linux/arch/x86/kernel/mpparse.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0
   2/*
   3 *      Intel Multiprocessor Specification 1.1 and 1.4
   4 *      compliant MP-table parsing routines.
   5 *
   6 *      (c) 1995 Alan Cox, Building #3 <alan@lxorguk.ukuu.org.uk>
   7 *      (c) 1998, 1999, 2000, 2009 Ingo Molnar <mingo@redhat.com>
   8 *      (c) 2008 Alexey Starikovskiy <astarikovskiy@suse.de>
   9 */
  10
  11#include <linux/mm.h>
  12#include <linux/init.h>
  13#include <linux/delay.h>
  14#include <linux/memblock.h>
  15#include <linux/kernel_stat.h>
  16#include <linux/mc146818rtc.h>
  17#include <linux/bitops.h>
  18#include <linux/acpi.h>
  19#include <linux/smp.h>
  20#include <linux/pci.h>
  21
  22#include <asm/irqdomain.h>
  23#include <asm/mtrr.h>
  24#include <asm/mpspec.h>
  25#include <asm/pgalloc.h>
  26#include <asm/io_apic.h>
  27#include <asm/proto.h>
  28#include <asm/bios_ebda.h>
  29#include <asm/e820/api.h>
  30#include <asm/setup.h>
  31#include <asm/smp.h>
  32
  33#include <asm/apic.h>
  34/*
  35 * Checksum an MP configuration block.
  36 */
  37
  38static int __init mpf_checksum(unsigned char *mp, int len)
  39{
  40        int sum = 0;
  41
  42        while (len--)
  43                sum += *mp++;
  44
  45        return sum & 0xFF;
  46}
  47
  48int __init default_mpc_apic_id(struct mpc_cpu *m)
  49{
  50        return m->apicid;
  51}
  52
  53static void __init MP_processor_info(struct mpc_cpu *m)
  54{
  55        int apicid;
  56        char *bootup_cpu = "";
  57
  58        if (!(m->cpuflag & CPU_ENABLED)) {
  59                disabled_cpus++;
  60                return;
  61        }
  62
  63        apicid = x86_init.mpparse.mpc_apic_id(m);
  64
  65        if (m->cpuflag & CPU_BOOTPROCESSOR) {
  66                bootup_cpu = " (Bootup-CPU)";
  67                boot_cpu_physical_apicid = m->apicid;
  68        }
  69
  70        pr_info("Processor #%d%s\n", m->apicid, bootup_cpu);
  71        generic_processor_info(apicid, m->apicver);
  72}
  73
  74#ifdef CONFIG_X86_IO_APIC
  75void __init default_mpc_oem_bus_info(struct mpc_bus *m, char *str)
  76{
  77        memcpy(str, m->bustype, 6);
  78        str[6] = 0;
  79        apic_printk(APIC_VERBOSE, "Bus #%d is %s\n", m->busid, str);
  80}
  81
  82static void __init MP_bus_info(struct mpc_bus *m)
  83{
  84        char str[7];
  85
  86        x86_init.mpparse.mpc_oem_bus_info(m, str);
  87
  88#if MAX_MP_BUSSES < 256
  89        if (m->busid >= MAX_MP_BUSSES) {
  90                pr_warn("MP table busid value (%d) for bustype %s is too large, max. supported is %d\n",
  91                        m->busid, str, MAX_MP_BUSSES - 1);
  92                return;
  93        }
  94#endif
  95
  96        set_bit(m->busid, mp_bus_not_pci);
  97        if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA) - 1) == 0) {
  98#ifdef CONFIG_EISA
  99                mp_bus_id_to_type[m->busid] = MP_BUS_ISA;
 100#endif
 101        } else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI) - 1) == 0) {
 102                if (x86_init.mpparse.mpc_oem_pci_bus)
 103                        x86_init.mpparse.mpc_oem_pci_bus(m);
 104
 105                clear_bit(m->busid, mp_bus_not_pci);
 106#ifdef CONFIG_EISA
 107                mp_bus_id_to_type[m->busid] = MP_BUS_PCI;
 108        } else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA) - 1) == 0) {
 109                mp_bus_id_to_type[m->busid] = MP_BUS_EISA;
 110#endif
 111        } else
 112                pr_warn("Unknown bustype %s - ignoring\n", str);
 113}
 114
 115static void __init MP_ioapic_info(struct mpc_ioapic *m)
 116{
 117        struct ioapic_domain_cfg cfg = {
 118                .type = IOAPIC_DOMAIN_LEGACY,
