// SPDX-License-Identifier: GPL-2.0
/*
 *      linux/arch/alpha/kernel/sys_ruffian.c
 *
 *      Copyright (C) 1995 David A Rusling
 *      Copyright (C) 1996 Jay A Estabrook
 *      Copyright (C) 1998, 1999, 2000 Richard Henderson
 *
 * Code supporting the RUFFIAN.
 */

#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/timex.h>
#include <linux/init.h>

#include <asm/ptrace.h>
#include <asm/dma.h>
#include <asm/irq.h>
#include <asm/mmu_context.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/core_cia.h>
#include <asm/tlbflush.h>

#include "proto.h"
#include "irq_impl.h"
#include "pci_impl.h"
#include "machvec_impl.h"


static void __init
ruffian_init_irq(void)
{
        /* Invert 6&7 for i82371 */
        *(vulp)PYXIS_INT_HILO  = 0x000000c0UL; mb();
        *(vulp)PYXIS_INT_CNFG  = 0x00002064UL; mb();     /* all clear */

        outb(0x11,0xA0);
        outb(0x08,0xA1);
        outb(0x02,0xA1);
        outb(0x01,0xA1);
        outb(0xFF,0xA1);
        
        outb(0x11,0x20);
        outb(0x00,0x21);
        outb(0x04,0x21);
        outb(0x01,0x21);
        outb(0xFF,0x21);
        
        /* Finish writing the 82C59A PIC Operation Control Words */
        outb(0x20,0xA0);
        outb(0x20,0x20);
        
        init_i8259a_irqs();

        /* Not interested in the bogus interrupts (0,3,6),
           NMI (1), HALT (2), flash (5), or 21142 (8).  */
        init_pyxis_irqs(0x16f0000);

        common_init_isa_dma();
}

#define RUFFIAN_LATCH   DIV_ROUND_CLOSEST(PIT_TICK_RATE, HZ)

static void __init
ruffian_init_rtc(void)
{
        /* Ruffian does not have the RTC connected to the CPU timer
           interrupt.  Instead, it uses the PIT connected to IRQ 0.  */

        /* Setup interval timer.  */
        outb(0x34, 0x43);               /* binary, mode 2, LSB/MSB, ch 0 */
        outb(RUFFIAN_LATCH & 0xff, 0x40);       /* LSB */
        outb(RUFFIAN_LATCH >> 8, 0x40);         /* MSB */

        outb(0xb6, 0x43);               /* pit counter 2: speaker */
        outb(0x31, 0x42);
        outb(0x13, 0x42);

        setup_irq(0, &timer_irqaction);
}

static void
ruffian_kill_arch (int mode)
{
        cia_kill_arch(mode);
#if 0
        /* This only causes re-entry to ARCSBIOS */
        /* Perhaps this works for other PYXIS as well?  */
        *(vuip) PYXIS_RESET = 0x0000dead;
        mb();
#endif
}

/*
 *  Interrupt routing:
 *
 *              Primary bus
 *        IdSel         INTA    INTB    INTC    INTD
 * 21052   13             -       -       -       -
 * SIO     14            23       -       -       -
 * 21143   15            44       -       -       -
 * Slot 0  17            43      42      41      40
 *
 *              Secondary bus
 *        IdSel         INTA    INTB    INTC    INTD
 * Slot 0   8 (18)       19      18      17      16
 * Slot 1   9 (19)       31      30      29      28
 * Slot 2  10 (20)       27      26      25      24
 * Slot 3  11 (21)       39      38      37      36
 * Slot 4  12 (22)       35      34      33      32
 * 53c875  13 (23)       20       -       -       -
 *
 */

