linux/Documentation/Makefile
<<
>>
Prefs
   1# -*- makefile -*-
   2# Makefile for Sphinx documentation
   3#
   4
   5subdir-y := devicetree/bindings/
   6
   7# Check for broken documentation file references
   8ifeq ($(CONFIG_WARN_MISSING_DOCUMENTS),y)
   9$(shell $(srctree)/scripts/documentation-file-ref-check --warn)
  10endif
  11
  12# You can set these variables from the command line.
  13SPHINXBUILD   = sphinx-build
  14SPHINXOPTS    =
  15SPHINXDIRS    = .
  16_SPHINXDIRS   = $(patsubst $(srctree)/Documentation/%/conf.py,%,$(wildcard $(srctree)/Documentation/*/conf.py))
  17SPHINX_CONF   = conf.py
  18PAPER         =
  19BUILDDIR      = $(obj)/output
  20PDFLATEX      = xelatex
  21LATEXOPTS     = -interaction=batchmode
  22
  23# User-friendly check for sphinx-build
  24HAVE_SPHINX := $(shell if which $(SPHINXBUILD) >/dev/null 2>&1; then echo 1; else echo 0; fi)
  25
  26ifeq ($(HAVE_SPHINX),0)
  27
  28.DEFAULT:
  29        $(warning The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed and in PATH, or set the SPHINXBUILD make variable to point to the full path of the '$(SPHINXBUILD)' executable.)
  30        @echo
  31        @$(srctree)/scripts/sphinx-pre-install
  32        @echo "  SKIP    Sphinx $@ target."
  33
  34else # HAVE_SPHINX
  35
  36export SPHINXOPTS = $(shell perl -e 'open IN,"sphinx-build --version 2>&1 |"; while (<IN>) { if (m/([\d\.]+)/) { print "-jauto" if ($$1 >= "1.7") } ;} close IN')
  37
  38# User-friendly check for pdflatex and latexmk
  39HAVE_PDFLATEX := $(shell if which $(PDFLATEX) >/dev/null 2>&1; then echo 1; else echo 0; fi)
  40HAVE_LATEXMK := $(shell if which latexmk >/dev/null 2>&1; then echo 1; else echo 0; fi)
  41
  42ifeq ($(HAVE_LATEXMK),1)
  43        PDFLATEX := latexmk -$(PDFLATEX)
  44endif #HAVE_LATEXMK
  45
  46# Internal variables.
  47PAPEROPT_a4     = -D latex_paper_size=a4
  48PAPEROPT_letter = -D latex_paper_size=letter
  49KERNELDOC       = $(srctree)/scripts/kernel-doc
  50KERNELDOC_CONF  = -D kerneldoc_srctree=$(srctree) -D kerneldoc_bin=$(KERNELDOC)
  51ALLSPHINXOPTS   =  $(KERNELDOC_CONF) $(PAPEROPT_$(PAPER)) $(SPHINXOPTS)
  52# the i18n builder cannot share the environment and doctrees with the others
  53I18NSPHINXOPTS  = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
  54
  55# commands; the 'cmd' from scripts/Kbuild.include is not *loopable*
  56loop_cmd = $(echo-cmd) $(cmd_$(1)) || exit;
  57
  58# $2 sphinx builder e.g. "html"
  59# $3 name of the build subfolder / e.g. "media", used as:
  60#    * dest folder relative to $(BUILDDIR) and
  61#    * cache folder relative to $(BUILDDIR)/.doctrees
  62# $4 dest subfolder e.g. "man" for man pages at media/man
  63# $5 reST source folder relative to $(srctree)/$(src),
  64#    e.g. "media" for the linux-tv book-set at ./Documentation/media
  65
  66quiet_cmd_sphinx = SPHINX  $@ --> file://$(abspath $(BUILDDIR)/$3/$4)
  67      cmd_sphinx = $(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=Documentation/media $2 && \
  68        PYTHONDONTWRITEBYTECODE=1 \
  69        BUILDDIR=$(abspath $(BUILDDIR)) SPHINX_CONF=$(abspath $(srctree)/$(src)/$5/$(SPHINX_CONF)) \
  70        $(SPHINXBUILD) \
  71        -b $2 \
  72        -c $(abspath $(srctree)/$(src)) \
  73        -d $(abspath $(BUILDDIR)/.doctrees/$3) \
  74        -D version=$(KERNELVERSION) -D release=$(KERNELRELEASE) \
  75        $(ALLSPHINXOPTS) \
  76        $(abspath $(srctree)/$(src)/$5) \
  77        $(abspath $(BUILDDIR)/$3/$4)
  78
  79htmldocs:
  80        @$(srctree)/scripts/sphinx-pre-install --version-check
  81        @+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,html,$(var),,$(var)))
  82
  83linkcheckdocs:
  84        @$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,linkcheck,$(var),,$(var)))
  85
  86latexdocs:
  87        @$(srctree)/scripts/sphinx-pre-install --version-check
  88        @+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,latex,$(var),latex,$(var)))
  89
  90ifeq ($(HAVE_PDFLATEX),0)
  91
  92pdfdocs:
  93        $(warning The '$(PDFLATEX)' command was not found. Make sure you have it installed and in PATH to produce PDF output.)
  94        @echo "  SKIP    Sphinx $@ target."
  95
  96else # HAVE_PDFLATEX
  97
  98pdfdocs: latexdocs
  99        @$(srctree)/scripts/sphinx-pre-install --version-check
 100        $(foreach var,$(SPHINXDIRS), $(MAKE) PDFLATEX="$(PDFLATEX)" LATEXOPTS="$(LATEXOPTS)" -C $(BUILDDIR)/$(var)/latex || exit;)
 101
 102endif # HAVE_PDFLATEX
 103
 104epubdocs:
 105        @$(srctree)/scripts/sphinx-pre-install --version-check
 106        @+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,epub,$(var),epub,$(var)))
 107
 108xmldocs:
 109        @$(srctree)/scripts/sphinx-pre-install --version-check
 110        @+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,xml,$(var),xml,$(var)))
 111
 112endif # HAVE_SPHINX
 113
 114# The following targets are independent of HAVE_SPHINX, and the rules should
 115# work or silently pass without Sphinx.
 116
 117refcheckdocs:
 118        $(Q)cd $(srctree);scripts/documentation-file-ref-check
 119
 120cleandocs:
 121        $(Q)rm -rf $(BUILDDIR)
 122        $(Q)$(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=Documentation/media clean
 123
 124dochelp:
 125        @echo  ' Linux kernel internal documentation in different formats from ReST:'
 126        @echo  '  htmldocs        - HTML'
 127        @echo  '  latexdocs       - LaTeX'
 128        @echo  '  pdfdocs         - PDF'
 129        @echo  '  epubdocs        - EPUB'
 130        @echo  '  xmldocs         - XML'
 131        @echo  '  linkcheckdocs   - check for broken external links (will connect to external hosts)'
 132        @echo  '  refcheckdocs    - check for references to non-existing files under Documentation'
 133        @echo  '  cleandocs       - clean all generated files'
 134        @echo
 135        @echo  '  make SPHINXDIRS="s1 s2" [target] Generate only docs of folder s1, s2'
 136        @echo  '  valid values for SPHINXDIRS are: $(_SPHINXDIRS)'
 137        @echo
 138        @echo  '  make SPHINX_CONF={conf-file} [target] use *additional* sphinx-build'
 139        @echo  '  configuration. This is e.g. useful to build with nit-picking config.'
 140        @echo
 141        @echo  '  Default location for the generated documents is Documentation/output'
 142