linux/drivers/net/wireless/marvell/libertas/host.h
<<
>>
Prefs
   1/* SPDX-License-Identifier: GPL-2.0 */
   2/*
   3 * This file function prototypes, data structure
   4 * and  definitions for all the host/station commands
   5 */
   6
   7#ifndef _LBS_HOST_H_
   8#define _LBS_HOST_H_
   9
  10#include "types.h"
  11#include "defs.h"
  12
  13#define DEFAULT_AD_HOC_CHANNEL                  6
  14
  15#define CMD_OPTION_WAITFORRSP                   0x0002
  16
  17/* Host command IDs */
  18
  19/*
  20 * Return command are almost always the same as the host command, but with
  21 * bit 15 set high.  There are a few exceptions, though...
  22 */
  23#define CMD_RET(cmd)                            (0x8000 | cmd)
  24
  25/* Return command convention exceptions: */
  26#define CMD_RET_802_11_ASSOCIATE                0x8012
  27
  28/* Command codes */
  29#define CMD_GET_HW_SPEC                         0x0003
  30#define CMD_EEPROM_UPDATE                       0x0004
  31#define CMD_802_11_RESET                        0x0005
  32#define CMD_802_11_SCAN                         0x0006
  33#define CMD_802_11_GET_LOG                      0x000b
  34#define CMD_MAC_MULTICAST_ADR                   0x0010
  35#define CMD_802_11_AUTHENTICATE                 0x0011
  36#define CMD_802_11_EEPROM_ACCESS                0x0059
  37#define CMD_802_11_ASSOCIATE                    0x0050
  38#define CMD_802_11_SET_WEP                      0x0013
  39#define CMD_802_11_GET_STAT                     0x0014
  40#define CMD_802_3_GET_STAT                      0x0015
  41#define CMD_802_11_SNMP_MIB                     0x0016
  42#define CMD_MAC_REG_MAP                         0x0017
  43#define CMD_BBP_REG_MAP                         0x0018
  44#define CMD_MAC_REG_ACCESS                      0x0019
  45#define CMD_BBP_REG_ACCESS                      0x001a
  46#define CMD_RF_REG_ACCESS                       0x001b
  47#define CMD_802_11_RADIO_CONTROL                0x001c
  48#define CMD_802_11_RF_CHANNEL                   0x001d
  49#define CMD_802_11_RF_TX_POWER                  0x001e
  50#define CMD_802_11_RSSI                         0x001f
  51#define CMD_802_11_RF_ANTENNA                   0x0020
  52#define CMD_802_11_PS_MODE                      0x0021
  53#define CMD_802_11_DATA_RATE                    0x0022
  54#define CMD_RF_REG_MAP                          0x0023
  55#define CMD_802_11_DEAUTHENTICATE               0x0024
  56#define CMD_802_11_REASSOCIATE                  0x0025
  57#define CMD_MAC_CONTROL                         0x0028
  58#define CMD_802_11_AD_HOC_START                 0x002b
  59#define CMD_802_11_AD_HOC_JOIN                  0x002c
  60#define CMD_802_11_QUERY_TKIP_REPLY_CNTRS       0x002e
  61#define CMD_802_11_ENABLE_RSN                   0x002f
  62#define CMD_802_11_SET_AFC                      0x003c
  63#define CMD_802_11_GET_AFC                      0x003d
  64#define CMD_802_11_DEEP_SLEEP                   0x003e
  65#define CMD_802_11_AD_HOC_STOP                  0x0040
  66#define CMD_802_11_HOST_SLEEP_CFG               0x0043
  67#define CMD_802_11_WAKEUP_CONFIRM               0x0044
  68#define CMD_802_11_HOST_SLEEP_ACTIVATE          0x0045
  69#define CMD_802_11_BEACON_STOP                  0x0049
  70#define CMD_802_11_MAC_ADDRESS                  0x004d
  71#define CMD_802_11_LED_GPIO_CTRL                0x004e
  72#define CMD_802_11_BAND_CONFIG                  0x0058
  73#define CMD_GSPI_BUS_CONFIG                     0x005a
  74#define CMD_802_11D_DOMAIN_INFO                 0x005b
  75#define CMD_802_11_KEY_MATERIAL                 0x005e
  76#define CMD_802_11_SLEEP_PARAMS                 0x0066
  77#define CMD_802_11_INACTIVITY_TIMEOUT           0x0067
  78#define CMD_802_11_SLEEP_PERIOD                 0x0068
