linux/drivers/dma/pl330.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-or-later
   2/*
   3 * Copyright (c) 2012 Samsung Electronics Co., Ltd.
   4 *              http://www.samsung.com
   5 *
   6 * Copyright (C) 2010 Samsung Electronics Co. Ltd.
   7 *      Jaswinder Singh <jassi.brar@samsung.com>
   8 */
   9
  10#include <linux/debugfs.h>
  11#include <linux/kernel.h>
  12#include <linux/io.h>
  13#include <linux/init.h>
  14#include <linux/slab.h>
  15#include <linux/module.h>
  16#include <linux/string.h>
  17#include <linux/delay.h>
  18#include <linux/interrupt.h>
  19#include <linux/dma-mapping.h>
  20#include <linux/dmaengine.h>
  21#include <linux/amba/bus.h>
  22#include <linux/scatterlist.h>
  23#include <linux/of.h>
  24#include <linux/of_dma.h>
  25#include <linux/err.h>
  26#include <linux/pm_runtime.h>
  27#include <linux/bug.h>
  28#include <linux/reset.h>
  29
  30#include "dmaengine.h"
  31#define PL330_MAX_CHAN          8
  32#define PL330_MAX_IRQS          32
  33#define PL330_MAX_PERI          32
  34#define PL330_MAX_BURST         16
  35
  36#define PL330_QUIRK_BROKEN_NO_FLUSHP BIT(0)
  37
  38enum pl330_cachectrl {
  39        CCTRL0,         /* Noncacheable and nonbufferable */
  40        CCTRL1,         /* Bufferable only */
  41        CCTRL2,         /* Cacheable, but do not allocate */
  42        CCTRL3,         /* Cacheable and bufferable, but do not allocate */
  43        INVALID1,       /* AWCACHE = 0x1000 */
  44        INVALID2,
  45        CCTRL6,         /* Cacheable write-through, allocate on writes only */
  46        CCTRL7,         /* Cacheable write-back, allocate on writes only */
  47};
  48
  49enum pl330_byteswap {
  50        SWAP_NO,
  51        SWAP_2,
  52        SWAP_4,
  53        SWAP_8,
  54        SWAP_16,
  55};
  56
  57/* Register and Bit field Definitions */
  58#define DS                      0x0
  59#define DS_ST_STOP              0x0
  60#define DS_ST_EXEC              0x1
  61#define DS_ST_CMISS             0x2
  62#define DS_ST_UPDTPC            0x3
  63#define DS_ST_WFE               0x4
  64#define DS_ST_ATBRR             0x5
  65#define DS_ST_QBUSY             0x6
  66#define DS_ST_WFP               0x7
  67#define DS_ST_KILL              0x8
  68#define DS_ST_CMPLT             0x9
  69#define DS_ST_FLTCMP            0xe
  70#define DS_ST_FAULT             0xf
  71
  72#define DPC                     0x4
  73#define INTEN                   0x20
  74#define ES                      0x24
  75#define INTSTATUS               0x28
  76#define INTCLR                  0x2c
  77#define FSM                     0x30
  78#define FSC                     0x34
  79#define FTM                     0x38
  80
  81#define _FTC                    0x40
  82#define FTC(n)                  (_FTC + (n)*0x4)
  83
  84#define _CS                     0x100
  85#define CS(n)                   (_CS + (n)*0x8)
  86#define CS_CNS                  (1 << 21)
  87
  88#define _CPC                    0x104
  89#define CPC(n)                  (_CPC + (n)*0x8)
  90
  91#define _SA                     0x400
  92#define SA(n)                   (_SA + (n)*0x20)
  93
  94#define _DA                     0x404
  95#define DA(n)                   (_DA + (n)*0x20)
  96
  97#define _CC                     0x408
  98#define CC(n)                   (_CC + (n)*0x20)
  99
 100#define CC_SRCINC               (1 << 0)
 101#define CC_DSTINC               (1 << 14)
 102#define CC_SRCPRI               (1 << 8)
 103#define CC_DSTPRI               (1 << 22)
 104#define CC_SRCNS                (1 << 9)
 105#define CC_DSTNS                (1 << 23)
 106#define CC_SRCIA                (1 << 10)
 107#define CC_DSTIA                (1 << 24)
 108#define CC_SRCBRSTLEN_SHFT      4
 109#define CC_DSTBRSTLEN_SHFT      18
 110#define CC_SRCBRSTSIZE_SHFT     1
 111#define CC_DSTBRSTSIZE_SHFT     15
 112#define CC_SRCCCTRL_SHFT        11
 113#define CC_SRCCCTRL_MASK        0x7
 114#define CC_DSTCCTRL_SHFT        25
 115#define CC_DRCCCTRL_MASK        0x7
 116#define CC_SWAP_SHFT            28
 117
 118#define _LC0                    0x40c
 119#define LC0(n)                  (_LC0 + (n)*0x20)
 120
 121#define _LC1                    0x410
 122#define LC1(n)                  (_LC1 + (n)*0x20)
 123
 124#define DBGSTATUS               0xd00
 125#define DBG_BUSY                (1 << 0)
 126
 127#define DBGCMD                  0xd04
 128#define DBGINST0                0xd08
 129#define DBGINST1                0xd0c
 130
 131#define CR0                     0xe00
 132#define CR1                     0xe04
 133#define CR2                     0xe08
 134#define CR3                     0xe0c
 135#define CR4                     0xe10
 136#define CRD                     0xe14
 137
 138#define PERIPH_ID               0xfe0
 139#define PERIPH_REV_SHIFT        20
 140#define PERIPH_REV_MASK         0xf
 141#define PERIPH_REV_R0P0         0
 142#define PERIPH_REV_R1P0         1
 143#define PERIPH_REV_R1P1         2
 144
 145#define CR0_PERIPH_REQ_SET      (1 << 0)
 146#define CR0_BOOT_EN_SET         (1 << 1)
 147#define CR0_BOOT_MAN_NS         (1 << 2)
 148#define CR0_NUM_CHANS_SHIFT     4
 149#define CR0_NUM_CHANS_MASK      0x7
 150#define CR0_NUM_PERIPH_SHIFT    12
 151#define CR0_NUM_PERIPH_MASK     0x1f
 152#define CR0_NUM_EVENTS_SHIFT    17
 153#define CR0_NUM_EVENTS_MASK     0x1f
 154
 155#define CR1_ICACHE_LEN_SHIFT    0
 156#define CR1_ICACHE_LEN_MASK     0x7
 157#define CR1_NUM_ICACHELINES_SHIFT       4
 158#define CR1_NUM_ICACHELINES_MASK        0xf
 159
 160#define CRD_DATA_WIDTH_SHIFT    0
 161#define CRD_DATA_WIDTH_MASK     0x7
 162#define CRD_WR_CAP_SHIFT        4
 163#define CRD_WR_CAP_MASK         0x7
 164#define CRD_WR_Q_DEP_SHIFT      8
 165#define CRD_WR_Q_DEP_MASK       0xf
 166#define CRD_RD_CAP_SHIFT        12
 167#define CRD_RD_CAP_MASK         0x7
 168#define CRD_RD_Q_DEP_SHIFT      16
 169#define CRD_RD_Q_DEP_MASK       0xf
 170#define CRD_DATA_BUFF_SHIFT     20
 171#define CRD_DATA_BUFF_MASK      0x3ff
 172
 173#define PART                    0x330
 174#define DESIGNER                0x41
 175#define REVISION                0x0
 176#define INTEG_CFG               0x0
 177#define PERIPH_ID_VAL           ((PART << 0) | (DESIGNER << 12))
 178
 179#define PL330_STATE_STOPPED             (1 << 0)
 180#define PL330_STATE_EXECUTING           (1 << 1)
 181#define PL330_STATE_WFE                 (1 << 2)
 182#define PL330_STATE_FAULTING            (1 << 3)
 183#define PL330_STATE_COMPLETING          (1 << 4)
 184#define PL330_STATE_WFP                 (1 << 5)
 185#define PL330_STATE_KILLING             (1 << 6)
 186#define PL330_STATE_FAULT_COMPLETING    (1 << 7)
 187#define PL330_STATE_CACHEMISS           (1 << 8)
 188#define PL330_STATE_UPDTPC              (1 << 9)
 189#define PL330_STATE_ATBARRIER           (1 << 10)
 190#define PL330_STATE_QUEUEBUSY           (1 << 11)
 191#define PL330_STATE_INVALID             (1 << 15)
 192
 193#define PL330_STABLE_STATES (PL330_STATE_STOPPED | PL330_STATE_EXECUTING \
 194                                | PL330_STATE_WFE | PL330_STATE_FAULTING)
 195
 196#define CMD_DMAADDH             0x54
 197#define CMD_DMAEND              0x00
 198#define CMD_DMAFLUSHP           0x35
 199#define CMD_DMAGO               0xa0
 200#define CMD_DMALD               0x04
 201#define CMD_DMALDP              0x25
 202#define CMD_DMALP               0x20
 203#define CMD_DMALPEND            0x28
 204#define CMD_DMAKILL             0x01
 205#define CMD_DMAMOV              0xbc
 206#define CMD_DMANOP              0x18
 207#define CMD_DMARMB              0x12
 208#define CMD_DMASEV              0x34
 209#define CMD_DMAST               0x08
 210#define CMD_DMASTP              0x29
 211#define CMD_DMASTZ              0x0c
 212#define CMD_DMAWFE              0x36
 213#define CMD_DMAWFP              0x30
 214#define CMD_DMAWMB              0x13
 215
 216#define SZ_DMAADDH              3
 217#define SZ_DMAEND               1
 218#define SZ_DMAFLUSHP            2
 219#define SZ_DMALD                1
 220#define SZ_DMALDP               2
 221#define SZ_DMALP                2
 222#define SZ_DMALPEND             2
 223#define SZ_DMAKILL              1
 224#define SZ_DMAMOV               6
 225#define SZ_DMANOP               1
 226#define SZ_DMARMB               1
 227#define SZ_DMASEV               2
 228#define SZ_DMAST                1
 229#define SZ_DMASTP               2
 230#define SZ_DMASTZ               1
 231#define SZ_DMAWFE               2
 232#define SZ_DMAWFP               2
 233#define SZ_DMAWMB               1
 234#define SZ_DMAGO                6
 235
 236#define BRST_LEN(ccr)           ((((ccr) >> CC_SRCBRSTLEN_SHFT) & 0xf) + 1)
 237#define BRST_SIZE(ccr)          (1 << (((ccr) >> CC_SRCBRSTSIZE_SHFT) & 0x7))
 238
 239#define BYTE_TO_BURST(b, ccr)   ((b) / BRST_SIZE(ccr) / BRST_LEN(ccr))
 240#define BURST_TO_BYTE(c, ccr)   ((c) * BRST_SIZE(ccr) * BRST_LEN(ccr))
 241
 242/*
 243 * With 256 bytes, we can do more than 2.5MB and 5MB xfers per req
 244 * at 1byte/burst for P<->M and M<->M respectively.
 245 * For typical scenario, at 1word/burst, 10MB and 20MB xfers per req
 246 * should be enough for P<->M and M<->M respectively.
 247 */
 248#define MCODE_BUFF_PER_REQ      256
 249
 250/* Use this _only_ to wait on transient states */
 251#define UNTIL(t, s)     while (!(_state(t) & (s))) cpu_relax();
 252
 253#ifdef PL330_DEBUG_MCGEN
 254static unsigned cmd_line;
 255#define PL330_DBGCMD_DUMP(off, x...)    do { \
 256                                                printk("%x:", cmd_line); \
 257                                                printk(x); \
 258                                                cmd_line += off; \
 259                                        } while (0)
 260#define PL330_DBGMC_START(addr)         (cmd_line = addr)
 261#else
 262#define PL330_DBGCMD_DUMP(off, x...)    do {} while (0)
 263#define PL330_DBGMC_START(addr)         do {} while (0)
 264#endif
 265
 266/* The number of default descriptors */
 267
 268#define NR_DEFAULT_DESC 16
 269
 270/* Delay for runtime PM autosuspend, ms */
 271#define PL330_AUTOSUSPEND_DELAY 20
 272
 273/* Populated by the PL330 core driver for DMA API driver's info */
 274struct pl330_config {
 275        u32     periph_id;
 276#define DMAC_MODE_NS    (1 << 0)
 277        unsigned int    mode;
 278        unsigned int    data_bus_width:10; /* In number of bits */
 279        unsigned int    data_buf_dep:11;
 280        unsigned int    num_chan:4;
 281        unsigned int    num_peri:6;
 282        u32             peri_ns;
 283        unsigned int    num_events:6;
 284        u32             irq_ns;
 285};
 286
 287/**
 288 * Request Configuration.
 289 * The PL330 core does not modify this and uses the last
 290 * working configuration if the request doesn't provide any.
 291 *
 292 * The Client may want to provide this info only for the
 293 * first request and a request with new settings.
 294 */
 295struct pl330_reqcfg {
 296        /* Address Incrementing */
 297        unsigned dst_inc:1;
 298        unsigned src_inc:1;
 299
 300        /*
 301         * For now, the SRC & DST protection levels
 302         * and burst size/length are assumed same.
 303         */
 304        bool nonsecure;
 305        bool privileged;
 306        bool insnaccess;
 307        unsigned brst_len:5;
 308        unsigned brst_size:3; /* in power of 2 */
 309
 310        enum pl330_cachectrl dcctl;
 311        enum pl330_cachectrl scctl;
 312        enum pl330_byteswap swap;
 313        struct pl330_config *pcfg;
 314};
 315
 316/*
 317 * One cycle of DMAC operation.
 318 * There may be more than one xfer in a request.
