linux/arch/mips/alchemy/common/irq.c
<<
>>
Prefs
   1/*
   2 * Copyright 2001, 2007-2008 MontaVista Software Inc.
   3 * Author: MontaVista Software, Inc. <source@mvista.com>
   4 *
   5 * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
   6 *
   7 *  This program is free software; you can redistribute  it and/or modify it
   8 *  under  the terms of  the GNU General  Public License as published by the
   9 *  Free Software Foundation;  either version 2 of the  License, or (at your
  10 *  option) any later version.
  11 *
  12 *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
  13 *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
  14 *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
  15 *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
  16 *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  17 *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
  18 *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
  19 *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
  20 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  21 *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  22 *
  23 *  You should have received a copy of the  GNU General Public License along
  24 *  with this program; if not, write  to the Free Software Foundation, Inc.,
  25 *  675 Mass Ave, Cambridge, MA 02139, USA.
  26 */
  27
  28#include <linux/export.h>
  29#include <linux/init.h>
  30#include <linux/interrupt.h>
  31#include <linux/slab.h>
  32#include <linux/syscore_ops.h>
  33
  34#include <asm/irq_cpu.h>
  35#include <asm/mach-au1x00/au1000.h>
  36#include <asm/mach-au1x00/gpio-au1300.h>
  37
  38/* Interrupt Controller register offsets */
  39#define IC_CFG0RD       0x40
  40#define IC_CFG0SET      0x40
  41#define IC_CFG0CLR      0x44
  42#define IC_CFG1RD       0x48
  43#define IC_CFG1SET      0x48
  44#define IC_CFG1CLR      0x4C
  45#define IC_CFG2RD       0x50
  46#define IC_CFG2SET      0x50
  47#define IC_CFG2CLR      0x54
  48#define IC_REQ0INT      0x54
  49#define IC_SRCRD        0x58
  50#define IC_SRCSET       0x58
  51#define IC_SRCCLR       0x5C
  52#define IC_REQ1INT      0x5C
  53#define IC_ASSIGNRD     0x60
  54#define IC_ASSIGNSET    0x60
  55#define IC_ASSIGNCLR    0x64
  56#define IC_WAKERD       0x68
  57#define IC_WAKESET      0x68
  58#define IC_WAKECLR      0x6C
  59#define IC_MASKRD       0x70
  60#define IC_MASKSET      0x70
  61#define IC_MASKCLR      0x74
  62#define IC_RISINGRD     0x78
  63#define IC_RISINGCLR    0x78
  64#define IC_FALLINGRD    0x7C
  65#define IC_FALLINGCLR   0x7C
  66#define IC_TESTBIT      0x80
  67
  68/* per-processor fixed function irqs */
  69struct alchemy_irqmap {
  70        int irq;        /* linux IRQ number */
  71        int type;       /* IRQ_TYPE_ */
  72        int prio;       /* irq priority, 0 highest, 3 lowest */
  73        int internal;   /* GPIC: internal source (no ext. pin)? */
  74};
  75
  76static int au1x_ic_settype(struct irq_data *d, unsigned int type);
  77static int au1300_gpic_settype(struct irq_data *d, unsigned int type);
  78
  79
  80/* NOTE on interrupt priorities: The original writers of this code said:
  81 *
  82 * Because of the tight timing of SETUP token to reply transactions,
  83 * the USB devices-side packet complete interrupt (USB_DEV_REQ_INT)
  84 * needs the highest priority.
  85 */
  86struct alchemy_irqmap au1000_irqmap[] __initdata = {
  87        { AU1000_UART0_INT,       IRQ_TYPE_LEVEL_HIGH,  1, 0 },
  88        { AU1000_UART1_INT,       IRQ_TYPE_LEVEL_HIGH,  1, 0 },
  89        { AU1000_UART2_INT,       IRQ_TYPE_LEVEL_HIGH,  1, 0 },
  90        { AU1000_UART3_INT,       IRQ_TYPE_LEVEL_HIGH,  1, 0 },
  91        { AU1000_SSI0_INT,        IRQ_TYPE_LEVEL_HIGH,  1, 0 },
  92        { AU1000_SSI1_INT,        IRQ_TYPE_LEVEL_HIGH,  1, 0 },
  93        { AU1000_DMA_INT_BASE,    IRQ_TYPE_LEVEL_HIGH,  1, 0 },
  94        { AU1000_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
  95        { AU1000_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
  96        { AU1000_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
  97        { AU1000_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
  98        { AU1000_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
  99        { AU1000_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 100        { AU1000_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 101        { AU1000_TOY_INT,         IRQ_TYPE_EDGE_RISING, 1, 0 },
 102        { AU1000_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 103        { AU1000_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 104        { AU1000_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 105        { AU1000_RTC_INT,         IRQ_TYPE_EDGE_RISING, 1, 0 },
 106        { AU1000_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 107        { AU1000_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 108        { AU1000_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
 109        { AU1000_IRDA_TX_INT,     IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 110        { AU1000_IRDA_RX_INT,     IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 111        { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  0, 0 },
 112        { AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
 113        { AU1000_USB_HOST_INT,    IRQ_TYPE_LEVEL_LOW,   1, 0 },
 114        { AU1000_ACSYNC_INT,      IRQ_TYPE_EDGE_RISING, 1, 0 },
 115        { AU1000_MAC0_DMA_INT,    IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 116        { AU1000_MAC1_DMA_INT,    IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 117        { AU1000_AC97C_INT,       IRQ_TYPE_EDGE_RISING, 1, 0 },
 118        { -1, },
 119};
 120
 121struct alchemy_irqmap au1500_irqmap[] __initdata = {
 122        { AU1500_UART0_INT,       IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 123        { AU1500_PCI_INTA,        IRQ_TYPE_LEVEL_LOW,   1, 0 },
 124        { AU1500_PCI_INTB,        IRQ_TYPE_LEVEL_LOW,   1, 0 },
 125        { AU1500_UART3_INT,       IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 126        { AU1500_PCI_INTC,        IRQ_TYPE_LEVEL_LOW,   1, 0 },
 127        { AU1500_PCI_INTD,        IRQ_TYPE_LEVEL_LOW,   1, 0 },
