linux/drivers/net/ethernet/myricom/myri10ge/myri10ge.c
<<
>>
Prefs
   1/*************************************************************************
   2 * myri10ge.c: Myricom Myri-10G Ethernet driver.
   3 *
   4 * Copyright (C) 2005 - 2011 Myricom, Inc.
   5 * All rights reserved.
   6 *
   7 * Redistribution and use in source and binary forms, with or without
   8 * modification, are permitted provided that the following conditions
   9 * are met:
  10 * 1. Redistributions of source code must retain the above copyright
  11 *    notice, this list of conditions and the following disclaimer.
  12 * 2. Redistributions in binary form must reproduce the above copyright
  13 *    notice, this list of conditions and the following disclaimer in the
  14 *    documentation and/or other materials provided with the distribution.
  15 * 3. Neither the name of Myricom, Inc. nor the names of its contributors
  16 *    may be used to endorse or promote products derived from this software
  17 *    without specific prior written permission.
  18 *
  19 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  20 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  22 * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
  23 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  29 * POSSIBILITY OF SUCH DAMAGE.
  30 *
  31 *
  32 * If the eeprom on your board is not recent enough, you will need to get a
  33 * newer firmware image at:
  34 *   http://www.myri.com/scs/download-Myri10GE.html
  35 *
  36 * Contact Information:
  37 *   <help@myri.com>
  38 *   Myricom, Inc., 325N Santa Anita Avenue, Arcadia, CA 91006
  39 *************************************************************************/
  40
  41#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  42
  43#include <linux/tcp.h>
  44#include <linux/netdevice.h>
  45#include <linux/skbuff.h>
  46#include <linux/string.h>
  47#include <linux/module.h>
  48#include <linux/pci.h>
  49#include <linux/dma-mapping.h>
  50#include <linux/etherdevice.h>
  51#include <linux/if_ether.h>
  52#include <linux/if_vlan.h>
  53#include <linux/dca.h>
  54#include <linux/ip.h>
  55#include <linux/inet.h>
  56#include <linux/in.h>
  57#include <linux/ethtool.h>
  58#include <linux/firmware.h>
  59#include <linux/delay.h>
  60#include <linux/timer.h>
  61#include <linux/vmalloc.h>
  62#include <linux/crc32.h>
  63#include <linux/moduleparam.h>
  64#include <linux/io.h>
  65#include <linux/log2.h>
  66#include <linux/slab.h>
  67#include <linux/prefetch.h>
  68#include <net/checksum.h>
  69#include <net/ip.h>
  70#include <net/tcp.h>
  71#include <asm/byteorder.h>
  72#include <asm/processor.h>
  73
  74#include "myri10ge_mcp.h"
  75#include "myri10ge_mcp_gen_header.h"
  76
  77#define MYRI10GE_VERSION_STR "1.5.3-1.534"
  78
  79MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
  80MODULE_AUTHOR("Maintainer: help@myri.com");
  81MODULE_VERSION(MYRI10GE_VERSION_STR);
  82MODULE_LICENSE("Dual BSD/GPL");
  83
  84#define MYRI10GE_MAX_ETHER_MTU 9014
  85
  86#define MYRI10GE_ETH_STOPPED 0
  87#define MYRI10GE_ETH_STOPPING 1
  88#define MYRI10GE_ETH_STARTING 2
  89#define MYRI10GE_ETH_RUNNING 3
  90#define MYRI10GE_ETH_OPEN_FAILED 4
  91
  92#define MYRI10GE_EEPROM_STRINGS_SIZE 256
  93#define MYRI10GE_MAX_SEND_DESC_TSO ((65536 / 2048) * 2)
  94
  95#define MYRI10GE_NO_CONFIRM_DATA htonl(0xffffffff)
  96#define MYRI10GE_NO_RESPONSE_RESULT 0xffffffff
  97
  98#define MYRI10GE_ALLOC_ORDER 0
  99#define MYRI10GE_ALLOC_SIZE ((1 << MYRI10GE_ALLOC_ORDER) * PAGE_SIZE)
 100#define MYRI10GE_MAX_FRAGS_PER_FRAME (MYRI10GE_MAX_ETHER_MTU/MYRI10GE_ALLOC_SIZE + 1)
 101
 102#define MYRI10GE_MAX_SLICES 32
 103
 104struct myri10ge_rx_buffer_state {
 105        struct page *page;
 106        int page_offset;
 107        DEFINE_DMA_UNMAP_ADDR(bus);
 108        DEFINE_DMA_UNMAP_LEN(len);
 109};
 110
 111struct myri10ge_tx_buffer_state {
 112        struct sk_buff *skb;
 113        int last;
 114        DEFINE_DMA_UNMAP_ADDR(bus);
 115        DEFINE_DMA_UNMAP_LEN(len);
 116};
 117
 118struct myri10ge_cmd {
 119        u32 data0;
 120        u32 data1;
 121        u32 data2;
 122};
 123
 124struct myri10ge_rx_buf {
 125        struct mcp_kreq_ether_recv __iomem *lanai;      /* lanai ptr for recv ring */
 126        struct mcp_kreq_ether_recv *shadow;     /* host shadow of recv ring */
 127        struct myri10ge_rx_buffer_state *info;
 128        struct page *page;
 129        dma_addr_t bus;
 130        int page_offset;
 131        int cnt;
 132        int fill_cnt;
 133        int alloc_fail;
 134        int mask;               /* number of rx slots -1 */
 135        int watchdog_needed;
 136};
 137
 138struct myri10ge_tx_buf {
 139        struct mcp_kreq_ether_send __iomem *lanai;      /* lanai ptr for sendq */
 140        __be32 __iomem *send_go;        /* "go" doorbell ptr */
 141        __be32 __iomem *send_stop;      /* "stop" doorbell ptr */
 142        struct mcp_kreq_ether_send *req_list;   /* host shadow of sendq */
 143        char *req_bytes;
 144        struct myri10ge_tx_buffer_state *info;
 145        int mask;               /* number of transmit slots -1  */
 146        int req ____cacheline_aligned;  /* transmit slots submitted     */
 147        int pkt_start;          /* packets started */
 148        int stop_queue;
 149        int linearized;
 150        int done ____cacheline_aligned; /* transmit slots completed     */
 151        int pkt_done;           /* packets completed */
 152        int wake_queue;
 153        int queue_active;
 154};
 155
 156struct myri10ge_rx_done {
 157        struct mcp_slot *entry;
 158        dma_addr_t bus;
 159        int cnt;
 160        int idx;
 161};
 162
 163struct myri10ge_slice_netstats {
 164        unsigned long rx_packets;
 165        unsigned long tx_packets;
 166        unsigned long rx_bytes;
 167        unsigned long tx_bytes;
 168        unsigned long rx_dropped;
 169        unsigned long tx_dropped;
 170};
 171
 172struct myri10ge_slice_state {
 173        struct myri10ge_tx_buf tx;      /* transmit ring        */
 174        struct myri10ge_rx_buf rx_small;
 175        struct myri10ge_rx_buf rx_big;
 176        struct myri10ge_rx_done rx_done;
 177        struct net_device *dev;
 178        struct napi_struct napi;
 179        struct myri10ge_priv *mgp;
 180        struct myri10ge_slice_netstats stats;
 181        __be32 __iomem *irq_claim;
 182        struct mcp_irq_data *fw_stats;
 183        dma_addr_t fw_stats_bus;
 184        int watchdog_tx_done;
 185        int watchdog_tx_req;
 186        int watchdog_rx_done;
 187        int stuck;
 188#ifdef CONFIG_MYRI10GE_DCA
 189        int cached_dca_tag;
 190        int cpu;
 191        __be32 __iomem *dca_tag;
 192#endif
 193        char irq_desc[32];
 194};
 195
 196struct myri10ge_priv {
 197        struct myri10ge_slice_state *ss;
 198        int tx_boundary;        /* boundary transmits cannot cross */
 199        int num_slices;
 200        int running;            /* running?             */
 201        int small_bytes;
 202        int big_bytes;
 203        int max_intr_slots;
 204        struct net_device *dev;
 205        u8 __iomem *sram;
 206        int sram_size;
 207        unsigned long board_span;
 208        unsigned long iomem_base;
 209        __be32 __iomem *irq_deassert;
 210        char *mac_addr_string;
 211        struct mcp_cmd_response *cmd;
 212        dma_addr_t cmd_bus;
 213        struct pci_dev *pdev;
 214        int msi_enabled;
 215        int msix_enabled;
 216        struct msix_entry *msix_vectors;
 217#ifdef CONFIG_MYRI10GE_DCA
 218        int dca_enabled;
 219        int relaxed_order;
 220#endif
 221        u32 link_state;
 222        unsigned int rdma_tags_available;
 223        int intr_coal_delay;
 224        __be32 __iomem *intr_coal_delay_ptr;
 225        int wc_cookie;
 226        int down_cnt;
 227        wait_queue_head_t down_wq;
 228        struct work_struct watchdog_work;
 229        struct timer_list watchdog_timer;
 230        int watchdog_resets;
 231        int watchdog_pause;
 232        int pause;
 233        bool fw_name_allocated;
 234        char *fw_name;
 235        char eeprom_strings[MYRI10GE_EEPROM_STRINGS_SIZE];
 236        char *product_code_string;
 237        char fw_version[128];
 238        int fw_ver_major;
 239        int fw_ver_minor;
 240        int fw_ver_tiny;
 241        int adopted_rx_filter_bug;
 242        u8 mac_addr[ETH_ALEN];          /* eeprom mac address */
 243        unsigned long serial_number;
 244        int vendor_specific_offset;
 245        int fw_multicast_support;
 246        u32 features;
 247        u32 max_tso6;
 248        u32 read_dma;
 249        u32 write_dma;
 250        u32 read_write_dma;
 251        u32 link_changes;
 252        u32 msg_enable;
 253        unsigned int board_number;
 254        int rebooted;
 255};
 256
 257static char *myri10ge_fw_unaligned = "myri10ge_ethp_z8e.dat";
 258static char *myri10ge_fw_aligned = "myri10ge_eth_z8e.dat";
 259static char *myri10ge_fw_rss_unaligned = "myri10ge_rss_ethp_z8e.dat";
 260static char *myri10ge_fw_rss_aligned = "myri10ge_rss_eth_z8e.dat";
 261MODULE_FIRMWARE("myri10ge_ethp_z8e.dat");
 262MODULE_FIRMWARE("myri10ge_eth_z8e.dat");
 263MODULE_FIRMWARE("myri10ge_rss_ethp_z8e.dat");
 264MODULE_FIRMWARE("myri10ge_rss_eth_z8e.dat");
 265
 266/* Careful: must be accessed under kernel_param_lock() */
 267static char *myri10ge_fw_name = NULL;
 268module_param(myri10ge_fw_name, charp, 0644);
 269MODULE_PARM_DESC(myri10ge_fw_name, "Firmware image name");
 270
 271#define MYRI10GE_MAX_BOARDS 8
 272static char *myri10ge_fw_names[MYRI10GE_MAX_BOARDS] =
 273    {[0 ... (MYRI10GE_MAX_BOARDS - 1)] = NULL };
 274module_param_array_named(myri10ge_fw_names, myri10ge_fw_names, charp, NULL,
 275                         0444);
 276MODULE_PARM_DESC(myri10ge_fw_names, "Firmware image names per board");
 277
 278static int myri10ge_ecrc_enable = 1;
 279module_param(myri10ge_ecrc_enable, int, 0444);
 280MODULE_PARM_DESC(myri10ge_ecrc_enable, "Enable Extended CRC on PCI-E");
 281
 282static int myri10ge_small_bytes = -1;   /* -1 == auto */
 283module_param(myri10ge_small_bytes, int, 0644);
 284MODULE_PARM_DESC(myri10ge_small_bytes, "Threshold of small packets");
 285
 286static int myri10ge_msi = 1;    /* enable msi by default */
 287module_param(myri10ge_msi, int, 0644);
 288MODULE_PARM_DESC(myri10ge_msi, "Enable Message Signalled Interrupts");
 289
 290static int myri10ge_intr_coal_delay = 75;
 291module_param(myri10ge_intr_coal_delay, int, 0444);
 292MODULE_PARM_DESC(myri10ge_intr_coal_delay, "Interrupt coalescing delay");
 293
 294static int myri10ge_flow_control = 1;
 295module_param(myri10ge_flow_control, int, 0444);
 296MODULE_PARM_DESC(myri10ge_flow_control, "Pause parameter");
 297
 298static int myri10ge_deassert_wait = 1;
 299module_param(myri10ge_deassert_wait, int, 0644);
 300MODULE_PARM_DESC(myri10ge_deassert_wait,
 301                 "Wait when deasserting legacy interrupts");
 302
 303static int myri10ge_force_firmware = 0;
 304module_param(myri10ge_force_firmware, int, 0444);
 305MODULE_PARM_DESC(myri10ge_force_firmware,
 306                 "Force firmware to assume aligned completions");
 307
 308static int myri10ge_initial_mtu = MYRI10GE_MAX_ETHER_MTU - ETH_HLEN;
 309module_param(myri10ge_initial_mtu, int, 0444);
 310MODULE_PARM_DESC(myri10ge_initial_mtu, "Initial MTU");
 311
 312static int myri10ge_napi_weight = 64;
 313module_param(myri10ge_napi_weight, int, 0444);
 314MODULE_PARM_DESC(myri10ge_napi_weight, "Set NAPI weight");
 315
 316static int myri10ge_watchdog_timeout = 1;
 317module_param(myri10ge_watchdog_timeout, int, 0444);
 318MODULE_PARM_DESC(myri10ge_watchdog_timeout, "Set watchdog timeout");
 319
 320static int myri10ge_max_irq_loops = 1048576;
 321module_param(myri10ge_max_irq_loops, int, 0444);
 322MODULE_PARM_DESC(myri10ge_max_irq_loops,
 323                 "Set stuck legacy IRQ detection threshold");
 324
 325#define MYRI10GE_MSG_DEFAULT NETIF_MSG_LINK
 326
 327static int myri10ge_debug = -1; /* defaults above */
 328module_param(myri10ge_debug, int, 0);
 329MODULE_PARM_DESC(myri10ge_debug, "Debug level (0=none,...,16=all)");
 330
 331static int myri10ge_fill_thresh = 256;
 332module_param(myri10ge_fill_thresh, int, 0644);
 333MODULE_PARM_DESC(myri10ge_fill_thresh, "Number of empty rx slots allowed");
 334
 335static int myri10ge_reset_recover = 1;
 336
 337static int myri10ge_max_slices = 1;
 338module_param(myri10ge_max_slices, int, 0444);
 339MODULE_PARM_DESC(myri10ge_max_slices, "Max tx/rx queues");
 340
 341static int myri10ge_rss_hash = MXGEFW_RSS_HASH_TYPE_SRC_DST_PORT;
 342module_param(myri10ge_rss_hash, int, 0444);
 343MODULE_PARM_DESC(myri10ge_rss_hash, "Type of RSS hashing to do");
 344
 345static int myri10ge_dca = 1;
 346module_param(myri10ge_dca, int, 0444);
 347MODULE_PARM_DESC(myri10ge_dca, "Enable DCA if possible");
 348
 349#define MYRI10GE_FW_OFFSET 1024*1024
 350#define MYRI10GE_HIGHPART_TO_U32(X) \
 351(sizeof (X) == 8) ? ((u32)((u64)(X) >> 32)) : (0)
 352#define MYRI10GE_LOWPART_TO_U32(X) ((u32)(X))
 353
 354#define myri10ge_pio_copy(to,from,size) __iowrite64_copy(to,from,size/8)
 355
 356static void myri10ge_set_multicast_list(struct net_device *dev);
 357static netdev_tx_t myri10ge_sw_tso(struct sk_buff *skb,
 358                                         struct net_device *dev);
 359
 360static inline void put_be32(__be32 val, __be32 __iomem * p)
 361{
 362        __raw_writel((__force __u32) val, (__force void __iomem *)p);
 363}
 364
 365static void myri10ge_get_stats(struct net_device *dev,
 366                               struct rtnl_link_stats64 *stats);
 367
 368static void set_fw_name(struct myri10ge_priv *mgp, char *name, bool allocated)
 369{
 370        if (mgp->fw_name_allocated)
 371                kfree(mgp->fw_name);
 372        mgp->fw_name = name;
 373        mgp->fw_name_allocated = allocated;
 374}
 375
 376static int
 377myri10ge_send_cmd(struct myri10ge_priv *mgp, u32 cmd,
 378                  struct myri10ge_cmd *data, int atomic)
 379{
 380        struct mcp_cmd *buf;
 381        char buf_bytes[sizeof(*buf) + 8];
 382        struct mcp_cmd_response *response = mgp->cmd;
 383        char __iomem *cmd_addr = mgp->sram + MXGEFW_ETH_CMD;
 384        u32 dma_low, dma_high, result, value;
 385        int sleep_total = 0;
 386
 387        /* ensure buf is aligned to 8 bytes */
 388        buf = (struct mcp_cmd *)ALIGN((unsigned long)buf_bytes, 8);
 389
 390        buf->data0 = htonl(data->data0);
 391        buf->data1 = htonl(data->data1);
 392        buf->data2 = htonl(data->data2);
 393        buf->cmd = htonl(cmd);
 394        dma_low = MYRI10GE_LOWPART_TO_U32(mgp->cmd_bus);
 395        dma_high = MYRI10GE_HIGHPART_TO_U32(mgp->cmd_bus);
 396
 397        buf->response_addr.low = htonl(dma_low);
 398        buf->response_addr.high = htonl(dma_high);
 399        response->result = htonl(MYRI10GE_NO_RESPONSE_RESULT);
 400        mb();
 401        myri10ge_pio_copy(cmd_addr, buf, sizeof(*buf));
 402
 403        /* wait up to 15ms. Longest command is the DMA benchmark,
 404         * which is capped at 5ms, but runs from a timeout handler
 405         * that runs every 7.8ms. So a 15ms timeout leaves us with
 406         * a 2.2ms margin
 407         */
 408        if (atomic) {
 409                /* if atomic is set, do not sleep,
 410                 * and try to get the completion quickly
 411                 * (1ms will be enough for those commands) */
 412                for (sleep_total = 0;
 413                     sleep_total < 1000 &&
 414                     response->result == htonl(MYRI10GE_NO_RESPONSE_RESULT);
 415                     sleep_total += 10) {
 416                        udelay(10);
 417                        mb();
 418                }
 419        } else {
 420                /* use msleep for most command */
 421                for (sleep_total = 0;
 422                     sleep_total < 15 &&
 423                     response->result == htonl(MYRI10GE_NO_RESPONSE_RESULT);
 424                     sleep_total++)
 425                        msleep(1);
 426        }
 427
 428        result = ntohl(response->result);
 429        value = ntohl(response->data);
 430        if (result != MYRI10GE_NO_RESPONSE_RESULT) {
 431                if (result == 0) {
 432                        data->data0 = value;
 433                        return 0;
 434                } else if (result == MXGEFW_CMD_UNKNOWN) {
 435                        return -ENOSYS;
 436                } else if (result == MXGEFW_CMD_ERROR_UNALIGNED) {
 437                        return -E2BIG;
 438                } else if (result == MXGEFW_CMD_ERROR_RANGE &&
 439                           cmd == MXGEFW_CMD_ENABLE_RSS_QUEUES &&
 440                           (data->
 441                            data1 & MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES) !=
 442                           0) {
 443                        return -ERANGE;
 444                } else {
 445                        dev_err(&mgp->pdev->dev,
 446                                "command %d failed, result = %d\n",
 447                                cmd, result);
 448                        return -ENXIO;
 449                }
 450        }
 451
 452        dev_err(&mgp->pdev->dev, "command %d timed out, result = %d\n",
 453                cmd, result);
 454        return -EAGAIN;
 455}
 456
 457/*
 458 * The eeprom strings on the lanaiX have the format
 459 * SN=x\0
 460 * MAC=x:x:x:x:x:x\0
 461 * PT:ddd mmm xx xx:xx:xx xx\0
 462 * PV:ddd mmm xx xx:xx:xx xx\0
 463 */
 464static int myri10ge_read_mac_addr(struct myri10ge_priv *mgp)
 465{
 466        char *ptr, *limit;
 467        int i;
 468
 469        ptr = mgp->eeprom_strings;
 470        limit = mgp->eeprom_strings + MYRI10GE_EEPROM_STRINGS_SIZE;
 471
 472        while (*ptr != '\0' && ptr < limit) {
 473                if (memcmp(ptr, "MAC=", 4) == 0) {
 474                        ptr += 4;
 475                        mgp->mac_addr_string = ptr;
 476                        for (i = 0; i < 6; i++) {
 477                                if ((ptr + 2) > limit)
 478                                        goto abort;
 479                                mgp->mac_addr[i] =
 480                                    simple_strtoul(ptr, &ptr, 16);
 481                                ptr += 1;
 482                        }
 483                }
 484                if (memcmp(ptr, "PC=", 3) == 0) {
 485                        ptr += 3;
 486                        mgp->product_code_string = ptr;
 487                }
 488                if (memcmp((const void *)ptr, "SN=", 3) == 0) {
