// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * fam15h_power.c - AMD Family 15h processor power monitoring
 *
 * Copyright (c) 2011-2016 Advanced Micro Devices, Inc.
 * Author: Andreas Herrmann <herrmann.der.user@googlemail.com>
 */

#include <linux/err.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/bitops.h>
#include <linux/cpu.h>
#include <linux/cpumask.h>
#include <linux/time.h>
#include <linux/sched.h>
#include <asm/processor.h>
#include <asm/msr.h>

MODULE_DESCRIPTION("AMD Family 15h CPU processor power monitor");
MODULE_AUTHOR("Andreas Herrmann <herrmann.der.user@googlemail.com>");
MODULE_LICENSE("GPL");

/* D18F3 */
#define REG_NORTHBRIDGE_CAP             0xe8

/* D18F4 */
#define REG_PROCESSOR_TDP               0x1b8

/* D18F5 */
#define REG_TDP_RUNNING_AVERAGE         0xe0
#define REG_TDP_LIMIT3                  0xe8

#define FAM15H_MIN_NUM_ATTRS            2
#define FAM15H_NUM_GROUPS               2
#define MAX_CUS                         8

/* set maximum interval as 1 second */
#define MAX_INTERVAL                    1000

#define MSR_F15H_CU_PWR_ACCUMULATOR     0xc001007a
#define MSR_F15H_CU_MAX_PWR_ACCUMULATOR 0xc001007b
#define MSR_F15H_PTSC                   0xc0010280

#define PCI_DEVICE_ID_AMD_15H_M70H_NB_F4 0x15b4

struct fam15h_power_data {
        struct pci_dev *pdev;
        unsigned int tdp_to_watts;
        unsigned int base_tdp;
        unsigned int processor_pwr_watts;
        unsigned int cpu_pwr_sample_ratio;
        const struct attribute_group *groups[FAM15H_NUM_GROUPS];
        struct attribute_group group;
        /* maximum accumulated power of a compute unit */
        u64 max_cu_acc_power;
        /* accumulated power of the compute units */
        u64 cu_acc_power[MAX_CUS];
        /* performance timestamp counter */
        u64 cpu_sw_pwr_ptsc[MAX_CUS];
        /* online/offline status of current compute unit */
        int cu_on[MAX_CUS];
        unsigned long power_period;
};

static bool is_carrizo_or_later(void)
{
        return boot_cpu_data.x86 == 0x15 && boot_cpu_data.x86_model >= 0x60;
}

static ssize_t power1_input_show(struct device *dev,
                                 struct device_attribute *attr, char *buf)
{
        u32 val, tdp_limit, running_avg_range;
        s32 running_avg_capture;
        u64 curr_pwr_watts;
        struct fam15h_power_data *data = dev_get_drvdata(dev);
        struct pci_dev *f4 = data->pdev;

        pci_bus_read_config_dword(f4->bus, PCI_DEVFN(PCI_SLOT(f4->devfn), 5),
                                  REG_TDP_RUNNING_AVERAGE, &val);

        /*
         * On Carrizo and later platforms, TdpRunAvgAccCap bit field
         * is extended to 4:31 from 4:25.
         */
        if (is_carrizo_or_later()) {
                running_avg_capture = val >> 4;
                running_avg_capture = sign_extend32(running_avg_capture, 27);
        } else {
                running_avg_capture = (val >> 4) & 0x3fffff;
                running_avg_capture = sign_extend32(running_avg_capture, 21);
        }

        running_avg_range = (val & 0xf) + 1;

        pci_bus_read_config_dword(f4->bus, PCI_DEVFN(PCI_SLOT(f4->devfn), 5),
                                  REG_TDP_LIMIT3, &val);

        /*
         * On Carrizo and later platforms, ApmTdpLimit bit field
         * is extended to 16:31 from 16:28.
         */
        if (is_carrizo_or_later())
                tdp_limit = val >> 16;
        else
                tdp_limit = (val >> 16) & 0x1fff;

        curr_pwr_watts = ((u64)(tdp_limit +
                                data->base_tdp)) << running_avg_range;
        curr_pwr_watts -= running_avg_capture;
        curr_pwr_watts *= data->tdp_to_watts;

