1
2
3
4
5
6
7#include <linux/bitops.h>
8#include <linux/bitfield.h>
9#include <linux/clk.h>
10#include <linux/mfd/syscon.h>
11#include <linux/mmc/host.h>
12#include <linux/module.h>
13#include <linux/of_address.h>
14#include <linux/platform_device.h>
15#include <linux/pm_runtime.h>
16#include <linux/regmap.h>
17#include <linux/regulator/consumer.h>
18
19#include "dw_mmc.h"
20#include "dw_mmc-pltfm.h"
21
22
23
24
25
26#define AO_SCTRL_SEL18 BIT(10)
27#define AO_SCTRL_CTRL3 0x40C
28
29#define DWMMC_SDIO_ID 2
30
31#define SOC_SCTRL_SCPERCTRL5 (0x314)
32#define SDCARD_IO_SEL18 BIT(2)
33
34#define SDCARD_RD_THRESHOLD (512)
35
36#define GENCLK_DIV (7)
37
38#define GPIO_CLK_ENABLE BIT(16)
39#define GPIO_CLK_DIV_MASK GENMASK(11, 8)
40#define GPIO_USE_SAMPLE_DLY_MASK GENMASK(13, 13)
41#define UHS_REG_EXT_SAMPLE_PHASE_MASK GENMASK(20, 16)
42#define UHS_REG_EXT_SAMPLE_DRVPHASE_MASK GENMASK(25, 21)
43#define UHS_REG_EXT_SAMPLE_DLY_MASK GENMASK(30, 26)
44
45#define TIMING_MODE 3
46#define TIMING_CFG_NUM 10
47
48#define NUM_PHASES (40)
49
50#define ENABLE_SHIFT_MIN_SMPL (4)
51#define ENABLE_SHIFT_MAX_SMPL (12)
52#define USE_DLY_MIN_SMPL (11)
53#define USE_DLY_MAX_SMPL (14)
54
55struct k3_priv {
56 int ctrl_id;
57 u32 cur_speed;
58 struct regmap *reg;
59};
60
61static unsigned long dw_mci_hi6220_caps[] = {
62 MMC_CAP_CMD23,
63 MMC_CAP_CMD23,
64 0
65};
66
67struct hs_timing {
68 u32 drv_phase;
69 u32 smpl_dly;
70 u32 smpl_phase_max;
71 u32 smpl_phase_min;
72};
73
74static struct hs_timing hs_timing_cfg[TIMING_MODE][TIMING_CFG_NUM] = {
75 { },
76 {
77 {7, 0, 15, 15,},
78 {6, 0, 4, 4,},
79 {6, 0, 3, 3,},
80 {6, 0, 15, 15,},
81 {6, 0, 2, 2,},
82 {4, 0, 11, 0,},
83 {6, 4, 15, 0,},
84 {0},
85 {0},
86 {0},
87 },
88 {
89 {7, 0, 15, 15,},
90 {0},
91 {6, 0, 15, 15,},
92 {6, 0, 15, 15,},
93 {6, 0, 0, 0,},
94 {4, 0, 12, 0,},
95 {5, 4, 15, 0,},
96 {0},
97 {0},
98 {0},
99 }
100};
101
102static void dw_mci_k3_set_ios(struct dw_mci *host, struct mmc_ios *ios)
103{
104 int ret;
105
106 ret = clk_set_rate(host->ciu_clk, ios->clock);
107 if (ret)
108 dev_warn(host->dev, "failed to set rate %uHz\n", ios->clock);
109
110 host->bus_hz = clk_get_rate(host->ciu_clk);
111}
112
113static const struct dw_mci_drv_data k3_drv_data = {
114 .set_ios = dw_mci_k3_set_ios,
115};
116
117static int dw_mci_hi6220_parse_dt(struct dw_mci *host)
118{
119 struct k3_priv *priv;
120
121 priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL);
122 if (!priv)
123 return -ENOMEM;
124
125 priv->reg = syscon_regmap_lookup_by_phandle(host->dev->of_node,
126 "hisilicon,peripheral-syscon");
127 if (IS_ERR(priv->reg))
128 priv->reg = NULL;
129
130 priv->ctrl_id = of_alias_get_id(host->dev->of_node, "mshc");
131 if (priv->ctrl_id < 0)
132 priv->ctrl_id = 0;
133
134 if (priv->ctrl_id >= TIMING_MODE)
135 return -EINVAL;
136
137 host->priv = priv;
138 return 0;
139}
140
141static int dw_mci_hi6220_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
142{
