linux/drivers/char/applicom.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-only
   2/* Derived from Applicom driver ac.c for SCO Unix                            */
   3/* Ported by David Woodhouse, Axiom (Cambridge) Ltd.                         */
   4/* dwmw2@infradead.org 30/8/98                                               */
   5/* $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $                          */
   6/* This module is for Linux 2.1 and 2.2 series kernels.                      */
   7/*****************************************************************************/
   8/* J PAGET 18/02/94 passage V2.4.2 ioctl avec code 2 reset to les interrupt  */
   9/* ceci pour reseter correctement apres une sortie sauvage                   */
  10/* J PAGET 02/05/94 passage V2.4.3 dans le traitement de d'interruption,     */
  11/* LoopCount n'etait pas initialise a 0.                                     */
  12/* F LAFORSE 04/07/95 version V2.6.0 lecture bidon apres acces a une carte   */
  13/*           pour liberer le bus                                             */
  14/* J.PAGET 19/11/95 version V2.6.1 Nombre, addresse,irq n'est plus configure */
  15/* et passe en argument a acinit, mais est scrute sur le bus pour s'adapter  */
  16/* au nombre de cartes presentes sur le bus. IOCL code 6 affichait V2.4.3    */
  17/* F.LAFORSE 28/11/95 creation de fichiers acXX.o avec les differentes       */
  18/* addresses de base des cartes, IOCTL 6 plus complet                         */
  19/* J.PAGET le 19/08/96 copie de la version V2.6 en V2.8.0 sans modification  */
  20/* de code autre que le texte V2.6.1 en V2.8.0                               */
  21/*****************************************************************************/
  22
  23
  24#include <linux/kernel.h>
  25#include <linux/module.h>
  26#include <linux/interrupt.h>
  27#include <linux/sched/signal.h>
  28#include <linux/slab.h>
  29#include <linux/errno.h>
  30#include <linux/mutex.h>
  31#include <linux/miscdevice.h>
  32#include <linux/pci.h>
  33#include <linux/wait.h>
  34#include <linux/init.h>
  35#include <linux/fs.h>
  36#include <linux/nospec.h>
  37
  38#include <asm/io.h>
  39#include <linux/uaccess.h>
  40
  41#include "applicom.h"
  42
  43
  44/* NOTE: We use for loops with {write,read}b() instead of 
  45   memcpy_{from,to}io throughout this driver. This is because
  46   the board doesn't correctly handle word accesses - only
  47   bytes. 
  48*/
  49
  50
  51#undef DEBUG
  52
  53#define MAX_BOARD 8             /* maximum of pc board possible */
  54#define MAX_ISA_BOARD 4
  55#define LEN_RAM_IO 0x800
  56#define AC_MINOR 157
  57
  58#ifndef PCI_VENDOR_ID_APPLICOM
  59#define PCI_VENDOR_ID_APPLICOM                0x1389
  60#define PCI_DEVICE_ID_APPLICOM_PCIGENERIC     0x0001
  61#define PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN 0x0002
  62#define PCI_DEVICE_ID_APPLICOM_PCI2000PFB     0x0003
  63#endif
  64
  65static DEFINE_MUTEX(ac_mutex);
  66static char *applicom_pci_devnames[] = {
  67        "PCI board",
  68        "PCI2000IBS / PCI2000CAN",
  69        "PCI2000PFB"
  70};
  71
  72static const struct pci_device_id applicom_pci_tbl[] = {
  73        { PCI_VDEVICE(APPLICOM, PCI_DEVICE_ID_APPLICOM_PCIGENERIC) },
  74        { PCI_VDEVICE(APPLICOM, PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN) },
  75        { PCI_VDEVICE(APPLICOM, PCI_DEVICE_ID_APPLICOM_PCI2000PFB) },
  76        { 0 }
  77};
  78MODULE_DEVICE_TABLE(pci, applicom_pci_tbl);
  79
  80MODULE_AUTHOR("David Woodhouse & Applicom International");
  81MODULE_DESCRIPTION("Driver for Applicom Profibus card");
  82MODULE_LICENSE("GPL");
  83MODULE_ALIAS_MISCDEV(AC_MINOR);
  84
  85MODULE_SUPPORTED_DEVICE("ac");
  86
  87
  88static struct applicom_board {
  89        unsigned long PhysIO;
  90        void __iomem *RamIO;
  91        wait_queue_head_t FlagSleepSend;
  92        long irq;
  93        spinlock_t mutex;
  94} apbs[MAX_BOARD];
  95
  96static unsigned int irq = 0;    /* interrupt number IRQ       */
  97static unsigned long mem = 0;   /* physical segment of board  */
  98
  99module_param_hw(irq, uint, irq, 0);
 100MODULE_PARM_DESC(irq, "IRQ of the Applicom board");
 101module_param_hw(mem, ulong, iomem, 0);
 102MODULE_PARM_DESC(mem, "Shared Memory Address of Applicom board");
 103
 104static unsigned int numboards;  /* number of installed boards */
 105static volatile unsigned char Dummy;
 106static DECLARE_WAIT_QUEUE_HEAD(FlagSleepRec);
 107static unsigned int WriteErrorCount;    /* number of write error      */
 108static unsigned int ReadErrorCount;     /* number of read error       */