 119                .ops = &mp_ioapic_irqdomain_ops,
 120        };
 121
 122        if (m->flags & MPC_APIC_USABLE)
 123                mp_register_ioapic(m->apicid, m->apicaddr, gsi_top, &cfg);
 124}
 125
 126static void __init print_mp_irq_info(struct mpc_intsrc *mp_irq)
 127{
 128        apic_printk(APIC_VERBOSE,
 129                "Int: type %d, pol %d, trig %d, bus %02x, IRQ %02x, APIC ID %x, APIC INT %02x\n",
 130                mp_irq->irqtype, mp_irq->irqflag & 3,
 131                (mp_irq->irqflag >> 2) & 3, mp_irq->srcbus,
 132                mp_irq->srcbusirq, mp_irq->dstapic, mp_irq->dstirq);
 133}
 134
 135#else /* CONFIG_X86_IO_APIC */
 136static inline void __init MP_bus_info(struct mpc_bus *m) {}
 137static inline void __init MP_ioapic_info(struct mpc_ioapic *m) {}
 138#endif /* CONFIG_X86_IO_APIC */
 139
 140static void __init MP_lintsrc_info(struct mpc_lintsrc *m)
 141{
 142        apic_printk(APIC_VERBOSE,
 143                "Lint: type %d, pol %d, trig %d, bus %02x, IRQ %02x, APIC ID %x, APIC LINT %02x\n",
 144                m->irqtype, m->irqflag & 3, (m->irqflag >> 2) & 3, m->srcbusid,
 145                m->srcbusirq, m->destapic, m->destapiclint);
 146}
 147
 148/*
 149 * Read/parse the MPC
 150 */
 151static int __init smp_check_mpc(struct mpc_table *mpc, char *oem, char *str)
 152{
 153
 154        if (memcmp(mpc->signature, MPC_SIGNATURE, 4)) {
 155                pr_err("MPTABLE: bad signature [%c%c%c%c]!\n",
 156                       mpc->signature[0], mpc->signature[1],
 157                       mpc->signature[2], mpc->signature[3]);
 158                return 0;
 159        }
 160        if (mpf_checksum((unsigned char *)mpc, mpc->length)) {
 161                pr_err("MPTABLE: checksum error!\n");
 162                return 0;
 163        }
 164        if (mpc->spec != 0x01 && mpc->spec != 0x04) {
 165                pr_err("MPTABLE: bad table version (%d)!!\n", mpc->spec);
 166                return 0;
 167        }
 168        if (!mpc->lapic) {
 169                pr_err("MPTABLE: null local APIC address!\n");
 170                return 0;
 171        }
 172        memcpy(oem, mpc->oem, 8);
 173        oem[8] = 0;
 174        pr_info("MPTABLE: OEM ID: %s\n", oem);
 175
 176        memcpy(str, mpc->productid, 12);
 177        str[12] = 0;
 178
 179        pr_info("MPTABLE: Product ID: %s\n", str);
 180
 181        pr_info("MPTABLE: APIC at: 0x%X\n", mpc->lapic);
 182
 183        return 1;
 184}
 185
 186static void skip_entry(unsigned char **ptr, int *count, int size)
 187{
 188        *ptr += size;
 189        *count += size;
 190}
 191
 192static void __init smp_dump_mptable(struct mpc_table *mpc, unsigned char *mpt)
 193{
 194        pr_err("Your mptable is wrong, contact your HW vendor!\n");
 195        pr_cont("type %x\n", *mpt);
 196        print_hex_dump(KERN_ERR, "  ", DUMP_PREFIX_ADDRESS, 16,
 197                        1, mpc, mpc->length, 1);
 198}
 199
 200void __init default_smp_read_mpc_oem(struct mpc_table *mpc) { }
 201
 202static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early)
 203{
 204        char str[16];
 205        char oem[10];
 206
 207        int count = sizeof(*mpc);
 208        unsigned char *mpt = ((unsigned char *)mpc) + count;
 209
 210        if (!smp_check_mpc(mpc, oem, str))
 211                return 0;
 212
 213        /* Initialize the lapic mapping */
 214        if (!acpi_lapic)
 215                register_lapic_address(mpc->lapic);
 216
 217        if (early)
 218                return 1;
 219
 220        if (mpc->oemptr)
 221                x86_init.mpparse.smp_read_mpc_oem(mpc);
 222
 223        /*
 224         *      Now process the configuration blocks.
