linux/arch/arm/common/sa1111.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-only
   2/*
   3 * linux/arch/arm/common/sa1111.c
   4 *
   5 * SA1111 support
   6 *
   7 * Original code by John Dorsey
   8 *
   9 * This file contains all generic SA1111 support.
  10 *
  11 * All initialization functions provided here are intended to be called
  12 * from machine specific code with proper arguments when required.
  13 */
  14#include <linux/module.h>
  15#include <linux/gpio/driver.h>
  16#include <linux/init.h>
  17#include <linux/irq.h>
  18#include <linux/kernel.h>
  19#include <linux/delay.h>
  20#include <linux/errno.h>
  21#include <linux/ioport.h>
  22#include <linux/platform_device.h>
  23#include <linux/slab.h>
  24#include <linux/spinlock.h>
  25#include <linux/dma-mapping.h>
  26#include <linux/clk.h>
  27#include <linux/io.h>
  28
  29#include <mach/hardware.h>
  30#include <asm/mach/irq.h>
  31#include <asm/mach-types.h>
  32#include <linux/sizes.h>
  33
  34#include <asm/hardware/sa1111.h>
  35
  36/* SA1111 IRQs */
  37#define IRQ_GPAIN0              (0)
  38#define IRQ_GPAIN1              (1)
  39#define IRQ_GPAIN2              (2)
  40#define IRQ_GPAIN3              (3)
  41#define IRQ_GPBIN0              (4)
  42#define IRQ_GPBIN1              (5)
  43#define IRQ_GPBIN2              (6)
  44#define IRQ_GPBIN3              (7)
  45#define IRQ_GPBIN4              (8)
  46#define IRQ_GPBIN5              (9)
  47#define IRQ_GPCIN0              (10)
  48#define IRQ_GPCIN1              (11)
  49#define IRQ_GPCIN2              (12)
  50#define IRQ_GPCIN3              (13)
  51#define IRQ_GPCIN4              (14)
  52#define IRQ_GPCIN5              (15)
  53#define IRQ_GPCIN6              (16)
  54#define IRQ_GPCIN7              (17)
  55#define IRQ_MSTXINT             (18)
  56#define IRQ_MSRXINT             (19)
  57#define IRQ_MSSTOPERRINT        (20)
  58#define IRQ_TPTXINT             (21)
  59#define IRQ_TPRXINT             (22)
  60#define IRQ_TPSTOPERRINT        (23)
  61#define SSPXMTINT               (24)
  62#define SSPRCVINT               (25)
  63#define SSPROR                  (26)
  64#define AUDXMTDMADONEA          (32)
  65#define AUDRCVDMADONEA          (33)
  66#define AUDXMTDMADONEB          (34)
  67#define AUDRCVDMADONEB          (35)
  68#define AUDTFSR                 (36)
  69#define AUDRFSR                 (37)
  70#define AUDTUR                  (38)
  71#define AUDROR                  (39)
  72#define AUDDTS                  (40)
  73#define AUDRDD                  (41)
  74#define AUDSTO                  (42)
  75#define IRQ_USBPWR              (43)
  76#define IRQ_HCIM                (44)
  77#define IRQ_HCIBUFFACC          (45)
  78#define IRQ_HCIRMTWKP           (46)
  79#define IRQ_NHCIMFCIR           (47)
  80#define IRQ_USB_PORT_RESUME     (48)
  81#define IRQ_S0_READY_NINT       (49)
  82#define IRQ_S1_READY_NINT       (50)
  83#define IRQ_S0_CD_VALID         (51)
  84#define IRQ_S1_CD_VALID         (52)
  85#define IRQ_S0_BVD1_STSCHG      (53)
  86#define IRQ_S1_BVD1_STSCHG      (54)
  87#define SA1111_IRQ_NR           (55)
  88
  89extern void sa1110_mb_enable(void);
  90extern void sa1110_mb_disable(void);
  91
  92/*
  93 * We keep the following data for the overall SA1111.  Note that the
  94 * struct device and struct resource are "fake"; they should be supplied
  95 * by the bus above us.  However, in the interests of getting all SA1111
  96 * drivers converted over to the device model, we provide this as an
  97 * anchor point for all the other drivers.
  98 */
  99struct sa1111 {
 100        struct device   *dev;
 101        struct clk      *clk;
 102        unsigned long   phys;
 103        int             irq;
 104        int             irq_base;       /* base for cascaded on-chip IRQs */
 105        spinlock_t      lock;
 106        void __iomem    *base;
 107        struct sa1111_platform_data *pdata;
 108        struct irq_domain *irqdomain;
 109        struct gpio_chip gc;
 110#ifdef CONFIG_PM
 111        void            *saved_state;
 112#endif
 113};
 114
 115/*
 116 * We _really_ need to eliminate this.  Its only users
 117 * are the PWM and DMA checking code.
 118 */
 119static struct sa1111 *g_sa1111;
 120
 121struct sa1111_dev_info {
 122        unsigned long   offset;
 123        unsigned long   skpcr_mask;
 124        bool            dma;
 125        unsigned int    devid;
 126        unsigned int    hwirq[6];
 127};
 128
 129static struct sa1111_dev_info sa1111_devices[] = {
 130        {
 131                .offset         = SA1111_USB,
 132                .skpcr_mask     = SKPCR_UCLKEN,
 133                .dma            = true,
 134                .devid          = SA1111_DEVID_USB,
 135                .hwirq = {
 136                        IRQ_USBPWR,
 137                        IRQ_HCIM,
 138                        IRQ_HCIBUFFACC,
 139                        IRQ_HCIRMTWKP,
 140                        IRQ_NHCIMFCIR,
 141                        IRQ_USB_PORT_RESUME
 142                },
 143        },
 144        {
 145                .offset         = 0x0600,
 146                .skpcr_mask     = SKPCR_I2SCLKEN | SKPCR_L3CLKEN,
 147                .dma            = true,
 148                .devid          = SA1111_DEVID_SAC,
 149                .hwirq = {
 150                        AUDXMTDMADONEA,
 151                        AUDXMTDMADONEB,
 152                        AUDRCVDMADONEA,
 153                        AUDRCVDMADONEB
 154                },
 155        },
 156        {
 157                .offset         = 0x0800,
 158                .skpcr_mask     = SKPCR_SCLKEN,
 159                .devid          = SA1111_DEVID_SSP,
 160        },
 161        {
 162                .offset         = SA1111_KBD,
 163                .skpcr_mask     = SKPCR_PTCLKEN,
 164                .devid          = SA1111_DEVID_PS2_KBD,
 165                .hwirq = {
 166                        IRQ_TPRXINT,
 167                        IRQ_TPTXINT
 168                },
 169        },
 170        {
 171                .offset         = SA1111_MSE,
 172                .skpcr_mask     = SKPCR_PMCLKEN,
 173                .devid          = SA1111_DEVID_PS2_MSE,
 174                .hwirq = {
 175                        IRQ_MSRXINT,
 176                        IRQ_MSTXINT
 177                },
 178        },
 179        {
 180                .offset         = 0x1800,
 181                .skpcr_mask     = 0,
 182                .devid          = SA1111_DEVID_PCMCIA,
 183                .hwirq = {
 184                        IRQ_S0_READY_NINT,
 185                        IRQ_S0_CD_VALID,
 186                        IRQ_S0_BVD1_STSCHG,
 187                        IRQ_S1_READY_NINT,
 188                        IRQ_S1_CD_VALID,
 189                        IRQ_S1_BVD1_STSCHG,
 190                },
 191        },
 192};
 193
 194static int sa1111_map_irq(struct sa1111 *sachip, irq_hw_number_t hwirq)
 195{
 196        return irq_create_mapping(sachip->irqdomain, hwirq);
 197}
 198
 199static void sa1111_handle_irqdomain(struct irq_domain *irqdomain, int irq)
 200{
 201        struct irq_desc *d = irq_to_desc(irq_linear_revmap(irqdomain, irq));
 202
 203        if (d)
 204                generic_handle_irq_desc(d);
 205}
 206
 207/*
 208 * SA1111 interrupt support.  Since clearing an IRQ while there are
 209 * active IRQs causes the interrupt output to pulse, the upper levels
 210 * will call us again if there are more interrupts to process.