 319 */
 320struct pl330_xfer {
 321        u32 src_addr;
 322        u32 dst_addr;
 323        /* Size to xfer */
 324        u32 bytes;
 325};
 326
 327/* The xfer callbacks are made with one of these arguments. */
 328enum pl330_op_err {
 329        /* The all xfers in the request were success. */
 330        PL330_ERR_NONE,
 331        /* If req aborted due to global error. */
 332        PL330_ERR_ABORT,
 333        /* If req failed due to problem with Channel. */
 334        PL330_ERR_FAIL,
 335};
 336
 337enum dmamov_dst {
 338        SAR = 0,
 339        CCR,
 340        DAR,
 341};
 342
 343enum pl330_dst {
 344        SRC = 0,
 345        DST,
 346};
 347
 348enum pl330_cond {
 349        SINGLE,
 350        BURST,
 351        ALWAYS,
 352};
 353
 354struct dma_pl330_desc;
 355
 356struct _pl330_req {
 357        u32 mc_bus;
 358        void *mc_cpu;
 359        struct dma_pl330_desc *desc;
 360};
 361
 362/* ToBeDone for tasklet */
 363struct _pl330_tbd {
 364        bool reset_dmac;
 365        bool reset_mngr;
 366        u8 reset_chan;
 367};
 368
 369/* A DMAC Thread */
 370struct pl330_thread {
 371        u8 id;
 372        int ev;
 373        /* If the channel is not yet acquired by any client */
 374        bool free;
 375        /* Parent DMAC */
 376        struct pl330_dmac *dmac;
 377        /* Only two at a time */
 378        struct _pl330_req req[2];
 379        /* Index of the last enqueued request */
 380        unsigned lstenq;
 381        /* Index of the last submitted request or -1 if the DMA is stopped */
 382        int req_running;
 383};
 384
 385enum pl330_dmac_state {
 386        UNINIT,
 387        INIT,
 388        DYING,
 389};
 390
 391enum desc_status {
 392        /* In the DMAC pool */
 393        FREE,
 394        /*
 395         * Allocated to some channel during prep_xxx
 396         * Also may be sitting on the work_list.
 397         */
 398        PREP,
 399        /*
 400         * Sitting on the work_list and already submitted
 401         * to the PL330 core. Not more than two descriptors
 402         * of a channel can be BUSY at any time.
 403         */
 404        BUSY,
 405        /*
 406         * Sitting on the channel work_list but xfer done
 407         * by PL330 core
 408         */
 409        DONE,
 410};
 411
 412struct dma_pl330_chan {
 413        /* Schedule desc completion */
 414        struct tasklet_struct task;
 415
 416        /* DMA-Engine Channel */
 417        struct dma_chan chan;
 418
 419        /* List of submitted descriptors */
 420        struct list_head submitted_list;
 421        /* List of issued descriptors */
 422        struct list_head work_list;
 423        /* List of completed descriptors */
 424        struct list_head completed_list;
 425
 426        /* Pointer to the DMAC that manages this channel,
 427         * NULL if the channel is available to be acquired.
 428         * As the parent, this DMAC also provides descriptors
 429         * to the channel.
 430         */
 431        struct pl330_dmac *dmac;
 432
 433        /* To protect channel manipulation */
 434        spinlock_t lock;
 435
 436        /*
 437         * Hardware channel thread of PL330 DMAC. NULL if the channel is
 438         * available.
 439         */
 440        struct pl330_thread *thread;
 441
 442        /* For D-to-M and M-to-D channels */
 443        int burst_sz; /* the peripheral fifo width */
 444        int burst_len; /* the number of burst */
 445        phys_addr_t fifo_addr;
 446        /* DMA-mapped view of the FIFO; may differ if an IOMMU is present */
 447        dma_addr_t fifo_dma;
 448        enum dma_data_direction dir;
 449        struct dma_slave_config slave_config;
 450
 451        /* for cyclic capability */
 452        bool cyclic;
 453
 454        /* for runtime pm tracking */
 455        bool active;
 456};
 457
 458struct pl330_dmac {
 459        /* DMA-Engine Device */
 460        struct dma_device ddma;
 461
 462        /* Holds info about sg limitations */
 463        struct device_dma_parameters dma_parms;
 464
 465        /* Pool of descriptors available for the DMAC's channels */
 466        struct list_head desc_pool;
 467        /* To protect desc_pool manipulation */
 468        spinlock_t pool_lock;
 469
 470        /* Size of MicroCode buffers for each channel. */
 471        unsigned mcbufsz;
 472        /* ioremap'ed address of PL330 registers. */
 473        void __iomem    *base;
 474        /* Populated by the PL330 core driver during pl330_add */
 475        struct pl330_config     pcfg;
 476
 477        spinlock_t              lock;
 478        /* Maximum possible events/irqs */
 479        int                     events[32];
 480        /* BUS address of MicroCode buffer */
 481        dma_addr_t              mcode_bus;
 482        /* CPU address of MicroCode buffer */
 483        void                    *mcode_cpu;
 484        /* List of all Channel threads */
 485        struct pl330_thread     *channels;
 486        /* Pointer to the MANAGER thread */
 487        struct pl330_thread     *manager;
 488        /* To handle bad news in interrupt */
 489        struct tasklet_struct   tasks;
 490        struct _pl330_tbd       dmac_tbd;
 491        /* State of DMAC operation */
 492        enum pl330_dmac_state   state;
 493        /* Holds list of reqs with due callbacks */
 494        struct list_head        req_done;
 495
 496        /* Peripheral channels connected to this DMAC */
 497        unsigned int num_peripherals;
 498        struct dma_pl330_chan *peripherals; /* keep at end */
 499        int quirks;
 500
 501        struct reset_control    *rstc;
 502        struct reset_control    *rstc_ocp;
 503};
 504
 505static struct pl330_of_quirks {
 506        char *quirk;
 507        int id;
 508} of_quirks[] = {
 509        {
 510                .quirk = "arm,pl330-broken-no-flushp",
 511                .id = PL330_QUIRK_BROKEN_NO_FLUSHP,
 512        }
 513};
 514
 515struct dma_pl330_desc {
 516        /* To attach to a queue as child */
 517        struct list_head node;
 518
 519        /* Descriptor for the DMA Engine API */
 520        struct dma_async_tx_descriptor txd;
 521
 522        /* Xfer for PL330 core */
 523        struct pl330_xfer px;
 524
 525        struct pl330_reqcfg rqcfg;
 526
 527        enum desc_status status;
 528
 529        int bytes_requested;
 530        bool last;
 531
 532        /* The channel which currently holds this desc */
 533        struct dma_pl330_chan *pchan;
 534
 535        enum dma_transfer_direction rqtype;
 536        /* Index of peripheral for the xfer. */
 537        unsigned peri:5;
 538        /* Hook to attach to DMAC's list of reqs with due callback */
 539        struct list_head rqd;
 540};
 541
 542struct _xfer_spec {
 543        u32 ccr;
 544        struct dma_pl330_desc *desc;
 545};
 546
 547static int pl330_config_write(struct dma_chan *chan,
 548                        struct dma_slave_config *slave_config,
 549                        enum dma_transfer_direction direction);
 550
 551static inline bool _queue_full(struct pl330_thread *thrd)
 552{
 553        return thrd->req[0].desc != NULL && thrd->req[1].desc != NULL;
 554}
 555
 556static inline bool is_manager(struct pl330_thread *thrd)
 557{
 558        return thrd->dmac->manager == thrd;
 559}
 560
 561/* If manager of the thread is in Non-Secure mode */
 562static inline bool _manager_ns(struct pl330_thread *thrd)
 563{
 564        return (thrd->dmac->pcfg.mode & DMAC_MODE_NS) ? true : false;
 565}
 566
 567static inline u32 get_revision(u32 periph_id)
 568{
 569        return (periph_id >> PERIPH_REV_SHIFT) & PERIPH_REV_MASK;
 570}
 571
 572static inline u32 _emit_END(unsigned dry_run, u8 buf[])
 573{
 574        if (dry_run)
 575                return SZ_DMAEND;
 576
 577        buf[0] = CMD_DMAEND;
 578
 579        PL330_DBGCMD_DUMP(SZ_DMAEND, "\tDMAEND\n");
 580
 581        return SZ_DMAEND;
 582}
 583
 584static inline u32 _emit_FLUSHP(unsigned dry_run, u8 buf[], u8 peri)
 585{
 586        if (dry_run)
 587                return SZ_DMAFLUSHP;
 588
 589        buf[0] = CMD_DMAFLUSHP;
 590
 591        peri &= 0x1f;
 592        peri <<= 3;
 593        buf[1] = peri;
 594
 595        PL330_DBGCMD_DUMP(SZ_DMAFLUSHP, "\tDMAFLUSHP %u\n", peri >> 3);
 596
 597        return SZ_DMAFLUSHP;
 598}
 599
 600static inline u32 _emit_LD(unsigned dry_run, u8 buf[],  enum pl330_cond cond)
 601{
 602        if (dry_run)
 603                return SZ_DMALD;
 604
 605        buf[0] = CMD_DMALD;
 606
 607        if (cond == SINGLE)
 608                buf[0] |= (0 << 1) | (1 << 0);
 609        else if (cond == BURST)
 610                buf[0] |= (1 << 1) | (1 << 0);
 611
 612        PL330_DBGCMD_DUMP(SZ_DMALD, "\tDMALD%c\n",
 613                cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
 614
 615        return SZ_DMALD;
 616}
 617
 618static inline u32 _emit_LDP(unsigned dry_run, u8 buf[],
 619                enum pl330_cond cond, u8 peri)
 620{
 621        if (dry_run)
 622                return SZ_DMALDP;
 623
 624        buf[0] = CMD_DMALDP;
 625
 626        if (cond == BURST)
 627                buf[0] |= (1 << 1);
 628
 629        peri &= 0x1f;
 630        peri <<= 3;
 631        buf[1] = peri;
 632
 633        PL330_DBGCMD_DUMP(SZ_DMALDP, "\tDMALDP%c %u\n",
 634                cond == SINGLE ? 'S' : 'B', peri >> 3);
 635
 636        return SZ_DMALDP;
 637}
 638
 639static inline u32 _emit_LP(unsigned dry_run, u8 buf[],
 640                unsigned loop, u8 cnt)
 641{
 642        if (dry_run)
 643                return SZ_DMALP;
 644
 645        buf[0] = CMD_DMALP;
 646
 647        if (loop)
 648                buf[0] |= (1 << 1);
 649
 650        cnt--; /* DMAC increments by 1 internally */
 651        buf[1] = cnt;
 652
 653        PL330_DBGCMD_DUMP(SZ_DMALP, "\tDMALP_%c %u\n", loop ? '1' : '0', cnt);
 654
 655        return SZ_DMALP;
 656}
 657
 658struct _arg_LPEND {
 659        enum pl330_cond cond;
 660        bool forever;
 661        unsigned loop;
 662        u8 bjump;
 663};
 664
 665static inline u32 _emit_LPEND(unsigned dry_run, u8 buf[],
 666                const struct _arg_LPEND *arg)
 667{
 668        enum pl330_cond cond = arg->cond;
 669        bool forever = arg->forever;
 670        unsigned loop = arg->loop;
 671        u8 bjump = arg->bjump;
 672
 673        if (dry_run)
 674                return SZ_DMALPEND;
 675
 676        buf[0] = CMD_DMALPEND;
 677
 678        if (loop)
 679                buf[0] |= (1 << 2);
 680
 681        if (!forever)
 682                buf[0] |= (1 << 4);
 683
 684        if (cond == SINGLE)
 685                buf[0] |= (0 << 1) | (1 << 0);
 686        else if (cond == BURST)
 687                buf[0] |= (1 << 1) | (1 << 0);
 688
 689        buf[1] = bjump;
 690
 691        PL330_DBGCMD_DUMP(SZ_DMALPEND, "\tDMALP%s%c_%c bjmpto_%x\n",
 692                        forever ? "FE" : "END",
 693                        cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'),
 694                        loop ? '1' : '0',
 695                        bjump);
 696
 697        return SZ_DMALPEND;
 698}
 699
 700static inline u32 _emit_KILL(unsigned dry_run, u8 buf[])
 701{
 702        if (dry_run)
 703                return SZ_DMAKILL;
 704
 705        buf[0] = CMD_DMAKILL;
 706
 707        return SZ_DMAKILL;
 708}
 709
 710static inline u32 _emit_MOV(unsigned dry_run, u8 buf[],
 711                enum dmamov_dst dst, u32 val)
 712{
 713        if (dry_run)
 714                return SZ_DMAMOV;
 715
 716        buf[0] = CMD_DMAMOV;
 717        buf[1] = dst;
 718        buf[2] = val;
 719        buf[3] = val >> 8;
 720        buf[4] = val >> 16;
 721        buf[5] = val >> 24;
 722
 723        PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n",
 724                dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val);
 725
 726        return SZ_DMAMOV;
 727}
 728
 729static inline u32 _emit_RMB(unsigned dry_run, u8 buf[])
 730{
 731        if (dry_run)
 732                return SZ_DMARMB;
 733
 734        buf[0] = CMD_DMARMB;
 735
 736        PL330_DBGCMD_DUMP(SZ_DMARMB, "\tDMARMB\n");
 737
 738        return SZ_DMARMB;
 739}
 740
 741static inline u32 _emit_SEV(unsigned dry_run, u8 buf[], u8 ev)
 742{
 743        if (dry_run)
 744                return SZ_DMASEV;
 745
 746        buf[0] = CMD_DMASEV;
 747
 748        ev &= 0x1f;
 749        ev <<= 3;
 750        buf[1] = ev;
 751
 752        PL330_DBGCMD_DUMP(SZ_DMASEV, "\tDMASEV %u\n", ev >> 3);
 753
 754        return SZ_DMASEV;
 755}
 756
 757static inline u32 _emit_ST(unsigned dry_run, u8 buf[], enum pl330_cond cond)
 758{
 759        if (dry_run)
 760                return SZ_DMAST;
 761
 762        buf[0] = CMD_DMAST;
 763
 764        if (cond == SINGLE)
 765                buf[0] |= (0 << 1) | (1 << 0);
 766        else if (cond == BURST)
 767                buf[0] |= (1 << 1) | (1 << 0);
 768
 769        PL330_DBGCMD_DUMP(SZ_DMAST, "\tDMAST%c\n",
 770                cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
 771
 772        return SZ_DMAST;
 773}
 774
 775static inline u32 _emit_STP(unsigned dry_run, u8 buf[],
 776                enum pl330_cond cond, u8 peri)
 777{
 778        if (dry_run)
 779                return SZ_DMASTP;
 780
 781        buf[0] = CMD_DMASTP;
 782
 783        if (cond == BURST)
 784                buf[0] |= (1 << 1);
 785
 786        peri &= 0x1f;
 787        peri <<= 3;
 788        buf[1] = peri;
 789
 790        PL330_DBGCMD_DUMP(SZ_DMASTP, "\tDMASTP%c %u\n",
 791                cond == SINGLE ? 'S' : 'B', peri >> 3);
 792
 793        return SZ_DMASTP;
 794}
 795
 796static inline u32 _emit_WFP(unsigned dry_run, u8 buf[],
 797                enum pl330_cond cond, u8 peri)
 798{
 799        if (dry_run)
 800                return SZ_DMAWFP;
 801
 802        buf[0] = CMD_DMAWFP;
 803
 804        if (cond == SINGLE)
 805                buf[0] |= (0 << 1) | (0 << 0);
 806        else if (cond == BURST)
 807                buf[0] |= (1 << 1) | (0 << 0);
 808        else
