linux/drivers/ide/sgiioc4.c
<<
>>
Prefs
   1/*
   2 * Copyright (c) 2003-2006 Silicon Graphics, Inc.  All Rights Reserved.
   3 * Copyright (C) 2008-2009 MontaVista Software, Inc.
   4 *
   5 * This program is free software; you can redistribute it and/or modify it
   6 * under the terms of version 2 of the GNU General Public License
   7 * as published by the Free Software Foundation.
   8 *
   9 * This program is distributed in the hope that it would be useful, but
  10 * WITHOUT ANY WARRANTY; without even the implied warranty of
  11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  12 *
  13 * You should have received a copy of the GNU General Public
  14 * License along with this program; if not, write the Free Software
  15 * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
  16 *
  17 * For further information regarding this notice, see:
  18 *
  19 * http://oss.sgi.com/projects/GenInfo/NoticeExplan
  20 */
  21
  22#include <linux/module.h>
  23#include <linux/types.h>
  24#include <linux/pci.h>
  25#include <linux/delay.h>
  26#include <linux/init.h>
  27#include <linux/kernel.h>
  28#include <linux/ioport.h>
  29#include <linux/blkdev.h>
  30#include <linux/scatterlist.h>
  31#include <linux/ioc4.h>
  32#include <linux/io.h>
  33#include <linux/ide.h>
  34
  35#define DRV_NAME "SGIIOC4"
  36
  37/* IOC4 Specific Definitions */
  38#define IOC4_CMD_OFFSET         0x100
  39#define IOC4_CTRL_OFFSET        0x120
  40#define IOC4_DMA_OFFSET         0x140
  41#define IOC4_INTR_OFFSET        0x0
  42
  43#define IOC4_TIMING             0x00
  44#define IOC4_DMA_PTR_L          0x01
  45#define IOC4_DMA_PTR_H          0x02
  46#define IOC4_DMA_ADDR_L         0x03
  47#define IOC4_DMA_ADDR_H         0x04
  48#define IOC4_BC_DEV             0x05
  49#define IOC4_BC_MEM             0x06
  50#define IOC4_DMA_CTRL           0x07
  51#define IOC4_DMA_END_ADDR       0x08
  52
  53/* Bits in the IOC4 Control/Status Register */
  54#define IOC4_S_DMA_START        0x01
  55#define IOC4_S_DMA_STOP         0x02
  56#define IOC4_S_DMA_DIR          0x04
  57#define IOC4_S_DMA_ACTIVE       0x08
  58#define IOC4_S_DMA_ERROR        0x10
  59#define IOC4_ATA_MEMERR         0x02
  60
  61/* Read/Write Directions */
  62#define IOC4_DMA_WRITE          0x04
  63#define IOC4_DMA_READ           0x00
  64
  65/* Interrupt Register Offsets */
  66#define IOC4_INTR_REG           0x03
  67#define IOC4_INTR_SET           0x05
  68#define IOC4_INTR_CLEAR         0x07
  69
  70#define IOC4_IDE_CACHELINE_SIZE 128
  71#define IOC4_CMD_CTL_BLK_SIZE   0x20
  72#define IOC4_SUPPORTED_FIRMWARE_REV 46
  73
  74struct ioc4_dma_regs {
  75        u32 timing_reg0;
  76        u32 timing_reg1;
  77        u32 low_mem_ptr;
  78        u32 high_mem_ptr;
  79        u32 low_mem_addr;
  80        u32 high_mem_addr;
  81        u32 dev_byte_count;
  82        u32 mem_byte_count;
  83        u32 status;
  84};
  85
  86/* Each Physical Region Descriptor Entry size is 16 bytes (2 * 64 bits) */
  87/* IOC4 has only 1 IDE channel */
  88#define IOC4_PRD_BYTES          16
  89#define IOC4_PRD_ENTRIES        (PAGE_SIZE / (4 * IOC4_PRD_BYTES))
  90
  91
  92static void sgiioc4_init_hwif_ports(struct ide_hw *hw,
  93                                    unsigned long data_port,
  94                                    unsigned long ctrl_port,
  95                                    unsigned long irq_port)
  96{
  97        unsigned long reg = data_port;
  98        int i;
  99
 100        /* Registers are word (32 bit) aligned */
 101        for (i = 0; i <= 7; i++)
 102                hw->io_ports_array[i] = reg + i * 4;
 103
 104        hw->io_ports.ctl_addr = ctrl_port;
 105        hw->io_ports.irq_addr = irq_port;
 106}
 107
 108static int sgiioc4_checkirq(ide_hwif_t *hwif)
 109{
 110        unsigned long intr_addr = hwif->io_ports.irq_addr + IOC4_INTR_REG * 4;
 111
 112        if (readl((void __iomem *)intr_addr) & 0x03)
 113                return 1;
 114
 115        return 0;
 116}
 117
 118static u8 sgiioc4_read_status(ide_hwif_t *);
 119
 120static int sgiioc4_clearirq(ide_drive_t *drive)
 121{
 122        u32 intr_reg;
 123        ide_hwif_t *hwif = drive->hwif;
 124        struct ide_io_ports *io_ports = &hwif->io_ports;
 125        unsigned long other_ir = io_ports->irq_addr + (IOC4_INTR_REG << 2);
 126
 127        /* Code to check for PCI error conditions */
 128        intr_reg = readl((void __iomem *)other_ir);
