LXR linux/drivers/net/ethernet/8390/zorro8390.c

   1/*
   2 *  Amiga Linux/m68k and Linux/PPC Zorro NS8390 Ethernet Driver
   3 *
   4 *  (C) Copyright 1998-2000 by some Elitist 680x0 Users(TM)
   5 *
   6 *  ---------------------------------------------------------------------------
   7 *
   8 *  This program is based on all the other NE2000 drivers for Linux
   9 *
  10 *  ---------------------------------------------------------------------------
  11 *
  12 *  This file is subject to the terms and conditions of the GNU General Public
  13 *  License.  See the file COPYING in the main directory of the Linux
  14 *  distribution for more details.
  15 *
  16 *  ---------------------------------------------------------------------------
  17 *
  18 *  The Ariadne II and X-Surf are Zorro-II boards containing Realtek RTL8019AS
  19 *  Ethernet Controllers.
  20 */
  21
  22#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  23
  24#include <linux/module.h>
  25#include <linux/kernel.h>
  26#include <linux/errno.h>
  27#include <linux/init.h>
  28#include <linux/delay.h>
  29#include <linux/netdevice.h>
  30#include <linux/etherdevice.h>
  31#include <linux/zorro.h>
  32#include <linux/jiffies.h>
  33
  34#include <asm/irq.h>
  35#include <asm/amigaints.h>
  36#include <asm/amigahw.h>
  37
  38#define EI_SHIFT(x)             (ei_local->reg_offset[x])
  39#define ei_inb(port)            in_8(port)
  40#define ei_outb(val, port)      out_8(port, val)
  41#define ei_inb_p(port)          in_8(port)
  42#define ei_outb_p(val, port)    out_8(port, val)
  43
  44static const char version[] =
  45        "8390.c:v1.10cvs 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
  46
  47#include "lib8390.c"
  48
  49#define DRV_NAME        "zorro8390"
  50
  51#define NE_BASE         (dev->base_addr)
  52#define NE_CMD          (0x00 * 2)
  53#define NE_DATAPORT     (0x10 * 2)      /* NatSemi-defined port window offset */
  54#define NE_RESET        (0x1f * 2)      /* Issue a read to reset,
  55                                         * a write to clear. */
  56#define NE_IO_EXTENT    (0x20 * 2)
  57
  58#define NE_EN0_ISR      (0x07 * 2)
  59#define NE_EN0_DCFG     (0x0e * 2)
  60
  61#define NE_EN0_RSARLO   (0x08 * 2)
  62#define NE_EN0_RSARHI   (0x09 * 2)
  63#define NE_EN0_RCNTLO   (0x0a * 2)
  64#define NE_EN0_RXCR     (0x0c * 2)
  65#define NE_EN0_TXCR     (0x0d * 2)
  66#define NE_EN0_RCNTHI   (0x0b * 2)
  67#define NE_EN0_IMR      (0x0f * 2)
  68
  69#define NESM_START_PG   0x40    /* First page of TX buffer */
  70#define NESM_STOP_PG    0x80    /* Last page +1 of RX ring */
  71
  72#define WORDSWAP(a)     ((((a) >> 8) & 0xff) | ((a) << 8))
  73
  74static struct card_info {
  75        zorro_id id;
  76        const char *name;
  77        unsigned int offset;
  78} cards[] = {
  79        { ZORRO_PROD_VILLAGE_TRONIC_ARIADNE2, "Ariadne II", 0x0600 },
  80        { ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF, "X-Surf", 0x8600 },
  81};
  82
  83/* Hard reset the card.  This used to pause for the same period that a
  84 * 8390 reset command required, but that shouldn't be necessary.