 128        { AU1500_DMA_INT_BASE,    IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 129        { AU1500_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 130        { AU1500_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 131        { AU1500_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 132        { AU1500_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 133        { AU1500_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 134        { AU1500_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 135        { AU1500_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 136        { AU1500_TOY_INT,         IRQ_TYPE_EDGE_RISING, 1, 0 },
 137        { AU1500_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 138        { AU1500_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 139        { AU1500_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 140        { AU1500_RTC_INT,         IRQ_TYPE_EDGE_RISING, 1, 0 },
 141        { AU1500_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 142        { AU1500_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 143        { AU1500_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
 144        { AU1500_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  0, 0 },
 145        { AU1500_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
 146        { AU1500_USB_HOST_INT,    IRQ_TYPE_LEVEL_LOW,   1, 0 },
 147        { AU1500_ACSYNC_INT,      IRQ_TYPE_EDGE_RISING, 1, 0 },
 148        { AU1500_MAC0_DMA_INT,    IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 149        { AU1500_MAC1_DMA_INT,    IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 150        { AU1500_AC97C_INT,       IRQ_TYPE_EDGE_RISING, 1, 0 },
 151        { -1, },
 152};
 153
 154struct alchemy_irqmap au1100_irqmap[] __initdata = {
 155        { AU1100_UART0_INT,       IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 156        { AU1100_UART1_INT,       IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 157        { AU1100_SD_INT,          IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 158        { AU1100_UART3_INT,       IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 159        { AU1100_SSI0_INT,        IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 160        { AU1100_SSI1_INT,        IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 161        { AU1100_DMA_INT_BASE,    IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 162        { AU1100_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 163        { AU1100_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 164        { AU1100_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 165        { AU1100_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 166        { AU1100_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 167        { AU1100_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 168        { AU1100_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 169        { AU1100_TOY_INT,         IRQ_TYPE_EDGE_RISING, 1, 0 },
 170        { AU1100_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 171        { AU1100_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 172        { AU1100_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 173        { AU1100_RTC_INT,         IRQ_TYPE_EDGE_RISING, 1, 0 },
 174        { AU1100_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 175        { AU1100_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 176        { AU1100_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
 177        { AU1100_IRDA_TX_INT,     IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 178        { AU1100_IRDA_RX_INT,     IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 179        { AU1100_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  0, 0 },
 180        { AU1100_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
 181        { AU1100_USB_HOST_INT,    IRQ_TYPE_LEVEL_LOW,   1, 0 },
 182        { AU1100_ACSYNC_INT,      IRQ_TYPE_EDGE_RISING, 1, 0 },
 183        { AU1100_MAC0_DMA_INT,    IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 184        { AU1100_LCD_INT,         IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 185        { AU1100_AC97C_INT,       IRQ_TYPE_EDGE_RISING, 1, 0 },
 186        { -1, },
 187};
 188
 189struct alchemy_irqmap au1550_irqmap[] __initdata = {
 190        { AU1550_UART0_INT,       IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 191        { AU1550_PCI_INTA,        IRQ_TYPE_LEVEL_LOW,   1, 0 },
 192        { AU1550_PCI_INTB,        IRQ_TYPE_LEVEL_LOW,   1, 0 },
 193        { AU1550_DDMA_INT,        IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 194        { AU1550_CRYPTO_INT,      IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 195        { AU1550_PCI_INTC,        IRQ_TYPE_LEVEL_LOW,   1, 0 },
 196        { AU1550_PCI_INTD,        IRQ_TYPE_LEVEL_LOW,   1, 0 },
 197        { AU1550_PCI_RST_INT,     IRQ_TYPE_LEVEL_LOW,   1, 0 },
 198        { AU1550_UART1_INT,       IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 199        { AU1550_UART3_INT,       IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 200        { AU1550_PSC0_INT,        IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 201        { AU1550_PSC1_INT,        IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 202        { AU1550_PSC2_INT,        IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 203        { AU1550_PSC3_INT,        IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 204        { AU1550_TOY_INT,         IRQ_TYPE_EDGE_RISING, 1, 0 },
 205        { AU1550_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 206        { AU1550_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 207        { AU1550_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 208        { AU1550_RTC_INT,         IRQ_TYPE_EDGE_RISING, 1, 0 },
 209        { AU1550_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 210        { AU1550_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 211        { AU1550_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
 212        { AU1550_NAND_INT,        IRQ_TYPE_EDGE_RISING, 1, 0 },
 213        { AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  0, 0 },
 214        { AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
 215        { AU1550_USB_HOST_INT,    IRQ_TYPE_LEVEL_LOW,   1, 0 },
 216        { AU1550_MAC0_DMA_INT,    IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 217        { AU1550_MAC1_DMA_INT,    IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 218        { -1, },
