// SPDX-License-Identifier: GPL-2.0+
//
// Copyright 2008 Openmoko, Inc.
// Copyright 2008 Simtec Electronics
//      Ben Dooks <ben@simtec.co.uk>
//      http://armlinux.simtec.co.uk/
//
// S3C series GPIO PM code

#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/gpio.h>

#include <mach/gpio-samsung.h>

#include <plat/gpio-core.h>
#include <plat/pm.h>

/* PM GPIO helpers */

#define OFFS_CON        (0x00)
#define OFFS_DAT        (0x04)
#define OFFS_UP         (0x08)

static void samsung_gpio_pm_1bit_save(struct samsung_gpio_chip *chip)
{
        chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
        chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
}

static void samsung_gpio_pm_1bit_resume(struct samsung_gpio_chip *chip)
{
        void __iomem *base = chip->base;
        u32 old_gpcon = __raw_readl(base + OFFS_CON);
        u32 old_gpdat = __raw_readl(base + OFFS_DAT);
        u32 gps_gpcon = chip->pm_save[0];
        u32 gps_gpdat = chip->pm_save[1];
        u32 gpcon;

        /* GPACON only has one bit per control / data and no PULLUPs.
         * GPACON[x] = 0 => Output, 1 => SFN */

        /* first set all SFN bits to SFN */

        gpcon = old_gpcon | gps_gpcon;
        __raw_writel(gpcon, base + OFFS_CON);

        /* now set all the other bits */

        __raw_writel(gps_gpdat, base + OFFS_DAT);
        __raw_writel(gps_gpcon, base + OFFS_CON);

        S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
                  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
}

struct samsung_gpio_pm samsung_gpio_pm_1bit = {
        .save   = samsung_gpio_pm_1bit_save,
        .resume = samsung_gpio_pm_1bit_resume,
};

static void samsung_gpio_pm_2bit_save(struct samsung_gpio_chip *chip)
{
        chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
        chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
        chip->pm_save[2] = __raw_readl(chip->base + OFFS_UP);
}

/* Test whether the given masked+shifted bits of an GPIO configuration
 * are one of the SFN (special function) modes. */

static inline int is_sfn(unsigned long con)
{
        return con >= 2;
}

/* Test if the given masked+shifted GPIO configuration is an input */

static inline int is_in(unsigned long con)
{
        return con == 0;
}

/* Test if the given masked+shifted GPIO configuration is an output */

static inline int is_out(unsigned long con)
{
        return con == 1;
}

/**
 * samsung_gpio_pm_2bit_resume() - restore the given GPIO bank
 * @chip: The chip information to resume.
 *
 * Restore one of the GPIO banks that was saved during suspend. This is
 * not as simple as once thought, due to the possibility of glitches
 * from the order that the CON and DAT registers are set in.
 *
 * The three states the pin can be are {IN,OUT,SFN} which gives us 9
 * combinations of changes to check. Three of these, if the pin stays
 * in the same configuration can be discounted. This leaves us with
 * the following:
 *
 * { IN => OUT }  Change DAT first
 * { IN => SFN }  Change CON first
 * { OUT => SFN } Change CON first, so new data will not glitch
 * { OUT => IN }  Change CON first, so new data will not glitch
 * { SFN => IN }  Change CON first
 * { SFN => OUT } Change DAT first, so new data will not glitch [1]
 *
 * We do not currently deal with the UP registers as these control
 * weak resistors, so a small delay in change should not need to bring
 * these into the calculations.
 *
 * [1] this assumes that writing to a pin DAT whilst in SFN will set the
 *     state for when it is next output.
 */
static void samsung_gpio_pm_2bit_resume(struct samsung_gpio_chip *chip)
{
        void __iomem *base = chip->base;
        u32 old_gpcon = __raw_readl(base + OFFS_CON);
        u32 old_gpdat = __raw_readl(base + OFFS_DAT);
        u32 gps_gpcon = chip->pm_save[0];
        u32 gps_gpdat = chip->pm_save[1];
        u32 gpcon, old, new, mask;
        u32 change_mask = 0x0;
        int nr;