 489                        ptr += 3;
 490                        mgp->serial_number = simple_strtoul(ptr, &ptr, 10);
 491                }
 492                while (ptr < limit && *ptr++) ;
 493        }
 494
 495        return 0;
 496
 497abort:
 498        dev_err(&mgp->pdev->dev, "failed to parse eeprom_strings\n");
 499        return -ENXIO;
 500}
 501
 502/*
 503 * Enable or disable periodic RDMAs from the host to make certain
 504 * chipsets resend dropped PCIe messages
 505 */
 506
 507static void myri10ge_dummy_rdma(struct myri10ge_priv *mgp, int enable)
 508{
 509        char __iomem *submit;
 510        __be32 buf[16] __attribute__ ((__aligned__(8)));
 511        u32 dma_low, dma_high;
 512        int i;
 513
 514        /* clear confirmation addr */
 515        mgp->cmd->data = 0;
 516        mb();
 517
 518        /* send a rdma command to the PCIe engine, and wait for the
 519         * response in the confirmation address.  The firmware should
 520         * write a -1 there to indicate it is alive and well
 521         */
 522        dma_low = MYRI10GE_LOWPART_TO_U32(mgp->cmd_bus);
 523        dma_high = MYRI10GE_HIGHPART_TO_U32(mgp->cmd_bus);
 524
 525        buf[0] = htonl(dma_high);       /* confirm addr MSW */
 526        buf[1] = htonl(dma_low);        /* confirm addr LSW */
 527        buf[2] = MYRI10GE_NO_CONFIRM_DATA;      /* confirm data */
 528        buf[3] = htonl(dma_high);       /* dummy addr MSW */
 529        buf[4] = htonl(dma_low);        /* dummy addr LSW */
 530        buf[5] = htonl(enable); /* enable? */
 531
 532        submit = mgp->sram + MXGEFW_BOOT_DUMMY_RDMA;
 533
 534        myri10ge_pio_copy(submit, &buf, sizeof(buf));
 535        for (i = 0; mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA && i < 20; i++)
 536                msleep(1);
 537        if (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA)
 538                dev_err(&mgp->pdev->dev, "dummy rdma %s failed\n",
 539                        (enable ? "enable" : "disable"));
 540}
 541
 542static int
 543myri10ge_validate_firmware(struct myri10ge_priv *mgp,
 544                           struct mcp_gen_header *hdr)
 545{
 546        struct device *dev = &mgp->pdev->dev;
 547
 548        /* check firmware type */
 549        if (ntohl(hdr->mcp_type) != MCP_TYPE_ETH) {
 550                dev_err(dev, "Bad firmware type: 0x%x\n", ntohl(hdr->mcp_type));
 551                return -EINVAL;
 552        }
 553
 554        /* save firmware version for ethtool */
 555        strncpy(mgp->fw_version, hdr->version, sizeof(mgp->fw_version));
 556        mgp->fw_version[sizeof(mgp->fw_version) - 1] = '\0';
 557
 558        sscanf(mgp->fw_version, "%d.%d.%d", &mgp->fw_ver_major,
 559               &mgp->fw_ver_minor, &mgp->fw_ver_tiny);
 560
 561        if (!(mgp->fw_ver_major == MXGEFW_VERSION_MAJOR &&
 562              mgp->fw_ver_minor == MXGEFW_VERSION_MINOR)) {
 563                dev_err(dev, "Found firmware version %s\n", mgp->fw_version);
 564                dev_err(dev, "Driver needs %d.%d\n", MXGEFW_VERSION_MAJOR,
 565                        MXGEFW_VERSION_MINOR);
 566                return -EINVAL;
 567        }
 568        return 0;
 569}
 570
 571static int myri10ge_load_hotplug_firmware(struct myri10ge_priv *mgp, u32 * size)
 572{
 573        unsigned crc, reread_crc;
 574        const struct firmware *fw;
 575        struct device *dev = &mgp->pdev->dev;
 576        unsigned char *fw_readback;
 577        struct mcp_gen_header *hdr;
 578        size_t hdr_offset;
 579        int status;
 580        unsigned i;
 581
 582        if ((status = request_firmware(&fw, mgp->fw_name, dev)) < 0) {
 583                dev_err(dev, "Unable to load %s firmware image via hotplug\n",
 584                        mgp->fw_name);
 585                status = -EINVAL;
 586                goto abort_with_nothing;
 587        }
 588
 589        /* check size */
 590
 591        if (fw->size >= mgp->sram_size - MYRI10GE_FW_OFFSET ||
 592            fw->size < MCP_HEADER_PTR_OFFSET + 4) {
 593                dev_err(dev, "Firmware size invalid:%d\n", (int)fw->size);
 594                status = -EINVAL;
 595                goto abort_with_fw;
 596        }
 597
 598        /* check id */
 599        hdr_offset = ntohl(*(__be32 *) (fw->data + MCP_HEADER_PTR_OFFSET));
 600        if ((hdr_offset & 3) || hdr_offset + sizeof(*hdr) > fw->size) {
 601                dev_err(dev, "Bad firmware file\n");
 602                status = -EINVAL;
 603                goto abort_with_fw;
 604        }
 605        hdr = (void *)(fw->data + hdr_offset);
 606
 607        status = myri10ge_validate_firmware(mgp, hdr);
 608        if (status != 0)
 609                goto abort_with_fw;
 610
 611        crc = crc32(~0, fw->data, fw->size);
 612        for (i = 0; i < fw->size; i += 256) {
 613                myri10ge_pio_copy(mgp->sram + MYRI10GE_FW_OFFSET + i,
 614                                  fw->data + i,
 615                                  min(256U, (unsigned)(fw->size - i)));
 616                mb();
 617                readb(mgp->sram);
 618        }
 619        fw_readback = vmalloc(fw->size);
 620        if (!fw_readback) {
 621                status = -ENOMEM;
 622                goto abort_with_fw;
 623        }
 624        /* corruption checking is good for parity recovery and buggy chipset */
 625        memcpy_fromio(fw_readback, mgp->sram + MYRI10GE_FW_OFFSET, fw->size);
 626        reread_crc = crc32(~0, fw_readback, fw->size);
 627        vfree(fw_readback);
 628        if (crc != reread_crc) {
 629                dev_err(dev, "CRC failed(fw-len=%u), got 0x%x (expect 0x%x)\n",
 630                        (unsigned)fw->size, reread_crc, crc);
 631                status = -EIO;
 632                goto abort_with_fw;
 633        }
 634        *size = (u32) fw->size;
 635
 636abort_with_fw:
 637        release_firmware(fw);
 638
 639abort_with_nothing:
 640        return status;
 641}
 642
 643static int myri10ge_adopt_running_firmware(struct myri10ge_priv *mgp)
 644{
 645        struct mcp_gen_header *hdr;
 646        struct device *dev = &mgp->pdev->dev;
 647        const size_t bytes = sizeof(struct mcp_gen_header);
 648        size_t hdr_offset;
 649        int status;
 650
 651        /* find running firmware header */
 652        hdr_offset = swab32(readl(mgp->sram + MCP_HEADER_PTR_OFFSET));
 653
 654        if ((hdr_offset & 3) || hdr_offset + sizeof(*hdr) > mgp->sram_size) {
 655                dev_err(dev, "Running firmware has bad header offset (%d)\n",
 656                        (int)hdr_offset);
 657                return -EIO;
 658        }
 659
 660        /* copy header of running firmware from SRAM to host memory to
 661         * validate firmware */
 662        hdr = kmalloc(bytes, GFP_KERNEL);
 663        if (hdr == NULL)
 664                return -ENOMEM;
 665
 666        memcpy_fromio(hdr, mgp->sram + hdr_offset, bytes);
 667        status = myri10ge_validate_firmware(mgp, hdr);
 668        kfree(hdr);
 669
 670        /* check to see if adopted firmware has bug where adopting
 671         * it will cause broadcasts to be filtered unless the NIC
 672         * is kept in ALLMULTI mode */
 673        if (mgp->fw_ver_major == 1 && mgp->fw_ver_minor == 4 &&
 674            mgp->fw_ver_tiny >= 4 && mgp->fw_ver_tiny <= 11) {
 675                mgp->adopted_rx_filter_bug = 1;
 676                dev_warn(dev, "Adopting fw %d.%d.%d: "
 677                         "working around rx filter bug\n",
 678                         mgp->fw_ver_major, mgp->fw_ver_minor,
 679                         mgp->fw_ver_tiny);
 680        }
 681        return status;
 682}
 683
 684static int myri10ge_get_firmware_capabilities(struct myri10ge_priv *mgp)
 685{
 686        struct myri10ge_cmd cmd;
 687        int status;
 688
 689        /* probe for IPv6 TSO support */
 690        mgp->features = NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_TSO;
 691        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_TSO6_HDR_SIZE,
 692                                   &cmd, 0);
 693        if (status == 0) {
 694                mgp->max_tso6 = cmd.data0;
 695                mgp->features |= NETIF_F_TSO6;
 696        }
 697
 698        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_RX_RING_SIZE, &cmd, 0);
 699        if (status != 0) {
 700                dev_err(&mgp->pdev->dev,
 701                        "failed MXGEFW_CMD_GET_RX_RING_SIZE\n");
 702                return -ENXIO;
 703        }
 704
 705        mgp->max_intr_slots = 2 * (cmd.data0 / sizeof(struct mcp_dma_addr));
 706
 707        return 0;
 708}
 709
 710static int myri10ge_load_firmware(struct myri10ge_priv *mgp, int adopt)
 711{
 712        char __iomem *submit;
 713        __be32 buf[16] __attribute__ ((__aligned__(8)));
 714        u32 dma_low, dma_high, size;
 715        int status, i;
 716
 717        size = 0;
 718        status = myri10ge_load_hotplug_firmware(mgp, &size);
 719        if (status) {
 720                if (!adopt)
 721                        return status;
 722                dev_warn(&mgp->pdev->dev, "hotplug firmware loading failed\n");
 723
 724                /* Do not attempt to adopt firmware if there
 725                 * was a bad crc */
 726                if (status == -EIO)
 727                        return status;
 728
 729                status = myri10ge_adopt_running_firmware(mgp);
 730                if (status != 0) {
 731                        dev_err(&mgp->pdev->dev,
 732                                "failed to adopt running firmware\n");
 733                        return status;
 734                }
 735                dev_info(&mgp->pdev->dev,
 736                         "Successfully adopted running firmware\n");
 737                if (mgp->tx_boundary == 4096) {
 738                        dev_warn(&mgp->pdev->dev,
 739                                 "Using firmware currently running on NIC"
 740                                 ".  For optimal\n");
 741                        dev_warn(&mgp->pdev->dev,
 742                                 "performance consider loading optimized "
 743                                 "firmware\n");
 744                        dev_warn(&mgp->pdev->dev, "via hotplug\n");
 745                }
 746
 747                set_fw_name(mgp, "adopted", false);
 748                mgp->tx_boundary = 2048;
 749                myri10ge_dummy_rdma(mgp, 1);
 750                status = myri10ge_get_firmware_capabilities(mgp);
 751                return status;
 752        }
 753
 754        /* clear confirmation addr */
 755        mgp->cmd->data = 0;
 756        mb();
 757
 758        /* send a reload command to the bootstrap MCP, and wait for the
 759         *  response in the confirmation address.  The firmware should
 760         * write a -1 there to indicate it is alive and well
 761         */
 762        dma_low = MYRI10GE_LOWPART_TO_U32(mgp->cmd_bus);
 763        dma_high = MYRI10GE_HIGHPART_TO_U32(mgp->cmd_bus);
 764
 765        buf[0] = htonl(dma_high);       /* confirm addr MSW */
 766        buf[1] = htonl(dma_low);        /* confirm addr LSW */
 767        buf[2] = MYRI10GE_NO_CONFIRM_DATA;      /* confirm data */
 768
 769        /* FIX: All newest firmware should un-protect the bottom of
 770         * the sram before handoff. However, the very first interfaces
 771         * do not. Therefore the handoff copy must skip the first 8 bytes
 772         */
 773        buf[3] = htonl(MYRI10GE_FW_OFFSET + 8); /* where the code starts */
 774        buf[4] = htonl(size - 8);       /* length of code */
 775        buf[5] = htonl(8);      /* where to copy to */
 776        buf[6] = htonl(0);      /* where to jump to */
 777
 778        submit = mgp->sram + MXGEFW_BOOT_HANDOFF;
 779
 780        myri10ge_pio_copy(submit, &buf, sizeof(buf));
 781        mb();
 782        msleep(1);
 783        mb();
 784        i = 0;
 785        while (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA && i < 9) {
 786                msleep(1 << i);
 787                i++;
 788        }
 789        if (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA) {
 790                dev_err(&mgp->pdev->dev, "handoff failed\n");
 791                return -ENXIO;
 792        }
 793        myri10ge_dummy_rdma(mgp, 1);
 794        status = myri10ge_get_firmware_capabilities(mgp);
 795
 796        return status;
 797}
 798
 799static int myri10ge_update_mac_address(struct myri10ge_priv *mgp, u8 * addr)
 800{
 801        struct myri10ge_cmd cmd;
 802        int status;
 803
 804        cmd.data0 = ((addr[0] << 24) | (addr[1] << 16)
 805                     | (addr[2] << 8) | addr[3]);
 806
 807        cmd.data1 = ((addr[4] << 8) | (addr[5]));
 808
 809        status = myri10ge_send_cmd(mgp, MXGEFW_SET_MAC_ADDRESS, &cmd, 0);
 810        return status;
 811}
 812
 813static int myri10ge_change_pause(struct myri10ge_priv *mgp, int pause)
 814{
 815        struct myri10ge_cmd cmd;
 816        int status, ctl;
 817
 818        ctl = pause ? MXGEFW_ENABLE_FLOW_CONTROL : MXGEFW_DISABLE_FLOW_CONTROL;
 819        status = myri10ge_send_cmd(mgp, ctl, &cmd, 0);
 820
 821        if (status) {
 822                netdev_err(mgp->dev, "Failed to set flow control mode\n");
 823                return status;
 824        }
 825        mgp->pause = pause;
 826        return 0;
 827}
 828
 829static void
 830myri10ge_change_promisc(struct myri10ge_priv *mgp, int promisc, int atomic)
 831{
 832        struct myri10ge_cmd cmd;
 833        int status, ctl;
 834
 835        ctl = promisc ? MXGEFW_ENABLE_PROMISC : MXGEFW_DISABLE_PROMISC;
 836        status = myri10ge_send_cmd(mgp, ctl, &cmd, atomic);
 837        if (status)
 838                netdev_err(mgp->dev, "Failed to set promisc mode\n");
 839}
 840
 841static int myri10ge_dma_test(struct myri10ge_priv *mgp, int test_type)
 842{
 843        struct myri10ge_cmd cmd;
 844        int status;
 845        u32 len;
 846        struct page *dmatest_page;
 847        dma_addr_t dmatest_bus;
 848        char *test = " ";
 849
 850        dmatest_page = alloc_page(GFP_KERNEL);
 851        if (!dmatest_page)
 852                return -ENOMEM;
 853        dmatest_bus = pci_map_page(mgp->pdev, dmatest_page, 0, PAGE_SIZE,
 854                                   DMA_BIDIRECTIONAL);
 855        if (unlikely(pci_dma_mapping_error(mgp->pdev, dmatest_bus))) {
 856                __free_page(dmatest_page);
 857                return -ENOMEM;
 858        }
 859
 860        /* Run a small DMA test.
 861         * The magic multipliers to the length tell the firmware
 862         * to do DMA read, write, or read+write tests.  The
 863         * results are returned in cmd.data0.  The upper 16
 864         * bits or the return is the number of transfers completed.
 865         * The lower 16 bits is the time in 0.5us ticks that the
 866         * transfers took to complete.
 867         */
 868
 869        len = mgp->tx_boundary;
 870
 871        cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
 872        cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
 873        cmd.data2 = len * 0x10000;
 874        status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
 875        if (status != 0) {
 876                test = "read";
 877                goto abort;
 878        }
 879        mgp->read_dma = ((cmd.data0 >> 16) * len * 2) / (cmd.data0 & 0xffff);
 880        cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
 881        cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
 882        cmd.data2 = len * 0x1;
 883        status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
 884        if (status != 0) {
 885                test = "write";
 886                goto abort;
 887        }
 888        mgp->write_dma = ((cmd.data0 >> 16) * len * 2) / (cmd.data0 & 0xffff);
 889
 890        cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
 891        cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
 892        cmd.data2 = len * 0x10001;
 893        status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
 894        if (status != 0) {
 895                test = "read/write";
 896                goto abort;
 897        }
 898        mgp->read_write_dma = ((cmd.data0 >> 16) * len * 2 * 2) /
 899            (cmd.data0 & 0xffff);
 900
 901abort:
 902        pci_unmap_page(mgp->pdev, dmatest_bus, PAGE_SIZE, DMA_BIDIRECTIONAL);
 903        put_page(dmatest_page);
 904
 905        if (status != 0 && test_type != MXGEFW_CMD_UNALIGNED_TEST)
 906                dev_warn(&mgp->pdev->dev, "DMA %s benchmark failed: %d\n",
 907                         test, status);
 908
 909        return status;
 910}
 911
 912static int myri10ge_reset(struct myri10ge_priv *mgp)
 913{
 914        struct myri10ge_cmd cmd;
 915        struct myri10ge_slice_state *ss;
 916        int i, status;
 917        size_t bytes;
 918#ifdef CONFIG_MYRI10GE_DCA
 919        unsigned long dca_tag_off;
 920#endif
 921
 922        /* try to send a reset command to the card to see if it
 923         * is alive */
 924        memset(&cmd, 0, sizeof(cmd));
 925        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_RESET, &cmd, 0);
 926        if (status != 0) {
 927                dev_err(&mgp->pdev->dev, "failed reset\n");
 928                return -ENXIO;
 929        }
 930
 931        (void)myri10ge_dma_test(mgp, MXGEFW_DMA_TEST);
 932        /*
 933         * Use non-ndis mcp_slot (eg, 4 bytes total,
 934         * no toeplitz hash value returned.  Older firmware will
 935         * not understand this command, but will use the correct
 936         * sized mcp_slot, so we ignore error returns
 937         */
 938        cmd.data0 = MXGEFW_RSS_MCP_SLOT_TYPE_MIN;
 939        (void)myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_MCP_SLOT_TYPE, &cmd, 0);
 940
 941        /* Now exchange information about interrupts  */
 942
 943        bytes = mgp->max_intr_slots * sizeof(*mgp->ss[0].rx_done.entry);
 944        cmd.data0 = (u32) bytes;
 945        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_SIZE, &cmd, 0);
 946
 947        /*
 948         * Even though we already know how many slices are supported
 949         * via myri10ge_probe_slices() MXGEFW_CMD_GET_MAX_RSS_QUEUES
 950         * has magic side effects, and must be called after a reset.
 951         * It must be called prior to calling any RSS related cmds,
 952         * including assigning an interrupt queue for anything but
 953         * slice 0.  It must also be called *after*
 954         * MXGEFW_CMD_SET_INTRQ_SIZE, since the intrq size is used by
 955         * the firmware to compute offsets.