  85 */
  86static void zorro8390_reset_8390(struct net_device *dev)
  87{
  88        unsigned long reset_start_time = jiffies;
  89        struct ei_device *ei_local = netdev_priv(dev);
  90
  91        netif_dbg(ei_local, hw, dev, "resetting - t=%ld...\n", jiffies);
  92
  93        z_writeb(z_readb(NE_BASE + NE_RESET), NE_BASE + NE_RESET);
  94
  95        ei_status.txing = 0;
  96        ei_status.dmaing = 0;
  97
  98        /* This check _should_not_ be necessary, omit eventually. */
  99        while ((z_readb(NE_BASE + NE_EN0_ISR) & ENISR_RESET) == 0)
 100                if (time_after(jiffies, reset_start_time + 2 * HZ / 100)) {
 101                        netdev_warn(dev, "%s: did not complete\n", __func__);
 102                        break;
 103                }
 104        z_writeb(ENISR_RESET, NE_BASE + NE_EN0_ISR);    /* Ack intr */
 105}
 106
 107/* Grab the 8390 specific header. Similar to the block_input routine, but
 108 * we don't need to be concerned with ring wrap as the header will be at
 109 * the start of a page, so we optimize accordingly.
 110 */
 111static void zorro8390_get_8390_hdr(struct net_device *dev,
 112                                   struct e8390_pkt_hdr *hdr, int ring_page)
 113{
 114        int nic_base = dev->base_addr;
 115        int cnt;
 116        short *ptrs;
 117
 118        /* This *shouldn't* happen.
 119         * If it does, it's the last thing you'll see
 120         */
 121        if (ei_status.dmaing) {
 122                netdev_warn(dev,
 123                            "%s: DMAing conflict [DMAstat:%d][irqlock:%d]\n",
 124                            __func__, ei_status.dmaing, ei_status.irqlock);
 125                return;
 126        }
 127
 128        ei_status.dmaing |= 0x01;
 129        z_writeb(E8390_NODMA + E8390_PAGE0 + E8390_START, nic_base + NE_CMD);
 130        z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR);
 131        z_writeb(sizeof(struct e8390_pkt_hdr), nic_base + NE_EN0_RCNTLO);
 132        z_writeb(0, nic_base + NE_EN0_RCNTHI);
 133        z_writeb(0, nic_base + NE_EN0_RSARLO);          /* On page boundary */
 134        z_writeb(ring_page, nic_base + NE_EN0_RSARHI);
 135        z_writeb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
 136
 137        ptrs = (short *)hdr;
 138        for (cnt = 0; cnt < sizeof(struct e8390_pkt_hdr) >> 1; cnt++)
 139                *ptrs++ = z_readw(NE_BASE + NE_DATAPORT);
 140
 141        z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR);     /* Ack intr */
 142
 143        hdr->count = WORDSWAP(hdr->count);
 144
 145        ei_status.dmaing &= ~0x01;
 146}
 147
 148/* Block input and output, similar to the Crynwr packet driver.
 149 * If you are porting to a new ethercard, look at the packet driver source
 150 * for hints. The NEx000 doesn't share the on-board packet memory --
 151 * you have to put the packet out through the "remote DMA" dataport
 152 * using z_writeb.
 153 */
 154static void zorro8390_block_input(struct net_device *dev, int count,
 155                                  struct sk_buff *skb, int ring_offset)
 156{
 157        int nic_base = dev->base_addr;
 158        char *buf = skb->data;
 159        short *ptrs;
 160        int cnt;
 161
 162        /* This *shouldn't* happen.
