linux/include/pcmcia/ss.h
<<
>>
Prefs
   1/* SPDX-License-Identifier: GPL-2.0-only */
   2/*
   3 * ss.h
   4 *
   5 * The initial developer of the original code is David A. Hinds
   6 * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
   7 * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
   8 *
   9 * (C) 1999             David A. Hinds
  10 */
  11
  12#ifndef _LINUX_SS_H
  13#define _LINUX_SS_H
  14
  15#include <linux/device.h>
  16#include <linux/sched.h>        /* task_struct, completion */
  17#include <linux/mutex.h>
  18
  19#ifdef CONFIG_CARDBUS
  20#include <linux/pci.h>
  21#endif
  22
  23/* Definitions for card status flags for GetStatus */
  24#define SS_WRPROT       0x0001
  25#define SS_CARDLOCK     0x0002
  26#define SS_EJECTION     0x0004
  27#define SS_INSERTION    0x0008
  28#define SS_BATDEAD      0x0010
  29#define SS_BATWARN      0x0020
  30#define SS_READY        0x0040
  31#define SS_DETECT       0x0080
  32#define SS_POWERON      0x0100
  33#define SS_GPI          0x0200
  34#define SS_STSCHG       0x0400
  35#define SS_CARDBUS      0x0800
  36#define SS_3VCARD       0x1000
  37#define SS_XVCARD       0x2000
  38#define SS_PENDING      0x4000
  39#define SS_ZVCARD       0x8000
  40
  41/* InquireSocket capabilities */
  42#define SS_CAP_PAGE_REGS        0x0001
  43#define SS_CAP_VIRTUAL_BUS      0x0002
  44#define SS_CAP_MEM_ALIGN        0x0004
  45#define SS_CAP_STATIC_MAP       0x0008
  46#define SS_CAP_PCCARD           0x4000
  47#define SS_CAP_CARDBUS          0x8000
  48
  49/* for GetSocket, SetSocket */
  50typedef struct socket_state_t {
  51        u_int   flags;
  52        u_int   csc_mask;
  53        u_char  Vcc, Vpp;
  54        u_char  io_irq;
  55} socket_state_t;
  56
  57extern socket_state_t dead_socket;
  58
  59/* Socket configuration flags */
  60#define SS_PWR_AUTO     0x0010
  61#define SS_IOCARD       0x0020
  62#define SS_RESET        0x0040
  63#define SS_DMA_MODE     0x0080
  64#define SS_SPKR_ENA     0x0100
  65#define SS_OUTPUT_ENA   0x0200
  66
  67/* Flags for I/O port and memory windows */
  68#define MAP_ACTIVE      0x01
  69#define MAP_16BIT       0x02
  70#define MAP_AUTOSZ      0x04
  71#define MAP_0WS         0x08
  72#define MAP_WRPROT      0x10
  73#define MAP_ATTRIB      0x20
  74#define MAP_USE_WAIT    0x40
  75#define MAP_PREFETCH    0x80
  76
  77/* Use this just for bridge windows */
  78#define MAP_IOSPACE     0x20
  79
  80/* power hook operations */
  81#define HOOK_POWER_PRE  0x01
  82#define HOOK_POWER_POST 0x02
  83
  84typedef struct pccard_io_map {
  85        u_char  map;
  86        u_char  flags;
  87        u_short speed;
  88        phys_addr_t start, stop;
  89} pccard_io_map;
  90
  91typedef struct pccard_mem_map {
  92        u_char          map;
  93        u_char          flags;
  94        u_short         speed;
  95        phys_addr_t     static_start;
  96        u_int           card_start;
  97        struct resource *res;
  98} pccard_mem_map;
  99
 100typedef struct io_window_t {
 101        u_int                   InUse, Config;
 102        struct resource         *res;
 103} io_window_t;
 104
 105/* Maximum number of IO windows per socket */
 106#define MAX_IO_WIN 2
 107
 108/* Maximum number of memory windows per socket */
 109#define MAX_WIN 4
 110
 111
 112/*
 113 * Socket operations.
 114 */
 115struct pcmcia_socket;
 116struct pccard_resource_ops;
 117struct config_t;
 118struct pcmcia_callback;
 119struct user_info_t;
 120
 121struct pccard_operations {
 122        int (*init)(struct pcmcia_socket *s);
 123        int (*suspend)(struct pcmcia_socket *s);
 124        int (*get_status)(struct pcmcia_socket *s, u_int *value);
 125        int (*set_socket)(struct pcmcia_socket *s, socket_state_t *state);
 126        int (*set_io_map)(struct pcmcia_socket *s, struct pccard_io_map *io);
 127        int (*set_mem_map)(struct pcmcia_socket *s, struct pccard_mem_map *mem);
 128};
 129
 130struct pcmcia_socket {
 131        struct module                   *owner;
 132        socket_state_t                  socket;
 133        u_int                           state;
 134        u_int                           suspended_state;        /* state before suspend */
 135        u_short                         functions;
 136        u_short                         lock_count;
 137        pccard_mem_map                  cis_mem;
 138        void __iomem                    *cis_virt;
 139        io_window_t                     io[MAX_IO_WIN];
 140        pccard_mem_map                  win[MAX_WIN];
 141        struct list_head                cis_cache;
 142        size_t                          fake_cis_len;
 143        u8                              *fake_cis;
 144
 145        struct list_head                socket_list;
 146        struct completion               socket_released;
 147
 148        /* deprecated */
 149        unsigned int                    sock;           /* socket number */
 150
 151
 152        /* socket capabilities */
 153        u_int                           features;
 154        u_int                           irq_mask;
 155        u_int                           map_size;
 156        u_int                           io_offset;
 157        u_int                           pci_irq;
 158        struct pci_dev                  *cb_dev;
 159
 160        /* socket setup is done so resources should be able to be allocated.