 219};
 220
 221struct alchemy_irqmap au1200_irqmap[] __initdata = {
 222        { AU1200_UART0_INT,       IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 223        { AU1200_SWT_INT,         IRQ_TYPE_EDGE_RISING, 1, 0 },
 224        { AU1200_SD_INT,          IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 225        { AU1200_DDMA_INT,        IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 226        { AU1200_MAE_BE_INT,      IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 227        { AU1200_UART1_INT,       IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 228        { AU1200_MAE_FE_INT,      IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 229        { AU1200_PSC0_INT,        IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 230        { AU1200_PSC1_INT,        IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 231        { AU1200_AES_INT,         IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 232        { AU1200_CAMERA_INT,      IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 233        { AU1200_TOY_INT,         IRQ_TYPE_EDGE_RISING, 1, 0 },
 234        { AU1200_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 235        { AU1200_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 236        { AU1200_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 237        { AU1200_RTC_INT,         IRQ_TYPE_EDGE_RISING, 1, 0 },
 238        { AU1200_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 239        { AU1200_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
 240        { AU1200_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
 241        { AU1200_NAND_INT,        IRQ_TYPE_EDGE_RISING, 1, 0 },
 242        { AU1200_USB_INT,         IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 243        { AU1200_LCD_INT,         IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 244        { AU1200_MAE_BOTH_INT,    IRQ_TYPE_LEVEL_HIGH,  1, 0 },
 245        { -1, },
 246};
 247
 248static struct alchemy_irqmap au1300_irqmap[] __initdata = {
 249        /* multifunction: gpio pin or device */
 250        { AU1300_UART1_INT,      IRQ_TYPE_LEVEL_HIGH,   1, 0, },
 251        { AU1300_UART2_INT,      IRQ_TYPE_LEVEL_HIGH,   1, 0, },
 252        { AU1300_UART3_INT,      IRQ_TYPE_LEVEL_HIGH,   1, 0, },
 253        { AU1300_SD1_INT,        IRQ_TYPE_LEVEL_HIGH,   1, 0, },
 254        { AU1300_SD2_INT,        IRQ_TYPE_LEVEL_HIGH,   1, 0, },
 255        { AU1300_PSC0_INT,       IRQ_TYPE_LEVEL_HIGH,   1, 0, },
 256        { AU1300_PSC1_INT,       IRQ_TYPE_LEVEL_HIGH,   1, 0, },
 257        { AU1300_PSC2_INT,       IRQ_TYPE_LEVEL_HIGH,   1, 0, },
 258        { AU1300_PSC3_INT,       IRQ_TYPE_LEVEL_HIGH,   1, 0, },
 259        { AU1300_NAND_INT,       IRQ_TYPE_LEVEL_HIGH,   1, 0, },
 260        /* au1300 internal */
 261        { AU1300_DDMA_INT,       IRQ_TYPE_LEVEL_HIGH,   1, 1, },
 262        { AU1300_MMU_INT,        IRQ_TYPE_LEVEL_HIGH,   1, 1, },
 263        { AU1300_MPU_INT,        IRQ_TYPE_LEVEL_HIGH,   1, 1, },
 264        { AU1300_GPU_INT,        IRQ_TYPE_LEVEL_HIGH,   1, 1, },
 265        { AU1300_UDMA_INT,       IRQ_TYPE_LEVEL_HIGH,   1, 1, },
 266        { AU1300_TOY_INT,        IRQ_TYPE_EDGE_RISING,  1, 1, },
 267        { AU1300_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING,  1, 1, },
 268        { AU1300_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING,  1, 1, },
 269        { AU1300_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING,  1, 1, },
 270        { AU1300_RTC_INT,        IRQ_TYPE_EDGE_RISING,  1, 1, },
 271        { AU1300_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING,  1, 1, },
 272        { AU1300_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING,  1, 1, },
 273        { AU1300_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING,  0, 1, },
 274        { AU1300_UART0_INT,      IRQ_TYPE_LEVEL_HIGH,   1, 1, },
 275        { AU1300_SD0_INT,        IRQ_TYPE_LEVEL_HIGH,   1, 1, },
 276        { AU1300_USB_INT,        IRQ_TYPE_LEVEL_HIGH,   1, 1, },
 277        { AU1300_LCD_INT,        IRQ_TYPE_LEVEL_HIGH,   1, 1, },
 278        { AU1300_BSA_INT,        IRQ_TYPE_LEVEL_HIGH,   1, 1, },
 279        { AU1300_MPE_INT,        IRQ_TYPE_EDGE_RISING,  1, 1, },
 280        { AU1300_ITE_INT,        IRQ_TYPE_LEVEL_HIGH,   1, 1, },
 281        { AU1300_AES_INT,        IRQ_TYPE_LEVEL_HIGH,   1, 1, },
 282        { AU1300_CIM_INT,        IRQ_TYPE_LEVEL_HIGH,   1, 1, },
 283        { -1, },        /* terminator */
 284};
 285
 286/******************************************************************************/
 287
 288static void au1x_ic0_unmask(struct irq_data *d)
 289{
 290        unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
 291        void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
 292
 293        __raw_writel(1 << bit, base + IC_MASKSET);
 294        __raw_writel(1 << bit, base + IC_WAKESET);
 295        wmb();
 296}
 297
 298static void au1x_ic1_unmask(struct irq_data *d)
 299{
 300        unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
 301        void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
 302
 303        __raw_writel(1 << bit, base + IC_MASKSET);
 304        __raw_writel(1 << bit, base + IC_WAKESET);
 305        wmb();
 306}
 307
 308static void au1x_ic0_mask(struct irq_data *d)
 309{
 310        unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
 311        void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
 312
 313        __raw_writel(1 << bit, base + IC_MASKCLR);
 314        __raw_writel(1 << bit, base + IC_WAKECLR);
 315        wmb();
 316}
 317
 318static void au1x_ic1_mask(struct irq_data *d)
 319{
 320        unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
 321        void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
 322
 323        __raw_writel(1 << bit, base + IC_MASKCLR);
 324        __raw_writel(1 << bit, base + IC_WAKECLR);
 325        wmb();
 326}
 327
 328static void au1x_ic0_ack(struct irq_data *d)
 329{
 330        unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
 331        void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
 332
 333        /*
 334         * This may assume that we don't get interrupts from
 335         * both edges at once, or if we do, that we don't care.
