// SPDX-License-Identifier: GPL-2.0
//
// Speyside modules for Cragganmore - board data probing
//
// Copyright 2011 Wolfson Microelectronics plc
//      Mark Brown <broonie@opensource.wolfsonmicro.com>

#include <linux/export.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/gpio/machine.h>

#include <linux/mfd/wm831x/irq.h>
#include <linux/mfd/wm831x/gpio.h>
#include <linux/mfd/wm8994/pdata.h>
#include <linux/mfd/arizona/pdata.h>

#include <linux/regulator/machine.h>

#include <sound/wm0010.h>
#include <sound/wm2200.h>
#include <sound/wm5100.h>
#include <sound/wm8996.h>
#include <sound/wm8962.h>
#include <sound/wm9081.h>

#include <linux/platform_data/spi-s3c64xx.h>

#include <plat/cpu.h>
#include <mach/irqs.h>

#include "crag6410.h"

static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
        .line = S3C64XX_GPC(3),
};

static struct wm0010_pdata wm0010_pdata = {
        .gpio_reset = S3C64XX_GPN(6),
        .reset_active_high = 1, /* Active high for Glenfarclas Rev 2 */
};

static struct spi_board_info wm1253_devs[] = {
        [0] = {
                .modalias       = "wm0010",
                .max_speed_hz   = 26 * 1000 * 1000,
                .bus_num        = 0,
                .chip_select    = 0,
                .mode           = SPI_MODE_0,
                .irq            = S3C_EINT(4),
                .controller_data = &wm0010_spi_csinfo,
                .platform_data = &wm0010_pdata,
        },
};

static struct spi_board_info balblair_devs[] = {
        [0] = {
                .modalias       = "wm0010",
                .max_speed_hz   = 26 * 1000 * 1000,
                .bus_num        = 0,
                .chip_select    = 0,
                .mode           = SPI_MODE_0,
                .irq            = S3C_EINT(4),
                .controller_data = &wm0010_spi_csinfo,
                .platform_data = &wm0010_pdata,
        },
};

static struct wm5100_pdata wm5100_pdata = {
        .ldo_ena = S3C64XX_GPN(7),
        .irq_flags = IRQF_TRIGGER_HIGH,
        .gpio_base = CODEC_GPIO_BASE,

        .in_mode = {
                WM5100_IN_DIFF,
                WM5100_IN_DIFF,
                WM5100_IN_DIFF,
                WM5100_IN_SE,
        },

        .hp_pol = CODEC_GPIO_BASE + 3,
        .jack_modes = {
                { WM5100_MICDET_MICBIAS3, 0, 0 },
                { WM5100_MICDET_MICBIAS2, 1, 1 },
        },

        .gpio_defaults = {
                0,
                0,
                0,
                0,
                0x2, /* IRQ: CMOS output */
                0x3, /* CLKOUT: CMOS output */
        },
};

static struct wm8996_retune_mobile_config wm8996_retune[] = {
        {
                .name = "Sub LPF",
                .rate = 48000,
                .regs = {
                        0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
                        0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
                        0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
                },
        },
        {
                .name = "Sub HPF",
                .rate = 48000,
                .regs = {
                        0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
                        0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
                        0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
                },
        },
};

static struct wm8996_pdata wm8996_pdata __initdata = {
        .ldo_ena = S3C64XX_GPN(7),
        .gpio_base = CODEC_GPIO_BASE,
        .micdet_def = 1,
        .inl_mode = WM8996_DIFFERRENTIAL_1,
        .inr_mode = WM8996_DIFFERRENTIAL_1,

        .irq_flags = IRQF_TRIGGER_RISING,

        .gpio_default = {
                0x8001, /* GPIO1 == ADCLRCLK1 */
                0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */
                0x0141, /* GPIO3 == HP_SEL */
                0x0002, /* GPIO4 == IRQ */
                0x020e, /* GPIO5 == CLKOUT */
        },