 129        if (intr_reg & 0x03) { /* Valid IOC4-IDE interrupt */
 130                /*
 131                 * Using sgiioc4_read_status to read the Status register has a
 132                 * side effect of clearing the interrupt.  The first read should
 133                 * clear it if it is set.  The second read should return
 134                 * a "clear" status if it got cleared.  If not, then spin
 135                 * for a bit trying to clear it.
 136                 */
 137                u8 stat = sgiioc4_read_status(hwif);
 138                int count = 0;
 139
 140                stat = sgiioc4_read_status(hwif);
 141                while ((stat & ATA_BUSY) && (count++ < 100)) {
 142                        udelay(1);
 143                        stat = sgiioc4_read_status(hwif);
 144                }
 145
 146                if (intr_reg & 0x02) {
 147                        struct pci_dev *dev = to_pci_dev(hwif->dev);
 148                        /* Error when transferring DMA data on PCI bus */
 149                        u32 pci_err_addr_low, pci_err_addr_high,
 150                            pci_stat_cmd_reg;
 151
 152                        pci_err_addr_low =
 153                                readl((void __iomem *)io_ports->irq_addr);
 154                        pci_err_addr_high =
 155                                readl((void __iomem *)(io_ports->irq_addr + 4));
 156                        pci_read_config_dword(dev, PCI_COMMAND,
 157                                              &pci_stat_cmd_reg);
 158                        printk(KERN_ERR "%s(%s): PCI Bus Error when doing DMA: "
 159                               "status-cmd reg is 0x%x\n",
 160                               __func__, drive->name, pci_stat_cmd_reg);
 161                        printk(KERN_ERR "%s(%s): PCI Error Address is 0x%x%x\n",
 162                               __func__, drive->name,
 163                               pci_err_addr_high, pci_err_addr_low);
 164                        /* Clear the PCI Error indicator */
 165                        pci_write_config_dword(dev, PCI_COMMAND, 0x00000146);
 166                }
 167
 168                /* Clear the Interrupt, Error bits on the IOC4 */
 169                writel(0x03, (void __iomem *)other_ir);
 170
 171                intr_reg = readl((void __iomem *)other_ir);
 172        }
 173
 174        return intr_reg & 3;
 175}
 176
 177static void sgiioc4_dma_start(ide_drive_t *drive)
 178{
 179        ide_hwif_t *hwif = drive->hwif;
 180        unsigned long ioc4_dma_addr = hwif->dma_base + IOC4_DMA_CTRL * 4;
 181        unsigned int reg = readl((void __iomem *)ioc4_dma_addr);
 182        unsigned int temp_reg = reg | IOC4_S_DMA_START;
 183
 184        writel(temp_reg, (void __iomem *)ioc4_dma_addr);
 185}
 186
 187static u32 sgiioc4_ide_dma_stop(ide_hwif_t *hwif, u64 dma_base)
 188{
 189        unsigned long ioc4_dma_addr = dma_base + IOC4_DMA_CTRL * 4;
 190        u32     ioc4_dma;
 191        int     count;
 192
 193        count = 0;
 194        ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
 195        while ((ioc4_dma & IOC4_S_DMA_STOP) && (count++ < 200)) {
 196                udelay(1);
 197                ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
 198        }
 199        return ioc4_dma;
 200}
 201
 202/* Stops the IOC4 DMA Engine */
 203static int sgiioc4_dma_end(ide_drive_t *drive)
 204{
 205        u32 ioc4_dma, bc_dev, bc_mem, num, valid = 0, cnt = 0;
 206        ide_hwif_t *hwif = drive->hwif;
 207        unsigned long dma_base = hwif->dma_base;
 208        int dma_stat = 0;
 209        unsigned long *ending_dma = ide_get_hwifdata(hwif);
 210
 211        writel(IOC4_S_DMA_STOP, (void __iomem *)(dma_base + IOC4_DMA_CTRL * 4));
 212
 213        ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
 214
 215        if (ioc4_dma & IOC4_S_DMA_STOP) {
 216                printk(KERN_ERR
 217                       "%s(%s): IOC4 DMA STOP bit is still 1 :"
 218                       "ioc4_dma_reg 0x%x\n",
 219                       __func__, drive->name, ioc4_dma);
 220                dma_stat = 1;
 221        }
 222
 223        /*
 224         * The IOC4 will DMA 1's to the ending DMA area to indicate that
 225         * previous data DMA is complete.  This is necessary because of relaxed
 226         * ordering between register reads and DMA writes on the Altix.