 109static unsigned int DeviceErrorCount;   /* number of device error     */
 110
 111static ssize_t ac_read (struct file *, char __user *, size_t, loff_t *);
 112static ssize_t ac_write (struct file *, const char __user *, size_t, loff_t *);
 113static long ac_ioctl(struct file *, unsigned int, unsigned long);
 114static irqreturn_t ac_interrupt(int, void *);
 115
 116static const struct file_operations ac_fops = {
 117        .owner = THIS_MODULE,
 118        .llseek = no_llseek,
 119        .read = ac_read,
 120        .write = ac_write,
 121        .unlocked_ioctl = ac_ioctl,
 122};
 123
 124static struct miscdevice ac_miscdev = {
 125        AC_MINOR,
 126        "ac",
 127        &ac_fops
 128};
 129
 130static int dummy;       /* dev_id for request_irq() */
 131
 132static int ac_register_board(unsigned long physloc, void __iomem *loc, 
 133                      unsigned char boardno)
 134{
 135        volatile unsigned char byte_reset_it;
 136
 137        if((readb(loc + CONF_END_TEST)     != 0x00) ||
 138           (readb(loc + CONF_END_TEST + 1) != 0x55) ||
 139           (readb(loc + CONF_END_TEST + 2) != 0xAA) ||
 140           (readb(loc + CONF_END_TEST + 3) != 0xFF))
 141                return 0;
 142
 143        if (!boardno)
 144                boardno = readb(loc + NUMCARD_OWNER_TO_PC);
 145
 146        if (!boardno || boardno > MAX_BOARD) {
 147                printk(KERN_WARNING "Board #%d (at 0x%lx) is out of range (1 <= x <= %d).\n",
 148                       boardno, physloc, MAX_BOARD);
 149                return 0;
 150        }
 151
 152        if (apbs[boardno - 1].RamIO) {
 153                printk(KERN_WARNING "Board #%d (at 0x%lx) conflicts with previous board #%d (at 0x%lx)\n", 
 154                       boardno, physloc, boardno, apbs[boardno-1].PhysIO);
 155                return 0;
 156        }
 157
 158        boardno--;
 159
 160        apbs[boardno].PhysIO = physloc;
 161        apbs[boardno].RamIO = loc;
 162        init_waitqueue_head(&apbs[boardno].FlagSleepSend);
 163        spin_lock_init(&apbs[boardno].mutex);
 164        byte_reset_it = readb(loc + RAM_IT_TO_PC);
 165
 166        numboards++;
 167        return boardno + 1;
 168}
 169
 170static void __exit applicom_exit(void)
 171{
 172        unsigned int i;
 173
 174        misc_deregister(&ac_miscdev);
 175
 176        for (i = 0; i < MAX_BOARD; i++) {
 177
 178                if (!apbs[i].RamIO)
 179                        continue;
 180
 181                if (apbs[i].irq)
 182                        free_irq(apbs[i].irq, &dummy);
 183
 184                iounmap(apbs[i].RamIO);
 185        }
 186}
 187
 188static int __init applicom_init(void)
 189{
 190        int i, numisa = 0;
 191        struct pci_dev *dev = NULL;
 192        void __iomem *RamIO;
 193        int boardno, ret;
 194
 195        printk(KERN_INFO "Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $\n");
 196
 197        /* No mem and irq given - check for a PCI card */
 198
 199        while ( (dev = pci_get_class(PCI_CLASS_OTHERS << 16, dev))) {
 200
 201                if (!pci_match_id(applicom_pci_tbl, dev))
 202                        continue;
 203                
 204                if (pci_enable_device(dev))
 205                        return -EIO;
 206
 207                RamIO = ioremap_nocache(pci_resource_start(dev, 0), LEN_RAM_IO);
 208
 209                if (!RamIO) {
 210                        printk(KERN_INFO "ac.o: Failed to ioremap PCI memory "
 211                                "space at 0x%llx\n",
 212                                (unsigned long long)pci_resource_start(dev, 0));
 213                        pci_disable_device(dev);
 214                        return -EIO;
 215                }
 216
 217                printk(KERN_INFO "Applicom %s found at mem 0x%llx, irq %d\n",
 218                       applicom_pci_devnames[dev->device-1],
 219                           (unsigned long long)pci_resource_start(dev, 0),
 220                       dev->irq);
 221
 222                boardno = ac_register_board(pci_resource_start(dev, 0),
 223                                RamIO, 0);
 224                if (!boardno) {
 225                        printk(KERN_INFO "ac.o: PCI Applicom device doesn't have correct signature.\n");
 226                        iounmap(RamIO);
 227                        pci_disable_device(dev);
 228                        continue;
 229                }
 230
 231                if (request_irq(dev->irq, &ac_interrupt, IRQF_SHARED, "Applicom PCI", &dummy)) {
 232                        printk(KERN_INFO "Could not allocate IRQ %d for PCI Applicom device.\n", dev->irq);
