1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22#include <linux/module.h>
23#include <linux/init.h>
24#include <linux/slab.h>
25#include <linux/jiffies.h>
26#include <linux/i2c.h>
27#include <linux/hwmon.h>
28#include <linux/hwmon-sysfs.h>
29#include <linux/err.h>
30#include <linux/mutex.h>
31#include <linux/sysfs.h>
32
33
34static const unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
35
36enum chips { gl518sm_r00, gl518sm_r80 };
37
38
39
40
41#define GL518_REG_CHIP_ID 0x00
42#define GL518_REG_REVISION 0x01
43#define GL518_REG_VENDOR_ID 0x02
44#define GL518_REG_CONF 0x03
45#define GL518_REG_TEMP_IN 0x04
46#define GL518_REG_TEMP_MAX 0x05
47#define GL518_REG_TEMP_HYST 0x06
48#define GL518_REG_FAN_COUNT 0x07
49#define GL518_REG_FAN_LIMIT 0x08
50#define GL518_REG_VIN1_LIMIT 0x09
51#define GL518_REG_VIN2_LIMIT 0x0a
52#define GL518_REG_VIN3_LIMIT 0x0b
53#define GL518_REG_VDD_LIMIT 0x0c
54#define GL518_REG_VIN3 0x0d
55#define GL518_REG_MISC 0x0f
56#define GL518_REG_ALARM 0x10
57#define GL518_REG_MASK 0x11
58#define GL518_REG_INT 0x12
59#define GL518_REG_VIN2 0x13
60#define GL518_REG_VIN1 0x14
61#define GL518_REG_VDD 0x15
62
63
64
65
66
67
68
69
70
71#define RAW_FROM_REG(val) val
72
73#define BOOL_FROM_REG(val) ((val) ? 0 : 1)
74#define BOOL_TO_REG(val) ((val) ? 0 : 1)
75
76#define TEMP_CLAMP(val) clamp_val(val, -119000, 136000)
77#define TEMP_TO_REG(val) (DIV_ROUND_CLOSEST(TEMP_CLAMP(val), 1000) + 119)
78#define TEMP_FROM_REG(val) (((val) - 119) * 1000)
79
80static inline u8 FAN_TO_REG(long rpm, int div)
81{
82 long rpmdiv;
83 if (rpm == 0)
84 return 0;
85 rpmdiv = clamp_val(rpm, 1, 960000) * div;
86 return clamp_val((480000 + rpmdiv / 2) / rpmdiv, 1, 255);
87}
88#define FAN_FROM_REG(val, div) ((val) == 0 ? 0 : (480000 / ((val) * (div))))
89
90#define IN_CLAMP(val) clamp_val(val, 0, 255 * 19)
91#define IN_TO_REG(val) DIV_ROUND_CLOSEST(IN_CLAMP(val), 19)
92#define IN_FROM_REG(val) ((val) * 19)
93
94#define VDD_CLAMP(val) clamp_val(val, 0, 255 * 95 / 4)
95#define VDD_TO_REG(val) DIV_ROUND_CLOSEST(VDD_CLAMP(val) * 4, 95)
96#define VDD_FROM_REG(val) DIV_ROUND_CLOSEST((val) * 95, 4)
97
98#define DIV_FROM_REG(val) (1 << (val))
99
100#define BEEP_MASK_TO_REG(val) ((val) & 0x7f & data->alarm_mask)
101#define BEEP_MASK_FROM_REG(val) ((val) & 0x7f)
102
103
104struct gl518_data {
105 struct i2c_client *client;
106 const struct attribute_group *groups[3];
107 enum chips type;
108
109 struct mutex update_lock;
110 char valid;
111 unsigned long last_updated;
112
113 u8 voltage_in[4];
114 u8 voltage_min[4];
115 u8 voltage_max[4];
116 u8 fan_in[2];
117 u8 fan_min[2];
118 u8 fan_div[2];
119 u8 fan_auto1;
120 u8 temp_in;
121 u8 temp_max;
122 u8 temp_hyst;
123 u8 alarms;
124 u8 alarm_mask;
125 u8 beep_mask;
126 u8 beep_enable;
127};
128
129
130
131
132
133
134static int gl518_read_value(struct i2c_client *client, u8 reg)
135{
136 if ((reg >= 0x07) && (reg <= 0x0c))
137 return i2c_smbus_read_word_swapped(client, reg);
138 else
139 return i2c_smbus_read_byte_data(client, reg);
140}
141
142static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value)
143{
144 if ((reg >= 0x07) && (reg <= 0x0c))
145 return i2c_smbus_write_word_swapped(client, reg, value);
146 else
147 return i2c_smbus_write_byte_data(client, reg, value);
148}
149
150static struct gl518_data *gl518_update_device(struct device *dev)