 163         * If it does, it's the last thing you'll see
 164         */
 165        if (ei_status.dmaing) {
 166                netdev_err(dev, "%s: DMAing conflict [DMAstat:%d][irqlock:%d]\n",
 167                           __func__, ei_status.dmaing, ei_status.irqlock);
 168                return;
 169        }
 170        ei_status.dmaing |= 0x01;
 171        z_writeb(E8390_NODMA + E8390_PAGE0 + E8390_START, nic_base + NE_CMD);
 172        z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR);
 173        z_writeb(count & 0xff, nic_base + NE_EN0_RCNTLO);
 174        z_writeb(count >> 8, nic_base + NE_EN0_RCNTHI);
 175        z_writeb(ring_offset & 0xff, nic_base + NE_EN0_RSARLO);
 176        z_writeb(ring_offset >> 8, nic_base + NE_EN0_RSARHI);
 177        z_writeb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
 178        ptrs = (short *)buf;
 179        for (cnt = 0; cnt < count >> 1; cnt++)
 180                *ptrs++ = z_readw(NE_BASE + NE_DATAPORT);
 181        if (count & 0x01)
 182                buf[count - 1] = z_readb(NE_BASE + NE_DATAPORT);
 183
 184        z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR);     /* Ack intr */
 185        ei_status.dmaing &= ~0x01;
 186}
 187
 188static void zorro8390_block_output(struct net_device *dev, int count,
 189                                   const unsigned char *buf,
 190                                   const int start_page)
 191{
 192        int nic_base = NE_BASE;
 193        unsigned long dma_start;
 194        short *ptrs;
 195        int cnt;
 196
 197        /* Round the count up for word writes.  Do we need to do this?
 198         * What effect will an odd byte count have on the 8390?
 199         * I should check someday.
 200         */
 201        if (count & 0x01)
 202                count++;
 203
 204        /* This *shouldn't* happen.
 205         * If it does, it's the last thing you'll see
 206         */
 207        if (ei_status.dmaing) {
 208                netdev_err(dev, "%s: DMAing conflict [DMAstat:%d][irqlock:%d]\n",
 209                           __func__, ei_status.dmaing, ei_status.irqlock);
 210                return;
 211        }
 212        ei_status.dmaing |= 0x01;
 213        /* We should already be in page 0, but to be safe... */
 214        z_writeb(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base + NE_CMD);
 215
 216        z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR);
 217
 218        /* Now the normal output. */
 219        z_writeb(count & 0xff, nic_base + NE_EN0_RCNTLO);
 220        z_writeb(count >> 8,   nic_base + NE_EN0_RCNTHI);
 221        z_writeb(0x00, nic_base + NE_EN0_RSARLO);
 222        z_writeb(start_page, nic_base + NE_EN0_RSARHI);
 223
 224        z_writeb(E8390_RWRITE + E8390_START, nic_base + NE_CMD);
 225        ptrs = (short *)buf;
 226        for (cnt = 0; cnt < count >> 1; cnt++)
 227                z_writew(*ptrs++, NE_BASE + NE_DATAPORT);
 228
 229        dma_start = jiffies;
 230
 231        while ((z_readb(NE_BASE + NE_EN0_ISR) & ENISR_RDC) == 0)
 232                if (time_after(jiffies, dma_start + 2 * HZ / 100)) {
 233                                        /* 20ms */
 234                        netdev_warn(dev, "timeout waiting for Tx RDC\n");
 235                        zorro8390_reset_8390(dev);
 236                        __NS8390_init(dev, 1);
 237                        break;
 238                }
 239
 240        z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR);     /* Ack intr */
 241        ei_status.dmaing &= ~0x01;
 242}
 243
 244static int zorro8390_open(struct net_device *dev)
 245{
 246        __ei_open(dev);
 247        return 0;
 248}
 249
 250static int zorro8390_close(struct net_device *dev)
 251{
 252        struct ei_device *ei_local = netdev_priv(dev);
 253
 254        netif_dbg(ei_local, ifdown, dev, "Shutting down ethercard\n");