 336         */
 337        __raw_writel(1 << bit, base + IC_FALLINGCLR);
 338        __raw_writel(1 << bit, base + IC_RISINGCLR);
 339        wmb();
 340}
 341
 342static void au1x_ic1_ack(struct irq_data *d)
 343{
 344        unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
 345        void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
 346
 347        /*
 348         * This may assume that we don't get interrupts from
 349         * both edges at once, or if we do, that we don't care.
 350         */
 351        __raw_writel(1 << bit, base + IC_FALLINGCLR);
 352        __raw_writel(1 << bit, base + IC_RISINGCLR);
 353        wmb();
 354}
 355
 356static void au1x_ic0_maskack(struct irq_data *d)
 357{
 358        unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
 359        void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
 360
 361        __raw_writel(1 << bit, base + IC_WAKECLR);
 362        __raw_writel(1 << bit, base + IC_MASKCLR);
 363        __raw_writel(1 << bit, base + IC_RISINGCLR);
 364        __raw_writel(1 << bit, base + IC_FALLINGCLR);
 365        wmb();
 366}
 367
 368static void au1x_ic1_maskack(struct irq_data *d)
 369{
 370        unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
 371        void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
 372
 373        __raw_writel(1 << bit, base + IC_WAKECLR);
 374        __raw_writel(1 << bit, base + IC_MASKCLR);
 375        __raw_writel(1 << bit, base + IC_RISINGCLR);
 376        __raw_writel(1 << bit, base + IC_FALLINGCLR);
 377        wmb();
 378}
 379
 380static int au1x_ic1_setwake(struct irq_data *d, unsigned int on)
 381{
 382        int bit = d->irq - AU1000_INTC1_INT_BASE;
 383        unsigned long wakemsk, flags;
 384
 385        /* only GPIO 0-7 can act as wakeup source.  Fortunately these
 386         * are wired up identically on all supported variants.
 387         */
 388        if ((bit < 0) || (bit > 7))
 389                return -EINVAL;
 390
 391        local_irq_save(flags);
 392        wakemsk = alchemy_rdsys(AU1000_SYS_WAKEMSK);
 393        if (on)
 394                wakemsk |= 1 << bit;
 395        else
 396                wakemsk &= ~(1 << bit);
 397        alchemy_wrsys(wakemsk, AU1000_SYS_WAKEMSK);
 398        local_irq_restore(flags);
 399
 400        return 0;
 401}
 402
 403/*
 404 * irq_chips for both ICs; this way the mask handlers can be
 405 * as short as possible.
 406 */
 407static struct irq_chip au1x_ic0_chip = {
 408        .name           = "Alchemy-IC0",
 409        .irq_ack        = au1x_ic0_ack,
 410        .irq_mask       = au1x_ic0_mask,
 411        .irq_mask_ack   = au1x_ic0_maskack,
 412        .irq_unmask     = au1x_ic0_unmask,
 413        .irq_set_type   = au1x_ic_settype,
 414};
 415
 416static struct irq_chip au1x_ic1_chip = {
 417        .name           = "Alchemy-IC1",
 418        .irq_ack        = au1x_ic1_ack,
 419        .irq_mask       = au1x_ic1_mask,
 420        .irq_mask_ack   = au1x_ic1_maskack,
 421        .irq_unmask     = au1x_ic1_unmask,
 422        .irq_set_type   = au1x_ic_settype,
 423        .irq_set_wake   = au1x_ic1_setwake,
 424};
 425
 426static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type)
 427{
 428        struct irq_chip *chip;
 429        unsigned int bit, irq = d->irq;
 430        irq_flow_handler_t handler = NULL;
 431        unsigned char *name = NULL;
 432        void __iomem *base;
 433        int ret;
 434
 435        if (irq >= AU1000_INTC1_INT_BASE) {
 436                bit = irq - AU1000_INTC1_INT_BASE;
 437                chip = &au1x_ic1_chip;
 438                base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
 439        } else {
 440                bit = irq - AU1000_INTC0_INT_BASE;
 441                chip = &au1x_ic0_chip;
 442                base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
 443        }
 444
 445        if (bit > 31)
 446                return -EINVAL;
 447
 448        ret = 0;
 449
 450        switch (flow_type) {    /* cfgregs 2:1:0 */
 451        case IRQ_TYPE_EDGE_RISING:      /* 0:0:1 */
 452                __raw_writel(1 << bit, base + IC_CFG2CLR);
 453                __raw_writel(1 << bit, base + IC_CFG1CLR);
 454                __raw_writel(1 << bit, base + IC_CFG0SET);
 455                handler = handle_edge_irq;
 456                name = "riseedge";
 457                break;
 458        case IRQ_TYPE_EDGE_FALLING:     /* 0:1:0 */
 459                __raw_writel(1 << bit, base + IC_CFG2CLR);
 460                __raw_writel(1 << bit, base + IC_CFG1SET);
 461                __raw_writel(1 << bit, base + IC_CFG0CLR);
 462                handler = handle_edge_irq;
 463                name = "falledge";
 464                break;
 465        case IRQ_TYPE_EDGE_BOTH:        /* 0:1:1 */
 466                __raw_writel(1 << bit, base + IC_CFG2CLR);
 467                __raw_writel(1 << bit, base + IC_CFG1SET);
 468                __raw_writel(1 << bit, base + IC_CFG0SET);
 469                handler = handle_edge_irq;
 470                name = "bothedge";
 471                break;
 472        case IRQ_TYPE_LEVEL_HIGH:       /* 1:0:1 */
 473                __raw_writel(1 << bit, base + IC_CFG2SET);
 474                __raw_writel(1 << bit, base + IC_CFG1CLR);
 475                __raw_writel(1 << bit, base + IC_CFG0SET);
 476                handler = handle_level_irq;
 477                name = "hilevel";
 478                break;
 479        case IRQ_TYPE_LEVEL_LOW:        /* 1:1:0 */
 480                __raw_writel(1 << bit, base + IC_CFG2SET);
 481                __raw_writel(1 << bit, base + IC_CFG1SET);
 482                __raw_writel(1 << bit, base + IC_CFG0CLR);
 483                handler = handle_level_irq;
 484                name = "lowlevel";
 485                break;
 486        case IRQ_TYPE_NONE:             /* 0:0:0 */
 487                __raw_writel(1 << bit, base + IC_CFG2CLR);
 488                __raw_writel(1 << bit, base + IC_CFG1CLR);
 489                __raw_writel(1 << bit, base + IC_CFG0CLR);
 490                break;
 491        default:
 492                ret = -EINVAL;
 493        }
 494        irq_set_chip_handler_name_locked(d, chip, handler, name);
 495
 496        wmb();
 497
 498        return ret;
 499}
 500
 501/******************************************************************************/
 502
 503/*
 504 * au1300_gpic_chgcfg - change PIN configuration.