151{
152 struct gl518_data *data = dev_get_drvdata(dev);
153 struct i2c_client *client = data->client;
154 int val;
155
156 mutex_lock(&data->update_lock);
157
158 if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
159 || !data->valid) {
160 dev_dbg(&client->dev, "Starting gl518 update\n");
161
162 data->alarms = gl518_read_value(client, GL518_REG_INT);
163 data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
164
165 val = gl518_read_value(client, GL518_REG_VDD_LIMIT);
166 data->voltage_min[0] = val & 0xff;
167 data->voltage_max[0] = (val >> 8) & 0xff;
168 val = gl518_read_value(client, GL518_REG_VIN1_LIMIT);
169 data->voltage_min[1] = val & 0xff;
170 data->voltage_max[1] = (val >> 8) & 0xff;
171 val = gl518_read_value(client, GL518_REG_VIN2_LIMIT);
172 data->voltage_min[2] = val & 0xff;
173 data->voltage_max[2] = (val >> 8) & 0xff;
174 val = gl518_read_value(client, GL518_REG_VIN3_LIMIT);
175 data->voltage_min[3] = val & 0xff;
176 data->voltage_max[3] = (val >> 8) & 0xff;
177
178 val = gl518_read_value(client, GL518_REG_FAN_COUNT);
179 data->fan_in[0] = (val >> 8) & 0xff;
180 data->fan_in[1] = val & 0xff;
181
182 val = gl518_read_value(client, GL518_REG_FAN_LIMIT);
183 data->fan_min[0] = (val >> 8) & 0xff;
184 data->fan_min[1] = val & 0xff;
185
186 data->temp_in = gl518_read_value(client, GL518_REG_TEMP_IN);
187 data->temp_max =
188 gl518_read_value(client, GL518_REG_TEMP_MAX);
189 data->temp_hyst =
190 gl518_read_value(client, GL518_REG_TEMP_HYST);
191
192 val = gl518_read_value(client, GL518_REG_MISC);
193 data->fan_div[0] = (val >> 6) & 0x03;
194 data->fan_div[1] = (val >> 4) & 0x03;
195 data->fan_auto1 = (val >> 3) & 0x01;
196
197 data->alarms &= data->alarm_mask;
198
199 val = gl518_read_value(client, GL518_REG_CONF);
200 data->beep_enable = (val >> 2) & 1;
201
202 if (data->type != gl518sm_r00) {
203 data->voltage_in[0] =
204 gl518_read_value(client, GL518_REG_VDD);
205 data->voltage_in[1] =
206 gl518_read_value(client, GL518_REG_VIN1);
207 data->voltage_in[2] =
208 gl518_read_value(client, GL518_REG_VIN2);
209 }
210 data->voltage_in[3] =
211 gl518_read_value(client, GL518_REG_VIN3);
212
213 data->last_updated = jiffies;
214 data->valid = 1;
215 }
216
217 mutex_unlock(&data->update_lock);
218
219 return data;
220}
221
222
223
224
225
226#define show(type, suffix, value) \
227static ssize_t show_##suffix(struct device *dev, \
228 struct device_attribute *attr, char *buf) \
229{ \
230 struct gl518_data *data = gl518_update_device(dev); \
231 return sprintf(buf, "%d\n", type##_FROM_REG(data->value)); \
232}
233
234show(TEMP, temp_input1, temp_in);
235show(TEMP, temp_max1, temp_max);
236show(TEMP, temp_hyst1, temp_hyst);
237show(BOOL, fan_auto1, fan_auto1);
238show(VDD, in_input0, voltage_in[0]);
239show(IN, in_input1, voltage_in[1]);
240show(IN, in_input2, voltage_in[2]);
241show(IN, in_input3, voltage_in[3]);
242show(VDD, in_min0, voltage_min[0]);
243show(IN, in_min1, voltage_min[1]);
244show(IN, in_min2, voltage_min[2]);
245show(IN, in_min3, voltage_min[3]);
246show(VDD, in_max0, voltage_max[0]);
247show(IN, in_max1, voltage_max[1]);
248show(IN, in_max2, voltage_max[2]);
249show(IN, in_max3, voltage_max[3]);
250show(RAW, alarms, alarms);
251show(BOOL, beep_enable, beep_enable);
252show(BEEP_MASK, beep_mask, beep_mask);
253
254static ssize_t fan_input_show(struct device *dev,