 227         */
 228        while ((cnt++ < 200) && (!valid)) {
 229                for (num = 0; num < 16; num++) {
 230                        if (ending_dma[num]) {
 231                                valid = 1;
 232                                break;
 233                        }
 234                }
 235                udelay(1);
 236        }
 237        if (!valid) {
 238                printk(KERN_ERR "%s(%s) : DMA incomplete\n", __func__,
 239                       drive->name);
 240                dma_stat = 1;
 241        }
 242
 243        bc_dev = readl((void __iomem *)(dma_base + IOC4_BC_DEV * 4));
 244        bc_mem = readl((void __iomem *)(dma_base + IOC4_BC_MEM * 4));
 245
 246        if ((bc_dev & 0x01FF) || (bc_mem & 0x1FF)) {
 247                if (bc_dev > bc_mem + 8) {
 248                        printk(KERN_ERR
 249                               "%s(%s): WARNING!! byte_count_dev %d "
 250                               "!= byte_count_mem %d\n",
 251                               __func__, drive->name, bc_dev, bc_mem);
 252                }
 253        }
 254
 255        return dma_stat;
 256}
 257
 258static void sgiioc4_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 259{
 260}
 261
 262/* Returns 1 if DMA IRQ issued, 0 otherwise */
 263static int sgiioc4_dma_test_irq(ide_drive_t *drive)
 264{
 265        return sgiioc4_checkirq(drive->hwif);
 266}
 267
 268static void sgiioc4_dma_host_set(ide_drive_t *drive, int on)
 269{
 270        if (!on)
 271                sgiioc4_clearirq(drive);
 272}
 273
 274static void sgiioc4_resetproc(ide_drive_t *drive)
 275{
 276        struct ide_cmd *cmd = &drive->hwif->cmd;
 277
 278        sgiioc4_dma_end(drive);
 279        ide_dma_unmap_sg(drive, cmd);
 280        sgiioc4_clearirq(drive);
 281}
 282
 283static void sgiioc4_dma_lost_irq(ide_drive_t *drive)
 284{
 285        sgiioc4_resetproc(drive);
 286
 287        ide_dma_lost_irq(drive);
 288}
 289
 290static u8 sgiioc4_read_status(ide_hwif_t *hwif)
 291{
 292        unsigned long port = hwif->io_ports.status_addr;
 293        u8 reg = (u8) readb((void __iomem *) port);
 294
 295        if (!(reg & ATA_BUSY)) {        /* Not busy... check for interrupt */
 296                unsigned long other_ir = port - 0x110;
 297                unsigned int intr_reg = (u32) readl((void __iomem *) other_ir);
 298
 299                /* Clear the Interrupt, Error bits on the IOC4 */
 300                if (intr_reg & 0x03) {
 301                        writel(0x03, (void __iomem *) other_ir);
 302                        intr_reg = (u32) readl((void __iomem *) other_ir);
 303                }
 304        }
 305
 306        return reg;
 307}
 308
 309/* Creates a DMA map for the scatter-gather list entries */
 310static int ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d)
 311{
 312        struct pci_dev *dev = to_pci_dev(hwif->dev);
 313        unsigned long dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET;
 314        int num_ports = sizeof(struct ioc4_dma_regs);
 315        void *pad;
 316
 317        printk(KERN_INFO "    %s: MMIO-DMA\n", hwif->name);
 318
 319        if (request_mem_region(dma_base, num_ports, hwif->name) == NULL) {
 320                printk(KERN_ERR "%s(%s) -- ERROR: addresses 0x%08lx to 0x%08lx "
 321                       "already in use\n", __func__, hwif->name,
 322                       dma_base, dma_base + num_ports - 1);
 323                return -1;
 324        }
 325
 326        hwif->dma_base = (unsigned long)hwif->io_ports.irq_addr +
 327                         IOC4_DMA_OFFSET;
 328
 329        hwif->sg_max_nents = IOC4_PRD_ENTRIES;
 330
 331        hwif->prd_max_nents = IOC4_PRD_ENTRIES;
 332        hwif->prd_ent_size = IOC4_PRD_BYTES;
 333
 334        if (ide_allocate_dma_engine(hwif))
 335                goto dma_pci_alloc_failure;
 336
 337        pad = dma_alloc_coherent(&dev->dev, IOC4_IDE_CACHELINE_SIZE,
 338                                   (dma_addr_t *)&hwif->extra_base, GFP_KERNEL);