 505 * @gpio:       pin to change (0-based GPIO number from datasheet).
 506 * @clr:        clear all bits set in 'clr'.
 507 * @set:        set these bits.
 508 *
 509 * modifies a pins' configuration register, bits set in @clr will
 510 * be cleared in the register, bits in @set will be set.
 511 */
 512static inline void au1300_gpic_chgcfg(unsigned int gpio,
 513                                      unsigned long clr,
 514                                      unsigned long set)
 515{
 516        void __iomem *r = AU1300_GPIC_ADDR;
 517        unsigned long l;
 518
 519        r += gpio * 4;  /* offset into pin config array */
 520        l = __raw_readl(r + AU1300_GPIC_PINCFG);
 521        l &= ~clr;
 522        l |= set;
 523        __raw_writel(l, r + AU1300_GPIC_PINCFG);
 524        wmb();
 525}
 526
 527/*
 528 * au1300_pinfunc_to_gpio - assign a pin as GPIO input (GPIO ctrl).
 529 * @pin:        pin (0-based GPIO number from datasheet).
 530 *
 531 * Assigns a GPIO pin to the GPIO controller, so its level can either
 532 * be read or set through the generic GPIO functions.
 533 * If you need a GPOUT, use au1300_gpio_set_value(pin, 0/1).
 534 * REVISIT: is this function really necessary?
 535 */
 536void au1300_pinfunc_to_gpio(enum au1300_multifunc_pins gpio)
 537{
 538        au1300_gpio_direction_input(gpio + AU1300_GPIO_BASE);
 539}
 540EXPORT_SYMBOL_GPL(au1300_pinfunc_to_gpio);
 541
 542/*
 543 * au1300_pinfunc_to_dev - assign a pin to the device function.
 544 * @pin:        pin (0-based GPIO number from datasheet).
 545 *
 546 * Assigns a GPIO pin to its associated device function; the pin will be
 547 * driven by the device and not through GPIO functions.
 548 */
 549void au1300_pinfunc_to_dev(enum au1300_multifunc_pins gpio)
 550{
 551        void __iomem *r = AU1300_GPIC_ADDR;
 552        unsigned long bit;
 553
 554        r += GPIC_GPIO_BANKOFF(gpio);
 555        bit = GPIC_GPIO_TO_BIT(gpio);
 556        __raw_writel(bit, r + AU1300_GPIC_DEVSEL);
 557        wmb();
 558}
 559EXPORT_SYMBOL_GPL(au1300_pinfunc_to_dev);
 560
 561/*
 562 * au1300_set_irq_priority -  set internal priority of IRQ.
 563 * @irq:        irq to set priority (linux irq number).
 564 * @p:          priority (0 = highest, 3 = lowest).
 565 */
 566void au1300_set_irq_priority(unsigned int irq, int p)
 567{
 568        irq -= ALCHEMY_GPIC_INT_BASE;
 569        au1300_gpic_chgcfg(irq, GPIC_CFG_IL_MASK, GPIC_CFG_IL_SET(p));
 570}
 571EXPORT_SYMBOL_GPL(au1300_set_irq_priority);
 572
 573/*
 574 * au1300_set_dbdma_gpio - assign a gpio to one of the DBDMA triggers.
 575 * @dchan:      dbdma trigger select (0, 1).
 576 * @gpio:       pin to assign as trigger.
 577 *
 578 * DBDMA controller has 2 external trigger sources; this function
 579 * assigns a GPIO to the selected trigger.
