// SPDX-License-Identifier: GPL-2.0
//
// Copyright (c) 2006 Simtec Electronics
//      Ben Dooks <ben@simtec.co.uk>
//
// Common code for SMDK2410 and SMDK2440 boards
//
// http://www.fluff.org/ben/smdk2440/

#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/device.h>
#include <linux/platform_device.h>

#include <linux/mtd/mtd.h>
#include <linux/mtd/rawnand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <linux/io.h>

#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>

#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <asm/irq.h>

#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
#include <linux/platform_data/leds-s3c24xx.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>

#include <plat/gpio-cfg.h>
#include <plat/devs.h>
#include <plat/pm.h>

#include "common-smdk.h"

/* LED devices */

static struct s3c24xx_led_platdata smdk_pdata_led4 = {
        .gpio           = S3C2410_GPF(4),
        .flags          = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
        .name           = "led4",
        .def_trigger    = "timer",
};

static struct s3c24xx_led_platdata smdk_pdata_led5 = {
        .gpio           = S3C2410_GPF(5),
        .flags          = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
        .name           = "led5",
        .def_trigger    = "nand-disk",
};

static struct s3c24xx_led_platdata smdk_pdata_led6 = {
        .gpio           = S3C2410_GPF(6),
        .flags          = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
        .name           = "led6",
};

static struct s3c24xx_led_platdata smdk_pdata_led7 = {
        .gpio           = S3C2410_GPF(7),
        .flags          = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
        .name           = "led7",
};

static struct platform_device smdk_led4 = {
        .name           = "s3c24xx_led",
        .id             = 0,
        .dev            = {
                .platform_data = &smdk_pdata_led4,
        },
};

static struct platform_device smdk_led5 = {
        .name           = "s3c24xx_led",
        .id             = 1,
        .dev            = {
                .platform_data = &smdk_pdata_led5,
        },
};

static struct platform_device smdk_led6 = {
        .name           = "s3c24xx_led",
        .id             = 2,
        .dev            = {
                .platform_data = &smdk_pdata_led6,
        },
};

static struct platform_device smdk_led7 = {
        .name           = "s3c24xx_led",
        .id             = 3,
        .dev            = {
                .platform_data = &smdk_pdata_led7,
        },
};

/* NAND parititon from 2.4.18-swl5 */

static struct mtd_partition smdk_default_nand_part[] = {
        [0] = {
                .name   = "Boot Agent",
                .size   = SZ_16K,
                .offset = 0,
        },
        [1] = {
                .name   = "S3C2410 flash partition 1",
                .offset = 0,
                .size   = SZ_2M,
        },
        [2] = {
                .name   = "S3C2410 flash partition 2",
                .offset = SZ_4M,
                .size   = SZ_4M,
        },
        [3] = {
                .name   = "S3C2410 flash partition 3",
                .offset = SZ_8M,
                .size   = SZ_2M,
        },
        [4] = {
                .name   = "S3C2410 flash partition 4",
                .offset = SZ_1M * 10,
                .size   = SZ_4M,
        },
        [5] = {
                .name   = "S3C2410 flash partition 5",
                .offset = SZ_1M * 14,
                .size   = SZ_1M * 10,
        },
        [6] = {
                .name   = "S3C2410 flash partition 6",
                .offset = SZ_1M * 24,
                .size   = SZ_1M * 24,
        },
        [7] = {
                .name   = "S3C2410 flash partition 7",
                .offset = SZ_1M * 48,
                .size   = MTDPART_SIZ_FULL,
        }
};

static struct s3c2410_nand_set smdk_nand_sets[] = {
        [0] = {
                .name           = "NAND",
                .nr_chips       = 1,
                .nr_partitions  = ARRAY_SIZE(smdk_default_nand_part),
                .partitions     = smdk_default_nand_part,
        },
};

/* choose a set of timings which should suit most 512Mbit
 * chips and beyond.
*/

static struct s3c2410_platform_nand smdk_nand_info = {
        .tacls          = 20,
        .twrph0         = 60,
        .twrph1         = 20,
        .nr_sets        = ARRAY_SIZE(smdk_nand_sets),
        .sets           = smdk_nand_sets,
        .ecc_mode       = NAND_ECC_SOFT,
};

/* devices we initialise */

static struct platform_device __initdata *smdk_devs[] = {
        &s3c_device_nand,
        &smdk_led4,
        &smdk_led5,
        &smdk_led6,
        &smdk_led7,
};

static const struct gpio smdk_led_gpios[] = {
        { S3C2410_GPF(4), GPIOF_OUT_INIT_HIGH, NULL },
        { S3C2410_GPF(5), GPIOF_OUT_INIT_HIGH, NULL },
        { S3C2410_GPF(6), GPIOF_OUT_INIT_HIGH, NULL },
        { S3C2410_GPF(7), GPIOF_OUT_INIT_HIGH, NULL },
};

void __init smdk_machine_init(void)
{
        /* Configure the LEDs (even if we have no LED support)*/

        int ret = gpio_request_array(smdk_led_gpios,
                                     ARRAY_SIZE(smdk_led_gpios));
        if (!WARN_ON(ret < 0))
                gpio_free_array(smdk_led_gpios, ARRAY_SIZE(smdk_led_gpios));

        if (machine_is_smdk2443())
                smdk_nand_info.twrph0 = 50;

        s3c_nand_set_platdata(&smdk_nand_info);

        platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs));

        s3c_pm_init();
}