        .retune_mobile_cfgs = wm8996_retune,
        .num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune),
};

static struct wm8962_pdata wm8962_pdata __initdata = {
        .gpio_init = {
                0,
                WM8962_GPIO_FN_OPCLK,
                WM8962_GPIO_FN_DMICCLK,
                0,
                0x8000 | WM8962_GPIO_FN_DMICDAT,
                WM8962_GPIO_FN_IRQ,    /* Open drain mode */
        },
        .in4_dc_measure = true,
};

static struct wm9081_pdata wm9081_pdata __initdata = {
        .irq_high = false,
        .irq_cmos = false,
};

static const struct i2c_board_info wm1254_devs[] = {
        { I2C_BOARD_INFO("wm8996", 0x1a),
          .platform_data = &wm8996_pdata,
          .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
        },
        { I2C_BOARD_INFO("wm9081", 0x6c),
          .platform_data = &wm9081_pdata, },
};

static const struct i2c_board_info wm1255_devs[] = {
        { I2C_BOARD_INFO("wm5100", 0x1a),
          .platform_data = &wm5100_pdata,
          .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
        },
        { I2C_BOARD_INFO("wm9081", 0x6c),
          .platform_data = &wm9081_pdata, },
};

static const struct i2c_board_info wm1259_devs[] = {
        { I2C_BOARD_INFO("wm8962", 0x1a),
          .platform_data = &wm8962_pdata,
          .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
        },
};

static struct regulator_init_data wm8994_ldo1 = {
        .supply_regulator = "WALLVDD",
};

static struct regulator_init_data wm8994_ldo2 = {
        .supply_regulator = "WALLVDD",
};

static struct wm8994_pdata wm8994_pdata = {
        .gpio_base = CODEC_GPIO_BASE,
        .micb2_delay = 150,
        .gpio_defaults = {
                0x3,          /* IRQ out, active high, CMOS */
        },
        .ldo = {
                 { .init_data = &wm8994_ldo1, },
                 { .init_data = &wm8994_ldo2, },
        },
};

static const struct i2c_board_info wm1277_devs[] = {
        { I2C_BOARD_INFO("wm8958", 0x1a),  /* WM8958 is the superset */
          .platform_data = &wm8994_pdata,
          .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
          .dev_name = "wm8958",
        },
};

static struct gpiod_lookup_table wm8994_gpiod_table = {
        .dev_id = "i2c-wm8958", /* I2C device name */
        .table = {
                GPIO_LOOKUP("GPION", 6,
                            "wlf,ldo1ena", GPIO_ACTIVE_HIGH),
                GPIO_LOOKUP("GPION", 4,
                            "wlf,ldo2ena", GPIO_ACTIVE_HIGH),
                { },
        },
};

static struct arizona_pdata wm5102_reva_pdata = {
        .gpio_base = CODEC_GPIO_BASE,
        .irq_flags = IRQF_TRIGGER_HIGH,
        .micd_pol_gpio = CODEC_GPIO_BASE + 4,
        .micd_rate = 6,
        .gpio_defaults = {
                [2] = 0x10000, /* AIF3TXLRCLK */
                [3] = 0x4,     /* OPCLK */
        },
};

static struct s3c64xx_spi_csinfo codec_spi_csinfo = {
        .line = S3C64XX_GPN(5),
};

static struct spi_board_info wm5102_reva_spi_devs[] = {
        [0] = {
                .modalias       = "wm5102",
                .max_speed_hz   = 10 * 1000 * 1000,
                .bus_num        = 0,
                .chip_select    = 1,
                .mode           = SPI_MODE_0,
                .irq            = GLENFARCLAS_PMIC_IRQ_BASE +
                                  WM831X_IRQ_GPIO_2,
                .controller_data = &codec_spi_csinfo,
                .platform_data = &wm5102_reva_pdata,
        },
};

static struct gpiod_lookup_table wm5102_reva_gpiod_table = {
        .dev_id = "spi0.1", /* SPI device name */
        .table = {
                GPIO_LOOKUP("GPION", 7,
                            "wlf,ldoena", GPIO_ACTIVE_HIGH),
                { },
        },
};

static struct arizona_pdata wm5102_pdata = {
        .gpio_base = CODEC_GPIO_BASE,
        .irq_flags = IRQF_TRIGGER_HIGH,
        .micd_pol_gpio = CODEC_GPIO_BASE + 2,
        .gpio_defaults = {
                [2] = 0x10000, /* AIF3TXLRCLK */
                [3] = 0x4,     /* OPCLK */
        },
};