255 struct device_attribute *attr, char *buf)
256{
257 int nr = to_sensor_dev_attr(attr)->index;
258 struct gl518_data *data = gl518_update_device(dev);
259 return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_in[nr],
260 DIV_FROM_REG(data->fan_div[nr])));
261}
262
263static ssize_t fan_min_show(struct device *dev, struct device_attribute *attr,
264 char *buf)
265{
266 int nr = to_sensor_dev_attr(attr)->index;
267 struct gl518_data *data = gl518_update_device(dev);
268 return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr],
269 DIV_FROM_REG(data->fan_div[nr])));
270}
271
272static ssize_t fan_div_show(struct device *dev, struct device_attribute *attr,
273 char *buf)
274{
275 int nr = to_sensor_dev_attr(attr)->index;
276 struct gl518_data *data = gl518_update_device(dev);
277 return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
278}
279
280#define set(type, suffix, value, reg) \
281static ssize_t set_##suffix(struct device *dev, \
282 struct device_attribute *attr, \
283 const char *buf, size_t count) \
284{ \
285 struct gl518_data *data = dev_get_drvdata(dev); \
286 struct i2c_client *client = data->client; \
287 long val; \
288 int err = kstrtol(buf, 10, &val); \
289 if (err) \
290 return err; \
291 \
292 mutex_lock(&data->update_lock); \
293 data->value = type##_TO_REG(val); \
294 gl518_write_value(client, reg, data->value); \
295 mutex_unlock(&data->update_lock); \
296 return count; \
297}
298
299#define set_bits(type, suffix, value, reg, mask, shift) \
300static ssize_t set_##suffix(struct device *dev, \
301 struct device_attribute *attr, \
302 const char *buf, size_t count) \
303{ \
304 struct gl518_data *data = dev_get_drvdata(dev); \
305 struct i2c_client *client = data->client; \
306 int regvalue; \
307 unsigned long val; \
308 int err = kstrtoul(buf, 10, &val); \
309 if (err) \
310 return err; \
311 \
312 mutex_lock(&data->update_lock); \
313 regvalue = gl518_read_value(client, reg); \
314 data->value = type##_TO_REG(val); \
315 regvalue = (regvalue & ~mask) | (data->value << shift); \
316 gl518_write_value(client, reg, regvalue); \
317 mutex_unlock(&data->update_lock); \
318 return count; \
319}
320
321#define set_low(type, suffix, value, reg) \
322 set_bits(type, suffix, value, reg, 0x00ff, 0)
323#define set_high(type, suffix, value, reg) \
324 set_bits(type, suffix, value, reg, 0xff00, 8)
325
326set(TEMP, temp_max1, temp_max, GL518_REG_TEMP_MAX);
327set(TEMP, temp_hyst1, temp_hyst, GL518_REG_TEMP_HYST);
328set_bits(BOOL, fan_auto1, fan_auto1, GL518_REG_MISC, 0x08, 3);
329set_low(VDD, in_min0, voltage_min[0], GL518_REG_VDD_LIMIT);
330set_low(IN, in_min1, voltage_min[1], GL518_REG_VIN1_LIMIT);
331set_low(IN, in_min2, voltage_min[2], GL518_REG_VIN2_LIMIT);
332set_low(IN, in_min3, voltage_min[3], GL518_REG_VIN3_LIMIT);
333set_high(VDD, in_max0, voltage_max[0], GL518_REG_VDD_LIMIT);
334set_high(IN, in_max1, voltage_max[1], GL518_REG_VIN1_LIMIT);
335set_high(IN, in_max2, voltage_max[2], GL518_REG_VIN2_LIMIT);
336set_high(IN, in_max3, voltage_max[3], GL518_REG_VIN3_LIMIT);
337set_bits(BOOL, beep_enable, beep_enable, GL518_REG_CONF, 0x04, 2);
338set(BEEP_MASK, beep_mask, beep_mask, GL518_REG_ALARM);
339
340static ssize_t fan_min_store(struct device *dev,
341 struct device_attribute *attr, const char *buf,
342 size_t count)
343{
