linux/arch/arm/mach-sa1100/collie.c
<<
>>
Prefs
   1/*
   2 * linux/arch/arm/mach-sa1100/collie.c
   3 *
   4 * May be copied or modified under the terms of the GNU General Public
   5 * License.  See linux/COPYING for more information.
   6 *
   7 * This file contains all Collie-specific tweaks.
   8 *
   9 * This program is free software; you can redistribute it and/or modify
  10 * it under the terms of the GNU General Public License version 2 as
  11 * published by the Free Software Foundation.
  12 *
  13 * ChangeLog:
  14 *  2006 Pavel Machek <pavel@ucw.cz>
  15 *  03-06-2004 John Lenz <lenz@cs.wisc.edu>
  16 *  06-04-2002 Chris Larson <kergoth@digitalnemesis.net>
  17 *  04-16-2001 Lineo Japan,Inc. ...
  18 */
  19
  20#include <linux/init.h>
  21#include <linux/kernel.h>
  22#include <linux/tty.h>
  23#include <linux/delay.h>
  24#include <linux/platform_data/sa11x0-serial.h>
  25#include <linux/platform_device.h>
  26#include <linux/mfd/ucb1x00.h>
  27#include <linux/mtd/mtd.h>
  28#include <linux/mtd/partitions.h>
  29#include <linux/timer.h>
  30#include <linux/gpio_keys.h>
  31#include <linux/input.h>
  32#include <linux/gpio.h>
  33#include <linux/power/gpio-charger.h>
  34
  35#include <video/sa1100fb.h>
  36
  37#include <mach/hardware.h>
  38#include <asm/mach-types.h>
  39#include <asm/page.h>
  40#include <asm/setup.h>
  41#include <mach/collie.h>
  42
  43#include <asm/mach/arch.h>
  44#include <asm/mach/flash.h>
  45#include <asm/mach/map.h>
  46#include <linux/platform_data/irda-sa11x0.h>
  47
  48#include <asm/hardware/scoop.h>
  49#include <asm/mach/sharpsl_param.h>
  50#include <asm/hardware/locomo.h>
  51#include <linux/platform_data/mfd-mcp-sa11x0.h>
  52#include <mach/irqs.h>
  53
  54#include "generic.h"
  55
  56static struct resource collie_scoop_resources[] = {
  57        [0] = DEFINE_RES_MEM(0x40800000, SZ_4K),
  58};
  59
  60static struct scoop_config collie_scoop_setup = {
  61        .io_dir         = COLLIE_SCOOP_IO_DIR,
  62        .io_out         = COLLIE_SCOOP_IO_OUT,
  63        .gpio_base      = COLLIE_SCOOP_GPIO_BASE,
  64};
  65
  66struct platform_device colliescoop_device = {
  67        .name           = "sharp-scoop",
  68        .id             = -1,
  69        .dev            = {
  70                .platform_data  = &collie_scoop_setup,
  71        },
  72        .num_resources  = ARRAY_SIZE(collie_scoop_resources),
  73        .resource       = collie_scoop_resources,
  74};
  75
  76static struct scoop_pcmcia_dev collie_pcmcia_scoop[] = {
  77        {
  78        .dev            = &colliescoop_device.dev,
  79        .irq            = COLLIE_IRQ_GPIO_CF_IRQ,
  80        .cd_irq         = COLLIE_IRQ_GPIO_CF_CD,
  81        .cd_irq_str     = "PCMCIA0 CD",
  82        },
  83};
  84
  85static struct scoop_pcmcia_config collie_pcmcia_config = {
  86        .devs           = &collie_pcmcia_scoop[0],
  87        .num_devs       = 1,
  88};
  89
  90static struct ucb1x00_plat_data collie_ucb1x00_data = {
  91        .gpio_base      = COLLIE_TC35143_GPIO_BASE,
  92};
  93
  94static struct mcp_plat_data collie_mcp_data = {
  95        .mccr0          = MCCR0_ADM | MCCR0_ExtClk,
  96        .sclk_rate      = 9216000,
  97        .codec_pdata    = &collie_ucb1x00_data,
  98};
  99
 100static int collie_ir_startup(struct device *dev)
 101{
 102        int rc = gpio_request(COLLIE_GPIO_IR_ON, "IrDA");
 103        if (rc)
 104                return rc;
 105        rc = gpio_direction_output(COLLIE_GPIO_IR_ON, 1);
 106
 107        if (!rc)
 108                return 0;
 109
 110        gpio_free(COLLIE_GPIO_IR_ON);
