linux/drivers/net/wireless/ti/wl1251/cmd.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0
   2#include "cmd.h"
   3
   4#include <linux/module.h>
   5#include <linux/slab.h>
   6#include <linux/etherdevice.h>
   7
   8#include "wl1251.h"
   9#include "reg.h"
  10#include "io.h"
  11#include "ps.h"
  12#include "acx.h"
  13
  14/**
  15 * send command to firmware
  16 *
  17 * @wl: wl struct
  18 * @id: command id
  19 * @buf: buffer containing the command, must work with dma
  20 * @len: length of the buffer
  21 */
  22int wl1251_cmd_send(struct wl1251 *wl, u16 id, void *buf, size_t len)
  23{
  24        struct wl1251_cmd_header *cmd;
  25        unsigned long timeout;
  26        u32 intr;
  27        int ret = 0;
  28
  29        cmd = buf;
  30        cmd->id = id;
  31        cmd->status = 0;
  32
  33        WARN_ON(len % 4 != 0);
  34
  35        wl1251_mem_write(wl, wl->cmd_box_addr, buf, len);
  36
  37        wl1251_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD);
  38
  39        timeout = jiffies + msecs_to_jiffies(WL1251_COMMAND_TIMEOUT);
  40
  41        intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
  42        while (!(intr & WL1251_ACX_INTR_CMD_COMPLETE)) {
  43                if (time_after(jiffies, timeout)) {
  44                        wl1251_error("command complete timeout");
  45                        ret = -ETIMEDOUT;
  46                        goto out;
  47                }
  48
  49                msleep(1);
  50
  51                intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
  52        }
  53
  54        wl1251_reg_write32(wl, ACX_REG_INTERRUPT_ACK,
  55                           WL1251_ACX_INTR_CMD_COMPLETE);
  56
  57out:
  58        return ret;
  59}
  60
  61/**
  62 * send test command to firmware
  63 *
  64 * @wl: wl struct
  65 * @buf: buffer containing the command, with all headers, must work with dma
  66 * @len: length of the buffer
  67 * @answer: is answer needed
  68 */
  69int wl1251_cmd_test(struct wl1251 *wl, void *buf, size_t buf_len, u8 answer)
  70{
  71        int ret;
  72
  73        wl1251_debug(DEBUG_CMD, "cmd test");
  74
  75        ret = wl1251_cmd_send(wl, CMD_TEST, buf, buf_len);
  76
  77        if (ret < 0) {
  78                wl1251_warning("TEST command failed");
  79                return ret;
  80        }
  81
  82        if (answer) {
  83                struct wl1251_command *cmd_answer;
  84
  85                /*
  86                 * The test command got in, we can read the answer.
  87                 * The answer would be a wl1251_command, where the
  88                 * parameter array contains the actual answer.
  89                 */
  90                wl1251_mem_read(wl, wl->cmd_box_addr, buf, buf_len);
  91
  92                cmd_answer = buf;
  93
  94                if (cmd_answer->header.status != CMD_STATUS_SUCCESS)
  95                        wl1251_error("TEST command answer error: %d",
  96                                     cmd_answer->header.status);
  97        }
  98
  99        return 0;
 100}
 101
 102/**
 103 * read acx from firmware
 104 *
 105 * @wl: wl struct
 106 * @id: acx id
 107 * @buf: buffer for the response, including all headers, must work with dma
 108 * @len: length of buf
 109 */
 110int wl1251_cmd_interrogate(struct wl1251 *wl, u16 id, void *buf, size_t len)
 111{
 112        struct acx_header *acx = buf;
 113        int ret;
 114
 115        wl1251_debug(DEBUG_CMD, "cmd interrogate");
 116
 117        acx->id = id;
 118
 119        /* payload length, does not include any headers */
 120        acx->len = len - sizeof(*acx);
 121
 122        ret = wl1251_cmd_send(wl, CMD_INTERROGATE, acx, sizeof(*acx));
 123        if (ret < 0) {
