// SPDX-License-Identifier: GPL-2.0-only
/* linux/drivers/hwmon/s3c-hwmon.c
 *
 * Copyright (C) 2005, 2008, 2009 Simtec Electronics
 *      http://armlinux.simtec.co.uk/
 *      Ben Dooks <ben@simtec.co.uk>
 *
 * S3C24XX/S3C64XX ADC hwmon support
*/

#include <linux/module.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>

#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>

#include <plat/adc.h>
#include <linux/platform_data/hwmon-s3c.h>

struct s3c_hwmon_attr {
        struct sensor_device_attribute  in;
        struct sensor_device_attribute  label;
        char                            in_name[12];
        char                            label_name[12];
};

/**
 * struct s3c_hwmon - ADC hwmon client information
 * @lock: Access lock to serialise the conversions.
 * @client: The client we registered with the S3C ADC core.
 * @hwmon_dev: The hwmon device we created.
 * @attr: The holders for the channel attributes.
*/
struct s3c_hwmon {
        struct mutex            lock;
        struct s3c_adc_client   *client;
        struct device           *hwmon_dev;

        struct s3c_hwmon_attr   attrs[8];
};

/**
 * s3c_hwmon_read_ch - read a value from a given adc channel.
 * @dev: The device.
 * @hwmon: Our state.
 * @channel: The channel we're reading from.
 *
 * Read a value from the @channel with the proper locking and sleep until
 * either the read completes or we timeout awaiting the ADC core to get
 * back to us.
 */
static int s3c_hwmon_read_ch(struct device *dev,
                             struct s3c_hwmon *hwmon, int channel)
{
        int ret;

        ret = mutex_lock_interruptible(&hwmon->lock);
        if (ret < 0)
                return ret;

        dev_dbg(dev, "reading channel %d\n", channel);

        ret = s3c_adc_read(hwmon->client, channel);
        mutex_unlock(&hwmon->lock);

        return ret;
}

#ifdef CONFIG_SENSORS_S3C_RAW
/**
 * s3c_hwmon_show_raw - show a conversion from the raw channel number.
 * @dev: The device that the attribute belongs to.
 * @attr: The attribute being read.
 * @buf: The result buffer.
 *
 * This show deals with the raw attribute, registered for each possible
 * ADC channel. This does a conversion and returns the raw (un-scaled)
 * value returned from the hardware.
 */
static ssize_t s3c_hwmon_show_raw(struct device *dev,
                                  struct device_attribute *attr, char *buf)
{
        struct s3c_hwmon *adc = dev_get_drvdata(dev);
        struct sensor_device_attribute *sa = to_sensor_dev_attr(attr);
        int ret;

        ret = s3c_hwmon_read_ch(dev, adc, sa->index);

        return  (ret < 0) ? ret : snprintf(buf, PAGE_SIZE, "%d\n", ret);
}

static SENSOR_DEVICE_ATTR(adc0_raw, S_IRUGO, s3c_hwmon_show_raw, NULL, 0);
static SENSOR_DEVICE_ATTR(adc1_raw, S_IRUGO, s3c_hwmon_show_raw, NULL, 1);
static SENSOR_DEVICE_ATTR(adc2_raw, S_IRUGO, s3c_hwmon_show_raw, NULL, 2);
static SENSOR_DEVICE_ATTR(adc3_raw, S_IRUGO, s3c_hwmon_show_raw, NULL, 3);
static SENSOR_DEVICE_ATTR(adc4_raw, S_IRUGO, s3c_hwmon_show_raw, NULL, 4);
static SENSOR_DEVICE_ATTR(adc5_raw, S_IRUGO, s3c_hwmon_show_raw, NULL, 5);
static SENSOR_DEVICE_ATTR(adc6_raw, S_IRUGO, s3c_hwmon_show_raw, NULL, 6);
static SENSOR_DEVICE_ATTR(adc7_raw, S_IRUGO, s3c_hwmon_show_raw, NULL, 7);

static struct attribute *s3c_hwmon_attrs[9] = {
        &sensor_dev_attr_adc0_raw.dev_attr.attr,
        &sensor_dev_attr_adc1_raw.dev_attr.attr,
        &sensor_dev_attr_adc2_raw.dev_attr.attr,
        &sensor_dev_attr_adc3_raw.dev_attr.attr,
        &sensor_dev_attr_adc4_raw.dev_attr.attr,
        &sensor_dev_attr_adc5_raw.dev_attr.attr,
        &sensor_dev_attr_adc6_raw.dev_attr.attr,
        &sensor_dev_attr_adc7_raw.dev_attr.attr,
        NULL,
};