 956         */
 957
 958        if (mgp->num_slices > 1) {
 959
 960                /* ask the maximum number of slices it supports */
 961                status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_RSS_QUEUES,
 962                                           &cmd, 0);
 963                if (status != 0) {
 964                        dev_err(&mgp->pdev->dev,
 965                                "failed to get number of slices\n");
 966                }
 967
 968                /*
 969                 * MXGEFW_CMD_ENABLE_RSS_QUEUES must be called prior
 970                 * to setting up the interrupt queue DMA
 971                 */
 972
 973                cmd.data0 = mgp->num_slices;
 974                cmd.data1 = MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE;
 975                if (mgp->dev->real_num_tx_queues > 1)
 976                        cmd.data1 |= MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES;
 977                status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ENABLE_RSS_QUEUES,
 978                                           &cmd, 0);
 979
 980                /* Firmware older than 1.4.32 only supports multiple
 981                 * RX queues, so if we get an error, first retry using a
 982                 * single TX queue before giving up */
 983                if (status != 0 && mgp->dev->real_num_tx_queues > 1) {
 984                        netif_set_real_num_tx_queues(mgp->dev, 1);
 985                        cmd.data0 = mgp->num_slices;
 986                        cmd.data1 = MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE;
 987                        status = myri10ge_send_cmd(mgp,
 988                                                   MXGEFW_CMD_ENABLE_RSS_QUEUES,
 989                                                   &cmd, 0);
 990                }
 991
 992                if (status != 0) {
 993                        dev_err(&mgp->pdev->dev,
 994                                "failed to set number of slices\n");
 995
 996                        return status;
 997                }
 998        }
 999        for (i = 0; i < mgp->num_slices; i++) {
1000                ss = &mgp->ss[i];
1001                cmd.data0 = MYRI10GE_LOWPART_TO_U32(ss->rx_done.bus);
1002                cmd.data1 = MYRI10GE_HIGHPART_TO_U32(ss->rx_done.bus);
1003                cmd.data2 = i;
1004                status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_DMA,
1005                                            &cmd, 0);
1006        }
1007
1008        status |=
1009            myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_IRQ_ACK_OFFSET, &cmd, 0);
1010        for (i = 0; i < mgp->num_slices; i++) {
1011                ss = &mgp->ss[i];
1012                ss->irq_claim =
1013                    (__iomem __be32 *) (mgp->sram + cmd.data0 + 8 * i);
1014        }
1015        status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET,
1016                                    &cmd, 0);
1017        mgp->irq_deassert = (__iomem __be32 *) (mgp->sram + cmd.data0);
1018
1019        status |= myri10ge_send_cmd
1020            (mgp, MXGEFW_CMD_GET_INTR_COAL_DELAY_OFFSET, &cmd, 0);
1021        mgp->intr_coal_delay_ptr = (__iomem __be32 *) (mgp->sram + cmd.data0);
1022        if (status != 0) {
1023                dev_err(&mgp->pdev->dev, "failed set interrupt parameters\n");
1024                return status;
1025        }
1026        put_be32(htonl(mgp->intr_coal_delay), mgp->intr_coal_delay_ptr);
1027
1028#ifdef CONFIG_MYRI10GE_DCA
1029        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_DCA_OFFSET, &cmd, 0);
1030        dca_tag_off = cmd.data0;
1031        for (i = 0; i < mgp->num_slices; i++) {
1032                ss = &mgp->ss[i];
1033                if (status == 0) {
1034                        ss->dca_tag = (__iomem __be32 *)
1035                            (mgp->sram + dca_tag_off + 4 * i);
1036                } else {
1037                        ss->dca_tag = NULL;
1038                }
1039        }
1040#endif                          /* CONFIG_MYRI10GE_DCA */
1041
1042        /* reset mcp/driver shared state back to 0 */
1043
1044        mgp->link_changes = 0;
1045        for (i = 0; i < mgp->num_slices; i++) {
1046                ss = &mgp->ss[i];
1047
1048                memset(ss->rx_done.entry, 0, bytes);
1049                ss->tx.req = 0;
1050                ss->tx.done = 0;
1051                ss->tx.pkt_start = 0;
1052                ss->tx.pkt_done = 0;
1053                ss->rx_big.cnt = 0;
1054                ss->rx_small.cnt = 0;
1055                ss->rx_done.idx = 0;
1056                ss->rx_done.cnt = 0;
1057                ss->tx.wake_queue = 0;
1058                ss->tx.stop_queue = 0;
1059        }
1060
1061        status = myri10ge_update_mac_address(mgp, mgp->dev->dev_addr);
1062        myri10ge_change_pause(mgp, mgp->pause);
1063        myri10ge_set_multicast_list(mgp->dev);
1064        return status;
1065}
1066
1067#ifdef CONFIG_MYRI10GE_DCA
1068static int myri10ge_toggle_relaxed(struct pci_dev *pdev, int on)
1069{
1070        int ret;
1071        u16 ctl;
1072
1073        pcie_capability_read_word(pdev, PCI_EXP_DEVCTL, &ctl);
1074
1075        ret = (ctl & PCI_EXP_DEVCTL_RELAX_EN) >> 4;
1076        if (ret != on) {
1077                ctl &= ~PCI_EXP_DEVCTL_RELAX_EN;
1078                ctl |= (on << 4);
1079                pcie_capability_write_word(pdev, PCI_EXP_DEVCTL, ctl);
1080        }
1081        return ret;
1082}
1083
1084static void
1085myri10ge_write_dca(struct myri10ge_slice_state *ss, int cpu, int tag)
1086{
1087        ss->cached_dca_tag = tag;
1088        put_be32(htonl(tag), ss->dca_tag);
1089}
1090
1091static inline void myri10ge_update_dca(struct myri10ge_slice_state *ss)
1092{
1093        int cpu = get_cpu();
1094        int tag;
1095
1096        if (cpu != ss->cpu) {
1097                tag = dca3_get_tag(&ss->mgp->pdev->dev, cpu);
1098                if (ss->cached_dca_tag != tag)
1099                        myri10ge_write_dca(ss, cpu, tag);
1100                ss->cpu = cpu;
1101        }
1102        put_cpu();
1103}
1104
1105static void myri10ge_setup_dca(struct myri10ge_priv *mgp)
1106{
1107        int err, i;
1108        struct pci_dev *pdev = mgp->pdev;
1109
1110        if (mgp->ss[0].dca_tag == NULL || mgp->dca_enabled)
1111                return;
1112        if (!myri10ge_dca) {
1113                dev_err(&pdev->dev, "dca disabled by administrator\n");
1114                return;
1115        }
1116        err = dca_add_requester(&pdev->dev);
1117        if (err) {
1118                if (err != -ENODEV)
1119                        dev_err(&pdev->dev,
1120                                "dca_add_requester() failed, err=%d\n", err);
1121                return;
1122        }
1123        mgp->relaxed_order = myri10ge_toggle_relaxed(pdev, 0);
1124        mgp->dca_enabled = 1;
1125        for (i = 0; i < mgp->num_slices; i++) {
1126                mgp->ss[i].cpu = -1;
1127                mgp->ss[i].cached_dca_tag = -1;
1128                myri10ge_update_dca(&mgp->ss[i]);
1129        }
1130}
1131
1132static void myri10ge_teardown_dca(struct myri10ge_priv *mgp)
1133{
1134        struct pci_dev *pdev = mgp->pdev;
1135
1136        if (!mgp->dca_enabled)
1137                return;
1138        mgp->dca_enabled = 0;
1139        if (mgp->relaxed_order)
1140                myri10ge_toggle_relaxed(pdev, 1);
1141        dca_remove_requester(&pdev->dev);
1142}
1143
1144static int myri10ge_notify_dca_device(struct device *dev, void *data)
1145{
1146        struct myri10ge_priv *mgp;
1147        unsigned long event;
1148
1149        mgp = dev_get_drvdata(dev);
1150        event = *(unsigned long *)data;
1151
1152        if (event == DCA_PROVIDER_ADD)
1153                myri10ge_setup_dca(mgp);
1154        else if (event == DCA_PROVIDER_REMOVE)
1155                myri10ge_teardown_dca(mgp);
1156        return 0;
1157}
1158#endif                          /* CONFIG_MYRI10GE_DCA */
1159
1160static inline void
1161myri10ge_submit_8rx(struct mcp_kreq_ether_recv __iomem * dst,
1162                    struct mcp_kreq_ether_recv *src)
1163{
1164        __be32 low;
1165
1166        low = src->addr_low;
1167        src->addr_low = htonl(DMA_BIT_MASK(32));
1168        myri10ge_pio_copy(dst, src, 4 * sizeof(*src));
1169        mb();
1170        myri10ge_pio_copy(dst + 4, src + 4, 4 * sizeof(*src));
1171        mb();
1172        src->addr_low = low;
1173        put_be32(low, &dst->addr_low);
1174        mb();
1175}
1176
1177static inline void myri10ge_vlan_ip_csum(struct sk_buff *skb, __wsum hw_csum)
1178{
1179        struct vlan_hdr *vh = (struct vlan_hdr *)(skb->data);
1180
1181        if ((skb->protocol == htons(ETH_P_8021Q)) &&
1182            (vh->h_vlan_encapsulated_proto == htons(ETH_P_IP) ||
1183             vh->h_vlan_encapsulated_proto == htons(ETH_P_IPV6))) {
1184                skb->csum = hw_csum;
1185                skb->ip_summed = CHECKSUM_COMPLETE;
1186        }
1187}
1188
1189static void
1190myri10ge_alloc_rx_pages(struct myri10ge_priv *mgp, struct myri10ge_rx_buf *rx,
1191                        int bytes, int watchdog)
1192{
1193        struct page *page;
1194        dma_addr_t bus;
1195        int idx;
1196#if MYRI10GE_ALLOC_SIZE > 4096
1197        int end_offset;
1198#endif
1199
1200        if (unlikely(rx->watchdog_needed && !watchdog))
1201                return;
1202
1203        /* try to refill entire ring */
1204        while (rx->fill_cnt != (rx->cnt + rx->mask + 1)) {
1205                idx = rx->fill_cnt & rx->mask;
1206                if (rx->page_offset + bytes <= MYRI10GE_ALLOC_SIZE) {
1207                        /* we can use part of previous page */
1208                        get_page(rx->page);
1209                } else {
1210                        /* we need a new page */
1211                        page =
1212                            alloc_pages(GFP_ATOMIC | __GFP_COMP,
1213                                        MYRI10GE_ALLOC_ORDER);
1214                        if (unlikely(page == NULL)) {
1215                                if (rx->fill_cnt - rx->cnt < 16)
1216                                        rx->watchdog_needed = 1;
1217                                return;
1218                        }
1219
1220                        bus = pci_map_page(mgp->pdev, page, 0,
1221                                           MYRI10GE_ALLOC_SIZE,
1222                                           PCI_DMA_FROMDEVICE);
1223                        if (unlikely(pci_dma_mapping_error(mgp->pdev, bus))) {
1224                                __free_pages(page, MYRI10GE_ALLOC_ORDER);
1225                                if (rx->fill_cnt - rx->cnt < 16)
1226                                        rx->watchdog_needed = 1;
1227                                return;
1228                        }
1229
1230                        rx->page = page;
1231                        rx->page_offset = 0;
1232                        rx->bus = bus;
1233
1234                }
1235                rx->info[idx].page = rx->page;
1236                rx->info[idx].page_offset = rx->page_offset;
1237                /* note that this is the address of the start of the
1238                 * page */
1239                dma_unmap_addr_set(&rx->info[idx], bus, rx->bus);
1240                rx->shadow[idx].addr_low =
1241                    htonl(MYRI10GE_LOWPART_TO_U32(rx->bus) + rx->page_offset);
1242                rx->shadow[idx].addr_high =
1243                    htonl(MYRI10GE_HIGHPART_TO_U32(rx->bus));
1244
1245                /* start next packet on a cacheline boundary */
1246                rx->page_offset += SKB_DATA_ALIGN(bytes);
1247
1248#if MYRI10GE_ALLOC_SIZE > 4096
1249                /* don't cross a 4KB boundary */
1250                end_offset = rx->page_offset + bytes - 1;
1251                if ((unsigned)(rx->page_offset ^ end_offset) > 4095)
1252                        rx->page_offset = end_offset & ~4095;
1253#endif
1254                rx->fill_cnt++;
1255
1256                /* copy 8 descriptors to the firmware at a time */
1257                if ((idx & 7) == 7) {
1258                        myri10ge_submit_8rx(&rx->lanai[idx - 7],
1259                                            &rx->shadow[idx - 7]);
1260                }
1261        }
1262}
1263
1264static inline void
1265myri10ge_unmap_rx_page(struct pci_dev *pdev,
1266                       struct myri10ge_rx_buffer_state *info, int bytes)
1267{
1268        /* unmap the recvd page if we're the only or last user of it */
1269        if (bytes >= MYRI10GE_ALLOC_SIZE / 2 ||
1270            (info->page_offset + 2 * bytes) > MYRI10GE_ALLOC_SIZE) {
1271                pci_unmap_page(pdev, (dma_unmap_addr(info, bus)
1272                                      & ~(MYRI10GE_ALLOC_SIZE - 1)),
1273                               MYRI10GE_ALLOC_SIZE, PCI_DMA_FROMDEVICE);
1274        }
1275}
1276
1277/*
1278 * GRO does not support acceleration of tagged vlan frames, and
1279 * this NIC does not support vlan tag offload, so we must pop
1280 * the tag ourselves to be able to achieve GRO performance that
1281 * is comparable to LRO.
1282 */
1283
1284static inline void
1285myri10ge_vlan_rx(struct net_device *dev, void *addr, struct sk_buff *skb)
1286{
1287        u8 *va;
1288        struct vlan_ethhdr *veh;
1289        struct skb_frag_struct *frag;
1290        __wsum vsum;
1291
1292        va = addr;
1293        va += MXGEFW_PAD;
1294        veh = (struct vlan_ethhdr *)va;
1295        if ((dev->features & NETIF_F_HW_VLAN_CTAG_RX) ==
1296            NETIF_F_HW_VLAN_CTAG_RX &&
1297            veh->h_vlan_proto == htons(ETH_P_8021Q)) {
1298                /* fixup csum if needed */
1299                if (skb->ip_summed == CHECKSUM_COMPLETE) {
1300                        vsum = csum_partial(va + ETH_HLEN, VLAN_HLEN, 0);
1301                        skb->csum = csum_sub(skb->csum, vsum);
1302                }
1303                /* pop tag */
1304                __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), ntohs(veh->h_vlan_TCI));
1305                memmove(va + VLAN_HLEN, va, 2 * ETH_ALEN);
1306                skb->len -= VLAN_HLEN;
1307                skb->data_len -= VLAN_HLEN;
1308                frag = skb_shinfo(skb)->frags;
1309                frag->page_offset += VLAN_HLEN;
1310                skb_frag_size_set(frag, skb_frag_size(frag) - VLAN_HLEN);
1311        }
1312}
1313
1314#define MYRI10GE_HLEN 64 /* Bytes to copy from page to skb linear memory */
1315
1316static inline int
1317myri10ge_rx_done(struct myri10ge_slice_state *ss, int len, __wsum csum)
1318{
1319        struct myri10ge_priv *mgp = ss->mgp;
1320        struct sk_buff *skb;
1321        struct skb_frag_struct *rx_frags;
1322        struct myri10ge_rx_buf *rx;
1323        int i, idx, remainder, bytes;
1324        struct pci_dev *pdev = mgp->pdev;
1325        struct net_device *dev = mgp->dev;
1326        u8 *va;
1327
1328        if (len <= mgp->small_bytes) {
1329                rx = &ss->rx_small;
1330                bytes = mgp->small_bytes;
1331        } else {
1332                rx = &ss->rx_big;
1333                bytes = mgp->big_bytes;
1334        }
1335
1336        len += MXGEFW_PAD;
1337        idx = rx->cnt & rx->mask;
1338        va = page_address(rx->info[idx].page) + rx->info[idx].page_offset;
1339        prefetch(va);
1340
1341        skb = napi_get_frags(&ss->napi);
1342        if (unlikely(skb == NULL)) {
1343                ss->stats.rx_dropped++;
1344                for (i = 0, remainder = len; remainder > 0; i++) {
1345                        myri10ge_unmap_rx_page(pdev, &rx->info[idx], bytes);
1346                        put_page(rx->info[idx].page);
1347                        rx->cnt++;
1348                        idx = rx->cnt & rx->mask;
1349                        remainder -= MYRI10GE_ALLOC_SIZE;
1350                }
1351                return 0;
1352        }
1353        rx_frags = skb_shinfo(skb)->frags;
1354        /* Fill skb_frag_struct(s) with data from our receive */
1355        for (i = 0, remainder = len; remainder > 0; i++) {
1356                myri10ge_unmap_rx_page(pdev, &rx->info[idx], bytes);
1357                skb_fill_page_desc(skb, i, rx->info[idx].page,
1358                                   rx->info[idx].page_offset,
1359                                   remainder < MYRI10GE_ALLOC_SIZE ?
1360                                   remainder : MYRI10GE_ALLOC_SIZE);
1361                rx->cnt++;
1362                idx = rx->cnt & rx->mask;
1363                remainder -= MYRI10GE_ALLOC_SIZE;
1364        }
1365
1366        /* remove padding */
1367        rx_frags[0].page_offset += MXGEFW_PAD;
1368        rx_frags[0].size -= MXGEFW_PAD;
1369        len -= MXGEFW_PAD;
1370
1371        skb->len = len;
1372        skb->data_len = len;
1373        skb->truesize += len;
1374        if (dev->features & NETIF_F_RXCSUM) {
1375                skb->ip_summed = CHECKSUM_COMPLETE;
1376                skb->csum = csum;
1377        }
1378        myri10ge_vlan_rx(mgp->dev, va, skb);
1379        skb_record_rx_queue(skb, ss - &mgp->ss[0]);
1380
1381        napi_gro_frags(&ss->napi);
1382
1383        return 1;
1384}
1385
1386static inline void
1387myri10ge_tx_done(struct myri10ge_slice_state *ss, int mcp_index)
1388{
1389        struct pci_dev *pdev = ss->mgp->pdev;
1390        struct myri10ge_tx_buf *tx = &ss->tx;
1391        struct netdev_queue *dev_queue;
1392        struct sk_buff *skb;
1393        int idx, len;
1394
1395        while (tx->pkt_done != mcp_index) {
1396                idx = tx->done & tx->mask;
1397                skb = tx->info[idx].skb;
1398
1399                /* Mark as free */
1400                tx->info[idx].skb = NULL;
1401                if (tx->info[idx].last) {
1402                        tx->pkt_done++;
1403                        tx->info[idx].last = 0;
1404                }
1405                tx->done++;
1406                len = dma_unmap_len(&tx->info[idx], len);
1407                dma_unmap_len_set(&tx->info[idx], len, 0);
1408                if (skb) {
1409                        ss->stats.tx_bytes += skb->len;
1410                        ss->stats.tx_packets++;
1411                        dev_consume_skb_irq(skb);
1412                        if (len)
1413                                pci_unmap_single(pdev,
1414                                                 dma_unmap_addr(&tx->info[idx],
1415                                                                bus), len,
1416                                                 PCI_DMA_TODEVICE);
1417                } else {
1418                        if (len)
1419                                pci_unmap_page(pdev,
1420                                               dma_unmap_addr(&tx->info[idx],
1421                                                              bus), len,
1422                                               PCI_DMA_TODEVICE);
1423                }
1424        }
1425
1426        dev_queue = netdev_get_tx_queue(ss->dev, ss - ss->mgp->ss);
1427        /*
1428         * Make a minimal effort to prevent the NIC from polling an
1429         * idle tx queue.  If we can't get the lock we leave the queue
1430         * active. In this case, either a thread was about to start
1431         * using the queue anyway, or we lost a race and the NIC will
1432         * waste some of its resources polling an inactive queue for a
1433         * while.
1434         */
1435
1436        if ((ss->mgp->dev->real_num_tx_queues > 1) &&
1437            __netif_tx_trylock(dev_queue)) {
1438                if (tx->req == tx->done) {
1439                        tx->queue_active = 0;
1440                        put_be32(htonl(1), tx->send_stop);
1441                        mb();
1442                }
1443                __netif_tx_unlock(dev_queue);
1444        }
1445
1446        /* start the queue if we've stopped it */
1447        if (netif_tx_queue_stopped(dev_queue) &&
1448            tx->req - tx->done < (tx->mask >> 1) &&
1449            ss->mgp->running == MYRI10GE_ETH_RUNNING) {
1450                tx->wake_queue++;
1451                netif_tx_wake_queue(dev_queue);
1452        }
1453}
1454
1455static inline int
1456myri10ge_clean_rx_done(struct myri10ge_slice_state *ss, int budget)
1457{
1458        struct myri10ge_rx_done *rx_done = &ss->rx_done;
1459        struct myri10ge_priv *mgp = ss->mgp;
1460        unsigned long rx_bytes = 0;
1461        unsigned long rx_packets = 0;
1462        unsigned long rx_ok;
1463        int idx = rx_done->idx;
1464        int cnt = rx_done->cnt;
1465        int work_done = 0;
1466        u16 length;
1467        __wsum checksum;
1468
1469        while (rx_done->entry[idx].length != 0 && work_done < budget) {
1470                length = ntohs(rx_done->entry[idx].length);
1471                rx_done->entry[idx].length = 0;
1472                checksum = csum_unfold(rx_done->entry[idx].checksum);
1473                rx_ok = myri10ge_rx_done(ss, length, checksum);
1474                rx_packets += rx_ok;
1475                rx_bytes += rx_ok * (unsigned long)length;
1476                cnt++;
1477                idx = cnt & (mgp->max_intr_slots - 1);
1478                work_done++;
1479        }
1480        rx_done->idx = idx;
1481        rx_done->cnt = cnt;
1482        ss->stats.rx_packets += rx_packets;
1483        ss->stats.rx_bytes += rx_bytes;
1484
1485        /* restock receive rings if needed */
1486        if (ss->rx_small.fill_cnt - ss->rx_small.cnt < myri10ge_fill_thresh)
1487                myri10ge_alloc_rx_pages(mgp, &ss->rx_small,
1488                                        mgp->small_bytes + MXGEFW_PAD, 0);
1489        if (ss->rx_big.fill_cnt - ss->rx_big.cnt < myri10ge_fill_thresh)
1490                myri10ge_alloc_rx_pages(mgp, &ss->rx_big, mgp->big_bytes, 0);
1491
1492        return work_done;
1493}
1494
1495static inline void myri10ge_check_statblock(struct myri10ge_priv *mgp)
1496{
1497        struct mcp_irq_data *stats = mgp->ss[0].fw_stats;
1498
1499        if (unlikely(stats->stats_updated)) {
1500                unsigned link_up = ntohl(stats->link_up);
1501                if (mgp->link_state != link_up) {
1502                        mgp->link_state = link_up;
1503
1504                        if (mgp->link_state == MXGEFW_LINK_UP) {
1505                                netif_info(mgp, link, mgp->dev, "link up\n");
1506                                netif_carrier_on(mgp->dev);
1507                                mgp->link_changes++;
1508                        } else {
1509                                netif_info(mgp, link, mgp->dev, "link %s\n",
1510                                           (link_up == MXGEFW_LINK_MYRINET ?