 124                wl1251_error("INTERROGATE command failed");
 125                goto out;
 126        }
 127
 128        /* the interrogate command got in, we can read the answer */
 129        wl1251_mem_read(wl, wl->cmd_box_addr, buf, len);
 130
 131        acx = buf;
 132        if (acx->cmd.status != CMD_STATUS_SUCCESS)
 133                wl1251_error("INTERROGATE command error: %d",
 134                             acx->cmd.status);
 135
 136out:
 137        return ret;
 138}
 139
 140/**
 141 * write acx value to firmware
 142 *
 143 * @wl: wl struct
 144 * @id: acx id
 145 * @buf: buffer containing acx, including all headers, must work with dma
 146 * @len: length of buf
 147 */
 148int wl1251_cmd_configure(struct wl1251 *wl, u16 id, void *buf, size_t len)
 149{
 150        struct acx_header *acx = buf;
 151        int ret;
 152
 153        wl1251_debug(DEBUG_CMD, "cmd configure");
 154
 155        acx->id = id;
 156
 157        /* payload length, does not include any headers */
 158        acx->len = len - sizeof(*acx);
 159
 160        ret = wl1251_cmd_send(wl, CMD_CONFIGURE, acx, len);
 161        if (ret < 0) {
 162                wl1251_warning("CONFIGURE command NOK");
 163                return ret;
 164        }
 165
 166        return 0;
 167}
 168
 169int wl1251_cmd_vbm(struct wl1251 *wl, u8 identity,
 170                   void *bitmap, u16 bitmap_len, u8 bitmap_control)
 171{
 172        struct wl1251_cmd_vbm_update *vbm;
 173        int ret;
 174
 175        wl1251_debug(DEBUG_CMD, "cmd vbm");
 176
 177        vbm = kzalloc(sizeof(*vbm), GFP_KERNEL);
 178        if (!vbm) {
 179                ret = -ENOMEM;
 180                goto out;
 181        }
 182
 183        /* Count and period will be filled by the target */
 184        vbm->tim.bitmap_ctrl = bitmap_control;
 185        if (bitmap_len > PARTIAL_VBM_MAX) {
 186                wl1251_warning("cmd vbm len is %d B, truncating to %d",
 187                               bitmap_len, PARTIAL_VBM_MAX);
 188                bitmap_len = PARTIAL_VBM_MAX;
 189        }
 190        memcpy(vbm->tim.pvb_field, bitmap, bitmap_len);
 191        vbm->tim.identity = identity;
 192        vbm->tim.length = bitmap_len + 3;
 193
 194        vbm->len = cpu_to_le16(bitmap_len + 5);
 195
 196        ret = wl1251_cmd_send(wl, CMD_VBM, vbm, sizeof(*vbm));
 197        if (ret < 0) {
 198                wl1251_error("VBM command failed");
 199                goto out;
 200        }
 201
 202out:
 203        kfree(vbm);
 204        return ret;
 205}
 206
 207int wl1251_cmd_data_path_rx(struct wl1251 *wl, u8 channel, bool enable)
 208{
 209        struct cmd_enabledisable_path *cmd;
 210        int ret;
 211        u16 cmd_rx;
 212
 213        wl1251_debug(DEBUG_CMD, "cmd data path");
 214
 215        cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
 216        if (!cmd) {
 217                ret = -ENOMEM;
 218                goto out;
 219        }
 220
 221        cmd->channel = channel;
 222
 223        if (enable)
 224                cmd_rx = CMD_ENABLE_RX;
 225        else
 226                cmd_rx = CMD_DISABLE_RX;
 227
 228        ret = wl1251_cmd_send(wl, cmd_rx, cmd, sizeof(*cmd));
 229        if (ret < 0) {
 230                wl1251_error("rx %s cmd for channel %d failed",
 231                             enable ? "start" : "stop", channel);
 232                goto out;
 233        }
 234
 235        wl1251_debug(DEBUG_BOOT, "rx %s cmd channel %d",
 236                     enable ? "start" : "stop", channel);
 237
 238out:
 239        kfree(cmd);
 240        return ret;
 241}
 242
 243int wl1251_cmd_data_path_tx(struct wl1251 *wl, u8 channel, bool enable)
 244{
 245        struct cmd_enabledisable_path *cmd;