 809                buf[0] |= (0 << 1) | (1 << 0);
 810
 811        peri &= 0x1f;
 812        peri <<= 3;
 813        buf[1] = peri;
 814
 815        PL330_DBGCMD_DUMP(SZ_DMAWFP, "\tDMAWFP%c %u\n",
 816                cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'P'), peri >> 3);
 817
 818        return SZ_DMAWFP;
 819}
 820
 821static inline u32 _emit_WMB(unsigned dry_run, u8 buf[])
 822{
 823        if (dry_run)
 824                return SZ_DMAWMB;
 825
 826        buf[0] = CMD_DMAWMB;
 827
 828        PL330_DBGCMD_DUMP(SZ_DMAWMB, "\tDMAWMB\n");
 829
 830        return SZ_DMAWMB;
 831}
 832
 833struct _arg_GO {
 834        u8 chan;
 835        u32 addr;
 836        unsigned ns;
 837};
 838
 839static inline u32 _emit_GO(unsigned dry_run, u8 buf[],
 840                const struct _arg_GO *arg)
 841{
 842        u8 chan = arg->chan;
 843        u32 addr = arg->addr;
 844        unsigned ns = arg->ns;
 845
 846        if (dry_run)
 847                return SZ_DMAGO;
 848
 849        buf[0] = CMD_DMAGO;
 850        buf[0] |= (ns << 1);
 851        buf[1] = chan & 0x7;
 852        buf[2] = addr;
 853        buf[3] = addr >> 8;
 854        buf[4] = addr >> 16;
 855        buf[5] = addr >> 24;
 856
 857        return SZ_DMAGO;
 858}
 859
 860#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
 861
 862/* Returns Time-Out */
 863static bool _until_dmac_idle(struct pl330_thread *thrd)
 864{
 865        void __iomem *regs = thrd->dmac->base;
 866        unsigned long loops = msecs_to_loops(5);
 867
 868        do {
 869                /* Until Manager is Idle */
 870                if (!(readl(regs + DBGSTATUS) & DBG_BUSY))
 871                        break;
 872
 873                cpu_relax();
 874        } while (--loops);
 875
 876        if (!loops)
 877                return true;
 878
 879        return false;
 880}
 881
 882static inline void _execute_DBGINSN(struct pl330_thread *thrd,
 883                u8 insn[], bool as_manager)
 884{
 885        void __iomem *regs = thrd->dmac->base;
 886        u32 val;
 887
 888        val = (insn[0] << 16) | (insn[1] << 24);
 889        if (!as_manager) {
 890                val |= (1 << 0);
 891                val |= (thrd->id << 8); /* Channel Number */
 892        }
 893        writel(val, regs + DBGINST0);
 894
 895        val = le32_to_cpu(*((__le32 *)&insn[2]));
 896        writel(val, regs + DBGINST1);
 897
 898        /* If timed out due to halted state-machine */
 899        if (_until_dmac_idle(thrd)) {
 900                dev_err(thrd->dmac->ddma.dev, "DMAC halted!\n");
 901                return;
 902        }
 903
 904        /* Get going */
 905        writel(0, regs + DBGCMD);
 906}
 907
 908static inline u32 _state(struct pl330_thread *thrd)
 909{
 910        void __iomem *regs = thrd->dmac->base;
 911        u32 val;
 912
 913        if (is_manager(thrd))
 914                val = readl(regs + DS) & 0xf;
 915        else
 916                val = readl(regs + CS(thrd->id)) & 0xf;
 917
 918        switch (val) {
 919        case DS_ST_STOP:
 920                return PL330_STATE_STOPPED;
 921        case DS_ST_EXEC:
 922                return PL330_STATE_EXECUTING;
 923        case DS_ST_CMISS:
 924                return PL330_STATE_CACHEMISS;
 925        case DS_ST_UPDTPC:
 926                return PL330_STATE_UPDTPC;
 927        case DS_ST_WFE:
 928                return PL330_STATE_WFE;
 929        case DS_ST_FAULT:
 930                return PL330_STATE_FAULTING;
 931        case DS_ST_ATBRR:
 932                if (is_manager(thrd))
 933                        return PL330_STATE_INVALID;
 934                else
 935                        return PL330_STATE_ATBARRIER;
 936        case DS_ST_QBUSY:
 937                if (is_manager(thrd))
 938                        return PL330_STATE_INVALID;
 939                else
 940                        return PL330_STATE_QUEUEBUSY;
 941        case DS_ST_WFP:
 942                if (is_manager(thrd))
 943                        return PL330_STATE_INVALID;
 944                else
 945                        return PL330_STATE_WFP;
 946        case DS_ST_KILL:
 947                if (is_manager(thrd))
 948                        return PL330_STATE_INVALID;
 949                else
 950                        return PL330_STATE_KILLING;
 951        case DS_ST_CMPLT:
 952                if (is_manager(thrd))
 953                        return PL330_STATE_INVALID;
 954                else
 955                        return PL330_STATE_COMPLETING;
 956        case DS_ST_FLTCMP:
 957                if (is_manager(thrd))
 958                        return PL330_STATE_INVALID;
 959                else
 960                        return PL330_STATE_FAULT_COMPLETING;
 961        default:
 962                return PL330_STATE_INVALID;
 963        }
 964}
 965
 966static void _stop(struct pl330_thread *thrd)
 967{
 968        void __iomem *regs = thrd->dmac->base;
 969        u8 insn[6] = {0, 0, 0, 0, 0, 0};
 970        u32 inten = readl(regs + INTEN);
 971
 972        if (_state(thrd) == PL330_STATE_FAULT_COMPLETING)
 973                UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
 974
 975        /* Return if nothing needs to be done */
 976        if (_state(thrd) == PL330_STATE_COMPLETING
 977                  || _state(thrd) == PL330_STATE_KILLING
 978                  || _state(thrd) == PL330_STATE_STOPPED)
 979                return;
 980
 981        _emit_KILL(0, insn);
 982
 983        _execute_DBGINSN(thrd, insn, is_manager(thrd));
 984
 985        /* clear the event */
 986        if (inten & (1 << thrd->ev))
 987                writel(1 << thrd->ev, regs + INTCLR);
 988        /* Stop generating interrupts for SEV */
 989        writel(inten & ~(1 << thrd->ev), regs + INTEN);
 990}
 991
 992/* Start doing req 'idx' of thread 'thrd' */
 993static bool _trigger(struct pl330_thread *thrd)
 994{
 995        void __iomem *regs = thrd->dmac->base;
 996        struct _pl330_req *req;
 997        struct dma_pl330_desc *desc;
 998        struct _arg_GO go;
 999        unsigned ns;
1000        u8 insn[6] = {0, 0, 0, 0, 0, 0};
1001        int idx;
1002
1003        /* Return if already ACTIVE */
1004        if (_state(thrd) != PL330_STATE_STOPPED)
1005                return true;
1006
1007        idx = 1 - thrd->lstenq;
1008        if (thrd->req[idx].desc != NULL) {
1009                req = &thrd->req[idx];
1010        } else {
1011                idx = thrd->lstenq;
1012                if (thrd->req[idx].desc != NULL)
1013                        req = &thrd->req[idx];
1014                else
1015                        req = NULL;
1016        }
1017
1018        /* Return if no request */
1019        if (!req)
1020                return true;
1021
1022        /* Return if req is running */
1023        if (idx == thrd->req_running)
1024                return true;
1025
1026        desc = req->desc;
1027
1028        ns = desc->rqcfg.nonsecure ? 1 : 0;
1029
1030        /* See 'Abort Sources' point-4 at Page 2-25 */
1031        if (_manager_ns(thrd) && !ns)
1032                dev_info(thrd->dmac->ddma.dev, "%s:%d Recipe for ABORT!\n",
1033                        __func__, __LINE__);
1034
1035        go.chan = thrd->id;
1036        go.addr = req->mc_bus;
1037        go.ns = ns;
1038        _emit_GO(0, insn, &go);
1039
1040        /* Set to generate interrupts for SEV */
1041        writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN);
1042
1043        /* Only manager can execute GO */
1044        _execute_DBGINSN(thrd, insn, true);
1045
1046        thrd->req_running = idx;
1047
1048        return true;
1049}
1050
1051static bool _start(struct pl330_thread *thrd)
1052{
1053        switch (_state(thrd)) {
1054        case PL330_STATE_FAULT_COMPLETING:
1055                UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
1056
1057                if (_state(thrd) == PL330_STATE_KILLING)
1058                        UNTIL(thrd, PL330_STATE_STOPPED)
1059                /* fall through */
1060
1061        case PL330_STATE_FAULTING:
1062                _stop(thrd);
1063                /* fall through */
1064
1065        case PL330_STATE_KILLING:
1066        case PL330_STATE_COMPLETING:
1067                UNTIL(thrd, PL330_STATE_STOPPED)
1068                /* fall through */
1069
1070        case PL330_STATE_STOPPED:
1071                return _trigger(thrd);
1072
1073        case PL330_STATE_WFP:
1074        case PL330_STATE_QUEUEBUSY:
1075        case PL330_STATE_ATBARRIER:
1076        case PL330_STATE_UPDTPC:
1077        case PL330_STATE_CACHEMISS:
1078        case PL330_STATE_EXECUTING:
1079                return true;
1080
1081        case PL330_STATE_WFE: /* For RESUME, nothing yet */
1082        default:
1083                return false;
1084        }
1085}
1086
1087static inline int _ldst_memtomem(unsigned dry_run, u8 buf[],
1088                const struct _xfer_spec *pxs, int cyc)
1089{
1090        int off = 0;
1091        struct pl330_config *pcfg = pxs->desc->rqcfg.pcfg;
1092
1093        /* check lock-up free version */
1094        if (get_revision(pcfg->periph_id) >= PERIPH_REV_R1P0) {
1095                while (cyc--) {
1096                        off += _emit_LD(dry_run, &buf[off], ALWAYS);
1097                        off += _emit_ST(dry_run, &buf[off], ALWAYS);
1098                }
1099        } else {
1100                while (cyc--) {
1101                        off += _emit_LD(dry_run, &buf[off], ALWAYS);
1102                        off += _emit_RMB(dry_run, &buf[off]);
1103                        off += _emit_ST(dry_run, &buf[off], ALWAYS);
1104                        off += _emit_WMB(dry_run, &buf[off]);
1105                }
1106        }
1107
1108        return off;
1109}
1110
1111static u32 _emit_load(unsigned int dry_run, u8 buf[],
1112        enum pl330_cond cond, enum dma_transfer_direction direction,
1113        u8 peri)
1114{
1115        int off = 0;
1116
1117        switch (direction) {
1118        case DMA_MEM_TO_MEM:
1119                /* fall through */
1120        case DMA_MEM_TO_DEV:
1121                off += _emit_LD(dry_run, &buf[off], cond);
1122                break;
1123
1124        case DMA_DEV_TO_MEM:
1125                if (cond == ALWAYS) {
1126                        off += _emit_LDP(dry_run, &buf[off], SINGLE,
1127                                peri);
1128                        off += _emit_LDP(dry_run, &buf[off], BURST,
1129                                peri);
1130                } else {
1131                        off += _emit_LDP(dry_run, &buf[off], cond,
1132                                peri);
1133                }
1134                break;
1135
1136        default:
1137                /* this code should be unreachable */
1138                WARN_ON(1);
1139                break;
1140        }
1141
1142        return off;
1143}
1144
1145static inline u32 _emit_store(unsigned int dry_run, u8 buf[],
1146        enum pl330_cond cond, enum dma_transfer_direction direction,
1147        u8 peri)
1148{
1149        int off = 0;
1150
1151        switch (direction) {
1152        case DMA_MEM_TO_MEM:
1153                /* fall through */
1154        case DMA_DEV_TO_MEM:
1155                off += _emit_ST(dry_run, &buf[off], cond);
1156                break;
1157
1158        case DMA_MEM_TO_DEV:
1159                if (cond == ALWAYS) {
1160                        off += _emit_STP(dry_run, &buf[off], SINGLE,
1161                                peri);
1162                        off += _emit_STP(dry_run, &buf[off], BURST,
1163                                peri);
1164                } else {
1165                        off += _emit_STP(dry_run, &buf[off], cond,
1166                                peri);
1167                }
1168                break;
1169
1170        default:
1171                /* this code should be unreachable */
1172                WARN_ON(1);
1173                break;
1174        }
1175
1176        return off;
1177}
1178
1179static inline int _ldst_peripheral(struct pl330_dmac *pl330,
1180                                 unsigned dry_run, u8 buf[],
1181                                 const struct _xfer_spec *pxs, int cyc,
1182                                 enum pl330_cond cond)
1183{
1184        int off = 0;
1185
1186        if (pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP)
1187                cond = BURST;
1188
1189        /*
1190         * do FLUSHP at beginning to clear any stale dma requests before the
1191         * first WFP.
1192         */
1193        if (!(pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP))
1194                off += _emit_FLUSHP(dry_run, &buf[off], pxs->desc->peri);
1195        while (cyc--) {
1196                off += _emit_WFP(dry_run, &buf[off], cond, pxs->desc->peri);
1197                off += _emit_load(dry_run, &buf[off], cond, pxs->desc->rqtype,
1198                        pxs->desc->peri);
1199                off += _emit_store(dry_run, &buf[off], cond, pxs->desc->rqtype,
1200                        pxs->desc->peri);
1201        }
1202
1203        return off;
1204}
1205
1206static int _bursts(struct pl330_dmac *pl330, unsigned dry_run, u8 buf[],
1207                const struct _xfer_spec *pxs, int cyc)
1208{
1209        int off = 0;
1210        enum pl330_cond cond = BRST_LEN(pxs->ccr) > 1 ? BURST : SINGLE;
1211
1212        switch (pxs->desc->rqtype) {
1213        case DMA_MEM_TO_DEV:
1214                /* fall through */
1215        case DMA_DEV_TO_MEM:
1216                off += _ldst_peripheral(pl330, dry_run, &buf[off], pxs, cyc,
1217                        cond);
1218                break;
1219
1220        case DMA_MEM_TO_MEM:
1221                off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc);
1222                break;
1223
1224        default:
1225                /* this code should be unreachable */
1226                WARN_ON(1);
1227                break;
1228        }
1229
1230        return off;
1231}
1232
1233/*
1234 * transfer dregs with single transfers to peripheral, or a reduced size burst
1235 * for mem-to-mem.
