linux/arch/arm/mach-omap1/gpio16xx.c
<<
>>
Prefs
   1/*
   2 * OMAP16xx specific gpio init
   3 *
   4 * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
   5 *
   6 * Author:
   7 *      Charulatha V <charu@ti.com>
   8 *
   9 * This program is free software; you can redistribute it and/or
  10 * modify it under the terms of the GNU General Public License as
  11 * published by the Free Software Foundation version 2.
  12 *
  13 * This program is distributed "as is" WITHOUT ANY WARRANTY of any
  14 * kind, whether express or implied; without even the implied warranty
  15 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16 * GNU General Public License for more details.
  17 */
  18
  19#include <linux/gpio.h>
  20#include <linux/platform_data/gpio-omap.h>
  21
  22#include <mach/irqs.h>
  23
  24#include "soc.h"
  25
  26#define OMAP1610_GPIO1_BASE             0xfffbe400
  27#define OMAP1610_GPIO2_BASE             0xfffbec00
  28#define OMAP1610_GPIO3_BASE             0xfffbb400
  29#define OMAP1610_GPIO4_BASE             0xfffbbc00
  30#define OMAP1_MPUIO_VBASE               OMAP1_MPUIO_BASE
  31
  32/* smart idle, enable wakeup */
  33#define SYSCONFIG_WORD                  0x14
  34
  35/* mpu gpio */
  36static struct resource omap16xx_mpu_gpio_resources[] = {
  37        {
  38                .start  = OMAP1_MPUIO_VBASE,
  39                .end    = OMAP1_MPUIO_VBASE + SZ_2K - 1,
  40                .flags  = IORESOURCE_MEM,
  41        },
  42        {
  43                .start  = INT_MPUIO,
  44                .flags  = IORESOURCE_IRQ,
  45        },
  46};
  47
  48static struct omap_gpio_reg_offs omap16xx_mpuio_regs = {
  49        .revision       = USHRT_MAX,
  50        .direction      = OMAP_MPUIO_IO_CNTL,
  51        .datain         = OMAP_MPUIO_INPUT_LATCH,
  52        .dataout        = OMAP_MPUIO_OUTPUT,
  53        .irqstatus      = OMAP_MPUIO_GPIO_INT,
  54        .irqenable      = OMAP_MPUIO_GPIO_MASKIT,
  55        .irqenable_inv  = true,
  56        .irqctrl        = OMAP_MPUIO_GPIO_INT_EDGE,
  57};
  58
  59static struct omap_gpio_platform_data omap16xx_mpu_gpio_config = {
  60        .is_mpuio               = true,
  61        .bank_width             = 16,
  62        .bank_stride            = 1,
  63        .regs                   = &omap16xx_mpuio_regs,
  64};
  65
  66static struct platform_device omap16xx_mpu_gpio = {
  67        .name           = "omap_gpio",
  68        .id             = 0,
  69        .dev            = {
  70                .platform_data = &omap16xx_mpu_gpio_config,
  71        },
  72        .num_resources = ARRAY_SIZE(omap16xx_mpu_gpio_resources),
  73        .resource = omap16xx_mpu_gpio_resources,
  74};
  75
  76/* gpio1 */
  77static struct resource omap16xx_gpio1_resources[] = {
  78        {
  79                .start  = OMAP1610_GPIO1_BASE,
  80                .end    = OMAP1610_GPIO1_BASE + SZ_2K - 1,
  81                .flags  = IORESOURCE_MEM,
  82        },
  83        {
  84                .start  = INT_GPIO_BANK1,
  85                .flags  = IORESOURCE_IRQ,
  86        },
  87};
  88
  89static struct omap_gpio_reg_offs omap16xx_gpio_regs = {
  90        .revision       = OMAP1610_GPIO_REVISION,
  91        .direction      = OMAP1610_GPIO_DIRECTION,
  92        .set_dataout    = OMAP1610_GPIO_SET_DATAOUT,
  93        .clr_dataout    = OMAP1610_GPIO_CLEAR_DATAOUT,
  94        .datain         = OMAP1610_GPIO_DATAIN,
  95        .dataout        = OMAP1610_GPIO_DATAOUT,
  96        .irqstatus      = OMAP1610_GPIO_IRQSTATUS1,
  97        .irqenable      = OMAP1610_GPIO_IRQENABLE1,
  98        .set_irqenable  = OMAP1610_GPIO_SET_IRQENABLE1,
  99        .clr_irqenable  = OMAP1610_GPIO_CLEAR_IRQENABLE1,
 100        .wkup_en        = OMAP1610_GPIO_WAKEUPENABLE,
 101        .edgectrl1      = OMAP1610_GPIO_EDGE_CTRL1,
 102        .edgectrl2      = OMAP1610_GPIO_EDGE_CTRL2,
 103};
 104
 105static struct omap_gpio_platform_data omap16xx_gpio1_config = {
 106        .bank_width             = 16,
 107        .regs                   = &omap16xx_gpio_regs,
 108};
 109
 110static struct platform_device omap16xx_gpio1 = {
 111        .name           = "omap_gpio",
 112        .id             = 1,
 113        .dev            = {
 114                .platform_data = &omap16xx_gpio1_config,
 115        },
 116        .num_resources = ARRAY_SIZE(omap16xx_gpio1_resources),
 117        .resource = omap16xx_gpio1_resources,
 118};
 119
 120/* gpio2 */
 121static struct resource omap16xx_gpio2_resources[] = {
 122        {
 123                .start  = OMAP1610_GPIO2_BASE,
 124                .end    = OMAP1610_GPIO2_BASE + SZ_2K - 1,