 233                        iounmap(RamIO);
 234                        pci_disable_device(dev);
 235                        apbs[boardno - 1].RamIO = NULL;
 236                        continue;
 237                }
 238
 239                /* Enable interrupts. */
 240
 241                writeb(0x40, apbs[boardno - 1].RamIO + RAM_IT_FROM_PC);
 242
 243                apbs[boardno - 1].irq = dev->irq;
 244        }
 245
 246        /* Finished with PCI cards. If none registered, 
 247         * and there was no mem/irq specified, exit */
 248
 249        if (!mem || !irq) {
 250                if (numboards)
 251                        goto fin;
 252                else {
 253                        printk(KERN_INFO "ac.o: No PCI boards found.\n");
 254                        printk(KERN_INFO "ac.o: For an ISA board you must supply memory and irq parameters.\n");
 255                        return -ENXIO;
 256                }
 257        }
 258
 259        /* Now try the specified ISA cards */
 260
 261        for (i = 0; i < MAX_ISA_BOARD; i++) {
 262                RamIO = ioremap_nocache(mem + (LEN_RAM_IO * i), LEN_RAM_IO);
 263
 264                if (!RamIO) {
 265                        printk(KERN_INFO "ac.o: Failed to ioremap the ISA card's memory space (slot #%d)\n", i + 1);
 266                        continue;
 267                }
 268
 269                if (!(boardno = ac_register_board((unsigned long)mem+ (LEN_RAM_IO*i),
 270                                                  RamIO,i+1))) {
 271                        iounmap(RamIO);
 272                        continue;
 273                }
 274
 275                printk(KERN_NOTICE "Applicom ISA card found at mem 0x%lx, irq %d\n", mem + (LEN_RAM_IO*i), irq);
 276
 277                if (!numisa) {
 278                        if (request_irq(irq, &ac_interrupt, IRQF_SHARED, "Applicom ISA", &dummy)) {
 279                                printk(KERN_WARNING "Could not allocate IRQ %d for ISA Applicom device.\n", irq);
 280                                iounmap(RamIO);
 281                                apbs[boardno - 1].RamIO = NULL;
 282                        }
 283                        else
 284                                apbs[boardno - 1].irq = irq;
 285                }
 286                else
 287                        apbs[boardno - 1].irq = 0;
 288
 289                numisa++;
 290        }
 291
 292        if (!numisa)
 293                printk(KERN_WARNING "ac.o: No valid ISA Applicom boards found "
 294                                "at mem 0x%lx\n", mem);
 295
 296 fin:
 297        init_waitqueue_head(&FlagSleepRec);
 298
 299        WriteErrorCount = 0;
 300        ReadErrorCount = 0;
 301        DeviceErrorCount = 0;
 302
 303        if (numboards) {
 304                ret = misc_register(&ac_miscdev);
 305                if (ret) {
 306                        printk(KERN_WARNING "ac.o: Unable to register misc device\n");
 307                        goto out;
 308                }
 309                for (i = 0; i < MAX_BOARD; i++) {
 310                        int serial;
 311                        char boardname[(SERIAL_NUMBER - TYPE_CARD) + 1];
 312
 313                        if (!apbs[i].RamIO)
 314                                continue;
 315
 316                        for (serial = 0; serial < SERIAL_NUMBER - TYPE_CARD; serial++)
 317                                boardname[serial] = readb(apbs[i].RamIO + TYPE_CARD + serial);
 318
 319                        boardname[serial] = 0;
 320
 321
 322                        printk(KERN_INFO "Applicom board %d: %s, PROM V%d.%d",
 323                               i+1, boardname,
 324                               (int)(readb(apbs[i].RamIO + VERS) >> 4),
 325                               (int)(readb(apbs[i].RamIO + VERS) & 0xF));
 326                        
 327                        serial = (readb(apbs[i].RamIO + SERIAL_NUMBER) << 16) + 
 328                                (readb(apbs[i].RamIO + SERIAL_NUMBER + 1) << 8) + 
 329                                (readb(apbs[i].RamIO + SERIAL_NUMBER + 2) );
 330
 331                        if (serial != 0)
 332                                printk(" S/N %d\n", serial);
 333                        else
 334                                printk("\n");
 335                }
 336                return 0;
 337        }
 338
 339        else
 340                return -ENXIO;
 341
 342out:
 343        for (i = 0; i < MAX_BOARD; i++) {
 344                if (!apbs[i].RamIO)
 345                        continue;