1236 */
1237static int _dregs(struct pl330_dmac *pl330, unsigned int dry_run, u8 buf[],
1238                const struct _xfer_spec *pxs, int transfer_length)
1239{
1240        int off = 0;
1241        int dregs_ccr;
1242
1243        if (transfer_length == 0)
1244                return off;
1245
1246        switch (pxs->desc->rqtype) {
1247        case DMA_MEM_TO_DEV:
1248                /* fall through */
1249        case DMA_DEV_TO_MEM:
1250                off += _ldst_peripheral(pl330, dry_run, &buf[off], pxs,
1251                        transfer_length, SINGLE);
1252                break;
1253
1254        case DMA_MEM_TO_MEM:
1255                dregs_ccr = pxs->ccr;
1256                dregs_ccr &= ~((0xf << CC_SRCBRSTLEN_SHFT) |
1257                        (0xf << CC_DSTBRSTLEN_SHFT));
1258                dregs_ccr |= (((transfer_length - 1) & 0xf) <<
1259                        CC_SRCBRSTLEN_SHFT);
1260                dregs_ccr |= (((transfer_length - 1) & 0xf) <<
1261                        CC_DSTBRSTLEN_SHFT);
1262                off += _emit_MOV(dry_run, &buf[off], CCR, dregs_ccr);
1263                off += _ldst_memtomem(dry_run, &buf[off], pxs, 1);
1264                break;
1265
1266        default:
1267                /* this code should be unreachable */
1268                WARN_ON(1);
1269                break;
1270        }
1271
1272        return off;
1273}
1274
1275/* Returns bytes consumed and updates bursts */
1276static inline int _loop(struct pl330_dmac *pl330, unsigned dry_run, u8 buf[],
1277                unsigned long *bursts, const struct _xfer_spec *pxs)
1278{
1279        int cyc, cycmax, szlp, szlpend, szbrst, off;
1280        unsigned lcnt0, lcnt1, ljmp0, ljmp1;
1281        struct _arg_LPEND lpend;
1282
1283        if (*bursts == 1)
1284                return _bursts(pl330, dry_run, buf, pxs, 1);
1285
1286        /* Max iterations possible in DMALP is 256 */
1287        if (*bursts >= 256*256) {
1288                lcnt1 = 256;
1289                lcnt0 = 256;
1290                cyc = *bursts / lcnt1 / lcnt0;
1291        } else if (*bursts > 256) {
1292                lcnt1 = 256;
1293                lcnt0 = *bursts / lcnt1;
1294                cyc = 1;
1295        } else {
1296                lcnt1 = *bursts;
1297                lcnt0 = 0;
1298                cyc = 1;
1299        }
1300
1301        szlp = _emit_LP(1, buf, 0, 0);
1302        szbrst = _bursts(pl330, 1, buf, pxs, 1);
1303
1304        lpend.cond = ALWAYS;
1305        lpend.forever = false;
1306        lpend.loop = 0;
1307        lpend.bjump = 0;
1308        szlpend = _emit_LPEND(1, buf, &lpend);
1309
1310        if (lcnt0) {
1311                szlp *= 2;
1312                szlpend *= 2;
1313        }
1314
1315        /*
1316         * Max bursts that we can unroll due to limit on the
1317         * size of backward jump that can be encoded in DMALPEND
1318         * which is 8-bits and hence 255
1319         */
1320        cycmax = (255 - (szlp + szlpend)) / szbrst;
1321
1322        cyc = (cycmax < cyc) ? cycmax : cyc;
1323
1324        off = 0;
1325
1326        if (lcnt0) {
1327                off += _emit_LP(dry_run, &buf[off], 0, lcnt0);
1328                ljmp0 = off;
1329        }
1330
1331        off += _emit_LP(dry_run, &buf[off], 1, lcnt1);
1332        ljmp1 = off;
1333
1334        off += _bursts(pl330, dry_run, &buf[off], pxs, cyc);
1335
1336        lpend.cond = ALWAYS;
1337        lpend.forever = false;
1338        lpend.loop = 1;
1339        lpend.bjump = off - ljmp1;
1340        off += _emit_LPEND(dry_run, &buf[off], &lpend);
1341
1342        if (lcnt0) {
1343                lpend.cond = ALWAYS;
1344                lpend.forever = false;
1345                lpend.loop = 0;
1346                lpend.bjump = off - ljmp0;
1347                off += _emit_LPEND(dry_run, &buf[off], &lpend);
1348        }
1349
1350        *bursts = lcnt1 * cyc;
1351        if (lcnt0)
1352                *bursts *= lcnt0;
1353
1354        return off;
1355}
1356
1357static inline int _setup_loops(struct pl330_dmac *pl330,
1358                               unsigned dry_run, u8 buf[],
1359                               const struct _xfer_spec *pxs)
1360{
1361        struct pl330_xfer *x = &pxs->desc->px;
1362        u32 ccr = pxs->ccr;
1363        unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr);
1364        int num_dregs = (x->bytes - BURST_TO_BYTE(bursts, ccr)) /
1365                BRST_SIZE(ccr);
1366        int off = 0;
1367
1368        while (bursts) {
1369                c = bursts;
1370                off += _loop(pl330, dry_run, &buf[off], &c, pxs);
1371                bursts -= c;
1372        }
1373        off += _dregs(pl330, dry_run, &buf[off], pxs, num_dregs);
1374
1375        return off;
1376}
1377
1378static inline int _setup_xfer(struct pl330_dmac *pl330,
1379                              unsigned dry_run, u8 buf[],
1380                              const struct _xfer_spec *pxs)
1381{
1382        struct pl330_xfer *x = &pxs->desc->px;
1383        int off = 0;
1384
1385        /* DMAMOV SAR, x->src_addr */
1386        off += _emit_MOV(dry_run, &buf[off], SAR, x->src_addr);
1387        /* DMAMOV DAR, x->dst_addr */
1388        off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr);
1389
1390        /* Setup Loop(s) */
1391        off += _setup_loops(pl330, dry_run, &buf[off], pxs);
1392
1393        return off;
1394}
1395
1396/*
1397 * A req is a sequence of one or more xfer units.
1398 * Returns the number of bytes taken to setup the MC for the req.
1399 */
1400static int _setup_req(struct pl330_dmac *pl330, unsigned dry_run,
1401                      struct pl330_thread *thrd, unsigned index,
1402                      struct _xfer_spec *pxs)
1403{
1404        struct _pl330_req *req = &thrd->req[index];
1405        u8 *buf = req->mc_cpu;
1406        int off = 0;
1407
1408        PL330_DBGMC_START(req->mc_bus);
1409
1410        /* DMAMOV CCR, ccr */
1411        off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr);
1412
1413        off += _setup_xfer(pl330, dry_run, &buf[off], pxs);
1414
1415        /* DMASEV peripheral/event */
1416        off += _emit_SEV(dry_run, &buf[off], thrd->ev);
1417        /* DMAEND */
1418        off += _emit_END(dry_run, &buf[off]);
1419
1420        return off;
1421}
1422
1423static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc)
1424{
1425        u32 ccr = 0;
1426
1427        if (rqc->src_inc)
1428                ccr |= CC_SRCINC;
1429
1430        if (rqc->dst_inc)
1431                ccr |= CC_DSTINC;
1432
1433        /* We set same protection levels for Src and DST for now */
1434        if (rqc->privileged)
1435                ccr |= CC_SRCPRI | CC_DSTPRI;
1436        if (rqc->nonsecure)
1437                ccr |= CC_SRCNS | CC_DSTNS;
1438        if (rqc->insnaccess)
1439                ccr |= CC_SRCIA | CC_DSTIA;
1440
1441        ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT);
1442        ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT);
1443
1444        ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT);
1445        ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT);
1446
1447        ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT);
1448        ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT);
1449
1450        ccr |= (rqc->swap << CC_SWAP_SHFT);
1451
1452        return ccr;
1453}
1454
1455/*
1456 * Submit a list of xfers after which the client wants notification.
1457 * Client is not notified after each xfer unit, just once after all
1458 * xfer units are done or some error occurs.
1459 */
1460static int pl330_submit_req(struct pl330_thread *thrd,
1461        struct dma_pl330_desc *desc)
1462{
1463        struct pl330_dmac *pl330 = thrd->dmac;
1464        struct _xfer_spec xs;
1465        unsigned long flags;
1466        unsigned idx;
1467        u32 ccr;
1468        int ret = 0;
1469
1470        switch (desc->rqtype) {
1471        case DMA_MEM_TO_DEV:
1472                break;
1473
1474        case DMA_DEV_TO_MEM:
1475                break;
1476
1477        case DMA_MEM_TO_MEM:
1478                break;
1479
1480        default:
1481                return -ENOTSUPP;
1482        }
1483
1484        if (pl330->state == DYING
1485                || pl330->dmac_tbd.reset_chan & (1 << thrd->id)) {
1486                dev_info(thrd->dmac->ddma.dev, "%s:%d\n",
1487                        __func__, __LINE__);
1488                return -EAGAIN;
1489        }
1490
1491        /* If request for non-existing peripheral */
1492        if (desc->rqtype != DMA_MEM_TO_MEM &&
1493            desc->peri >= pl330->pcfg.num_peri) {
1494                dev_info(thrd->dmac->ddma.dev,
1495                                "%s:%d Invalid peripheral(%u)!\n",
1496                                __func__, __LINE__, desc->peri);
1497                return -EINVAL;
1498        }
1499
1500        spin_lock_irqsave(&pl330->lock, flags);
1501
1502        if (_queue_full(thrd)) {
1503                ret = -EAGAIN;
1504                goto xfer_exit;
1505        }
1506
1507        /* Prefer Secure Channel */
1508        if (!_manager_ns(thrd))
1509                desc->rqcfg.nonsecure = 0;
1510        else
1511                desc->rqcfg.nonsecure = 1;
1512
1513        ccr = _prepare_ccr(&desc->rqcfg);
1514
1515        idx = thrd->req[0].desc == NULL ? 0 : 1;
1516
1517        xs.ccr = ccr;
1518        xs.desc = desc;
1519
1520        /* First dry run to check if req is acceptable */
1521        ret = _setup_req(pl330, 1, thrd, idx, &xs);
1522        if (ret < 0)
1523                goto xfer_exit;
1524
1525        if (ret > pl330->mcbufsz / 2) {
1526                dev_info(pl330->ddma.dev, "%s:%d Try increasing mcbufsz (%i/%i)\n",
1527                                __func__, __LINE__, ret, pl330->mcbufsz / 2);
1528                ret = -ENOMEM;
1529                goto xfer_exit;
1530        }
1531
1532        /* Hook the request */
1533        thrd->lstenq = idx;
1534        thrd->req[idx].desc = desc;
1535        _setup_req(pl330, 0, thrd, idx, &xs);
1536
1537        ret = 0;
1538
1539xfer_exit:
1540        spin_unlock_irqrestore(&pl330->lock, flags);
1541
1542        return ret;
1543}
1544
1545static void dma_pl330_rqcb(struct dma_pl330_desc *desc, enum pl330_op_err err)
1546{
1547        struct dma_pl330_chan *pch;
1548        unsigned long flags;
1549
1550        if (!desc)
1551                return;
1552
1553        pch = desc->pchan;
1554
1555        /* If desc aborted */
1556        if (!pch)
1557                return;
1558
1559        spin_lock_irqsave(&pch->lock, flags);
1560
1561        desc->status = DONE;
1562
1563        spin_unlock_irqrestore(&pch->lock, flags);
1564
1565        tasklet_schedule(&pch->task);
1566}
1567
1568static void pl330_dotask(unsigned long data)
1569{
1570        struct pl330_dmac *pl330 = (struct pl330_dmac *) data;
1571        unsigned long flags;
1572        int i;
1573
1574        spin_lock_irqsave(&pl330->lock, flags);
1575
1576        /* The DMAC itself gone nuts */
1577        if (pl330->dmac_tbd.reset_dmac) {
1578                pl330->state = DYING;
1579                /* Reset the manager too */
1580                pl330->dmac_tbd.reset_mngr = true;
1581                /* Clear the reset flag */
1582                pl330->dmac_tbd.reset_dmac = false;
1583        }
1584
1585        if (pl330->dmac_tbd.reset_mngr) {
1586                _stop(pl330->manager);
1587                /* Reset all channels */
1588                pl330->dmac_tbd.reset_chan = (1 << pl330->pcfg.num_chan) - 1;
1589                /* Clear the reset flag */
1590                pl330->dmac_tbd.reset_mngr = false;
1591        }
1592
1593        for (i = 0; i < pl330->pcfg.num_chan; i++) {
1594
1595                if (pl330->dmac_tbd.reset_chan & (1 << i)) {
1596                        struct pl330_thread *thrd = &pl330->channels[i];
1597                        void __iomem *regs = pl330->base;
1598                        enum pl330_op_err err;
1599
1600                        _stop(thrd);
1601
1602                        if (readl(regs + FSC) & (1 << thrd->id))
1603                                err = PL330_ERR_FAIL;
1604                        else
1605                                err = PL330_ERR_ABORT;
1606
1607                        spin_unlock_irqrestore(&pl330->lock, flags);
1608                        dma_pl330_rqcb(thrd->req[1 - thrd->lstenq].desc, err);
1609                        dma_pl330_rqcb(thrd->req[thrd->lstenq].desc, err);
1610                        spin_lock_irqsave(&pl330->lock, flags);
1611
1612                        thrd->req[0].desc = NULL;
1613                        thrd->req[1].desc = NULL;
1614                        thrd->req_running = -1;
1615
1616                        /* Clear the reset flag */
1617                        pl330->dmac_tbd.reset_chan &= ~(1 << i);
1618                }
1619        }
1620
1621        spin_unlock_irqrestore(&pl330->lock, flags);
1622
1623        return;
1624}
1625
1626/* Returns 1 if state was updated, 0 otherwise */
1627static int pl330_update(struct pl330_dmac *pl330)
1628{
1629        struct dma_pl330_desc *descdone;
1630        unsigned long flags;
1631        void __iomem *regs;
1632        u32 val;
1633        int id, ev, ret = 0;
1634
1635        regs = pl330->base;
1636
1637        spin_lock_irqsave(&pl330->lock, flags);
1638
1639        val = readl(regs + FSM) & 0x1;
1640        if (val)
1641                pl330->dmac_tbd.reset_mngr = true;
1642        else
1643                pl330->dmac_tbd.reset_mngr = false;
1644
1645        val = readl(regs + FSC) & ((1 << pl330->pcfg.num_chan) - 1);
1646        pl330->dmac_tbd.reset_chan |= val;
1647        if (val) {
1648                int i = 0;
1649                while (i < pl330->pcfg.num_chan) {
1650                        if (val & (1 << i)) {
1651                                dev_info(pl330->ddma.dev,
1652                                        "Reset Channel-%d\t CS-%x FTC-%x\n",
1653                                                i, readl(regs + CS(i)),
1654                                                readl(regs + FTC(i)));
1655                                _stop(&pl330->channels[i]);
1656                        }
1657                        i++;
1658                }
1659        }
1660
1661        /* Check which event happened i.e, thread notified */
1662        val = readl(regs + ES);
1663        if (pl330->pcfg.num_events < 32
1664                        && val & ~((1 << pl330->pcfg.num_events) - 1)) {
1665                pl330->dmac_tbd.reset_dmac = true;
1666                dev_err(pl330->ddma.dev, "%s:%d Unexpected!\n", __func__,
1667                        __LINE__);
1668                ret = 1;
1669                goto updt_exit;
1670        }
1671
1672        for (ev = 0; ev < pl330->pcfg.num_events; ev++) {
1673                if (val & (1 << ev)) { /* Event occurred */
1674                        struct pl330_thread *thrd;
1675                        u32 inten = readl(regs + INTEN);
1676                        int active;
1677
1678                        /* Clear the event */
1679                        if (inten & (1 << ev))
1680                                writel(1 << ev, regs + INTCLR);
1681
1682                        ret = 1;
1683
1684                        id = pl330->events[ev];
1685
1686                        thrd = &pl330->channels[id];
1687
1688                        active = thrd->req_running;
1689                        if (active == -1) /* Aborted */
1690                                continue;
1691
1692                        /* Detach the req */
1693                        descdone = thrd->req[active].desc;
1694                        thrd->req[active].desc = NULL;
1695
1696                        thrd->req_running = -1;
1697
1698                        /* Get going again ASAP */
1699                        _start(thrd);
1700
1701                        /* For now, just make a list of callbacks to be done */
1702                        list_add_tail(&descdone->rqd, &pl330->req_done);
1703                }
1704        }
1705
1706        /* Now that we are in no hurry, do the callbacks */
1707        while (!list_empty(&pl330->req_done)) {
1708                descdone = list_first_entry(&pl330->req_done,
1709                                            struct dma_pl330_desc, rqd);
1710                list_del(&descdone->rqd);
1711                spin_unlock_irqrestore(&pl330->lock, flags);
1712                dma_pl330_rqcb(descdone, PL330_ERR_NONE);
1713                spin_lock_irqsave(&pl330->lock, flags);
1714        }
1715
1716updt_exit:
1717        spin_unlock_irqrestore(&pl330->lock, flags);
1718
1719        if (pl330->dmac_tbd.reset_dmac
1720                        || pl330->dmac_tbd.reset_mngr
1721                        || pl330->dmac_tbd.reset_chan) {
1722                ret = 1;
1723                tasklet_schedule(&pl330->tasks);
1724        }
1725
1726        return ret;
1727}
1728
1729/* Reserve an event */
1730static inline int _alloc_event(struct pl330_thread *thrd)
1731{
1732        struct pl330_dmac *pl330 = thrd->dmac;
1733        int ev;
1734
1735        for (ev = 0; ev < pl330->pcfg.num_events; ev++)
1736                if (pl330->events[ev] == -1) {
1737                        pl330->events[ev] = thrd->id;
1738                        return ev;
1739                }
1740
1741        return -1;
1742}
1743
1744static bool _chan_ns(const struct pl330_dmac *pl330, int i)
1745{
1746        return pl330->pcfg.irq_ns & (1 << i);
1747}
1748
1749/* Upon success, returns IdentityToken for the
1750 * allocated channel, NULL otherwise.
