1/****************************************************************************** 2 * 3 * This file is provided under a dual BSD/GPLv2 license. When using or 4 * redistributing this file, you may do so under either license. 5 * 6 * GPL LICENSE SUMMARY 7 * 8 * Copyright(c) 2015 - 2017 Intel Deutschland GmbH 9 * Copyright (C) 2018 Intel Corporation 10 * Copyright (C) 2019 Intel Corporation 11 * 12 * This program is free software; you can redistribute it and/or modify 13 * it under the terms of version 2 of the GNU General Public License as 14 * published by the Free Software Foundation. 15 * 16 * This program is distributed in the hope that it will be useful, but 17 * WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 19 * General Public License for more details. 20 * 21 * The full GNU General Public License is included in this distribution 22 * in the file called COPYING. 23 * 24 * Contact Information: 25 * Intel Linux Wireless <linuxwifi@intel.com> 26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 27 * 28 * BSD LICENSE 29 * 30 * Copyright(c) 2015 - 2017 Intel Deutschland GmbH 31 * Copyright (C) 2018 Intel Corporation 32 * Copyright (C) 2019 Intel Corporation 33 * All rights reserved. 34 * 35 * Redistribution and use in source and binary forms, with or without 36 * modification, are permitted provided that the following conditions 37 * are met: 38 * 39 * * Redistributions of source code must retain the above copyright 40 * notice, this list of conditions and the following disclaimer. 41 * * Redistributions in binary form must reproduce the above copyright 42 * notice, this list of conditions and the following disclaimer in 43 * the documentation and/or other materials provided with the 44 * distribution. 45 * * Neither the name Intel Corporation nor the names of its 46 * contributors may be used to endorse or promote products derived 47 * from this software without specific prior written permission. 48 * 49 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 50 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 51 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 52 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 53 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 54 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 55 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 56 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 57 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 58 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 59 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 60 * 61 *****************************************************************************/ 62#ifndef __iwl_fw_api_location_h__ 63#define __iwl_fw_api_location_h__ 64 65/** 66 * enum iwl_location_subcmd_ids - location group command IDs 67 */ 68enum iwl_location_subcmd_ids { 69 /** 70 * @TOF_RANGE_REQ_CMD: TOF ranging request, 71 * uses &struct iwl_tof_range_req_cmd 72 */ 73 TOF_RANGE_REQ_CMD = 0x0, 74 /** 75 * @TOF_CONFIG_CMD: TOF configuration, uses &struct iwl_tof_config_cmd 76 */ 77 TOF_CONFIG_CMD = 0x1, 78 /** 79 * @TOF_RANGE_ABORT_CMD: abort ongoing ranging, uses 80 * &struct iwl_tof_range_abort_cmd 81 */ 82 TOF_RANGE_ABORT_CMD = 0x2, 83 /** 84 * @TOF_RANGE_REQ_EXT_CMD: TOF extended ranging config, 85 * uses &struct iwl_tof_range_request_ext_cmd 86 */ 87 TOF_RANGE_REQ_EXT_CMD = 0x3, 88 /** 89 * @TOF_RESPONDER_CONFIG_CMD: FTM responder configuration, 90 * uses &struct iwl_tof_responder_config_cmd 91 */ 92 TOF_RESPONDER_CONFIG_CMD = 0x4, 93 /** 94 * @TOF_RESPONDER_DYN_CONFIG_CMD: FTM dynamic configuration, 95 * uses &struct iwl_tof_responder_dyn_config_cmd 96 */ 97 TOF_RESPONDER_DYN_CONFIG_CMD = 0x5, 98 /** 99 * @CSI_HEADER_NOTIFICATION: CSI header 100 */ 101 CSI_HEADER_NOTIFICATION = 0xFA, 102 /** 103 * @CSI_CHUNKS_NOTIFICATION: CSI chunk, 104 * uses &struct iwl_csi_chunk_notification 105 */ 106 CSI_CHUNKS_NOTIFICATION = 0xFB, 107 /** 108 * @TOF_LC_NOTIF: used for LCI/civic location, contains just 109 * the action frame 110 */ 111 TOF_LC_NOTIF = 0xFC, 112 /** 113 * @TOF_RESPONDER_STATS: FTM responder statistics notification, 114 * uses &struct iwl_ftm_responder_stats 115 */ 116 TOF_RESPONDER_STATS = 0xFD, 117 /** 118 * @TOF_MCSI_DEBUG_NOTIF: MCSI debug notification, uses 119 * &struct iwl_tof_mcsi_notif 120 */ 121 TOF_MCSI_DEBUG_NOTIF = 0xFE, 122 /** 123 * @TOF_RANGE_RESPONSE_NOTIF: ranging response, using 124 * &struct iwl_tof_range_rsp_ntfy 125 */ 126 TOF_RANGE_RESPONSE_NOTIF = 0xFF, 127}; 128 129/** 130 * struct iwl_tof_config_cmd - ToF configuration 131 * @tof_disabled: indicates if ToF is disabled (or not) 132 * @one_sided_disabled: indicates if one-sided is disabled (or not) 133 * @is_debug_mode: indiciates if debug mode is active 134 * @is_buf_required: indicates if channel estimation buffer is required 