        /*
         * Convert to microWatt
         *
         * power is in Watt provided as fixed point integer with
         * scaling factor 1/(2^16).  For conversion we use
         * (10^6)/(2^16) = 15625/(2^10)
         */
        curr_pwr_watts = (curr_pwr_watts * 15625) >> (10 + running_avg_range);
        return sprintf(buf, "%u\n", (unsigned int) curr_pwr_watts);
}
static DEVICE_ATTR_RO(power1_input);

static ssize_t power1_crit_show(struct device *dev,
                                struct device_attribute *attr, char *buf)
{
        struct fam15h_power_data *data = dev_get_drvdata(dev);

        return sprintf(buf, "%u\n", data->processor_pwr_watts);
}
static DEVICE_ATTR_RO(power1_crit);

static void do_read_registers_on_cu(void *_data)
{
        struct fam15h_power_data *data = _data;
        int cpu, cu;

        cpu = smp_processor_id();

        /*
         * With the new x86 topology modelling, cpu core id actually
         * is compute unit id.
         */
        cu = cpu_data(cpu).cpu_core_id;

        rdmsrl_safe(MSR_F15H_CU_PWR_ACCUMULATOR, &data->cu_acc_power[cu]);
        rdmsrl_safe(MSR_F15H_PTSC, &data->cpu_sw_pwr_ptsc[cu]);

        data->cu_on[cu] = 1;
}

/*
 * This function is only able to be called when CPUID
 * Fn8000_0007:EDX[12] is set.
 */
static int read_registers(struct fam15h_power_data *data)
{
        int core, this_core;
        cpumask_var_t mask;
        int ret, cpu;

        ret = zalloc_cpumask_var(&mask, GFP_KERNEL);
        if (!ret)
                return -ENOMEM;

        memset(data->cu_on, 0, sizeof(int) * MAX_CUS);

        get_online_cpus();

        /*
         * Choose the first online core of each compute unit, and then
         * read their MSR value of power and ptsc in a single IPI,
         * because the MSR value of CPU core represent the compute
         * unit's.
         */
        core = -1;

        for_each_online_cpu(cpu) {
                this_core = topology_core_id(cpu);

                if (this_core == core)
                        continue;

                core = this_core;

                /* get any CPU on this compute unit */
                cpumask_set_cpu(cpumask_any(topology_sibling_cpumask(cpu)), mask);
        }

        on_each_cpu_mask(mask, do_read_registers_on_cu, data, true);

        put_online_cpus();
        free_cpumask_var(mask);

        return 0;
}

static ssize_t power1_average_show(struct device *dev,
                                   struct device_attribute *attr, char *buf)
{
        struct fam15h_power_data *data = dev_get_drvdata(dev);
        u64 prev_cu_acc_power[MAX_CUS], prev_ptsc[MAX_CUS],
            jdelta[MAX_CUS];
        u64 tdelta, avg_acc;
        int cu, cu_num, ret;
        signed long leftover;

        /*
         * With the new x86 topology modelling, x86_max_cores is the
         * compute unit number.
         */
        cu_num = boot_cpu_data.x86_max_cores;

        ret = read_registers(data);
        if (ret)
                return 0;

        for (cu = 0; cu < cu_num; cu++) {
                prev_cu_acc_power[cu] = data->cu_acc_power[cu];
                prev_ptsc[cu] = data->cpu_sw_pwr_ptsc[cu];
        }

        leftover = schedule_timeout_interruptible(msecs_to_jiffies(data->power_period));
        if (leftover)
                return 0;

        ret = read_registers(data);
        if (ret)
                return 0;

        for (cu = 0, avg_acc = 0; cu < cu_num; cu++) {
                /* check if current compute unit is online */
                if (data->cu_on[cu] == 0)
                        continue;

                if (data->cu_acc_power[cu] < prev_cu_acc_power[cu]) {
                        jdelta[cu] = data->max_cu_acc_power + data->cu_acc_power[cu];
                        jdelta[cu] -= prev_cu_acc_power[cu];
                } else {
                        jdelta[cu] = data->cu_acc_power[cu] - prev_cu_acc_power[cu];
                }
                tdelta = data->cpu_sw_pwr_ptsc[cu] - prev_ptsc[cu];
                jdelta[cu] *= data->cpu_pwr_sample_ratio * 1000;
                do_div(jdelta[cu], tdelta);