344 struct gl518_data *data = dev_get_drvdata(dev);
345 struct i2c_client *client = data->client;
346 int nr = to_sensor_dev_attr(attr)->index;
347 int regvalue;
348 unsigned long val;
349 int err;
350
351 err = kstrtoul(buf, 10, &val);
352 if (err)
353 return err;
354
355 mutex_lock(&data->update_lock);
356 regvalue = gl518_read_value(client, GL518_REG_FAN_LIMIT);
357 data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
358 regvalue = (regvalue & (0xff << (8 * nr)))
359 | (data->fan_min[nr] << (8 * (1 - nr)));
360 gl518_write_value(client, GL518_REG_FAN_LIMIT, regvalue);
361
362 data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
363 if (data->fan_min[nr] == 0)
364 data->alarm_mask &= ~(0x20 << nr);
365 else
366 data->alarm_mask |= (0x20 << nr);
367 data->beep_mask &= data->alarm_mask;
368 gl518_write_value(client, GL518_REG_ALARM, data->beep_mask);
369
370 mutex_unlock(&data->update_lock);
371 return count;
372}
373
374static ssize_t fan_div_store(struct device *dev,
375 struct device_attribute *attr, const char *buf,
376 size_t count)
377{
378 struct gl518_data *data = dev_get_drvdata(dev);
379 struct i2c_client *client = data->client;
380 int nr = to_sensor_dev_attr(attr)->index;
381 int regvalue;
382 unsigned long val;
383 int err;
384
385 err = kstrtoul(buf, 10, &val);
386 if (err)
387 return err;
388
389 switch (val) {
390 case 1:
391 val = 0;
392 break;
393 case 2:
394 val = 1;
395 break;
396 case 4:
397 val = 2;
398 break;
399 case 8:
400 val = 3;
401 break;
402 default:
403 dev_err(dev,
404 "Invalid fan clock divider %lu, choose one of 1, 2, 4 or 8\n",
405 val);
406 return -EINVAL;
407 }
408
409 mutex_lock(&data->update_lock);
410 regvalue = gl518_read_value(client, GL518_REG_MISC);
411 data->fan_div[nr] = val;
412 regvalue = (regvalue & ~(0xc0 >> (2 * nr)))
413 | (data->fan_div[nr] << (6 - 2 * nr));
414 gl518_write_value(client, GL518_REG_MISC, regvalue);
415 mutex_unlock(&data->update_lock);
416 return count;
417}
418
419static DEVICE_ATTR(temp1_input, 0444, show_temp_input1, NULL);
420static DEVICE_ATTR(temp1_max, 0644, show_temp_max1, set_temp_max1);
421static DEVICE_ATTR(temp1_max_hyst, 0644,
422 show_temp_hyst1, set_temp_hyst1);
423static DEVICE_ATTR(fan1_auto, 0644, show_fan_auto1, set_fan_auto1);
424static SENSOR_DEVICE_ATTR_RO(fan1_input, fan_input, 0);
425static SENSOR_DEVICE_ATTR_RO(fan2_input, fan_input, 1);
426static SENSOR_DEVICE_ATTR_RW(fan1_min, fan_min, 0);
427static SENSOR_DEVICE_ATTR_RW(fan2_min, fan_min, 1);
428static SENSOR_DEVICE_ATTR_RW(fan1_div, fan_div, 0);
429static SENSOR_DEVICE_ATTR_RW(fan2_div, fan_div, 1);
430static DEVICE_ATTR(in0_input, 0444, show_in_input0, NULL);
431static DEVICE_ATTR(in1_input, 0444, show_in_input1, NULL);
432static DEVICE_ATTR(in2_input, 0444, show_in_input2, NULL);
433static DEVICE_ATTR(in3_input, 0444, show_in_input3, NULL);
434static DEVICE_ATTR(in0_min, 0644, show_in_min0, set_in_min0);
435static DEVICE_ATTR(in1_min, 0644, show_in_min1, set_in_min1);
436static DEVICE_ATTR(in2_min, 0644, show_in_min2, set_in_min2);
437static DEVICE_ATTR(in3_min, 0644, show_in_min3, set_in_min3);
438static DEVICE_ATTR(in0_max, 0644, show_in_max0, set_in_max0);
439static DEVICE_ATTR(in1_max, 0644, show_in_max1, set_in_max1);
440static DEVICE_ATTR(in2_max, 0644, show_in_max2, set_in_max2);