1751 */
1752static struct pl330_thread *pl330_request_channel(struct pl330_dmac *pl330)
1753{
1754        struct pl330_thread *thrd = NULL;
1755        int chans, i;
1756
1757        if (pl330->state == DYING)
1758                return NULL;
1759
1760        chans = pl330->pcfg.num_chan;
1761
1762        for (i = 0; i < chans; i++) {
1763                thrd = &pl330->channels[i];
1764                if ((thrd->free) && (!_manager_ns(thrd) ||
1765                                        _chan_ns(pl330, i))) {
1766                        thrd->ev = _alloc_event(thrd);
1767                        if (thrd->ev >= 0) {
1768                                thrd->free = false;
1769                                thrd->lstenq = 1;
1770                                thrd->req[0].desc = NULL;
1771                                thrd->req[1].desc = NULL;
1772                                thrd->req_running = -1;
1773                                break;
1774                        }
1775                }
1776                thrd = NULL;
1777        }
1778
1779        return thrd;
1780}
1781
1782/* Release an event */
1783static inline void _free_event(struct pl330_thread *thrd, int ev)
1784{
1785        struct pl330_dmac *pl330 = thrd->dmac;
1786
1787        /* If the event is valid and was held by the thread */
1788        if (ev >= 0 && ev < pl330->pcfg.num_events
1789                        && pl330->events[ev] == thrd->id)
1790                pl330->events[ev] = -1;
1791}
1792
1793static void pl330_release_channel(struct pl330_thread *thrd)
1794{
1795        if (!thrd || thrd->free)
1796                return;
1797
1798        _stop(thrd);
1799
1800        dma_pl330_rqcb(thrd->req[1 - thrd->lstenq].desc, PL330_ERR_ABORT);
1801        dma_pl330_rqcb(thrd->req[thrd->lstenq].desc, PL330_ERR_ABORT);
1802
1803        _free_event(thrd, thrd->ev);
1804        thrd->free = true;
1805}
1806
1807/* Initialize the structure for PL330 configuration, that can be used
1808 * by the client driver the make best use of the DMAC
1809 */
1810static void read_dmac_config(struct pl330_dmac *pl330)
1811{
1812        void __iomem *regs = pl330->base;
1813        u32 val;
1814
1815        val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT;
1816        val &= CRD_DATA_WIDTH_MASK;
1817        pl330->pcfg.data_bus_width = 8 * (1 << val);
1818
1819        val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT;
1820        val &= CRD_DATA_BUFF_MASK;
1821        pl330->pcfg.data_buf_dep = val + 1;
1822
1823        val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT;
1824        val &= CR0_NUM_CHANS_MASK;
1825        val += 1;
1826        pl330->pcfg.num_chan = val;
1827
1828        val = readl(regs + CR0);
1829        if (val & CR0_PERIPH_REQ_SET) {
1830                val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK;
1831                val += 1;
1832                pl330->pcfg.num_peri = val;
1833                pl330->pcfg.peri_ns = readl(regs + CR4);
1834        } else {
1835                pl330->pcfg.num_peri = 0;
1836        }
1837
1838        val = readl(regs + CR0);
1839        if (val & CR0_BOOT_MAN_NS)
1840                pl330->pcfg.mode |= DMAC_MODE_NS;
1841        else
1842                pl330->pcfg.mode &= ~DMAC_MODE_NS;
1843
1844        val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT;
1845        val &= CR0_NUM_EVENTS_MASK;
1846        val += 1;
1847        pl330->pcfg.num_events = val;
1848
1849        pl330->pcfg.irq_ns = readl(regs + CR3);
1850}
1851
1852static inline void _reset_thread(struct pl330_thread *thrd)
1853{
1854        struct pl330_dmac *pl330 = thrd->dmac;
1855
1856        thrd->req[0].mc_cpu = pl330->mcode_cpu
1857                                + (thrd->id * pl330->mcbufsz);
1858        thrd->req[0].mc_bus = pl330->mcode_bus
1859                                + (thrd->id * pl330->mcbufsz);
1860        thrd->req[0].desc = NULL;
1861
1862        thrd->req[1].mc_cpu = thrd->req[0].mc_cpu
1863                                + pl330->mcbufsz / 2;
1864        thrd->req[1].mc_bus = thrd->req[0].mc_bus
1865                                + pl330->mcbufsz / 2;
1866        thrd->req[1].desc = NULL;
1867
1868        thrd->req_running = -1;
1869}
1870
1871static int dmac_alloc_threads(struct pl330_dmac *pl330)
1872{
1873        int chans = pl330->pcfg.num_chan;
1874        struct pl330_thread *thrd;
1875        int i;
1876
1877        /* Allocate 1 Manager and 'chans' Channel threads */
1878        pl330->channels = kcalloc(1 + chans, sizeof(*thrd),
1879                                        GFP_KERNEL);
1880        if (!pl330->channels)
1881                return -ENOMEM;
1882
1883        /* Init Channel threads */
1884        for (i = 0; i < chans; i++) {
1885                thrd = &pl330->channels[i];
1886                thrd->id = i;
1887                thrd->dmac = pl330;
1888                _reset_thread(thrd);
1889                thrd->free = true;
1890        }
1891
1892        /* MANAGER is indexed at the end */
1893        thrd = &pl330->channels[chans];
1894        thrd->id = chans;
1895        thrd->dmac = pl330;
1896        thrd->free = false;
1897        pl330->manager = thrd;
1898
1899        return 0;
1900}
1901
1902static int dmac_alloc_resources(struct pl330_dmac *pl330)
1903{
1904        int chans = pl330->pcfg.num_chan;
1905        int ret;
1906
1907        /*
1908         * Alloc MicroCode buffer for 'chans' Channel threads.
1909         * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN)
1910         */
1911        pl330->mcode_cpu = dma_alloc_attrs(pl330->ddma.dev,
1912                                chans * pl330->mcbufsz,
1913                                &pl330->mcode_bus, GFP_KERNEL,
1914                                DMA_ATTR_PRIVILEGED);
1915        if (!pl330->mcode_cpu) {
1916                dev_err(pl330->ddma.dev, "%s:%d Can't allocate memory!\n",
1917                        __func__, __LINE__);
1918                return -ENOMEM;
1919        }
1920
1921        ret = dmac_alloc_threads(pl330);
1922        if (ret) {
1923                dev_err(pl330->ddma.dev, "%s:%d Can't to create channels for DMAC!\n",
1924                        __func__, __LINE__);
1925                dma_free_coherent(pl330->ddma.dev,
1926                                chans * pl330->mcbufsz,
1927                                pl330->mcode_cpu, pl330->mcode_bus);
1928                return ret;
1929        }
1930
1931        return 0;
1932}
1933
1934static int pl330_add(struct pl330_dmac *pl330)
1935{
1936        int i, ret;
1937
1938        /* Check if we can handle this DMAC */
1939        if ((pl330->pcfg.periph_id & 0xfffff) != PERIPH_ID_VAL) {
1940                dev_err(pl330->ddma.dev, "PERIPH_ID 0x%x !\n",
1941                        pl330->pcfg.periph_id);
1942                return -EINVAL;
1943        }
1944
1945        /* Read the configuration of the DMAC */
1946        read_dmac_config(pl330);
1947
1948        if (pl330->pcfg.num_events == 0) {
1949                dev_err(pl330->ddma.dev, "%s:%d Can't work without events!\n",
1950                        __func__, __LINE__);
1951                return -EINVAL;
1952        }
1953
1954        spin_lock_init(&pl330->lock);
1955
1956        INIT_LIST_HEAD(&pl330->req_done);
1957
1958        /* Use default MC buffer size if not provided */
1959        if (!pl330->mcbufsz)
1960                pl330->mcbufsz = MCODE_BUFF_PER_REQ * 2;
1961
1962        /* Mark all events as free */
1963        for (i = 0; i < pl330->pcfg.num_events; i++)
1964                pl330->events[i] = -1;
1965
1966        /* Allocate resources needed by the DMAC */
1967        ret = dmac_alloc_resources(pl330);
1968        if (ret) {
1969                dev_err(pl330->ddma.dev, "Unable to create channels for DMAC\n");
1970                return ret;
1971        }
1972
1973        tasklet_init(&pl330->tasks, pl330_dotask, (unsigned long) pl330);
1974
1975        pl330->state = INIT;
1976
1977        return 0;
1978}
1979
1980static int dmac_free_threads(struct pl330_dmac *pl330)
1981{
1982        struct pl330_thread *thrd;
1983        int i;
1984
1985        /* Release Channel threads */
1986        for (i = 0; i < pl330->pcfg.num_chan; i++) {
1987                thrd = &pl330->channels[i];
1988                pl330_release_channel(thrd);
1989        }
1990
1991        /* Free memory */
1992        kfree(pl330->channels);
1993
1994        return 0;
1995}
1996
1997static void pl330_del(struct pl330_dmac *pl330)
1998{
1999        pl330->state = UNINIT;
2000
2001        tasklet_kill(&pl330->tasks);
2002
2003        /* Free DMAC resources */
2004        dmac_free_threads(pl330);
2005
2006        dma_free_coherent(pl330->ddma.dev,
2007                pl330->pcfg.num_chan * pl330->mcbufsz, pl330->mcode_cpu,
2008                pl330->mcode_bus);
2009}
2010
2011/* forward declaration */
2012static struct amba_driver pl330_driver;
2013
2014static inline struct dma_pl330_chan *
2015to_pchan(struct dma_chan *ch)
2016{
2017        if (!ch)
2018                return NULL;
2019
2020        return container_of(ch, struct dma_pl330_chan, chan);
2021}
2022
2023static inline struct dma_pl330_desc *
2024to_desc(struct dma_async_tx_descriptor *tx)
2025{
2026        return container_of(tx, struct dma_pl330_desc, txd);
2027}
2028
2029static inline void fill_queue(struct dma_pl330_chan *pch)
2030{
2031        struct dma_pl330_desc *desc;
2032        int ret;
2033
2034        list_for_each_entry(desc, &pch->work_list, node) {
2035
2036                /* If already submitted */
2037                if (desc->status == BUSY)
2038                        continue;
2039
2040                ret = pl330_submit_req(pch->thread, desc);
2041                if (!ret) {
2042                        desc->status = BUSY;
2043                } else if (ret == -EAGAIN) {
2044                        /* QFull or DMAC Dying */
2045                        break;
2046                } else {
2047                        /* Unacceptable request */
2048                        desc->status = DONE;
2049                        dev_err(pch->dmac->ddma.dev, "%s:%d Bad Desc(%d)\n",
2050                                        __func__, __LINE__, desc->txd.cookie);
2051                        tasklet_schedule(&pch->task);
2052                }
2053        }
2054}
2055
2056static void pl330_tasklet(unsigned long data)
2057{
2058        struct dma_pl330_chan *pch = (struct dma_pl330_chan *)data;
2059        struct dma_pl330_desc *desc, *_dt;
2060        unsigned long flags;
2061        bool power_down = false;
2062
2063        spin_lock_irqsave(&pch->lock, flags);
2064
2065        /* Pick up ripe tomatoes */
2066        list_for_each_entry_safe(desc, _dt, &pch->work_list, node)
2067                if (desc->status == DONE) {
2068                        if (!pch->cyclic)
2069                                dma_cookie_complete(&desc->txd);
2070                        list_move_tail(&desc->node, &pch->completed_list);
2071                }
2072
2073        /* Try to submit a req imm. next to the last completed cookie */
2074        fill_queue(pch);
2075
2076        if (list_empty(&pch->work_list)) {
2077                spin_lock(&pch->thread->dmac->lock);
2078                _stop(pch->thread);
2079                spin_unlock(&pch->thread->dmac->lock);
2080                power_down = true;
2081                pch->active = false;
2082        } else {
2083                /* Make sure the PL330 Channel thread is active */
2084                spin_lock(&pch->thread->dmac->lock);
2085                _start(pch->thread);
2086                spin_unlock(&pch->thread->dmac->lock);
2087        }
2088
2089        while (!list_empty(&pch->completed_list)) {
2090                struct dmaengine_desc_callback cb;
2091
2092                desc = list_first_entry(&pch->completed_list,
2093                                        struct dma_pl330_desc, node);
2094
2095                dmaengine_desc_get_callback(&desc->txd, &cb);
2096
2097                if (pch->cyclic) {
2098                        desc->status = PREP;
2099                        list_move_tail(&desc->node, &pch->work_list);
2100                        if (power_down) {
2101                                pch->active = true;
2102                                spin_lock(&pch->thread->dmac->lock);
2103                                _start(pch->thread);
2104                                spin_unlock(&pch->thread->dmac->lock);
2105                                power_down = false;
2106                        }
2107                } else {
2108                        desc->status = FREE;
2109                        list_move_tail(&desc->node, &pch->dmac->desc_pool);
2110                }
2111
2112                dma_descriptor_unmap(&desc->txd);
2113
2114                if (dmaengine_desc_callback_valid(&cb)) {
2115                        spin_unlock_irqrestore(&pch->lock, flags);
2116                        dmaengine_desc_callback_invoke(&cb, NULL);
2117                        spin_lock_irqsave(&pch->lock, flags);
2118                }
2119        }
2120        spin_unlock_irqrestore(&pch->lock, flags);
2121
2122        /* If work list empty, power down */
2123        if (power_down) {
2124                pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
2125                pm_runtime_put_autosuspend(pch->dmac->ddma.dev);
2126        }
2127}
2128
2129static struct dma_chan *of_dma_pl330_xlate(struct of_phandle_args *dma_spec,
2130                                                struct of_dma *ofdma)
2131{
2132        int count = dma_spec->args_count;
2133        struct pl330_dmac *pl330 = ofdma->of_dma_data;
2134        unsigned int chan_id;
2135
2136        if (!pl330)
2137                return NULL;
2138
2139        if (count != 1)
2140                return NULL;
2141
2142        chan_id = dma_spec->args[0];
2143        if (chan_id >= pl330->num_peripherals)
2144                return NULL;
2145
2146        return dma_get_slave_channel(&pl330->peripherals[chan_id].chan);
2147}
2148
2149static int pl330_alloc_chan_resources(struct dma_chan *chan)
2150{
2151        struct dma_pl330_chan *pch = to_pchan(chan);
2152        struct pl330_dmac *pl330 = pch->dmac;
2153        unsigned long flags;
2154
2155        spin_lock_irqsave(&pl330->lock, flags);
2156
2157        dma_cookie_init(chan);
2158        pch->cyclic = false;
2159
2160        pch->thread = pl330_request_channel(pl330);
2161        if (!pch->thread) {
2162                spin_unlock_irqrestore(&pl330->lock, flags);
2163                return -ENOMEM;
2164        }
2165
2166        tasklet_init(&pch->task, pl330_tasklet, (unsigned long) pch);
2167
2168        spin_unlock_irqrestore(&pl330->lock, flags);
2169
2170        return 1;
2171}
2172
2173/*
2174 * We need the data direction between the DMAC (the dma-mapping "device") and
2175 * the FIFO (the dmaengine "dev"), from the FIFO's point of view. Confusing!