 225         */
 226        x86_init.mpparse.mpc_record(0);
 227
 228        while (count < mpc->length) {
 229                switch (*mpt) {
 230                case MP_PROCESSOR:
 231                        /* ACPI may have already provided this data */
 232                        if (!acpi_lapic)
 233                                MP_processor_info((struct mpc_cpu *)mpt);
 234                        skip_entry(&mpt, &count, sizeof(struct mpc_cpu));
 235                        break;
 236                case MP_BUS:
 237                        MP_bus_info((struct mpc_bus *)mpt);
 238                        skip_entry(&mpt, &count, sizeof(struct mpc_bus));
 239                        break;
 240                case MP_IOAPIC:
 241                        MP_ioapic_info((struct mpc_ioapic *)mpt);
 242                        skip_entry(&mpt, &count, sizeof(struct mpc_ioapic));
 243                        break;
 244                case MP_INTSRC:
 245                        mp_save_irq((struct mpc_intsrc *)mpt);
 246                        skip_entry(&mpt, &count, sizeof(struct mpc_intsrc));
 247                        break;
 248                case MP_LINTSRC:
 249                        MP_lintsrc_info((struct mpc_lintsrc *)mpt);
 250                        skip_entry(&mpt, &count, sizeof(struct mpc_lintsrc));
 251                        break;
 252                default:
 253                        /* wrong mptable */
 254                        smp_dump_mptable(mpc, mpt);
 255                        count = mpc->length;
 256                        break;
 257                }
 258                x86_init.mpparse.mpc_record(1);
 259        }
 260
 261        if (!num_processors)
 262                pr_err("MPTABLE: no processors registered!\n");
 263        return num_processors;
 264}
 265
 266#ifdef CONFIG_X86_IO_APIC
 267
 268static int __init ELCR_trigger(unsigned int irq)
 269{
 270        unsigned int port;
 271
 272        port = 0x4d0 + (irq >> 3);
 273        return (inb(port) >> (irq & 7)) & 1;
 274}
 275
 276static void __init construct_default_ioirq_mptable(int mpc_default_type)
 277{
 278        struct mpc_intsrc intsrc;
 279        int i;
 280        int ELCR_fallback = 0;
 281
 282        intsrc.type = MP_INTSRC;
 283        intsrc.irqflag = MP_IRQTRIG_DEFAULT | MP_IRQPOL_DEFAULT;
 284        intsrc.srcbus = 0;
 285        intsrc.dstapic = mpc_ioapic_id(0);
 286
 287        intsrc.irqtype = mp_INT;
 288
 289        /*
 290         *  If true, we have an ISA/PCI system with no IRQ entries
 291         *  in the MP table. To prevent the PCI interrupts from being set up
 292         *  incorrectly, we try to use the ELCR. The sanity check to see if
 293         *  there is good ELCR data is very simple - IRQ0, 1, 2 and 13 can
 294         *  never be level sensitive, so we simply see if the ELCR agrees.
 295         *  If it does, we assume it's valid.
 296         */
 297        if (mpc_default_type == 5) {
 298                pr_info("ISA/PCI bus type with no IRQ information... falling back to ELCR\n");
 299
 300                if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) ||
 301                    ELCR_trigger(13))
 302                        pr_err("ELCR contains invalid data... not using ELCR\n");
 303                else {
 304                        pr_info("Using ELCR to identify PCI interrupts\n");
 305                        ELCR_fallback = 1;
 306                }
 307        }
 308
 309        for (i = 0; i < 16; i++) {
 310                switch (mpc_default_type) {
 311                case 2:
 312                        if (i == 0 || i == 13)
 313                                continue;       /* IRQ0 & IRQ13 not connected */
 314                        /* fall through */
 315                default:
 316                        if (i == 2)
 317                                continue;       /* IRQ2 is never connected */
 318                }
 319
 320                if (ELCR_fallback) {
 321                        /*
 322                         *  If the ELCR indicates a level-sensitive interrupt, we
 323                         *  copy that information over to the MP table in the
 324                         *  irqflag field (level sensitive, active high polarity).