1511                                            "mismatch (Myrinet detected)" :
1512                                            "down"));
1513                                netif_carrier_off(mgp->dev);
1514                                mgp->link_changes++;
1515                        }
1516                }
1517                if (mgp->rdma_tags_available !=
1518                    ntohl(stats->rdma_tags_available)) {
1519                        mgp->rdma_tags_available =
1520                            ntohl(stats->rdma_tags_available);
1521                        netdev_warn(mgp->dev, "RDMA timed out! %d tags left\n",
1522                                    mgp->rdma_tags_available);
1523                }
1524                mgp->down_cnt += stats->link_down;
1525                if (stats->link_down)
1526                        wake_up(&mgp->down_wq);
1527        }
1528}
1529
1530static int myri10ge_poll(struct napi_struct *napi, int budget)
1531{
1532        struct myri10ge_slice_state *ss =
1533            container_of(napi, struct myri10ge_slice_state, napi);
1534        int work_done;
1535
1536#ifdef CONFIG_MYRI10GE_DCA
1537        if (ss->mgp->dca_enabled)
1538                myri10ge_update_dca(ss);
1539#endif
1540        /* process as many rx events as NAPI will allow */
1541        work_done = myri10ge_clean_rx_done(ss, budget);
1542
1543        if (work_done < budget) {
1544                napi_complete_done(napi, work_done);
1545                put_be32(htonl(3), ss->irq_claim);
1546        }
1547        return work_done;
1548}
1549
1550static irqreturn_t myri10ge_intr(int irq, void *arg)
1551{
1552        struct myri10ge_slice_state *ss = arg;
1553        struct myri10ge_priv *mgp = ss->mgp;
1554        struct mcp_irq_data *stats = ss->fw_stats;
1555        struct myri10ge_tx_buf *tx = &ss->tx;
1556        u32 send_done_count;
1557        int i;
1558
1559        /* an interrupt on a non-zero receive-only slice is implicitly
1560         * valid  since MSI-X irqs are not shared */
1561        if ((mgp->dev->real_num_tx_queues == 1) && (ss != mgp->ss)) {
1562                napi_schedule(&ss->napi);
1563                return IRQ_HANDLED;
1564        }
1565
1566        /* make sure it is our IRQ, and that the DMA has finished */
1567        if (unlikely(!stats->valid))
1568                return IRQ_NONE;
1569
1570        /* low bit indicates receives are present, so schedule
1571         * napi poll handler */
1572        if (stats->valid & 1)
1573                napi_schedule(&ss->napi);
1574
1575        if (!mgp->msi_enabled && !mgp->msix_enabled) {
1576                put_be32(0, mgp->irq_deassert);
1577                if (!myri10ge_deassert_wait)
1578                        stats->valid = 0;
1579                mb();
1580        } else
1581                stats->valid = 0;
1582
1583        /* Wait for IRQ line to go low, if using INTx */
1584        i = 0;
1585        while (1) {
1586                i++;
1587                /* check for transmit completes and receives */
1588                send_done_count = ntohl(stats->send_done_count);
1589                if (send_done_count != tx->pkt_done)
1590                        myri10ge_tx_done(ss, (int)send_done_count);
1591                if (unlikely(i > myri10ge_max_irq_loops)) {
1592                        netdev_warn(mgp->dev, "irq stuck?\n");
1593                        stats->valid = 0;
1594                        schedule_work(&mgp->watchdog_work);
1595                }
1596                if (likely(stats->valid == 0))
1597                        break;
1598                cpu_relax();
1599                barrier();
1600        }
1601
1602        /* Only slice 0 updates stats */
1603        if (ss == mgp->ss)
1604                myri10ge_check_statblock(mgp);
1605
1606        put_be32(htonl(3), ss->irq_claim + 1);
1607        return IRQ_HANDLED;
1608}
1609
1610static int
1611myri10ge_get_link_ksettings(struct net_device *netdev,
1612                            struct ethtool_link_ksettings *cmd)
1613{
1614        struct myri10ge_priv *mgp = netdev_priv(netdev);
1615        char *ptr;
1616        int i;
1617
1618        cmd->base.autoneg = AUTONEG_DISABLE;
1619        cmd->base.speed = SPEED_10000;
1620        cmd->base.duplex = DUPLEX_FULL;
1621
1622        /*
1623         * parse the product code to deterimine the interface type
1624         * (CX4, XFP, Quad Ribbon Fiber) by looking at the character
1625         * after the 3rd dash in the driver's cached copy of the
1626         * EEPROM's product code string.
1627         */
1628        ptr = mgp->product_code_string;
1629        if (ptr == NULL) {
1630                netdev_err(netdev, "Missing product code\n");
1631                return 0;
1632        }
1633        for (i = 0; i < 3; i++, ptr++) {
1634                ptr = strchr(ptr, '-');
1635                if (ptr == NULL) {
1636                        netdev_err(netdev, "Invalid product code %s\n",
1637                                   mgp->product_code_string);
1638                        return 0;
1639                }
1640        }
1641        if (*ptr == '2')
1642                ptr++;
1643        if (*ptr == 'R' || *ptr == 'Q' || *ptr == 'S') {
1644                /* We've found either an XFP, quad ribbon fiber, or SFP+ */
1645                cmd->base.port = PORT_FIBRE;
1646                ethtool_link_ksettings_add_link_mode(cmd, supported, FIBRE);
1647                ethtool_link_ksettings_add_link_mode(cmd, advertising, FIBRE);
1648        } else {
1649                cmd->base.port = PORT_OTHER;
1650        }
1651
1652        return 0;
1653}
1654
1655static void
1656myri10ge_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *info)
1657{
1658        struct myri10ge_priv *mgp = netdev_priv(netdev);
1659
1660        strlcpy(info->driver, "myri10ge", sizeof(info->driver));
1661        strlcpy(info->version, MYRI10GE_VERSION_STR, sizeof(info->version));
1662        strlcpy(info->fw_version, mgp->fw_version, sizeof(info->fw_version));
1663        strlcpy(info->bus_info, pci_name(mgp->pdev), sizeof(info->bus_info));
1664}
1665
1666static int
1667myri10ge_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *coal)
1668{
1669        struct myri10ge_priv *mgp = netdev_priv(netdev);
1670
1671        coal->rx_coalesce_usecs = mgp->intr_coal_delay;
1672        return 0;
1673}
1674
1675static int
1676myri10ge_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *coal)
1677{
1678        struct myri10ge_priv *mgp = netdev_priv(netdev);
1679
1680        mgp->intr_coal_delay = coal->rx_coalesce_usecs;
1681        put_be32(htonl(mgp->intr_coal_delay), mgp->intr_coal_delay_ptr);
1682        return 0;
1683}
1684
1685static void
1686myri10ge_get_pauseparam(struct net_device *netdev,
1687                        struct ethtool_pauseparam *pause)
1688{
1689        struct myri10ge_priv *mgp = netdev_priv(netdev);
1690
1691        pause->autoneg = 0;
1692        pause->rx_pause = mgp->pause;
1693        pause->tx_pause = mgp->pause;
1694}
1695
1696static int
1697myri10ge_set_pauseparam(struct net_device *netdev,
1698                        struct ethtool_pauseparam *pause)
1699{
1700        struct myri10ge_priv *mgp = netdev_priv(netdev);
1701
1702        if (pause->tx_pause != mgp->pause)
1703                return myri10ge_change_pause(mgp, pause->tx_pause);
1704        if (pause->rx_pause != mgp->pause)
1705                return myri10ge_change_pause(mgp, pause->rx_pause);
1706        if (pause->autoneg != 0)
1707                return -EINVAL;
1708        return 0;
1709}
1710
1711static void
1712myri10ge_get_ringparam(struct net_device *netdev,
1713                       struct ethtool_ringparam *ring)
1714{
1715        struct myri10ge_priv *mgp = netdev_priv(netdev);
1716
1717        ring->rx_mini_max_pending = mgp->ss[0].rx_small.mask + 1;
1718        ring->rx_max_pending = mgp->ss[0].rx_big.mask + 1;
1719        ring->rx_jumbo_max_pending = 0;
1720        ring->tx_max_pending = mgp->ss[0].tx.mask + 1;
1721        ring->rx_mini_pending = ring->rx_mini_max_pending;
1722        ring->rx_pending = ring->rx_max_pending;
1723        ring->rx_jumbo_pending = ring->rx_jumbo_max_pending;
1724        ring->tx_pending = ring->tx_max_pending;
1725}
1726
1727static const char myri10ge_gstrings_main_stats[][ETH_GSTRING_LEN] = {
1728        "rx_packets", "tx_packets", "rx_bytes", "tx_bytes", "rx_errors",
1729        "tx_errors", "rx_dropped", "tx_dropped", "multicast", "collisions",
1730        "rx_length_errors", "rx_over_errors", "rx_crc_errors",
1731        "rx_frame_errors", "rx_fifo_errors", "rx_missed_errors",
1732        "tx_aborted_errors", "tx_carrier_errors", "tx_fifo_errors",
1733        "tx_heartbeat_errors", "tx_window_errors",
1734        /* device-specific stats */
1735        "tx_boundary", "irq", "MSI", "MSIX",
1736        "read_dma_bw_MBs", "write_dma_bw_MBs", "read_write_dma_bw_MBs",
1737        "serial_number", "watchdog_resets",
1738#ifdef CONFIG_MYRI10GE_DCA
1739        "dca_capable_firmware", "dca_device_present",
1740#endif
1741        "link_changes", "link_up", "dropped_link_overflow",
1742        "dropped_link_error_or_filtered",
1743        "dropped_pause", "dropped_bad_phy", "dropped_bad_crc32",
1744        "dropped_unicast_filtered", "dropped_multicast_filtered",
1745        "dropped_runt", "dropped_overrun", "dropped_no_small_buffer",
1746        "dropped_no_big_buffer"
1747};
1748
1749static const char myri10ge_gstrings_slice_stats[][ETH_GSTRING_LEN] = {
1750        "----------- slice ---------",
1751        "tx_pkt_start", "tx_pkt_done", "tx_req", "tx_done",
1752        "rx_small_cnt", "rx_big_cnt",
1753        "wake_queue", "stop_queue", "tx_linearized",
1754};
1755
1756#define MYRI10GE_NET_STATS_LEN      21
1757#define MYRI10GE_MAIN_STATS_LEN  ARRAY_SIZE(myri10ge_gstrings_main_stats)
1758#define MYRI10GE_SLICE_STATS_LEN  ARRAY_SIZE(myri10ge_gstrings_slice_stats)
1759
1760static void
1761myri10ge_get_strings(struct net_device *netdev, u32 stringset, u8 * data)
1762{
1763        struct myri10ge_priv *mgp = netdev_priv(netdev);
1764        int i;
1765
1766        switch (stringset) {
1767        case ETH_SS_STATS:
1768                memcpy(data, *myri10ge_gstrings_main_stats,
1769                       sizeof(myri10ge_gstrings_main_stats));
1770                data += sizeof(myri10ge_gstrings_main_stats);
1771                for (i = 0; i < mgp->num_slices; i++) {
1772                        memcpy(data, *myri10ge_gstrings_slice_stats,
1773                               sizeof(myri10ge_gstrings_slice_stats));
1774                        data += sizeof(myri10ge_gstrings_slice_stats);
1775                }
1776                break;
1777        }
1778}
1779
1780static int myri10ge_get_sset_count(struct net_device *netdev, int sset)
1781{
1782        struct myri10ge_priv *mgp = netdev_priv(netdev);
1783
1784        switch (sset) {
1785        case ETH_SS_STATS:
1786                return MYRI10GE_MAIN_STATS_LEN +
1787                    mgp->num_slices * MYRI10GE_SLICE_STATS_LEN;
1788        default:
1789                return -EOPNOTSUPP;
1790        }
1791}
1792
1793static void
1794myri10ge_get_ethtool_stats(struct net_device *netdev,
1795                           struct ethtool_stats *stats, u64 * data)
1796{
1797        struct myri10ge_priv *mgp = netdev_priv(netdev);
1798        struct myri10ge_slice_state *ss;
1799        struct rtnl_link_stats64 link_stats;
1800        int slice;
1801        int i;
1802
1803        /* force stats update */
1804        memset(&link_stats, 0, sizeof(link_stats));
1805        (void)myri10ge_get_stats(netdev, &link_stats);
1806        for (i = 0; i < MYRI10GE_NET_STATS_LEN; i++)
1807                data[i] = ((u64 *)&link_stats)[i];
1808
1809        data[i++] = (unsigned int)mgp->tx_boundary;
1810        data[i++] = (unsigned int)mgp->pdev->irq;
1811        data[i++] = (unsigned int)mgp->msi_enabled;
1812        data[i++] = (unsigned int)mgp->msix_enabled;
1813        data[i++] = (unsigned int)mgp->read_dma;
1814        data[i++] = (unsigned int)mgp->write_dma;
1815        data[i++] = (unsigned int)mgp->read_write_dma;
1816        data[i++] = (unsigned int)mgp->serial_number;
1817        data[i++] = (unsigned int)mgp->watchdog_resets;
1818#ifdef CONFIG_MYRI10GE_DCA
1819        data[i++] = (unsigned int)(mgp->ss[0].dca_tag != NULL);
1820        data[i++] = (unsigned int)(mgp->dca_enabled);
1821#endif
1822        data[i++] = (unsigned int)mgp->link_changes;
1823
1824        /* firmware stats are useful only in the first slice */
1825        ss = &mgp->ss[0];
1826        data[i++] = (unsigned int)ntohl(ss->fw_stats->link_up);
1827        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_link_overflow);
1828        data[i++] =
1829            (unsigned int)ntohl(ss->fw_stats->dropped_link_error_or_filtered);
1830        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_pause);
1831        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_bad_phy);
1832        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_bad_crc32);
1833        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_unicast_filtered);
1834        data[i++] =
1835            (unsigned int)ntohl(ss->fw_stats->dropped_multicast_filtered);
1836        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_runt);
1837        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_overrun);
1838        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_no_small_buffer);
1839        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_no_big_buffer);
1840
1841        for (slice = 0; slice < mgp->num_slices; slice++) {
1842                ss = &mgp->ss[slice];
1843                data[i++] = slice;
1844                data[i++] = (unsigned int)ss->tx.pkt_start;
1845                data[i++] = (unsigned int)ss->tx.pkt_done;
1846                data[i++] = (unsigned int)ss->tx.req;
1847                data[i++] = (unsigned int)ss->tx.done;
1848                data[i++] = (unsigned int)ss->rx_small.cnt;
1849                data[i++] = (unsigned int)ss->rx_big.cnt;
1850                data[i++] = (unsigned int)ss->tx.wake_queue;
1851                data[i++] = (unsigned int)ss->tx.stop_queue;
1852                data[i++] = (unsigned int)ss->tx.linearized;
1853        }
1854}
1855
1856static void myri10ge_set_msglevel(struct net_device *netdev, u32 value)
1857{
1858        struct myri10ge_priv *mgp = netdev_priv(netdev);
1859        mgp->msg_enable = value;
1860}
1861
1862static u32 myri10ge_get_msglevel(struct net_device *netdev)
1863{
1864        struct myri10ge_priv *mgp = netdev_priv(netdev);
1865        return mgp->msg_enable;
1866}
1867
1868/*
1869 * Use a low-level command to change the LED behavior. Rather than
1870 * blinking (which is the normal case), when identify is used, the
1871 * yellow LED turns solid.
