HI6421_LDO(LDO8, hi6421_vout8, ldo_8_voltages, 0x28, 0x07, 0x28, 0x10,
 325                   20000, 0x20, 8000),
 326        HI6421_LDO(LDO9, hi6421_vout9, ldo_0_voltages, 0x29, 0x07, 0x29, 0x10,
 327                   40000, 0x20, 8000),
 328        HI6421_LDO(LDO10, hi6421_vout10, ldo_0_voltages, 0x2a, 0x07, 0x2a, 0x10,
 329                   40000, 0x20, 8000),
 330        HI6421_LDO(LDO11, hi6421_vout11, ldo_0_voltages, 0x2b, 0x07, 0x2b, 0x10,
 331                   40000, 0x20, 8000),
 332        HI6421_LDO(LDO12, hi6421_vout12, ldo_0_voltages, 0x2c, 0x07, 0x2c, 0x10,
 333                   40000, 0x20, 8000),
 334        HI6421_LDO(LDO13, hi6421_vout13, ldo_0_voltages, 0x2d, 0x07, 0x2d, 0x10,
 335                   40000, 0x20, 8000),
 336        HI6421_LDO(LDO14, hi6421_vout14, ldo_0_voltages, 0x2e, 0x07, 0x2e, 0x10,
 337                   40000, 0x20, 8000),
 338        HI6421_LDO(LDO15, hi6421_vout15, ldo_8_voltages, 0x2f, 0x07, 0x2f, 0x10,
 339                   40000, 0x20, 8000),
 340        HI6421_LDO(LDO16, hi6421_vout16, ldo_0_voltages, 0x30, 0x07, 0x30, 0x10,
 341                   40000, 0x20, 8000),
 342        HI6421_LDO(LDO17, hi6421_vout17, ldo_0_voltages, 0x31, 0x07, 0x31, 0x10,
 343                   40000, 0x20, 8000),
 344        HI6421_LDO(LDO18, hi6421_vout18, ldo_0_voltages, 0x32, 0x07, 0x32, 0x10,
 345                   40000, 0x20, 8000),
 346        HI6421_LDO(LDO19, hi6421_vout19, ldo_0_voltages, 0x33, 0x07, 0x33, 0x10,
 347                   40000, 0x20, 8000),
 348        HI6421_LDO(LDO20, hi6421_vout20, ldo_0_voltages, 0x34, 0x07, 0x34, 0x10,
 349                   40000, 0x20, 8000),
 350        HI6421_LDO_LINEAR_RANGE(LDOAUDIO, hi6421_vout_audio, 8,
 351                                ldo_audio_volt_range, 0x36, 0x70, 0x36, 0x01,
 352                                40000, 0x02, 5000),
 353        HI6421_BUCK012(BUCK0, hi6421_buck0, 0x0d, 0x7f, 0x0c, 0x01, 0x10, 400,
 354                       20000),
 355        HI6421_BUCK012(BUCK1, hi6421_buck1, 0x0f, 0x7f, 0x0e, 0x01, 0x10, 400,
 356                       20000),
 357        HI6421_BUCK012(BUCK2, hi6421_buck2, 0x11, 0x7f, 0x10, 0x01, 0x10, 350,
 358                       100),
 359        HI6421_BUCK345(BUCK3, hi6421_buck3, buck_3_voltages, 0x13, 0x07, 0x12,
 360                       0x01, 20000, 0x10),
 361        HI6421_BUCK345(BUCK4, hi6421_buck4, buck_4_voltages, 0x15, 0x07, 0x14,
 362                       0x01, 20000, 0x10),
 363        HI6421_BUCK345(BUCK5, hi6421_buck5, buck_5_voltages, 0x17, 0x07, 0x16,
 364                       0x01, 20000, 0x10),
 365};
 366
 367static int hi6421_regulator_enable(struct regulator_dev *rdev)
 368{
 369        struct hi6421_regulator_pdata *pdata;
 370
 371        pdata = dev_get_drvdata(rdev->dev.parent);
 372        /* hi6421 spec requires regulator enablement must be serialized:
 373         *  - Because when BUCK, LDO switching from off to on, it will have
 374         *    a huge instantaneous current; so you can not turn on two or
 375         *    more LDO or BUCKs simultaneously, or it may burn the chip.