135 */ 136struct iwl_tof_config_cmd { 137 u8 tof_disabled; 138 u8 one_sided_disabled; 139 u8 is_debug_mode; 140 u8 is_buf_required; 141} __packed; 142 143/** 144 * enum iwl_tof_bandwidth - values for iwl_tof_range_req_ap_entry.bandwidth 145 * @IWL_TOF_BW_20_LEGACY: 20 MHz non-HT 146 * @IWL_TOF_BW_20_HT: 20 MHz HT 147 * @IWL_TOF_BW_40: 40 MHz 148 * @IWL_TOF_BW_80: 80 MHz 149 * @IWL_TOF_BW_160: 160 MHz 150 */ 151enum iwl_tof_bandwidth { 152 IWL_TOF_BW_20_LEGACY, 153 IWL_TOF_BW_20_HT, 154 IWL_TOF_BW_40, 155 IWL_TOF_BW_80, 156 IWL_TOF_BW_160, 157}; /* LOCAT_BW_TYPE_E */ 158 159/* 160 * enum iwl_tof_algo_type - Algorithym type for range measurement request 161 */ 162enum iwl_tof_algo_type { 163 IWL_TOF_ALGO_TYPE_MAX_LIKE = 0, 164 IWL_TOF_ALGO_TYPE_LINEAR_REG = 1, 165 IWL_TOF_ALGO_TYPE_FFT = 2, 166 167 /* Keep last */ 168 IWL_TOF_ALGO_TYPE_INVALID, 169}; /* ALGO_TYPE_E */ 170 171/* 172 * enum iwl_tof_mcsi_ntfy - Enable/Disable MCSI notifications 173 */ 174enum iwl_tof_mcsi_enable { 175 IWL_TOF_MCSI_DISABLED = 0, 176 IWL_TOF_MCSI_ENABLED = 1, 177}; /* MCSI_ENABLE_E */ 178 179/** 180 * enum iwl_tof_responder_cmd_valid_field - valid fields in the responder cfg 181 * @IWL_TOF_RESPONDER_CMD_VALID_CHAN_INFO: channel info is valid 182 * @IWL_TOF_RESPONDER_CMD_VALID_TOA_OFFSET: ToA offset is valid 183 * @IWL_TOF_RESPONDER_CMD_VALID_COMMON_CALIB: common calibration mode is valid 184 * @IWL_TOF_RESPONDER_CMD_VALID_SPECIFIC_CALIB: spefici calibration mode is 185 * valid 186 * @IWL_TOF_RESPONDER_CMD_VALID_BSSID: BSSID is valid 187 * @IWL_TOF_RESPONDER_CMD_VALID_TX_ANT: TX antenna is valid 188 * @IWL_TOF_RESPONDER_CMD_VALID_ALGO_TYPE: algorithm type is valid 189 * @IWL_TOF_RESPONDER_CMD_VALID_NON_ASAP_SUPPORT: non-ASAP support is valid 190 * @IWL_TOF_RESPONDER_CMD_VALID_STATISTICS_REPORT_SUPPORT: statistics report 191 * support is valid 192 * @IWL_TOF_RESPONDER_CMD_VALID_MCSI_NOTIF_SUPPORT: MCSI notification support 193 * is valid 194 * @IWL_TOF_RESPONDER_CMD_VALID_FAST_ALGO_SUPPORT: fast algorithm support 195 * is valid 196 * @IWL_TOF_RESPONDER_CMD_VALID_RETRY_ON_ALGO_FAIL: retry on algorithm failure 197 * is valid 198 * @IWL_TOF_RESPONDER_CMD_VALID_STA_ID: station ID is valid 199 */ 200enum iwl_tof_responder_cmd_valid_field { 201 IWL_TOF_RESPONDER_CMD_VALID_CHAN_INFO = BIT(0), 202 IWL_TOF_RESPONDER_CMD_VALID_TOA_OFFSET = BIT(1), 203 IWL_TOF_RESPONDER_CMD_VALID_COMMON_CALIB = BIT(2), 204 IWL_TOF_RESPONDER_CMD_VALID_SPECIFIC_CALIB = BIT(3), 205 IWL_TOF_RESPONDER_CMD_VALID_BSSID = BIT(4), 206 IWL_TOF_RESPONDER_CMD_VALID_TX_ANT = BIT(5), 207 IWL_TOF_RESPONDER_CMD_VALID_ALGO_TYPE = BIT(6), 208 IWL_TOF_RESPONDER_CMD_VALID_NON_ASAP_SUPPORT = BIT(7), 209 IWL_TOF_RESPONDER_CMD_VALID_STATISTICS_REPORT_SUPPORT = BIT(8), 210 IWL_TOF_RESPONDER_CMD_VALID_MCSI_NOTIF_SUPPORT = BIT(9), 211 IWL_TOF_RESPONDER_CMD_VALID_FAST_ALGO_SUPPORT = BIT(10), 212 IWL_TOF_RESPONDER_CMD_VALID_RETRY_ON_ALGO_FAIL = BIT(11), 213 IWL_TOF_RESPONDER_CMD_VALID_STA_ID = BIT(12), 214}; 215 216/** 217 * enum iwl_tof_responder_cfg_flags - responder configuration flags 218 * @IWL_TOF_RESPONDER_FLAGS_NON_ASAP_SUPPORT: non-ASAP support 219 * @IWL_TOF_RESPONDER_FLAGS_REPORT_STATISTICS: report statistics 220 * @IWL_TOF_RESPONDER_FLAGS_REPORT_MCSI: report MCSI 221 * @IWL_TOF_RESPONDER_FLAGS_ALGO_TYPE: algorithm type 222 * @IWL_TOF_RESPONDER_FLAGS_TOA_OFFSET_MODE: ToA offset mode 223 * @IWL_TOF_RESPONDER_FLAGS_COMMON_CALIB_MODE: common calibration mode 224 * @IWL_TOF_RESPONDER_FLAGS_SPECIFIC_CALIB_MODE: specific calibration mode 225 * @IWL_TOF_RESPONDER_FLAGS_FAST_ALGO_SUPPORT: fast algorithm support 226 * @IWL_TOF_RESPONDER_FLAGS_RETRY_ON_ALGO_FAIL: retry on algorithm fail 227 * @IWL_TOF_RESPONDER_FLAGS_FTM_TX_ANT: TX antenna mask 228 */ 229enum iwl_tof_responder_cfg_flags { 230 IWL_TOF_RESPONDER_FLAGS_NON_ASAP_SUPPORT = BIT(0), 231 IWL_TOF_RESPONDER_FLAGS_REPORT_STATISTICS = BIT(1), 232 IWL_TOF_RESPONDER_FLAGS_REPORT_MCSI = BIT(2), 233 IWL_TOF_RESPONDER_FLAGS_ALGO_TYPE = BIT(3) | BIT(4) | BIT(5), 234 IWL_TOF_RESPONDER_FLAGS_TOA_OFFSET_MODE = BIT(6), 235 IWL_TOF_RESPONDER_FLAGS_COMMON_CALIB_MODE = BIT(7), 236 IWL_TOF_RESPONDER_FLAGS_SPECIFIC_CALIB_MODE = BIT(8), 237 IWL_TOF_RESPONDER_FLAGS_FAST_ALGO_SUPPORT = BIT(9), 238 IWL_TOF_RESPONDER_FLAGS_RETRY_ON_ALGO_FAIL = BIT(10), 239 IWL_TOF_RESPONDER_FLAGS_FTM_TX_ANT = RATE_MCS_ANT_ABC_MSK, 240}; 241 242/** 243 * struct iwl_tof_responder_config_cmd - ToF AP mode (for debug) 244 * @cmd_valid_fields: &iwl_tof_responder_cmd_valid_field 245 * @responder_cfg_flags: &iwl_tof_responder_cfg_flags 246 * @bandwidth: current AP Bandwidth: &enum iwl_tof_bandwidth 247 * @rate: current AP rate 248 * @channel_num: current AP Channel 249 * @ctrl_ch_position: coding of the control channel position relative to 250 * the center frequency, see iwl_mvm_get_ctrl_pos() 251 * @sta_id: index of the AP STA when in AP mode 252 * @reserved1: reserved 253 * @toa_offset: Artificial addition [pSec] for the ToA - to be used for debug 254 * purposes, simulating station movement by adding various values 255 * to this field 256 * @common_calib: XVT: common calibration value 257 * @specific_calib: XVT: specific calibration value 258 * @bssid: Current AP BSSID 259 * @reserved2: reserved 260 */ 261struct iwl_tof_responder_config_cmd { 262 __le32 cmd_valid_fields; 263 __le32 responder_cfg_flags; 264 u8 bandwidth; 265 u8 rate; 266 u8 channel_num; 267 u8 ctrl_ch_position; 268 u8 sta_id; 269 u8 reserved1; 270 __le16 toa_offset; 271 __le16 common_calib; 272 __le16 specific_calib; 273 u8 bssid[ETH_ALEN]; 274 __le16 reserved2; 275} __packed; /* TOF_RESPONDER_CONFIG_CMD_API_S_VER_6 */ 276 277#define IWL_LCI_CIVIC_IE_MAX_SIZE 400 278 279/** 280 * struct iwl_tof_responder_dyn_config_cmd - Dynamic responder settings 281 * @lci_len: The length of the 1st (LCI) part in the @lci_civic buffer 282 * @civic_len: The length of the 2nd (CIVIC) part in the @lci_civic buffer 283 * @lci_civic: The LCI/CIVIC buffer. LCI data (if exists) comes first, then, if 284 * needed, 0-padding such that the next part is dword-aligned, then CIVIC 285 * data (if exists) follows, and then 0-padding again to complete a 286 * 4-multiple long buffer. 287 */ 288struct iwl_tof_responder_dyn_config_cmd { 289 __le32 lci_len; 290 __le32 civic_len; 291 u8 lci_civic[]; 292} __packed; /* TOF_RESPONDER_DYN_CONFIG_CMD_API_S_VER_2 */ 293 294/** 295 * struct iwl_tof_range_request_ext_cmd - extended range req for WLS 296 * @tsf_timer_offset_msec: the recommended time offset (mSec) from the AP's TSF 297 * @reserved: reserved 298 * @min_delta_ftm: Minimal time between two consecutive measurements, 299 * in units of 100us. 0 means no preference by station 300 * @ftm_format_and_bw20M: FTM Channel Spacing/Format for 20MHz: recommended 301 * value be sent to the AP 302 * @ftm_format_and_bw40M: FTM Channel Spacing/Format for 40MHz: recommended 303 * value to be sent to the AP 304 * @ftm_format_and_bw80M: FTM Channel Spacing/Format for 80MHz: recommended 305 * value to be sent to the AP 306 */ 307struct iwl_tof_range_req_ext_cmd { 308 __le16 tsf_timer_offset_msec; 309 __le16 reserved; 310 u8 min_delta_ftm; 311 u8 ftm_format_and_bw20M; 312 u8 ftm_format_and_bw40M; 313 u8 ftm_format_and_bw80M; 314} __packed; 315 316/** 317 * enum iwl_tof_location_query - values for query bitmap 318 * @IWL_TOF_LOC_LCI: query LCI 319 * @IWL_TOF_LOC_CIVIC: query civic 320 */ 321enum iwl_tof_location_query { 322 IWL_TOF_LOC_LCI = 0x01, 323 IWL_TOF_LOC_CIVIC = 0x02, 324}; 325 326 /** 327 * struct iwl_tof_range_req_ap_entry_v2 - AP configuration parameters 328 * @channel_num: Current AP Channel 329 * @bandwidth: Current AP Bandwidth. One of iwl_tof_bandwidth. 330 * @tsf_delta_direction: TSF relatively to the subject AP 331 * @ctrl_ch_position: Coding of the control channel position relative to the 332 * center frequency, see iwl_mvm_get_ctrl_pos(). 333 * @bssid: AP's BSSID 334 * @measure_type: Measurement type: 0 - two sided, 1 - One sided 335 * @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of the 336 * number of measurement iterations (min 2^0 = 1, max 2^14) 337 * @burst_period: Recommended value to be sent to the AP. Measurement 338 * periodicity In units of 100ms. ignored if num_of_bursts = 0 339 * @samples_per_burst: 2-sided: the number of FTMs pairs in single Burst (1-31); 340 * 1-sided: how many rts/cts pairs should be used per burst. 341 * @retries_per_sample: Max number of retries that the LMAC should send 342 * in case of no replies by the AP. 343 * @tsf_delta: TSF Delta in units of microseconds. 344 * The difference between the AP TSF and the device local clock. 345 * @location_req: Location Request Bit[0] LCI should be sent in the FTMR; 346 * Bit[1] Civic should be sent in the FTMR 347 * @asap_mode: 0 - non asap mode, 1 - asap mode (not relevant for one sided) 348 * @enable_dyn_ack: Enable Dynamic ACK BW. 349 * 0: Initiator interact with regular AP; 350 * 1: Initiator interact with Responder machine: need to send the 351 * Initiator Acks with HT 40MHz / 80MHz, since the Responder should 352 * use it for its ch est measurement (this flag will be set when we 353 * configure the opposite machine to be Responder). 354 * @rssi: Last received value 355 * legal values: -128-0 (0x7f). above 0x0 indicating an invalid value. 