 346                if (apbs[i].irq)
 347                        free_irq(apbs[i].irq, &dummy);
 348                iounmap(apbs[i].RamIO);
 349        }
 350        return ret;
 351}
 352
 353module_init(applicom_init);
 354module_exit(applicom_exit);
 355
 356
 357static ssize_t ac_write(struct file *file, const char __user *buf, size_t count, loff_t * ppos)
 358{
 359        unsigned int NumCard;   /* Board number 1 -> 8           */
 360        unsigned int IndexCard; /* Index board number 0 -> 7     */
 361        unsigned char TicCard;  /* Board TIC to send             */
 362        unsigned long flags;    /* Current priority              */
 363        struct st_ram_io st_loc;
 364        struct mailbox tmpmailbox;
 365#ifdef DEBUG
 366        int c;
 367#endif
 368        DECLARE_WAITQUEUE(wait, current);
 369
 370        if (count != sizeof(struct st_ram_io) + sizeof(struct mailbox)) {
 371                static int warncount = 5;
 372                if (warncount) {
 373                        printk(KERN_INFO "Hmmm. write() of Applicom card, length %zd != expected %zd\n",
 374                               count, sizeof(struct st_ram_io) + sizeof(struct mailbox));
 375                        warncount--;
 376                }
 377                return -EINVAL;
 378        }
 379
 380        if(copy_from_user(&st_loc, buf, sizeof(struct st_ram_io))) 
 381                return -EFAULT;
 382        
 383        if(copy_from_user(&tmpmailbox, &buf[sizeof(struct st_ram_io)],
 384                          sizeof(struct mailbox))) 
 385                return -EFAULT;
 386
 387        NumCard = st_loc.num_card;      /* board number to send          */
 388        TicCard = st_loc.tic_des_from_pc;       /* tic number to send            */
 389        IndexCard = NumCard - 1;
 390
 391        if (IndexCard >= MAX_BOARD)
 392                return -EINVAL;
 393        IndexCard = array_index_nospec(IndexCard, MAX_BOARD);
 394
 395        if (!apbs[IndexCard].RamIO)
 396                return -EINVAL;
 397
 398#ifdef DEBUG
 399        printk("Write to applicom card #%d. struct st_ram_io follows:",
 400               IndexCard+1);
 401
 402                for (c = 0; c < sizeof(struct st_ram_io);) {
 403                
 404                        printk("\n%5.5X: %2.2X", c, ((unsigned char *) &st_loc)[c]);
 405
 406                        for (c++; c % 8 && c < sizeof(struct st_ram_io); c++) {
 407                                printk(" %2.2X", ((unsigned char *) &st_loc)[c]);
 408                        }
 409                }
 410
 411                printk("\nstruct mailbox follows:");
 412
 413                for (c = 0; c < sizeof(struct mailbox);) {
 414                        printk("\n%5.5X: %2.2X", c, ((unsigned char *) &tmpmailbox)[c]);
 415
 416                        for (c++; c % 8 && c < sizeof(struct mailbox); c++) {
 417                                printk(" %2.2X", ((unsigned char *) &tmpmailbox)[c]);
 418                        }
 419                }
 420
 421                printk("\n");
 422#endif
 423
 424        spin_lock_irqsave(&apbs[IndexCard].mutex, flags);
 425
 426        /* Test octet ready correct */
 427        if(readb(apbs[IndexCard].RamIO + DATA_FROM_PC_READY) > 2) { 
 428                Dummy = readb(apbs[IndexCard].RamIO + VERS);
 429                spin_unlock_irqrestore(&apbs[IndexCard].mutex, flags);
 430                printk(KERN_WARNING "APPLICOM driver write error board %d, DataFromPcReady = %d\n",
 431                       IndexCard,(int)readb(apbs[IndexCard].RamIO + DATA_FROM_PC_READY));
 432                DeviceErrorCount++;
 433                return -EIO;
 434        }
 435        
 436        /* Place ourselves on the wait queue */
 437        set_current_state(TASK_INTERRUPTIBLE);
 438        add_wait_queue(&apbs[IndexCard].FlagSleepSend, &wait);
 439
 440        /* Check whether the card is ready for us */
 441        while (readb(apbs[IndexCard].RamIO + DATA_FROM_PC_READY) != 0) {
 442                Dummy = readb(apbs[IndexCard].RamIO + VERS);
 443                /* It's busy. Sleep. */
 444
 445                spin_unlock_irqrestore(&apbs[IndexCard].mutex, flags);
 446                schedule();
 447                if (signal_pending(current)) {
 448                        remove_wait_queue(&apbs[IndexCard].FlagSleepSend,
 449                                          &wait);
 450                        return -EINTR;
 451                }
 452                spin_lock_irqsave(&apbs[IndexCard].mutex, flags);
 453                set_current_state(TASK_INTERRUPTIBLE);
 454        }
 455
 456        /* We may not have actually slept */