 376         */
 377        mutex_lock(&pdata->lock);
 378
 379        /* call regulator regmap helper */
 380        regulator_enable_regmap(rdev);
 381
 382        mutex_unlock(&pdata->lock);
 383        return 0;
 384}
 385
 386static unsigned int hi6421_regulator_ldo_get_mode(struct regulator_dev *rdev)
 387{
 388        struct hi6421_regulator_info *info = rdev_get_drvdata(rdev);
 389        u32 reg_val;
 390
 391        regmap_read(rdev->regmap, rdev->desc->enable_reg, &reg_val);
 392        if (reg_val & info->mode_mask)
 393                return REGULATOR_MODE_IDLE;
 394
 395        return REGULATOR_MODE_NORMAL;
 396}
 397
 398static unsigned int hi6421_regulator_buck_get_mode(struct regulator_dev *rdev)
 399{
 400        struct hi6421_regulator_info *info = rdev_get_drvdata(rdev);
 401        u32 reg_val;
 402
 403        regmap_read(rdev->regmap, rdev->desc->enable_reg, &reg_val);
 404        if (reg_val & info->mode_mask)
 405                return REGULATOR_MODE_STANDBY;
 406
 407        return REGULATOR_MODE_NORMAL;
 408}
 409
 410static int hi6421_regulator_ldo_set_mode(struct regulator_dev *rdev,
 411                                                unsigned int mode)
 412{
 413        struct hi6421_regulator_info *info = rdev_get_drvdata(rdev);
 414        u32 new_mode;
 415
 416        switch (mode) {
 417        case REGULATOR_MODE_NORMAL:
 418                new_mode = 0;
 419                break;
 420        case REGULATOR_MODE_IDLE:
 421                new_mode = info->mode_mask;
 422                break;
 423        default:
 424                return -EINVAL;
 425        }
 426
 427        /* set mode */
 428        regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 429                           info->mode_mask, new_mode);
 430
 431        return 0;
 432}
 433
 434static int hi6421_regulator_buck_set_mode(struct regulator_dev *rdev,
 435                                                unsigned int mode)
 436{
 437        struct hi6421_regulator_info *info = rdev_get_drvdata(rdev);
 438        u32 new_mode;
 439
 440        switch (mode) {
 441        case REGULATOR_MODE_NORMAL:
 442                new_mode = 0;
 443                break;
 444        case REGULATOR_MODE_STANDBY:
 445                new_mode = info->mode_mask;
 446                break;
 447        default:
 448                return -EINVAL;
 449        }
 450
 451        /* set mode */
 452        regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 453                           info->mode_mask, new_mode);
 454
 455        return 0;
 456}
 457
 458static unsigned int
 459hi6421_regulator_ldo_get_optimum_mode(struct regulator_dev *rdev,
 460                        int input_uV, int output_uV, int load_uA)
 461{
 462        struct hi6421_regulator_info *info = rdev_get_drvdata(rdev);
 463
 464        if (load_uA > info->eco_microamp)
 465                return REGULATOR_MODE_NORMAL;
 466
 467        return REGULATOR_MODE_IDLE;
 468}
 469
 470static const struct regulator_ops hi6421_ldo_ops = {
 471        .is_enabled = regulator_is_enabled_regmap,
 472        .enable = hi6421_regulator_enable,
 473        .disable = regulator_disable_regmap,
 474        .list_voltage = regulator_list_voltage_table,
 475        .map_voltage = regulator_map_voltage_ascend,
 476        .get_voltage_sel = regulator_get_voltage_sel_regmap,
 477        .set_voltage_sel = regulator_set_voltage_sel_regmap,
 478        .get_mode = hi6421_regulator_ldo_get_mode,
 479        .set_mode = hi6421_regulator_ldo_set_mode,
 480        .get_optimum_mode = hi6421_regulator_ldo_get_optimum_mode,
 481};
 482
 483static const struct regulator_ops hi6421_ldo_linear_ops = {
 484        .is_enabled = regulator_is_enabled_regmap,
 485        .enable = hi6421_regulator_enable,
 486        .disable = regulator_disable_regmap,
 487        .list_voltage = regulator_list_voltage_linear,
 488        .map_voltage = regulator_map_voltage_linear,
 489        .get_voltage_sel = regulator_get_voltage_sel_regmap,
 490        .set_voltage_sel = regulator_set_voltage_sel_regmap,