356 * @algo_type: &enum iwl_tof_algo_type 357 * @notify_mcsi: &enum iwl_tof_mcsi_ntfy. 358 * @reserved: For alignment and future use 359 */ 360struct iwl_tof_range_req_ap_entry_v2 { 361 u8 channel_num; 362 u8 bandwidth; 363 u8 tsf_delta_direction; 364 u8 ctrl_ch_position; 365 u8 bssid[ETH_ALEN]; 366 u8 measure_type; 367 u8 num_of_bursts; 368 __le16 burst_period; 369 u8 samples_per_burst; 370 u8 retries_per_sample; 371 __le32 tsf_delta; 372 u8 location_req; 373 u8 asap_mode; 374 u8 enable_dyn_ack; 375 s8 rssi; 376 u8 algo_type; 377 u8 notify_mcsi; 378 __le16 reserved; 379} __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_2 */ 380 381/** 382 * enum iwl_initiator_ap_flags - per responder FTM configuration flags 383 * @IWL_INITIATOR_AP_FLAGS_ASAP: Request for ASAP measurement. 384 * @IWL_INITIATOR_AP_FLAGS_LCI_REQUEST: Request for LCI information 385 * @IWL_INITIATOR_AP_FLAGS_CIVIC_REQUEST: Request for CIVIC information 386 * @IWL_INITIATOR_AP_FLAGS_DYN_ACK: Send HT/VHT ack for FTM frames. If not set, 387 * 20Mhz dup acks will be sent. 388 * @IWL_INITIATOR_AP_FLAGS_ALGO_LR: Use LR algo type for rtt calculation. 389 * Default algo type is ML. 390 * @IWL_INITIATOR_AP_FLAGS_ALGO_FFT: Use FFT algo type for rtt calculation. 391 * Default algo type is ML. 392 * @IWL_INITIATOR_AP_FLAGS_MCSI_REPORT: Send the MCSI for each FTM frame to the 393 * driver. 394 */ 395enum iwl_initiator_ap_flags { 396 IWL_INITIATOR_AP_FLAGS_ASAP = BIT(1), 397 IWL_INITIATOR_AP_FLAGS_LCI_REQUEST = BIT(2), 398 IWL_INITIATOR_AP_FLAGS_CIVIC_REQUEST = BIT(3), 399 IWL_INITIATOR_AP_FLAGS_DYN_ACK = BIT(4), 400 IWL_INITIATOR_AP_FLAGS_ALGO_LR = BIT(5), 401 IWL_INITIATOR_AP_FLAGS_ALGO_FFT = BIT(6), 402 IWL_INITIATOR_AP_FLAGS_MCSI_REPORT = BIT(8), 403}; 404 405/** 406 * struct iwl_tof_range_req_ap_entry - AP configuration parameters 407 * @initiator_ap_flags: see &enum iwl_initiator_ap_flags. 408 * @channel_num: AP Channel number 409 * @bandwidth: AP bandwidth. One of iwl_tof_bandwidth. 410 * @ctrl_ch_position: Coding of the control channel position relative to the 411 * center frequency, see iwl_mvm_get_ctrl_pos(). 412 * @ftmr_max_retries: Max number of retries to send the FTMR in case of no 413 * reply from the AP. 414 * @bssid: AP's BSSID 415 * @burst_period: Recommended value to be sent to the AP. Measurement 416 * periodicity In units of 100ms. ignored if num_of_bursts_exp = 0 417 * @samples_per_burst: the number of FTMs pairs in single Burst (1-31); 418 * @num_of_bursts: Recommended value to be sent to the AP. 2s Exponent of 419 * the number of measurement iterations (min 2^0 = 1, max 2^14) 420 * @reserved: For alignment and future use 421 * @tsf_delta: not in use 422 */ 423struct iwl_tof_range_req_ap_entry { 424 __le32 initiator_ap_flags; 425 u8 channel_num; 426 u8 bandwidth; 427 u8 ctrl_ch_position; 428 u8 ftmr_max_retries; 429 u8 bssid[ETH_ALEN]; 430 __le16 burst_period; 431 u8 samples_per_burst; 432 u8 num_of_bursts; 433 __le16 reserved; 434 __le32 tsf_delta; 435} __packed; /* LOCATION_RANGE_REQ_AP_ENTRY_CMD_API_S_VER_3 */ 436 437/** 438 * enum iwl_tof_response_mode 439 * @IWL_MVM_TOF_RESPONSE_ASAP: report each AP measurement separately as soon as 440 * possible (not supported for this release) 441 * @IWL_MVM_TOF_RESPONSE_TIMEOUT: report all AP measurements as a batch upon 442 * timeout expiration 443 * @IWL_MVM_TOF_RESPONSE_COMPLETE: report all AP measurements as a batch at the 444 * earlier of: measurements completion / timeout 445 * expiration. 446 */ 447enum iwl_tof_response_mode { 448 IWL_MVM_TOF_RESPONSE_ASAP, 449 IWL_MVM_TOF_RESPONSE_TIMEOUT, 450 IWL_MVM_TOF_RESPONSE_COMPLETE, 451}; 452 453/** 454 * enum iwl_tof_initiator_flags 455 * 456 * @IWL_TOF_INITIATOR_FLAGS_FAST_ALGO_DISABLED: disable fast algo, meaning run 457 * the algo on ant A+B, instead of only one of them. 458 * @IWL_TOF_INITIATOR_FLAGS_RX_CHAIN_SEL_A: open RX antenna A for FTMs RX 459 * @IWL_TOF_INITIATOR_FLAGS_RX_CHAIN_SEL_B: open RX antenna B for FTMs RX 460 * @IWL_TOF_INITIATOR_FLAGS_RX_CHAIN_SEL_C: open RX antenna C for FTMs RX 461 * @IWL_TOF_INITIATOR_FLAGS_TX_CHAIN_SEL_A: use antenna A fo TX ACKs during FTM 462 * @IWL_TOF_INITIATOR_FLAGS_TX_CHAIN_SEL_B: use antenna B fo TX ACKs during FTM 463 * @IWL_TOF_INITIATOR_FLAGS_TX_CHAIN_SEL_C: use antenna C fo TX ACKs during FTM 464 * @IWL_TOF_INITIATOR_FLAGS_MACADDR_RANDOM: use random mac address for FTM 465 * @IWL_TOF_INITIATOR_FLAGS_SPECIFIC_CALIB: use the specific calib value from 466 * the range request command 467 * @IWL_TOF_INITIATOR_FLAGS_COMMON_CALIB: use the common calib value from the 468 * ragne request command 469 * @IWL_TOF_INITIATOR_FLAGS_NON_ASAP_SUPPORT: support non-asap measurements 470 */ 471enum iwl_tof_initiator_flags { 472 IWL_TOF_INITIATOR_FLAGS_FAST_ALGO_DISABLED = BIT(0), 473 IWL_TOF_INITIATOR_FLAGS_RX_CHAIN_SEL_A = BIT(1), 474 IWL_TOF_INITIATOR_FLAGS_RX_CHAIN_SEL_B = BIT(2), 475 IWL_TOF_INITIATOR_FLAGS_RX_CHAIN_SEL_C = BIT(3), 476 IWL_TOF_INITIATOR_FLAGS_TX_CHAIN_SEL_A = BIT(4), 477 IWL_TOF_INITIATOR_FLAGS_TX_CHAIN_SEL_B = BIT(5), 478 IWL_TOF_INITIATOR_FLAGS_TX_CHAIN_SEL_C = BIT(6), 479 IWL_TOF_INITIATOR_FLAGS_MACADDR_RANDOM = BIT(7), 480 IWL_TOF_INITIATOR_FLAGS_SPECIFIC_CALIB = BIT(15), 481 