 125                .flags  = IORESOURCE_MEM,
 126        },
 127        {
 128                .start  = INT_1610_GPIO_BANK2,
 129                .flags  = IORESOURCE_IRQ,
 130        },
 131};
 132
 133static struct omap_gpio_platform_data omap16xx_gpio2_config = {
 134        .bank_width             = 16,
 135        .regs                   = &omap16xx_gpio_regs,
 136};
 137
 138static struct platform_device omap16xx_gpio2 = {
 139        .name           = "omap_gpio",
 140        .id             = 2,
 141        .dev            = {
 142                .platform_data = &omap16xx_gpio2_config,
 143        },
 144        .num_resources = ARRAY_SIZE(omap16xx_gpio2_resources),
 145        .resource = omap16xx_gpio2_resources,
 146};
 147
 148/* gpio3 */
 149static struct resource omap16xx_gpio3_resources[] = {
 150        {
 151                .start  = OMAP1610_GPIO3_BASE,
 152                .end    = OMAP1610_GPIO3_BASE + SZ_2K - 1,
 153                .flags  = IORESOURCE_MEM,
 154        },
 155        {
 156                .start  = INT_1610_GPIO_BANK3,
 157                .flags  = IORESOURCE_IRQ,
 158        },
 159};
 160
 161static struct omap_gpio_platform_data omap16xx_gpio3_config = {
 162        .bank_width             = 16,
 163        .regs                   = &omap16xx_gpio_regs,
 164};
 165
 166static struct platform_device omap16xx_gpio3 = {
 167        .name           = "omap_gpio",
 168        .id             = 3,
 169        .dev            = {
 170                .platform_data = &omap16xx_gpio3_config,
 171        },
 172        .num_resources = ARRAY_SIZE(omap16xx_gpio3_resources),
 173        .resource = omap16xx_gpio3_resources,
 174};
 175
 176/* gpio4 */
 177static struct resource omap16xx_gpio4_resources[] = {
 178        {
 179                .start  = OMAP1610_GPIO4_BASE,
 180                .end    = OMAP1610_GPIO4_BASE + SZ_2K - 1,
 181                .flags  = IORESOURCE_MEM,
 182        },
 183        {
 184                .start  = INT_1610_GPIO_BANK4,
 185                .flags  = IORESOURCE_IRQ,
 186        },
 187};
 188
 189static struct omap_gpio_platform_data omap16xx_gpio4_config = {
 190        .bank_width             = 16,
 191        .regs                   = &omap16xx_gpio_regs,
 192};
 193
 194static struct platform_device omap16xx_gpio4 = {
 195        .name           = "omap_gpio",
 196        .id             = 4,
 197        .dev            = {
 198                .platform_data = &omap16xx_gpio4_config,
 199        },
 200        .num_resources = ARRAY_SIZE(omap16xx_gpio4_resources),
 201        .resource = omap16xx_gpio4_resources,
 202};
 203
 204static struct platform_device *omap16xx_gpio_dev[] __initdata = {
 205        &omap16xx_mpu_gpio,
 206        &omap16xx_gpio1,
 207        &omap16xx_gpio2,
 208        &omap16xx_gpio3,
 209        &omap16xx_gpio4,
 210};
 211
 212/*
 213 * omap16xx_gpio_init needs to be done before
 214 * machine_init functions access gpio APIs.
 215 * Hence omap16xx_gpio_init is a postcore_initcall.
 216 */
 217static int __init omap16xx_gpio_init(void)
 218{
 219        int i;
 220        void __iomem *base;
 221        struct resource *res;
 222        struct platform_device *pdev;
 223        struct omap_gpio_platform_data *pdata;
 224
 225        if (!cpu_is_omap16xx())
 226                return -EINVAL;
 227
 228        /*
 229         * Enable system clock for GPIO module.
 230         * The CAM_CLK_CTRL *is* really the right place.
 231         */
 232        omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04,
 233                                        ULPD_CAM_CLK_CTRL);
 234
 235        for (i = 0; i < ARRAY_SIZE(omap16xx_gpio_dev); i++) {
 236                pdev = omap16xx_gpio_dev[i];
 237                pdata = pdev->dev.platform_data;
 238
 239                res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 240                if (unlikely(!res)) {
 241                        dev_err(&pdev->dev, "Invalid mem resource.\n");
 242                        return -ENODEV;
 243                }
 244
 245                base = ioremap(res->start, resource_size(res));
 246                if (unlikely(!base)) {
 247                        dev_err(&pdev->dev, "ioremap failed.\n");
 248                        return -ENOMEM;
 249                }
 250
 251                __raw_writel(SYSCONFIG_WORD, base + OMAP1610_GPIO_SYSCONFIG);
 252                iounmap(base);
 253
 254                platform_device_register(omap16xx_gpio_dev[i]);
 255        }
 256
 257        return 0;
 258}
 259postcore_initcall(omap16xx_gpio_init);
 260