 325                         */
 326                        if (ELCR_trigger(i)) {
 327                                intsrc.irqflag = MP_IRQTRIG_LEVEL |
 328                                                 MP_IRQPOL_ACTIVE_HIGH;
 329                        } else {
 330                                intsrc.irqflag = MP_IRQTRIG_DEFAULT |
 331                                                 MP_IRQPOL_DEFAULT;
 332                        }
 333                }
 334
 335                intsrc.srcbusirq = i;
 336                intsrc.dstirq = i ? i : 2;      /* IRQ0 to INTIN2 */
 337                mp_save_irq(&intsrc);
 338        }
 339
 340        intsrc.irqtype = mp_ExtINT;
 341        intsrc.srcbusirq = 0;
 342        intsrc.dstirq = 0;      /* 8259A to INTIN0 */
 343        mp_save_irq(&intsrc);
 344}
 345
 346
 347static void __init construct_ioapic_table(int mpc_default_type)
 348{
 349        struct mpc_ioapic ioapic;
 350        struct mpc_bus bus;
 351
 352        bus.type = MP_BUS;
 353        bus.busid = 0;
 354        switch (mpc_default_type) {
 355        default:
 356                pr_err("???\nUnknown standard configuration %d\n",
 357                       mpc_default_type);
 358                /* fall through */
 359        case 1:
 360        case 5:
 361                memcpy(bus.bustype, "ISA   ", 6);
 362                break;
 363        case 2:
 364        case 6:
 365        case 3:
 366                memcpy(bus.bustype, "EISA  ", 6);
 367                break;
 368        }
 369        MP_bus_info(&bus);
 370        if (mpc_default_type > 4) {
 371                bus.busid = 1;
 372                memcpy(bus.bustype, "PCI   ", 6);
 373                MP_bus_info(&bus);
 374        }
 375
 376        ioapic.type     = MP_IOAPIC;
 377        ioapic.apicid   = 2;
 378        ioapic.apicver  = mpc_default_type > 4 ? 0x10 : 0x01;
 379        ioapic.flags    = MPC_APIC_USABLE;
 380        ioapic.apicaddr = IO_APIC_DEFAULT_PHYS_BASE;
 381        MP_ioapic_info(&ioapic);
 382
 383        /*
 384         * We set up most of the low 16 IO-APIC pins according to MPS rules.
 385         */
 386        construct_default_ioirq_mptable(mpc_default_type);
 387}
 388#else
 389static inline void __init construct_ioapic_table(int mpc_default_type) { }
 390#endif
 391
 392static inline void __init construct_default_ISA_mptable(int mpc_default_type)
 393{
 394        struct mpc_cpu processor;
 395        struct mpc_lintsrc lintsrc;
 396        int linttypes[2] = { mp_ExtINT, mp_NMI };
 397        int i;
 398
 399        /*
 400         * local APIC has default address
 401         */
 402        mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
 403
 404        /*
 405         * 2 CPUs, numbered 0 & 1.
 406         */
 407        processor.type = MP_PROCESSOR;
 408        /* Either an integrated APIC or a discrete 82489DX. */
 409        processor.apicver = mpc_default_type > 4 ? 0x10 : 0x01;
 410        processor.cpuflag = CPU_ENABLED;
 411        processor.cpufeature = (boot_cpu_data.x86 << 8) |
 412            (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_stepping;
 413        processor.featureflag = boot_cpu_data.x86_capability[CPUID_1_EDX];
 414        processor.reserved[0] = 0;
 415        processor.reserved[1] = 0;
 416        for (i = 0; i < 2; i++) {
 417                processor.apicid = i;
 418                MP_processor_info(&processor);
 419        }
 420
 421        construct_ioapic_table(mpc_default_type);
 422
 423        lintsrc.type = MP_LINTSRC;
 424        lintsrc.irqflag = MP_IRQTRIG_DEFAULT | MP_IRQPOL_DEFAULT;
 425        lintsrc.srcbusid = 0;
 426        lintsrc.srcbusirq = 0;
 427        lintsrc.destapic = MP_APIC_ALL;
 428        for (i = 0; i < 2; i++) {
 429                lintsrc.irqtype = linttypes[i];
 430                lintsrc.destapiclint = i;
 431                MP_lintsrc_info(&lintsrc);
 432        }
 433}
 434
 435static unsigned long mpf_base;
 436static bool mpf_found;
 437
 438static unsigned long __init get_mpc_size(unsigned long physptr)
 439{
 440        struct mpc_table *mpc;
 441        unsigned long size;
 442
 443        mpc = early_memremap(physptr, PAGE_SIZE);
 444        size = mpc->length;
 445        early_memunmap(mpc, PAGE_SIZE);
 446        apic_printk(APIC_VERBOSE, "  mpc: %lx-%lx\n", physptr, physptr + size);
 447
 448        return size;
 449}
 450
 451static int __init check_physptr(struct mpf_intel *mpf, unsigned int early)
 452{
 453        struct mpc_table *mpc;
 454        unsigned long size;
 455
 456        size = get_mpc_size(mpf->physptr);
 457        mpc = early_memremap(mpf->physptr, size);
 458
 459        /*
 460         * Read the physical hardware table.  Anything here will
 461         * override the defaults.