static struct attribute_group s3c_hwmon_attrgroup = {
        .attrs  = s3c_hwmon_attrs,
};

static inline int s3c_hwmon_add_raw(struct device *dev)
{
        return sysfs_create_group(&dev->kobj, &s3c_hwmon_attrgroup);
}

static inline void s3c_hwmon_remove_raw(struct device *dev)
{
        sysfs_remove_group(&dev->kobj, &s3c_hwmon_attrgroup);
}

#else

static inline int s3c_hwmon_add_raw(struct device *dev) { return 0; }
static inline void s3c_hwmon_remove_raw(struct device *dev) { }

#endif /* CONFIG_SENSORS_S3C_RAW */

/**
 * s3c_hwmon_ch_show - show value of a given channel
 * @dev: The device that the attribute belongs to.
 * @attr: The attribute being read.
 * @buf: The result buffer.
 *
 * Read a value from the ADC and scale it before returning it to the
 * caller. The scale factor is gained from the channel configuration
 * passed via the platform data when the device was registered.
 */
static ssize_t s3c_hwmon_ch_show(struct device *dev,
                                 struct device_attribute *attr,
                                 char *buf)
{
        struct sensor_device_attribute *sen_attr = to_sensor_dev_attr(attr);
        struct s3c_hwmon *hwmon = dev_get_drvdata(dev);
        struct s3c_hwmon_pdata *pdata = dev_get_platdata(dev);
        struct s3c_hwmon_chcfg *cfg;
        int ret;

        cfg = pdata->in[sen_attr->index];

        ret = s3c_hwmon_read_ch(dev, hwmon, sen_attr->index);
        if (ret < 0)
                return ret;

        ret *= cfg->mult;
        ret = DIV_ROUND_CLOSEST(ret, cfg->div);

        return snprintf(buf, PAGE_SIZE, "%d\n", ret);
}

/**
 * s3c_hwmon_label_show - show label name of the given channel.
 * @dev: The device that the attribute belongs to.
 * @attr: The attribute being read.
 * @buf: The result buffer.
 *
 * Return the label name of a given channel
 */
static ssize_t s3c_hwmon_label_show(struct device *dev,
                                    struct device_attribute *attr,
                                    char *buf)
{
        struct sensor_device_attribute *sen_attr = to_sensor_dev_attr(attr);
        struct s3c_hwmon_pdata *pdata = dev_get_platdata(dev);
        struct s3c_hwmon_chcfg *cfg;

        cfg = pdata->in[sen_attr->index];

        return snprintf(buf, PAGE_SIZE, "%s\n", cfg->name);
}

/**
 * s3c_hwmon_create_attr - create hwmon attribute for given channel.
 * @dev: The device to create the attribute on.
 * @cfg: The channel configuration passed from the platform data.
 * @channel: The ADC channel number to process.
 *
 * Create the scaled attribute for use with hwmon from the specified
 * platform data in @pdata. The sysfs entry is handled by the routine
 * s3c_hwmon_ch_show().
 *
 * The attribute name is taken from the configuration data if present
 * otherwise the name is taken by concatenating in_ with the channel
 * number.
 */
static int s3c_hwmon_create_attr(struct device *dev,
                                 struct s3c_hwmon_chcfg *cfg,
                                 struct s3c_hwmon_attr *attrs,
                                 int channel)
{
        struct sensor_device_attribute *attr;
        int ret;

        snprintf(attrs->in_name, sizeof(attrs->in_name), "in%d_input", channel);

        attr = &attrs->in;
        attr->index = channel;
        sysfs_attr_init(&attr->dev_attr.attr);
        attr->dev_attr.attr.name  = attrs->in_name;
        attr->dev_attr.attr.mode  = S_IRUGO;
        attr->dev_attr.show = s3c_hwmon_ch_show;

        ret =  device_create_file(dev, &attr->dev_attr);
        if (ret < 0) {
                dev_err(dev, "failed to create input attribute\n");
                return ret;
        }