  79#define CMD_802_11_TPC_CFG                      0x0072
  80#define CMD_802_11_PA_CFG                       0x0073
  81#define CMD_802_11_FW_WAKE_METHOD               0x0074
  82#define CMD_802_11_SUBSCRIBE_EVENT              0x0075
  83#define CMD_802_11_RATE_ADAPT_RATESET           0x0076
  84#define CMD_802_11_TX_RATE_QUERY                0x007f
  85#define CMD_GET_TSF                             0x0080
  86#define CMD_BT_ACCESS                           0x0087
  87#define CMD_FWT_ACCESS                          0x0095
  88#define CMD_802_11_MONITOR_MODE                 0x0098
  89#define CMD_MESH_ACCESS                         0x009b
  90#define CMD_MESH_CONFIG_OLD                     0x00a3
  91#define CMD_MESH_CONFIG                         0x00ac
  92#define CMD_SET_BOOT2_VER                       0x00a5
  93#define CMD_FUNC_INIT                           0x00a9
  94#define CMD_FUNC_SHUTDOWN                       0x00aa
  95#define CMD_802_11_BEACON_CTRL                  0x00b0
  96
  97/* For the IEEE Power Save */
  98#define PS_MODE_ACTION_ENTER_PS                 0x0030
  99#define PS_MODE_ACTION_EXIT_PS                  0x0031
 100#define PS_MODE_ACTION_SLEEP_CONFIRMED          0x0034
 101
 102#define CMD_ENABLE_RSN                          0x0001
 103#define CMD_DISABLE_RSN                         0x0000
 104
 105#define CMD_ACT_GET                             0x0000
 106#define CMD_ACT_SET                             0x0001
 107
 108/* Define action or option for CMD_802_11_SET_WEP */
 109#define CMD_ACT_ADD                             0x0002
 110#define CMD_ACT_REMOVE                          0x0004
 111
 112#define CMD_TYPE_WEP_40_BIT                     0x01
 113#define CMD_TYPE_WEP_104_BIT                    0x02
 114
 115#define CMD_NUM_OF_WEP_KEYS                     4
 116
 117#define CMD_WEP_KEY_INDEX_MASK                  0x3fff
 118
 119/* Define action or option for CMD_802_11_SCAN */
 120#define CMD_BSS_TYPE_BSS                        0x0001
 121#define CMD_BSS_TYPE_IBSS                       0x0002
 122#define CMD_BSS_TYPE_ANY                        0x0003
 123
 124/* Define action or option for CMD_802_11_SCAN */
 125#define CMD_SCAN_TYPE_ACTIVE                    0x0000
 126#define CMD_SCAN_TYPE_PASSIVE                   0x0001
 127
 128#define CMD_SCAN_RADIO_TYPE_BG                  0
 129
 130#define CMD_SCAN_PROBE_DELAY_TIME               0
 131
 132/* Define action or option for CMD_MAC_CONTROL */
 133#define CMD_ACT_MAC_RX_ON                       0x0001
 134#define CMD_ACT_MAC_TX_ON                       0x0002
 135#define CMD_ACT_MAC_LOOPBACK_ON                 0x0004
 136#define CMD_ACT_MAC_WEP_ENABLE                  0x0008
 137#define CMD_ACT_MAC_INT_ENABLE                  0x0010
 138#define CMD_ACT_MAC_MULTICAST_ENABLE            0x0020
 139#define CMD_ACT_MAC_BROADCAST_ENABLE            0x0040
 140#define CMD_ACT_MAC_PROMISCUOUS_ENABLE          0x0080
 141#define CMD_ACT_MAC_ALL_MULTICAST_ENABLE        0x0100
 142#define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE    0x0400
 143
 144/* Event flags for CMD_802_11_SUBSCRIBE_EVENT */
 145#define CMD_SUBSCRIBE_RSSI_LOW                  0x0001
 146#define CMD_SUBSCRIBE_SNR_LOW                   0x0002
 147#define CMD_SUBSCRIBE_FAILCOUNT                 0x0004
 148#define CMD_SUBSCRIBE_BCNMISS                   0x0008
 149#define CMD_SUBSCRIBE_RSSI_HIGH                 0x0010
 150#define CMD_SUBSCRIBE_SNR_HIGH                  0x0020
 151
 152#define RADIO_PREAMBLE_LONG                     0x00
 153#define RADIO_PREAMBLE_SHORT                    0x02
 154#define RADIO_PREAMBLE_AUTO                     0x04
 155
 156/* Define action or option for CMD_802_11_RF_CHANNEL */
 157#define CMD_OPT_802_11_RF_CHANNEL_GET           0x00
 158#define CMD_OPT_802_11_RF_CHANNEL_SET           0x01
 159