 462         */
 463        if (!smp_read_mpc(mpc, early)) {
 464#ifdef CONFIG_X86_LOCAL_APIC
 465                smp_found_config = 0;
 466#endif
 467                pr_err("BIOS bug, MP table errors detected!...\n");
 468                pr_cont("... disabling SMP support. (tell your hw vendor)\n");
 469                early_memunmap(mpc, size);
 470                return -1;
 471        }
 472        early_memunmap(mpc, size);
 473
 474        if (early)
 475                return -1;
 476
 477#ifdef CONFIG_X86_IO_APIC
 478        /*
 479         * If there are no explicit MP IRQ entries, then we are
 480         * broken.  We set up most of the low 16 IO-APIC pins to
 481         * ISA defaults and hope it will work.
 482         */
 483        if (!mp_irq_entries) {
 484                struct mpc_bus bus;
 485
 486                pr_err("BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)\n");
 487
 488                bus.type = MP_BUS;
 489                bus.busid = 0;
 490                memcpy(bus.bustype, "ISA   ", 6);
 491                MP_bus_info(&bus);
 492
 493                construct_default_ioirq_mptable(0);
 494        }
 495#endif
 496
 497        return 0;
 498}
 499
 500/*
 501 * Scan the memory blocks for an SMP configuration block.
 502 */
 503void __init default_get_smp_config(unsigned int early)
 504{
 505        struct mpf_intel *mpf;
 506
 507        if (!smp_found_config)
 508                return;
 509
 510        if (!mpf_found)
 511                return;
 512
 513        if (acpi_lapic && early)
 514                return;
 515
 516        /*
 517         * MPS doesn't support hyperthreading, aka only have
 518         * thread 0 apic id in MPS table
 519         */
 520        if (acpi_lapic && acpi_ioapic)
 521                return;
 522
 523        mpf = early_memremap(mpf_base, sizeof(*mpf));
 524        if (!mpf) {
 525                pr_err("MPTABLE: error mapping MP table\n");
 526                return;
 527        }
 528
 529        pr_info("Intel MultiProcessor Specification v1.%d\n",
 530                mpf->specification);
 531#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32)
 532        if (mpf->feature2 & (1 << 7)) {
 533                pr_info("    IMCR and PIC compatibility mode.\n");
 534                pic_mode = 1;
 535        } else {
 536                pr_info("    Virtual Wire compatibility mode.\n");
 537                pic_mode = 0;
 538        }
 539#endif
 540        /*
 541         * Now see if we need to read further.
 542         */
 543        if (mpf->feature1) {
 544                if (early) {
 545                        /*
 546                         * local APIC has default address
 547                         */
 548                        mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
 549                        goto out;
 550                }
 551
 552                pr_info("Default MP configuration #%d\n", mpf->feature1);
 553                construct_default_ISA_mptable(mpf->feature1);
 554
 555        } else if (mpf->physptr) {
 556                if (check_physptr(mpf, early))
 557                        goto out;
 558        } else
 559                BUG();
 560
 561        if (!early)
 562                pr_info("Processors: %d\n", num_processors);
 563        /*
 564         * Only use the first configuration found.
 565         */
 566out:
 567        early_memunmap(mpf, sizeof(*mpf));
 568}
 569
 570static void __init smp_reserve_memory(struct mpf_intel *mpf)
 571{
 572        memblock_reserve(mpf->physptr, get_mpc_size(mpf->physptr));
 573}
 574
 575static int __init smp_scan_config(unsigned long base, unsigned long length)
 576{
 577        unsigned int *bp;
 578        struct mpf_intel *mpf;
 579        int ret = 0;
 580
 581        apic_printk(APIC_VERBOSE, "Scan for SMP in [mem %#010lx-%#010lx]\n",
 582                    base, base + length - 1);
 583        BUILD_BUG_ON(sizeof(*mpf) != 16);
 584
 585        while (length > 0) {
 586                bp = early_memremap(base, length);
 587                mpf = (struct mpf_intel *)bp;
 588                if ((*bp == SMP_MAGIC_IDENT) &&
 589                    (mpf->length == 1) &&
 590                    !mpf_checksum((unsigned char *)bp, 16) &&
 591                    ((mpf->specification == 1)
 592                     || (mpf->specification == 4))) {
 593#ifdef CONFIG_X86_LOCAL_APIC
 594                        smp_found_config = 1;
 595#endif
 596                        mpf_base = base;
 597                        mpf_found = true;
 598
 599                        pr_info("found SMP MP-table at [mem %#010lx-%#010lx]\n",
 600                                base, base + sizeof(*mpf) - 1);
 601
 602                        memblock_reserve(base, sizeof(*mpf));
 603                        if (mpf->physptr)
 604                                smp_reserve_memory(mpf);
 605
 606                        ret = 1;
 607                }
 608                early_memunmap(bp, length);
 609
 610                if (ret)
 611                        break;
 612
 613                base += 16;
 614                length -= 16;
 615        }
 616        return ret;
 617}
 618
 619void __init default_find_smp_config(void)
 620{
 621        unsigned int address;
 622
 623        /*
 624         * FIXME: Linux assumes you have 640K of base ram..