 457        set_current_state(TASK_RUNNING);
 458        remove_wait_queue(&apbs[IndexCard].FlagSleepSend, &wait);
 459
 460        writeb(1, apbs[IndexCard].RamIO + DATA_FROM_PC_READY);
 461
 462        /* Which is best - lock down the pages with rawio and then
 463           copy directly, or use bounce buffers? For now we do the latter 
 464           because it works with 2.2 still */
 465        {
 466                unsigned char *from = (unsigned char *) &tmpmailbox;
 467                void __iomem *to = apbs[IndexCard].RamIO + RAM_FROM_PC;
 468                int c;
 469
 470                for (c = 0; c < sizeof(struct mailbox); c++)
 471                        writeb(*(from++), to++);
 472        }
 473
 474        writeb(0x20, apbs[IndexCard].RamIO + TIC_OWNER_FROM_PC);
 475        writeb(0xff, apbs[IndexCard].RamIO + NUMCARD_OWNER_FROM_PC);
 476        writeb(TicCard, apbs[IndexCard].RamIO + TIC_DES_FROM_PC);
 477        writeb(NumCard, apbs[IndexCard].RamIO + NUMCARD_DES_FROM_PC);
 478        writeb(2, apbs[IndexCard].RamIO + DATA_FROM_PC_READY);
 479        writeb(1, apbs[IndexCard].RamIO + RAM_IT_FROM_PC);
 480        Dummy = readb(apbs[IndexCard].RamIO + VERS);
 481        spin_unlock_irqrestore(&apbs[IndexCard].mutex, flags);
 482        return 0;
 483}
 484
 485static int do_ac_read(int IndexCard, char __user *buf,
 486                struct st_ram_io *st_loc, struct mailbox *mailbox)
 487{
 488        void __iomem *from = apbs[IndexCard].RamIO + RAM_TO_PC;
 489        unsigned char *to = (unsigned char *)mailbox;
 490#ifdef DEBUG
 491        int c;
 492#endif
 493
 494        st_loc->tic_owner_to_pc = readb(apbs[IndexCard].RamIO + TIC_OWNER_TO_PC);
 495        st_loc->numcard_owner_to_pc = readb(apbs[IndexCard].RamIO + NUMCARD_OWNER_TO_PC);
 496
 497
 498        {
 499                int c;
 500
 501                for (c = 0; c < sizeof(struct mailbox); c++)
 502                        *(to++) = readb(from++);
 503        }
 504        writeb(1, apbs[IndexCard].RamIO + ACK_FROM_PC_READY);
 505        writeb(1, apbs[IndexCard].RamIO + TYP_ACK_FROM_PC);
 506        writeb(IndexCard+1, apbs[IndexCard].RamIO + NUMCARD_ACK_FROM_PC);
 507        writeb(readb(apbs[IndexCard].RamIO + TIC_OWNER_TO_PC), 
 508               apbs[IndexCard].RamIO + TIC_ACK_FROM_PC);
 509        writeb(2, apbs[IndexCard].RamIO + ACK_FROM_PC_READY);
 510        writeb(0, apbs[IndexCard].RamIO + DATA_TO_PC_READY);
 511        writeb(2, apbs[IndexCard].RamIO + RAM_IT_FROM_PC);
 512        Dummy = readb(apbs[IndexCard].RamIO + VERS);
 513
 514#ifdef DEBUG
 515                printk("Read from applicom card #%d. struct st_ram_io follows:", NumCard);
 516
 517                for (c = 0; c < sizeof(struct st_ram_io);) {
 518                        printk("\n%5.5X: %2.2X", c, ((unsigned char *)st_loc)[c]);
 519
 520                        for (c++; c % 8 && c < sizeof(struct st_ram_io); c++) {
 521                                printk(" %2.2X", ((unsigned char *)st_loc)[c]);
 522                        }
 523                }
 524
 525                printk("\nstruct mailbox follows:");
 526
 527                for (c = 0; c < sizeof(struct mailbox);) {
 528                        printk("\n%5.5X: %2.2X", c, ((unsigned char *)mailbox)[c]);
 529
 530                        for (c++; c % 8 && c < sizeof(struct mailbox); c++) {
 531                                printk(" %2.2X", ((unsigned char *)mailbox)[c]);
 532                        }
 533                }
 534                printk("\n");
 535#endif
 536        return (sizeof(struct st_ram_io) + sizeof(struct mailbox));
 537}
 538
 539static ssize_t ac_read (struct file *filp, char __user *buf, size_t count, loff_t *ptr)
 540{
 541        unsigned long flags;
 542        unsigned int i;
 543        unsigned char tmp;
 544        int ret = 0;
 545        DECLARE_WAITQUEUE(wait, current);
 546#ifdef DEBUG
 547        int loopcount=0;
 548#endif
 549        /* No need to ratelimit this. Only root can trigger it anyway */
 550        if (count != sizeof(struct st_ram_io) + sizeof(struct mailbox)) {
 551                printk( KERN_WARNING "Hmmm. read() of Applicom card, length %zd != expected %zd\n",
 552                        count,sizeof(struct st_ram_io) + sizeof(struct mailbox));
 553                return -EINVAL;
 554        }
 555        
 556        while(1) {
 557                /* Stick ourself on the wait queue */
 558                set_current_state(TASK_INTERRUPTIBLE);
 559                add_wait_queue(&FlagSleepRec, &wait);
 560                
 561                /* Scan each board, looking for one which has a packet for us */