2176 */
2177static enum dma_data_direction
2178pl330_dma_slave_map_dir(enum dma_transfer_direction dir)
2179{
2180        switch (dir) {
2181        case DMA_MEM_TO_DEV:
2182                return DMA_FROM_DEVICE;
2183        case DMA_DEV_TO_MEM:
2184                return DMA_TO_DEVICE;
2185        case DMA_DEV_TO_DEV:
2186                return DMA_BIDIRECTIONAL;
2187        default:
2188                return DMA_NONE;
2189        }
2190}
2191
2192static void pl330_unprep_slave_fifo(struct dma_pl330_chan *pch)
2193{
2194        if (pch->dir != DMA_NONE)
2195                dma_unmap_resource(pch->chan.device->dev, pch->fifo_dma,
2196                                   1 << pch->burst_sz, pch->dir, 0);
2197        pch->dir = DMA_NONE;
2198}
2199
2200
2201static bool pl330_prep_slave_fifo(struct dma_pl330_chan *pch,
2202                                  enum dma_transfer_direction dir)
2203{
2204        struct device *dev = pch->chan.device->dev;
2205        enum dma_data_direction dma_dir = pl330_dma_slave_map_dir(dir);
2206
2207        /* Already mapped for this config? */
2208        if (pch->dir == dma_dir)
2209                return true;
2210
2211        pl330_unprep_slave_fifo(pch);
2212        pch->fifo_dma = dma_map_resource(dev, pch->fifo_addr,
2213                                         1 << pch->burst_sz, dma_dir, 0);
2214        if (dma_mapping_error(dev, pch->fifo_dma))
2215                return false;
2216
2217        pch->dir = dma_dir;
2218        return true;
2219}
2220
2221static int fixup_burst_len(int max_burst_len, int quirks)
2222{
2223        if (quirks & PL330_QUIRK_BROKEN_NO_FLUSHP)
2224                return 1;
2225        else if (max_burst_len > PL330_MAX_BURST)
2226                return PL330_MAX_BURST;
2227        else if (max_burst_len < 1)
2228                return 1;
2229        else
2230                return max_burst_len;
2231}
2232
2233static int pl330_config_write(struct dma_chan *chan,
2234                        struct dma_slave_config *slave_config,
2235                        enum dma_transfer_direction direction)
2236{
2237        struct dma_pl330_chan *pch = to_pchan(chan);
2238
2239        pl330_unprep_slave_fifo(pch);
2240        if (direction == DMA_MEM_TO_DEV) {
2241                if (slave_config->dst_addr)
2242                        pch->fifo_addr = slave_config->dst_addr;
2243                if (slave_config->dst_addr_width)
2244                        pch->burst_sz = __ffs(slave_config->dst_addr_width);
2245                pch->burst_len = fixup_burst_len(slave_config->dst_maxburst,
2246                        pch->dmac->quirks);
2247        } else if (direction == DMA_DEV_TO_MEM) {
2248                if (slave_config->src_addr)
2249                        pch->fifo_addr = slave_config->src_addr;
2250                if (slave_config->src_addr_width)
2251                        pch->burst_sz = __ffs(slave_config->src_addr_width);
2252                pch->burst_len = fixup_burst_len(slave_config->src_maxburst,
2253                        pch->dmac->quirks);
2254        }
2255
2256        return 0;
2257}
2258
2259static int pl330_config(struct dma_chan *chan,
2260                        struct dma_slave_config *slave_config)
2261{
2262        struct dma_pl330_chan *pch = to_pchan(chan);
2263
2264        memcpy(&pch->slave_config, slave_config, sizeof(*slave_config));
2265
2266        return 0;
2267}
2268
2269static int pl330_terminate_all(struct dma_chan *chan)
2270{
2271        struct dma_pl330_chan *pch = to_pchan(chan);
2272        struct dma_pl330_desc *desc;
2273        unsigned long flags;
2274        struct pl330_dmac *pl330 = pch->dmac;
2275        bool power_down = false;
2276
2277        pm_runtime_get_sync(pl330->ddma.dev);
2278        spin_lock_irqsave(&pch->lock, flags);
2279
2280        spin_lock(&pl330->lock);
2281        _stop(pch->thread);
2282        pch->thread->req[0].desc = NULL;
2283        pch->thread->req[1].desc = NULL;
2284        pch->thread->req_running = -1;
2285        spin_unlock(&pl330->lock);
2286
2287        power_down = pch->active;
2288        pch->active = false;
2289
2290        /* Mark all desc done */
2291        list_for_each_entry(desc, &pch->submitted_list, node) {
2292                desc->status = FREE;
2293                dma_cookie_complete(&desc->txd);
2294        }
2295
2296        list_for_each_entry(desc, &pch->work_list , node) {
2297                desc->status = FREE;
2298                dma_cookie_complete(&desc->txd);
2299        }
2300
2301        list_splice_tail_init(&pch->submitted_list, &pl330->desc_pool);
2302        list_splice_tail_init(&pch->work_list, &pl330->desc_pool);
2303        list_splice_tail_init(&pch->completed_list, &pl330->desc_pool);
2304        spin_unlock_irqrestore(&pch->lock, flags);
2305        pm_runtime_mark_last_busy(pl330->ddma.dev);
2306        if (power_down)
2307                pm_runtime_put_autosuspend(pl330->ddma.dev);
2308        pm_runtime_put_autosuspend(pl330->ddma.dev);
2309
2310        return 0;
2311}
2312
2313/*
2314 * We don't support DMA_RESUME command because of hardware
2315 * limitations, so after pausing the channel we cannot restore
2316 * it to active state. We have to terminate channel and setup
2317 * DMA transfer again. This pause feature was implemented to
2318 * allow safely read residue before channel termination.
2319 */
2320static int pl330_pause(struct dma_chan *chan)
2321{
2322        struct dma_pl330_chan *pch = to_pchan(chan);
2323        struct pl330_dmac *pl330 = pch->dmac;
2324        unsigned long flags;
2325
2326        pm_runtime_get_sync(pl330->ddma.dev);
2327        spin_lock_irqsave(&pch->lock, flags);
2328
2329        spin_lock(&pl330->lock);
2330        _stop(pch->thread);
2331        spin_unlock(&pl330->lock);
2332
2333        spin_unlock_irqrestore(&pch->lock, flags);
2334        pm_runtime_mark_last_busy(pl330->ddma.dev);
2335        pm_runtime_put_autosuspend(pl330->ddma.dev);
2336
2337        return 0;
2338}
2339
2340static void pl330_free_chan_resources(struct dma_chan *chan)
2341{
2342        struct dma_pl330_chan *pch = to_pchan(chan);
2343        struct pl330_dmac *pl330 = pch->dmac;
2344        unsigned long flags;
2345
2346        tasklet_kill(&pch->task);
2347
2348        pm_runtime_get_sync(pch->dmac->ddma.dev);
2349        spin_lock_irqsave(&pl330->lock, flags);
2350
2351        pl330_release_channel(pch->thread);
2352        pch->thread = NULL;
2353
2354        if (pch->cyclic)
2355                list_splice_tail_init(&pch->work_list, &pch->dmac->desc_pool);
2356
2357        spin_unlock_irqrestore(&pl330->lock, flags);
2358        pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
2359        pm_runtime_put_autosuspend(pch->dmac->ddma.dev);
2360        pl330_unprep_slave_fifo(pch);
2361}
2362
2363static int pl330_get_current_xferred_count(struct dma_pl330_chan *pch,
2364                                           struct dma_pl330_desc *desc)
2365{
2366        struct pl330_thread *thrd = pch->thread;
2367        struct pl330_dmac *pl330 = pch->dmac;
2368        void __iomem *regs = thrd->dmac->base;
2369        u32 val, addr;
2370
2371        pm_runtime_get_sync(pl330->ddma.dev);
2372        val = addr = 0;
2373        if (desc->rqcfg.src_inc) {
2374                val = readl(regs + SA(thrd->id));
2375                addr = desc->px.src_addr;
2376        } else {
2377                val = readl(regs + DA(thrd->id));
2378                addr = desc->px.dst_addr;
2379        }
2380        pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
2381        pm_runtime_put_autosuspend(pl330->ddma.dev);
2382
2383        /* If DMAMOV hasn't finished yet, SAR/DAR can be zero */
2384        if (!val)
2385                return 0;
2386
2387        return val - addr;
2388}
2389
2390static enum dma_status
2391pl330_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
2392                 struct dma_tx_state *txstate)
2393{
2394        enum dma_status ret;
2395        unsigned long flags;
2396        struct dma_pl330_desc *desc, *running = NULL, *last_enq = NULL;
2397        struct dma_pl330_chan *pch = to_pchan(chan);
2398        unsigned int transferred, residual = 0;
2399
2400        ret = dma_cookie_status(chan, cookie, txstate);
2401
2402        if (!txstate)
2403                return ret;
2404
2405        if (ret == DMA_COMPLETE)
2406                goto out;
2407
2408        spin_lock_irqsave(&pch->lock, flags);
2409        spin_lock(&pch->thread->dmac->lock);
2410
2411        if (pch->thread->req_running != -1)
2412                running = pch->thread->req[pch->thread->req_running].desc;
2413
2414        last_enq = pch->thread->req[pch->thread->lstenq].desc;
2415
2416        /* Check in pending list */
2417        list_for_each_entry(desc, &pch->work_list, node) {
2418                if (desc->status == DONE)
2419                        transferred = desc->bytes_requested;
2420                else if (running && desc == running)
2421                        transferred =
2422                                pl330_get_current_xferred_count(pch, desc);
2423                else if (desc->status == BUSY)
2424                        /*
2425                         * Busy but not running means either just enqueued,
2426                         * or finished and not yet marked done
2427                         */
2428                        if (desc == last_enq)
2429                                transferred = 0;
2430                        else
2431                                transferred = desc->bytes_requested;
2432                else
2433                        transferred = 0;
2434                residual += desc->bytes_requested - transferred;
2435                if (desc->txd.cookie == cookie) {
2436                        switch (desc->status) {
2437                        case DONE:
2438                                ret = DMA_COMPLETE;
2439                                break;
2440                        case PREP:
2441                        case BUSY:
2442                                ret = DMA_IN_PROGRESS;
2443                                break;
2444                        default:
2445                                WARN_ON(1);
2446                        }
2447                        break;
2448                }
2449                if (desc->last)
2450                        residual = 0;
2451        }
2452        spin_unlock(&pch->thread->dmac->lock);
2453        spin_unlock_irqrestore(&pch->lock, flags);
2454
2455out:
2456        dma_set_residue(txstate, residual);
2457
2458        return ret;
2459}
2460
2461static void pl330_issue_pending(struct dma_chan *chan)
2462{
2463        struct dma_pl330_chan *pch = to_pchan(chan);
2464        unsigned long flags;
2465
2466        spin_lock_irqsave(&pch->lock, flags);
2467        if (list_empty(&pch->work_list)) {
2468                /*
2469                 * Warn on nothing pending. Empty submitted_list may
2470                 * break our pm_runtime usage counter as it is
2471                 * updated on work_list emptiness status.