 625         * this continues the error...
 626         *
 627         * 1) Scan the bottom 1K for a signature
 628         * 2) Scan the top 1K of base RAM
 629         * 3) Scan the 64K of bios
 630         */
 631        if (smp_scan_config(0x0, 0x400) ||
 632            smp_scan_config(639 * 0x400, 0x400) ||
 633            smp_scan_config(0xF0000, 0x10000))
 634                return;
 635        /*
 636         * If it is an SMP machine we should know now, unless the
 637         * configuration is in an EISA bus machine with an
 638         * extended bios data area.
 639         *
 640         * there is a real-mode segmented pointer pointing to the
 641         * 4K EBDA area at 0x40E, calculate and scan it here.
 642         *
 643         * NOTE! There are Linux loaders that will corrupt the EBDA
 644         * area, and as such this kind of SMP config may be less
 645         * trustworthy, simply because the SMP table may have been
 646         * stomped on during early boot. These loaders are buggy and
 647         * should be fixed.
 648         *
 649         * MP1.4 SPEC states to only scan first 1K of 4K EBDA.
 650         */
 651
 652        address = get_bios_ebda();
 653        if (address)
 654                smp_scan_config(address, 0x400);
 655}
 656
 657#ifdef CONFIG_X86_IO_APIC
 658static u8 __initdata irq_used[MAX_IRQ_SOURCES];
 659
 660static int  __init get_MP_intsrc_index(struct mpc_intsrc *m)
 661{
 662        int i;
 663
 664        if (m->irqtype != mp_INT)
 665                return 0;
 666
 667        if (m->irqflag != (MP_IRQTRIG_LEVEL | MP_IRQPOL_ACTIVE_LOW))
 668                return 0;
 669
 670        /* not legacy */
 671
 672        for (i = 0; i < mp_irq_entries; i++) {
 673                if (mp_irqs[i].irqtype != mp_INT)
 674                        continue;
 675
 676                if (mp_irqs[i].irqflag != (MP_IRQTRIG_LEVEL |
 677                                           MP_IRQPOL_ACTIVE_LOW))
 678                        continue;
 679
 680                if (mp_irqs[i].srcbus != m->srcbus)
 681                        continue;
 682                if (mp_irqs[i].srcbusirq != m->srcbusirq)
 683                        continue;
 684                if (irq_used[i]) {
 685                        /* already claimed */
 686                        return -2;
 687                }
 688                irq_used[i] = 1;
 689                return i;
 690        }
 691
 692        /* not found */
 693        return -1;
 694}
 695
 696#define SPARE_SLOT_NUM 20
 697
 698static struct mpc_intsrc __initdata *m_spare[SPARE_SLOT_NUM];
 699
 700static void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare)
 701{
 702        int i;
 703
 704        apic_printk(APIC_VERBOSE, "OLD ");
 705        print_mp_irq_info(m);
 706
 707        i = get_MP_intsrc_index(m);
 708        if (i > 0) {
 709                memcpy(m, &mp_irqs[i], sizeof(*m));
 710                apic_printk(APIC_VERBOSE, "NEW ");
 711                print_mp_irq_info(&mp_irqs[i]);
 712                return;
 713        }
 714        if (!i) {
 715                /* legacy, do nothing */
 716                return;
 717        }
 718        if (*nr_m_spare < SPARE_SLOT_NUM) {
 719                /*
 720                 * not found (-1), or duplicated (-2) are invalid entries,
 721                 * we need to use the slot later
 722                 */
 723                m_spare[*nr_m_spare] = m;
 724                *nr_m_spare += 1;
 725        }
 726}
 727
 728static int __init
 729check_slot(unsigned long mpc_new_phys, unsigned long mpc_new_length, int count)
 730{
 731        if (!mpc_new_phys || count <= mpc_new_length) {
 732                WARN(1, "update_mptable: No spare slots (length: %x)\n", count);
 733                return -1;
 734        }
 735
 736        return 0;
 737}
 738#else /* CONFIG_X86_IO_APIC */
 739static
 740inline void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare) {}
 741#endif /* CONFIG_X86_IO_APIC */
 742
 743static int  __init replace_intsrc_all(struct mpc_table *mpc,
 744                                        unsigned long mpc_new_phys,
 745                                        unsigned long mpc_new_length)
 746{
 747#ifdef CONFIG_X86_IO_APIC
 748        int i;
 749#endif
 750        int count = sizeof(*mpc);
 751        int nr_m_spare = 0;
 752        unsigned char *mpt = ((unsigned char *)mpc) + count;