 211 */
 212static void sa1111_irq_handler(struct irq_desc *desc)
 213{
 214        unsigned int stat0, stat1, i;
 215        struct sa1111 *sachip = irq_desc_get_handler_data(desc);
 216        struct irq_domain *irqdomain;
 217        void __iomem *mapbase = sachip->base + SA1111_INTC;
 218
 219        stat0 = readl_relaxed(mapbase + SA1111_INTSTATCLR0);
 220        stat1 = readl_relaxed(mapbase + SA1111_INTSTATCLR1);
 221
 222        writel_relaxed(stat0, mapbase + SA1111_INTSTATCLR0);
 223
 224        desc->irq_data.chip->irq_ack(&desc->irq_data);
 225
 226        writel_relaxed(stat1, mapbase + SA1111_INTSTATCLR1);
 227
 228        if (stat0 == 0 && stat1 == 0) {
 229                do_bad_IRQ(desc);
 230                return;
 231        }
 232
 233        irqdomain = sachip->irqdomain;
 234
 235        for (i = 0; stat0; i++, stat0 >>= 1)
 236                if (stat0 & 1)
 237                        sa1111_handle_irqdomain(irqdomain, i);
 238
 239        for (i = 32; stat1; i++, stat1 >>= 1)
 240                if (stat1 & 1)
 241                        sa1111_handle_irqdomain(irqdomain, i);
 242
 243        /* For level-based interrupts */
 244        desc->irq_data.chip->irq_unmask(&desc->irq_data);
 245}
 246
 247static u32 sa1111_irqmask(struct irq_data *d)
 248{
 249        return BIT(irqd_to_hwirq(d) & 31);
 250}
 251
 252static int sa1111_irqbank(struct irq_data *d)
 253{
 254        return (irqd_to_hwirq(d) / 32) * 4;
 255}
 256
 257static void sa1111_ack_irq(struct irq_data *d)
 258{
 259}
 260
 261static void sa1111_mask_irq(struct irq_data *d)
 262{
 263        struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
 264        void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
 265        u32 ie;
 266
 267        ie = readl_relaxed(mapbase + SA1111_INTEN0);
 268        ie &= ~sa1111_irqmask(d);
 269        writel(ie, mapbase + SA1111_INTEN0);
 270}
 271
 272static void sa1111_unmask_irq(struct irq_data *d)
 273{
 274        struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
 275        void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
 276        u32 ie;
 277
 278        ie = readl_relaxed(mapbase + SA1111_INTEN0);
 279        ie |= sa1111_irqmask(d);
 280        writel_relaxed(ie, mapbase + SA1111_INTEN0);
 281}
 282
 283/*
 284 * Attempt to re-trigger the interrupt.  The SA1111 contains a register
 285 * (INTSET) which claims to do this.  However, in practice no amount of
 286 * manipulation of INTEN and INTSET guarantees that the interrupt will
 287 * be triggered.  In fact, its very difficult, if not impossible to get
 288 * INTSET to re-trigger the interrupt.
 289 */
 290static int sa1111_retrigger_irq(struct irq_data *d)
 291{
 292        struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
 293        void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
 294        u32 ip, mask = sa1111_irqmask(d);
 295        int i;
 296
 297        ip = readl_relaxed(mapbase + SA1111_INTPOL0);
 298        for (i = 0; i < 8; i++) {
 299                writel_relaxed(ip ^ mask, mapbase + SA1111_INTPOL0);
 300                writel_relaxed(ip, mapbase + SA1111_INTPOL0);
 301                if (readl_relaxed(mapbase + SA1111_INTSTATCLR0) & mask)
 302                        break;
 303        }
 304
 305        if (i == 8)
 306                pr_err("Danger Will Robinson: failed to re-trigger IRQ%d\n",
 307                       d->irq);
 308        return i == 8 ? -1 : 0;
 309}
 310
 311static int sa1111_type_irq(struct irq_data *d, unsigned int flags)
 312{
 313        struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
 314        void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
 315        u32 ip, mask = sa1111_irqmask(d);
 316
 317        if (flags == IRQ_TYPE_PROBE)
 318                return 0;
 319
 320        if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0)
 321                return -EINVAL;
 322
 323        ip = readl_relaxed(mapbase + SA1111_INTPOL0);
 324        if (flags & IRQ_TYPE_EDGE_RISING)
 325                ip &= ~mask;
 326        else
 327                ip |= mask;
 328        writel_relaxed(ip, mapbase + SA1111_INTPOL0);
 329        writel_relaxed(ip, mapbase + SA1111_WAKEPOL0);
 330
 331        return 0;
 332}
 333
 334static int sa1111_wake_irq(struct irq_data *d, unsigned int on)
 335{
 336        struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
 337        void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
 338        u32 we, mask = sa1111_irqmask(d);
 339
 340        we = readl_relaxed(mapbase + SA1111_WAKEEN0);
 341        if (on)
 342                we |= mask;
 343        else
 344                we &= ~mask;
 345        writel_relaxed(we, mapbase + SA1111_WAKEEN0);
 346
 347        return 0;
 348}
 349
 350static struct irq_chip sa1111_irq_chip = {
 351        .name           = "SA1111",
 352        .irq_ack        = sa1111_ack_irq,
 353        .irq_mask       = sa1111_mask_irq,
 354        .irq_unmask     = sa1111_unmask_irq,
 355        .irq_retrigger  = sa1111_retrigger_irq,
 356        .irq_set_type   = sa1111_type_irq,
 357        .irq_set_wake   = sa1111_wake_irq,
 358};
 359
 360static int sa1111_irqdomain_map(struct irq_domain *d, unsigned int irq,
 361        irq_hw_number_t hwirq)
 362{
 363        struct sa1111 *sachip = d->host_data;
 364
 365        /* Disallow unavailable interrupts */
 366        if (hwirq > SSPROR && hwirq < AUDXMTDMADONEA)
 367                return -EINVAL;
 368
 369        irq_set_chip_data(irq, sachip);
 370        irq_set_chip_and_handler(irq, &sa1111_irq_chip, handle_edge_irq);
 371        irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
 372
 373        return 0;
 374}
 375
 376static const struct irq_domain_ops sa1111_irqdomain_ops = {
 377        .map = sa1111_irqdomain_map,
 378        .xlate = irq_domain_xlate_twocell,
 379};
 380
 381static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base)
 382{
 383        void __iomem *irqbase = sachip->base + SA1111_INTC;
 384        int ret;
 385
 386        /*
 387         * We're guaranteed that this region hasn't been taken.