 160/* Define action or option for CMD_802_11_DATA_RATE */
 161#define CMD_ACT_SET_TX_AUTO                     0x0000
 162#define CMD_ACT_SET_TX_FIX_RATE                 0x0001
 163#define CMD_ACT_GET_TX_RATE                     0x0002
 164
 165/* Options for CMD_802_11_FW_WAKE_METHOD */
 166#define CMD_WAKE_METHOD_UNCHANGED               0x0000
 167#define CMD_WAKE_METHOD_COMMAND_INT             0x0001
 168#define CMD_WAKE_METHOD_GPIO                    0x0002
 169
 170/* Object IDs for CMD_802_11_SNMP_MIB */
 171#define SNMP_MIB_OID_BSS_TYPE                   0x0000
 172#define SNMP_MIB_OID_OP_RATE_SET                0x0001
 173#define SNMP_MIB_OID_BEACON_PERIOD              0x0002  /* Reserved on v9+ */
 174#define SNMP_MIB_OID_DTIM_PERIOD                0x0003  /* Reserved on v9+ */
 175#define SNMP_MIB_OID_ASSOC_TIMEOUT              0x0004  /* Reserved on v9+ */
 176#define SNMP_MIB_OID_RTS_THRESHOLD              0x0005
 177#define SNMP_MIB_OID_SHORT_RETRY_LIMIT          0x0006
 178#define SNMP_MIB_OID_LONG_RETRY_LIMIT           0x0007
 179#define SNMP_MIB_OID_FRAG_THRESHOLD             0x0008
 180#define SNMP_MIB_OID_11D_ENABLE                 0x0009
 181#define SNMP_MIB_OID_11H_ENABLE                 0x000A
 182
 183/* Define action or option for CMD_BT_ACCESS */
 184enum cmd_bt_access_opts {
 185        /* The bt commands start at 5 instead of 1 because the old dft commands
 186         * are mapped to 1-4.  These old commands are no longer maintained and
 187         * should not be called.
 188         */
 189        CMD_ACT_BT_ACCESS_ADD = 5,
 190        CMD_ACT_BT_ACCESS_DEL,
 191        CMD_ACT_BT_ACCESS_LIST,
 192        CMD_ACT_BT_ACCESS_RESET,
 193        CMD_ACT_BT_ACCESS_SET_INVERT,
 194        CMD_ACT_BT_ACCESS_GET_INVERT
 195};
 196
 197/* Define action or option for CMD_FWT_ACCESS */
 198enum cmd_fwt_access_opts {
 199        CMD_ACT_FWT_ACCESS_ADD = 1,
 200        CMD_ACT_FWT_ACCESS_DEL,
 201        CMD_ACT_FWT_ACCESS_LOOKUP,
 202        CMD_ACT_FWT_ACCESS_LIST,
 203        CMD_ACT_FWT_ACCESS_LIST_ROUTE,
 204        CMD_ACT_FWT_ACCESS_LIST_NEIGHBOR,
 205        CMD_ACT_FWT_ACCESS_RESET,
 206        CMD_ACT_FWT_ACCESS_CLEANUP,
 207        CMD_ACT_FWT_ACCESS_TIME,
 208};
 209
 210/* Define action or option for CMD_802_11_HOST_SLEEP_CFG */
 211enum cmd_wol_cfg_opts {
 212        CMD_ACT_ACTION_NONE = 0,
 213        CMD_ACT_SET_WOL_RULE,
 214        CMD_ACT_GET_WOL_RULE,
 215        CMD_ACT_RESET_WOL_RULE,
 216};
 217
 218/* Define action or option for CMD_MESH_ACCESS */
 219enum cmd_mesh_access_opts {
 220        CMD_ACT_MESH_GET_TTL = 1,
 221        CMD_ACT_MESH_SET_TTL,
 222        CMD_ACT_MESH_GET_STATS,
 223        CMD_ACT_MESH_GET_ANYCAST,
 224        CMD_ACT_MESH_SET_ANYCAST,
 225        CMD_ACT_MESH_SET_LINK_COSTS,
 226        CMD_ACT_MESH_GET_LINK_COSTS,
 227        CMD_ACT_MESH_SET_BCAST_RATE,
 228        CMD_ACT_MESH_GET_BCAST_RATE,
 229        CMD_ACT_MESH_SET_RREQ_DELAY,
 230        CMD_ACT_MESH_GET_RREQ_DELAY,
 231        CMD_ACT_MESH_SET_ROUTE_EXP,
 232        CMD_ACT_MESH_GET_ROUTE_EXP,
 233        CMD_ACT_MESH_SET_AUTOSTART_ENABLED,
 234        CMD_ACT_MESH_GET_AUTOSTART_ENABLED,
 235        CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT = 17,
 236};
 237
 238/* Define actions and types for CMD_MESH_CONFIG */
 239enum cmd_mesh_config_actions {
 240        CMD_ACT_MESH_CONFIG_STOP = 0,
 241        CMD_ACT_MESH_CONFIG_START,
 242        CMD_ACT_MESH_CONFIG_SET,
 243        CMD_ACT_MESH_CONFIG_GET,
 244};
 245
 246enum cmd_mesh_config_types {
 247        CMD_TYPE_MESH_SET_BOOTFLAG = 1,
 248        CMD_TYPE_MESH_SET_BOOTTIME,
 249        CMD_TYPE_MESH_SET_DEF_CHANNEL,
 250        CMD_TYPE_MESH_SET_MESH_IE,
 251        CMD_TYPE_MESH_GET_DEFAULTS,
 252        CMD_TYPE_MESH_GET_MESH_IE, /* GET_DEFAULTS is superset of GET_MESHIE */
 253};