static struct spi_board_info wm5102_spi_devs[] = {
        [0] = {
                .modalias       = "wm5102",
                .max_speed_hz   = 10 * 1000 * 1000,
                .bus_num        = 0,
                .chip_select    = 1,
                .mode           = SPI_MODE_0,
                .irq            = GLENFARCLAS_PMIC_IRQ_BASE +
                                  WM831X_IRQ_GPIO_2,
                .controller_data = &codec_spi_csinfo,
                .platform_data = &wm5102_pdata,
        },
};

static struct gpiod_lookup_table wm5102_gpiod_table = {
        .dev_id = "spi0.1", /* SPI device name */
        .table = {
                GPIO_LOOKUP("GPION", 7,
                            "wlf,ldo1ena", GPIO_ACTIVE_HIGH),
                { },
        },
};

static struct spi_board_info wm5110_spi_devs[] = {
        [0] = {
                .modalias       = "wm5110",
                .max_speed_hz   = 10 * 1000 * 1000,
                .bus_num        = 0,
                .chip_select    = 1,
                .mode           = SPI_MODE_0,
                .irq            = GLENFARCLAS_PMIC_IRQ_BASE +
                                  WM831X_IRQ_GPIO_2,
                .controller_data = &codec_spi_csinfo,
                .platform_data = &wm5102_reva_pdata,
        },
};

static const struct i2c_board_info wm6230_i2c_devs[] = {
        { I2C_BOARD_INFO("wm9081", 0x6c),
          .platform_data = &wm9081_pdata, },
};

static struct wm2200_pdata wm2200_pdata = {
        .ldo_ena = S3C64XX_GPN(7),
        .gpio_defaults = {
                [2] = 0x0005,  /* GPIO3 24.576MHz output clock */
        },
};

static const struct i2c_board_info wm2200_i2c[] = {
        { I2C_BOARD_INFO("wm2200", 0x3a),
          .platform_data = &wm2200_pdata, },
};

static const struct {
        u8 id;
        u8 rev;
        const char *name;
        const struct i2c_board_info *i2c_devs;
        int num_i2c_devs;
        const struct spi_board_info *spi_devs;
        int num_spi_devs;

        struct gpiod_lookup_table *gpiod_table;
} gf_mods[] = {
        { .id = 0x01, .rev = 0xff, .name = "1250-EV1 Springbank" },
        { .id = 0x02, .rev = 0xff, .name = "1251-EV1 Jura" },
        { .id = 0x03, .rev = 0xff, .name = "1252-EV1 Glenlivet" },
        { .id = 0x06, .rev = 0xff, .name = "WM8997-6721-CS96-EV1 Lapraoig" },
        { .id = 0x07, .rev = 0xff, .name = "WM5110-6271 Deanston",
          .spi_devs = wm5110_spi_devs,
          .num_spi_devs = ARRAY_SIZE(wm5110_spi_devs) },
        { .id = 0x08, .rev = 0xff, .name = "WM8903-6102 Tamdhu" },
        { .id = 0x09, .rev = 0xff, .name = "WM1811A-6305 Adelphi" },
        { .id = 0x0a, .rev = 0xff, .name = "WM8996-6272 Blackadder" },
        { .id = 0x0b, .rev = 0xff, .name = "WM8994-6235 Benromach" },
        { .id = 0x11, .rev = 0xff, .name = "6249-EV2 Glenfarclas", },
        { .id = 0x14, .rev = 0xff, .name = "6271-EV1 Lochnagar" },
        { .id = 0x15, .rev = 0xff, .name = "6320-EV1 Bells",
          .i2c_devs = wm6230_i2c_devs,
          .num_i2c_devs = ARRAY_SIZE(wm6230_i2c_devs) },
        { .id = 0x21, .rev = 0xff, .name = "1275-EV1 Mortlach" },
        { .id = 0x25, .rev = 0xff, .name = "1274-EV1 Glencadam" },
        { .id = 0x31, .rev = 0xff, .name = "1253-EV1 Tomatin",
          .spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs) },
        { .id = 0x32, .rev = 0xff, .name = "XXXX-EV1 Caol Illa" },
        { .id = 0x33, .rev = 0xff, .name = "XXXX-EV1 Oban" },
        { .id = 0x34, .rev = 0xff, .name = "WM0010-6320-CS42 Balblair",
          .spi_devs = balblair_devs,
          .num_spi_devs = ARRAY_SIZE(balblair_devs) },
        { .id = 0x39, .rev = 0xff, .name = "1254-EV1 Dallas Dhu",
          .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) },
        { .id = 0x3a, .rev = 0xff, .name = "1259-EV1 Tobermory",
          .i2c_devs = wm1259_devs, .num_i2c_devs = ARRAY_SIZE(wm1259_devs) },
        { .id = 0x3b, .rev = 0xff, .name = "1255-EV1 Kilchoman",
          .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) },
        { .id = 0x3c, .rev = 0xff, .name = "1273-EV1 Longmorn" },
        { .id = 0x3d, .rev = 0xff, .name = "1277-EV1 Littlemill",
          .i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs),
          .gpiod_table = &wm8994_gpiod_table },
        { .id = 0x3e, .rev = 0, .name = "WM5102-6271-EV1-CS127 Amrut",
          .spi_devs = wm5102_reva_spi_devs,
          .num_spi_devs = ARRAY_SIZE(wm5102_reva_spi_devs),
          .gpiod_table = &wm5102_reva_gpiod_table },
        { .id = 0x3e, .rev = -1, .name = "WM5102-6271-EV1-CS127 Amrut",
          .spi_devs = wm5102_spi_devs,
          .num_spi_devs = ARRAY_SIZE(wm5102_spi_devs),
          .gpiod_table = &wm5102_gpiod_table },
        { .id = 0x3f, .rev = -1, .name = "WM2200-6271-CS90-M-REV1",
          .i2c_devs = wm2200_i2c, .num_i2c_devs = ARRAY_SIZE(wm2200_i2c) },
};