IWL_TOF_INITIATOR_FLAGS_COMMON_CALIB = BIT(16), 482 IWL_TOF_INITIATOR_FLAGS_NON_ASAP_SUPPORT = BIT(20), 483}; /* LOCATION_RANGE_REQ_CMD_API_S_VER_5 */ 484 485#define IWL_MVM_TOF_MAX_APS 5 486#define IWL_MVM_TOF_MAX_TWO_SIDED_APS 5 487 488/** 489 * struct iwl_tof_range_req_cmd_v5 - start measurement cmd 490 * @initiator_flags: see flags @ iwl_tof_initiator_flags 491 * @request_id: A Token incremented per request. The same Token will be 492 * sent back in the range response 493 * @initiator: 0- NW initiated, 1 - Client Initiated 494 * @one_sided_los_disable: '0'- run ML-Algo for both ToF/OneSided, 495 * '1' - run ML-Algo for ToF only 496 * @req_timeout: Requested timeout of the response in units of 100ms. 497 * This is equivalent to the session time configured to the 498 * LMAC in Initiator Request 499 * @report_policy: Supported partially for this release: For current release - 500 * the range report will be uploaded as a batch when ready or 501 * when the session is done (successfully / partially). 502 * one of iwl_tof_response_mode. 503 * @reserved0: reserved 504 * @num_of_ap: Number of APs to measure (error if > IWL_MVM_TOF_MAX_APS) 505 * @macaddr_random: '0' Use default source MAC address (i.e. p2_p), 506 * '1' Use MAC Address randomization according to the below 507 * @range_req_bssid: ranging request BSSID 508 * @macaddr_template: MAC address template to use for non-randomized bits 509 * @macaddr_mask: Bits set to 0 shall be copied from the MAC address template. 510 * Bits set to 1 shall be randomized by the UMAC 511 * @ftm_rx_chains: Rx chain to open to receive Responder's FTMs (XVT) 512 * @ftm_tx_chains: Tx chain to send the ack to the Responder FTM (XVT) 513 * @common_calib: The common calib value to inject to this measurement calc 514 * @specific_calib: The specific calib value to inject to this measurement calc 515 * @ap: per-AP request data 516 */ 517struct iwl_tof_range_req_cmd_v5 { 518 __le32 initiator_flags; 519 u8 request_id; 520 u8 initiator; 521 u8 one_sided_los_disable; 522 u8 req_timeout; 523 u8 report_policy; 524 u8 reserved0; 525 u8 num_of_ap; 526 u8 macaddr_random; 527 u8 range_req_bssid[ETH_ALEN]; 528 u8 macaddr_template[ETH_ALEN]; 529 u8 macaddr_mask[ETH_ALEN]; 530 u8 ftm_rx_chains; 531 u8 ftm_tx_chains; 532 __le16 common_calib; 533 __le16 specific_calib; 534 struct iwl_tof_range_req_ap_entry_v2 ap[IWL_MVM_TOF_MAX_APS]; 535} __packed; 536/* LOCATION_RANGE_REQ_CMD_API_S_VER_5 */ 537 538/** 539 * struct iwl_tof_range_req_cmd - start measurement cmd 540 * @initiator_flags: see flags @ iwl_tof_initiator_flags 541 * @request_id: A Token incremented per request. The same Token will be 542 * sent back in the range response 543 * @num_of_ap: Number of APs to measure (error if > IWL_MVM_TOF_MAX_APS) 544 * @range_req_bssid: ranging request BSSID 545 * @macaddr_mask: Bits set to 0 shall be copied from the MAC address template. 546 * Bits set to 1 shall be randomized by the UMAC 547 * @macaddr_template: MAC address template to use for non-randomized bits 548 * @req_timeout_ms: Requested timeout of the response in units of milliseconds. 549 * This is the session time for completing the measurement. 550 * @tsf_mac_id: report the measurement start time for each ap in terms of the 551 * TSF of this mac id. 0xff to disable TSF reporting. 552 * @common_calib: The common calib value to inject to this measurement calc 553 * @specific_calib: The specific calib value to inject to this measurement calc 554 * @ap: per-AP request data, see &struct iwl_tof_range_req_ap_entry_v2. 555 */ 556struct iwl_tof_range_req_cmd { 557 __le32 initiator_flags; 558 u8 request_id; 559 u8 num_of_ap; 560 u8 range_req_bssid[ETH_ALEN]; 561 u8 macaddr_mask[ETH_ALEN]; 562 u8 macaddr_template[ETH_ALEN]; 563 __le32 req_timeout_ms; 564 __le32 tsf_mac_id; 565 __le16 common_calib; 566 __le16 specific_calib; 567 struct iwl_tof_range_req_ap_entry ap[IWL_MVM_TOF_MAX_APS]; 568} __packed; /* LOCATION_RANGE_REQ_CMD_API_S_VER_7 */ 569 570/* 571 * enum iwl_tof_range_request_status - status of the sent request 572 * @IWL_TOF_RANGE_REQUEST_STATUS_SUCCESSFUL - FW successfully received the 573 * request 574 * @IWL_TOF_RANGE_REQUEST_STATUS_BUSY - FW is busy with a previous request, the 575 * sent request will not be handled 576 */ 577enum iwl_tof_range_request_status { 578 IWL_TOF_RANGE_REQUEST_STATUS_SUCCESS, 579 IWL_TOF_RANGE_REQUEST_STATUS_BUSY, 580}; 581 582/** 583 * enum iwl_tof_entry_status 584 * 585 * @IWL_TOF_ENTRY_SUCCESS: successful measurement. 586 * @IWL_TOF_ENTRY_GENERAL_FAILURE: General failure. 587 * @IWL_TOF_ENTRY_NO_RESPONSE: Responder didn't reply to the request. 588 * @IWL_TOF_ENTRY_REQUEST_REJECTED: Responder rejected the request. 589 * @IWL_TOF_ENTRY_NOT_SCHEDULED: Time event was scheduled but not called yet. 590 * @IWL_TOF_ENTRY_TIMING_MEASURE_TIMEOUT: Time event triggered but no 591 * measurement was completed. 