1872 */
1873static int myri10ge_led(struct myri10ge_priv *mgp, int on)
1874{
1875        struct mcp_gen_header *hdr;
1876        struct device *dev = &mgp->pdev->dev;
1877        size_t hdr_off, pattern_off, hdr_len;
1878        u32 pattern = 0xfffffffe;
1879
1880        /* find running firmware header */
1881        hdr_off = swab32(readl(mgp->sram + MCP_HEADER_PTR_OFFSET));
1882        if ((hdr_off & 3) || hdr_off + sizeof(*hdr) > mgp->sram_size) {
1883                dev_err(dev, "Running firmware has bad header offset (%d)\n",
1884                        (int)hdr_off);
1885                return -EIO;
1886        }
1887        hdr_len = swab32(readl(mgp->sram + hdr_off +
1888                               offsetof(struct mcp_gen_header, header_length)));
1889        pattern_off = hdr_off + offsetof(struct mcp_gen_header, led_pattern);
1890        if (pattern_off >= (hdr_len + hdr_off)) {
1891                dev_info(dev, "Firmware does not support LED identification\n");
1892                return -EINVAL;
1893        }
1894        if (!on)
1895                pattern = swab32(readl(mgp->sram + pattern_off + 4));
1896        writel(swab32(pattern), mgp->sram + pattern_off);
1897        return 0;
1898}
1899
1900static int
1901myri10ge_phys_id(struct net_device *netdev, enum ethtool_phys_id_state state)
1902{
1903        struct myri10ge_priv *mgp = netdev_priv(netdev);
1904        int rc;
1905
1906        switch (state) {
1907        case ETHTOOL_ID_ACTIVE:
1908                rc = myri10ge_led(mgp, 1);
1909                break;
1910
1911        case ETHTOOL_ID_INACTIVE:
1912                rc =  myri10ge_led(mgp, 0);
1913                break;
1914
1915        default:
1916                rc = -EINVAL;
1917        }
1918
1919        return rc;
1920}
1921
1922static const struct ethtool_ops myri10ge_ethtool_ops = {
1923        .get_drvinfo = myri10ge_get_drvinfo,
1924        .get_coalesce = myri10ge_get_coalesce,
1925        .set_coalesce = myri10ge_set_coalesce,
1926        .get_pauseparam = myri10ge_get_pauseparam,
1927        .set_pauseparam = myri10ge_set_pauseparam,
1928        .get_ringparam = myri10ge_get_ringparam,
1929        .get_link = ethtool_op_get_link,
1930        .get_strings = myri10ge_get_strings,
1931        .get_sset_count = myri10ge_get_sset_count,
1932        .get_ethtool_stats = myri10ge_get_ethtool_stats,
1933        .set_msglevel = myri10ge_set_msglevel,
1934        .get_msglevel = myri10ge_get_msglevel,
1935        .set_phys_id = myri10ge_phys_id,
1936        .get_link_ksettings = myri10ge_get_link_ksettings,
1937};
1938
1939static int myri10ge_allocate_rings(struct myri10ge_slice_state *ss)
1940{
1941        struct myri10ge_priv *mgp = ss->mgp;
1942        struct myri10ge_cmd cmd;
1943        struct net_device *dev = mgp->dev;
1944        int tx_ring_size, rx_ring_size;
1945        int tx_ring_entries, rx_ring_entries;
1946        int i, slice, status;
1947        size_t bytes;
1948
1949        /* get ring sizes */
1950        slice = ss - mgp->ss;
1951        cmd.data0 = slice;
1952        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SEND_RING_SIZE, &cmd, 0);
1953        tx_ring_size = cmd.data0;
1954        cmd.data0 = slice;
1955        status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_RX_RING_SIZE, &cmd, 0);
1956        if (status != 0)
1957                return status;
1958        rx_ring_size = cmd.data0;
1959
1960        tx_ring_entries = tx_ring_size / sizeof(struct mcp_kreq_ether_send);
1961        rx_ring_entries = rx_ring_size / sizeof(struct mcp_dma_addr);
1962        ss->tx.mask = tx_ring_entries - 1;
1963        ss->rx_small.mask = ss->rx_big.mask = rx_ring_entries - 1;
1964
1965        status = -ENOMEM;
1966
1967        /* allocate the host shadow rings */
1968
1969        bytes = 8 + (MYRI10GE_MAX_SEND_DESC_TSO + 4)
1970            * sizeof(*ss->tx.req_list);
1971        ss->tx.req_bytes = kzalloc(bytes, GFP_KERNEL);
1972        if (ss->tx.req_bytes == NULL)
1973                goto abort_with_nothing;
1974
1975        /* ensure req_list entries are aligned to 8 bytes */
1976        ss->tx.req_list = (struct mcp_kreq_ether_send *)
1977            ALIGN((unsigned long)ss->tx.req_bytes, 8);
1978        ss->tx.queue_active = 0;
1979
1980        bytes = rx_ring_entries * sizeof(*ss->rx_small.shadow);
1981        ss->rx_small.shadow = kzalloc(bytes, GFP_KERNEL);
1982        if (ss->rx_small.shadow == NULL)
1983                goto abort_with_tx_req_bytes;
1984
1985        bytes = rx_ring_entries * sizeof(*ss->rx_big.shadow);
1986        ss->rx_big.shadow = kzalloc(bytes, GFP_KERNEL);
1987        if (ss->rx_big.shadow == NULL)
1988                goto abort_with_rx_small_shadow;
1989
1990        /* allocate the host info rings */
1991
1992        bytes = tx_ring_entries * sizeof(*ss->tx.info);
1993        ss->tx.info = kzalloc(bytes, GFP_KERNEL);
1994        if (ss->tx.info == NULL)
1995                goto abort_with_rx_big_shadow;
1996
1997        bytes = rx_ring_entries * sizeof(*ss->rx_small.info);
1998        ss->rx_small.info = kzalloc(bytes, GFP_KERNEL);
1999        if (ss->rx_small.info == NULL)
2000                goto abort_with_tx_info;
2001
2002        bytes = rx_ring_entries * sizeof(*ss->rx_big.info);
2003        ss->rx_big.info = kzalloc(bytes, GFP_KERNEL);
2004        if (ss->rx_big.info == NULL)
2005                goto abort_with_rx_small_info;
2006
2007        /* Fill the receive rings */
2008        ss->rx_big.cnt = 0;
2009        ss->rx_small.cnt = 0;
2010        ss->rx_big.fill_cnt = 0;
2011        ss->rx_small.fill_cnt = 0;
2012        ss->rx_small.page_offset = MYRI10GE_ALLOC_SIZE;
2013        ss->rx_big.page_offset = MYRI10GE_ALLOC_SIZE;
2014        ss->rx_small.watchdog_needed = 0;
2015        ss->rx_big.watchdog_needed = 0;
2016        if (mgp->small_bytes == 0) {
2017                ss->rx_small.fill_cnt = ss->rx_small.mask + 1;
2018        } else {
2019                myri10ge_alloc_rx_pages(mgp, &ss->rx_small,
2020                                        mgp->small_bytes + MXGEFW_PAD, 0);
2021        }
2022
2023        if (ss->rx_small.fill_cnt < ss->rx_small.mask + 1) {
2024                netdev_err(dev, "slice-%d: alloced only %d small bufs\n",
2025                           slice, ss->rx_small.fill_cnt);
2026                goto abort_with_rx_small_ring;
2027        }
2028
2029        myri10ge_alloc_rx_pages(mgp, &ss->rx_big, mgp->big_bytes, 0);
2030        if (ss->rx_big.fill_cnt < ss->rx_big.mask + 1) {
2031                netdev_err(dev, "slice-%d: alloced only %d big bufs\n",
2032                           slice, ss->rx_big.fill_cnt);
2033                goto abort_with_rx_big_ring;
2034        }
2035
2036        return 0;
2037
2038abort_with_rx_big_ring:
2039        for (i = ss->rx_big.cnt; i < ss->rx_big.fill_cnt; i++) {
2040                int idx = i & ss->rx_big.mask;
2041                myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_big.info[idx],
2042                                       mgp->big_bytes);
2043                put_page(ss->rx_big.info[idx].page);
2044        }
2045
2046abort_with_rx_small_ring:
2047        if (mgp->small_bytes == 0)
2048                ss->rx_small.fill_cnt = ss->rx_small.cnt;
2049        for (i = ss->rx_small.cnt; i < ss->rx_small.fill_cnt; i++) {
2050                int idx = i & ss->rx_small.mask;
2051                myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_small.info[idx],
2052                                       mgp->small_bytes + MXGEFW_PAD);
2053                put_page(ss->rx_small.info[idx].page);
2054        }
2055
2056        kfree(ss->rx_big.info);
2057
2058abort_with_rx_small_info:
2059        kfree(ss->rx_small.info);
2060
2061abort_with_tx_info:
2062        kfree(ss->tx.info);
2063
2064abort_with_rx_big_shadow:
2065        kfree(ss->rx_big.shadow);
2066
2067abort_with_rx_small_shadow:
2068        kfree(ss->rx_small.shadow);
2069
2070abort_with_tx_req_bytes:
2071        kfree(ss->tx.req_bytes);
2072        ss->tx.req_bytes = NULL;
2073        ss->tx.req_list = NULL;
2074
2075abort_with_nothing:
2076        return status;
2077}
2078
2079static void myri10ge_free_rings(struct myri10ge_slice_state *ss)
2080{
2081        struct myri10ge_priv *mgp = ss->mgp;
2082        struct sk_buff *skb;
2083        struct myri10ge_tx_buf *tx;
2084        int i, len, idx;
2085
2086        /* If not allocated, skip it */
2087        if (ss->tx.req_list == NULL)
2088                return;
2089
2090        for (i = ss->rx_big.cnt; i < ss->rx_big.fill_cnt; i++) {
2091                idx = i & ss->rx_big.mask;
2092                if (i == ss->rx_big.fill_cnt - 1)
2093                        ss->rx_big.info[idx].page_offset = MYRI10GE_ALLOC_SIZE;
2094                myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_big.info[idx],
2095                                       mgp->big_bytes);
2096                put_page(ss->rx_big.info[idx].page);
2097        }
2098
2099        if (mgp->small_bytes == 0)
2100                ss->rx_small.fill_cnt = ss->rx_small.cnt;
2101        for (i = ss->rx_small.cnt; i < ss->rx_small.fill_cnt; i++) {
2102                idx = i & ss->rx_small.mask;
2103                if (i == ss->rx_small.fill_cnt - 1)
2104                        ss->rx_small.info[idx].page_offset =
2105                            MYRI10GE_ALLOC_SIZE;
2106                myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_small.info[idx],
2107                                       mgp->small_bytes + MXGEFW_PAD);
2108                put_page(ss->rx_small.info[idx].page);
2109        }
2110        tx = &ss->tx;
2111        while (tx->done != tx->req) {
2112                idx = tx->done & tx->mask;
2113                skb = tx->info[idx].skb;
2114
2115                /* Mark as free */
2116                tx->info[idx].skb = NULL;
2117                tx->done++;
2118                len = dma_unmap_len(&tx->info[idx], len);
2119                dma_unmap_len_set(&tx->info[idx], len, 0);
2120                if (skb) {
2121                        ss->stats.tx_dropped++;
2122                        dev_kfree_skb_any(skb);
2123                        if (len)
2124                                pci_unmap_single(mgp->pdev,
2125                                                 dma_unmap_addr(&tx->info[idx],
2126                                                                bus), len,
2127                                                 PCI_DMA_TODEVICE);
2128                } else {
2129                        if (len)
2130                                pci_unmap_page(mgp->pdev,
2131                                               dma_unmap_addr(&tx->info[idx],
2132                                                              bus), len,
2133                                               PCI_DMA_TODEVICE);
2134                }
2135        }
2136        kfree(ss->rx_big.info);
2137
2138        kfree(ss->rx_small.info);
2139
2140        kfree(ss->tx.info);
2141
2142        kfree(ss->rx_big.shadow);
2143
2144        kfree(ss->rx_small.shadow);
2145
2146        kfree(ss->tx.req_bytes);
2147        ss->tx.req_bytes = NULL;
2148        ss->tx.req_list = NULL;
2149}
2150
2151static int myri10ge_request_irq(struct myri10ge_priv *mgp)
2152{
2153        struct pci_dev *pdev = mgp->pdev;
2154        struct myri10ge_slice_state *ss;
2155        struct net_device *netdev = mgp->dev;
2156        int i;
2157        int status;
2158
2159        mgp->msi_enabled = 0;
2160        mgp->msix_enabled = 0;
2161        status = 0;
2162        if (myri10ge_msi) {
2163                if (mgp->num_slices > 1) {
2164                        status = pci_enable_msix_range(pdev, mgp->msix_vectors,
2165                                        mgp->num_slices, mgp->num_slices);
2166                        if (status < 0) {
2167                                dev_err(&pdev->dev,
2168                                        "Error %d setting up MSI-X\n", status);
2169                                return status;
2170                        }
2171                        mgp->msix_enabled = 1;
2172                }
2173                if (mgp->msix_enabled == 0) {
2174                        status = pci_enable_msi(pdev);
2175                        if (status != 0) {
2176                                dev_err(&pdev->dev,
2177                                        "Error %d setting up MSI; falling back to xPIC\n",
2178                                        status);
2179                        } else {
2180                                mgp->msi_enabled = 1;
2181                        }
2182                }
2183        }
2184        if (mgp->msix_enabled) {
2185                for (i = 0; i < mgp->num_slices; i++) {
2186                        ss = &mgp->ss[i];
2187                        snprintf(ss->irq_desc, sizeof(ss->irq_desc),
2188                                 "%s:slice-%d", netdev->name, i);
2189                        status = request_irq(mgp->msix_vectors[i].vector,
2190                                             myri10ge_intr, 0, ss->irq_desc,
2191                                             ss);
2192                        if (status != 0) {
2193                                dev_err(&pdev->dev,
2194                                        "slice %d failed to allocate IRQ\n", i);
2195                                i--;
2196                                while (i >= 0) {
2197                                        free_irq(mgp->msix_vectors[i].vector,
2198                                                 &mgp->ss[i]);
2199                                        i--;
2200                                }
2201                                pci_disable_msix(pdev);
2202                                return status;
2203                        }
2204                }
2205        } else {
2206                status = request_irq(pdev->irq, myri10ge_intr, IRQF_SHARED,
2207                                     mgp->dev->name, &mgp->ss[0]);
2208                if (status != 0) {
2209                        dev_err(&pdev->dev, "failed to allocate IRQ\n");
2210                        if (mgp->msi_enabled)
2211                                pci_disable_msi(pdev);
2212                }
2213        }
2214        return status;
2215}
2216
2217static void myri10ge_free_irq(struct myri10ge_priv *mgp)
2218{
2219        struct pci_dev *pdev = mgp->pdev;
2220        int i;
2221
2222        if (mgp->msix_enabled) {
2223                for (i = 0; i < mgp->num_slices; i++)
2224                        free_irq(mgp->msix_vectors[i].vector, &mgp->ss[i]);
2225        } else {
2226                free_irq(pdev->irq, &mgp->ss[0]);
2227        }
2228        if (mgp->msi_enabled)
2229                pci_disable_msi(pdev);
2230        if (mgp->msix_enabled)
2231                pci_disable_msix(pdev);
2232}
2233
2234static int myri10ge_get_txrx(struct myri10ge_priv *mgp, int slice)
2235{
2236        struct myri10ge_cmd cmd;
2237        struct myri10ge_slice_state *ss;
2238        int status;
2239
2240        ss = &mgp->ss[slice];
2241        status = 0;
2242        if (slice == 0 || (mgp->dev->real_num_tx_queues > 1)) {
2243                cmd.data0 = slice;
2244                status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SEND_OFFSET,
2245                                           &cmd, 0);
2246                ss->tx.lanai = (struct mcp_kreq_ether_send __iomem *)
2247                    (mgp->sram + cmd.data0);
2248        }
2249        cmd.data0 = slice;
2250        status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SMALL_RX_OFFSET,
2251                                    &cmd, 0);
2252        ss->rx_small.lanai = (struct mcp_kreq_ether_recv __iomem *)
2253            (mgp->sram + cmd.data0);
2254
2255        cmd.data0 = slice;
2256        status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_BIG_RX_OFFSET, &cmd, 0);
2257        ss->rx_big.lanai = (struct mcp_kreq_ether_recv __iomem *)
2258            (mgp->sram + cmd.data0);
2259
2260        ss->tx.send_go = (__iomem __be32 *)
2261            (mgp->sram + MXGEFW_ETH_SEND_GO + 64 * slice);
2262        ss->tx.send_stop = (__iomem __be32 *)
2263            (mgp->sram + MXGEFW_ETH_SEND_STOP + 64 * slice);
2264        return status;
2265
2266}
2267
2268static int myri10ge_set_stats(struct myri10ge_priv *mgp, int slice)
2269{
2270        struct myri10ge_cmd cmd;
2271        struct myri10ge_slice_state *ss;
2272        int status;
2273
2274        ss = &mgp->ss[slice];
2275        cmd.data0 = MYRI10GE_LOWPART_TO_U32(ss->fw_stats_bus);
2276        cmd.data1 = MYRI10GE_HIGHPART_TO_U32(ss->fw_stats_bus);
2277        cmd.data2 = sizeof(struct mcp_irq_data) | (slice << 16);
2278        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_STATS_DMA_V2, &cmd, 0);
2279        if (status == -ENOSYS) {
2280                dma_addr_t bus = ss->fw_stats_bus;
2281                if (slice != 0)
2282                        return -EINVAL;
2283                bus += offsetof(struct mcp_irq_data, send_done_count);
2284                cmd.data0 = MYRI10GE_LOWPART_TO_U32(bus);
2285                cmd.data1 = MYRI10GE_HIGHPART_TO_U32(bus);
2286                status = myri10ge_send_cmd(mgp,
2287                                           MXGEFW_CMD_SET_STATS_DMA_OBSOLETE,
2288                                           &cmd, 0);
2289                /* Firmware cannot support multicast without STATS_DMA_V2 */
2290                mgp->fw_multicast_support = 0;
2291        } else {
2292                mgp->fw_multicast_support = 1;
2293        }
2294        return 0;
2295}
2296
2297static int myri10ge_open(struct net_device *dev)
2298{
2299        struct myri10ge_slice_state *ss;
2300        struct myri10ge_priv *mgp = netdev_priv(dev);
2301        struct myri10ge_cmd cmd;
2302        int i, status, big_pow2, slice;
2303        u8 __iomem *itable;
2304
2305        if (mgp->running != MYRI10GE_ETH_STOPPED)
2306                return -EBUSY;
2307
2308        mgp->running = MYRI10GE_ETH_STARTING;
2309        status = myri10ge_reset(mgp);
2310        if (status != 0) {
2311                netdev_err(dev, "failed reset\n");
2312                goto abort_with_nothing;
2313        }
2314
2315        if (mgp->num_slices > 1) {
2316                cmd.data0 = mgp->num_slices;
2317                cmd.data1 = MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE;
2318                if (mgp->dev->real_num_tx_queues > 1)
2319                        cmd.data1 |= MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES;
2320                status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ENABLE_RSS_QUEUES,
2321                                           &cmd, 0);
2322                if (status != 0) {
2323                        netdev_err(dev, "failed to set number of slices\n");
2324                        goto abort_with_nothing;
2325                }
2326                /* setup the indirection table */
2327                cmd.data0 = mgp->num_slices;
2328                status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_TABLE_SIZE,
2329                                           &cmd, 0);
2330
2331                status |= myri10ge_send_cmd(mgp,
2332                                            MXGEFW_CMD_GET_RSS_TABLE_OFFSET,
2333                                            &cmd, 0);
2334                if (status != 0) {
2335                        netdev_err(dev, "failed to setup rss tables\n");
2336                        goto abort_with_nothing;
2337                }
2338
2339                /* just enable an identity mapping */
2340                itable = mgp->sram + cmd.data0;
2341                for (i = 0; i < mgp->num_slices; i++)
2342                        __raw_writeb(i, &itable[i]);
2343
2344                cmd.data0 = 1;
2345                cmd.data1 = myri10ge_rss_hash;
2346                status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_ENABLE,
2347                                           &cmd, 0);
2348                if (status != 0) {
2349                        netdev_err(dev, "failed to enable slices\n");
2350                        goto abort_with_nothing;
2351                }
2352        }
2353
2354        status = myri10ge_request_irq(mgp);
2355        if (status != 0)
2356                goto abort_with_nothing;
2357
2358        /* decide what small buffer size to use.  For good TCP rx
2359         * performance, it is important to not receive 1514 byte
2360         * frames into jumbo buffers, as it confuses the socket buffer
2361         * accounting code, leading to drops and erratic performance.
2362         */
2363
2364        if (dev->mtu <= ETH_DATA_LEN)
2365                /* enough for a TCP header */
2366                mgp->small_bytes = (128 > SMP_CACHE_BYTES)
2367                    ? (128 - MXGEFW_PAD)
2368                    : (SMP_CACHE_BYTES - MXGEFW_PAD);
2369        else
2370                /* enough for a vlan encapsulated ETH_DATA_LEN frame */
2371                mgp->small_bytes = VLAN_ETH_FRAME_LEN;
2372
2373        /* Override the small buffer size? */
2374        if (myri10ge_small_bytes >= 0)
2375                mgp->small_bytes = myri10ge_small_bytes;
2376
2377        /* Firmware needs the big buff size as a power of 2.  Lie and
2378         * tell him the buffer is larger, because we only use 1
2379         * buffer/pkt, and the mtu will prevent overruns.
2380         */
2381        big_pow2 = dev->mtu + ETH_HLEN + VLAN_HLEN + MXGEFW_PAD;
2382        if (big_pow2 < MYRI10GE_ALLOC_SIZE / 2) {
2383                while (!is_power_of_2(big_pow2))
2384                        big_pow2++;
2385                mgp->big_bytes = dev->mtu + ETH_HLEN + VLAN_HLEN + MXGEFW_PAD;
2386        } else {
2387                big_pow2 = MYRI10GE_ALLOC_SIZE;
2388                mgp->big_bytes = big_pow2;
2389        }
2390
2391        /* setup the per-slice data structures */
2392        for (slice = 0; slice < mgp->num_slices; slice++) {
2393                ss = &mgp->ss[slice];
2394
2395                status = myri10ge_get_txrx(mgp, slice);
2396                if (status != 0) {
2397                        netdev_err(dev, "failed to get ring sizes or locations\n");
2398                        goto abort_with_rings;
2399                }
2400                status = myri10ge_allocate_rings(ss);
2401                if (status != 0)
2402                        goto abort_with_rings;
2403
2404                /* only firmware which supports multiple TX queues
2405                 * supports setting up the tx stats on non-zero
2406                 * slices */
2407                if (slice == 0 || mgp->dev->real_num_tx_queues > 1)
2408                        status = myri10ge_set_stats(mgp, slice);
2409                if (status) {
2410                        netdev_err(dev, "Couldn't set stats DMA\n");
2411                        goto abort_with_rings;
2412                }
2413
2414                /* must happen prior to any irq */
2415                napi_enable(&(ss)->napi);
2416        }
2417
2418        /* now give firmware buffers sizes, and MTU */
2419        cmd.data0 = dev->mtu + ETH_HLEN + VLAN_HLEN;
2420        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_MTU, &cmd, 0);
2421        cmd.data0 = mgp->small_bytes;
2422        status |=
2423            myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_SMALL_BUFFER_SIZE, &cmd, 0);
2424        cmd.data0 = big_pow2;
2425        status |=
2426            myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_BIG_BUFFER_SIZE, &cmd, 0);
2427        if (status) {
2428                netdev_err(dev, "Couldn't set buffer sizes\n");
2429                goto abort_with_rings;
2430        }
2431
2432        /*
2433         * Set Linux style TSO mode; this is needed only on newer
2434         *  firmware versions.  Older versions default to Linux
2435         *  style TSO
2436         */
2437        cmd.data0 = 0;
2438        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_TSO_MODE, &cmd, 0);
2439        if (status && status != -ENOSYS) {
2440                netdev_err(dev, "Couldn't set TSO mode\n");
2441                goto abort_with_rings;
2442        }
2443
2444        mgp->link_state = ~0U;
2445        mgp->rdma_tags_available = 15;
2446
2447        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_UP, &cmd, 0);
2448        if (status) {
2449                netdev_err(dev, "Couldn't bring up link\n");
2450                goto abort_with_rings;
2451        }
2452
2453        mgp->running = MYRI10GE_ETH_RUNNING;
2454        mgp->watchdog_timer.expires = jiffies + myri10ge_watchdog_timeout * HZ;
2455        add_timer(&mgp->watchdog_timer);
2456        netif_tx_wake_all_queues(dev);
2457
2458        return 0;
2459
2460abort_with_rings:
2461        while (slice) {
2462                slice--;
2463                napi_disable(&mgp->ss[slice].napi);
2464        }
2465        for (i = 0; i < mgp->num_slices; i++)
2466                myri10ge_free_rings(&mgp->ss[i]);
2467
2468        myri10ge_free_irq(mgp);
2469
2470abort_with_nothing:
2471        mgp->running = MYRI10GE_ETH_STOPPED;
2472        return -ENOMEM;
2473}
2474
2475static int myri10ge_close(struct net_device *dev)
2476{
2477        struct myri10ge_priv *mgp = netdev_priv(dev);
2478        struct myri10ge_cmd cmd;
2479        int status, old_down_cnt;
2480        int i;
2481
2482        if (mgp->running != MYRI10GE_ETH_RUNNING)
2483                return 0;
2484
2485        if (mgp->ss[0].tx.req_bytes == NULL)
2486                return 0;
2487
2488        del_timer_sync(&mgp->watchdog_timer);
2489        mgp->running = MYRI10GE_ETH_STOPPING;
2490        for (i = 0; i < mgp->num_slices; i++)
2491                napi_disable(&mgp->ss[i].napi);
2492
2493        netif_carrier_off(dev);
2494
2495        netif_tx_stop_all_queues(dev);
2496        if (mgp->rebooted == 0) {
2497                old_down_cnt = mgp->down_cnt;
2498                mb();
2499                status =
2500                    myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_DOWN, &cmd, 0);
2501                if (status)
2502                        netdev_err(dev, "Couldn't bring down link\n");
2503
2504                wait_event_timeout(mgp->down_wq, old_down_cnt != mgp->down_cnt,
2505                                   HZ);
2506                if (old_down_cnt == mgp->down_cnt)
2507                        netdev_err(dev, "never got down irq\n");
2508        }
2509        netif_tx_disable(dev);
2510        myri10ge_free_irq(mgp);
2511        for (i = 0; i < mgp->num_slices; i++)
2512                myri10ge_free_rings(&mgp->ss[i]);
2513
2514        mgp->running = MYRI10GE_ETH_STOPPED;
2515        return 0;
2516}
2517
2518/* copy an array of struct mcp_kreq_ether_send's to the mcp.  Copy
2519 * backwards one at a time and handle ring wraps */
2520
2521static inline void
2522myri10ge_submit_req_backwards(struct myri10ge_tx_buf *tx,
2523                              struct mcp_kreq_ether_send *src, int cnt)
2524{
2525        int idx, starting_slot;
2526        starting_slot = tx->req;
2527        while (cnt > 1) {
2528                cnt--;
2529                idx = (starting_slot + cnt) & tx->mask;
2530                myri10ge_pio_copy(&tx->lanai[idx], &src[cnt], sizeof(*src));
2531                mb();
2532        }
2533}
2534
2535/*
2536 * copy an array of struct mcp_kreq_ether_send's to the mcp.  Copy
2537 * at most 32 bytes at a time, so as to avoid involving the software
2538 * pio handler in the nic.   We re-write the first segment's flags
2539 * to mark them valid only after writing the entire chain.