441static DEVICE_ATTR(in3_max, 0644, show_in_max3, set_in_max3);
442static DEVICE_ATTR(alarms, 0444, show_alarms, NULL);
443static DEVICE_ATTR(beep_enable, 0644,
444 show_beep_enable, set_beep_enable);
445static DEVICE_ATTR(beep_mask, 0644,
446 show_beep_mask, set_beep_mask);
447
448static ssize_t alarm_show(struct device *dev, struct device_attribute *attr,
449 char *buf)
450{
451 int bitnr = to_sensor_dev_attr(attr)->index;
452 struct gl518_data *data = gl518_update_device(dev);
453 return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
454}
455
456static SENSOR_DEVICE_ATTR_RO(in0_alarm, alarm, 0);
457static SENSOR_DEVICE_ATTR_RO(in1_alarm, alarm, 1);
458static SENSOR_DEVICE_ATTR_RO(in2_alarm, alarm, 2);
459static SENSOR_DEVICE_ATTR_RO(in3_alarm, alarm, 3);
460static SENSOR_DEVICE_ATTR_RO(temp1_alarm, alarm, 4);
461static SENSOR_DEVICE_ATTR_RO(fan1_alarm, alarm, 5);
462static SENSOR_DEVICE_ATTR_RO(fan2_alarm, alarm, 6);
463
464static ssize_t beep_show(struct device *dev, struct device_attribute *attr,
465 char *buf)
466{
467 int bitnr = to_sensor_dev_attr(attr)->index;
468 struct gl518_data *data = gl518_update_device(dev);
469 return sprintf(buf, "%u\n", (data->beep_mask >> bitnr) & 1);
470}
471
472static ssize_t beep_store(struct device *dev, struct device_attribute *attr,
473 const char *buf, size_t count)
474{
475 struct gl518_data *data = dev_get_drvdata(dev);
476 struct i2c_client *client = data->client;
477 int bitnr = to_sensor_dev_attr(attr)->index;
478 unsigned long bit;
479 int err;
480
481 err = kstrtoul(buf, 10, &bit);
482 if (err)
483 return err;
484
485 if (bit & ~1)
486 return -EINVAL;
487
488 mutex_lock(&data->update_lock);
489 data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
490 if (bit)
491 data->beep_mask |= (1 << bitnr);
492 else
493 data->beep_mask &= ~(1 << bitnr);
494 gl518_write_value(client, GL518_REG_ALARM, data->beep_mask);
495 mutex_unlock(&data->update_lock);
496 return count;
497}
498
499static SENSOR_DEVICE_ATTR_RW(in0_beep, beep, 0);
500static SENSOR_DEVICE_ATTR_RW(in1_beep, beep, 1);
501static SENSOR_DEVICE_ATTR_RW(in2_beep, beep, 2);
502static SENSOR_DEVICE_ATTR_RW(in3_beep, beep, 3);
503static SENSOR_DEVICE_ATTR_RW(temp1_beep, beep, 4);
504static SENSOR_DEVICE_ATTR_RW(fan1_beep, beep, 5);
505static SENSOR_DEVICE_ATTR_RW(fan2_beep, beep, 6);
506
507static struct attribute *gl518_attributes[] = {
508 &dev_attr_in3_input.attr,
509 &dev_attr_in0_min.attr,
510 &dev_attr_in1_min.attr,
511 &dev_attr_in2_min.attr,
512 &dev_attr_in3_min.attr,
513 &dev_attr_in0_max.attr,
514 &dev_attr_in1_max.attr,
515 &dev_attr_in2_max.attr,
516 &dev_attr_in3_max.attr,
517 &sensor_dev_attr_in0_alarm.dev_attr.attr,
518 &sensor_dev_attr_in1_alarm.dev_attr.attr,
519 &sensor_dev_attr_in2_alarm.dev_attr.attr,
520 &sensor_dev_attr_in3_alarm.dev_attr.attr,
521 &sensor_dev_attr_in0_beep.dev_attr.attr,
522 &sensor_dev_attr_in1_beep.dev_attr.attr,
523 &sensor_dev_attr_in2_beep.dev_attr.attr,
524 &sensor_dev_attr_in3_beep.dev_attr.attr,
525
526 &dev_attr_fan1_auto.attr,
527 &sensor_dev_attr_fan1_input.dev_attr.attr,
528 &sensor_dev_attr_fan2_input.dev_attr.attr,
529 &sensor_dev_attr_fan1_min.dev_attr.attr,
530 &sensor_dev_attr_fan2_min.dev_attr.attr,
531 &sensor_dev_attr_fan1_div.dev_attr.attr,
532 &sensor_dev_attr_fan2_div.dev_attr.attr,
533 &sensor_dev_attr_fan1_alarm.dev_attr.attr,