 339        if (pad) {
 340                ide_set_hwifdata(hwif, pad);
 341                return 0;
 342        }
 343
 344        ide_release_dma_engine(hwif);
 345
 346        printk(KERN_ERR "%s(%s) -- ERROR: Unable to allocate DMA maps\n",
 347               __func__, hwif->name);
 348        printk(KERN_INFO "%s: changing from DMA to PIO mode", hwif->name);
 349
 350dma_pci_alloc_failure:
 351        release_mem_region(dma_base, num_ports);
 352
 353        return -1;
 354}
 355
 356/* Initializes the IOC4 DMA Engine */
 357static void sgiioc4_configure_for_dma(int dma_direction, ide_drive_t *drive)
 358{
 359        u32 ioc4_dma;
 360        ide_hwif_t *hwif = drive->hwif;
 361        unsigned long dma_base = hwif->dma_base;
 362        unsigned long ioc4_dma_addr = dma_base + IOC4_DMA_CTRL * 4;
 363        u32 dma_addr, ending_dma_addr;
 364
 365        ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
 366
 367        if (ioc4_dma & IOC4_S_DMA_ACTIVE) {
 368                printk(KERN_WARNING "%s(%s): Warning!! DMA from previous "
 369                       "transfer was still active\n", __func__, drive->name);
 370                writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr);
 371                ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
 372
 373                if (ioc4_dma & IOC4_S_DMA_STOP)
 374                        printk(KERN_ERR "%s(%s): IOC4 DMA STOP bit is "
 375                               "still 1\n", __func__, drive->name);
 376        }
 377
 378        ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
 379        if (ioc4_dma & IOC4_S_DMA_ERROR) {
 380                printk(KERN_WARNING "%s(%s): Warning!! DMA Error during "
 381                       "previous transfer, status 0x%x\n",
 382                       __func__, drive->name, ioc4_dma);
 383                writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr);
 384                ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
 385
 386                if (ioc4_dma & IOC4_S_DMA_STOP)
 387                        printk(KERN_ERR "%s(%s): IOC4 DMA STOP bit is "
 388                               "still 1\n", __func__, drive->name);
 389        }
 390
 391        /* Address of the Scatter Gather List */
 392        dma_addr = cpu_to_le32(hwif->dmatable_dma);
 393        writel(dma_addr, (void __iomem *)(dma_base + IOC4_DMA_PTR_L * 4));
 394
 395        /* Address of the Ending DMA */
 396        memset(ide_get_hwifdata(hwif), 0, IOC4_IDE_CACHELINE_SIZE);
 397        ending_dma_addr = cpu_to_le32(hwif->extra_base);
 398        writel(ending_dma_addr, (void __iomem *)(dma_base +
 399                                                 IOC4_DMA_END_ADDR * 4));
 400
 401        writel(dma_direction, (void __iomem *)ioc4_dma_addr);
 402}
 403
 404/* IOC4 Scatter Gather list Format                                       */
 405/* 128 Bit entries to support 64 bit addresses in the future             */
 406/* The Scatter Gather list Entry should be in the BIG-ENDIAN Format      */
 407/* --------------------------------------------------------------------- */
 408/* | Upper 32 bits - Zero           |           Lower 32 bits- address | */
 409/* --------------------------------------------------------------------- */
 410/* | Upper 32 bits - Zero           |EOL| 15 unused     | 16 Bit Length| */
 411/* --------------------------------------------------------------------- */
 412/* Creates the scatter gather list, DMA Table                            */
 413
 414static int sgiioc4_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd)
 415{
 416        ide_hwif_t *hwif = drive->hwif;
 417        unsigned int *table = hwif->dmatable_cpu;
 418        unsigned int count = 0, i = cmd->sg_nents;
 419        struct scatterlist *sg = hwif->sg_table;
 420
 421        while (i && sg_dma_len(sg)) {
 422                dma_addr_t cur_addr;
 423                int cur_len;