 491        .get_mode = hi6421_regulator_ldo_get_mode,
 492        .set_mode = hi6421_regulator_ldo_set_mode,
 493        .get_optimum_mode = hi6421_regulator_ldo_get_optimum_mode,
 494};
 495
 496static const struct regulator_ops hi6421_ldo_linear_range_ops = {
 497        .is_enabled = regulator_is_enabled_regmap,
 498        .enable = hi6421_regulator_enable,
 499        .disable = regulator_disable_regmap,
 500        .list_voltage = regulator_list_voltage_linear_range,
 501        .map_voltage = regulator_map_voltage_linear_range,
 502        .get_voltage_sel = regulator_get_voltage_sel_regmap,
 503        .set_voltage_sel = regulator_set_voltage_sel_regmap,
 504        .get_mode = hi6421_regulator_ldo_get_mode,
 505        .set_mode = hi6421_regulator_ldo_set_mode,
 506        .get_optimum_mode = hi6421_regulator_ldo_get_optimum_mode,
 507};
 508
 509static const struct regulator_ops hi6421_buck012_ops = {
 510        .is_enabled = regulator_is_enabled_regmap,
 511        .enable = hi6421_regulator_enable,
 512        .disable = regulator_disable_regmap,
 513        .list_voltage = regulator_list_voltage_linear,
 514        .map_voltage = regulator_map_voltage_linear,
 515        .get_voltage_sel = regulator_get_voltage_sel_regmap,
 516        .set_voltage_sel = regulator_set_voltage_sel_regmap,
 517        .get_mode = hi6421_regulator_buck_get_mode,
 518        .set_mode = hi6421_regulator_buck_set_mode,
 519};
 520
 521static const struct regulator_ops hi6421_buck345_ops = {
 522        .is_enabled = regulator_is_enabled_regmap,
 523        .enable = hi6421_regulator_enable,
 524        .disable = regulator_disable_regmap,
 525        .list_voltage = regulator_list_voltage_table,
 526        .map_voltage = regulator_map_voltage_ascend,
 527        .get_voltage_sel = regulator_get_voltage_sel_regmap,
 528        .set_voltage_sel = regulator_set_voltage_sel_regmap,
 529        .get_mode = hi6421_regulator_buck_get_mode,
 530        .set_mode = hi6421_regulator_buck_set_mode,
 531};
 532
 533static int hi6421_regulator_probe(struct platform_device *pdev)
 534{
 535        struct hi6421_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
 536        struct hi6421_regulator_pdata *pdata;
 537        struct hi6421_regulator_info *info;
 538        struct regulator_config config = { };
 539        struct regulator_dev *rdev;
 540        int i;
 541
 542        pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
 543        if (!pdata)
 544                return -ENOMEM;
 545        mutex_init(&pdata->lock);
 546        platform_set_drvdata(pdev, pdata);
 547
 548        for (i = 0; i < ARRAY_SIZE(hi6421_regulator_info); i++) {
 549                /* assign per-regulator data */
 550                info = &hi6421_regulator_info[i];
 551
 552                config.dev = pdev->dev.parent;
 553                config.driver_data = info;
 554                config.regmap = pmic->regmap;
 555
 556                rdev = devm_regulator_register(&pdev->dev, &info->desc,
 557                                               &config);
 558                if (IS_ERR(rdev)) {
 559                        dev_err(&pdev->dev, "failed to register regulator %s\n",
 560                                info->desc.name);
 561                        return PTR_ERR(rdev);
 562                }
 563        }
 564
 565        return 0;
 566}
 567
 568static const struct platform_device_id hi6421_regulator_table[] = {
 569        { .name = "hi6421-regulator" },
 570        {},
 571};
 572MODULE_DEVICE_TABLE(platform, hi6421_regulator_table);
 573
 574static struct platform_driver hi6421_regulator_driver = {
 575        .id_table = hi6421_regulator_table,
 576        .driver = {
 577                .name   = "hi6421-regulator",
 578        },
 579        .probe  = hi6421_regulator_probe,
 580};
 581module_platform_driver(hi6421_regulator_driver);
 582
 583MODULE_AUTHOR("Guodong Xu <guodong.xu@linaro.org>");
 584MODULE_DESCRIPTION("Hi6421 regulator driver");
 585MODULE_LICENSE("GPL v2");
 586