2540 */
2541
2542static inline void
2543myri10ge_submit_req(struct myri10ge_tx_buf *tx, struct mcp_kreq_ether_send *src,
2544                    int cnt)
2545{
2546        int idx, i;
2547        struct mcp_kreq_ether_send __iomem *dstp, *dst;
2548        struct mcp_kreq_ether_send *srcp;
2549        u8 last_flags;
2550
2551        idx = tx->req & tx->mask;
2552
2553        last_flags = src->flags;
2554        src->flags = 0;
2555        mb();
2556        dst = dstp = &tx->lanai[idx];
2557        srcp = src;
2558
2559        if ((idx + cnt) < tx->mask) {
2560                for (i = 0; i < (cnt - 1); i += 2) {
2561                        myri10ge_pio_copy(dstp, srcp, 2 * sizeof(*src));
2562                        mb();   /* force write every 32 bytes */
2563                        srcp += 2;
2564                        dstp += 2;
2565                }
2566        } else {
2567                /* submit all but the first request, and ensure
2568                 * that it is submitted below */
2569                myri10ge_submit_req_backwards(tx, src, cnt);
2570                i = 0;
2571        }
2572        if (i < cnt) {
2573                /* submit the first request */
2574                myri10ge_pio_copy(dstp, srcp, sizeof(*src));
2575                mb();           /* barrier before setting valid flag */
2576        }
2577
2578        /* re-write the last 32-bits with the valid flags */
2579        src->flags = last_flags;
2580        put_be32(*((__be32 *) src + 3), (__be32 __iomem *) dst + 3);
2581        tx->req += cnt;
2582        mb();
2583}
2584
2585static void myri10ge_unmap_tx_dma(struct myri10ge_priv *mgp,
2586                                  struct myri10ge_tx_buf *tx, int idx)
2587{
2588        unsigned int len;
2589        int last_idx;
2590
2591        /* Free any DMA resources we've alloced and clear out the skb slot */
2592        last_idx = (idx + 1) & tx->mask;
2593        idx = tx->req & tx->mask;
2594        do {
2595                len = dma_unmap_len(&tx->info[idx], len);
2596                if (len) {
2597                        if (tx->info[idx].skb != NULL)
2598                                pci_unmap_single(mgp->pdev,
2599                                                 dma_unmap_addr(&tx->info[idx],
2600                                                                bus), len,
2601                                                 PCI_DMA_TODEVICE);
2602                        else
2603                                pci_unmap_page(mgp->pdev,
2604                                               dma_unmap_addr(&tx->info[idx],
2605                                                              bus), len,
2606                                               PCI_DMA_TODEVICE);
2607                        dma_unmap_len_set(&tx->info[idx], len, 0);
2608                        tx->info[idx].skb = NULL;
2609                }
2610                idx = (idx + 1) & tx->mask;
2611        } while (idx != last_idx);
2612}
2613
2614/*
2615 * Transmit a packet.  We need to split the packet so that a single
2616 * segment does not cross myri10ge->tx_boundary, so this makes segment
2617 * counting tricky.  So rather than try to count segments up front, we
2618 * just give up if there are too few segments to hold a reasonably
2619 * fragmented packet currently available.  If we run
2620 * out of segments while preparing a packet for DMA, we just linearize
2621 * it and try again.
2622 */
2623
2624static netdev_tx_t myri10ge_xmit(struct sk_buff *skb,
2625                                       struct net_device *dev)
2626{
2627        struct myri10ge_priv *mgp = netdev_priv(dev);
2628        struct myri10ge_slice_state *ss;
2629        struct mcp_kreq_ether_send *req;
2630        struct myri10ge_tx_buf *tx;
2631        struct skb_frag_struct *frag;
2632        struct netdev_queue *netdev_queue;
2633        dma_addr_t bus;
2634        u32 low;
2635        __be32 high_swapped;
2636        unsigned int len;
2637        int idx, avail, frag_cnt, frag_idx, count, mss, max_segments;
2638        u16 pseudo_hdr_offset, cksum_offset, queue;
2639        int cum_len, seglen, boundary, rdma_count;
2640        u8 flags, odd_flag;
2641
2642        queue = skb_get_queue_mapping(skb);
2643        ss = &mgp->ss[queue];
2644        netdev_queue = netdev_get_tx_queue(mgp->dev, queue);
2645        tx = &ss->tx;
2646
2647again:
2648        req = tx->req_list;
2649        avail = tx->mask - 1 - (tx->req - tx->done);
2650
2651        mss = 0;
2652        max_segments = MXGEFW_MAX_SEND_DESC;
2653
2654        if (skb_is_gso(skb)) {
2655                mss = skb_shinfo(skb)->gso_size;
2656                max_segments = MYRI10GE_MAX_SEND_DESC_TSO;
2657        }
2658
2659        if ((unlikely(avail < max_segments))) {
2660                /* we are out of transmit resources */
2661                tx->stop_queue++;
2662                netif_tx_stop_queue(netdev_queue);
2663                return NETDEV_TX_BUSY;
2664        }
2665
2666        /* Setup checksum offloading, if needed */
2667        cksum_offset = 0;
2668        pseudo_hdr_offset = 0;
2669        odd_flag = 0;
2670        flags = (MXGEFW_FLAGS_NO_TSO | MXGEFW_FLAGS_FIRST);
2671        if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
2672                cksum_offset = skb_checksum_start_offset(skb);
2673                pseudo_hdr_offset = cksum_offset + skb->csum_offset;
2674                /* If the headers are excessively large, then we must
2675                 * fall back to a software checksum */
2676                if (unlikely(!mss && (cksum_offset > 255 ||
2677                                      pseudo_hdr_offset > 127))) {
2678                        if (skb_checksum_help(skb))
2679                                goto drop;
2680                        cksum_offset = 0;
2681                        pseudo_hdr_offset = 0;
2682                } else {
2683                        odd_flag = MXGEFW_FLAGS_ALIGN_ODD;
2684                        flags |= MXGEFW_FLAGS_CKSUM;
2685                }
2686        }
2687
2688        cum_len = 0;
2689
2690        if (mss) {              /* TSO */
2691                /* this removes any CKSUM flag from before */
2692                flags = (MXGEFW_FLAGS_TSO_HDR | MXGEFW_FLAGS_FIRST);
2693
2694                /* negative cum_len signifies to the
2695                 * send loop that we are still in the
2696                 * header portion of the TSO packet.
2697                 * TSO header can be at most 1KB long */
2698                cum_len = -(skb_transport_offset(skb) + tcp_hdrlen(skb));
2699
2700                /* for IPv6 TSO, the checksum offset stores the
2701                 * TCP header length, to save the firmware from
2702                 * the need to parse the headers */
2703                if (skb_is_gso_v6(skb)) {
2704                        cksum_offset = tcp_hdrlen(skb);
2705                        /* Can only handle headers <= max_tso6 long */
2706                        if (unlikely(-cum_len > mgp->max_tso6))
2707                                return myri10ge_sw_tso(skb, dev);
2708                }
2709                /* for TSO, pseudo_hdr_offset holds mss.
2710                 * The firmware figures out where to put
2711                 * the checksum by parsing the header. */
2712                pseudo_hdr_offset = mss;
2713        } else
2714                /* Mark small packets, and pad out tiny packets */
2715        if (skb->len <= MXGEFW_SEND_SMALL_SIZE) {
2716                flags |= MXGEFW_FLAGS_SMALL;
2717
2718                /* pad frames to at least ETH_ZLEN bytes */
2719                if (eth_skb_pad(skb)) {
2720                        /* The packet is gone, so we must
2721                         * return 0 */
2722                        ss->stats.tx_dropped += 1;
2723                        return NETDEV_TX_OK;
2724                }
2725        }
2726
2727        /* map the skb for DMA */
2728        len = skb_headlen(skb);
2729        bus = pci_map_single(mgp->pdev, skb->data, len, PCI_DMA_TODEVICE);
2730        if (unlikely(pci_dma_mapping_error(mgp->pdev, bus)))
2731                goto drop;
2732
2733        idx = tx->req & tx->mask;
2734        tx->info[idx].skb = skb;
2735        dma_unmap_addr_set(&tx->info[idx], bus, bus);
2736        dma_unmap_len_set(&tx->info[idx], len, len);
2737
2738        frag_cnt = skb_shinfo(skb)->nr_frags;
2739        frag_idx = 0;
2740        count = 0;
2741        rdma_count = 0;
2742
2743        /* "rdma_count" is the number of RDMAs belonging to the
2744         * current packet BEFORE the current send request. For
2745         * non-TSO packets, this is equal to "count".
2746         * For TSO packets, rdma_count needs to be reset
2747         * to 0 after a segment cut.
2748         *
2749         * The rdma_count field of the send request is
2750         * the number of RDMAs of the packet starting at
2751         * that request. For TSO send requests with one ore more cuts
2752         * in the middle, this is the number of RDMAs starting
2753         * after the last cut in the request. All previous
2754         * segments before the last cut implicitly have 1 RDMA.
2755         *
2756         * Since the number of RDMAs is not known beforehand,
2757         * it must be filled-in retroactively - after each
2758         * segmentation cut or at the end of the entire packet.
2759         */
2760
2761        while (1) {
2762                /* Break the SKB or Fragment up into pieces which
2763                 * do not cross mgp->tx_boundary */
2764                low = MYRI10GE_LOWPART_TO_U32(bus);
2765                high_swapped = htonl(MYRI10GE_HIGHPART_TO_U32(bus));
2766                while (len) {
2767                        u8 flags_next;
2768                        int cum_len_next;
2769
2770                        if (unlikely(count == max_segments))
2771                                goto abort_linearize;
2772
2773                        boundary =
2774                            (low + mgp->tx_boundary) & ~(mgp->tx_boundary - 1);
2775                        seglen = boundary - low;
2776                        if (seglen > len)
2777                                seglen = len;
2778                        flags_next = flags & ~MXGEFW_FLAGS_FIRST;
2779                        cum_len_next = cum_len + seglen;
2780                        if (mss) {      /* TSO */
2781                                (req - rdma_count)->rdma_count = rdma_count + 1;
2782
2783                                if (likely(cum_len >= 0)) {     /* payload */
2784                                        int next_is_first, chop;
2785
2786                                        chop = (cum_len_next > mss);
2787                                        cum_len_next = cum_len_next % mss;
2788                                        next_is_first = (cum_len_next == 0);
2789                                        flags |= chop * MXGEFW_FLAGS_TSO_CHOP;
2790                                        flags_next |= next_is_first *
2791                                            MXGEFW_FLAGS_FIRST;
2792                                        rdma_count |= -(chop | next_is_first);
2793                                        rdma_count += chop & ~next_is_first;
2794                                } else if (likely(cum_len_next >= 0)) { /* header ends */
2795                                        int small;
2796
2797                                        rdma_count = -1;
2798                                        cum_len_next = 0;
2799                                        seglen = -cum_len;
2800                                        small = (mss <= MXGEFW_SEND_SMALL_SIZE);
2801                                        flags_next = MXGEFW_FLAGS_TSO_PLD |
2802                                            MXGEFW_FLAGS_FIRST |
2803                                            (small * MXGEFW_FLAGS_SMALL);
2804                                }
2805                        }
2806                        req->addr_high = high_swapped;
2807                        req->addr_low = htonl(low);
2808                        req->pseudo_hdr_offset = htons(pseudo_hdr_offset);
2809                        req->pad = 0;   /* complete solid 16-byte block; does this matter? */
2810                        req->rdma_count = 1;
2811                        req->length = htons(seglen);
2812                        req->cksum_offset = cksum_offset;
2813                        req->flags = flags | ((cum_len & 1) * odd_flag);
2814
2815                        low += seglen;
2816                        len -= seglen;
2817                        cum_len = cum_len_next;
2818                        flags = flags_next;
2819                        req++;
2820                        count++;
2821                        rdma_count++;
2822                        if (cksum_offset != 0 && !(mss && skb_is_gso_v6(skb))) {
2823                                if (unlikely(cksum_offset > seglen))
2824                                        cksum_offset -= seglen;
2825                                else
2826                                        cksum_offset = 0;
2827                        }
2828                }
2829                if (frag_idx == frag_cnt)
2830                        break;
2831
2832                /* map next fragment for DMA */
2833                frag = &skb_shinfo(skb)->frags[frag_idx];
2834                frag_idx++;
2835                len = skb_frag_size(frag);
2836                bus = skb_frag_dma_map(&mgp->pdev->dev, frag, 0, len,
2837                                       DMA_TO_DEVICE);
2838                if (unlikely(pci_dma_mapping_error(mgp->pdev, bus))) {
2839                        myri10ge_unmap_tx_dma(mgp, tx, idx);
2840                        goto drop;
2841                }
2842                idx = (count + tx->req) & tx->mask;
2843                dma_unmap_addr_set(&tx->info[idx], bus, bus);
2844                dma_unmap_len_set(&tx->info[idx], len, len);
2845        }
2846
2847        (req - rdma_count)->rdma_count = rdma_count;
2848        if (mss)
2849                do {
2850                        req--;
2851                        req->flags |= MXGEFW_FLAGS_TSO_LAST;
2852                } while (!(req->flags & (MXGEFW_FLAGS_TSO_CHOP |
2853                                         MXGEFW_FLAGS_FIRST)));
2854        idx = ((count - 1) + tx->req) & tx->mask;
2855        tx->info[idx].last = 1;
2856        myri10ge_submit_req(tx, tx->req_list, count);
2857        /* if using multiple tx queues, make sure NIC polls the
2858         * current slice */
2859        if ((mgp->dev->real_num_tx_queues > 1) && tx->queue_active == 0) {
2860                tx->queue_active = 1;
2861                put_be32(htonl(1), tx->send_go);
2862                mb();
2863        }
2864        tx->pkt_start++;
2865        if ((avail - count) < MXGEFW_MAX_SEND_DESC) {
2866                tx->stop_queue++;
2867                netif_tx_stop_queue(netdev_queue);
2868        }
2869        return NETDEV_TX_OK;
2870
2871abort_linearize:
2872        myri10ge_unmap_tx_dma(mgp, tx, idx);
2873
2874        if (skb_is_gso(skb)) {
2875                netdev_err(mgp->dev, "TSO but wanted to linearize?!?!?\n");
2876                goto drop;
2877        }
2878
2879        if (skb_linearize(skb))
2880                goto drop;
2881
2882        tx->linearized++;
2883        goto again;
2884
2885drop:
2886        dev_kfree_skb_any(skb);
2887        ss->stats.tx_dropped += 1;
2888        return NETDEV_TX_OK;
2889
2890}
2891
2892static netdev_tx_t myri10ge_sw_tso(struct sk_buff *skb,
2893                                         struct net_device *dev)
2894{
2895        struct sk_buff *segs, *curr;
2896        struct myri10ge_priv *mgp = netdev_priv(dev);
2897        struct myri10ge_slice_state *ss;
2898        netdev_tx_t status;
2899
2900        segs = skb_gso_segment(skb, dev->features & ~NETIF_F_TSO6);
2901        if (IS_ERR(segs))
2902                goto drop;
2903
2904        while (segs) {
2905                curr = segs;
2906                segs = segs->next;
2907                curr->next = NULL;
2908                status = myri10ge_xmit(curr, dev);
2909                if (status != 0) {
2910                        dev_kfree_skb_any(curr);
2911                        if (segs != NULL) {
2912                                curr = segs;
2913                                segs = segs->next;
2914                                curr->next = NULL;
2915                                dev_kfree_skb_any(segs);
2916                        }
2917                        goto drop;
2918                }
2919        }
2920        dev_kfree_skb_any(skb);
2921        return NETDEV_TX_OK;
2922
2923drop:
2924        ss = &mgp->ss[skb_get_queue_mapping(skb)];
2925        dev_kfree_skb_any(skb);
2926        ss->stats.tx_dropped += 1;
2927        return NETDEV_TX_OK;
2928}
2929
2930static void myri10ge_get_stats(struct net_device *dev,
2931                               struct rtnl_link_stats64 *stats)
2932{
2933        const struct myri10ge_priv *mgp = netdev_priv(dev);
2934        const struct myri10ge_slice_netstats *slice_stats;
2935        int i;
2936
2937        for (i = 0; i < mgp->num_slices; i++) {
2938                slice_stats = &mgp->ss[i].stats;
2939                stats->rx_packets += slice_stats->rx_packets;
2940                stats->tx_packets += slice_stats->tx_packets;
2941                stats->rx_bytes += slice_stats->rx_bytes;
2942                stats->tx_bytes += slice_stats->tx_bytes;
2943                stats->rx_dropped += slice_stats->rx_dropped;
2944                stats->tx_dropped += slice_stats->tx_dropped;
2945        }
2946}
2947
2948static void myri10ge_set_multicast_list(struct net_device *dev)
2949{
2950        struct myri10ge_priv *mgp = netdev_priv(dev);
2951        struct myri10ge_cmd cmd;
2952        struct netdev_hw_addr *ha;
2953        __be32 data[2] = { 0, 0 };
2954        int err;
2955
2956        /* can be called from atomic contexts,
2957         * pass 1 to force atomicity in myri10ge_send_cmd() */
2958        myri10ge_change_promisc(mgp, dev->flags & IFF_PROMISC, 1);
2959
2960        /* This firmware is known to not support multicast */
2961        if (!mgp->fw_multicast_support)
2962                return;
2963
2964        /* Disable multicast filtering */
2965
2966        err = myri10ge_send_cmd(mgp, MXGEFW_ENABLE_ALLMULTI, &cmd, 1);
2967        if (err != 0) {
2968                netdev_err(dev, "Failed MXGEFW_ENABLE_ALLMULTI, error status: %d\n",
2969                           err);
2970                goto abort;
2971        }
2972
2973        if ((dev->flags & IFF_ALLMULTI) || mgp->adopted_rx_filter_bug) {
2974                /* request to disable multicast filtering, so quit here */
2975                return;
2976        }
2977
2978        /* Flush the filters */
2979
2980        err = myri10ge_send_cmd(mgp, MXGEFW_LEAVE_ALL_MULTICAST_GROUPS,
2981                                &cmd, 1);
2982        if (err != 0) {
2983                netdev_err(dev, "Failed MXGEFW_LEAVE_ALL_MULTICAST_GROUPS, error status: %d\n",
2984                           err);
2985                goto abort;
2986        }
2987
2988        /* Walk the multicast list, and add each address */
2989        netdev_for_each_mc_addr(ha, dev) {
2990                memcpy(data, &ha->addr, ETH_ALEN);
2991                cmd.data0 = ntohl(data[0]);
2992                cmd.data1 = ntohl(data[1]);
2993                err = myri10ge_send_cmd(mgp, MXGEFW_JOIN_MULTICAST_GROUP,
2994                                        &cmd, 1);
2995
2996                if (err != 0) {
2997                        netdev_err(dev, "Failed MXGEFW_JOIN_MULTICAST_GROUP, error status:%d %pM\n",
2998                                   err, ha->addr);
2999                        goto abort;
3000                }
3001        }
3002        /* Enable multicast filtering */
3003        err = myri10ge_send_cmd(mgp, MXGEFW_DISABLE_ALLMULTI, &cmd, 1);
3004        if (err != 0) {
3005                netdev_err(dev, "Failed MXGEFW_DISABLE_ALLMULTI, error status: %d\n",
3006                           err);
3007                goto abort;
3008        }
3009
3010        return;
3011
3012abort:
3013        return;
3014}
3015
3016static int myri10ge_set_mac_address(struct net_device *dev, void *addr)
3017{
3018        struct sockaddr *sa = addr;
3019        struct myri10ge_priv *mgp = netdev_priv(dev);
3020        int status;
3021
3022        if (!is_valid_ether_addr(sa->sa_data))
3023                return -EADDRNOTAVAIL;
3024
3025        status = myri10ge_update_mac_address(mgp, sa->sa_data);
3026        if (status != 0) {
3027                netdev_err(dev, "changing mac address failed with %d\n",
3028                           status);
3029                return status;
3030        }
3031
3032        /* change the dev structure */
3033        memcpy(dev->dev_addr, sa->sa_data, ETH_ALEN);
3034        return 0;
3035}
3036
3037static int myri10ge_change_mtu(struct net_device *dev, int new_mtu)
3038{
3039        struct myri10ge_priv *mgp = netdev_priv(dev);
3040        int error = 0;
3041
3042        netdev_info(dev, "changing mtu from %d to %d\n", dev->mtu, new_mtu);
3043        if (mgp->running) {
3044                /* if we change the mtu on an active device, we must
3045                 * reset the device so the firmware sees the change */
3046                myri10ge_close(dev);
3047                dev->mtu = new_mtu;
3048                myri10ge_open(dev);
3049        } else
3050                dev->mtu = new_mtu;
3051
3052        return error;
3053}
3054
3055/*
3056 * Enable ECRC to align PCI-E Completion packets on an 8-byte boundary.