 424                cur_addr = sg_dma_address(sg);
 425                cur_len = sg_dma_len(sg);
 426
 427                while (cur_len) {
 428                        if (count++ >= IOC4_PRD_ENTRIES) {
 429                                printk(KERN_WARNING
 430                                       "%s: DMA table too small\n",
 431                                       drive->name);
 432                                return 0;
 433                        } else {
 434                                u32 bcount =
 435                                    0x10000 - (cur_addr & 0xffff);
 436
 437                                if (bcount > cur_len)
 438                                        bcount = cur_len;
 439
 440                                /*
 441                                 * Put the address, length in
 442                                 * the IOC4 dma-table format
 443                                 */
 444                                *table = 0x0;
 445                                table++;
 446                                *table = cpu_to_be32(cur_addr);
 447                                table++;
 448                                *table = 0x0;
 449                                table++;
 450
 451                                *table = cpu_to_be32(bcount);
 452                                table++;
 453
 454                                cur_addr += bcount;
 455                                cur_len -= bcount;
 456                        }
 457                }
 458
 459                sg = sg_next(sg);
 460                i--;
 461        }
 462
 463        if (count) {
 464                table--;
 465                *table |= cpu_to_be32(0x80000000);
 466                return count;
 467        }
 468
 469        return 0;               /* revert to PIO for this request */
 470}
 471
 472static int sgiioc4_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
 473{
 474        int ddir;
 475        u8 write = !!(cmd->tf_flags & IDE_TFLAG_WRITE);
 476
 477        if (sgiioc4_build_dmatable(drive, cmd) == 0)
 478                /* try PIO instead of DMA */
 479                return 1;
 480
 481        if (write)
 482                /* Writes TO the IOC4 FROM Main Memory */
 483                ddir = IOC4_DMA_READ;
 484        else
 485                /* Writes FROM the IOC4 TO Main Memory */
 486                ddir = IOC4_DMA_WRITE;
 487
 488        sgiioc4_configure_for_dma(ddir, drive);
 489
 490        return 0;
 491}
 492
 493static const struct ide_tp_ops sgiioc4_tp_ops = {
 494        .exec_command           = ide_exec_command,
 495        .read_status            = sgiioc4_read_status,
 496        .read_altstatus         = ide_read_altstatus,
 497        .write_devctl           = ide_write_devctl,
 498
 499        .dev_select             = ide_dev_select,
 500        .tf_load                = ide_tf_load,
 501        .tf_read                = ide_tf_read,
 502
 503        .input_data             = ide_input_data,
 504        .output_data            = ide_output_data,
 505};
 506
 507static const struct ide_port_ops sgiioc4_port_ops = {
 508        .set_dma_mode           = sgiioc4_set_dma_mode,
 509        /* reset DMA engine, clear IRQs */
 510        .resetproc              = sgiioc4_resetproc,
 511};
 512
 513static const struct ide_dma_ops sgiioc4_dma_ops = {
 514        .dma_host_set           = sgiioc4_dma_host_set,
 515        .dma_setup              = sgiioc4_dma_setup,
 516        .dma_start              = sgiioc4_dma_start,
 517        .dma_end                = sgiioc4_dma_end,
 518        .dma_test_irq           = sgiioc4_dma_test_irq,
 519        .dma_lost_irq           = sgiioc4_dma_lost_irq,
 520};
 521
 522static const struct ide_port_info sgiioc4_port_info = {
 523        .name                   = DRV_NAME,
 524        .chipset                = ide_pci,
 525        .init_dma               = ide_dma_sgiioc4,
 526        .tp_ops                 = &sgiioc4_tp_ops,
