LXR linux/drivers/staging/rtl8723bs/include/rtw

   1/* SPDX-License-Identifier: GPL-2.0 */
   2/******************************************************************************
   3 *
   4 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
   5 *
   6 ******************************************************************************/
   7#ifndef __RTW_RF_H_
   8#define __RTW_RF_H_
   9
  10
  11#define OFDM_PHY                1
  12#define MIXED_PHY               2
  13#define CCK_PHY                 3
  14
  15#define NumRates                13
  16
  17/*  slot time for 11g */
  18#define SHORT_SLOT_TIME         9
  19#define NON_SHORT_SLOT_TIME     20
  20
  21#define RTL8711_RF_MAX_SENS      6
  22#define RTL8711_RF_DEF_SENS      4
  23
  24/*  */
  25/*  We now define the following channels as the max channels in each channel plan. */
  26/*  2G, total 14 chnls */
  27/*  {1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14} */
  28/*  5G, total 24 chnls */
  29/*  {36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120,
  30 *   124, 128, 132, 136, 140, 149, 153, 157, 161, 165} */
  31#define MAX_CHANNEL_NUM_2G      14
  32#define MAX_CHANNEL_NUM_5G      24
  33#define MAX_CHANNEL_NUM         38/* 14+24 */
  34
  35#define NUM_REGULATORYS 1
  36
  37/* Country codes */
  38#define USA                     0x555320
  39#define EUROPE                  0x1 /* temp, should be provided later */
  40#define JAPAN                   0x2 /* temp, should be provided later */
  41
  42struct  regulatory_class {
  43        u32 starting_freq;                      /* MHz, */
  44        u8 channel_set[MAX_CHANNEL_NUM];
  45        u8 channel_cck_power[MAX_CHANNEL_NUM];/* dbm */
  46        u8 channel_ofdm_power[MAX_CHANNEL_NUM];/* dbm */
  47        u8 txpower_limit;                       /* dbm */
  48        u8 channel_spacing;                     /* MHz */
  49        u8 modem;
  50};
  51
  52enum CAPABILITY {
  53        cESS                    = 0x0001,
  54        cIBSS                   = 0x0002,
  55        cPollable               = 0x0004,
  56        cPollReq                = 0x0008,
  57        cPrivacy                = 0x0010,
  58        cShortPreamble          = 0x0020,
  59        cPBCC                   = 0x0040,
  60        cChannelAgility         = 0x0080,
  61        cSpectrumMgnt           = 0x0100,
  62        cQos                    = 0x0200,       /*  For HCCA, use with CF-Pollable and CF-PollReq */
  63        cShortSlotTime          = 0x0400,
  64        cAPSD                   = 0x0800,
  65        cRM                     = 0x1000,       /*  RRM (Radio Request Measurement) */
  66        cDSSS_OFDM              = 0x2000,
  67        cDelayedBA              = 0x4000,
  68        cImmediateBA            = 0x8000,
  69};
  70
  71enum    _REG_PREAMBLE_MODE {
  72        PREAMBLE_LONG   = 1,
  73        PREAMBLE_AUTO   = 2,
  74        PREAMBLE_SHORT  = 3,
  75};
  76
  77enum _RTL8712_RF_MIMO_CONFIG_ {
  78        RTL8712_RFCONFIG_1T = 0x10,
  79        RTL8712_RFCONFIG_2T = 0x20,
  80        RTL8712_RFCONFIG_1R = 0x01,
  81        RTL8712_RFCONFIG_2R = 0x02,
  82        RTL8712_RFCONFIG_1T1R = 0x11,
  83        RTL8712_RFCONFIG_1T2R = 0x12,
  84        RTL8712_RFCONFIG_TURBO = 0x92,
  85        RTL8712_RFCONFIG_2T2R = 0x22
  86};
  87
  88enum RF90_RADIO_PATH {
  89        RF90_PATH_A = 0,                /* Radio Path A */
  90        RF90_PATH_B = 1,                /* Radio Path B */
  91        RF90_PATH_C = 2,                /* Radio Path C */
  92        RF90_PATH_D = 3                 /* Radio Path D */
  93};
  94
  95/*  Bandwidth Offset */
  96#define HAL_PRIME_CHNL_OFFSET_DONT_CARE 0
  97#define HAL_PRIME_CHNL_OFFSET_LOWER     1
  98#define HAL_PRIME_CHNL_OFFSET_UPPER     2
  99
 100/*  Represent Channel Width in HT Capabilities */
 101enum CHANNEL_WIDTH {
 102        CHANNEL_WIDTH_20 = 0,
 103        CHANNEL_WIDTH_40 = 1,
 104        CHANNEL_WIDTH_80 = 2,
 105        CHANNEL_WIDTH_160 = 3,
 106        CHANNEL_WIDTH_80_80 = 4,
 107        CHANNEL_WIDTH_MAX = 5,
 108};
 109
 110/*  Represent Extension Channel Offset in HT Capabilities */
 111/*  This is available only in 40Mhz mode. */
 112enum EXTCHNL_OFFSET {
 113        EXTCHNL_OFFSET_NO_EXT = 0,
 114        EXTCHNL_OFFSET_UPPER = 1,
 115        EXTCHNL_OFFSET_NO_DEF = 2,
 116        EXTCHNL_OFFSET_LOWER = 3,
 117};
 118
 119enum VHT_DATA_SC {
 120        VHT_DATA_SC_DONOT_CARE = 0,
 121        VHT_DATA_SC_20_UPPER_OF_80MHZ = 1,
 122        VHT_DATA_SC_20_LOWER_OF_80MHZ = 2,
 123        VHT_DATA_SC_20_UPPERST_OF_80MHZ = 3,
 124        VHT_DATA_SC_20_LOWEST_OF_80MHZ = 4,
 125        VHT_DATA_SC_20_RECV1 = 5,
 126        VHT_DATA_SC_20_RECV2 = 6,
 127        VHT_DATA_SC_20_RECV3 = 7,
 128        VHT_DATA_SC_20_RECV4 = 8,
 129        VHT_DATA_SC_40_UPPER_OF_80MHZ = 9,
 130        VHT_DATA_SC_40_LOWER_OF_80MHZ = 10,
 131};
 132
 133enum PROTECTION_MODE {
 134        PROTECTION_MODE_AUTO = 0,
 135        PROTECTION_MODE_FORCE_ENABLE = 1,
 136        PROTECTION_MODE_FORCE_DISABLE = 2,
 137};
 138
 139/* 2007/11/15 MH Define different RF type. */
 140enum RT_RF_TYPE_DEFINITION {
 141        RF_1T2R = 0,
 142        RF_2T4R = 1,
 143        RF_2T2R = 2,
 144        RF_1T1R = 3,
 145        RF_2T2R_GREEN = 4,
 146        RF_MAX_TYPE = 5,
 147};
 148
 149u32 rtw_ch2freq(u32 ch);
 150
 151#endif /* _RTL8711_RF_H_ */
 152