592 * @IWL_TOF_ENTRY_TARGET_DIFF_CH_CANNOT_CHANGE: No range due inability to switch 593 * from the primary channel. 594 * @IWL_TOF_ENTRY_RANGE_NOT_SUPPORTED: Device doesn't support FTM. 595 * @IWL_TOF_ENTRY_REQUEST_ABORT_UNKNOWN_REASON: Request aborted due to unknown 596 * reason. 597 * @IWL_TOF_ENTRY_LOCATION_INVALID_T1_T4_TIME_STAMP: Failure due to invalid 598 * T1/T4. 599 * @IWL_TOF_ENTRY_11MC_PROTOCOL_FAILURE: Failure due to invalid FTM frame 600 * structure. 601 * @IWL_TOF_ENTRY_REQUEST_CANNOT_SCHED: Request cannot be scheduled. 602 * @IWL_TOF_ENTRY_RESPONDER_CANNOT_COLABORATE: Responder cannot serve the 603 * initiator for some period, period supplied in @refusal_period. 604 * @IWL_TOF_ENTRY_BAD_REQUEST_ARGS: Bad request arguments. 605 * @IWL_TOF_ENTRY_WIFI_NOT_ENABLED: Wifi not enabled. 606 * @IWL_TOF_ENTRY_RESPONDER_OVERRIDE_PARAMS: Responder override the original 607 * parameters within the current session. 608 */ 609enum iwl_tof_entry_status { 610 IWL_TOF_ENTRY_SUCCESS = 0, 611 IWL_TOF_ENTRY_GENERAL_FAILURE = 1, 612 IWL_TOF_ENTRY_NO_RESPONSE = 2, 613 IWL_TOF_ENTRY_REQUEST_REJECTED = 3, 614 IWL_TOF_ENTRY_NOT_SCHEDULED = 4, 615 IWL_TOF_ENTRY_TIMING_MEASURE_TIMEOUT = 5, 616 IWL_TOF_ENTRY_TARGET_DIFF_CH_CANNOT_CHANGE = 6, 617 IWL_TOF_ENTRY_RANGE_NOT_SUPPORTED = 7, 618 IWL_TOF_ENTRY_REQUEST_ABORT_UNKNOWN_REASON = 8, 619 IWL_TOF_ENTRY_LOCATION_INVALID_T1_T4_TIME_STAMP = 9, 620 IWL_TOF_ENTRY_11MC_PROTOCOL_FAILURE = 10, 621 IWL_TOF_ENTRY_REQUEST_CANNOT_SCHED = 11, 622 IWL_TOF_ENTRY_RESPONDER_CANNOT_COLABORATE = 12, 623 IWL_TOF_ENTRY_BAD_REQUEST_ARGS = 13, 624 IWL_TOF_ENTRY_WIFI_NOT_ENABLED = 14, 625 IWL_TOF_ENTRY_RESPONDER_OVERRIDE_PARAMS = 15, 626}; /* LOCATION_RANGE_RSP_AP_ENTRY_NTFY_API_S_VER_2 */ 627 628/** 629 * struct iwl_tof_range_rsp_ap_entry_ntfy_v3 - AP parameters (response) 630 * @bssid: BSSID of the AP 631 * @measure_status: current APs measurement status, one of 632 * &enum iwl_tof_entry_status. 633 * @measure_bw: Current AP Bandwidth: 0 20MHz, 1 40MHz, 2 80MHz 634 * @rtt: The Round Trip Time that took for the last measurement for 635 * current AP [pSec] 636 * @rtt_variance: The Variance of the RTT values measured for current AP 637 * @rtt_spread: The Difference between the maximum and the minimum RTT 638 * values measured for current AP in the current session [pSec] 639 * @rssi: RSSI as uploaded in the Channel Estimation notification 640 * @rssi_spread: The Difference between the maximum and the minimum RSSI values 641 * measured for current AP in the current session 642 * @reserved: reserved 643 * @refusal_period: refusal period in case of 644 * @IWL_TOF_ENTRY_RESPONDER_CANNOT_COLABORATE [sec] 645 * @range: Measured range [cm] 646 * @range_variance: Measured range variance [cm] 647 * @timestamp: The GP2 Clock [usec] where Channel Estimation notification was 648 * uploaded by the LMAC 649 * @t2t3_initiator: as calculated from the algo in the initiator 650 * @t1t4_responder: as calculated from the algo in the responder 651 * @common_calib: Calib val that was used in for this AP measurement 652 * @specific_calib: val that was used in for this AP measurement 653 * @papd_calib_output: The result of the tof papd calibration that was injected 654 * into the algorithm. 655 */ 656struct iwl_tof_range_rsp_ap_entry_ntfy_v3 { 657 u8 bssid[ETH_ALEN]; 658 u8 measure_status; 659 u8 measure_bw; 660 __le32 rtt; 661 __le32 rtt_variance; 662 __le32 rtt_spread; 663 s8 rssi; 664 u8 rssi_spread; 665 u8 reserved; 666 u8 refusal_period; 667 __le32 range; 668 __le32 range_variance; 669 __le32 timestamp; 670 __le32 t2t3_initiator; 671 __le32 t1t4_responder; 672 __le16 common_calib; 673 __le16 specific_calib; 674 __le32 papd_calib_output; 675} __packed; /* LOCATION_RANGE_RSP_AP_ETRY_NTFY_API_S_VER_3 */ 676 677/** 678 * struct iwl_tof_range_rsp_ap_entry_ntfy_v4 - AP parameters (response) 679 * @bssid: BSSID of the AP 680 * @measure_status: current APs measurement status, one of 681 * &enum iwl_tof_entry_status. 682 * @measure_bw: Current AP Bandwidth: 0 20MHz, 1 40MHz, 2 80MHz 683 * @rtt: The Round Trip Time that took for the last measurement for 684 * current AP [pSec] 685 * @rtt_variance: The Variance of the RTT values measured for current AP 686 * @rtt_spread: The Difference between the maximum and the minimum RTT 687 * values measured for current AP in the current session [pSec] 688 * @rssi: RSSI as uploaded in the Channel Estimation notification 689 * @rssi_spread: The Difference between the maximum and the minimum RSSI values 690 * measured for current AP in the current session 691 * @last_burst: 1 if no more FTM sessions are scheduled for this responder 692 * @refusal_period: refusal period in case of 693 * @IWL_TOF_ENTRY_RESPONDER_CANNOT_COLABORATE [sec] 694 * @timestamp: The