 388         */
 389        request_mem_region(sachip->phys + SA1111_INTC, 512, "irq");
 390
 391        ret = irq_alloc_descs(-1, irq_base, SA1111_IRQ_NR, -1);
 392        if (ret <= 0) {
 393                dev_err(sachip->dev, "unable to allocate %u irqs: %d\n",
 394                        SA1111_IRQ_NR, ret);
 395                if (ret == 0)
 396                        ret = -EINVAL;
 397                return ret;
 398        }
 399
 400        sachip->irq_base = ret;
 401
 402        /* disable all IRQs */
 403        writel_relaxed(0, irqbase + SA1111_INTEN0);
 404        writel_relaxed(0, irqbase + SA1111_INTEN1);
 405        writel_relaxed(0, irqbase + SA1111_WAKEEN0);
 406        writel_relaxed(0, irqbase + SA1111_WAKEEN1);
 407
 408        /*
 409         * detect on rising edge.  Note: Feb 2001 Errata for SA1111
 410         * specifies that S0ReadyInt and S1ReadyInt should be '1'.
 411         */
 412        writel_relaxed(0, irqbase + SA1111_INTPOL0);
 413        writel_relaxed(BIT(IRQ_S0_READY_NINT & 31) |
 414                       BIT(IRQ_S1_READY_NINT & 31),
 415                       irqbase + SA1111_INTPOL1);
 416
 417        /* clear all IRQs */
 418        writel_relaxed(~0, irqbase + SA1111_INTSTATCLR0);
 419        writel_relaxed(~0, irqbase + SA1111_INTSTATCLR1);
 420
 421        sachip->irqdomain = irq_domain_add_linear(NULL, SA1111_IRQ_NR,
 422                                                  &sa1111_irqdomain_ops,
 423                                                  sachip);
 424        if (!sachip->irqdomain) {
 425                irq_free_descs(sachip->irq_base, SA1111_IRQ_NR);
 426                return -ENOMEM;
 427        }
 428
 429        irq_domain_associate_many(sachip->irqdomain,
 430                                  sachip->irq_base + IRQ_GPAIN0,
 431                                  IRQ_GPAIN0, SSPROR + 1 - IRQ_GPAIN0);
 432        irq_domain_associate_many(sachip->irqdomain,
 433                                  sachip->irq_base + AUDXMTDMADONEA,
 434                                  AUDXMTDMADONEA,
 435                                  IRQ_S1_BVD1_STSCHG + 1 - AUDXMTDMADONEA);
 436
 437        /*
 438         * Register SA1111 interrupt
 439         */
 440        irq_set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING);
 441        irq_set_chained_handler_and_data(sachip->irq, sa1111_irq_handler,
 442                                         sachip);
 443
 444        dev_info(sachip->dev, "Providing IRQ%u-%u\n",
 445                sachip->irq_base, sachip->irq_base + SA1111_IRQ_NR - 1);
 446
 447        return 0;
 448}
 449
 450static void sa1111_remove_irq(struct sa1111 *sachip)
 451{
 452        struct irq_domain *domain = sachip->irqdomain;
 453        void __iomem *irqbase = sachip->base + SA1111_INTC;
 454        int i;
 455
 456        /* disable all IRQs */
 457        writel_relaxed(0, irqbase + SA1111_INTEN0);
 458        writel_relaxed(0, irqbase + SA1111_INTEN1);
 459        writel_relaxed(0, irqbase + SA1111_WAKEEN0);
 460        writel_relaxed(0, irqbase + SA1111_WAKEEN1);
 461
 462        irq_set_chained_handler_and_data(sachip->irq, NULL, NULL);
 463        for (i = 0; i < SA1111_IRQ_NR; i++)
 464                irq_dispose_mapping(irq_find_mapping(domain, i));
 465        irq_domain_remove(domain);
 466
 467        release_mem_region(sachip->phys + SA1111_INTC, 512);
 468}
 469
 470enum {
 471        SA1111_GPIO_PXDDR = (SA1111_GPIO_PADDR - SA1111_GPIO_PADDR),
 472        SA1111_GPIO_PXDRR = (SA1111_GPIO_PADRR - SA1111_GPIO_PADDR),
 473        SA1111_GPIO_PXDWR = (SA1111_GPIO_PADWR - SA1111_GPIO_PADDR),
 474        SA1111_GPIO_PXSDR = (SA1111_GPIO_PASDR - SA1111_GPIO_PADDR),
 475        SA1111_GPIO_PXSSR = (SA1111_GPIO_PASSR - SA1111_GPIO_PADDR),
 476};
 477
 478static struct sa1111 *gc_to_sa1111(struct gpio_chip *gc)
 479{
 480        return container_of(gc, struct sa1111, gc);
 481}
 482
 483static void __iomem *sa1111_gpio_map_reg(struct sa1111 *sachip, unsigned offset)
 484{
 485        void __iomem *reg = sachip->base + SA1111_GPIO;
 486
 487        if (offset < 4)
 488                return reg + SA1111_GPIO_PADDR;
 489        if (offset < 10)
 490                return reg + SA1111_GPIO_PBDDR;
 491        if (offset < 18)
 492                return reg + SA1111_GPIO_PCDDR;
 493        return NULL;
 494}
 495
 496static u32 sa1111_gpio_map_bit(unsigned offset)
 497{
 498        if (offset < 4)
 499                return BIT(offset);
 500        if (offset < 10)
 501                return BIT(offset - 4);
 502        if (offset < 18)
 503                return BIT(offset - 10);
 504        return 0;
 505}
 506
 507static void sa1111_gpio_modify(void __iomem *reg, u32 mask, u32 set)
 508{
 509        u32 val;
 510
 511        val = readl_relaxed(reg);
 512        val &= ~mask;
 513        val |= mask & set;
 514        writel_relaxed(val, reg);
 515}
 516
 517static int sa1111_gpio_get_direction(struct gpio_chip *gc, unsigned offset)
 518{
 519        struct sa1111 *sachip = gc_to_sa1111(gc);
 520        void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
 521        u32 mask = sa1111_gpio_map_bit(offset);
 522
 523        return !!(readl_relaxed(reg + SA1111_GPIO_PXDDR) & mask);
 524}
 525
 526static int sa1111_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
 527{
 528        struct sa1111 *sachip = gc_to_sa1111(gc);
 529        unsigned long flags;
 530        void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
 531        u32 mask = sa1111_gpio_map_bit(offset);
 532
 533        spin_lock_irqsave(&sachip->lock, flags);
 534        sa1111_gpio_modify(reg + SA1111_GPIO_PXDDR, mask, mask);
 535        sa1111_gpio_modify(reg + SA1111_GPIO_PXSDR, mask, mask);
 536        spin_unlock_irqrestore(&sachip->lock, flags);
 537
 538        return 0;
 539}
 540
 541static int sa1111_gpio_direction_output(struct gpio_chip *gc, unsigned offset,
 542        int value)
 543{
 544        struct sa1111 *sachip = gc_to_sa1111(gc);
 545        unsigned long flags;
 546        void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