 580 */
 581void au1300_set_dbdma_gpio(int dchan, unsigned int gpio)
 582{
 583        unsigned long r;
 584
 585        if ((dchan >= 0) && (dchan <= 1)) {
 586                r = __raw_readl(AU1300_GPIC_ADDR + AU1300_GPIC_DMASEL);
 587                r &= ~(0xff << (8 * dchan));
 588                r |= (gpio & 0x7f) << (8 * dchan);
 589                __raw_writel(r, AU1300_GPIC_ADDR + AU1300_GPIC_DMASEL);
 590                wmb();
 591        }
 592}
 593
 594static inline void gpic_pin_set_idlewake(unsigned int gpio, int allow)
 595{
 596        au1300_gpic_chgcfg(gpio, GPIC_CFG_IDLEWAKE,
 597                           allow ? GPIC_CFG_IDLEWAKE : 0);
 598}
 599
 600static void au1300_gpic_mask(struct irq_data *d)
 601{
 602        void __iomem *r = AU1300_GPIC_ADDR;
 603        unsigned long bit, irq = d->irq;
 604
 605        irq -= ALCHEMY_GPIC_INT_BASE;
 606        r += GPIC_GPIO_BANKOFF(irq);
 607        bit = GPIC_GPIO_TO_BIT(irq);
 608        __raw_writel(bit, r + AU1300_GPIC_IDIS);
 609        wmb();
 610
 611        gpic_pin_set_idlewake(irq, 0);
 612}
 613
 614static void au1300_gpic_unmask(struct irq_data *d)
 615{
 616        void __iomem *r = AU1300_GPIC_ADDR;
 617        unsigned long bit, irq = d->irq;
 618
 619        irq -= ALCHEMY_GPIC_INT_BASE;
 620
 621        gpic_pin_set_idlewake(irq, 1);
 622
 623        r += GPIC_GPIO_BANKOFF(irq);
 624        bit = GPIC_GPIO_TO_BIT(irq);
 625        __raw_writel(bit, r + AU1300_GPIC_IEN);
 626        wmb();
 627}
 628
 629static void au1300_gpic_maskack(struct irq_data *d)
 630{
 631        void __iomem *r = AU1300_GPIC_ADDR;
 632        unsigned long bit, irq = d->irq;
 633
 634        irq -= ALCHEMY_GPIC_INT_BASE;
 635        r += GPIC_GPIO_BANKOFF(irq);
 636        bit = GPIC_GPIO_TO_BIT(irq);
 637        __raw_writel(bit, r + AU1300_GPIC_IPEND);       /* ack */
 638        __raw_writel(bit, r + AU1300_GPIC_IDIS);        /* mask */
 639        wmb();
 640
 641        gpic_pin_set_idlewake(irq, 0);
 642}
 643
 644static void au1300_gpic_ack(struct irq_data *d)
 645{
 646        void __iomem *r = AU1300_GPIC_ADDR;
 647        unsigned long bit, irq = d->irq;
 648
 649        irq -= ALCHEMY_GPIC_INT_BASE;
 650        r += GPIC_GPIO_BANKOFF(irq);
 651        bit = GPIC_GPIO_TO_BIT(irq);
 652        __raw_writel(bit, r + AU1300_GPIC_IPEND);       /* ack */
 653        wmb();
 654}
 655
 656static struct irq_chip au1300_gpic = {
 657        .name           = "GPIOINT",
 658        .irq_ack        = au1300_gpic_ack,
 659        .irq_mask       = au1300_gpic_mask,
 660        .irq_mask_ack   = au1300_gpic_maskack,
 661        .irq_unmask     = au1300_gpic_unmask,
 662        .irq_set_type   = au1300_gpic_settype,
 663};
 664
 665static int au1300_gpic_settype(struct irq_data *d, unsigned int type)
 666{
 667        unsigned long s;
 668        unsigned char *name = NULL;
 669        irq_flow_handler_t hdl = NULL;
 670
 671        switch (type) {
 672        case IRQ_TYPE_LEVEL_HIGH:
 673                s = GPIC_CFG_IC_LEVEL_HIGH;
 674                name = "high";
 675                hdl = handle_level_irq;
 676                break;
 677        case IRQ_TYPE_LEVEL_LOW:
 678                s = GPIC_CFG_IC_LEVEL_LOW;
 679                name = "low";
 680                hdl = handle_level_irq;
 681                break;
 682        case IRQ_TYPE_EDGE_RISING:
 683                s = GPIC_CFG_IC_EDGE_RISE;
 684                name = "posedge";
 685                hdl = handle_edge_irq;
 686                break;
 687        case IRQ_TYPE_EDGE_FALLING:
 688                s = GPIC_CFG_IC_EDGE_FALL;
 689                name = "negedge";
 690                hdl = handle_edge_irq;
 691                break;
 692        case IRQ_TYPE_EDGE_BOTH:
 693                s = GPIC_CFG_IC_EDGE_BOTH;
 694                name = "bothedge";
 695                hdl = handle_edge_irq;
 696                break;
 697        case IRQ_TYPE_NONE:
 698                s = GPIC_CFG_IC_OFF;
 699                name = "disabled";
 700                hdl = handle_level_irq;
 701                break;
 702        default:
 703                return -EINVAL;
 704        }
 705
 706        irq_set_chip_handler_name_locked(d, &au1300_gpic, hdl, name);
 707
 708        au1300_gpic_chgcfg(d->irq - ALCHEMY_GPIC_INT_BASE, GPIC_CFG_IC_MASK, s);
 709
 710        return 0;
 711}
 712
 713/******************************************************************************/
 714
 715static inline void ic_init(void __iomem *base)
 716{
 717        /* initialize interrupt controller to a safe state */
 718        __raw_writel(0xffffffff, base + IC_CFG0CLR);
 719        __raw_writel(0xffffffff, base + IC_CFG1CLR);
 720        __raw_writel(0xffffffff, base + IC_CFG2CLR);
 721        __raw_writel(0xffffffff, base + IC_MASKCLR);
 722        __raw_writel(0xffffffff, base + IC_ASSIGNCLR);
 723        __raw_writel(0xffffffff, base + IC_WAKECLR);
 724        __raw_writel(0xffffffff, base + IC_SRCSET);
 725        __raw_writel(0xffffffff, base + IC_FALLINGCLR);
 726        __raw_writel(0xffffffff, base + IC_RISINGCLR);
 727        __raw_writel(0x00000000, base + IC_TESTBIT);
 728        wmb();
 729}
 730
 731static unsigned long alchemy_gpic_pmdata[ALCHEMY_GPIC_INT_NUM + 6];
 732
 733static inline void alchemy_ic_suspend_one(void __iomem *base, unsigned long *d)
 734{
 735        d[0] = __raw_readl(base + IC_CFG0RD);
 736        d[1] = __raw_readl(base + IC_CFG1RD);
 737        d[2] = __raw_readl(base + IC_CFG2RD);
 738        d[3] = __raw_readl(base + IC_SRCRD);
 739        d[4] = __raw_readl(base + IC_ASSIGNRD);
 740        d[5] = __raw_readl(base + IC_WAKERD);
 741        d[6] = __raw_readl(base + IC_MASKRD);
 742        ic_init(base);          /* shut it up too while at it */
 743}
 744
 745static inline void alchemy_ic_resume_one(void __iomem *base, unsigned long *d)
 746{
 747        ic_init(base);
 748
 749        __raw_writel(d[0], base + IC_CFG0SET);