 254
 255/* Card Event definition */
 256#define MACREG_INT_CODE_TX_PPA_FREE             0
 257#define MACREG_INT_CODE_TX_DMA_DONE             1
 258#define MACREG_INT_CODE_LINK_LOST_W_SCAN        2
 259#define MACREG_INT_CODE_LINK_LOST_NO_SCAN       3
 260#define MACREG_INT_CODE_LINK_SENSED             4
 261#define MACREG_INT_CODE_CMD_FINISHED            5
 262#define MACREG_INT_CODE_MIB_CHANGED             6
 263#define MACREG_INT_CODE_INIT_DONE               7
 264#define MACREG_INT_CODE_DEAUTHENTICATED         8
 265#define MACREG_INT_CODE_DISASSOCIATED           9
 266#define MACREG_INT_CODE_PS_AWAKE                10
 267#define MACREG_INT_CODE_PS_SLEEP                11
 268#define MACREG_INT_CODE_MIC_ERR_MULTICAST       13
 269#define MACREG_INT_CODE_MIC_ERR_UNICAST         14
 270#define MACREG_INT_CODE_WM_AWAKE                15
 271#define MACREG_INT_CODE_DEEP_SLEEP_AWAKE        16
 272#define MACREG_INT_CODE_ADHOC_BCN_LOST          17
 273#define MACREG_INT_CODE_HOST_AWAKE              18
 274#define MACREG_INT_CODE_STOP_TX                 19
 275#define MACREG_INT_CODE_START_TX                20
 276#define MACREG_INT_CODE_CHANNEL_SWITCH          21
 277#define MACREG_INT_CODE_MEASUREMENT_RDY         22
 278#define MACREG_INT_CODE_WMM_CHANGE              23
 279#define MACREG_INT_CODE_BG_SCAN_REPORT          24
 280#define MACREG_INT_CODE_RSSI_LOW                25
 281#define MACREG_INT_CODE_SNR_LOW                 26
 282#define MACREG_INT_CODE_MAX_FAIL                27
 283#define MACREG_INT_CODE_RSSI_HIGH               28
 284#define MACREG_INT_CODE_SNR_HIGH                29
 285#define MACREG_INT_CODE_MESH_AUTO_STARTED       35
 286#define MACREG_INT_CODE_FIRMWARE_READY          48
 287
 288
 289/* 802.11-related definitions */
 290
 291/* TxPD descriptor */
 292struct txpd {
 293        /* union to cope up with later FW revisions */
 294        union {
 295                /* Current Tx packet status */
 296                __le32 tx_status;
 297                struct {
 298                        /* BSS type: client, AP, etc. */
 299                        u8 bss_type;
 300                        /* BSS number */
 301                        u8 bss_num;
 302                        /* Reserved */
 303                        __le16 reserved;
 304                } bss;
 305        } u;
 306        /* Tx control */
 307        __le32 tx_control;
 308        __le32 tx_packet_location;
 309        /* Tx packet length */
 310        __le16 tx_packet_length;
 311        /* First 2 byte of destination MAC address */
 312        u8 tx_dest_addr_high[2];
 313        /* Last 4 byte of destination MAC address */
 314        u8 tx_dest_addr_low[4];
 315        /* Pkt Priority */
 316        u8 priority;
 317        /* Pkt Trasnit Power control */
 318        u8 powermgmt;
 319        /* Amount of time the packet has been queued (units = 2ms) */
 320        u8 pktdelay_2ms;
 321        /* reserved */
 322        u8 reserved1;
 323} __packed;
 324
 325/* RxPD Descriptor */
 326struct rxpd {
 327        /* union to cope up with later FW revisions */
 328        union {
 329                /* Current Rx packet status */
 330                __le16 status;
 331                struct {
 332                        /* BSS type: client, AP, etc. */
 333                        u8 bss_type;
 334                        /* BSS number */
 335                        u8 bss_num;
 336                } __packed bss;
 337        } __packed u;
 338
 339        /* SNR */
 340        u8 snr;
 341
 342        /* Tx control */
 343        u8 rx_control;
 344
 345        /* Pkt length */
 346        __le16 pkt_len;
 347
 348        /* Noise Floor */
 349        u8 nf;
 350
 351        /* Rx Packet Rate */
 352        u8 rx_rate;
 353
 354        /* Pkt addr */
 355        __le32 pkt_ptr;