 111        return rc;
 112}
 113
 114static void collie_ir_shutdown(struct device *dev)
 115{
 116        gpio_free(COLLIE_GPIO_IR_ON);
 117}
 118
 119static int collie_ir_set_power(struct device *dev, unsigned int state)
 120{
 121        gpio_set_value(COLLIE_GPIO_IR_ON, !state);
 122        return 0;
 123}
 124
 125static struct irda_platform_data collie_ir_data = {
 126        .startup = collie_ir_startup,
 127        .shutdown = collie_ir_shutdown,
 128        .set_power = collie_ir_set_power,
 129};
 130
 131/*
 132 * Collie AC IN
 133 */
 134static char *collie_ac_supplied_to[] = {
 135        "main-battery",
 136        "backup-battery",
 137};
 138
 139
 140static struct gpio_charger_platform_data collie_power_data = {
 141        .name                   = "charger",
 142        .type                   = POWER_SUPPLY_TYPE_MAINS,
 143        .gpio                   = COLLIE_GPIO_AC_IN,
 144        .supplied_to            = collie_ac_supplied_to,
 145        .num_supplicants        = ARRAY_SIZE(collie_ac_supplied_to),
 146};
 147
 148static struct platform_device collie_power_device = {
 149        .name                   = "gpio-charger",
 150        .id                     = -1,
 151        .dev.platform_data      = &collie_power_data,
 152};
 153
 154#ifdef CONFIG_SHARP_LOCOMO
 155/*
 156 * low-level UART features.
 157 */
 158struct platform_device collie_locomo_device;
 159
 160static void collie_uart_set_mctrl(struct uart_port *port, u_int mctrl)
 161{
 162        if (mctrl & TIOCM_RTS)
 163                locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 0);
 164        else
 165                locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 1);
 166
 167        if (mctrl & TIOCM_DTR)
 168                locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 0);
 169        else
 170                locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 1);
 171}
 172
 173static u_int collie_uart_get_mctrl(struct uart_port *port)
 174{
 175        int ret = TIOCM_CD;
 176        unsigned int r;
 177
 178        r = locomo_gpio_read_output(&collie_locomo_device.dev, LOCOMO_GPIO_CTS & LOCOMO_GPIO_DSR);
 179        if (r == -ENODEV)
 180                return ret;
 181        if (r & LOCOMO_GPIO_CTS)
 182                ret |= TIOCM_CTS;
 183        if (r & LOCOMO_GPIO_DSR)
 184                ret |= TIOCM_DSR;
 185
 186        return ret;
 187}
 188
 189static struct sa1100_port_fns collie_port_fns __initdata = {
 190        .set_mctrl      = collie_uart_set_mctrl,
 191        .get_mctrl      = collie_uart_get_mctrl,
 192};
 193
 194static int collie_uart_probe(struct locomo_dev *dev)
 195{
 196        return 0;
 197}
 198
 199static int collie_uart_remove(struct locomo_dev *dev)
 200{
 201        return 0;
 202}
 203
 204static struct locomo_driver collie_uart_driver = {
 205        .drv = {
 206                .name = "collie_uart",
 207        },
 208        .devid  = LOCOMO_DEVID_UART,
 209        .probe  = collie_uart_probe,
 210        .remove = collie_uart_remove,
 211};
 212
 213static int __init collie_uart_init(void)
 214{
 215        return locomo_driver_register(&collie_uart_driver);
 216}
 217device_initcall(collie_uart_init);
 218
 219#endif
 220
 221
 222static struct resource locomo_resources[] = {
 223        [0] = DEFINE_RES_MEM(0x40000000, SZ_8K),
 224        [1] = DEFINE_RES_IRQ(IRQ_GPIO25),
 225};
 226
 227static struct locomo_platform_data locomo_info = {
 228        .irq_base       = IRQ_BOARD_START,
 229};
 230
 231struct platform_device collie_locomo_device = {
 232        .name           = "locomo",