143 struct dw_mci_slot *slot = mmc_priv(mmc);
144 struct k3_priv *priv;
145 struct dw_mci *host;
146 int min_uv, max_uv;
147 int ret;
148
149 host = slot->host;
150 priv = host->priv;
151
152 if (!priv || !priv->reg)
153 return 0;
154
155 if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
156 ret = regmap_update_bits(priv->reg, AO_SCTRL_CTRL3,
157 AO_SCTRL_SEL18, 0);
158 min_uv = 3000000;
159 max_uv = 3000000;
160 } else if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
161 ret = regmap_update_bits(priv->reg, AO_SCTRL_CTRL3,
162 AO_SCTRL_SEL18, AO_SCTRL_SEL18);
163 min_uv = 1800000;
164 max_uv = 1800000;
165 } else {
166 dev_dbg(host->dev, "voltage not supported\n");
167 return -EINVAL;
168 }
169
170 if (ret) {
171 dev_dbg(host->dev, "switch voltage failed\n");
172 return ret;
173 }
174
175 if (IS_ERR_OR_NULL(mmc->supply.vqmmc))
176 return 0;
177
178 ret = regulator_set_voltage(mmc->supply.vqmmc, min_uv, max_uv);
179 if (ret) {
180 dev_dbg(host->dev, "Regulator set error %d: %d - %d\n",
181 ret, min_uv, max_uv);
182 return ret;
183 }
184
185 return 0;
186}
187
188static void dw_mci_hi6220_set_ios(struct dw_mci *host, struct mmc_ios *ios)
189{
190 int ret;
191 unsigned int clock;
192
193 clock = (ios->clock <= 25000000) ? 25000000 : ios->clock;
194
195 ret = clk_set_rate(host->biu_clk, clock);
196 if (ret)
197 dev_warn(host->dev, "failed to set rate %uHz\n", clock);
198
199 host->bus_hz = clk_get_rate(host->biu_clk);
200}
201
202static int dw_mci_hi6220_execute_tuning(struct dw_mci_slot *slot, u32 opcode)
203{
204 return 0;
205}
206
207static const struct dw_mci_drv_data hi6220_data = {
208 .caps = dw_mci_hi6220_caps,
209 .num_caps = ARRAY_SIZE(dw_mci_hi6220_caps),
210 .switch_voltage = dw_mci_hi6220_switch_voltage,
211 .set_ios = dw_mci_hi6220_set_ios,
212 .parse_dt = dw_mci_hi6220_parse_dt,
213 .execute_tuning = dw_mci_hi6220_execute_tuning,
214};
215
216static void dw_mci_hs_set_timing(struct dw_mci *host, int timing,
217 int smpl_phase)
218{
219 u32 drv_phase;
220 u32 smpl_dly;
221 u32 use_smpl_dly = 0;
222 u32 enable_shift = 0;
223 u32 reg_value;
224 int ctrl_id;
225 struct k3_priv *priv;
226
227 priv = host->priv;
228 ctrl_id = priv->ctrl_id;
229
230 drv_phase = hs_timing_cfg[ctrl_id][timing].drv_phase;
231 smpl_dly = hs_timing_cfg[ctrl_id][timing].smpl_dly;
232 if (smpl_phase == -1)
233 smpl_phase = (hs_timing_cfg[ctrl_id][timing].smpl_phase_max +
234 hs_timing_cfg[ctrl_id][timing].smpl_phase_min) / 2;
235
236 switch (timing) {
237 case MMC_TIMING_UHS_SDR104:
238 if (smpl_phase >= USE_DLY_MIN_SMPL &&
239 smpl_phase <= USE_DLY_MAX_SMPL)
240 use_smpl_dly = 1;
241
242 case MMC_TIMING_UHS_SDR50:
243 if (smpl_phase >= ENABLE_SHIFT_MIN_SMPL &&
244 smpl_phase <= ENABLE_SHIFT_MAX_SMPL)
245 enable_shift = 1;
246 break;
247 }
248
249 mci_writel(host, GPIO, 0x0);
250 usleep_range(5, 10);
251
252 reg_value = FIELD_PREP(UHS_REG_EXT_SAMPLE_PHASE_MASK, smpl_phase) |
253 FIELD_PREP(UHS_REG_EXT_SAMPLE_DLY_MASK, smpl_dly) |