 562                for (i=0; i < MAX_BOARD; i++) {
 563                        if (!apbs[i].RamIO)
 564                                continue;
 565                        spin_lock_irqsave(&apbs[i].mutex, flags);
 566                        
 567                        tmp = readb(apbs[i].RamIO + DATA_TO_PC_READY);
 568                        
 569                        if (tmp == 2) {
 570                                struct st_ram_io st_loc;
 571                                struct mailbox mailbox;
 572
 573                                /* Got a packet for us */
 574                                memset(&st_loc, 0, sizeof(st_loc));
 575                                ret = do_ac_read(i, buf, &st_loc, &mailbox);
 576                                spin_unlock_irqrestore(&apbs[i].mutex, flags);
 577                                set_current_state(TASK_RUNNING);
 578                                remove_wait_queue(&FlagSleepRec, &wait);
 579
 580                                if (copy_to_user(buf, &st_loc, sizeof(st_loc)))
 581                                        return -EFAULT;
 582                                if (copy_to_user(buf + sizeof(st_loc), &mailbox, sizeof(mailbox)))
 583                                        return -EFAULT;
 584                                return tmp;
 585                        }
 586                        
 587                        if (tmp > 2) {
 588                                /* Got an error */
 589                                Dummy = readb(apbs[i].RamIO + VERS);
 590                                
 591                                spin_unlock_irqrestore(&apbs[i].mutex, flags);
 592                                set_current_state(TASK_RUNNING);
 593                                remove_wait_queue(&FlagSleepRec, &wait);
 594                                
 595                                printk(KERN_WARNING "APPLICOM driver read error board %d, DataToPcReady = %d\n",
 596                                       i,(int)readb(apbs[i].RamIO + DATA_TO_PC_READY));
 597                                DeviceErrorCount++;
 598                                return -EIO;
 599                        }
 600                        
 601                        /* Nothing for us. Try the next board */
 602                        Dummy = readb(apbs[i].RamIO + VERS);
 603                        spin_unlock_irqrestore(&apbs[i].mutex, flags);
 604                        
 605                } /* per board */
 606
 607                /* OK - No boards had data for us. Sleep now */
 608
 609                schedule();
 610                remove_wait_queue(&FlagSleepRec, &wait);
 611
 612                if (signal_pending(current))
 613                        return -EINTR;
 614
 615#ifdef DEBUG
 616                if (loopcount++ > 2) {
 617                        printk(KERN_DEBUG "Looping in ac_read. loopcount %d\n", loopcount);
 618                }
 619#endif
 620        } 
 621}
 622
 623static irqreturn_t ac_interrupt(int vec, void *dev_instance)
 624{
 625        unsigned int i;
 626        unsigned int FlagInt;
 627        unsigned int LoopCount;
 628        int handled = 0;
 629
 630        //    printk("Applicom interrupt on IRQ %d occurred\n", vec);
 631
 632        LoopCount = 0;
 633
 634        do {
 635                FlagInt = 0;
 636                for (i = 0; i < MAX_BOARD; i++) {
 637                        
 638                        /* Skip if this board doesn't exist */
 639                        if (!apbs[i].RamIO)
 640                                continue;
 641
 642                        spin_lock(&apbs[i].mutex);
 643
 644                        /* Skip if this board doesn't want attention */
 645                        if(readb(apbs[i].RamIO + RAM_IT_TO_PC) == 0) {
 646                                spin_unlock(&apbs[i].mutex);
 647                                continue;
 648                        }
 649
 650                        handled = 1;
 651                        FlagInt = 1;
 652                        writeb(0, apbs[i].RamIO + RAM_IT_TO_PC);
 653
 654                        if (readb(apbs[i].RamIO + DATA_TO_PC_READY) > 2) {
 655                                printk(KERN_WARNING "APPLICOM driver interrupt err board %d, DataToPcReady = %d\n",
 656                                       i+1,(int)readb(apbs[i].RamIO + DATA_TO_PC_READY));
 657                                DeviceErrorCount++;
 658                        }
 659
 660                        if((readb(apbs[i].RamIO + DATA_FROM_PC_READY) > 2) && 