                /* the unit is microWatt */
                avg_acc += jdelta[cu];
        }

        return sprintf(buf, "%llu\n", (unsigned long long)avg_acc);
}
static DEVICE_ATTR_RO(power1_average);

static ssize_t power1_average_interval_show(struct device *dev,
                                            struct device_attribute *attr,
                                            char *buf)
{
        struct fam15h_power_data *data = dev_get_drvdata(dev);

        return sprintf(buf, "%lu\n", data->power_period);
}

static ssize_t power1_average_interval_store(struct device *dev,
                                             struct device_attribute *attr,
                                             const char *buf, size_t count)
{
        struct fam15h_power_data *data = dev_get_drvdata(dev);
        unsigned long temp;
        int ret;

        ret = kstrtoul(buf, 10, &temp);
        if (ret)
                return ret;

        if (temp > MAX_INTERVAL)
                return -EINVAL;

        /* the interval value should be greater than 0 */
        if (temp <= 0)
                return -EINVAL;

        data->power_period = temp;

        return count;
}
static DEVICE_ATTR_RW(power1_average_interval);

static int fam15h_power_init_attrs(struct pci_dev *pdev,
                                   struct fam15h_power_data *data)
{
        int n = FAM15H_MIN_NUM_ATTRS;
        struct attribute **fam15h_power_attrs;
        struct cpuinfo_x86 *c = &boot_cpu_data;

        if (c->x86 == 0x15 &&
            (c->x86_model <= 0xf ||
             (c->x86_model >= 0x60 && c->x86_model <= 0x7f)))
                n += 1;

        /* check if processor supports accumulated power */
        if (boot_cpu_has(X86_FEATURE_ACC_POWER))
                n += 2;

        fam15h_power_attrs = devm_kcalloc(&pdev->dev, n,
                                          sizeof(*fam15h_power_attrs),
                                          GFP_KERNEL);

        if (!fam15h_power_attrs)
                return -ENOMEM;

        n = 0;
        fam15h_power_attrs[n++] = &dev_attr_power1_crit.attr;
        if (c->x86 == 0x15 &&
            (c->x86_model <= 0xf ||
             (c->x86_model >= 0x60 && c->x86_model <= 0x7f)))
                fam15h_power_attrs[n++] = &dev_attr_power1_input.attr;

        if (boot_cpu_has(X86_FEATURE_ACC_POWER)) {
                fam15h_power_attrs[n++] = &dev_attr_power1_average.attr;
                fam15h_power_attrs[n++] = &dev_attr_power1_average_interval.attr;
        }

        data->group.attrs = fam15h_power_attrs;

        return 0;
}

static bool should_load_on_this_node(struct pci_dev *f4)
{
        u32 val;

        pci_bus_read_config_dword(f4->bus, PCI_DEVFN(PCI_SLOT(f4->devfn), 3),
                                  REG_NORTHBRIDGE_CAP, &val);
        if ((val & BIT(29)) && ((val >> 30) & 3))
                return false;

        return true;
}

/*
 * Newer BKDG versions have an updated recommendation on how to properly
 * initialize the running average range (was: 0xE, now: 0x9). This avoids
 * counter saturations resulting in bogus power readings.
 * We correct this value ourselves to cope with older BIOSes.
 */
static const struct pci_device_id affected_device[] = {
        { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) },
        { 0 }
};

static void tweak_runavg_range(struct pci_dev *pdev)
{
        u32 val;

        /*
         * let this quirk apply only to the current version of the
         * northbridge, since future versions may change the behavior
         */
        if (!pci_match_id(affected_device, pdev))
                return;

        pci_bus_read_config_dword(pdev->bus,
                PCI_DEVFN(PCI_SLOT(pdev->devfn), 5),
                REG_TDP_RUNNING_AVERAGE, &val);
        if ((val & 0xf) != 0xe)
                return;

        val &= ~0xf;
        val |=  0x9;
        pci_bus_write_config_dword(pdev->bus,
                PCI_DEVFN(PCI_SLOT(pdev->devfn), 5),
                REG_TDP_RUNNING_AVERAGE, val);
}