254 FIELD_PREP(UHS_REG_EXT_SAMPLE_DRVPHASE_MASK, drv_phase);
255 mci_writel(host, UHS_REG_EXT, reg_value);
256
257 mci_writel(host, ENABLE_SHIFT, enable_shift);
258
259 reg_value = FIELD_PREP(GPIO_CLK_DIV_MASK, GENCLK_DIV) |
260 FIELD_PREP(GPIO_USE_SAMPLE_DLY_MASK, use_smpl_dly);
261 mci_writel(host, GPIO, (unsigned int)reg_value | GPIO_CLK_ENABLE);
262
263
264 usleep_range(1000, 2000);
265}
266
267static int dw_mci_hi3660_init(struct dw_mci *host)
268{
269 mci_writel(host, CDTHRCTL, SDMMC_SET_THLD(SDCARD_RD_THRESHOLD,
270 SDMMC_CARD_RD_THR_EN));
271
272 dw_mci_hs_set_timing(host, MMC_TIMING_LEGACY, -1);
273 host->bus_hz /= (GENCLK_DIV + 1);
274
275 return 0;
276}
277
278static int dw_mci_set_sel18(struct dw_mci *host, bool set)
279{
280 int ret;
281 unsigned int val;
282 struct k3_priv *priv;
283
284 priv = host->priv;
285
286 val = set ? SDCARD_IO_SEL18 : 0;
287 ret = regmap_update_bits(priv->reg, SOC_SCTRL_SCPERCTRL5,
288 SDCARD_IO_SEL18, val);
289 if (ret) {
290 dev_err(host->dev, "sel18 %u error\n", val);
291 return ret;
292 }
293
294 return 0;
295}
296
297static void dw_mci_hi3660_set_ios(struct dw_mci *host, struct mmc_ios *ios)
298{
299 int ret;
300 unsigned long wanted;
301 unsigned long actual;
302 struct k3_priv *priv = host->priv;
303
304 if (!ios->clock || ios->clock == priv->cur_speed)
305 return;
306
307 wanted = ios->clock * (GENCLK_DIV + 1);
308 ret = clk_set_rate(host->ciu_clk, wanted);
309 if (ret) {
310 dev_err(host->dev, "failed to set rate %luHz\n", wanted);
311 return;
312 }
313 actual = clk_get_rate(host->ciu_clk);
314
315 dw_mci_hs_set_timing(host, ios->timing, -1);
316 host->bus_hz = actual / (GENCLK_DIV + 1);
317 host->current_speed = 0;
318 priv->cur_speed = host->bus_hz;
319}
320
321static int dw_mci_get_best_clksmpl(unsigned int sample_flag)
322{
323 int i;
324 int interval;
325 unsigned int v;
326 unsigned int len;
327 unsigned int range_start = 0;
328 unsigned int range_length = 0;
329 unsigned int middle_range = 0;
330
331 if (!sample_flag)
332 return -EIO;
333
334 if (~sample_flag == 0)
335 return 0;
336
337 i = ffs(sample_flag) - 1;
338
339
340
341
342
343
344 while (i < 32) {
345 v = ror32(sample_flag, i);
346 len = ffs(~v) - 1;
347
348 if (len > range_length) {
349 range_length = len;
350 range_start = i;
351 }
352
353 interval = ffs(v >> len) - 1;
354 if (interval < 0)
355 break;
356
357 i += len + interval;
358 }
359
360 middle_range = range_start + range_length / 2;
361 if (middle_range >= 32)
362 middle_range %= 32;
363
364 return middle_range;
365}
366
367static int dw_mci_hi3660_execute_tuning(struct dw_mci_slot *slot, u32 opcode)
368{
369 int i = 0;
370 struct dw_mci *host = slot->host;
371 struct mmc_host *mmc = slot->mmc;
372 int smpl_phase = 0;
373 u32 tuning_sample_flag = 0;
374 int best_clksmpl = 0;
375
376 for (i = 0; i < NUM_PHASES; ++i, ++smpl_phase) {
377 smpl_phase %= 32;
378
379 mci_writel(host, TMOUT, ~0);
380 dw_mci_hs_set_timing(host, mmc->ios.timing, smpl_phase);