 527        .port_ops               = &sgiioc4_port_ops,
 528        .dma_ops                = &sgiioc4_dma_ops,
 529        .host_flags             = IDE_HFLAG_MMIO,
 530        .irq_flags              = IRQF_SHARED,
 531        .mwdma_mask             = ATA_MWDMA2_ONLY,
 532};
 533
 534static int sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 535{
 536        unsigned long cmd_base, irqport;
 537        unsigned long bar0, cmd_phys_base, ctl;
 538        void __iomem *virt_base;
 539        struct ide_hw hw, *hws[] = { &hw };
 540        int rc;
 541
 542        /* Get the CmdBlk and CtrlBlk base registers */
 543        bar0 = pci_resource_start(dev, 0);
 544        virt_base = pci_ioremap_bar(dev, 0);
 545        if (virt_base == NULL) {
 546                printk(KERN_ERR "%s: Unable to remap BAR 0 address: 0x%lx\n",
 547                                DRV_NAME, bar0);
 548                return -ENOMEM;
 549        }
 550        cmd_base = (unsigned long)virt_base + IOC4_CMD_OFFSET;
 551        ctl = (unsigned long)virt_base + IOC4_CTRL_OFFSET;
 552        irqport = (unsigned long)virt_base + IOC4_INTR_OFFSET;
 553
 554        cmd_phys_base = bar0 + IOC4_CMD_OFFSET;
 555        if (request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE,
 556                               DRV_NAME) == NULL) {
 557                printk(KERN_ERR "%s %s -- ERROR: addresses 0x%08lx to 0x%08lx "
 558                       "already in use\n", DRV_NAME, pci_name(dev),
 559                       cmd_phys_base, cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE);
 560                rc = -EBUSY;
 561                goto req_mem_rgn_err;
 562        }
 563
 564        /* Initialize the IO registers */
 565        memset(&hw, 0, sizeof(hw));
 566        sgiioc4_init_hwif_ports(&hw, cmd_base, ctl, irqport);
 567        hw.irq = dev->irq;
 568        hw.dev = &dev->dev;
 569
 570        /* Initialize chipset IRQ registers */
 571        writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4));
 572
 573        rc = ide_host_add(&sgiioc4_port_info, hws, 1, NULL);
 574        if (!rc)
 575                return 0;
 576
 577        release_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE);
 578req_mem_rgn_err:
 579        iounmap(virt_base);
 580        return rc;
 581}
 582
 583static unsigned int pci_init_sgiioc4(struct pci_dev *dev)
 584{
 585        int ret;
 586
 587        printk(KERN_INFO "%s: IDE controller at PCI slot %s, revision %d\n",
 588                         DRV_NAME, pci_name(dev), dev->revision);
 589
 590        if (dev->revision < IOC4_SUPPORTED_FIRMWARE_REV) {
 591                printk(KERN_ERR "Skipping %s IDE controller in slot %s: "
 592                                "firmware is obsolete - please upgrade to "
 593                                "revision46 or higher\n",
 594                                DRV_NAME, pci_name(dev));
 595                ret = -EAGAIN;
 596                goto out;
 597        }
 598        ret = sgiioc4_ide_setup_pci_device(dev);
 599out:
 600        return ret;
 601}
 602
 603static int ioc4_ide_attach_one(struct ioc4_driver_data *idd)
 604{
 605        /*
 606         * PCI-RT does not bring out IDE connection.
 607         * Do not attach to this particular IOC4.
 608         */
 609        if (idd->idd_variant == IOC4_VARIANT_PCI_RT)
 610                return 0;
 611
 612        return pci_init_sgiioc4(idd->idd_pdev);
 613}
 614
 615static struct ioc4_submodule ioc4_ide_submodule = {
 616        .is_name = "IOC4_ide",
 617        .is_owner = THIS_MODULE,
 618        .is_probe = ioc4_ide_attach_one,
 619};
 620
 621static int __init ioc4_ide_init(void)
 622{
 623        return ioc4_register_submodule(&ioc4_ide_submodule);
 624}
 625
 626late_initcall(ioc4_ide_init); /* Call only after IDE init is done */
 627
 628MODULE_AUTHOR("Aniket Malatpure/Jeremy Higdon");
 629MODULE_DESCRIPTION("IDE PCI driver module for SGI IOC4 Base-IO Card");
 630MODULE_LICENSE("GPL");
 631