 750        __raw_writel(d[1], base + IC_CFG1SET);
 751        __raw_writel(d[2], base + IC_CFG2SET);
 752        __raw_writel(d[3], base + IC_SRCSET);
 753        __raw_writel(d[4], base + IC_ASSIGNSET);
 754        __raw_writel(d[5], base + IC_WAKESET);
 755        wmb();
 756
 757        __raw_writel(d[6], base + IC_MASKSET);
 758        wmb();
 759}
 760
 761static int alchemy_ic_suspend(void)
 762{
 763        alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR),
 764                               alchemy_gpic_pmdata);
 765        alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR),
 766                               &alchemy_gpic_pmdata[7]);
 767        return 0;
 768}
 769
 770static void alchemy_ic_resume(void)
 771{
 772        alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR),
 773                              &alchemy_gpic_pmdata[7]);
 774        alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR),
 775                              alchemy_gpic_pmdata);
 776}
 777
 778static int alchemy_gpic_suspend(void)
 779{
 780        void __iomem *base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR);
 781        int i;
 782
 783        /* save 4 interrupt mask status registers */
 784        alchemy_gpic_pmdata[0] = __raw_readl(base + AU1300_GPIC_IEN + 0x0);
 785        alchemy_gpic_pmdata[1] = __raw_readl(base + AU1300_GPIC_IEN + 0x4);
 786        alchemy_gpic_pmdata[2] = __raw_readl(base + AU1300_GPIC_IEN + 0x8);
 787        alchemy_gpic_pmdata[3] = __raw_readl(base + AU1300_GPIC_IEN + 0xc);
 788
 789        /* save misc register(s) */
 790        alchemy_gpic_pmdata[4] = __raw_readl(base + AU1300_GPIC_DMASEL);
 791
 792        /* molto silenzioso */
 793        __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x0);
 794        __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x4);
 795        __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x8);
 796        __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0xc);
 797        wmb();
 798
 799        /* save pin/int-type configuration */
 800        base += AU1300_GPIC_PINCFG;
 801        for (i = 0; i < ALCHEMY_GPIC_INT_NUM; i++)
 802                alchemy_gpic_pmdata[i + 5] = __raw_readl(base + (i << 2));
 803
 804        wmb();
 805
 806        return 0;
 807}
 808
 809static void alchemy_gpic_resume(void)
 810{
 811        void __iomem *base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR);
 812        int i;
 813
 814        /* disable all first */
 815        __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x0);
 816        __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x4);
 817        __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x8);
 818        __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0xc);
 819        wmb();
 820
 821        /* restore pin/int-type configurations */
 822        base += AU1300_GPIC_PINCFG;
 823        for (i = 0; i < ALCHEMY_GPIC_INT_NUM; i++)
 824                __raw_writel(alchemy_gpic_pmdata[i + 5], base + (i << 2));
 825        wmb();
 826
 827        /* restore misc register(s) */
 828        base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR);
 829        __raw_writel(alchemy_gpic_pmdata[4], base + AU1300_GPIC_DMASEL);
 830        wmb();
 831
 832        /* finally restore masks */
 833        __raw_writel(alchemy_gpic_pmdata[0], base + AU1300_GPIC_IEN + 0x0);
 834        __raw_writel(alchemy_gpic_pmdata[1], base + AU1300_GPIC_IEN + 0x4);
 835        __raw_writel(alchemy_gpic_pmdata[2], base + AU1300_GPIC_IEN + 0x8);
 836        __raw_writel(alchemy_gpic_pmdata[3], base + AU1300_GPIC_IEN + 0xc);
 837        wmb();
 838}
 839
 840static struct syscore_ops alchemy_ic_pmops = {
 841        .suspend        = alchemy_ic_suspend,
 842        .resume         = alchemy_ic_resume,
 843};
 844
 845static struct syscore_ops alchemy_gpic_pmops = {
 846        .suspend        = alchemy_gpic_suspend,
 847        .resume         = alchemy_gpic_resume,
 848};
 849
 850/******************************************************************************/
 851
 852/* create chained handlers for the 4 IC requests to the MIPS IRQ ctrl */
 853#define DISP(name, base, addr)                                                \
 854static void au1000_##name##_dispatch(struct irq_desc *d)                      \
 855{                                                                             \
 856        unsigned long r = __raw_readl((void __iomem *)KSEG1ADDR(addr));       \
 857        if (likely(r))                                                        \
 858                generic_handle_irq(base + __ffs(r));                          \
 859        else                                                                  \
 860                spurious_interrupt();                                         \
 861}
 862
 863DISP(ic0r0, AU1000_INTC0_INT_BASE, AU1000_IC0_PHYS_ADDR + IC_REQ0INT)
 864DISP(ic0r1, AU1000_INTC0_INT_BASE, AU1000_IC0_PHYS_ADDR + IC_REQ1INT)
 865DISP(ic1r0, AU1000_INTC1_INT_BASE, AU1000_IC1_PHYS_ADDR + IC_REQ0INT)
 866DISP(ic1r1, AU1000_INTC1_INT_BASE, AU1000_IC1_PHYS_ADDR + IC_REQ1INT)
 867
 868static void alchemy_gpic_dispatch(struct irq_desc *d)
 869{
 870        int i = __raw_readl(AU1300_GPIC_ADDR + AU1300_GPIC_PRIENC);
 871        generic_handle_irq(ALCHEMY_GPIC_INT_BASE + i);
 872}
 873
 874/******************************************************************************/
 875
 876static void __init au1000_init_irq(struct alchemy_irqmap *map)
 877{
 878        unsigned int bit, irq_nr;
 879        void __iomem *base;
 880
 881        ic_init((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR));
 882        ic_init((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR));
 883        register_syscore_ops(&alchemy_ic_pmops);
 884        mips_cpu_irq_init();
 885
 886        /* register all 64 possible IC0+IC1 irq sources as type "none".