 356
 357        /* Next Rx RxPD addr */
 358        __le32 next_rxpd_ptr;
 359
 360        /* Pkt Priority */
 361        u8 priority;
 362        u8 reserved[3];
 363} __packed;
 364
 365struct cmd_header {
 366        __le16 command;
 367        __le16 size;
 368        __le16 seqnum;
 369        __le16 result;
 370} __packed;
 371
 372/* Generic structure to hold all key types. */
 373struct enc_key {
 374        u16 len;
 375        u16 flags;  /* KEY_INFO_* from defs.h */
 376        u16 type; /* KEY_TYPE_* from defs.h */
 377        u8 key[32];
 378};
 379
 380/* lbs_offset_value */
 381struct lbs_offset_value {
 382        u32 offset;
 383        u32 value;
 384} __packed;
 385
 386#define MAX_11D_TRIPLETS        83
 387
 388struct mrvl_ie_domain_param_set {
 389        struct mrvl_ie_header header;
 390
 391        u8 country_code[IEEE80211_COUNTRY_STRING_LEN];
 392        struct ieee80211_country_ie_triplet triplet[MAX_11D_TRIPLETS];
 393} __packed;
 394
 395struct cmd_ds_802_11d_domain_info {
 396        struct cmd_header hdr;
 397
 398        __le16 action;
 399        struct mrvl_ie_domain_param_set domain;
 400} __packed;
 401
 402/*
 403 * Define data structure for CMD_GET_HW_SPEC
 404 * This structure defines the response for the GET_HW_SPEC command
 405 */
 406struct cmd_ds_get_hw_spec {
 407        struct cmd_header hdr;
 408
 409        /* HW Interface version number */
 410        __le16 hwifversion;
 411        /* HW version number */
 412        __le16 version;
 413        /* Max number of TxPD FW can handle */
 414        __le16 nr_txpd;
 415        /* Max no of Multicast address */
 416        __le16 nr_mcast_adr;
 417        /* MAC address */
 418        u8 permanentaddr[6];
 419
 420        /* region Code */
 421        __le16 regioncode;
 422
 423        /* Number of antenna used */
 424        __le16 nr_antenna;
 425
 426        /* FW release number, example 0x01030304 = 2.3.4p1 */
 427        __le32 fwrelease;
 428
 429        /* Base Address of TxPD queue */
 430        __le32 wcb_base;
 431        /* Read Pointer of RxPd queue */
 432        __le32 rxpd_rdptr;
 433
 434        /* Write Pointer of RxPd queue */
 435        __le32 rxpd_wrptr;
 436
 437        /*FW/HW capability */
 438        __le32 fwcapinfo;
 439} __packed;
 440
 441struct cmd_ds_802_11_subscribe_event {
 442        struct cmd_header hdr;
 443
 444        __le16 action;
 445        __le16 events;
 446
 447        /* A TLV to the CMD_802_11_SUBSCRIBE_EVENT command can contain a
 448         * number of TLVs. From the v5.1 manual, those TLVs would add up to
 449         * 40 bytes. However, future firmware might add additional TLVs, so I
 450         * bump this up a bit.
 451         */
 452        uint8_t tlv[128];
 453} __packed;
 454
 455/*
 456 * This scan handle Country Information IE(802.11d compliant)
 457 * Define data structure for CMD_802_11_SCAN
 458 */
 459struct cmd_ds_802_11_scan {
 460        struct cmd_header hdr;
 461
 462        uint8_t bsstype;
 463        uint8_t bssid[ETH_ALEN];
 464        uint8_t tlvbuffer[0];
 465} __packed;
 466
 467struct cmd_ds_802_11_scan_rsp {
 468        struct cmd_header hdr;
 469
 470        __le16 bssdescriptsize;
 471        uint8_t nr_sets;
 472        uint8_t bssdesc_and_tlvbuffer[0];
 473} __packed;
 474
 475struct cmd_ds_802_11_get_log {
 476        struct cmd_header hdr;
 477
 478        __le32 mcasttxframe;
 479        __le32 failed;
 480        __le32 retry;
 481        __le32 multiretry;
 482        __le32 framedup;
 483        __le32 rtssuccess;
 484        __le32 rtsfailure;
 485        __le32 ackfailure;
 486        __le32 rxfrag;
 487        __le32 mcastrxframe;
 488        __le32 fcserror;
 489        __le32 txframe;
 490        __le32 wepundecryptable;
 491} __packed;
 492
 493struct cmd_ds_mac_control {