 547        u32 mask = sa1111_gpio_map_bit(offset);
 548
 549        spin_lock_irqsave(&sachip->lock, flags);
 550        sa1111_gpio_modify(reg + SA1111_GPIO_PXDWR, mask, value ? mask : 0);
 551        sa1111_gpio_modify(reg + SA1111_GPIO_PXSSR, mask, value ? mask : 0);
 552        sa1111_gpio_modify(reg + SA1111_GPIO_PXDDR, mask, 0);
 553        sa1111_gpio_modify(reg + SA1111_GPIO_PXSDR, mask, 0);
 554        spin_unlock_irqrestore(&sachip->lock, flags);
 555
 556        return 0;
 557}
 558
 559static int sa1111_gpio_get(struct gpio_chip *gc, unsigned offset)
 560{
 561        struct sa1111 *sachip = gc_to_sa1111(gc);
 562        void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
 563        u32 mask = sa1111_gpio_map_bit(offset);
 564
 565        return !!(readl_relaxed(reg + SA1111_GPIO_PXDRR) & mask);
 566}
 567
 568static void sa1111_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
 569{
 570        struct sa1111 *sachip = gc_to_sa1111(gc);
 571        unsigned long flags;
 572        void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
 573        u32 mask = sa1111_gpio_map_bit(offset);
 574
 575        spin_lock_irqsave(&sachip->lock, flags);
 576        sa1111_gpio_modify(reg + SA1111_GPIO_PXDWR, mask, value ? mask : 0);
 577        sa1111_gpio_modify(reg + SA1111_GPIO_PXSSR, mask, value ? mask : 0);
 578        spin_unlock_irqrestore(&sachip->lock, flags);
 579}
 580
 581static void sa1111_gpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
 582        unsigned long *bits)
 583{
 584        struct sa1111 *sachip = gc_to_sa1111(gc);
 585        unsigned long flags;
 586        void __iomem *reg = sachip->base + SA1111_GPIO;
 587        u32 msk, val;
 588
 589        msk = *mask;
 590        val = *bits;
 591
 592        spin_lock_irqsave(&sachip->lock, flags);
 593        sa1111_gpio_modify(reg + SA1111_GPIO_PADWR, msk & 15, val);
 594        sa1111_gpio_modify(reg + SA1111_GPIO_PASSR, msk & 15, val);
 595        sa1111_gpio_modify(reg + SA1111_GPIO_PBDWR, (msk >> 4) & 255, val >> 4);
 596        sa1111_gpio_modify(reg + SA1111_GPIO_PBSSR, (msk >> 4) & 255, val >> 4);
 597        sa1111_gpio_modify(reg + SA1111_GPIO_PCDWR, (msk >> 12) & 255, val >> 12);
 598        sa1111_gpio_modify(reg + SA1111_GPIO_PCSSR, (msk >> 12) & 255, val >> 12);
 599        spin_unlock_irqrestore(&sachip->lock, flags);
 600}
 601
 602static int sa1111_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
 603{
 604        struct sa1111 *sachip = gc_to_sa1111(gc);
 605
 606        return sa1111_map_irq(sachip, offset);
 607}
 608
 609static int sa1111_setup_gpios(struct sa1111 *sachip)
 610{
 611        sachip->gc.label = "sa1111";
 612        sachip->gc.parent = sachip->dev;
 613        sachip->gc.owner = THIS_MODULE;
 614        sachip->gc.get_direction = sa1111_gpio_get_direction;
 615        sachip->gc.direction_input = sa1111_gpio_direction_input;
 616        sachip->gc.direction_output = sa1111_gpio_direction_output;
 617        sachip->gc.get = sa1111_gpio_get;
 618        sachip->gc.set = sa1111_gpio_set;
 619        sachip->gc.set_multiple = sa1111_gpio_set_multiple;
 620        sachip->gc.to_irq = sa1111_gpio_to_irq;
 621        sachip->gc.base = -1;
 622        sachip->gc.ngpio = 18;
 623
 624        return devm_gpiochip_add_data(sachip->dev, &sachip->gc, sachip);
 625}
 626
 627/*
 628 * Bring the SA1111 out of reset.  This requires a set procedure:
 629 *  1. nRESET asserted (by hardware)
 630 *  2. CLK turned on from SA1110
 631 *  3. nRESET deasserted
 632 *  4. VCO turned on, PLL_BYPASS turned off
 633 *  5. Wait lock time, then assert RCLKEn
 634 *  7. PCR set to allow clocking of individual functions
 635 *
 636 * Until we've done this, the only registers we can access are:
 637 *   SBI_SKCR
 638 *   SBI_SMCR
 639 *   SBI_SKID
 640 */
 641static void sa1111_wake(struct sa1111 *sachip)
 642{
 643        unsigned long flags, r;
 644
 645        spin_lock_irqsave(&sachip->lock, flags);
 646
 647        clk_enable(sachip->clk);
 648
 649        /*
 650         * Turn VCO on, and disable PLL Bypass.
 651         */
 652        r = readl_relaxed(sachip->base + SA1111_SKCR);
 653        r &= ~SKCR_VCO_OFF;
 654        writel_relaxed(r, sachip->base + SA1111_SKCR);
 655        r |= SKCR_PLL_BYPASS | SKCR_OE_EN;
 656        writel_relaxed(r, sachip->base + SA1111_SKCR);
 657
 658        /*
 659         * Wait lock time.  SA1111 manual _doesn't_
 660         * specify a figure for this!  We choose 100us.
 661         */
 662        udelay(100);
 663
 664        /*
 665         * Enable RCLK.  We also ensure that RDYEN is set.
 666         */
 667        r |= SKCR_RCLKEN | SKCR_RDYEN;
 668        writel_relaxed(r, sachip->base + SA1111_SKCR);
 669
 670        /*
 671         * Wait 14 RCLK cycles for the chip to finish coming out
 672         * of reset. (RCLK=24MHz).  This is 590ns.
 673         */
 674        udelay(1);
 675
 676        /*
 677         * Ensure all clocks are initially off.
 678         */
 679        writel_relaxed(0, sachip->base + SA1111_SKPCR);
 680
 681        spin_unlock_irqrestore(&sachip->lock, flags);
 682}
 683
 684#ifdef CONFIG_ARCH_SA1100
 685
 686static u32 sa1111_dma_mask[] = {
 687        ~0,
 688        ~(1 << 20),
 689        ~(1 << 23),
 690        ~(1 << 24),
 691        ~(1 << 25),
 692        ~(1 << 20),
 693        ~(1 << 20),
 694        0,
 695};
 696
 697/*
 698 * Configure the SA1111 shared memory controller.
 699 */
 700void
 701sa1111_configure_smc(struct sa1111 *sachip, int sdram, unsigned int drac,
 702                     unsigned int cas_latency)
 703{
 704        unsigned int smcr = SMCR_DTIM | SMCR_MBGE | FInsrt(drac, SMCR_DRAC);
 705
 706        if (cas_latency == 3)
 707                smcr |= SMCR_CLAT;
 708
 709        writel_relaxed(smcr, sachip->base + SA1111_SMCR);
 710
 711        /*
 712         * Now clear the bits in the DMA mask to work around the SA1111
 713         * DMA erratum (Intel StrongARM SA-1111 Microprocessor Companion
 714         * Chip Specification Update, June 2000, Erratum #7).