 661                           (readb(apbs[i].RamIO + DATA_FROM_PC_READY) != 6)) {
 662                                
 663                                printk(KERN_WARNING "APPLICOM driver interrupt err board %d, DataFromPcReady = %d\n",
 664                                       i+1,(int)readb(apbs[i].RamIO + DATA_FROM_PC_READY));
 665                                DeviceErrorCount++;
 666                        }
 667
 668                        if (readb(apbs[i].RamIO + DATA_TO_PC_READY) == 2) {     /* mailbox sent by the card ?   */
 669                                if (waitqueue_active(&FlagSleepRec)) {
 670                                wake_up_interruptible(&FlagSleepRec);
 671                        }
 672                        }
 673
 674                        if (readb(apbs[i].RamIO + DATA_FROM_PC_READY) == 0) {   /* ram i/o free for write by pc ? */
 675                                if (waitqueue_active(&apbs[i].FlagSleepSend)) { /* process sleep during read ?    */
 676                                        wake_up_interruptible(&apbs[i].FlagSleepSend);
 677                                }
 678                        }
 679                        Dummy = readb(apbs[i].RamIO + VERS);
 680
 681                        if(readb(apbs[i].RamIO + RAM_IT_TO_PC)) {
 682                                /* There's another int waiting on this card */
 683                                spin_unlock(&apbs[i].mutex);
 684                                i--;
 685                        } else {
 686                                spin_unlock(&apbs[i].mutex);
 687                        }
 688                }
 689                if (FlagInt)
 690                        LoopCount = 0;
 691                else
 692                        LoopCount++;
 693        } while(LoopCount < 2);
 694        return IRQ_RETVAL(handled);
 695}
 696
 697
 698
 699static long ac_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 700     
 701{                               /* @ ADG ou ATO selon le cas */
 702        int i;
 703        unsigned char IndexCard;
 704        void __iomem *pmem;
 705        int ret = 0;
 706        static int warncount = 10;
 707        volatile unsigned char byte_reset_it;
 708        struct st_ram_io *adgl;
 709        void __user *argp = (void __user *)arg;
 710
 711        /* In general, the device is only openable by root anyway, so we're not
 712           particularly concerned that bogus ioctls can flood the console. */
 713
 714        adgl = memdup_user(argp, sizeof(struct st_ram_io));
 715        if (IS_ERR(adgl))
 716                return PTR_ERR(adgl);
 717
 718        mutex_lock(&ac_mutex);  
 719        IndexCard = adgl->num_card-1;
 720         
 721        if (cmd != 6 && IndexCard >= MAX_BOARD)
 722                goto err;
 723        IndexCard = array_index_nospec(IndexCard, MAX_BOARD);
 724
 725        if (cmd != 6 && !apbs[IndexCard].RamIO)
 726                goto err;
 727
 728        switch (cmd) {
 729                
 730        case 0:
 731                pmem = apbs[IndexCard].RamIO;
 732                for (i = 0; i < sizeof(struct st_ram_io); i++)
 733                        ((unsigned char *)adgl)[i]=readb(pmem++);
 734                if (copy_to_user(argp, adgl, sizeof(struct st_ram_io)))
 735                        ret = -EFAULT;
 736                break;
 737        case 1:
 738                pmem = apbs[IndexCard].RamIO + CONF_END_TEST;
 739                for (i = 0; i < 4; i++)
 740                        adgl->conf_end_test[i] = readb(pmem++);
 741                for (i = 0; i < 2; i++)
 742                        adgl->error_code[i] = readb(pmem++);
 743                for (i = 0; i < 4; i++)
 744                        adgl->parameter_error[i] = readb(pmem++);
 745                pmem = apbs[IndexCard].RamIO + VERS;
 746                adgl->vers = readb(pmem);
 747                pmem = apbs[IndexCard].RamIO + TYPE_CARD;
 748                for (i = 0; i < 20; i++)
 749                        adgl->reserv1[i] = readb(pmem++);
 750                *(int *)&adgl->reserv1[20] =  
 751                        (readb(apbs[IndexCard].RamIO + SERIAL_NUMBER) << 16) + 
 752                        (readb(apbs[IndexCard].RamIO + SERIAL_NUMBER + 1) << 8) + 
 753                        (readb(apbs[IndexCard].RamIO + SERIAL_NUMBER + 2) );
 754
 755                if (copy_to_user(argp, adgl, sizeof(struct st_ram_io)))
 756                        ret = -EFAULT;
 757                break;
 758        case 2:
 759                pmem = apbs[IndexCard].RamIO + CONF_END_TEST;
 760                for (i = 0; i < 10; i++)