2472                 */
2473                WARN_ON(list_empty(&pch->submitted_list));
2474                pch->active = true;
2475                pm_runtime_get_sync(pch->dmac->ddma.dev);
2476        }
2477        list_splice_tail_init(&pch->submitted_list, &pch->work_list);
2478        spin_unlock_irqrestore(&pch->lock, flags);
2479
2480        pl330_tasklet((unsigned long)pch);
2481}
2482
2483/*
2484 * We returned the last one of the circular list of descriptor(s)
2485 * from prep_xxx, so the argument to submit corresponds to the last
2486 * descriptor of the list.
2487 */
2488static dma_cookie_t pl330_tx_submit(struct dma_async_tx_descriptor *tx)
2489{
2490        struct dma_pl330_desc *desc, *last = to_desc(tx);
2491        struct dma_pl330_chan *pch = to_pchan(tx->chan);
2492        dma_cookie_t cookie;
2493        unsigned long flags;
2494
2495        spin_lock_irqsave(&pch->lock, flags);
2496
2497        /* Assign cookies to all nodes */
2498        while (!list_empty(&last->node)) {
2499                desc = list_entry(last->node.next, struct dma_pl330_desc, node);
2500                if (pch->cyclic) {
2501                        desc->txd.callback = last->txd.callback;
2502                        desc->txd.callback_param = last->txd.callback_param;
2503                }
2504                desc->last = false;
2505
2506                dma_cookie_assign(&desc->txd);
2507
2508                list_move_tail(&desc->node, &pch->submitted_list);
2509        }
2510
2511        last->last = true;
2512        cookie = dma_cookie_assign(&last->txd);
2513        list_add_tail(&last->node, &pch->submitted_list);
2514        spin_unlock_irqrestore(&pch->lock, flags);
2515
2516        return cookie;
2517}
2518
2519static inline void _init_desc(struct dma_pl330_desc *desc)
2520{
2521        desc->rqcfg.swap = SWAP_NO;
2522        desc->rqcfg.scctl = CCTRL0;
2523        desc->rqcfg.dcctl = CCTRL0;
2524        desc->txd.tx_submit = pl330_tx_submit;
2525
2526        INIT_LIST_HEAD(&desc->node);
2527}
2528
2529/* Returns the number of descriptors added to the DMAC pool */
2530static int add_desc(struct list_head *pool, spinlock_t *lock,
2531                    gfp_t flg, int count)
2532{
2533        struct dma_pl330_desc *desc;
2534        unsigned long flags;
2535        int i;
2536
2537        desc = kcalloc(count, sizeof(*desc), flg);
2538        if (!desc)
2539                return 0;
2540
2541        spin_lock_irqsave(lock, flags);
2542
2543        for (i = 0; i < count; i++) {
2544                _init_desc(&desc[i]);
2545                list_add_tail(&desc[i].node, pool);
2546        }
2547
2548        spin_unlock_irqrestore(lock, flags);
2549
2550        return count;
2551}
2552
2553static struct dma_pl330_desc *pluck_desc(struct list_head *pool,
2554                                         spinlock_t *lock)
2555{
2556        struct dma_pl330_desc *desc = NULL;
2557        unsigned long flags;
2558
2559        spin_lock_irqsave(lock, flags);
2560
2561        if (!list_empty(pool)) {
2562                desc = list_entry(pool->next,
2563                                struct dma_pl330_desc, node);
2564
2565                list_del_init(&desc->node);
2566
2567                desc->status = PREP;
2568                desc->txd.callback = NULL;
2569        }
2570
2571        spin_unlock_irqrestore(lock, flags);
2572
2573        return desc;
2574}
2575
2576static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch)
2577{
2578        struct pl330_dmac *pl330 = pch->dmac;
2579        u8 *peri_id = pch->chan.private;
2580        struct dma_pl330_desc *desc;
2581
2582        /* Pluck one desc from the pool of DMAC */
2583        desc = pluck_desc(&pl330->desc_pool, &pl330->pool_lock);
2584
2585        /* If the DMAC pool is empty, alloc new */
2586        if (!desc) {
2587                DEFINE_SPINLOCK(lock);
2588                LIST_HEAD(pool);
2589
2590                if (!add_desc(&pool, &lock, GFP_ATOMIC, 1))
2591                        return NULL;
2592
2593                desc = pluck_desc(&pool, &lock);
2594                WARN_ON(!desc || !list_empty(&pool));
2595        }
2596
2597        /* Initialize the descriptor */
2598        desc->pchan = pch;
2599        desc->txd.cookie = 0;
2600        async_tx_ack(&desc->txd);
2601
2602        desc->peri = peri_id ? pch->chan.chan_id : 0;
2603        desc->rqcfg.pcfg = &pch->dmac->pcfg;
2604
2605        dma_async_tx_descriptor_init(&desc->txd, &pch->chan);
2606
2607        return desc;
2608}
2609
2610static inline void fill_px(struct pl330_xfer *px,
2611                dma_addr_t dst, dma_addr_t src, size_t len)
2612{
2613        px->bytes = len;
2614        px->dst_addr = dst;
2615        px->src_addr = src;
2616}
2617
2618static struct dma_pl330_desc *
2619__pl330_prep_dma_memcpy(struct dma_pl330_chan *pch, dma_addr_t dst,
2620                dma_addr_t src, size_t len)
2621{
2622        struct dma_pl330_desc *desc = pl330_get_desc(pch);
2623
2624        if (!desc) {
2625                dev_err(pch->dmac->ddma.dev, "%s:%d Unable to fetch desc\n",
2626                        __func__, __LINE__);
2627                return NULL;
2628        }
2629
2630        /*
2631         * Ideally we should lookout for reqs bigger than
2632         * those that can be programmed with 256 bytes of
2633         * MC buffer, but considering a req size is seldom
2634         * going to be word-unaligned and more than 200MB,
2635         * we take it easy.
2636         * Also, should the limit is reached we'd rather
2637         * have the platform increase MC buffer size than
2638         * complicating this API driver.
2639         */
2640        fill_px(&desc->px, dst, src, len);
2641
2642        return desc;
2643}
2644
2645/* Call after fixing burst size */
2646static inline int get_burst_len(struct dma_pl330_desc *desc, size_t len)
2647{
2648        struct dma_pl330_chan *pch = desc->pchan;
2649        struct pl330_dmac *pl330 = pch->dmac;
2650        int burst_len;
2651
2652        burst_len = pl330->pcfg.data_bus_width / 8;
2653        burst_len *= pl330->pcfg.data_buf_dep / pl330->pcfg.num_chan;
2654        burst_len >>= desc->rqcfg.brst_size;
2655
2656        /* src/dst_burst_len can't be more than 16 */
2657        if (burst_len > PL330_MAX_BURST)
2658                burst_len = PL330_MAX_BURST;
2659
2660        return burst_len;
2661}
2662
2663static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic(
2664                struct dma_chan *chan, dma_addr_t dma_addr, size_t len,
2665                size_t period_len, enum dma_transfer_direction direction,
2666                unsigned long flags)
2667{
2668        struct dma_pl330_desc *desc = NULL, *first = NULL;
2669        struct dma_pl330_chan *pch = to_pchan(chan);
2670        struct pl330_dmac *pl330 = pch->dmac;
2671        unsigned int i;
2672        dma_addr_t dst;
2673        dma_addr_t src;
2674
2675        if (len % period_len != 0)
2676                return NULL;
2677
2678        if (!is_slave_direction(direction)) {
2679                dev_err(pch->dmac->ddma.dev, "%s:%d Invalid dma direction\n",
2680                __func__, __LINE__);
2681                return NULL;
2682        }
2683
2684        pl330_config_write(chan, &pch->slave_config, direction);
2685
2686        if (!pl330_prep_slave_fifo(pch, direction))
2687                return NULL;
2688
2689        for (i = 0; i < len / period_len; i++) {
2690                desc = pl330_get_desc(pch);
2691                if (!desc) {
2692                        dev_err(pch->dmac->ddma.dev, "%s:%d Unable to fetch desc\n",
2693                                __func__, __LINE__);
2694
2695                        if (!first)
2696                                return NULL;
2697
2698                        spin_lock_irqsave(&pl330->pool_lock, flags);
2699
2700                        while (!list_empty(&first->node)) {
2701                                desc = list_entry(first->node.next,
2702                                                struct dma_pl330_desc, node);
2703                                list_move_tail(&desc->node, &pl330->desc_pool);
2704                        }
2705
2706                        list_move_tail(&first->node, &pl330->desc_pool);
2707
2708                        spin_unlock_irqrestore(&pl330->pool_lock, flags);
2709
2710                        return NULL;
2711                }
2712
2713                switch (direction) {
2714                case DMA_MEM_TO_DEV:
2715                        desc->rqcfg.src_inc = 1;
2716                        desc->rqcfg.dst_inc = 0;
2717                        src = dma_addr;
2718                        dst = pch->fifo_dma;
2719                        break;
2720                case DMA_DEV_TO_MEM:
2721                        desc->rqcfg.src_inc = 0;
2722                        desc->rqcfg.dst_inc = 1;
2723                        src = pch->fifo_dma;
2724                        dst = dma_addr;
2725                        break;
2726                default:
2727                        break;
2728                }
2729
2730                desc->rqtype = direction;
2731                desc->rqcfg.brst_size = pch->burst_sz;
2732                desc->rqcfg.brst_len = pch->burst_len;
2733                desc->bytes_requested = period_len;
2734                fill_px(&desc->px, dst, src, period_len);
2735
2736                if (!first)
2737                        first = desc;
2738                else
2739                        list_add_tail(&desc->node, &first->node);
2740
2741                dma_addr += period_len;
2742        }
2743
2744        if (!desc)
2745                return NULL;
2746
2747        pch->cyclic = true;
2748        desc->txd.flags = flags;
2749
2750        return &desc->txd;
2751}
2752
2753static struct dma_async_tx_descriptor *
2754pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
2755                dma_addr_t src, size_t len, unsigned long flags)
2756{
2757        struct dma_pl330_desc *desc;
2758        struct dma_pl330_chan *pch = to_pchan(chan);
2759        struct pl330_dmac *pl330;
2760        int burst;
2761
2762        if (unlikely(!pch || !len))
2763                return NULL;
2764
2765        pl330 = pch->dmac;
2766
2767        desc = __pl330_prep_dma_memcpy(pch, dst, src, len);
2768        if (!desc)
2769                return NULL;
2770
2771        desc->rqcfg.src_inc = 1;
2772        desc->rqcfg.dst_inc = 1;
2773        desc->rqtype = DMA_MEM_TO_MEM;
2774
2775        /* Select max possible burst size */
2776        burst = pl330->pcfg.data_bus_width / 8;
2777
2778        /*
2779         * Make sure we use a burst size that aligns with all the memcpy
2780         * parameters because our DMA programming algorithm doesn't cope with
2781         * transfers which straddle an entry in the DMA device's MFIFO.
2782         */
2783        while ((src | dst | len) & (burst - 1))
2784                burst /= 2;
2785
2786        desc->rqcfg.brst_size = 0;
2787        while (burst != (1 << desc->rqcfg.brst_size))
2788                desc->rqcfg.brst_size++;
2789
2790        /*
2791         * If burst size is smaller than bus width then make sure we only
2792         * transfer one at a time to avoid a burst stradling an MFIFO entry.
2793         */
2794        if (desc->rqcfg.brst_size * 8 < pl330->pcfg.data_bus_width)
2795                desc->rqcfg.brst_len = 1;
2796
2797        desc->rqcfg.brst_len = get_burst_len(desc, len);
2798        desc->bytes_requested = len;
2799
2800        desc->txd.flags = flags;
2801
2802        return &desc->txd;
2803}
2804
2805static void __pl330_giveback_desc(struct pl330_dmac *pl330,
2806                                  struct dma_pl330_desc *first)
2807{
2808        unsigned long flags;
2809        struct dma_pl330_desc *desc;
2810
2811        if (!first)
2812                return;
2813
2814        spin_lock_irqsave(&pl330->pool_lock, flags);
2815
2816        while (!list_empty(&first->node)) {
2817                desc = list_entry(first->node.next,
2818                                struct dma_pl330_desc, node);
2819                list_move_tail(&desc->node, &pl330->desc_pool);
2820        }
2821
2822        list_move_tail(&first->node, &pl330->desc_pool);
2823
2824        spin_unlock_irqrestore(&pl330->pool_lock, flags);
2825}
2826
2827static struct dma_async_tx_descriptor *
2828pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
2829                unsigned int sg_len, enum dma_transfer_direction direction,
2830                unsigned long flg, void *context)
2831{
2832        struct dma_pl330_desc *first, *desc = NULL;
2833        struct dma_pl330_chan *pch = to_pchan(chan);
2834        struct scatterlist *sg;
2835        int i;
2836
2837        if (unlikely(!pch || !sgl || !sg_len))
2838                return NULL;
2839
2840        pl330_config_write(chan, &pch->slave_config, direction);
2841
2842        if (!pl330_prep_slave_fifo(pch, direction))
2843                return NULL;
2844
2845        first = NULL;
2846
2847        for_each_sg(sgl, sg, sg_len, i) {
2848
2849                desc = pl330_get_desc(pch);
2850                if (!desc) {
2851                        struct pl330_dmac *pl330 = pch->dmac;
2852
2853                        dev_err(pch->dmac->ddma.dev,
2854                                "%s:%d Unable to fetch desc\n",
2855                                __func__, __LINE__);
2856                        __pl330_giveback_desc(pl330, first);
2857
2858                        return NULL;
2859                }
2860
2861                if (!first)
2862                        first = desc;
2863                else
2864                        list_add_tail(&desc->node, &first->node);
2865
2866                if (direction == DMA_MEM_TO_DEV) {
2867                        desc->rqcfg.src_inc = 1;
2868                        desc->rqcfg.dst_inc = 0;
2869                        fill_px(&desc->px, pch->fifo_dma, sg_dma_address(sg),
2870                                sg_dma_len(sg));
2871                } else {
2872                        desc->rqcfg.src_inc = 0;
2873                        desc->rqcfg.dst_inc = 1;
2874                        fill_px(&desc->px, sg_dma_address(sg), pch->fifo_dma,
2875                                sg_dma_len(sg));
2876                }
2877
2878                desc->rqcfg.brst_size = pch->burst_sz;
2879                desc->rqcfg.brst_len = pch->burst_len;
2880                desc->rqtype = direction;
2881                desc->bytes_requested = sg_dma_len(sg);
2882        }
2883
2884        /* Return the last desc in the chain */
2885        desc->txd.flags = flg;
2886        return &desc->txd;
2887}
2888
2889static irqreturn_t pl330_irq_handler(int irq, void *data)
2890{
2891        if (pl330_update(data))
2892                return IRQ_HANDLED;
2893        else
2894                return IRQ_NONE;
2895}
2896
2897#define PL330_DMA_BUSWIDTHS \
2898        BIT(DMA_SLAVE_BUSWIDTH_UNDEFINED) | \
2899        BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
2900        BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
2901        BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) | \
2902        BIT(DMA_SLAVE_BUSWIDTH_8_BYTES)
2903
2904#ifdef CONFIG_DEBUG_FS
2905static int pl330_debugfs_show(struct seq_file *s, void *data)
2906{
2907        struct pl330_dmac *pl330 = s->private;
2908        int chans, pchs, ch, pr;
2909
2910        chans = pl330->pcfg.num_chan;
2911        pchs = pl330->num_peripherals;
2912
2913        seq_puts(s, "PL330 physical channels:\n");
2914        seq_puts(s, "THREAD:\t\tCHANNEL:\n");
2915        seq_puts(s, "--------\t-----\n");
2916        for (ch = 0; ch < chans; ch++) {
2917                struct pl330_thread *thrd = &pl330->channels[ch];
2918                int found = -1;
2919
2920                for (pr = 0; pr < pchs; pr++) {
2921                        struct dma_pl330_chan *pch = &pl330->peripherals[pr];
2922
2923                        if (!pch->thread || thrd->id != pch->thread->id)
2924                                continue;
2925
2926                        found = pr;
2927                }
2928
2929                seq_printf(s, "%d\t\t", thrd->id);
2930                if (found == -1)
2931                        seq_puts(s, "--\n");
2932                else
2933                        seq_printf(s, "%d\n", found);
2934        }
2935
2936        return 0;
2937}
2938
2939DEFINE_SHOW_ATTRIBUTE(pl330_debugfs);
2940
2941static inline void init_pl330_debugfs(struct pl330_dmac *pl330)
2942{
2943        debugfs_create_file(dev_name(pl330->ddma.dev),
2944                            S_IFREG | 0444, NULL, pl330,
2945                            &pl330_debugfs_fops);
2946}
2947#else
2948static inline void init_pl330_debugfs(struct pl330_dmac *pl330)
2949{
2950}
2951#endif
2952
2953/*
2954 * Runtime PM callbacks are provided by amba/bus.c driver.