 255        __ei_close(dev);
 256        return 0;
 257}
 258
 259static void zorro8390_remove_one(struct zorro_dev *z)
 260{
 261        struct net_device *dev = zorro_get_drvdata(z);
 262
 263        unregister_netdev(dev);
 264        free_irq(IRQ_AMIGA_PORTS, dev);
 265        release_mem_region(ZTWO_PADDR(dev->base_addr), NE_IO_EXTENT * 2);
 266        free_netdev(dev);
 267}
 268
 269static struct zorro_device_id zorro8390_zorro_tbl[] = {
 270        { ZORRO_PROD_VILLAGE_TRONIC_ARIADNE2, },
 271        { ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF, },
 272        { 0 }
 273};
 274MODULE_DEVICE_TABLE(zorro, zorro8390_zorro_tbl);
 275
 276static const struct net_device_ops zorro8390_netdev_ops = {
 277        .ndo_open               = zorro8390_open,
 278        .ndo_stop               = zorro8390_close,
 279        .ndo_start_xmit         = __ei_start_xmit,
 280        .ndo_tx_timeout         = __ei_tx_timeout,
 281        .ndo_get_stats          = __ei_get_stats,
 282        .ndo_set_rx_mode        = __ei_set_multicast_list,
 283        .ndo_validate_addr      = eth_validate_addr,
 284        .ndo_set_mac_address    = eth_mac_addr,
 285#ifdef CONFIG_NET_POLL_CONTROLLER
 286        .ndo_poll_controller    = __ei_poll,
 287#endif
 288};
 289
 290static int zorro8390_init(struct net_device *dev, unsigned long board,
 291                          const char *name, void __iomem *ioaddr)
 292{
 293        int i;
 294        int err;
 295        unsigned char SA_prom[32];
 296        int start_page, stop_page;
 297        static u32 zorro8390_offsets[16] = {
 298                0x00, 0x02, 0x04, 0x06, 0x08, 0x0a, 0x0c, 0x0e,
 299                0x10, 0x12, 0x14, 0x16, 0x18, 0x1a, 0x1c, 0x1e,
 300        };
 301
 302        /* Reset card. Who knows what dain-bramaged state it was left in. */
 303        {
 304                unsigned long reset_start_time = jiffies;
 305
 306                z_writeb(z_readb(ioaddr + NE_RESET), ioaddr + NE_RESET);
 307
 308                while ((z_readb(ioaddr + NE_EN0_ISR) & ENISR_RESET) == 0)
 309                        if (time_after(jiffies,
 310                                       reset_start_time + 2 * HZ / 100)) {
 311                                netdev_warn(dev, "not found (no reset ack)\n");
 312                                return -ENODEV;
 313                        }
 314
 315                z_writeb(0xff, ioaddr + NE_EN0_ISR);    /* Ack all intr. */
 316        }
 317
 318        /* Read the 16 bytes of station address PROM.
 319         * We must first initialize registers,
 320         * similar to NS8390_init(eifdev, 0).
 321         * We can't reliably read the SAPROM address without this.
 322         * (I learned the hard way!).
 323         */
 324        {
 325                static const struct {
 326                        u32 value;
 327                        u32 offset;
 328                } program_seq[] = {
 329                        {E8390_NODMA + E8390_PAGE0 + E8390_STOP, NE_CMD},
 330                                                /* Select page 0 */
 331                        {0x48,  NE_EN0_DCFG},   /* 0x48: Set byte-wide access */
 332                        {0x00,  NE_EN0_RCNTLO}, /* Clear the count regs */
 333                        {0x00,  NE_EN0_RCNTHI},
 334                        {0x00,  NE_EN0_IMR},    /* Mask completion irq */
 335                        {0xFF,  NE_EN0_ISR},
 336                        {E8390_RXOFF, NE_EN0_RXCR}, /* 0x20 Set to monitor */
 337                        {E8390_TXOFF, NE_EN0_TXCR}, /* 0x02 and loopback mode */
 338                        {32,    NE_EN0_RCNTLO},
 339                        {0x00,  NE_EN0_RCNTHI},
 340                        {0x00,  NE_EN0_RSARLO}, /* DMA starting at 0x0000 */
 341                        {0x00,  NE_EN0_RSARHI},