 753
 754        pr_info("mpc_length %x\n", mpc->length);
 755        while (count < mpc->length) {
 756                switch (*mpt) {
 757                case MP_PROCESSOR:
 758                        skip_entry(&mpt, &count, sizeof(struct mpc_cpu));
 759                        break;
 760                case MP_BUS:
 761                        skip_entry(&mpt, &count, sizeof(struct mpc_bus));
 762                        break;
 763                case MP_IOAPIC:
 764                        skip_entry(&mpt, &count, sizeof(struct mpc_ioapic));
 765                        break;
 766                case MP_INTSRC:
 767                        check_irq_src((struct mpc_intsrc *)mpt, &nr_m_spare);
 768                        skip_entry(&mpt, &count, sizeof(struct mpc_intsrc));
 769                        break;
 770                case MP_LINTSRC:
 771                        skip_entry(&mpt, &count, sizeof(struct mpc_lintsrc));
 772                        break;
 773                default:
 774                        /* wrong mptable */
 775                        smp_dump_mptable(mpc, mpt);
 776                        goto out;
 777                }
 778        }
 779
 780#ifdef CONFIG_X86_IO_APIC
 781        for (i = 0; i < mp_irq_entries; i++) {
 782                if (irq_used[i])
 783                        continue;
 784
 785                if (mp_irqs[i].irqtype != mp_INT)
 786                        continue;
 787
 788                if (mp_irqs[i].irqflag != (MP_IRQTRIG_LEVEL |
 789                                           MP_IRQPOL_ACTIVE_LOW))
 790                        continue;
 791
 792                if (nr_m_spare > 0) {
 793                        apic_printk(APIC_VERBOSE, "*NEW* found\n");
 794                        nr_m_spare--;
 795                        memcpy(m_spare[nr_m_spare], &mp_irqs[i], sizeof(mp_irqs[i]));
 796                        m_spare[nr_m_spare] = NULL;
 797                } else {
 798                        struct mpc_intsrc *m = (struct mpc_intsrc *)mpt;
 799                        count += sizeof(struct mpc_intsrc);
 800                        if (check_slot(mpc_new_phys, mpc_new_length, count) < 0)
 801                                goto out;
 802                        memcpy(m, &mp_irqs[i], sizeof(*m));
 803                        mpc->length = count;
 804                        mpt += sizeof(struct mpc_intsrc);
 805                }
 806                print_mp_irq_info(&mp_irqs[i]);
 807        }
 808#endif
 809out:
 810        /* update checksum */
 811        mpc->checksum = 0;
 812        mpc->checksum -= mpf_checksum((unsigned char *)mpc, mpc->length);
 813
 814        return 0;
 815}
 816
 817int enable_update_mptable;
 818
 819static int __init update_mptable_setup(char *str)
 820{
 821        enable_update_mptable = 1;
 822#ifdef CONFIG_PCI
 823        pci_routeirq = 1;
 824#endif
 825        return 0;
 826}
 827early_param("update_mptable", update_mptable_setup);
 828
 829static unsigned long __initdata mpc_new_phys;
 830static unsigned long mpc_new_length __initdata = 4096;
 831
 832/* alloc_mptable or alloc_mptable=4k */
 833static int __initdata alloc_mptable;
 834static int __init parse_alloc_mptable_opt(char *p)
 835{
 836        enable_update_mptable = 1;
 837#ifdef CONFIG_PCI
 838        pci_routeirq = 1;
 839#endif
 840        alloc_mptable = 1;
 841        if (!p)
 842                return 0;
 843        mpc_new_length = memparse(p, &p);
 844        return 0;
 845}
 846early_param("alloc_mptable", parse_alloc_mptable_opt);
 847
 848void __init e820__memblock_alloc_reserved_mpc_new(void)
 849{
 850        if (enable_update_mptable && alloc_mptable)
 851                mpc_new_phys = e820__memblock_alloc_reserved(mpc_new_length, 4);
 852}
 853
 854static int __init update_mp_table(void)
 855{
 856        char str[16];
 857        char oem[10];
 858        struct mpf_intel *mpf;
 859        struct mpc_table *mpc, *mpc_new;
 860        unsigned long size;
 861
 862        if (!enable_update_mptable)
 863                return 0;
 864
 865        if (!mpf_found)
 866                return 0;
 867
 868        mpf = early_memremap(mpf_base, sizeof(*mpf));
 869        if (!mpf) {
 870                pr_err("MPTABLE: mpf early_memremap() failed\n");
 871                return 0;
 872        }
 873
 874        /*
 875         * Now see if we need to go further.