GP2 Clock [usec] where Channel Estimation notification was 695 * uploaded by the LMAC 696 * @start_tsf: measurement start time in TSF of the mac specified in the range 697 * request 698 * @rx_rate_n_flags: rate and flags of the last FTM frame received from this 699 * responder 700 * @tx_rate_n_flags: rate and flags of the last ack sent to this responder 701 * @t2t3_initiator: as calculated from the algo in the initiator 702 * @t1t4_responder: as calculated from the algo in the responder 703 * @common_calib: Calib val that was used in for this AP measurement 704 * @specific_calib: val that was used in for this AP measurement 705 * @papd_calib_output: The result of the tof papd calibration that was injected 706 * into the algorithm. 707 */ 708struct iwl_tof_range_rsp_ap_entry_ntfy_v4 { 709 u8 bssid[ETH_ALEN]; 710 u8 measure_status; 711 u8 measure_bw; 712 __le32 rtt; 713 __le32 rtt_variance; 714 __le32 rtt_spread; 715 s8 rssi; 716 u8 rssi_spread; 717 u8 last_burst; 718 u8 refusal_period; 719 __le32 timestamp; 720 __le32 start_tsf; 721 __le32 rx_rate_n_flags; 722 __le32 tx_rate_n_flags; 723 __le32 t2t3_initiator; 724 __le32 t1t4_responder; 725 __le16 common_calib; 726 __le16 specific_calib; 727 __le32 papd_calib_output; 728} __packed; /* LOCATION_RANGE_RSP_AP_ETRY_NTFY_API_S_VER_4 */ 729 730/** 731 * struct iwl_tof_range_rsp_ap_entry_ntfy - AP parameters (response) 732 * @bssid: BSSID of the AP 733 * @measure_status: current APs measurement status, one of 734 * &enum iwl_tof_entry_status. 735 * @measure_bw: Current AP Bandwidth: 0 20MHz, 1 40MHz, 2 80MHz 736 * @rtt: The Round Trip Time that took for the last measurement for 737 * current AP [pSec] 738 * @rtt_variance: The Variance of the RTT values measured for current AP 739 * @rtt_spread: The Difference between the maximum and the minimum RTT 740 * values measured for current AP in the current session [pSec] 741 * @rssi: RSSI as uploaded in the Channel Estimation notification 742 * @rssi_spread: The Difference between the maximum and the minimum RSSI values 743 * measured for current AP in the current session 744 * @last_burst: 1 if no more FTM sessions are scheduled for this responder 745 * @refusal_period: refusal period in case of 746 * @IWL_TOF_ENTRY_RESPONDER_CANNOT_COLABORATE [sec] 747 * @timestamp: The GP2 Clock [usec] where Channel Estimation notification was 748 * uploaded by the LMAC 749 * @start_tsf: measurement start time in TSF of the mac specified in the range 750 * request 751 * @rx_rate_n_flags: rate and flags of the last FTM frame received from this 752 * responder 753 * @tx_rate_n_flags: rate and flags of the last ack sent to this responder 754 * @t2t3_initiator: as calculated from the algo in the initiator 755 * @t1t4_responder: as calculated from the algo in the responder 756 * @common_calib: Calib val that was used in for this AP measurement 757 * @specific_calib: val that was used in for this AP measurement 758 * @papd_calib_output: The result of the tof papd calibration that was injected 759 * into the algorithm. 760 * @rttConfidence: a value between 0 - 31 that represents the rtt accuracy. 761 * @reserved: for alignment 762 */ 763struct iwl_tof_range_rsp_ap_entry_ntfy { 764 u8 bssid[ETH_ALEN]; 765 u8 measure_status; 766 u8 measure_bw; 767 __le32 rtt; 768 __le32 rtt_variance; 769 __le32 rtt_spread; 770 s8 rssi; 771 u8 rssi_spread; 772 u8 last_burst; 773 u8 refusal_period; 774 __le32 timestamp; 775 __le32 start_tsf; 776 __le32 rx_rate_n_flags; 777 __le32 tx_rate_n_flags; 778 __le32 t2t3_initiator; 779 __le32 t1t4_responder; 780 __le16 common_calib; 781 __le16 specific_calib; 782 __le32 papd_calib_output; 783 u8 rttConfidence; 784 u8 reserved[3]; 785} __packed; /* LOCATION_RANGE_RSP_AP_ETRY_NTFY_API_S_VER_5 */ 786 787/** 788 * enum iwl_tof_response_status - tof response status 789 * 790 * @IWL_TOF_RESPONSE_SUCCESS: successful range. 791 * @IWL_TOF_RESPONSE_TIMEOUT: request aborted due to timeout expiration. 792 * partial result of ranges done so far is included in the response. 793 * @IWL_TOF_RESPONSE_ABORTED: Measurement aborted by command. 794 * @IWL_TOF_RESPONSE_FAILED: Measurement request command failed. 795 */ 796enum iwl_tof_response_status { 797 IWL_TOF_RESPONSE_SUCCESS = 0, 798 IWL_TOF_RESPONSE_TIMEOUT = 1, 799 IWL_TOF_RESPONSE_ABORTED = 4, 800 IWL_TOF_RESPONSE_FAILED = 5, 801}; /* LOCATION_RNG_RSP_STATUS */ 802 803/** 804 * struct iwl_tof_range_rsp_ntfy_v5 - ranging response notification 805 * @request_id: A Token ID of the corresponding Range request 806 * @request_status: status of current measurement session, one of 807 * &enum iwl_tof_response_status. 