 715         */
 716        if (sachip->dev->dma_mask)
 717                *sachip->dev->dma_mask &= sa1111_dma_mask[drac >> 2];
 718
 719        sachip->dev->coherent_dma_mask &= sa1111_dma_mask[drac >> 2];
 720}
 721#endif
 722
 723static void sa1111_dev_release(struct device *_dev)
 724{
 725        struct sa1111_dev *dev = to_sa1111_device(_dev);
 726
 727        kfree(dev);
 728}
 729
 730static int
 731sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
 732                      struct sa1111_dev_info *info)
 733{
 734        struct sa1111_dev *dev;
 735        unsigned i;
 736        int ret;
 737
 738        dev = kzalloc(sizeof(struct sa1111_dev), GFP_KERNEL);
 739        if (!dev) {
 740                ret = -ENOMEM;
 741                goto err_alloc;
 742        }
 743
 744        device_initialize(&dev->dev);
 745        dev_set_name(&dev->dev, "%4.4lx", info->offset);
 746        dev->devid       = info->devid;
 747        dev->dev.parent  = sachip->dev;
 748        dev->dev.bus     = &sa1111_bus_type;
 749        dev->dev.release = sa1111_dev_release;
 750        dev->res.start   = sachip->phys + info->offset;
 751        dev->res.end     = dev->res.start + 511;
 752        dev->res.name    = dev_name(&dev->dev);
 753        dev->res.flags   = IORESOURCE_MEM;
 754        dev->mapbase     = sachip->base + info->offset;
 755        dev->skpcr_mask  = info->skpcr_mask;
 756
 757        for (i = 0; i < ARRAY_SIZE(info->hwirq); i++)
 758                dev->hwirq[i] = info->hwirq[i];
 759
 760        /*
 761         * If the parent device has a DMA mask associated with it, and
 762         * this child supports DMA, propagate it down to the children.
 763         */
 764        if (info->dma && sachip->dev->dma_mask) {
 765                dev->dma_mask = *sachip->dev->dma_mask;
 766                dev->dev.dma_mask = &dev->dma_mask;
 767                dev->dev.coherent_dma_mask = sachip->dev->coherent_dma_mask;
 768        }
 769
 770        ret = request_resource(parent, &dev->res);
 771        if (ret) {
 772                dev_err(sachip->dev, "failed to allocate resource for %s\n",
 773                        dev->res.name);
 774                goto err_resource;
 775        }
 776
 777        ret = device_add(&dev->dev);
 778        if (ret)
 779                goto err_add;
 780        return 0;
 781
 782 err_add:
 783        release_resource(&dev->res);
 784 err_resource:
 785        put_device(&dev->dev);
 786 err_alloc:
 787        return ret;
 788}
 789
 790/**
 791 *      sa1111_probe - probe for a single SA1111 chip.
 792 *      @phys_addr: physical address of device.
 793 *
 794 *      Probe for a SA1111 chip.  This must be called
 795 *      before any other SA1111-specific code.
 796 *
 797 *      Returns:
 798 *      %-ENODEV        device not found.
 799 *      %-EBUSY         physical address already marked in-use.
 800 *      %-EINVAL        no platform data passed
 801 *      %0              successful.
 802 */
 803static int __sa1111_probe(struct device *me, struct resource *mem, int irq)
 804{
 805        struct sa1111_platform_data *pd = me->platform_data;
 806        struct sa1111 *sachip;
 807        unsigned long id;
 808        unsigned int has_devs;
 809        int i, ret = -ENODEV;
 810
 811        if (!pd)
 812                return -EINVAL;
 813
 814        sachip = devm_kzalloc(me, sizeof(struct sa1111), GFP_KERNEL);
 815        if (!sachip)
 816                return -ENOMEM;
 817
 818        sachip->clk = devm_clk_get(me, "SA1111_CLK");
 819        if (IS_ERR(sachip->clk))
 820                return PTR_ERR(sachip->clk);
 821
 822        ret = clk_prepare(sachip->clk);
 823        if (ret)
 824                return ret;
 825
 826        spin_lock_init(&sachip->lock);
 827
 828        sachip->dev = me;
 829        dev_set_drvdata(sachip->dev, sachip);
 830
 831        sachip->pdata = pd;
 832        sachip->phys = mem->start;
 833        sachip->irq = irq;
 834
 835        /*
 836         * Map the whole region.  This also maps the
 837         * registers for our children.
 838         */
 839        sachip->base = ioremap(mem->start, PAGE_SIZE * 2);
 840        if (!sachip->base) {
 841                ret = -ENOMEM;
 842                goto err_clk_unprep;
 843        }
 844
 845        /*
 846         * Probe for the chip.  Only touch the SBI registers.
 847         */
 848        id = readl_relaxed(sachip->base + SA1111_SKID);
 849        if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
 850                printk(KERN_DEBUG "SA1111 not detected: ID = %08lx\n", id);
 851                ret = -ENODEV;
 852                goto err_unmap;
 853        }
 854
 855        pr_info("SA1111 Microprocessor Companion Chip: silicon revision %lx, metal revision %lx\n",
 856                (id & SKID_SIREV_MASK) >> 4, id & SKID_MTREV_MASK);
 857
 858        /*
 859         * We found it.  Wake the chip up, and initialise.
 860         */
 861        sa1111_wake(sachip);
 862
 863        /*
 864         * The interrupt controller must be initialised before any
 865         * other device to ensure that the interrupts are available.
 866         */
 867        ret = sa1111_setup_irq(sachip, pd->irq_base);
 868        if (ret)
 869                goto err_clk;
 870
 871        /* Setup the GPIOs - should really be done after the IRQ setup */
 872        ret = sa1111_setup_gpios(sachip);
 873        if (ret)
 874                goto err_irq;
 875
 876#ifdef CONFIG_ARCH_SA1100
 877        {
 878        unsigned int val;
 879
 880        /*
 881         * The SDRAM configuration of the SA1110 and the SA1111 must
 882         * match.  This is very important to ensure that SA1111 accesses
 883         * don't corrupt the SDRAM.  Note that this ungates the SA1111's
 884         * MBGNT signal, so we must have called sa1110_mb_disable()
 885         * beforehand.
 886         */
 887        sa1111_configure_smc(sachip, 1,
 888                             FExtr(MDCNFG, MDCNFG_SA1110_DRAC0),
 889                             FExtr(MDCNFG, MDCNFG_SA1110_TDL0));
 890
 891        /*
 892         * We only need to turn on DCLK whenever we want to use the
 893         * DMA.  It can otherwise be held firmly in the off position.
 894         * (currently, we always enable it.)
 895         */
 896        val = readl_relaxed(sachip->base + SA1111_SKPCR);
 897        writel_relaxed(val | SKPCR_DCLKEN, sachip->base + SA1111_SKPCR);
 898
 899        /*
 900         * Enable the SA1110 memory bus request and grant signals.