 342                        {E8390_RREAD + E8390_START, NE_CMD},
 343                };
 344                for (i = 0; i < ARRAY_SIZE(program_seq); i++)
 345                        z_writeb(program_seq[i].value,
 346                                 ioaddr + program_seq[i].offset);
 347        }
 348        for (i = 0; i < 16; i++) {
 349                SA_prom[i] = z_readb(ioaddr + NE_DATAPORT);
 350                (void)z_readb(ioaddr + NE_DATAPORT);
 351        }
 352
 353        /* We must set the 8390 for word mode. */
 354        z_writeb(0x49, ioaddr + NE_EN0_DCFG);
 355        start_page = NESM_START_PG;
 356        stop_page = NESM_STOP_PG;
 357
 358        dev->base_addr = (unsigned long)ioaddr;
 359        dev->irq = IRQ_AMIGA_PORTS;
 360
 361        /* Install the Interrupt handler */
 362        i = request_irq(IRQ_AMIGA_PORTS, __ei_interrupt,
 363                        IRQF_SHARED, DRV_NAME, dev);
 364        if (i)
 365                return i;
 366
 367        for (i = 0; i < ETH_ALEN; i++)
 368                dev->dev_addr[i] = SA_prom[i];
 369
 370        pr_debug("Found ethernet address: %pM\n", dev->dev_addr);
 371
 372        ei_status.name = name;
 373        ei_status.tx_start_page = start_page;
 374        ei_status.stop_page = stop_page;
 375        ei_status.word16 = 1;
 376
 377        ei_status.rx_start_page = start_page + TX_PAGES;
 378
 379        ei_status.reset_8390 = zorro8390_reset_8390;
 380        ei_status.block_input = zorro8390_block_input;
 381        ei_status.block_output = zorro8390_block_output;
 382        ei_status.get_8390_hdr = zorro8390_get_8390_hdr;
 383        ei_status.reg_offset = zorro8390_offsets;
 384
 385        dev->netdev_ops = &zorro8390_netdev_ops;
 386        __NS8390_init(dev, 0);
 387
 388        err = register_netdev(dev);
 389        if (err) {
 390                free_irq(IRQ_AMIGA_PORTS, dev);
 391                return err;
 392        }
 393
 394        netdev_info(dev, "%s at 0x%08lx, Ethernet Address %pM\n",
 395                    name, board, dev->dev_addr);
 396
 397        return 0;
 398}
 399
 400static int zorro8390_init_one(struct zorro_dev *z,
 401                              const struct zorro_device_id *ent)
 402{
 403        struct net_device *dev;
 404        unsigned long board, ioaddr;
 405        int err, i;
 406
 407        for (i = ARRAY_SIZE(cards) - 1; i >= 0; i--)
 408                if (z->id == cards[i].id)
 409                        break;
 410        if (i < 0)
 411                return -ENODEV;
 412
 413        board = z->resource.start;
 414        ioaddr = board + cards[i].offset;
 415        dev = ____alloc_ei_netdev(0);
 416        if (!dev)
 417                return -ENOMEM;
 418        if (!request_mem_region(ioaddr, NE_IO_EXTENT * 2, DRV_NAME)) {
 419                free_netdev(dev);
 420                return -EBUSY;
 421        }
 422        err = zorro8390_init(dev, board, cards[i].name, ZTWO_VADDR(ioaddr));
 423        if (err) {
 424                release_mem_region(ioaddr, NE_IO_EXTENT * 2);
 425                free_netdev(dev);
 426                return err;
 427        }
 428        zorro_set_drvdata(z, dev);
 429        return 0;
 430}
 431
 432static struct zorro_driver zorro8390_driver = {
 433        .name           = "zorro8390",
 434        .id_table       = zorro8390_zorro_tbl,
 435        .probe          = zorro8390_init_one,
 436        .remove         = zorro8390_remove_one,
 437};
 438
 439static int __init zorro8390_init_module(void)
 440{
 441        return zorro_register_driver(&zorro8390_driver);
 442}
 443
 444static void __exit zorro8390_cleanup_module(void)
 445{
 446        zorro_unregister_driver(&zorro8390_driver);
 447}
 448
 449module_init(zorro8390_init_module);
 450module_exit(zorro8390_cleanup_module);
 451
 452MODULE_LICENSE("GPL");
 453