 876         */
 877        if (mpf->feature1)
 878                goto do_unmap_mpf;
 879
 880        if (!mpf->physptr)
 881                goto do_unmap_mpf;
 882
 883        size = get_mpc_size(mpf->physptr);
 884        mpc = early_memremap(mpf->physptr, size);
 885        if (!mpc) {
 886                pr_err("MPTABLE: mpc early_memremap() failed\n");
 887                goto do_unmap_mpf;
 888        }
 889
 890        if (!smp_check_mpc(mpc, oem, str))
 891                goto do_unmap_mpc;
 892
 893        pr_info("mpf: %llx\n", (u64)mpf_base);
 894        pr_info("physptr: %x\n", mpf->physptr);
 895
 896        if (mpc_new_phys && mpc->length > mpc_new_length) {
 897                mpc_new_phys = 0;
 898                pr_info("mpc_new_length is %ld, please use alloc_mptable=8k\n",
 899                        mpc_new_length);
 900        }
 901
 902        if (!mpc_new_phys) {
 903                unsigned char old, new;
 904                /* check if we can change the position */
 905                mpc->checksum = 0;
 906                old = mpf_checksum((unsigned char *)mpc, mpc->length);
 907                mpc->checksum = 0xff;
 908                new = mpf_checksum((unsigned char *)mpc, mpc->length);
 909                if (old == new) {
 910                        pr_info("mpc is readonly, please try alloc_mptable instead\n");
 911                        goto do_unmap_mpc;
 912                }
 913                pr_info("use in-position replacing\n");
 914        } else {
 915                mpc_new = early_memremap(mpc_new_phys, mpc_new_length);
 916                if (!mpc_new) {
 917                        pr_err("MPTABLE: new mpc early_memremap() failed\n");
 918                        goto do_unmap_mpc;
 919                }
 920                mpf->physptr = mpc_new_phys;
 921                memcpy(mpc_new, mpc, mpc->length);
 922                early_memunmap(mpc, size);
 923                mpc = mpc_new;
 924                size = mpc_new_length;
 925                /* check if we can modify that */
 926                if (mpc_new_phys - mpf->physptr) {
 927                        struct mpf_intel *mpf_new;
 928                        /* steal 16 bytes from [0, 1k) */
 929                        mpf_new = early_memremap(0x400 - 16, sizeof(*mpf_new));
 930                        if (!mpf_new) {
 931                                pr_err("MPTABLE: new mpf early_memremap() failed\n");
 932                                goto do_unmap_mpc;
 933                        }
 934                        pr_info("mpf new: %x\n", 0x400 - 16);
 935                        memcpy(mpf_new, mpf, 16);
 936                        early_memunmap(mpf, sizeof(*mpf));
 937                        mpf = mpf_new;
 938                        mpf->physptr = mpc_new_phys;
 939                }
 940                mpf->checksum = 0;
 941                mpf->checksum -= mpf_checksum((unsigned char *)mpf, 16);
 942                pr_info("physptr new: %x\n", mpf->physptr);
 943        }
 944
 945        /*
 946         * only replace the one with mp_INT and
 947         *       MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
 948         * already in mp_irqs , stored by ... and mp_config_acpi_gsi,
 949         * may need pci=routeirq for all coverage
 950         */
 951        replace_intsrc_all(mpc, mpc_new_phys, mpc_new_length);
 952
 953do_unmap_mpc:
 954        early_memunmap(mpc, size);
 955
 956do_unmap_mpf:
 957        early_memunmap(mpf, sizeof(*mpf));
 958
 959        return 0;
 960}
 961
 962late_initcall(update_mp_table);
 963