 901         */
 902        sa1110_mb_enable();
 903        }
 904#endif
 905
 906        g_sa1111 = sachip;
 907
 908        has_devs = ~0;
 909        if (pd)
 910                has_devs &= ~pd->disable_devs;
 911
 912        for (i = 0; i < ARRAY_SIZE(sa1111_devices); i++)
 913                if (sa1111_devices[i].devid & has_devs)
 914                        sa1111_init_one_child(sachip, mem, &sa1111_devices[i]);
 915
 916        return 0;
 917
 918 err_irq:
 919        sa1111_remove_irq(sachip);
 920 err_clk:
 921        clk_disable(sachip->clk);
 922 err_unmap:
 923        iounmap(sachip->base);
 924 err_clk_unprep:
 925        clk_unprepare(sachip->clk);
 926        return ret;
 927}
 928
 929static int sa1111_remove_one(struct device *dev, void *data)
 930{
 931        struct sa1111_dev *sadev = to_sa1111_device(dev);
 932        if (dev->bus != &sa1111_bus_type)
 933                return 0;
 934        device_del(&sadev->dev);
 935        release_resource(&sadev->res);
 936        put_device(&sadev->dev);
 937        return 0;
 938}
 939
 940static void __sa1111_remove(struct sa1111 *sachip)
 941{
 942        device_for_each_child(sachip->dev, NULL, sa1111_remove_one);
 943
 944        sa1111_remove_irq(sachip);
 945
 946        clk_disable(sachip->clk);
 947        clk_unprepare(sachip->clk);
 948
 949        iounmap(sachip->base);
 950}
 951
 952struct sa1111_save_data {
 953        unsigned int    skcr;
 954        unsigned int    skpcr;
 955        unsigned int    skcdr;
 956        unsigned char   skaud;
 957        unsigned char   skpwm0;
 958        unsigned char   skpwm1;
 959
 960        /*
 961         * Interrupt controller
 962         */
 963        unsigned int    intpol0;
 964        unsigned int    intpol1;
 965        unsigned int    inten0;
 966        unsigned int    inten1;
 967        unsigned int    wakepol0;
 968        unsigned int    wakepol1;
 969        unsigned int    wakeen0;
 970        unsigned int    wakeen1;
 971};
 972
 973#ifdef CONFIG_PM
 974
 975static int sa1111_suspend_noirq(struct device *dev)
 976{
 977        struct sa1111 *sachip = dev_get_drvdata(dev);
 978        struct sa1111_save_data *save;
 979        unsigned long flags;
 980        unsigned int val;
 981        void __iomem *base;
 982
 983        save = kmalloc(sizeof(struct sa1111_save_data), GFP_KERNEL);
 984        if (!save)
 985                return -ENOMEM;
 986        sachip->saved_state = save;
 987
 988        spin_lock_irqsave(&sachip->lock, flags);
 989
 990        /*
 991         * Save state.
 992         */
 993        base = sachip->base;
 994        save->skcr     = readl_relaxed(base + SA1111_SKCR);
 995        save->skpcr    = readl_relaxed(base + SA1111_SKPCR);
 996        save->skcdr    = readl_relaxed(base + SA1111_SKCDR);
 997        save->skaud    = readl_relaxed(base + SA1111_SKAUD);
 998        save->skpwm0   = readl_relaxed(base + SA1111_SKPWM0);
 999        save->skpwm1   = readl_relaxed(base + SA1111_SKPWM1);
1000
1001        writel_relaxed(0, sachip->base + SA1111_SKPWM0);
1002        writel_relaxed(0, sachip->base + SA1111_SKPWM1);
1003
1004        base = sachip->base + SA1111_INTC;
1005        save->intpol0  = readl_relaxed(base + SA1111_INTPOL0);
1006        save->intpol1  = readl_relaxed(base + SA1111_INTPOL1);
1007        save->inten0   = readl_relaxed(base + SA1111_INTEN0);
1008        save->inten1   = readl_relaxed(base + SA1111_INTEN1);
1009        save->wakepol0 = readl_relaxed(base + SA1111_WAKEPOL0);
1010        save->wakepol1 = readl_relaxed(base + SA1111_WAKEPOL1);
1011        save->wakeen0  = readl_relaxed(base + SA1111_WAKEEN0);
1012        save->wakeen1  = readl_relaxed(base + SA1111_WAKEEN1);
1013
1014        /*
1015         * Disable.
1016         */
1017        val = readl_relaxed(sachip->base + SA1111_SKCR);
1018        writel_relaxed(val | SKCR_SLEEP, sachip->base + SA1111_SKCR);
1019
1020        clk_disable(sachip->clk);
1021
1022        spin_unlock_irqrestore(&sachip->lock, flags);
1023
1024#ifdef CONFIG_ARCH_SA1100
1025        sa1110_mb_disable();
1026#endif
1027
1028        return 0;
1029}
1030
1031/*
1032 *      sa1111_resume - Restore the SA1111 device state.
1033 *      @dev: device to restore
1034 *
1035 *      Restore the general state of the SA1111; clock control and
1036 *      interrupt controller.  Other parts of the SA1111 must be
1037 *      restored by their respective drivers, and must be called
1038 *      via LDM after this function.
1039 */
1040static int sa1111_resume_noirq(struct device *dev)
1041{
1042        struct sa1111 *sachip = dev_get_drvdata(dev);
1043        struct sa1111_save_data *save;
1044        unsigned long flags, id;
1045        void __iomem *base;
1046
1047        save = sachip->saved_state;
1048        if (!save)
1049                return 0;
1050
1051        /*
1052         * Ensure that the SA1111 is still here.
1053         * FIXME: shouldn't do this here.
1054         */
1055        id = readl_relaxed(sachip->base + SA1111_SKID);
1056        if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
1057                __sa1111_remove(sachip);
1058                dev_set_drvdata(dev, NULL);
1059                kfree(save);
1060                return 0;
1061        }
1062
1063        /*
1064         * First of all, wake up the chip.
1065         */
1066        sa1111_wake(sachip);
1067
1068#ifdef CONFIG_ARCH_SA1100
1069        /* Enable the memory bus request/grant signals */
1070        sa1110_mb_enable();
1071#endif
1072
1073        /*
1074         * Only lock for write ops. Also, sa1111_wake must be called with
1075         * released spinlock!