 761                        writeb(0xff, pmem++);
 762                writeb(adgl->data_from_pc_ready, 
 763                       apbs[IndexCard].RamIO + DATA_FROM_PC_READY);
 764
 765                writeb(1, apbs[IndexCard].RamIO + RAM_IT_FROM_PC);
 766                
 767                for (i = 0; i < MAX_BOARD; i++) {
 768                        if (apbs[i].RamIO) {
 769                                byte_reset_it = readb(apbs[i].RamIO + RAM_IT_TO_PC);
 770                        }
 771                }
 772                break;
 773        case 3:
 774                pmem = apbs[IndexCard].RamIO + TIC_DES_FROM_PC;
 775                writeb(adgl->tic_des_from_pc, pmem);
 776                break;
 777        case 4:
 778                pmem = apbs[IndexCard].RamIO + TIC_OWNER_TO_PC;
 779                adgl->tic_owner_to_pc     = readb(pmem++);
 780                adgl->numcard_owner_to_pc = readb(pmem);
 781                if (copy_to_user(argp, adgl,sizeof(struct st_ram_io)))
 782                        ret = -EFAULT;
 783                break;
 784        case 5:
 785                writeb(adgl->num_card, apbs[IndexCard].RamIO + NUMCARD_OWNER_TO_PC);
 786                writeb(adgl->num_card, apbs[IndexCard].RamIO + NUMCARD_DES_FROM_PC);
 787                writeb(adgl->num_card, apbs[IndexCard].RamIO + NUMCARD_ACK_FROM_PC);
 788                writeb(4, apbs[IndexCard].RamIO + DATA_FROM_PC_READY);
 789                writeb(1, apbs[IndexCard].RamIO + RAM_IT_FROM_PC);
 790                break;
 791        case 6:
 792                printk(KERN_INFO "APPLICOM driver release .... V2.8.0 ($Revision: 1.30 $)\n");
 793                printk(KERN_INFO "Number of installed boards . %d\n", (int) numboards);
 794                printk(KERN_INFO "Segment of board ........... %X\n", (int) mem);
 795                printk(KERN_INFO "Interrupt IRQ number ....... %d\n", (int) irq);
 796                for (i = 0; i < MAX_BOARD; i++) {
 797                        int serial;
 798                        char boardname[(SERIAL_NUMBER - TYPE_CARD) + 1];
 799
 800                        if (!apbs[i].RamIO)
 801                                continue;
 802
 803                        for (serial = 0; serial < SERIAL_NUMBER - TYPE_CARD; serial++)
 804                                boardname[serial] = readb(apbs[i].RamIO + TYPE_CARD + serial);
 805                        boardname[serial] = 0;
 806
 807                        printk(KERN_INFO "Prom version board %d ....... V%d.%d %s",
 808                               i+1,
 809                               (int)(readb(apbs[i].RamIO + VERS) >> 4),
 810                               (int)(readb(apbs[i].RamIO + VERS) & 0xF),
 811                               boardname);
 812
 813
 814                        serial = (readb(apbs[i].RamIO + SERIAL_NUMBER) << 16) + 
 815                                (readb(apbs[i].RamIO + SERIAL_NUMBER + 1) << 8) + 
 816                                (readb(apbs[i].RamIO + SERIAL_NUMBER + 2) );
 817
 818                        if (serial != 0)
 819                                printk(" S/N %d\n", serial);
 820                        else
 821                                printk("\n");
 822                }
 823                if (DeviceErrorCount != 0)
 824                        printk(KERN_INFO "DeviceErrorCount ........... %d\n", DeviceErrorCount);
 825                if (ReadErrorCount != 0)
 826                        printk(KERN_INFO "ReadErrorCount ............. %d\n", ReadErrorCount);
 827                if (WriteErrorCount != 0)
 828                        printk(KERN_INFO "WriteErrorCount ............ %d\n", WriteErrorCount);
 829                if (waitqueue_active(&FlagSleepRec))
 830                        printk(KERN_INFO "Process in read pending\n");
 831                for (i = 0; i < MAX_BOARD; i++) {
 832                        if (apbs[i].RamIO && waitqueue_active(&apbs[i].FlagSleepSend))
 833                                printk(KERN_INFO "Process in write pending board %d\n",i+1);
 834                }
 835                break;
 836        default:
 837                ret = -ENOTTY;
 838                break;
 839        }
 840        Dummy = readb(apbs[IndexCard].RamIO + VERS);
 841        kfree(adgl);
 842        mutex_unlock(&ac_mutex);
 843        return 0;
 844
 845err:
 846        if (warncount) {
 847                pr_warn("APPLICOM driver IOCTL, bad board number %d\n",
 848                        (int)IndexCard + 1);
 849                warncount--;
 850        }
 851        kfree(adgl);
 852        mutex_unlock(&ac_mutex);
 853        return -EINVAL;
 854
 855}
 856
 857