        /* restore GPIO pull-up settings */
        __raw_writel(chip->pm_save[2], base + OFFS_UP);

        /* Create a change_mask of all the items that need to have
         * their CON value changed before their DAT value, so that
         * we minimise the work between the two settings.
         */

        for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
                old = (old_gpcon & mask) >> nr;
                new = (gps_gpcon & mask) >> nr;

                /* If there is no change, then skip */

                if (old == new)
                        continue;

                /* If both are special function, then skip */

                if (is_sfn(old) && is_sfn(new))
                        continue;

                /* Change is IN => OUT, do not change now */

                if (is_in(old) && is_out(new))
                        continue;

                /* Change is SFN => OUT, do not change now */

                if (is_sfn(old) && is_out(new))
                        continue;

                /* We should now be at the case of IN=>SFN,
                 * OUT=>SFN, OUT=>IN, SFN=>IN. */

                change_mask |= mask;
        }


        /* Write the new CON settings */

        gpcon = old_gpcon & ~change_mask;
        gpcon |= gps_gpcon & change_mask;

        __raw_writel(gpcon, base + OFFS_CON);

        /* Now change any items that require DAT,CON */

        __raw_writel(gps_gpdat, base + OFFS_DAT);
        __raw_writel(gps_gpcon, base + OFFS_CON);

        S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
                  chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
}

struct samsung_gpio_pm samsung_gpio_pm_2bit = {
        .save   = samsung_gpio_pm_2bit_save,
        .resume = samsung_gpio_pm_2bit_resume,
};

#if defined(CONFIG_ARCH_S3C64XX)
static void samsung_gpio_pm_4bit_save(struct samsung_gpio_chip *chip)
{
        chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
        chip->pm_save[2] = __raw_readl(chip->base + OFFS_DAT);
        chip->pm_save[3] = __raw_readl(chip->base + OFFS_UP);

        if (chip->chip.ngpio > 8)
                chip->pm_save[0] = __raw_readl(chip->base - 4);
}

static u32 samsung_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon)
{
        u32 old, new, mask;
        u32 change_mask = 0x0;
        int nr;

        for (nr = 0, mask = 0x0f; nr < 16; nr += 4, mask <<= 4) {
                old = (old_gpcon & mask) >> nr;
                new = (gps_gpcon & mask) >> nr;

                /* If there is no change, then skip */

                if (old == new)
                        continue;

                /* If both are special function, then skip */

                if (is_sfn(old) && is_sfn(new))
                        continue;

                /* Change is IN => OUT, do not change now */

                if (is_in(old) && is_out(new))
                        continue;

                /* Change is SFN => OUT, do not change now */

                if (is_sfn(old) && is_out(new))
                        continue;

                /* We should now be at the case of IN=>SFN,
                 * OUT=>SFN, OUT=>IN, SFN=>IN. */

                change_mask |= mask;
        }

        return change_mask;
}

static void samsung_gpio_pm_4bit_con(struct samsung_gpio_chip *chip, int index)
{
        void __iomem *con = chip->base + (index * 4);
        u32 old_gpcon = __raw_readl(con);
        u32 gps_gpcon = chip->pm_save[index + 1];
        u32 gpcon, mask;

        mask = samsung_gpio_pm_4bit_mask(old_gpcon, gps_gpcon);

        gpcon = old_gpcon & ~mask;
        gpcon |= gps_gpcon & mask;

        __raw_writel(gpcon, con);
}

static void samsung_gpio_pm_4bit_resume(struct samsung_gpio_chip *chip)
{
        void __iomem *base = chip->base;
        u32 old_gpcon[2];
        u32 old_gpdat = __raw_readl(base + OFFS_DAT);
        u32 gps_gpdat = chip->pm_save[2];