 233        .id             = 0,
 234        .dev            = {
 235                .platform_data  = &locomo_info,
 236        },
 237        .num_resources  = ARRAY_SIZE(locomo_resources),
 238        .resource       = locomo_resources,
 239};
 240
 241static struct gpio_keys_button collie_gpio_keys[] = {
 242        {
 243                .type   = EV_PWR,
 244                .code   = KEY_RESERVED,
 245                .gpio   = COLLIE_GPIO_ON_KEY,
 246                .desc   = "On key",
 247                .wakeup = 1,
 248                .active_low = 1,
 249        },
 250        {
 251                .type   = EV_PWR,
 252                .code   = KEY_WAKEUP,
 253                .gpio   = COLLIE_GPIO_WAKEUP,
 254                .desc   = "Sync",
 255                .wakeup = 1,
 256                .active_low = 1,
 257        },
 258};
 259
 260static struct gpio_keys_platform_data collie_gpio_keys_data = {
 261        .buttons        = collie_gpio_keys,
 262        .nbuttons       = ARRAY_SIZE(collie_gpio_keys),
 263};
 264
 265static struct platform_device collie_gpio_keys_device = {
 266        .name   = "gpio-keys",
 267        .id     = -1,
 268        .dev    = {
 269                .platform_data = &collie_gpio_keys_data,
 270        },
 271};
 272
 273static struct platform_device *devices[] __initdata = {
 274        &collie_locomo_device,
 275        &colliescoop_device,
 276        &collie_power_device,
 277        &collie_gpio_keys_device,
 278};
 279
 280static struct mtd_partition collie_partitions[] = {
 281        {
 282                .name           = "bootloader",
 283                .offset         = 0,
 284                .size           = 0x000C0000,
 285                .mask_flags     = MTD_WRITEABLE
 286        }, {
 287                .name           = "kernel",
 288                .offset         = MTDPART_OFS_APPEND,
 289                .size           = 0x00100000,
 290        }, {
 291                .name           = "rootfs",
 292                .offset         = MTDPART_OFS_APPEND,
 293                .size           = 0x00e20000,
 294        }, {
 295                .name           = "bootblock",
 296                .offset         = MTDPART_OFS_APPEND,
 297                .size           = 0x00020000,
 298                .mask_flags     = MTD_WRITEABLE
 299        }
 300};
 301
 302static int collie_flash_init(void)
 303{
 304        int rc = gpio_request(COLLIE_GPIO_VPEN, "flash Vpp enable");
 305        if (rc)
 306                return rc;
 307
 308        rc = gpio_direction_output(COLLIE_GPIO_VPEN, 1);
 309        if (rc)
 310                gpio_free(COLLIE_GPIO_VPEN);
 311
 312        return rc;
 313}
 314
 315static void collie_set_vpp(int vpp)
 316{
 317        gpio_set_value(COLLIE_GPIO_VPEN, vpp);
 318}
 319
 320static void collie_flash_exit(void)
 321{
 322        gpio_free(COLLIE_GPIO_VPEN);
 323}
 324
 325static struct flash_platform_data collie_flash_data = {
 326        .map_name       = "cfi_probe",
 327        .init           = collie_flash_init,
 328        .set_vpp        = collie_set_vpp,
 329        .exit           = collie_flash_exit,
 330        .parts          = collie_partitions,
 331        .nr_parts       = ARRAY_SIZE(collie_partitions),
 332};
 333
 334static struct resource collie_flash_resources[] = {
 335        DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M),
 336};
 337
 338static struct sa1100fb_mach_info collie_lcd_info = {
 339        .pixclock       = 171521,       .bpp            = 16,
 340        .xres           = 320,          .yres           = 240,
 341