2955 *
2956 * It is assumed here that IRQ safe runtime PM is chosen in probe and amba
2957 * bus driver will only disable/enable the clock in runtime PM callbacks.
2958 */
2959static int __maybe_unused pl330_suspend(struct device *dev)
2960{
2961        struct amba_device *pcdev = to_amba_device(dev);
2962
2963        pm_runtime_disable(dev);
2964
2965        if (!pm_runtime_status_suspended(dev)) {
2966                /* amba did not disable the clock */
2967                amba_pclk_disable(pcdev);
2968        }
2969        amba_pclk_unprepare(pcdev);
2970
2971        return 0;
2972}
2973
2974static int __maybe_unused pl330_resume(struct device *dev)
2975{
2976        struct amba_device *pcdev = to_amba_device(dev);
2977        int ret;
2978
2979        ret = amba_pclk_prepare(pcdev);
2980        if (ret)
2981                return ret;
2982
2983        if (!pm_runtime_status_suspended(dev))
2984                ret = amba_pclk_enable(pcdev);
2985
2986        pm_runtime_enable(dev);
2987
2988        return ret;
2989}
2990
2991static SIMPLE_DEV_PM_OPS(pl330_pm, pl330_suspend, pl330_resume);
2992
2993static int
2994pl330_probe(struct amba_device *adev, const struct amba_id *id)
2995{
2996        struct pl330_config *pcfg;
2997        struct pl330_dmac *pl330;
2998        struct dma_pl330_chan *pch, *_p;
2999        struct dma_device *pd;
3000        struct resource *res;
3001        int i, ret, irq;
3002        int num_chan;
3003        struct device_node *np = adev->dev.of_node;
3004
3005        ret = dma_set_mask_and_coherent(&adev->dev, DMA_BIT_MASK(32));
3006        if (ret)
3007                return ret;
3008
3009        /* Allocate a new DMAC and its Channels */
3010        pl330 = devm_kzalloc(&adev->dev, sizeof(*pl330), GFP_KERNEL);
3011        if (!pl330)
3012                return -ENOMEM;
3013
3014        pd = &pl330->ddma;
3015        pd->dev = &adev->dev;
3016
3017        pl330->mcbufsz = 0;
3018
3019        /* get quirk */
3020        for (i = 0; i < ARRAY_SIZE(of_quirks); i++)
3021                if (of_property_read_bool(np, of_quirks[i].quirk))
3022                        pl330->quirks |= of_quirks[i].id;
3023
3024        res = &adev->res;
3025        pl330->base = devm_ioremap_resource(&adev->dev, res);
3026        if (IS_ERR(pl330->base))
3027                return PTR_ERR(pl330->base);
3028
3029        amba_set_drvdata(adev, pl330);
3030
3031        pl330->rstc = devm_reset_control_get_optional(&adev->dev, "dma");
3032        if (IS_ERR(pl330->rstc)) {
3033                if (PTR_ERR(pl330->rstc) != -EPROBE_DEFER)
3034                        dev_err(&adev->dev, "Failed to get reset!\n");
3035                return PTR_ERR(pl330->rstc);
3036        } else {
3037                ret = reset_control_deassert(pl330->rstc);
3038                if (ret) {
3039                        dev_err(&adev->dev, "Couldn't deassert the device from reset!\n");
3040                        return ret;
3041                }
3042        }
3043
3044        pl330->rstc_ocp = devm_reset_control_get_optional(&adev->dev, "dma-ocp");
3045        if (IS_ERR(pl330->rstc_ocp)) {
3046                if (PTR_ERR(pl330->rstc_ocp) != -EPROBE_DEFER)
3047                        dev_err(&adev->dev, "Failed to get OCP reset!\n");
3048                return PTR_ERR(pl330->rstc_ocp);
3049        } else {
3050                ret = reset_control_deassert(pl330->rstc_ocp);
3051                if (ret) {
3052                        dev_err(&adev->dev, "Couldn't deassert the device from OCP reset!\n");
3053                        return ret;
3054                }
3055        }
3056
3057        for (i = 0; i < AMBA_NR_IRQS; i++) {
3058                irq = adev->irq[i];
3059                if (irq) {
3060                        ret = devm_request_irq(&adev->dev, irq,
3061                                               pl330_irq_handler, 0,
3062                                               dev_name(&adev->dev), pl330);
3063                        if (ret)
3064                                return ret;
3065                } else {
3066                        break;
3067                }
3068        }
3069
3070        pcfg = &pl330->pcfg;
3071
3072        pcfg->periph_id = adev->periphid;
3073        ret = pl330_add(pl330);
3074        if (ret)
3075                return ret;
3076
3077        INIT_LIST_HEAD(&pl330->desc_pool);
3078        spin_lock_init(&pl330->pool_lock);
3079
3080        /* Create a descriptor pool of default size */
3081        if (!add_desc(&pl330->desc_pool, &pl330->pool_lock,
3082                      GFP_KERNEL, NR_DEFAULT_DESC))
3083                dev_warn(&adev->dev, "unable to allocate desc\n");
3084
3085        INIT_LIST_HEAD(&pd->channels);
3086
3087        /* Initialize channel parameters */
3088        num_chan = max_t(int, pcfg->num_peri, pcfg->num_chan);
3089
3090        pl330->num_peripherals = num_chan;
3091
3092        pl330->peripherals = kcalloc(num_chan, sizeof(*pch), GFP_KERNEL);
3093        if (!pl330->peripherals) {
3094                ret = -ENOMEM;
3095                goto probe_err2;
3096        }
3097
3098        for (i = 0; i < num_chan; i++) {
3099                pch = &pl330->peripherals[i];
3100
3101                pch->chan.private = adev->dev.of_node;
3102                INIT_LIST_HEAD(&pch->submitted_list);
3103                INIT_LIST_HEAD(&pch->work_list);
3104                INIT_LIST_HEAD(&pch->completed_list);
3105                spin_lock_init(&pch->lock);
3106                pch->thread = NULL;
3107                pch->chan.device = pd;
3108                pch->dmac = pl330;
3109                pch->dir = DMA_NONE;
3110
3111                /* Add the channel to the DMAC list */
3112                list_add_tail(&pch->chan.device_node, &pd->channels);
3113        }
3114
3115        dma_cap_set(DMA_MEMCPY, pd->cap_mask);
3116        if (pcfg->num_peri) {
3117                dma_cap_set(DMA_SLAVE, pd->cap_mask);
3118                dma_cap_set(DMA_CYCLIC, pd->cap_mask);
3119                dma_cap_set(DMA_PRIVATE, pd->cap_mask);
3120        }
3121
3122        pd->device_alloc_chan_resources = pl330_alloc_chan_resources;
3123        pd->device_free_chan_resources = pl330_free_chan_resources;
3124        pd->device_prep_dma_memcpy = pl330_prep_dma_memcpy;
3125        pd->device_prep_dma_cyclic = pl330_prep_dma_cyclic;
3126        pd->device_tx_status = pl330_tx_status;
3127        pd->device_prep_slave_sg = pl330_prep_slave_sg;
3128        pd->device_config = pl330_config;
3129        pd->device_pause = pl330_pause;
3130        pd->device_terminate_all = pl330_terminate_all;
3131        pd->device_issue_pending = pl330_issue_pending;
3132        pd->src_addr_widths = PL330_DMA_BUSWIDTHS;
3133        pd->dst_addr_widths = PL330_DMA_BUSWIDTHS;
3134        pd->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
3135        pd->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
3136        pd->max_burst = ((pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP) ?
3137                         1 : PL330_MAX_BURST);
3138
3139        ret = dma_async_device_register(pd);
3140        if (ret) {
3141                dev_err(&adev->dev, "unable to register DMAC\n");
3142                goto probe_err3;
3143        }
3144
3145        if (adev->dev.of_node) {
3146                ret = of_dma_controller_register(adev->dev.of_node,
3147                                         of_dma_pl330_xlate, pl330);
3148                if (ret) {
3149                        dev_err(&adev->dev,
3150                        "unable to register DMA to the generic DT DMA helpers\n");
3151                }
3152        }
3153
3154        adev->dev.dma_parms = &pl330->dma_parms;
3155
3156        /*
3157         * This is the limit for transfers with a buswidth of 1, larger
3158         * buswidths will have larger limits.
3159         */
3160        ret = dma_set_max_seg_size(&adev->dev, 1900800);
3161        if (ret)
3162                dev_err(&adev->dev, "unable to set the seg size\n");
3163
3164
3165        init_pl330_debugfs(pl330);
3166        dev_info(&adev->dev,
3167                "Loaded driver for PL330 DMAC-%x\n", adev->periphid);
3168        dev_info(&adev->dev,
3169                "\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n",
3170                pcfg->data_buf_dep, pcfg->data_bus_width / 8, pcfg->num_chan,
3171                pcfg->num_peri, pcfg->num_events);
3172
3173        pm_runtime_irq_safe(&adev->dev);
3174        pm_runtime_use_autosuspend(&adev->dev);
3175        pm_runtime_set_autosuspend_delay(&adev->dev, PL330_AUTOSUSPEND_DELAY);
3176        pm_runtime_mark_last_busy(&adev->dev);
3177        pm_runtime_put_autosuspend(&adev->dev);
3178
3179        return 0;
3180probe_err3:
3181        /* Idle the DMAC */
3182        list_for_each_entry_safe(pch, _p, &pl330->ddma.channels,
3183                        chan.device_node) {
3184
3185                /* Remove the channel */
3186                list_del(&pch->chan.device_node);
3187
3188                /* Flush the channel */
3189                if (pch->thread) {
3190                        pl330_terminate_all(&pch->chan);
3191                        pl330_free_chan_resources(&pch->chan);
3192                }
3193        }
3194probe_err2:
3195        pl330_del(pl330);
3196
3197        if (pl330->rstc_ocp)
3198                reset_control_assert(pl330->rstc_ocp);
3199
3200        if (pl330->rstc)
3201                reset_control_assert(pl330->rstc);
3202        return ret;
3203}
3204
3205static int pl330_remove(struct amba_device *adev)
3206{
3207        struct pl330_dmac *pl330 = amba_get_drvdata(adev);
3208        struct dma_pl330_chan *pch, *_p;
3209        int i, irq;
3210
3211        pm_runtime_get_noresume(pl330->ddma.dev);
3212
3213        if (adev->dev.of_node)
3214                of_dma_controller_free(adev->dev.of_node);
3215
3216        for (i = 0; i < AMBA_NR_IRQS; i++) {
3217                irq = adev->irq[i];
3218                if (irq)
3219                        devm_free_irq(&adev->dev, irq, pl330);
3220        }
3221
3222        dma_async_device_unregister(&pl330->ddma);
3223
3224        /* Idle the DMAC */
3225        list_for_each_entry_safe(pch, _p, &pl330->ddma.channels,
3226                        chan.device_node) {
3227
3228                /* Remove the channel */
3229                list_del(&pch->chan.device_node);
3230
3231                /* Flush the channel */
3232                if (pch->thread) {
3233                        pl330_terminate_all(&pch->chan);
3234                        pl330_free_chan_resources(&pch->chan);
3235                }
3236        }
3237
3238        pl330_del(pl330);
3239
3240        if (pl330->rstc_ocp)
3241                reset_control_assert(pl330->rstc_ocp);
3242
3243        if (pl330->rstc)
3244                reset_control_assert(pl330->rstc);
3245        return 0;
3246}
3247
3248static const struct amba_id pl330_ids[] = {
3249        {
3250                .id     = 0x00041330,
3251                .mask   = 0x000fffff,
3252        },
3253        { 0, 0 },
3254};
3255
3256MODULE_DEVICE_TABLE(amba, pl330_ids);
3257
3258static struct amba_driver pl330_driver = {
3259        .drv = {
3260                .owner = THIS_MODULE,
3261                .name = "dma-pl330",
3262                .pm = &pl330_pm,
3263        },
3264        .id_table = pl330_ids,
3265        .probe = pl330_probe,
3266        .remove = pl330_remove,
3267};
3268
3269module_amba_driver(pl330_driver);
3270
3271MODULE_AUTHOR("Jaswinder Singh <jassisinghbrar@gmail.com>");
3272MODULE_DESCRIPTION("API Driver for PL330 DMAC");
3273MODULE_LICENSE("GPL");
3274