static int wlf_gf_module_probe(struct i2c_client *i2c,
                               const struct i2c_device_id *i2c_id)
{
        int ret, i, j, id, rev;

        ret = i2c_smbus_read_byte_data(i2c, 0);
        if (ret < 0) {
                dev_err(&i2c->dev, "Failed to read ID: %d\n", ret);
                return ret;
        }

        id = (ret & 0xfe) >> 2;
        rev = ret & 0x3;
        for (i = 0; i < ARRAY_SIZE(gf_mods); i++)
                if (id == gf_mods[i].id && (gf_mods[i].rev == 0xff ||
                                            rev == gf_mods[i].rev))
                        break;

        gpiod_add_lookup_table(&wm5102_reva_gpiod_table);
        gpiod_add_lookup_table(&wm5102_gpiod_table);
        gpiod_add_lookup_table(&wm8994_gpiod_table);

        if (i < ARRAY_SIZE(gf_mods)) {
                dev_info(&i2c->dev, "%s revision %d\n",
                         gf_mods[i].name, rev + 1);

                for (j = 0; j < gf_mods[i].num_i2c_devs; j++) {
                        if (!i2c_new_device(i2c->adapter,
                                            &(gf_mods[i].i2c_devs[j])))
                                dev_err(&i2c->dev,
                                        "Failed to register dev: %d\n", ret);
                }

                spi_register_board_info(gf_mods[i].spi_devs,
                                        gf_mods[i].num_spi_devs);

                if (gf_mods[i].gpiod_table)
                        gpiod_add_lookup_table(gf_mods[i].gpiod_table);
        } else {
                dev_warn(&i2c->dev, "Unknown module ID 0x%x revision %d\n",
                         id, rev + 1);
        }

        return 0;
}

static const struct i2c_device_id wlf_gf_module_id[] = {
        { "wlf-gf-module", 0 },
        { }
};

static struct i2c_driver wlf_gf_module_driver = {
        .driver = {
                .name = "wlf-gf-module"
        },
        .probe = wlf_gf_module_probe,
        .id_table = wlf_gf_module_id,
};

static int __init wlf_gf_module_register(void)
{
        if (!soc_is_s3c64xx())
                return 0;

        return i2c_add_driver(&wlf_gf_module_driver);
}
device_initcall(wlf_gf_module_register);