 342        .hsync_len      = 5,            .vsync_len      = 1,
 343        .left_margin    = 11,           .upper_margin   = 2,
 344        .right_margin   = 30,           .lower_margin   = 0,
 345
 346        .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 347
 348        .lccr0          = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
 349        .lccr3          = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
 350
 351#ifdef CONFIG_BACKLIGHT_LOCOMO
 352        .lcd_power      = locomolcd_power
 353#endif
 354};
 355
 356static void __init collie_init(void)
 357{
 358        int ret = 0;
 359
 360        /* cpu initialize */
 361        GAFR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK |
 362                GPIO_MCP_CLK | GPIO_32_768kHz;
 363
 364        GPDR = GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 |
 365                GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD |
 366                GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK |
 367                _COLLIE_GPIO_UCB1x00_RESET | _COLLIE_GPIO_nMIC_ON |
 368                _COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz;
 369
 370        PPDR = PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 |
 371                PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS |
 372                PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM;
 373
 374        PWER = 0;
 375
 376        PGSR = _COLLIE_GPIO_nREMOCON_ON;
 377
 378        PSDR = PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4;
 379
 380        PCFR = PCFR_OPDE;
 381
 382        GPSR |= _COLLIE_GPIO_UCB1x00_RESET;
 383
 384        sa11x0_ppc_configure_mcp();
 385
 386
 387        platform_scoop_config = &collie_pcmcia_config;
 388
 389        ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 390        if (ret) {
 391                printk(KERN_WARNING "collie: Unable to register LoCoMo device\n");
 392        }
 393
 394        sa11x0_register_lcd(&collie_lcd_info);
 395        sa11x0_register_mtd(&collie_flash_data, collie_flash_resources,
 396                            ARRAY_SIZE(collie_flash_resources));
 397        sa11x0_register_mcp(&collie_mcp_data);
 398        sa11x0_register_irda(&collie_ir_data);
 399
 400        sharpsl_save_param();
 401}
 402
 403static struct map_desc collie_io_desc[] __initdata = {
 404        {       /* 32M main flash (cs0) */
 405                .virtual        = 0xe8000000,
 406                .pfn            = __phys_to_pfn(0x00000000),
 407                .length         = 0x02000000,
 408                .type           = MT_DEVICE
 409        }, {    /* 32M boot flash (cs1) */
 410                .virtual        = 0xea000000,
 411                .pfn            = __phys_to_pfn(0x08000000),
 412                .length         = 0x02000000,
 413                .type           = MT_DEVICE
 414        }
 415};
 416
 417static void __init collie_map_io(void)
 418{
 419        sa1100_map_io();
 420        iotable_init(collie_io_desc, ARRAY_SIZE(collie_io_desc));
 421
 422#ifdef CONFIG_SHARP_LOCOMO
 423        sa1100_register_uart_fns(&collie_port_fns);
 424#endif
 425        sa1100_register_uart(0, 3);
 426        sa1100_register_uart(1, 1);
 427}
 428
 429MACHINE_START(COLLIE, "Sharp-Collie")
 430        .map_io         = collie_map_io,
 431        .nr_irqs        = SA1100_NR_IRQS,
 432        .init_irq       = sa1100_init_irq,
 433        .init_time      = sa1100_timer_init,
 434        .init_machine   = collie_init,
 435        .init_late      = sa11x0_init_late,
 436        .restart        = sa11x0_restart,
 437MACHINE_END
 438