3057 * Only do it if the bridge is a root port since we don't want to disturb
3058 * any other device, except if forced with myri10ge_ecrc_enable > 1.
3059 */
3060
3061static void myri10ge_enable_ecrc(struct myri10ge_priv *mgp)
3062{
3063        struct pci_dev *bridge = mgp->pdev->bus->self;
3064        struct device *dev = &mgp->pdev->dev;
3065        int cap;
3066        unsigned err_cap;
3067        int ret;
3068
3069        if (!myri10ge_ecrc_enable || !bridge)
3070                return;
3071
3072        /* check that the bridge is a root port */
3073        if (pci_pcie_type(bridge) != PCI_EXP_TYPE_ROOT_PORT) {
3074                if (myri10ge_ecrc_enable > 1) {
3075                        struct pci_dev *prev_bridge, *old_bridge = bridge;
3076
3077                        /* Walk the hierarchy up to the root port
3078                         * where ECRC has to be enabled */
3079                        do {
3080                                prev_bridge = bridge;
3081                                bridge = bridge->bus->self;
3082                                if (!bridge || prev_bridge == bridge) {
3083                                        dev_err(dev,
3084                                                "Failed to find root port"
3085                                                " to force ECRC\n");
3086                                        return;
3087                                }
3088                        } while (pci_pcie_type(bridge) !=
3089                                 PCI_EXP_TYPE_ROOT_PORT);
3090
3091                        dev_info(dev,
3092                                 "Forcing ECRC on non-root port %s"
3093                                 " (enabling on root port %s)\n",
3094                                 pci_name(old_bridge), pci_name(bridge));
3095                } else {
3096                        dev_err(dev,
3097                                "Not enabling ECRC on non-root port %s\n",
3098                                pci_name(bridge));
3099                        return;
3100                }
3101        }
3102
3103        cap = pci_find_ext_capability(bridge, PCI_EXT_CAP_ID_ERR);
3104        if (!cap)
3105                return;
3106
3107        ret = pci_read_config_dword(bridge, cap + PCI_ERR_CAP, &err_cap);
3108        if (ret) {
3109                dev_err(dev, "failed reading ext-conf-space of %s\n",
3110                        pci_name(bridge));
3111                dev_err(dev, "\t pci=nommconf in use? "
3112                        "or buggy/incomplete/absent ACPI MCFG attr?\n");
3113                return;
3114        }
3115        if (!(err_cap & PCI_ERR_CAP_ECRC_GENC))
3116                return;
3117
3118        err_cap |= PCI_ERR_CAP_ECRC_GENE;
3119        pci_write_config_dword(bridge, cap + PCI_ERR_CAP, err_cap);
3120        dev_info(dev, "Enabled ECRC on upstream bridge %s\n", pci_name(bridge));
3121}
3122
3123/*
3124 * The Lanai Z8E PCI-E interface achieves higher Read-DMA throughput
3125 * when the PCI-E Completion packets are aligned on an 8-byte
3126 * boundary.  Some PCI-E chip sets always align Completion packets; on
3127 * the ones that do not, the alignment can be enforced by enabling
3128 * ECRC generation (if supported).
3129 *
3130 * When PCI-E Completion packets are not aligned, it is actually more
3131 * efficient to limit Read-DMA transactions to 2KB, rather than 4KB.
3132 *
3133 * If the driver can neither enable ECRC nor verify that it has
3134 * already been enabled, then it must use a firmware image which works
3135 * around unaligned completion packets (myri10ge_rss_ethp_z8e.dat), and it
3136 * should also ensure that it never gives the device a Read-DMA which is
3137 * larger than 2KB by setting the tx_boundary to 2KB.  If ECRC is
3138 * enabled, then the driver should use the aligned (myri10ge_rss_eth_z8e.dat)
3139 * firmware image, and set tx_boundary to 4KB.
3140 */
3141
3142static void myri10ge_firmware_probe(struct myri10ge_priv *mgp)
3143{
3144        struct pci_dev *pdev = mgp->pdev;
3145        struct device *dev = &pdev->dev;
3146        int status;
3147
3148        mgp->tx_boundary = 4096;
3149        /*
3150         * Verify the max read request size was set to 4KB
3151         * before trying the test with 4KB.
3152         */
3153        status = pcie_get_readrq(pdev);
3154        if (status < 0) {
3155                dev_err(dev, "Couldn't read max read req size: %d\n", status);
3156                goto abort;
3157        }
3158        if (status != 4096) {
3159                dev_warn(dev, "Max Read Request size != 4096 (%d)\n", status);
3160                mgp->tx_boundary = 2048;
3161        }
3162        /*
3163         * load the optimized firmware (which assumes aligned PCIe
3164         * completions) in order to see if it works on this host.
3165         */
3166        set_fw_name(mgp, myri10ge_fw_aligned, false);
3167        status = myri10ge_load_firmware(mgp, 1);
3168        if (status != 0) {
3169                goto abort;
3170        }
3171
3172        /*
3173         * Enable ECRC if possible
3174         */
3175        myri10ge_enable_ecrc(mgp);
3176
3177        /*
3178         * Run a DMA test which watches for unaligned completions and
3179         * aborts on the first one seen.
3180         */
3181
3182        status = myri10ge_dma_test(mgp, MXGEFW_CMD_UNALIGNED_TEST);
3183        if (status == 0)
3184                return;         /* keep the aligned firmware */
3185
3186        if (status != -E2BIG)
3187                dev_warn(dev, "DMA test failed: %d\n", status);
3188        if (status == -ENOSYS)
3189                dev_warn(dev, "Falling back to ethp! "
3190                         "Please install up to date fw\n");
3191abort:
3192        /* fall back to using the unaligned firmware */
3193        mgp->tx_boundary = 2048;
3194        set_fw_name(mgp, myri10ge_fw_unaligned, false);
3195}
3196
3197static void myri10ge_select_firmware(struct myri10ge_priv *mgp)
3198{
3199        int overridden = 0;
3200
3201        if (myri10ge_force_firmware == 0) {
3202                int link_width;
3203                u16 lnk;
3204
3205                pcie_capability_read_word(mgp->pdev, PCI_EXP_LNKSTA, &lnk);
3206                link_width = (lnk >> 4) & 0x3f;
3207
3208                /* Check to see if Link is less than 8 or if the
3209                 * upstream bridge is known to provide aligned
3210                 * completions */
3211                if (link_width < 8) {
3212                        dev_info(&mgp->pdev->dev, "PCIE x%d Link\n",
3213                                 link_width);
3214                        mgp->tx_boundary = 4096;
3215                        set_fw_name(mgp, myri10ge_fw_aligned, false);
3216                } else {
3217                        myri10ge_firmware_probe(mgp);
3218                }
3219        } else {
3220                if (myri10ge_force_firmware == 1) {
3221                        dev_info(&mgp->pdev->dev,
3222                                 "Assuming aligned completions (forced)\n");
3223                        mgp->tx_boundary = 4096;
3224                        set_fw_name(mgp, myri10ge_fw_aligned, false);
3225                } else {
3226                        dev_info(&mgp->pdev->dev,
3227                                 "Assuming unaligned completions (forced)\n");
3228                        mgp->tx_boundary = 2048;
3229                        set_fw_name(mgp, myri10ge_fw_unaligned, false);
3230                }
3231        }
3232
3233        kernel_param_lock(THIS_MODULE);
3234        if (myri10ge_fw_name != NULL) {
3235                char *fw_name = kstrdup(myri10ge_fw_name, GFP_KERNEL);
3236                if (fw_name) {
3237                        overridden = 1;
3238                        set_fw_name(mgp, fw_name, true);
3239                }
3240        }
3241        kernel_param_unlock(THIS_MODULE);
3242
3243        if (mgp->board_number < MYRI10GE_MAX_BOARDS &&
3244            myri10ge_fw_names[mgp->board_number] != NULL &&
3245            strlen(myri10ge_fw_names[mgp->board_number])) {
3246                set_fw_name(mgp, myri10ge_fw_names[mgp->board_number], false);
3247                overridden = 1;
3248        }
3249        if (overridden)
3250                dev_info(&mgp->pdev->dev, "overriding firmware to %s\n",
3251                         mgp->fw_name);
3252}
3253
3254static void myri10ge_mask_surprise_down(struct pci_dev *pdev)
3255{
3256        struct pci_dev *bridge = pdev->bus->self;
3257        int cap;
3258        u32 mask;
3259
3260        if (bridge == NULL)
3261                return;
3262
3263        cap = pci_find_ext_capability(bridge, PCI_EXT_CAP_ID_ERR);
3264        if (cap) {
3265                /* a sram parity error can cause a surprise link
3266                 * down; since we expect and can recover from sram
3267                 * parity errors, mask surprise link down events */
3268                pci_read_config_dword(bridge, cap + PCI_ERR_UNCOR_MASK, &mask);
3269                mask |= 0x20;
3270                pci_write_config_dword(bridge, cap + PCI_ERR_UNCOR_MASK, mask);
3271        }
3272}
3273
3274#ifdef CONFIG_PM
3275static int myri10ge_suspend(struct pci_dev *pdev, pm_message_t state)
3276{
3277        struct myri10ge_priv *mgp;
3278        struct net_device *netdev;
3279
3280        mgp = pci_get_drvdata(pdev);
3281        if (mgp == NULL)
3282                return -EINVAL;
3283        netdev = mgp->dev;
3284
3285        netif_device_detach(netdev);
3286        if (netif_running(netdev)) {
3287                netdev_info(netdev, "closing\n");
3288                rtnl_lock();
3289                myri10ge_close(netdev);
3290                rtnl_unlock();
3291        }
3292        myri10ge_dummy_rdma(mgp, 0);
3293        pci_save_state(pdev);
3294        pci_disable_device(pdev);
3295
3296        return pci_set_power_state(pdev, pci_choose_state(pdev, state));
3297}
3298
3299static int myri10ge_resume(struct pci_dev *pdev)
3300{
3301        struct myri10ge_priv *mgp;
3302        struct net_device *netdev;
3303        int status;
3304        u16 vendor;
3305
3306        mgp = pci_get_drvdata(pdev);
3307        if (mgp == NULL)
3308                return -EINVAL;
3309        netdev = mgp->dev;
3310        pci_set_power_state(pdev, PCI_D0);      /* zeros conf space as a side effect */
3311        msleep(5);              /* give card time to respond */
3312        pci_read_config_word(mgp->pdev, PCI_VENDOR_ID, &vendor);
3313        if (vendor == 0xffff) {
3314                netdev_err(mgp->dev, "device disappeared!\n");
3315                return -EIO;
3316        }
3317
3318        pci_restore_state(pdev);
3319
3320        status = pci_enable_device(pdev);
3321        if (status) {
3322                dev_err(&pdev->dev, "failed to enable device\n");
3323                return status;
3324        }
3325
3326        pci_set_master(pdev);
3327
3328        myri10ge_reset(mgp);
3329        myri10ge_dummy_rdma(mgp, 1);
3330
3331        /* Save configuration space to be restored if the
3332         * nic resets due to a parity error */
3333        pci_save_state(pdev);
3334
3335        if (netif_running(netdev)) {
3336                rtnl_lock();
3337                status = myri10ge_open(netdev);
3338                rtnl_unlock();
3339                if (status != 0)
3340                        goto abort_with_enabled;
3341
3342        }
3343        netif_device_attach(netdev);
3344
3345        return 0;
3346
3347abort_with_enabled:
3348        pci_disable_device(pdev);
3349        return -EIO;
3350
3351}
3352#endif                          /* CONFIG_PM */
3353
3354static u32 myri10ge_read_reboot(struct myri10ge_priv *mgp)
3355{
3356        struct pci_dev *pdev = mgp->pdev;
3357        int vs = mgp->vendor_specific_offset;
3358        u32 reboot;
3359
3360        /*enter read32 mode */
3361        pci_write_config_byte(pdev, vs + 0x10, 0x3);
3362
3363        /*read REBOOT_STATUS (0xfffffff0) */
3364        pci_write_config_dword(pdev, vs + 0x18, 0xfffffff0);
3365        pci_read_config_dword(pdev, vs + 0x14, &reboot);
3366        return reboot;
3367}
3368
3369static void
3370myri10ge_check_slice(struct myri10ge_slice_state *ss, int *reset_needed,
3371                     int *busy_slice_cnt, u32 rx_pause_cnt)
3372{
3373        struct myri10ge_priv *mgp = ss->mgp;
3374        int slice = ss - mgp->ss;
3375
3376        if (ss->tx.req != ss->tx.done &&
3377            ss->tx.done == ss->watchdog_tx_done &&
3378            ss->watchdog_tx_req != ss->watchdog_tx_done) {
3379                /* nic seems like it might be stuck.. */
3380                if (rx_pause_cnt != mgp->watchdog_pause) {
3381                        if (net_ratelimit())
3382                                netdev_warn(mgp->dev, "slice %d: TX paused, "
3383                                            "check link partner\n", slice);
3384                } else {
3385                        netdev_warn(mgp->dev,
3386                                    "slice %d: TX stuck %d %d %d %d %d %d\n",
3387                                    slice, ss->tx.queue_active, ss->tx.req,
3388                                    ss->tx.done, ss->tx.pkt_start,
3389                                    ss->tx.pkt_done,
3390                                    (int)ntohl(mgp->ss[slice].fw_stats->
3391                                               send_done_count));
3392                        *reset_needed = 1;
3393                        ss->stuck = 1;
3394                }
3395        }
3396        if (ss->watchdog_tx_done != ss->tx.done ||
3397            ss->watchdog_rx_done != ss->rx_done.cnt) {
3398                *busy_slice_cnt += 1;
3399        }
3400        ss->watchdog_tx_done = ss->tx.done;
3401        ss->watchdog_tx_req = ss->tx.req;
3402        ss->watchdog_rx_done = ss->rx_done.cnt;
3403}
3404
3405/*
3406 * This watchdog is used to check whether the board has suffered
3407 * from a parity error and needs to be recovered.
3408 */
3409static void myri10ge_watchdog(struct work_struct *work)
3410{
3411        struct myri10ge_priv *mgp =
3412            container_of(work, struct myri10ge_priv, watchdog_work);
3413        struct myri10ge_slice_state *ss;
3414        u32 reboot, rx_pause_cnt;
3415        int status, rebooted;
3416        int i;
3417        int reset_needed = 0;
3418        int busy_slice_cnt = 0;
3419        u16 cmd, vendor;
3420
3421        mgp->watchdog_resets++;
3422        pci_read_config_word(mgp->pdev, PCI_COMMAND, &cmd);
3423        rebooted = 0;
3424        if ((cmd & PCI_COMMAND_MASTER) == 0) {
3425                /* Bus master DMA disabled?  Check to see
3426                 * if the card rebooted due to a parity error
3427                 * For now, just report it */
3428                reboot = myri10ge_read_reboot(mgp);
3429                netdev_err(mgp->dev, "NIC rebooted (0x%x),%s resetting\n",
3430                           reboot, myri10ge_reset_recover ? "" : " not");
3431                if (myri10ge_reset_recover == 0)
3432                        return;
3433                rtnl_lock();
3434                mgp->rebooted = 1;
3435                rebooted = 1;
3436                myri10ge_close(mgp->dev);
3437                myri10ge_reset_recover--;
3438                mgp->rebooted = 0;
3439                /*
3440                 * A rebooted nic will come back with config space as
3441                 * it was after power was applied to PCIe bus.
3442                 * Attempt to restore config space which was saved
3443                 * when the driver was loaded, or the last time the
3444                 * nic was resumed from power saving mode.
3445                 */
3446                pci_restore_state(mgp->pdev);
3447
3448                /* save state again for accounting reasons */
3449                pci_save_state(mgp->pdev);
3450
3451        } else {
3452                /* if we get back -1's from our slot, perhaps somebody
3453                 * powered off our card.  Don't try to reset it in
3454                 * this case */
3455                if (cmd == 0xffff) {
3456                        pci_read_config_word(mgp->pdev, PCI_VENDOR_ID, &vendor);
3457                        if (vendor == 0xffff) {
3458                                netdev_err(mgp->dev, "device disappeared!\n");
3459                                return;
3460                        }
3461                }
3462                /* Perhaps it is a software error. See if stuck slice
3463                 * has recovered, reset if not */
3464                rx_pause_cnt = ntohl(mgp->ss[0].fw_stats->dropped_pause);
3465                for (i = 0; i < mgp->num_slices; i++) {
3466                        ss = mgp->ss;
3467                        if (ss->stuck) {
3468                                myri10ge_check_slice(ss, &reset_needed,
3469                                                     &busy_slice_cnt,
3470                                                     rx_pause_cnt);
3471                                ss->stuck = 0;
3472                        }
3473                }
3474                if (!reset_needed) {
3475                        netdev_dbg(mgp->dev, "not resetting\n");
3476                        return;
3477                }
3478
3479                netdev_err(mgp->dev, "device timeout, resetting\n");
3480        }
3481
3482        if (!rebooted) {
3483                rtnl_lock();
3484                myri10ge_close(mgp->dev);
3485        }
3486        status = myri10ge_load_firmware(mgp, 1);
3487        if (status != 0)
3488                netdev_err(mgp->dev, "failed to load firmware\n");
3489        else
3490                myri10ge_open(mgp->dev);
3491        rtnl_unlock();
3492}
3493
3494/*
3495 * We use our own timer routine rather than relying upon
3496 * netdev->tx_timeout because we have a very large hardware transmit
3497 * queue.  Due to the large queue, the netdev->tx_timeout function
3498 * cannot detect a NIC with a parity error in a timely fashion if the
3499 * NIC is lightly loaded.
3500 */
3501static void myri10ge_watchdog_timer(struct timer_list *t)
3502{
3503        struct myri10ge_priv *mgp;
3504        struct myri10ge_slice_state *ss;
3505        int i, reset_needed, busy_slice_cnt;
3506        u32 rx_pause_cnt;
3507        u16 cmd;
3508
3509        mgp = from_timer(mgp, t, watchdog_timer);
3510
3511        rx_pause_cnt = ntohl(mgp->ss[0].fw_stats->dropped_pause);
3512        busy_slice_cnt = 0;
3513        for (i = 0, reset_needed = 0;
3514             i < mgp->num_slices && reset_needed == 0; ++i) {
3515
3516                ss = &mgp->ss[i];
3517                if (ss->rx_small.watchdog_needed) {
3518                        myri10ge_alloc_rx_pages(mgp, &ss->rx_small,
3519                                                mgp->small_bytes + MXGEFW_PAD,
3520                                                1);
3521                        if (ss->rx_small.fill_cnt - ss->rx_small.cnt >=
3522                            myri10ge_fill_thresh)
3523                                ss->rx_small.watchdog_needed = 0;
3524                }
3525                if (ss->rx_big.watchdog_needed) {
3526                        myri10ge_alloc_rx_pages(mgp, &ss->rx_big,
3527                                                mgp->big_bytes, 1);
3528                        if (ss->rx_big.fill_cnt - ss->rx_big.cnt >=
3529                            myri10ge_fill_thresh)
3530                                ss->rx_big.watchdog_needed = 0;
3531                }
3532                myri10ge_check_slice(ss, &reset_needed, &busy_slice_cnt,
3533                                     rx_pause_cnt);
3534        }
3535        /* if we've sent or received no traffic, poll the NIC to
3536         * ensure it is still there.  Otherwise, we risk not noticing
3537         * an error in a timely fashion */
3538        if (busy_slice_cnt == 0) {
3539                pci_read_config_word(mgp->pdev, PCI_COMMAND, &cmd);
3540                if ((cmd & PCI_COMMAND_MASTER) == 0) {
3541                        reset_needed = 1;
3542                }
3543        }
3544        mgp->watchdog_pause = rx_pause_cnt;
3545
3546        if (reset_needed) {
3547                schedule_work(&mgp->watchdog_work);
3548        } else {
3549                /* rearm timer */
3550                mod_timer(&mgp->watchdog_timer,
3551                          jiffies + myri10ge_watchdog_timeout * HZ);
3552        }
3553}
3554
3555static void myri10ge_free_slices(struct myri10ge_priv *mgp)
3556{
3557        struct myri10ge_slice_state *ss;
3558        struct pci_dev *pdev = mgp->pdev;
3559        size_t bytes;
3560        int i;
3561
3562        if (mgp->ss == NULL)
3563                return;
3564
3565        for (i = 0; i < mgp->num_slices; i++) {
3566                ss = &mgp->ss[i];
3567                if (ss->rx_done.entry != NULL) {
3568                        bytes = mgp->max_intr_slots *
3569                            sizeof(*ss->rx_done.entry);
3570                        dma_free_coherent(&pdev->dev, bytes,
3571                                          ss->rx_done.entry, ss->rx_done.bus);
3572                        ss->rx_done.entry = NULL;
3573                }
3574                if (ss->fw_stats != NULL) {
3575                        bytes = sizeof(*ss->fw_stats);
3576                        dma_free_coherent(&pdev->dev, bytes,
3577                                          ss->fw_stats, ss->fw_stats_bus);
3578                        ss->fw_stats = NULL;
3579                }
3580                napi_hash_del(&ss->napi);
3581                netif_napi_del(&ss->napi);
3582        }
3583        /* Wait till napi structs are no longer used, and then free ss. */
3584        synchronize_rcu();
3585        kfree(mgp->ss);
3586        mgp->ss = NULL;
3587}
3588
3589static int myri10ge_alloc_slices(struct myri10ge_priv *mgp)
3590{
3591        struct myri10ge_slice_state *ss;
3592        struct pci_dev *pdev = mgp->pdev;
3593        size_t bytes;
3594        int i;
3595
3596        bytes = sizeof(*mgp->ss) * mgp->num_slices;
3597        mgp->ss = kzalloc(bytes, GFP_KERNEL);
3598        if (mgp->ss == NULL) {
3599                return -ENOMEM;
3600        }
3601
3602        for (i = 0; i < mgp->num_slices; i++) {
3603                ss = &mgp->ss[i];
3604                bytes = mgp->max_intr_slots * sizeof(*ss->rx_done.entry);
3605                ss->rx_done.entry = dma_alloc_coherent(&pdev->dev, bytes,
3606                                                       &ss->rx_done.bus,
3607                                                       GFP_KERNEL);
3608                if (ss->rx_done.entry == NULL)
3609                        goto abort;
3610                bytes = sizeof(*ss->fw_stats);
3611                ss->fw_stats = dma_alloc_coherent(&pdev->dev, bytes,
3612                                                  &ss->fw_stats_bus,
3613                                                  GFP_KERNEL);
3614                if (ss->fw_stats == NULL)
3615                        goto abort;
3616                ss->mgp = mgp;
3617                ss->dev = mgp->dev;
3618                netif_napi_add(ss->dev, &ss->napi, myri10ge_poll,
3619                               myri10ge_napi_weight);
3620        }
3621        return 0;
3622abort:
3623        myri10ge_free_slices(mgp);
3624        return -ENOMEM;
3625}
3626
3627/*
3628 * This function determines the number of slices supported.