 161         * Only if set to 1, calls to find_{io,mem}_region are handled, and
 162         * insertio events are actually managed by the PCMCIA layer.*/
 163        u8                              resource_setup_done;
 164
 165        /* socket operations */
 166        struct pccard_operations        *ops;
 167        struct pccard_resource_ops      *resource_ops;
 168        void                            *resource_data;
 169
 170        /* Zoom video behaviour is so chip specific its not worth adding
 171           this to _ops */
 172        void                            (*zoom_video)(struct pcmcia_socket *,
 173                                                      int);
 174
 175        /* so is power hook */
 176        int (*power_hook)(struct pcmcia_socket *sock, int operation);
 177
 178        /* allows tuning the CB bridge before loading driver for the CB card */
 179#ifdef CONFIG_CARDBUS
 180        void (*tune_bridge)(struct pcmcia_socket *sock, struct pci_bus *bus);
 181#endif
 182
 183        /* state thread */
 184        struct task_struct              *thread;
 185        struct completion               thread_done;
 186        unsigned int                    thread_events;
 187        unsigned int                    sysfs_events;
 188
 189        /* For the non-trivial interaction between these locks,
 190         * see Documentation/pcmcia/locking.txt */
 191        struct mutex                    skt_mutex;
 192        struct mutex                    ops_mutex;
 193
 194        /* protects thread_events and sysfs_events */
 195        spinlock_t                      thread_lock;
 196
 197        /* pcmcia (16-bit) */
 198        struct pcmcia_callback          *callback;
 199
 200#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE)
 201        /* The following elements refer to 16-bit PCMCIA devices inserted
 202         * into the socket */
 203        struct list_head                devices_list;
 204
 205        /* the number of devices, used only internally and subject to
 206         * incorrectness and change */
 207        u8                              device_count;
 208
 209        /* does the PCMCIA card consist of two pseudo devices? */
 210        u8                              pcmcia_pfc;
 211
 212        /* non-zero if PCMCIA card is present */
 213        atomic_t                        present;
 214
 215        /* IRQ to be used by PCMCIA devices. May not be IRQ 0. */
 216        unsigned int                    pcmcia_irq;
 217
 218#endif /* CONFIG_PCMCIA */
 219
 220        /* socket device */
 221        struct device                   dev;
 222        /* data internal to the socket driver */
 223        void                            *driver_data;
 224        /* status of the card during resume from a system sleep state */
 225        int                             resume_status;
 226};
 227
 228
 229/* socket drivers must define the resource operations type they use. There
 230 * are three options:
 231 * - pccard_static_ops          iomem and ioport areas are assigned statically
 232 * - pccard_iodyn_ops           iomem areas is assigned statically, ioport
 233 *                              areas dynamically
 234 *                              If this option is selected, use
 235 *                              "select PCCARD_IODYN" in Kconfig.
 236 * - pccard_nonstatic_ops       iomem and ioport areas are assigned dynamically.
 237 *                              If this option is selected, use
 238 *                              "select PCCARD_NONSTATIC" in Kconfig.
 239 *
 240 */
 241extern struct pccard_resource_ops pccard_static_ops;
 242#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE)
 243extern struct pccard_resource_ops pccard_iodyn_ops;
 244extern struct pccard_resource_ops pccard_nonstatic_ops;
 245#else
 246/* If PCMCIA is not used, but only CARDBUS, these functions are not used
 247 * at all. Therefore, do not use the large (240K!) rsrc_nonstatic module
 248 */
 249#define pccard_iodyn_ops pccard_static_ops
 250#define pccard_nonstatic_ops pccard_static_ops
 251#endif
 252
 253
 254/* socket drivers use this callback in their IRQ handler */
 255extern void pcmcia_parse_events(struct pcmcia_socket *socket,
 256                                unsigned int events);
 257
 258/* to register and unregister a socket */
 259extern int pcmcia_register_socket(struct pcmcia_socket *socket);
 260extern void pcmcia_unregister_socket(struct pcmcia_socket *socket);
 261
 262
 263#endif /* _LINUX_SS_H */
 264