1076         */
1077        spin_lock_irqsave(&sachip->lock, flags);
1078
1079        writel_relaxed(0, sachip->base + SA1111_INTC + SA1111_INTEN0);
1080        writel_relaxed(0, sachip->base + SA1111_INTC + SA1111_INTEN1);
1081
1082        base = sachip->base;
1083        writel_relaxed(save->skcr,     base + SA1111_SKCR);
1084        writel_relaxed(save->skpcr,    base + SA1111_SKPCR);
1085        writel_relaxed(save->skcdr,    base + SA1111_SKCDR);
1086        writel_relaxed(save->skaud,    base + SA1111_SKAUD);
1087        writel_relaxed(save->skpwm0,   base + SA1111_SKPWM0);
1088        writel_relaxed(save->skpwm1,   base + SA1111_SKPWM1);
1089
1090        base = sachip->base + SA1111_INTC;
1091        writel_relaxed(save->intpol0,  base + SA1111_INTPOL0);
1092        writel_relaxed(save->intpol1,  base + SA1111_INTPOL1);
1093        writel_relaxed(save->inten0,   base + SA1111_INTEN0);
1094        writel_relaxed(save->inten1,   base + SA1111_INTEN1);
1095        writel_relaxed(save->wakepol0, base + SA1111_WAKEPOL0);
1096        writel_relaxed(save->wakepol1, base + SA1111_WAKEPOL1);
1097        writel_relaxed(save->wakeen0,  base + SA1111_WAKEEN0);
1098        writel_relaxed(save->wakeen1,  base + SA1111_WAKEEN1);
1099
1100        spin_unlock_irqrestore(&sachip->lock, flags);
1101
1102        sachip->saved_state = NULL;
1103        kfree(save);
1104
1105        return 0;
1106}
1107
1108#else
1109#define sa1111_suspend_noirq NULL
1110#define sa1111_resume_noirq  NULL
1111#endif
1112
1113static int sa1111_probe(struct platform_device *pdev)
1114{
1115        struct resource *mem;
1116        int irq;
1117
1118        mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1119        if (!mem)
1120                return -EINVAL;
1121        irq = platform_get_irq(pdev, 0);
1122        if (irq < 0)
1123                return irq;
1124
1125        return __sa1111_probe(&pdev->dev, mem, irq);
1126}
1127
1128static int sa1111_remove(struct platform_device *pdev)
1129{
1130        struct sa1111 *sachip = platform_get_drvdata(pdev);
1131
1132        if (sachip) {
1133#ifdef CONFIG_PM
1134                kfree(sachip->saved_state);
1135                sachip->saved_state = NULL;
1136#endif
1137                __sa1111_remove(sachip);
1138                platform_set_drvdata(pdev, NULL);
1139        }
1140
1141        return 0;
1142}
1143
1144static struct dev_pm_ops sa1111_pm_ops = {
1145        .suspend_noirq = sa1111_suspend_noirq,
1146        .resume_noirq = sa1111_resume_noirq,
1147};
1148
1149/*
1150 *      Not sure if this should be on the system bus or not yet.
1151 *      We really want some way to register a system device at
1152 *      the per-machine level, and then have this driver pick
1153 *      up the registered devices.
1154 *
1155 *      We also need to handle the SDRAM configuration for
1156 *      PXA250/SA1110 machine classes.
1157 */
1158static struct platform_driver sa1111_device_driver = {
1159        .probe          = sa1111_probe,
1160        .remove         = sa1111_remove,
1161        .driver         = {
1162                .name   = "sa1111",
1163                .pm     = &sa1111_pm_ops,
1164        },
1165};
1166
1167/*
1168 *      Get the parent device driver (us) structure
1169 *      from a child function device
1170 */
1171static inline struct sa1111 *sa1111_chip_driver(struct sa1111_dev *sadev)
1172{
1173        return (struct sa1111 *)dev_get_drvdata(sadev->dev.parent);
1174}
1175
1176/*
1177 * The bits in the opdiv field are non-linear.
1178 */
1179static unsigned char opdiv_table[] = { 1, 4, 2, 8 };
1180
1181static unsigned int __sa1111_pll_clock(struct sa1111 *sachip)
1182{
1183        unsigned int skcdr, fbdiv, ipdiv, opdiv;
1184
1185        skcdr = readl_relaxed(sachip->base + SA1111_SKCDR);
1186
1187        fbdiv = (skcdr & 0x007f) + 2;
1188        ipdiv = ((skcdr & 0x0f80) >> 7) + 2;
1189        opdiv = opdiv_table[(skcdr & 0x3000) >> 12];
1190
1191        return 3686400 * fbdiv / (ipdiv * opdiv);
1192}
1193
1194/**
1195 *      sa1111_pll_clock - return the current PLL clock frequency.
1196 *      @sadev: SA1111 function block
1197 *
1198 *      BUG: we should look at SKCR.  We also blindly believe that
1199 *      the chip is being fed with the 3.6864MHz clock.
1200 *
1201 *      Returns the PLL clock in Hz.
1202 */
1203unsigned int sa1111_pll_clock(struct sa1111_dev *sadev)
1204{
1205        struct sa1111 *sachip = sa1111_chip_driver(sadev);
1206
1207        return __sa1111_pll_clock(sachip);
1208}
1209EXPORT_SYMBOL(sa1111_pll_clock);
1210
1211/**
1212 *      sa1111_select_audio_mode - select I2S or AC link mode
1213 *      @sadev: SA1111 function block
1214 *      @mode: One of %SA1111_AUDIO_ACLINK or %SA1111_AUDIO_I2S
1215 *
1216 *      Frob the SKCR to select AC Link mode or I2S mode for
1217 *      the audio block.
1218 */
1219void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode)
1220{
1221        struct sa1111 *sachip = sa1111_chip_driver(sadev);
1222        unsigned long flags;
1223        unsigned int val;
1224
1225        spin_lock_irqsave(&sachip->lock, flags);
1226
1227        val = readl_relaxed(sachip->base + SA1111_SKCR);
1228        if (mode == SA1111_AUDIO_I2S) {
1229                val &= ~SKCR_SELAC;
1230        } else {
1231                val |= SKCR_SELAC;
1232        }
1233        writel_relaxed(val, sachip->base + SA1111_SKCR);
1234
1235        spin_unlock_irqrestore(&sachip->lock, flags);
1236}
1237EXPORT_SYMBOL(sa1111_select_audio_mode);
1238
1239/**
1240 *      sa1111_set_audio_rate - set the audio sample rate
1241 *      @sadev: SA1111 SAC function block
1242 *      @rate: sample rate to select
1243 */
1244int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate)
1245{
1246        struct sa1111 *sachip = sa1111_chip_driver(sadev);
1247        unsigned int div;
1248
1249        if (sadev->devid != SA1111_DEVID_SAC)
1250                return -EINVAL;
1251
1252        div = (__sa1111_pll_clock(sachip) / 256 + rate / 2) / rate;
1253        if (div == 0)
1254                div = 1;
1255        if (div > 128)
1256                div = 128;
1257
1258        writel_relaxed(div - 1, sachip->base + SA1111_SKAUD);
1259
1260        return 0;
1261}
1262EXPORT_SYMBOL(sa1111_set_audio_rate);
1263
1264/**
1265 *      sa1111_get_audio_rate - get the audio sample rate
1266 *      @sadev: SA1111 SAC function block device
1267 */
1268int sa1111_get_audio_rate(struct sa1111_dev *sadev)
1269{
1270        struct sa1111 *sachip = sa1111_chip_driver(sadev);
1271        unsigned long div;
1272
1273        if (sadev->devid != SA1111_DEVID_SAC)
1274                return -EINVAL;
1275
1276        div = readl_relaxed(sachip->base + SA1111_SKAUD) + 1;
1277
1278        return __sa1111_pll_clock(sachip) / (256 * div);
1279}
1280EXPORT_SYMBOL(sa1111_get_audio_rate);
1281
1282/*
1283 * Individual device operations.