 494        struct cmd_header hdr;
 495        __le16 action;
 496        u16 reserved;
 497} __packed;
 498
 499struct cmd_ds_mac_multicast_adr {
 500        struct cmd_header hdr;
 501        __le16 action;
 502        __le16 nr_of_adrs;
 503        u8 maclist[ETH_ALEN * MRVDRV_MAX_MULTICAST_LIST_SIZE];
 504} __packed;
 505
 506struct cmd_ds_802_11_authenticate {
 507        struct cmd_header hdr;
 508
 509        u8 bssid[ETH_ALEN];
 510        u8 authtype;
 511        u8 reserved[10];
 512} __packed;
 513
 514struct cmd_ds_802_11_deauthenticate {
 515        struct cmd_header hdr;
 516
 517        u8 macaddr[ETH_ALEN];
 518        __le16 reasoncode;
 519} __packed;
 520
 521struct cmd_ds_802_11_associate {
 522        struct cmd_header hdr;
 523
 524        u8 bssid[6];
 525        __le16 capability;
 526        __le16 listeninterval;
 527        __le16 bcnperiod;
 528        u8 dtimperiod;
 529        u8 iebuf[512];    /* Enough for required and most optional IEs */
 530} __packed;
 531
 532struct cmd_ds_802_11_associate_response {
 533        struct cmd_header hdr;
 534
 535        __le16 capability;
 536        __le16 statuscode;
 537        __le16 aid;
 538        u8 iebuf[512];
 539} __packed;
 540
 541struct cmd_ds_802_11_set_wep {
 542        struct cmd_header hdr;
 543
 544        /* ACT_ADD, ACT_REMOVE or ACT_ENABLE */
 545        __le16 action;
 546
 547        /* key Index selected for Tx */
 548        __le16 keyindex;
 549
 550        /* 40, 128bit or TXWEP */
 551        uint8_t keytype[4];
 552        uint8_t keymaterial[4][16];
 553} __packed;
 554
 555struct cmd_ds_802_11_snmp_mib {
 556        struct cmd_header hdr;
 557
 558        __le16 action;
 559        __le16 oid;
 560        __le16 bufsize;
 561        u8 value[128];
 562} __packed;
 563
 564struct cmd_ds_reg_access {
 565        struct cmd_header hdr;
 566
 567        __le16 action;
 568        __le16 offset;
 569        union {
 570                u8 bbp_rf;  /* for BBP and RF registers */
 571                __le32 mac; /* for MAC registers */
 572        } value;
 573} __packed;
 574
 575struct cmd_ds_802_11_radio_control {
 576        struct cmd_header hdr;
 577
 578        __le16 action;
 579        __le16 control;
 580} __packed;
 581
 582struct cmd_ds_802_11_beacon_control {
 583        struct cmd_header hdr;
 584
 585        __le16 action;
 586        __le16 beacon_enable;
 587        __le16 beacon_period;
 588} __packed;
 589
 590struct cmd_ds_802_11_sleep_params {
 591        struct cmd_header hdr;
 592
 593        /* ACT_GET/ACT_SET */
 594        __le16 action;
 595
 596        /* Sleep clock error in ppm */
 597        __le16 error;
 598
 599        /* Wakeup offset in usec */
 600        __le16 offset;
 601
 602        /* Clock stabilization time in usec */
 603        __le16 stabletime;
 604
 605        /* control periodic calibration */
 606        uint8_t calcontrol;
 607
 608        /* control the use of external sleep clock */
 609        uint8_t externalsleepclk;
 610
 611        /* reserved field, should be set to zero */
 612        __le16 reserved;
 613} __packed;
 614
 615struct cmd_ds_802_11_rf_channel {
 616        struct cmd_header hdr;
 617
 618        __le16 action;
 619        __le16 channel;
 620        __le16 rftype;      /* unused */
 621        __le16 reserved;    /* unused */
 622        u8 channellist[32]; /* unused */
 623} __packed;
 624
 625struct cmd_ds_802_11_rssi {
 626        struct cmd_header hdr;
 627
 628        /*
 629         * request:  number of beacons (N) to average the SNR and NF over
 630         * response: SNR of most recent beacon
 631         */
 632        __le16 n_or_snr;
 633
 634        /*
 635         * The following fields are only set in the response.
 636         * In the request these are reserved and should be set to 0.