381
382 if (!mmc_send_tuning(mmc, opcode, NULL))
383 tuning_sample_flag |= (1 << smpl_phase);
384 else
385 tuning_sample_flag &= ~(1 << smpl_phase);
386 }
387
388 best_clksmpl = dw_mci_get_best_clksmpl(tuning_sample_flag);
389 if (best_clksmpl < 0) {
390 dev_err(host->dev, "All phases bad!\n");
391 return -EIO;
392 }
393
394 dw_mci_hs_set_timing(host, mmc->ios.timing, best_clksmpl);
395
396 dev_info(host->dev, "tuning ok best_clksmpl %u tuning_sample_flag %x\n",
397 best_clksmpl, tuning_sample_flag);
398 return 0;
399}
400
401static int dw_mci_hi3660_switch_voltage(struct mmc_host *mmc,
402 struct mmc_ios *ios)
403{
404 int ret = 0;
405 struct dw_mci_slot *slot = mmc_priv(mmc);
406 struct k3_priv *priv;
407 struct dw_mci *host;
408
409 host = slot->host;
410 priv = host->priv;
411
412 if (!priv || !priv->reg)
413 return 0;
414
415 if (priv->ctrl_id == DWMMC_SDIO_ID)
416 return 0;
417
418 if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330)
419 ret = dw_mci_set_sel18(host, 0);
420 else if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180)
421 ret = dw_mci_set_sel18(host, 1);
422 if (ret)
423 return ret;
424
425 if (!IS_ERR(mmc->supply.vqmmc)) {
426 ret = mmc_regulator_set_vqmmc(mmc, ios);
427 if (ret) {
428 dev_err(host->dev, "Regulator set error %d\n", ret);
429 return ret;
430 }
431 }
432
433 return 0;
434}
435
436static const struct dw_mci_drv_data hi3660_data = {
437 .init = dw_mci_hi3660_init,
438 .set_ios = dw_mci_hi3660_set_ios,
439 .parse_dt = dw_mci_hi6220_parse_dt,
440 .execute_tuning = dw_mci_hi3660_execute_tuning,
441 .switch_voltage = dw_mci_hi3660_switch_voltage,
442};
443
444static const struct of_device_id dw_mci_k3_match[] = {
445 { .compatible = "hisilicon,hi3660-dw-mshc", .data = &hi3660_data, },
446 { .compatible = "hisilicon,hi4511-dw-mshc", .data = &k3_drv_data, },
447 { .compatible = "hisilicon,hi6220-dw-mshc", .data = &hi6220_data, },
448 {},
449};
450MODULE_DEVICE_TABLE(of, dw_mci_k3_match);
451
452static int dw_mci_k3_probe(struct platform_device *pdev)
453{
454 const struct dw_mci_drv_data *drv_data;
455 const struct of_device_id *match;
456
457 match = of_match_node(dw_mci_k3_match, pdev->dev.of_node);
458 drv_data = match->data;
459
460 return dw_mci_pltfm_register(pdev, drv_data);
461}
462
463static const struct dev_pm_ops dw_mci_k3_dev_pm_ops = {
464 SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
465 pm_runtime_force_resume)
466 SET_RUNTIME_PM_OPS(dw_mci_runtime_suspend,
467 dw_mci_runtime_resume,
468 NULL)
469};
470
471static struct platform_driver dw_mci_k3_pltfm_driver = {
472 .probe = dw_mci_k3_probe,
473 .remove = dw_mci_pltfm_remove,
474 .driver = {
475 .name = "dwmmc_k3",
476 .of_match_table = dw_mci_k3_match,
477 .pm = &dw_mci_k3_dev_pm_ops,
478 },
479};
480
481module_platform_driver(dw_mci_k3_pltfm_driver);
482
483MODULE_DESCRIPTION("K3 Specific DW-MSHC Driver Extension");
484MODULE_LICENSE("GPL v2");
485MODULE_ALIAS("platform:dwmmc_k3");
486