3629 * The number slices is the minimum of the number of CPUS,
3630 * the number of MSI-X irqs supported, the number of slices
3631 * supported by the firmware
3632 */
3633static void myri10ge_probe_slices(struct myri10ge_priv *mgp)
3634{
3635        struct myri10ge_cmd cmd;
3636        struct pci_dev *pdev = mgp->pdev;
3637        char *old_fw;
3638        bool old_allocated;
3639        int i, status, ncpus;
3640
3641        mgp->num_slices = 1;
3642        ncpus = netif_get_num_default_rss_queues();
3643
3644        if (myri10ge_max_slices == 1 || !pdev->msix_cap ||
3645            (myri10ge_max_slices == -1 && ncpus < 2))
3646                return;
3647
3648        /* try to load the slice aware rss firmware */
3649        old_fw = mgp->fw_name;
3650        old_allocated = mgp->fw_name_allocated;
3651        /* don't free old_fw if we override it. */
3652        mgp->fw_name_allocated = false;
3653
3654        if (myri10ge_fw_name != NULL) {
3655                dev_info(&mgp->pdev->dev, "overriding rss firmware to %s\n",
3656                         myri10ge_fw_name);
3657                set_fw_name(mgp, myri10ge_fw_name, false);
3658        } else if (old_fw == myri10ge_fw_aligned)
3659                set_fw_name(mgp, myri10ge_fw_rss_aligned, false);
3660        else
3661                set_fw_name(mgp, myri10ge_fw_rss_unaligned, false);
3662        status = myri10ge_load_firmware(mgp, 0);
3663        if (status != 0) {
3664                dev_info(&pdev->dev, "Rss firmware not found\n");
3665                if (old_allocated)
3666                        kfree(old_fw);
3667                return;
3668        }
3669
3670        /* hit the board with a reset to ensure it is alive */
3671        memset(&cmd, 0, sizeof(cmd));
3672        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_RESET, &cmd, 0);
3673        if (status != 0) {
3674                dev_err(&mgp->pdev->dev, "failed reset\n");
3675                goto abort_with_fw;
3676        }
3677
3678        mgp->max_intr_slots = cmd.data0 / sizeof(struct mcp_slot);
3679
3680        /* tell it the size of the interrupt queues */
3681        cmd.data0 = mgp->max_intr_slots * sizeof(struct mcp_slot);
3682        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_SIZE, &cmd, 0);
3683        if (status != 0) {
3684                dev_err(&mgp->pdev->dev, "failed MXGEFW_CMD_SET_INTRQ_SIZE\n");
3685                goto abort_with_fw;
3686        }
3687
3688        /* ask the maximum number of slices it supports */
3689        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_RSS_QUEUES, &cmd, 0);
3690        if (status != 0)
3691                goto abort_with_fw;
3692        else
3693                mgp->num_slices = cmd.data0;
3694
3695        /* Only allow multiple slices if MSI-X is usable */
3696        if (!myri10ge_msi) {
3697                goto abort_with_fw;
3698        }
3699
3700        /* if the admin did not specify a limit to how many
3701         * slices we should use, cap it automatically to the
3702         * number of CPUs currently online */
3703        if (myri10ge_max_slices == -1)
3704                myri10ge_max_slices = ncpus;
3705
3706        if (mgp->num_slices > myri10ge_max_slices)
3707                mgp->num_slices = myri10ge_max_slices;
3708
3709        /* Now try to allocate as many MSI-X vectors as we have
3710         * slices. We give up on MSI-X if we can only get a single
3711         * vector. */
3712
3713        mgp->msix_vectors = kcalloc(mgp->num_slices, sizeof(*mgp->msix_vectors),
3714                                    GFP_KERNEL);
3715        if (mgp->msix_vectors == NULL)
3716                goto no_msix;
3717        for (i = 0; i < mgp->num_slices; i++) {
3718                mgp->msix_vectors[i].entry = i;
3719        }
3720
3721        while (mgp->num_slices > 1) {
3722                mgp->num_slices = rounddown_pow_of_two(mgp->num_slices);
3723                if (mgp->num_slices == 1)
3724                        goto no_msix;
3725                status = pci_enable_msix_range(pdev,
3726                                               mgp->msix_vectors,
3727                                               mgp->num_slices,
3728                                               mgp->num_slices);
3729                if (status < 0)
3730                        goto no_msix;
3731
3732                pci_disable_msix(pdev);
3733
3734                if (status == mgp->num_slices) {
3735                        if (old_allocated)
3736                                kfree(old_fw);
3737                        return;
3738                } else {
3739                        mgp->num_slices = status;
3740                }
3741        }
3742
3743no_msix:
3744        if (mgp->msix_vectors != NULL) {
3745                kfree(mgp->msix_vectors);
3746                mgp->msix_vectors = NULL;
3747        }
3748
3749abort_with_fw:
3750        mgp->num_slices = 1;
3751        set_fw_name(mgp, old_fw, old_allocated);
3752        myri10ge_load_firmware(mgp, 0);
3753}
3754
3755static const struct net_device_ops myri10ge_netdev_ops = {
3756        .ndo_open               = myri10ge_open,
3757        .ndo_stop               = myri10ge_close,
3758        .ndo_start_xmit         = myri10ge_xmit,
3759        .ndo_get_stats64        = myri10ge_get_stats,
3760        .ndo_validate_addr      = eth_validate_addr,
3761        .ndo_change_mtu         = myri10ge_change_mtu,
3762        .ndo_set_rx_mode        = myri10ge_set_multicast_list,
3763        .ndo_set_mac_address    = myri10ge_set_mac_address,
3764};
3765
3766static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
3767{
3768        struct net_device *netdev;
3769        struct myri10ge_priv *mgp;
3770        struct device *dev = &pdev->dev;
3771        int i;
3772        int status = -ENXIO;
3773        int dac_enabled;
3774        unsigned hdr_offset, ss_offset;
3775        static int board_number;
3776
3777        netdev = alloc_etherdev_mq(sizeof(*mgp), MYRI10GE_MAX_SLICES);
3778        if (netdev == NULL)
3779                return -ENOMEM;
3780
3781        SET_NETDEV_DEV(netdev, &pdev->dev);
3782
3783        mgp = netdev_priv(netdev);
3784        mgp->dev = netdev;
3785        mgp->pdev = pdev;
3786        mgp->pause = myri10ge_flow_control;
3787        mgp->intr_coal_delay = myri10ge_intr_coal_delay;
3788        mgp->msg_enable = netif_msg_init(myri10ge_debug, MYRI10GE_MSG_DEFAULT);
3789        mgp->board_number = board_number;
3790        init_waitqueue_head(&mgp->down_wq);
3791
3792        if (pci_enable_device(pdev)) {
3793                dev_err(&pdev->dev, "pci_enable_device call failed\n");
3794                status = -ENODEV;
3795                goto abort_with_netdev;
3796        }
3797
3798        /* Find the vendor-specific cap so we can check
3799         * the reboot register later on */
3800        mgp->vendor_specific_offset
3801            = pci_find_capability(pdev, PCI_CAP_ID_VNDR);
3802
3803        /* Set our max read request to 4KB */
3804        status = pcie_set_readrq(pdev, 4096);
3805        if (status != 0) {
3806                dev_err(&pdev->dev, "Error %d writing PCI_EXP_DEVCTL\n",
3807                        status);
3808                goto abort_with_enabled;
3809        }
3810
3811        myri10ge_mask_surprise_down(pdev);
3812        pci_set_master(pdev);
3813        dac_enabled = 1;
3814        status = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
3815        if (status != 0) {
3816                dac_enabled = 0;
3817                dev_err(&pdev->dev,
3818                        "64-bit pci address mask was refused, "
3819                        "trying 32-bit\n");
3820                status = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
3821        }
3822        if (status != 0) {
3823                dev_err(&pdev->dev, "Error %d setting DMA mask\n", status);
3824                goto abort_with_enabled;
3825        }
3826        (void)pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
3827        mgp->cmd = dma_alloc_coherent(&pdev->dev, sizeof(*mgp->cmd),
3828                                      &mgp->cmd_bus, GFP_KERNEL);
3829        if (!mgp->cmd) {
3830                status = -ENOMEM;
3831                goto abort_with_enabled;
3832        }
3833
3834        mgp->board_span = pci_resource_len(pdev, 0);
3835        mgp->iomem_base = pci_resource_start(pdev, 0);
3836        mgp->wc_cookie = arch_phys_wc_add(mgp->iomem_base, mgp->board_span);
3837        mgp->sram = ioremap_wc(mgp->iomem_base, mgp->board_span);
3838        if (mgp->sram == NULL) {
3839                dev_err(&pdev->dev, "ioremap failed for %ld bytes at 0x%lx\n",
3840                        mgp->board_span, mgp->iomem_base);
3841                status = -ENXIO;
3842                goto abort_with_mtrr;
3843        }
3844        hdr_offset =
3845            swab32(readl(mgp->sram + MCP_HEADER_PTR_OFFSET)) & 0xffffc;
3846        ss_offset = hdr_offset + offsetof(struct mcp_gen_header, string_specs);
3847        mgp->sram_size = swab32(readl(mgp->sram + ss_offset));
3848        if (mgp->sram_size > mgp->board_span ||
3849            mgp->sram_size <= MYRI10GE_FW_OFFSET) {
3850                dev_err(&pdev->dev,
3851                        "invalid sram_size %dB or board span %ldB\n",
3852                        mgp->sram_size, mgp->board_span);
3853                goto abort_with_ioremap;
3854        }
3855        memcpy_fromio(mgp->eeprom_strings,
3856                      mgp->sram + mgp->sram_size, MYRI10GE_EEPROM_STRINGS_SIZE);
3857        memset(mgp->eeprom_strings + MYRI10GE_EEPROM_STRINGS_SIZE - 2, 0, 2);
3858        status = myri10ge_read_mac_addr(mgp);
3859        if (status)
3860                goto abort_with_ioremap;
3861
3862        for (i = 0; i < ETH_ALEN; i++)
3863                netdev->dev_addr[i] = mgp->mac_addr[i];
3864
3865        myri10ge_select_firmware(mgp);
3866
3867        status = myri10ge_load_firmware(mgp, 1);
3868        if (status != 0) {
3869                dev_err(&pdev->dev, "failed to load firmware\n");
3870                goto abort_with_ioremap;
3871        }
3872        myri10ge_probe_slices(mgp);
3873        status = myri10ge_alloc_slices(mgp);
3874        if (status != 0) {
3875                dev_err(&pdev->dev, "failed to alloc slice state\n");
3876                goto abort_with_firmware;
3877        }
3878        netif_set_real_num_tx_queues(netdev, mgp->num_slices);
3879        netif_set_real_num_rx_queues(netdev, mgp->num_slices);
3880        status = myri10ge_reset(mgp);
3881        if (status != 0) {
3882                dev_err(&pdev->dev, "failed reset\n");
3883                goto abort_with_slices;
3884        }
3885#ifdef CONFIG_MYRI10GE_DCA
3886        myri10ge_setup_dca(mgp);
3887#endif
3888        pci_set_drvdata(pdev, mgp);
3889
3890        /* MTU range: 68 - 9000 */
3891        netdev->min_mtu = ETH_MIN_MTU;
3892        netdev->max_mtu = MYRI10GE_MAX_ETHER_MTU - ETH_HLEN;
3893
3894        if (myri10ge_initial_mtu > netdev->max_mtu)
3895                myri10ge_initial_mtu = netdev->max_mtu;
3896        if (myri10ge_initial_mtu < netdev->min_mtu)
3897                myri10ge_initial_mtu = netdev->min_mtu;
3898
3899        netdev->mtu = myri10ge_initial_mtu;
3900
3901        netdev->netdev_ops = &myri10ge_netdev_ops;
3902        netdev->hw_features = mgp->features | NETIF_F_RXCSUM;
3903
3904        /* fake NETIF_F_HW_VLAN_CTAG_RX for good GRO performance */
3905        netdev->hw_features |= NETIF_F_HW_VLAN_CTAG_RX;
3906
3907        netdev->features = netdev->hw_features;
3908
3909        if (dac_enabled)
3910                netdev->features |= NETIF_F_HIGHDMA;
3911
3912        netdev->vlan_features |= mgp->features;
3913        if (mgp->fw_ver_tiny < 37)
3914                netdev->vlan_features &= ~NETIF_F_TSO6;
3915        if (mgp->fw_ver_tiny < 32)
3916                netdev->vlan_features &= ~NETIF_F_TSO;
3917
3918        /* make sure we can get an irq, and that MSI can be
3919         * setup (if available). */
3920        status = myri10ge_request_irq(mgp);
3921        if (status != 0)
3922                goto abort_with_slices;
3923        myri10ge_free_irq(mgp);
3924
3925        /* Save configuration space to be restored if the
3926         * nic resets due to a parity error */
3927        pci_save_state(pdev);
3928
3929        /* Setup the watchdog timer */
3930        timer_setup(&mgp->watchdog_timer, myri10ge_watchdog_timer, 0);
3931
3932        netdev->ethtool_ops = &myri10ge_ethtool_ops;
3933        INIT_WORK(&mgp->watchdog_work, myri10ge_watchdog);
3934        status = register_netdev(netdev);
3935        if (status != 0) {
3936                dev_err(&pdev->dev, "register_netdev failed: %d\n", status);
3937                goto abort_with_state;
3938        }
3939        if (mgp->msix_enabled)
3940                dev_info(dev, "%d MSI-X IRQs, tx bndry %d, fw %s, MTRR %s, WC Enabled\n",
3941                         mgp->num_slices, mgp->tx_boundary, mgp->fw_name,
3942                         (mgp->wc_cookie > 0 ? "Enabled" : "Disabled"));
3943        else
3944                dev_info(dev, "%s IRQ %d, tx bndry %d, fw %s, MTRR %s, WC Enabled\n",
3945                         mgp->msi_enabled ? "MSI" : "xPIC",
3946                         pdev->irq, mgp->tx_boundary, mgp->fw_name,
3947                         (mgp->wc_cookie > 0 ? "Enabled" : "Disabled"));
3948
3949        board_number++;
3950        return 0;
3951
3952abort_with_state:
3953        pci_restore_state(pdev);
3954
3955abort_with_slices:
3956        myri10ge_free_slices(mgp);
3957
3958abort_with_firmware:
3959        myri10ge_dummy_rdma(mgp, 0);
3960
3961abort_with_ioremap:
3962        if (mgp->mac_addr_string != NULL)
3963                dev_err(&pdev->dev,
3964                        "myri10ge_probe() failed: MAC=%s, SN=%ld\n",
3965                        mgp->mac_addr_string, mgp->serial_number);
3966        iounmap(mgp->sram);
3967
3968abort_with_mtrr:
3969        arch_phys_wc_del(mgp->wc_cookie);
3970        dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
3971                          mgp->cmd, mgp->cmd_bus);
3972
3973abort_with_enabled:
3974        pci_disable_device(pdev);
3975
3976abort_with_netdev:
3977        set_fw_name(mgp, NULL, false);
3978        free_netdev(netdev);
3979        return status;
3980}
3981
3982/*
3983 * myri10ge_remove
3984 *
3985 * Does what is necessary to shutdown one Myrinet device. Called
3986 *   once for each Myrinet card by the kernel when a module is
3987 *   unloaded.
3988 */
3989static void myri10ge_remove(struct pci_dev *pdev)
3990{
3991        struct myri10ge_priv *mgp;
3992        struct net_device *netdev;
3993
3994        mgp = pci_get_drvdata(pdev);
3995        if (mgp == NULL)
3996                return;
3997
3998        cancel_work_sync(&mgp->watchdog_work);
3999        netdev = mgp->dev;
4000        unregister_netdev(netdev);
4001
4002#ifdef CONFIG_MYRI10GE_DCA
4003        myri10ge_teardown_dca(mgp);
4004#endif
4005        myri10ge_dummy_rdma(mgp, 0);
4006
4007        /* avoid a memory leak */
4008        pci_restore_state(pdev);
4009
4010        iounmap(mgp->sram);
4011        arch_phys_wc_del(mgp->wc_cookie);
4012        myri10ge_free_slices(mgp);
4013        kfree(mgp->msix_vectors);
4014        dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
4015                          mgp->cmd, mgp->cmd_bus);
4016
4017        set_fw_name(mgp, NULL, false);
4018        free_netdev(netdev);
4019        pci_disable_device(pdev);
4020}
4021
4022#define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E      0x0008
4023#define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9    0x0009
4024
4025static const struct pci_device_id myri10ge_pci_tbl[] = {
4026        {PCI_DEVICE(PCI_VENDOR_ID_MYRICOM, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E)},
4027        {PCI_DEVICE
4028         (PCI_VENDOR_ID_MYRICOM, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9)},
4029        {0},
4030};
4031
4032MODULE_DEVICE_TABLE(pci, myri10ge_pci_tbl);
4033
4034static struct pci_driver myri10ge_driver = {
4035        .name = "myri10ge",
4036        .probe = myri10ge_probe,
4037        .remove = myri10ge_remove,
4038        .id_table = myri10ge_pci_tbl,
4039#ifdef CONFIG_PM
4040        .suspend = myri10ge_suspend,
4041        .resume = myri10ge_resume,
4042#endif
4043};
4044
4045#ifdef CONFIG_MYRI10GE_DCA
4046static int
4047myri10ge_notify_dca(struct notifier_block *nb, unsigned long event, void *p)
4048{
4049        int err = driver_for_each_device(&myri10ge_driver.driver,
4050                                         NULL, &event,
4051                                         myri10ge_notify_dca_device);
4052
4053        if (err)
4054                return NOTIFY_BAD;
4055        return NOTIFY_DONE;
4056}
4057
4058static struct notifier_block myri10ge_dca_notifier = {
4059        .notifier_call = myri10ge_notify_dca,
4060        .next = NULL,
4061        .priority = 0,
4062};
4063#endif                          /* CONFIG_MYRI10GE_DCA */
4064
4065static __init int myri10ge_init_module(void)
4066{
4067        pr_info("Version %s\n", MYRI10GE_VERSION_STR);
4068
4069        if (myri10ge_rss_hash > MXGEFW_RSS_HASH_TYPE_MAX) {
4070                pr_err("Illegal rssh hash type %d, defaulting to source port\n",
4071                       myri10ge_rss_hash);
4072                myri10ge_rss_hash = MXGEFW_RSS_HASH_TYPE_SRC_PORT;
4073        }
4074#ifdef CONFIG_MYRI10GE_DCA
4075        dca_register_notify(&myri10ge_dca_notifier);
4076#endif
4077        if (myri10ge_max_slices > MYRI10GE_MAX_SLICES)
4078                myri10ge_max_slices = MYRI10GE_MAX_SLICES;
4079
4080        return pci_register_driver(&myri10ge_driver);
4081}
4082
4083module_init(myri10ge_init_module);
4084
4085static __exit void myri10ge_cleanup_module(void)
4086{
4087#ifdef CONFIG_MYRI10GE_DCA
4088        dca_unregister_notify(&myri10ge_dca_notifier);
4089#endif
4090        pci_unregister_driver(&myri10ge_driver);
4091}
4092
4093module_exit(myri10ge_cleanup_module);
4094