static int
ruffian_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
        static char irq_tab[11][5] = {
              /*INT  INTA INTB INTC INTD */
                {-1,  -1,  -1,  -1,  -1},  /* IdSel 13,  21052       */
                {-1,  -1,  -1,  -1,  -1},  /* IdSel 14,  SIO         */
                {44,  44,  44,  44,  44},  /* IdSel 15,  21143       */
                {-1,  -1,  -1,  -1,  -1},  /* IdSel 16,  none        */
                {43,  43,  42,  41,  40},  /* IdSel 17,  64-bit slot */
                /* the next 6 are actually on PCI bus 1, across the bridge */
                {19,  19,  18,  17,  16},  /* IdSel  8,  slot 0      */
                {31,  31,  30,  29,  28},  /* IdSel  9,  slot 1      */
                {27,  27,  26,  25,  24},  /* IdSel 10,  slot 2      */
                {39,  39,  38,  37,  36},  /* IdSel 11,  slot 3      */
                {35,  35,  34,  33,  32},  /* IdSel 12,  slot 4      */
                {20,  20,  20,  20,  20},  /* IdSel 13,  53c875      */
        };
        const long min_idsel = 13, max_idsel = 23, irqs_per_slot = 5;
        return COMMON_TABLE_LOOKUP;
}

static u8
ruffian_swizzle(struct pci_dev *dev, u8 *pinp)
{
        int slot, pin = *pinp;

        if (dev->bus->number == 0) {
                slot = PCI_SLOT(dev->devfn);
        }               
        /* Check for the built-in bridge.  */
        else if (PCI_SLOT(dev->bus->self->devfn) == 13) {
                slot = PCI_SLOT(dev->devfn) + 10;
        }
        else 
        {
                /* Must be a card-based bridge.  */
                do {
                        if (PCI_SLOT(dev->bus->self->devfn) == 13) {
                                slot = PCI_SLOT(dev->devfn) + 10;
                                break;
                        }
                        pin = pci_swizzle_interrupt_pin(dev, pin);

                        /* Move up the chain of bridges.  */
                        dev = dev->bus->self;
                        /* Slot of the next bridge.  */
                        slot = PCI_SLOT(dev->devfn);
                } while (dev->bus->self);
        }
        *pinp = pin;
        return slot;
}

#ifdef BUILDING_FOR_MILO
/*
 * The DeskStation Ruffian motherboard firmware does not place
 * the memory size in the PALimpure area.  Therefore, we use
 * the Bank Configuration Registers in PYXIS to obtain the size.
 */
static unsigned long __init
ruffian_get_bank_size(unsigned long offset)
{
        unsigned long bank_addr, bank, ret = 0;

        /* Valid offsets are: 0x800, 0x840 and 0x880
           since Ruffian only uses three banks.  */
        bank_addr = (unsigned long)PYXIS_MCR + offset;
        bank = *(vulp)bank_addr;

        /* Check BANK_ENABLE */
        if (bank & 0x01) {
                static unsigned long size[] __initdata = {
                        0x40000000UL, /* 0x00,   1G */
                        0x20000000UL, /* 0x02, 512M */
                        0x10000000UL, /* 0x04, 256M */
                        0x08000000UL, /* 0x06, 128M */
                        0x04000000UL, /* 0x08,  64M */
                        0x02000000UL, /* 0x0a,  32M */
                        0x01000000UL, /* 0x0c,  16M */
                        0x00800000UL, /* 0x0e,   8M */
                        0x80000000UL, /* 0x10,   2G */
                };

                bank = (bank & 0x1e) >> 1;
                if (bank < ARRAY_SIZE(size))
                        ret = size[bank];
        }

        return ret;
}
#endif /* BUILDING_FOR_MILO */

/*
 * The System Vector
 */

struct alpha_machine_vector ruffian_mv __initmv = {
        .vector_name            = "Ruffian",
        DO_EV5_MMU,
        DO_DEFAULT_RTC,
        DO_PYXIS_IO,
        .machine_check          = cia_machine_check,
        .max_isa_dma_address    = ALPHA_RUFFIAN_MAX_ISA_DMA_ADDRESS,
        .min_io_address         = DEFAULT_IO_BASE,
        .min_mem_address        = DEFAULT_MEM_BASE,
        .pci_dac_offset         = PYXIS_DAC_OFFSET,

        .nr_irqs                = 48,
        .device_interrupt       = pyxis_device_interrupt,

        .init_arch              = pyxis_init_arch,
        .init_irq               = ruffian_init_irq,
        .init_rtc               = ruffian_init_rtc,
        .init_pci               = cia_init_pci,
        .kill_arch              = ruffian_kill_arch,
        .pci_map_irq            = ruffian_map_irq,
        .pci_swizzle            = ruffian_swizzle,
};
ALIAS_MV(ruffian)