534 &sensor_dev_attr_fan2_alarm.dev_attr.attr,
535 &sensor_dev_attr_fan1_beep.dev_attr.attr,
536 &sensor_dev_attr_fan2_beep.dev_attr.attr,
537
538 &dev_attr_temp1_input.attr,
539 &dev_attr_temp1_max.attr,
540 &dev_attr_temp1_max_hyst.attr,
541 &sensor_dev_attr_temp1_alarm.dev_attr.attr,
542 &sensor_dev_attr_temp1_beep.dev_attr.attr,
543
544 &dev_attr_alarms.attr,
545 &dev_attr_beep_enable.attr,
546 &dev_attr_beep_mask.attr,
547 NULL
548};
549
550static const struct attribute_group gl518_group = {
551 .attrs = gl518_attributes,
552};
553
554static struct attribute *gl518_attributes_r80[] = {
555 &dev_attr_in0_input.attr,
556 &dev_attr_in1_input.attr,
557 &dev_attr_in2_input.attr,
558 NULL
559};
560
561static const struct attribute_group gl518_group_r80 = {
562 .attrs = gl518_attributes_r80,
563};
564
565
566
567
568
569
570static int gl518_detect(struct i2c_client *client, struct i2c_board_info *info)
571{
572 struct i2c_adapter *adapter = client->adapter;
573 int rev;
574
575 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
576 I2C_FUNC_SMBUS_WORD_DATA))
577 return -ENODEV;
578
579
580 if ((gl518_read_value(client, GL518_REG_CHIP_ID) != 0x80)
581 || (gl518_read_value(client, GL518_REG_CONF) & 0x80))
582 return -ENODEV;
583
584
585 rev = gl518_read_value(client, GL518_REG_REVISION);
586 if (rev != 0x00 && rev != 0x80)
587 return -ENODEV;
588
589 strlcpy(info->type, "gl518sm", I2C_NAME_SIZE);
590
591 return 0;
592}
593
594
595
596
597
598static void gl518_init_client(struct i2c_client *client)
599{
600
601 u8 regvalue = gl518_read_value(client, GL518_REG_CONF) & 0x7f;
602
603
604 gl518_write_value(client, GL518_REG_CONF, (regvalue &= 0x37));
605
606
607 gl518_write_value(client, GL518_REG_MASK, 0x00);
608
609
610 gl518_write_value(client, GL518_REG_CONF, 0x20 | regvalue);
611 gl518_write_value(client, GL518_REG_CONF, 0x40 | regvalue);
612}
613
614static int gl518_probe(struct i2c_client *client,
615 const struct i2c_device_id *id)
616{
617 struct device *dev = &client->dev;
618 struct device *hwmon_dev;
619 struct gl518_data *data;
620 int revision;
621
622 data = devm_kzalloc(dev, sizeof(struct gl518_data), GFP_KERNEL);
623 if (!data)
624 return -ENOMEM;
625
626 data->client = client;
627 revision = gl518_read_value(client, GL518_REG_REVISION);
628 data->type = revision == 0x80 ? gl518sm_r80 : gl518sm_r00;
629 mutex_init(&data->update_lock);
630
631
632 data->alarm_mask = 0xff;
633 gl518_init_client(client);
634
635
636 data->groups[0] = &gl518_group;
637 if (data->type == gl518sm_r80)
638 data->groups[1] = &gl518_group_r80;
639
640 hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
641 data, data->groups);
642 return PTR_ERR_OR_ZERO(hwmon_dev);
643}
644
645static const struct i2c_device_id gl518_id[] = {
646 { "gl518sm", 0 },
647 { }
648};
649MODULE_DEVICE_TABLE(i2c, gl518_id);
650
651static struct i2c_driver gl518_driver = {
652 .class = I2C_CLASS_HWMON,
653 .driver = {
654 .name = "gl518sm",
655 },
656 .probe = gl518_probe,
657 .id_table = gl518_id,
658 .detect = gl518_detect,
659 .address_list = normal_i2c,
660};
661
662module_i2c_driver(gl518_driver);
663
664MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
665 "Kyosti Malkki <kmalkki@cc.hut.fi> and "
666 "Hong-Gunn Chew <hglinux@gunnet.org>");
667MODULE_DESCRIPTION("GL518SM driver");
668MODULE_LICENSE("GPL");
669