#ifdef CONFIG_PM
static int fam15h_power_resume(struct pci_dev *pdev)
{
        tweak_runavg_range(pdev);
        return 0;
}
#else
#define fam15h_power_resume NULL
#endif

static int fam15h_power_init_data(struct pci_dev *f4,
                                  struct fam15h_power_data *data)
{
        u32 val;
        u64 tmp;
        int ret;

        pci_read_config_dword(f4, REG_PROCESSOR_TDP, &val);
        data->base_tdp = val >> 16;
        tmp = val & 0xffff;

        pci_bus_read_config_dword(f4->bus, PCI_DEVFN(PCI_SLOT(f4->devfn), 5),
                                  REG_TDP_LIMIT3, &val);

        data->tdp_to_watts = ((val & 0x3ff) << 6) | ((val >> 10) & 0x3f);
        tmp *= data->tdp_to_watts;

        /* result not allowed to be >= 256W */
        if ((tmp >> 16) >= 256)
                dev_warn(&f4->dev,
                         "Bogus value for ProcessorPwrWatts (processor_pwr_watts>=%u)\n",
                         (unsigned int) (tmp >> 16));

        /* convert to microWatt */
        data->processor_pwr_watts = (tmp * 15625) >> 10;

        ret = fam15h_power_init_attrs(f4, data);
        if (ret)
                return ret;


        /* CPUID Fn8000_0007:EDX[12] indicates to support accumulated power */
        if (!boot_cpu_has(X86_FEATURE_ACC_POWER))
                return 0;

        /*
         * determine the ratio of the compute unit power accumulator
         * sample period to the PTSC counter period by executing CPUID
         * Fn8000_0007:ECX
         */
        data->cpu_pwr_sample_ratio = cpuid_ecx(0x80000007);

        if (rdmsrl_safe(MSR_F15H_CU_MAX_PWR_ACCUMULATOR, &tmp)) {
                pr_err("Failed to read max compute unit power accumulator MSR\n");
                return -ENODEV;
        }

        data->max_cu_acc_power = tmp;

        /*
         * Milliseconds are a reasonable interval for the measurement.
         * But it shouldn't set too long here, because several seconds
         * would cause the read function to hang. So set default
         * interval as 10 ms.
         */
        data->power_period = 10;

        return read_registers(data);
}

static int fam15h_power_probe(struct pci_dev *pdev,
                              const struct pci_device_id *id)
{
        struct fam15h_power_data *data;
        struct device *dev = &pdev->dev;
        struct device *hwmon_dev;
        int ret;

        /*
         * though we ignore every other northbridge, we still have to
         * do the tweaking on _each_ node in MCM processors as the counters
         * are working hand-in-hand
         */
        tweak_runavg_range(pdev);

        if (!should_load_on_this_node(pdev))
                return -ENODEV;

        data = devm_kzalloc(dev, sizeof(struct fam15h_power_data), GFP_KERNEL);
        if (!data)
                return -ENOMEM;

        ret = fam15h_power_init_data(pdev, data);
        if (ret)
                return ret;

        data->pdev = pdev;

        data->groups[0] = &data->group;

        hwmon_dev = devm_hwmon_device_register_with_groups(dev, "fam15h_power",
                                                           data,
                                                           &data->groups[0]);
        return PTR_ERR_OR_ZERO(hwmon_dev);
}

static const struct pci_device_id fam15h_power_id_table[] = {
        { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) },
        { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M30H_NB_F4) },
        { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M60H_NB_F4) },
        { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M70H_NB_F4) },
        { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_NB_F4) },
        { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F4) },
        {}
};
MODULE_DEVICE_TABLE(pci, fam15h_power_id_table);

static struct pci_driver fam15h_power_driver = {
        .name = "fam15h_power",
        .id_table = fam15h_power_id_table,
        .probe = fam15h_power_probe,
        .resume = fam15h_power_resume,
};

module_pci_driver(fam15h_power_driver);