 637         */
 638        __le16 nf;       /* most recent beacon noise floor */
 639        __le16 avg_snr;  /* average SNR weighted by N from request */
 640        __le16 avg_nf;   /* average noise floor weighted by N from request */
 641} __packed;
 642
 643struct cmd_ds_802_11_mac_address {
 644        struct cmd_header hdr;
 645
 646        __le16 action;
 647        u8 macadd[ETH_ALEN];
 648} __packed;
 649
 650struct cmd_ds_802_11_rf_tx_power {
 651        struct cmd_header hdr;
 652
 653        __le16 action;
 654        __le16 curlevel;
 655        s8 maxlevel;
 656        s8 minlevel;
 657} __packed;
 658
 659/* MONITOR_MODE only exists in OLPC v5 firmware */
 660struct cmd_ds_802_11_monitor_mode {
 661        struct cmd_header hdr;
 662
 663        __le16 action;
 664        __le16 mode;
 665} __packed;
 666
 667struct cmd_ds_set_boot2_ver {
 668        struct cmd_header hdr;
 669
 670        __le16 action;
 671        __le16 version;
 672} __packed;
 673
 674struct cmd_ds_802_11_fw_wake_method {
 675        struct cmd_header hdr;
 676
 677        __le16 action;
 678        __le16 method;
 679} __packed;
 680
 681struct cmd_ds_802_11_ps_mode {
 682        struct cmd_header hdr;
 683
 684        __le16 action;
 685
 686        /*
 687         * Interval for keepalive in PS mode:
 688         * 0x0000 = don't change
 689         * 0x001E = firmware default
 690         * 0xFFFF = disable
 691         */
 692        __le16 nullpktinterval;
 693
 694        /*
 695         * Number of DTIM intervals to wake up for:
 696         * 0 = don't change
 697         * 1 = firmware default
 698         * 5 = max
 699         */
 700        __le16 multipledtim;
 701
 702        __le16 reserved;
 703        __le16 locallisteninterval;
 704
 705        /*
 706         * AdHoc awake period (FW v9+ only):
 707         * 0 = don't change
 708         * 1 = always awake (IEEE standard behavior)
 709         * 2 - 31 = sleep for (n - 1) periods and awake for 1 period
 710         * 32 - 254 = invalid
 711         * 255 = sleep at each ATIM
 712         */
 713        __le16 adhoc_awake_period;
 714} __packed;
 715
 716struct cmd_confirm_sleep {
 717        struct cmd_header hdr;
 718
 719        __le16 action;
 720        __le16 nullpktinterval;
 721        __le16 multipledtim;
 722        __le16 reserved;
 723        __le16 locallisteninterval;
 724} __packed;
 725
 726struct cmd_ds_802_11_data_rate {
 727        struct cmd_header hdr;
 728
 729        __le16 action;
 730        __le16 reserved;
 731        u8 rates[MAX_RATES];
 732} __packed;
 733
 734struct cmd_ds_802_11_rate_adapt_rateset {
 735        struct cmd_header hdr;
 736        __le16 action;
 737        __le16 enablehwauto;
 738        __le16 bitmap;
 739} __packed;
 740
 741struct cmd_ds_802_11_ad_hoc_start {
 742        struct cmd_header hdr;
 743
 744        u8 ssid[IEEE80211_MAX_SSID_LEN];
 745        u8 bsstype;
 746        __le16 beaconperiod;
 747        u8 dtimperiod;   /* Reserved on v9 and later */
 748        struct ieee_ie_ibss_param_set ibss;
 749        u8 reserved1[4];
 750        struct ieee_ie_ds_param_set ds;
 751        u8 reserved2[4];
 752        __le16 probedelay;  /* Reserved on v9 and later */
 753        __le16 capability;
 754        u8 rates[MAX_RATES];
 755        u8 tlv_memory_size_pad[100];
 756} __packed;
 757
 758struct cmd_ds_802_11_ad_hoc_result {
 759        struct cmd_header hdr;
 760
 761        u8 pad[3];
 762        u8 bssid[ETH_ALEN];
 763} __packed;
 764
 765struct adhoc_bssdesc {
 766        u8 bssid[ETH_ALEN];
 767        u8 ssid[IEEE80211_MAX_SSID_LEN];
 768        u8 type;
 769        __le16 beaconperiod;
 770        u8 dtimperiod;
 771        __le64 timestamp;
 772        __le64 localtime;
 773        struct ieee_ie_ds_param_set ds;
 774        u8 reserved1[4];
 775        struct ieee_ie_ibss_param_set ibss;
 776        u8 reserved2[4];
 777        __le16 capability;
 778        u8 rates[MAX_RATES];
 779
 780        /*
 781         * DO NOT ADD ANY FIELDS TO THIS STRUCTURE. It is used below in the
 782         * Adhoc join command and will cause a binary layout mismatch with
 783         * the firmware
 784         */
 785} __packed;
 786
 787struct cmd_ds_802_11_ad_hoc_join {
 788        struct cmd_header hdr;
 789
 790        struct adhoc_bssdesc bss;
 791        __le16 failtimeout;   /* Reserved on v9 and later */
 792        __le16 probedelay;    /* Reserved on v9 and later */
 793} __packed;
 794
 795struct cmd_ds_802_11_ad_hoc_stop {