        /* if this has a name, add a label */
        if (cfg->name) {
                snprintf(attrs->label_name, sizeof(attrs->label_name),
                         "in%d_label", channel);

                attr = &attrs->label;
                attr->index = channel;
                sysfs_attr_init(&attr->dev_attr.attr);
                attr->dev_attr.attr.name  = attrs->label_name;
                attr->dev_attr.attr.mode  = S_IRUGO;
                attr->dev_attr.show = s3c_hwmon_label_show;

                ret = device_create_file(dev, &attr->dev_attr);
                if (ret < 0) {
                        device_remove_file(dev, &attrs->in.dev_attr);
                        dev_err(dev, "failed to create label attribute\n");
                }
        }

        return ret;
}

static void s3c_hwmon_remove_attr(struct device *dev,
                                  struct s3c_hwmon_attr *attrs)
{
        device_remove_file(dev, &attrs->in.dev_attr);
        device_remove_file(dev, &attrs->label.dev_attr);
}

/**
 * s3c_hwmon_probe - device probe entry.
 * @dev: The device being probed.
*/
static int s3c_hwmon_probe(struct platform_device *dev)
{
        struct s3c_hwmon_pdata *pdata = dev_get_platdata(&dev->dev);
        struct s3c_hwmon *hwmon;
        int ret = 0;
        int i;

        if (!pdata) {
                dev_err(&dev->dev, "no platform data supplied\n");
                return -EINVAL;
        }

        hwmon = devm_kzalloc(&dev->dev, sizeof(struct s3c_hwmon), GFP_KERNEL);
        if (hwmon == NULL)
                return -ENOMEM;

        platform_set_drvdata(dev, hwmon);

        mutex_init(&hwmon->lock);

        /* Register with the core ADC driver. */

        hwmon->client = s3c_adc_register(dev, NULL, NULL, 0);
        if (IS_ERR(hwmon->client)) {
                dev_err(&dev->dev, "cannot register adc\n");
                return PTR_ERR(hwmon->client);
        }

        /* add attributes for our adc devices. */

        ret = s3c_hwmon_add_raw(&dev->dev);
        if (ret)
                goto err_registered;

        /* register with the hwmon core */

        hwmon->hwmon_dev = hwmon_device_register(&dev->dev);
        if (IS_ERR(hwmon->hwmon_dev)) {
                dev_err(&dev->dev, "error registering with hwmon\n");
                ret = PTR_ERR(hwmon->hwmon_dev);
                goto err_raw_attribute;
        }

        for (i = 0; i < ARRAY_SIZE(pdata->in); i++) {
                struct s3c_hwmon_chcfg *cfg = pdata->in[i];

                if (!cfg)
                        continue;

                if (cfg->mult >= 0x10000)
                        dev_warn(&dev->dev,
                                 "channel %d multiplier too large\n",
                                 i);

                if (cfg->div == 0) {
                        dev_err(&dev->dev, "channel %d divider zero\n", i);
                        continue;
                }

                ret = s3c_hwmon_create_attr(&dev->dev, pdata->in[i],
                                            &hwmon->attrs[i], i);
                if (ret) {
                        dev_err(&dev->dev,
                                        "error creating channel %d\n", i);

                        for (i--; i >= 0; i--)
                                s3c_hwmon_remove_attr(&dev->dev,
                                                              &hwmon->attrs[i]);

                        goto err_hwmon_register;
                }
        }

        return 0;

 err_hwmon_register:
        hwmon_device_unregister(hwmon->hwmon_dev);

 err_raw_attribute:
        s3c_hwmon_remove_raw(&dev->dev);

 err_registered:
        s3c_adc_release(hwmon->client);

        return ret;
}

static int s3c_hwmon_remove(struct platform_device *dev)
{
        struct s3c_hwmon *hwmon = platform_get_drvdata(dev);
        int i;

        s3c_hwmon_remove_raw(&dev->dev);

        for (i = 0; i < ARRAY_SIZE(hwmon->attrs); i++)
                s3c_hwmon_remove_attr(&dev->dev, &hwmon->attrs[i]);

        hwmon_device_unregister(hwmon->hwmon_dev);
        s3c_adc_release(hwmon->client);

        return 0;
}

static struct platform_driver s3c_hwmon_driver = {
        .driver = {
                .name           = "s3c-hwmon",
        },
        .probe          = s3c_hwmon_probe,
        .remove         = s3c_hwmon_remove,
};

module_platform_driver(s3c_hwmon_driver);

MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
MODULE_DESCRIPTION("S3C ADC HWMon driver");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:s3c-hwmon");