 887         * Use set_irq_type() to set edge/level behaviour at runtime.
 888         */
 889        for (irq_nr = AU1000_INTC0_INT_BASE;
 890             (irq_nr < AU1000_INTC0_INT_BASE + 32); irq_nr++)
 891                au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE);
 892
 893        for (irq_nr = AU1000_INTC1_INT_BASE;
 894             (irq_nr < AU1000_INTC1_INT_BASE + 32); irq_nr++)
 895                au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE);
 896
 897        /*
 898         * Initialize IC0, which is fixed per processor.
 899         */
 900        while (map->irq != -1) {
 901                irq_nr = map->irq;
 902
 903                if (irq_nr >= AU1000_INTC1_INT_BASE) {
 904                        bit = irq_nr - AU1000_INTC1_INT_BASE;
 905                        base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
 906                } else {
 907                        bit = irq_nr - AU1000_INTC0_INT_BASE;
 908                        base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
 909                }
 910                if (map->prio == 0)
 911                        __raw_writel(1 << bit, base + IC_ASSIGNSET);
 912
 913                au1x_ic_settype(irq_get_irq_data(irq_nr), map->type);
 914                ++map;
 915        }
 916
 917        irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 2, au1000_ic0r0_dispatch);
 918        irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 3, au1000_ic0r1_dispatch);
 919        irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 4, au1000_ic1r0_dispatch);
 920        irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 5, au1000_ic1r1_dispatch);
 921}
 922
 923static void __init alchemy_gpic_init_irq(const struct alchemy_irqmap *dints)
 924{
 925        int i;
 926        void __iomem *bank_base;
 927
 928        register_syscore_ops(&alchemy_gpic_pmops);
 929        mips_cpu_irq_init();
 930
 931        /* disable & ack all possible interrupt sources */
 932        for (i = 0; i < 4; i++) {
 933                bank_base = AU1300_GPIC_ADDR + (i * 4);
 934                __raw_writel(~0UL, bank_base + AU1300_GPIC_IDIS);
 935                wmb();
 936                __raw_writel(~0UL, bank_base + AU1300_GPIC_IPEND);
 937                wmb();
 938        }
 939
 940        /* register an irq_chip for them, with 2nd highest priority */
 941        for (i = ALCHEMY_GPIC_INT_BASE; i <= ALCHEMY_GPIC_INT_LAST; i++) {
 942                au1300_set_irq_priority(i, 1);
 943                au1300_gpic_settype(irq_get_irq_data(i), IRQ_TYPE_NONE);
 944        }
 945
 946        /* setup known on-chip sources */
 947        while ((i = dints->irq) != -1) {
 948                au1300_gpic_settype(irq_get_irq_data(i), dints->type);
 949                au1300_set_irq_priority(i, dints->prio);
 950
 951                if (dints->internal)
 952                        au1300_pinfunc_to_dev(i - ALCHEMY_GPIC_INT_BASE);
 953
 954                dints++;
 955        }
 956
 957        irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 2, alchemy_gpic_dispatch);
 958        irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 3, alchemy_gpic_dispatch);
 959        irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 4, alchemy_gpic_dispatch);
 960        irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 5, alchemy_gpic_dispatch);
 961}
 962
 963/******************************************************************************/
 964
 965void __init arch_init_irq(void)
 966{
 967        switch (alchemy_get_cputype()) {
 968        case ALCHEMY_CPU_AU1000:
 969                au1000_init_irq(au1000_irqmap);
 970                break;
 971        case ALCHEMY_CPU_AU1500:
 972                au1000_init_irq(au1500_irqmap);
 973                break;
 974        case ALCHEMY_CPU_AU1100:
 975                au1000_init_irq(au1100_irqmap);
 976                break;
 977        case ALCHEMY_CPU_AU1550:
 978                au1000_init_irq(au1550_irqmap);
 979                break;
 980        case ALCHEMY_CPU_AU1200:
 981                au1000_init_irq(au1200_irqmap);
 982                break;
 983        case ALCHEMY_CPU_AU1300:
 984                alchemy_gpic_init_irq(au1300_irqmap);
 985                break;
 986        default:
 987                pr_err("unknown Alchemy IRQ core\n");
 988                break;
 989        }
 990}
 991
 992asmlinkage void plat_irq_dispatch(void)
 993{
 994        unsigned long r = (read_c0_status() & read_c0_cause()) >> 8;
 995        do_IRQ(MIPS_CPU_IRQ_BASE + __ffs(r & 0xff));
 996}
 997