1284 */
1285
1286/**
1287 *      sa1111_enable_device - enable an on-chip SA1111 function block
1288 *      @sadev: SA1111 function block device to enable
1289 */
1290int sa1111_enable_device(struct sa1111_dev *sadev)
1291{
1292        struct sa1111 *sachip = sa1111_chip_driver(sadev);
1293        unsigned long flags;
1294        unsigned int val;
1295        int ret = 0;
1296
1297        if (sachip->pdata && sachip->pdata->enable)
1298                ret = sachip->pdata->enable(sachip->pdata->data, sadev->devid);
1299
1300        if (ret == 0) {
1301                spin_lock_irqsave(&sachip->lock, flags);
1302                val = readl_relaxed(sachip->base + SA1111_SKPCR);
1303                writel_relaxed(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
1304                spin_unlock_irqrestore(&sachip->lock, flags);
1305        }
1306        return ret;
1307}
1308EXPORT_SYMBOL(sa1111_enable_device);
1309
1310/**
1311 *      sa1111_disable_device - disable an on-chip SA1111 function block
1312 *      @sadev: SA1111 function block device to disable
1313 */
1314void sa1111_disable_device(struct sa1111_dev *sadev)
1315{
1316        struct sa1111 *sachip = sa1111_chip_driver(sadev);
1317        unsigned long flags;
1318        unsigned int val;
1319
1320        spin_lock_irqsave(&sachip->lock, flags);
1321        val = readl_relaxed(sachip->base + SA1111_SKPCR);
1322        writel_relaxed(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
1323        spin_unlock_irqrestore(&sachip->lock, flags);
1324
1325        if (sachip->pdata && sachip->pdata->disable)
1326                sachip->pdata->disable(sachip->pdata->data, sadev->devid);
1327}
1328EXPORT_SYMBOL(sa1111_disable_device);
1329
1330int sa1111_get_irq(struct sa1111_dev *sadev, unsigned num)
1331{
1332        struct sa1111 *sachip = sa1111_chip_driver(sadev);
1333        if (num >= ARRAY_SIZE(sadev->hwirq))
1334                return -EINVAL;
1335        return sa1111_map_irq(sachip, sadev->hwirq[num]);
1336}
1337EXPORT_SYMBOL_GPL(sa1111_get_irq);
1338
1339/*
1340 *      SA1111 "Register Access Bus."
1341 *
1342 *      We model this as a regular bus type, and hang devices directly
1343 *      off this.
1344 */
1345static int sa1111_match(struct device *_dev, struct device_driver *_drv)
1346{
1347        struct sa1111_dev *dev = to_sa1111_device(_dev);
1348        struct sa1111_driver *drv = SA1111_DRV(_drv);
1349
1350        return !!(dev->devid & drv->devid);
1351}
1352
1353static int sa1111_bus_probe(struct device *dev)
1354{
1355        struct sa1111_dev *sadev = to_sa1111_device(dev);
1356        struct sa1111_driver *drv = SA1111_DRV(dev->driver);
1357        int ret = -ENODEV;
1358
1359        if (drv->probe)
1360                ret = drv->probe(sadev);
1361        return ret;
1362}
1363
1364static int sa1111_bus_remove(struct device *dev)
1365{
1366        struct sa1111_dev *sadev = to_sa1111_device(dev);
1367        struct sa1111_driver *drv = SA1111_DRV(dev->driver);
1368        int ret = 0;
1369
1370        if (drv->remove)
1371                ret = drv->remove(sadev);
1372        return ret;
1373}
1374
1375struct bus_type sa1111_bus_type = {
1376        .name           = "sa1111-rab",
1377        .match          = sa1111_match,
1378        .probe          = sa1111_bus_probe,
1379        .remove         = sa1111_bus_remove,
1380};
1381EXPORT_SYMBOL(sa1111_bus_type);
1382
1383int sa1111_driver_register(struct sa1111_driver *driver)
1384{
1385        driver->drv.bus = &sa1111_bus_type;
1386        return driver_register(&driver->drv);
1387}
1388EXPORT_SYMBOL(sa1111_driver_register);
1389
1390void sa1111_driver_unregister(struct sa1111_driver *driver)
1391{
1392        driver_unregister(&driver->drv);
1393}
1394EXPORT_SYMBOL(sa1111_driver_unregister);
1395
1396#ifdef CONFIG_DMABOUNCE
1397/*
1398 * According to the "Intel StrongARM SA-1111 Microprocessor Companion
1399 * Chip Specification Update" (June 2000), erratum #7, there is a
1400 * significant bug in the SA1111 SDRAM shared memory controller.  If
1401 * an access to a region of memory above 1MB relative to the bank base,
1402 * it is important that address bit 10 _NOT_ be asserted. Depending
1403 * on the configuration of the RAM, bit 10 may correspond to one
1404 * of several different (processor-relative) address bits.
1405 *
1406 * This routine only identifies whether or not a given DMA address
1407 * is susceptible to the bug.
1408 *
1409 * This should only get called for sa1111_device types due to the
1410 * way we configure our device dma_masks.
1411 */
1412static int sa1111_needs_bounce(struct device *dev, dma_addr_t addr, size_t size)
1413{
1414        /*
1415         * Section 4.6 of the "Intel StrongARM SA-1111 Development Module
1416         * User's Guide" mentions that jumpers R51 and R52 control the
1417         * target of SA-1111 DMA (either SDRAM bank 0 on Assabet, or
1418         * SDRAM bank 1 on Neponset). The default configuration selects
1419         * Assabet, so any address in bank 1 is necessarily invalid.
1420         */
1421        return (machine_is_assabet() || machine_is_pfs168()) &&
1422                (addr >= 0xc8000000 || (addr + size) >= 0xc8000000);
1423}
1424
1425static int sa1111_notifier_call(struct notifier_block *n, unsigned long action,
1426        void *data)
1427{
1428        struct sa1111_dev *dev = to_sa1111_device(data);
1429
1430        switch (action) {
1431        case BUS_NOTIFY_ADD_DEVICE:
1432                if (dev->dev.dma_mask && dev->dma_mask < 0xffffffffUL) {
1433                        int ret = dmabounce_register_dev(&dev->dev, 1024, 4096,
1434                                        sa1111_needs_bounce);
1435                        if (ret)
1436                                dev_err(&dev->dev, "failed to register with dmabounce: %d\n", ret);
1437                }
1438                break;
1439
1440        case BUS_NOTIFY_DEL_DEVICE:
1441                if (dev->dev.dma_mask && dev->dma_mask < 0xffffffffUL)
1442                        dmabounce_unregister_dev(&dev->dev);
1443                break;
1444        }
1445        return NOTIFY_OK;
1446}
1447
1448static struct notifier_block sa1111_bus_notifier = {
1449        .notifier_call = sa1111_notifier_call,
1450};
1451#endif
1452
1453static int __init sa1111_init(void)
1454{
1455        int ret = bus_register(&sa1111_bus_type);
1456#ifdef CONFIG_DMABOUNCE
1457        if (ret == 0)
1458                bus_register_notifier(&sa1111_bus_type, &sa1111_bus_notifier);
1459#endif
1460        if (ret == 0)
1461                platform_driver_register(&sa1111_device_driver);
1462        return ret;
1463}
1464
1465static void __exit sa1111_exit(void)
1466{
1467        platform_driver_unregister(&sa1111_device_driver);
1468#ifdef CONFIG_DMABOUNCE
1469        bus_unregister_notifier(&sa1111_bus_type, &sa1111_bus_notifier);
1470#endif
1471        bus_unregister(&sa1111_bus_type);
1472}
1473
1474subsys_initcall(sa1111_init);
1475module_exit(sa1111_exit);
1476
1477MODULE_DESCRIPTION("Intel Corporation SA1111 core driver");
1478MODULE_LICENSE("GPL");
1479