        /* First, modify the CON settings */

        old_gpcon[0] = 0;
        old_gpcon[1] = __raw_readl(base + OFFS_CON);

        samsung_gpio_pm_4bit_con(chip, 0);
        if (chip->chip.ngpio > 8) {
                old_gpcon[0] = __raw_readl(base - 4);
                samsung_gpio_pm_4bit_con(chip, -1);
        }

        /* Now change the configurations that require DAT,CON */

        __raw_writel(chip->pm_save[2], base + OFFS_DAT);
        __raw_writel(chip->pm_save[1], base + OFFS_CON);
        if (chip->chip.ngpio > 8)
                __raw_writel(chip->pm_save[0], base - 4);

        __raw_writel(chip->pm_save[2], base + OFFS_DAT);
        __raw_writel(chip->pm_save[3], base + OFFS_UP);

        if (chip->chip.ngpio > 8) {
                S3C_PMDBG("%s: CON4 %08x,%08x => %08x,%08x, DAT %08x => %08x\n",
                          chip->chip.label, old_gpcon[0], old_gpcon[1],
                          __raw_readl(base - 4),
                          __raw_readl(base + OFFS_CON),
                          old_gpdat, gps_gpdat);
        } else
                S3C_PMDBG("%s: CON4 %08x => %08x, DAT %08x => %08x\n",
                          chip->chip.label, old_gpcon[1],
                          __raw_readl(base + OFFS_CON),
                          old_gpdat, gps_gpdat);
}

struct samsung_gpio_pm samsung_gpio_pm_4bit = {
        .save   = samsung_gpio_pm_4bit_save,
        .resume = samsung_gpio_pm_4bit_resume,
};
#endif /* CONFIG_ARCH_S3C64XX */

/**
 * samsung_pm_save_gpio() - save gpio chip data for suspend
 * @ourchip: The chip for suspend.
 */
static void samsung_pm_save_gpio(struct samsung_gpio_chip *ourchip)
{
        struct samsung_gpio_pm *pm = ourchip->pm;

        if (pm == NULL || pm->save == NULL)
                S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
        else
                pm->save(ourchip);
}

/**
 * samsung_pm_save_gpios() - Save the state of the GPIO banks.
 *
 * For all the GPIO banks, save the state of each one ready for going
 * into a suspend mode.
 */
void samsung_pm_save_gpios(void)
{
        struct samsung_gpio_chip *ourchip;
        unsigned int gpio_nr;

        for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) {
                ourchip = samsung_gpiolib_getchip(gpio_nr);
                if (!ourchip) {
                        gpio_nr++;
                        continue;
                }

                samsung_pm_save_gpio(ourchip);

                S3C_PMDBG("%s: save %08x,%08x,%08x,%08x\n",
                          ourchip->chip.label,
                          ourchip->pm_save[0],
                          ourchip->pm_save[1],
                          ourchip->pm_save[2],
                          ourchip->pm_save[3]);

                gpio_nr += ourchip->chip.ngpio;
                gpio_nr += CONFIG_S3C_GPIO_SPACE;
        }
}

/**
 * samsung_pm_resume_gpio() - restore gpio chip data after suspend
 * @ourchip: The suspended chip.
 */
static void samsung_pm_resume_gpio(struct samsung_gpio_chip *ourchip)
{
        struct samsung_gpio_pm *pm = ourchip->pm;

        if (pm == NULL || pm->resume == NULL)
                S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
        else
                pm->resume(ourchip);
}

void samsung_pm_restore_gpios(void)
{
        struct samsung_gpio_chip *ourchip;
        unsigned int gpio_nr;

        for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) {
                ourchip = samsung_gpiolib_getchip(gpio_nr);
                if (!ourchip) {
                        gpio_nr++;
                        continue;
                }

                samsung_pm_resume_gpio(ourchip);

                gpio_nr += ourchip->chip.ngpio;
                gpio_nr += CONFIG_S3C_GPIO_SPACE;
        }
}