 796        struct cmd_header hdr;
 797} __packed;
 798
 799struct cmd_ds_802_11_enable_rsn {
 800        struct cmd_header hdr;
 801
 802        __le16 action;
 803        __le16 enable;
 804} __packed;
 805
 806struct MrvlIEtype_keyParamSet {
 807        /* type ID */
 808        __le16 type;
 809
 810        /* length of Payload */
 811        __le16 length;
 812
 813        /* type of key: WEP=0, TKIP=1, AES=2 */
 814        __le16 keytypeid;
 815
 816        /* key control Info specific to a keytypeid */
 817        __le16 keyinfo;
 818
 819        /* length of key */
 820        __le16 keylen;
 821
 822        /* key material of size keylen */
 823        u8 key[32];
 824} __packed;
 825
 826#define MAX_WOL_RULES           16
 827
 828struct host_wol_rule {
 829        uint8_t rule_no;
 830        uint8_t rule_ops;
 831        __le16 sig_offset;
 832        __le16 sig_length;
 833        __le16 reserve;
 834        __be32 sig_mask;
 835        __be32 signature;
 836} __packed;
 837
 838struct wol_config {
 839        uint8_t action;
 840        uint8_t pattern;
 841        uint8_t no_rules_in_cmd;
 842        uint8_t result;
 843        struct host_wol_rule rule[MAX_WOL_RULES];
 844} __packed;
 845
 846struct cmd_ds_host_sleep {
 847        struct cmd_header hdr;
 848        __le32 criteria;
 849        uint8_t gpio;
 850        uint16_t gap;
 851        struct wol_config wol_conf;
 852} __packed;
 853
 854
 855
 856struct cmd_ds_802_11_key_material {
 857        struct cmd_header hdr;
 858
 859        __le16 action;
 860        struct MrvlIEtype_keyParamSet keyParamSet[2];
 861} __packed;
 862
 863struct cmd_ds_802_11_eeprom_access {
 864        struct cmd_header hdr;
 865        __le16 action;
 866        __le16 offset;
 867        __le16 len;
 868        /* firmware says it returns a maximum of 20 bytes */
 869#define LBS_EEPROM_READ_LEN 20
 870        u8 value[LBS_EEPROM_READ_LEN];
 871} __packed;
 872
 873struct cmd_ds_802_11_tpc_cfg {
 874        struct cmd_header hdr;
 875
 876        __le16 action;
 877        uint8_t enable;
 878        int8_t P0;
 879        int8_t P1;
 880        int8_t P2;
 881        uint8_t usesnr;
 882} __packed;
 883
 884
 885struct cmd_ds_802_11_pa_cfg {
 886        struct cmd_header hdr;
 887
 888        __le16 action;
 889        uint8_t enable;
 890        int8_t P0;
 891        int8_t P1;
 892        int8_t P2;
 893} __packed;
 894
 895
 896struct cmd_ds_802_11_led_ctrl {
 897        struct cmd_header hdr;
 898
 899        __le16 action;
 900        __le16 numled;
 901        u8 data[256];
 902} __packed;
 903
 904/* Automatic Frequency Control */
 905struct cmd_ds_802_11_afc {
 906        struct cmd_header hdr;
 907
 908        __le16 afc_auto;
 909        union {
 910                struct {
 911                        __le16 threshold;
 912                        __le16 period;
 913                };
 914                struct {
 915                        __le16 timing_offset; /* signed */
 916                        __le16 carrier_offset; /* signed */
 917                };
 918        };
 919} __packed;
 920
 921struct cmd_tx_rate_query {
 922        __le16 txrate;
 923} __packed;
 924
 925struct cmd_ds_get_tsf {
 926        __le64 tsfvalue;
 927} __packed;
 928
 929struct cmd_ds_bt_access {
 930        struct cmd_header hdr;
 931
 932        __le16 action;
 933        __le32 id;
 934        u8 addr1[ETH_ALEN];
 935        u8 addr2[ETH_ALEN];
 936} __packed;
 937
 938struct cmd_ds_fwt_access {
 939        struct cmd_header hdr;
 940
 941        __le16 action;
 942        __le32 id;
 943        u8 valid;
 944        u8 da[ETH_ALEN];
 945        u8 dir;
 946        u8 ra[ETH_ALEN];
 947        __le32 ssn;
 948        __le32 dsn;
 949        __le32 metric;
 950        u8 rate;
 951        u8 hopcount;
 952        u8 ttl;
 953        __le32 expiration;
 954        u8 sleepmode;
 955        __le32 snr;
 956        __le32 references;
 957        u8 prec[ETH_ALEN];
 958} __packed;
 959
 960struct cmd_ds_mesh_config {
 961        struct cmd_header hdr;
 962
 963        __le16 action;
 964        __le16 channel;
 965        __le16 type;
 966        __le16 length;
 967        u8 data[128];   /* last position reserved */
 968} __packed;
 969
 970struct cmd_ds_mesh_access {
 971        struct cmd_header hdr;
 972
 973        __le16 action;
 974        __le32 data[32];        /* last position reserved */
 975} __packed;
 976
 977/* Number of stats counters returned by the firmware */
 978#define MESH_STATS_NUM 8
 979#endif
 980