808 * @last_in_batch: reprot policy (when not all responses are uploaded at once) 809 * @num_of_aps: Number of APs to measure (error if > IWL_MVM_TOF_MAX_APS) 810 * @ap: per-AP data 811 */ 812struct iwl_tof_range_rsp_ntfy_v5 { 813 u8 request_id; 814 u8 request_status; 815 u8 last_in_batch; 816 u8 num_of_aps; 817 struct iwl_tof_range_rsp_ap_entry_ntfy_v3 ap[IWL_MVM_TOF_MAX_APS]; 818} __packed; /* LOCATION_RANGE_RSP_NTFY_API_S_VER_5 */ 819 820/** 821 * struct iwl_tof_range_rsp_ntfy_v6 - ranging response notification 822 * @request_id: A Token ID of the corresponding Range request 823 * @num_of_aps: Number of APs results 824 * @last_report: 1 if no more FTM sessions are scheduled, 0 otherwise. 825 * @reserved: reserved 826 * @ap: per-AP data 827 */ 828struct iwl_tof_range_rsp_ntfy_v6 { 829 u8 request_id; 830 u8 num_of_aps; 831 u8 last_report; 832 u8 reserved; 833 struct iwl_tof_range_rsp_ap_entry_ntfy_v4 ap[IWL_MVM_TOF_MAX_APS]; 834} __packed; /* LOCATION_RANGE_RSP_NTFY_API_S_VER_6 */ 835 836/** 837 * struct iwl_tof_range_rsp_ntfy - ranging response notification 838 * @request_id: A Token ID of the corresponding Range request 839 * @num_of_aps: Number of APs results 840 * @last_report: 1 if no more FTM sessions are scheduled, 0 otherwise. 841 * @reserved: reserved 842 * @ap: per-AP data 843 */ 844struct iwl_tof_range_rsp_ntfy { 845 u8 request_id; 846 u8 num_of_aps; 847 u8 last_report; 848 u8 reserved; 849 struct iwl_tof_range_rsp_ap_entry_ntfy ap[IWL_MVM_TOF_MAX_APS]; 850} __packed; /* LOCATION_RANGE_RSP_NTFY_API_S_VER_7 */ 851 852#define IWL_MVM_TOF_MCSI_BUF_SIZE (245) 853/** 854 * struct iwl_tof_mcsi_notif - used for debug 855 * @token: token ID for the current session 856 * @role: '0' - initiator, '1' - responder 857 * @reserved: reserved 858 * @initiator_bssid: initiator machine 859 * @responder_bssid: responder machine 860 * @mcsi_buffer: debug data 861 */ 862struct iwl_tof_mcsi_notif { 863 u8 token; 864 u8 role; 865 __le16 reserved; 866 u8 initiator_bssid[ETH_ALEN]; 867 u8 responder_bssid[ETH_ALEN]; 868 u8 mcsi_buffer[IWL_MVM_TOF_MCSI_BUF_SIZE * 4]; 869} __packed; 870 871/** 872 * struct iwl_tof_range_abort_cmd 873 * @request_id: corresponds to a range request 874 * @reserved: reserved 875 */ 876struct iwl_tof_range_abort_cmd { 877 u8 request_id; 878 u8 reserved[3]; 879} __packed; 880 881enum ftm_responder_stats_flags { 882 FTM_RESP_STAT_NON_ASAP_STARTED = BIT(0), 883 FTM_RESP_STAT_NON_ASAP_IN_WIN = BIT(1), 884 FTM_RESP_STAT_NON_ASAP_OUT_WIN = BIT(2), 885 FTM_RESP_STAT_TRIGGER_DUP = BIT(3), 886 FTM_RESP_STAT_DUP = BIT(4), 887 FTM_RESP_STAT_DUP_IN_WIN = BIT(5), 888 FTM_RESP_STAT_DUP_OUT_WIN = BIT(6), 889 FTM_RESP_STAT_SCHED_SUCCESS = BIT(7), 890 FTM_RESP_STAT_ASAP_REQ = BIT(8), 891 FTM_RESP_STAT_NON_ASAP_REQ = BIT(9), 892 FTM_RESP_STAT_ASAP_RESP = BIT(10), 893 FTM_RESP_STAT_NON_ASAP_RESP = BIT(11), 894 FTM_RESP_STAT_FAIL_INITIATOR_INACTIVE = BIT(12), 895 FTM_RESP_STAT_FAIL_INITIATOR_OUT_WIN = BIT(13), 896 FTM_RESP_STAT_FAIL_INITIATOR_RETRY_LIM = BIT(14), 897 FTM_RESP_STAT_FAIL_NEXT_SERVED = BIT(15), 898 FTM_RESP_STAT_FAIL_TRIGGER_ERR = BIT(16), 899 FTM_RESP_STAT_FAIL_GC = BIT(17), 900 FTM_RESP_STAT_SUCCESS = BIT(18), 901 FTM_RESP_STAT_INTEL_IE = BIT(19), 902 FTM_RESP_STAT_INITIATOR_ACTIVE = BIT(20), 903 FTM_RESP_STAT_MEASUREMENTS_AVAILABLE = BIT(21), 904 FTM_RESP_STAT_TRIGGER_UNKNOWN = BIT(22), 905 FTM_RESP_STAT_PROCESS_FAIL = BIT(23), 906 FTM_RESP_STAT_ACK = BIT(24), 907 FTM_RESP_STAT_NACK = BIT(25), 908 FTM_RESP_STAT_INVALID_INITIATOR_ID = BIT(26), 909 FTM_RESP_STAT_TIMER_MIN_DELTA = BIT(27), 910 FTM_RESP_STAT_INITIATOR_REMOVED = BIT(28), 911 FTM_RESP_STAT_INITIATOR_ADDED = BIT(29), 912 FTM_RESP_STAT_ERR_LIST_FULL = BIT(30), 913 FTM_RESP_STAT_INITIATOR_SCHED_NOW = BIT(31), 914}; /* RESP_IND_E */ 915 916/** 917 * struct iwl_ftm_responder_stats - FTM responder statistics 918 * @addr: initiator address 919 * @success_ftm: number of successful ftm frames 920 * @ftm_per_burst: num of FTM frames that were received 921 * @flags: &enum ftm_responder_stats_flags 922 * @duration: actual duration of FTM 923 * @allocated_duration: time that was allocated for this FTM session 924 * @bw: FTM request bandwidth 925 * @rate: FTM request rate 926 * @reserved: for alingment and future use 927 */ 928struct iwl_ftm_responder_stats { 929 u8 addr[ETH_ALEN]; 930 u8 success_ftm; 931 u8 ftm_per_burst; 932 __le32 flags; 933 __le32 duration; 934 __le32 allocated_duration; 935 u8 bw; 936 u8 rate; 937 __le16 reserved; 938} __packed; /* TOF_RESPONDER_STATISTICS_NTFY_S_VER_2 */ 939 940#define IWL_CSI_MAX_EXPECTED_CHUNKS 16 941 942#define IWL_CSI_CHUNK_CTL_NUM_MASK_VER_1 0x0003 943#define IWL_CSI_CHUNK_CTL_IDX_MASK_VER_1 0x000c 944 945#define IWL_CSI_CHUNK_CTL_NUM_MASK_VER_2 0x00ff 946#define IWL_CSI_CHUNK_CTL_IDX_MASK_VER_2 0xff00 947 948struct iwl_csi_chunk_notification { 949 __le32 token; 950 __le16 seq; 951 __le16 ctl; 952 __le32 size; 953 u8 data[]; 954} __packed; /* CSI_CHUNKS_HDR_NTFY_API_S_VER_1/VER_2 */ 955 956#endif /* __iwl_fw_api_location_h__ */ 957