 246        int ret;
 247        u16 cmd_tx;
 248
 249        wl1251_debug(DEBUG_CMD, "cmd data path");
 250
 251        cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
 252        if (!cmd)
 253                return -ENOMEM;
 254
 255        cmd->channel = channel;
 256
 257        if (enable)
 258                cmd_tx = CMD_ENABLE_TX;
 259        else
 260                cmd_tx = CMD_DISABLE_TX;
 261
 262        ret = wl1251_cmd_send(wl, cmd_tx, cmd, sizeof(*cmd));
 263        if (ret < 0)
 264                wl1251_error("tx %s cmd for channel %d failed",
 265                             enable ? "start" : "stop", channel);
 266        else
 267                wl1251_debug(DEBUG_BOOT, "tx %s cmd channel %d",
 268                             enable ? "start" : "stop", channel);
 269
 270        kfree(cmd);
 271        return ret;
 272}
 273
 274int wl1251_cmd_join(struct wl1251 *wl, u8 bss_type, u8 channel,
 275                    u16 beacon_interval, u8 dtim_interval)
 276{
 277        struct cmd_join *join;
 278        int ret, i;
 279        u8 *bssid;
 280
 281        join = kzalloc(sizeof(*join), GFP_KERNEL);
 282        if (!join) {
 283                ret = -ENOMEM;
 284                goto out;
 285        }
 286
 287        wl1251_debug(DEBUG_CMD, "cmd join%s ch %d %d/%d",
 288                     bss_type == BSS_TYPE_IBSS ? " ibss" : "",
 289                     channel, beacon_interval, dtim_interval);
 290
 291        /* Reverse order BSSID */
 292        bssid = (u8 *) &join->bssid_lsb;
 293        for (i = 0; i < ETH_ALEN; i++)
 294                bssid[i] = wl->bssid[ETH_ALEN - i - 1];
 295
 296        join->rx_config_options = wl->rx_config;
 297        join->rx_filter_options = wl->rx_filter;
 298
 299        join->basic_rate_set = RATE_MASK_1MBPS | RATE_MASK_2MBPS |
 300                RATE_MASK_5_5MBPS | RATE_MASK_11MBPS;
 301
 302        join->beacon_interval = beacon_interval;
 303        join->dtim_interval = dtim_interval;
 304        join->bss_type = bss_type;
 305        join->channel = channel;
 306        join->ctrl = JOIN_CMD_CTRL_TX_FLUSH;
 307
 308        ret = wl1251_cmd_send(wl, CMD_START_JOIN, join, sizeof(*join));
 309        if (ret < 0) {
 310                wl1251_error("failed to initiate cmd join");
 311                goto out;
 312        }
 313
 314out:
 315        kfree(join);
 316        return ret;
 317}
 318
 319int wl1251_cmd_ps_mode(struct wl1251 *wl, u8 ps_mode)
 320{
 321        struct wl1251_cmd_ps_params *ps_params = NULL;
 322        int ret = 0;
 323
 324        wl1251_debug(DEBUG_CMD, "cmd set ps mode");
 325
 326        ps_params = kzalloc(sizeof(*ps_params), GFP_KERNEL);
 327        if (!ps_params) {
 328                ret = -ENOMEM;
 329                goto out;
 330        }
 331
 332        ps_params->ps_mode = ps_mode;
 333        ps_params->send_null_data = 1;
 334        ps_params->retries = 5;
 335        ps_params->hang_over_period = 128;
 336        ps_params->null_data_rate = 1; /* 1 Mbps */
 337
 338        ret = wl1251_cmd_send(wl, CMD_SET_PS_MODE, ps_params,
 339                              sizeof(*ps_params));
 340        if (ret < 0) {
 341                wl1251_error("cmd set_ps_mode failed");
 342                goto out;
 343        }
 344
 345out:
 346        kfree(ps_params);
 347        return ret;
 348}
 349
 350int wl1251_cmd_read_memory(struct wl1251 *wl, u32 addr, void *answer,
 351                           size_t len)
 352{
 353        struct cmd_read_write_memory *cmd;
 354        int ret = 0;
 355
 356        wl1251_debug(DEBUG_CMD, "cmd read memory");
 357
 358        cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
 359        if (!cmd) {
 360                ret = -ENOMEM;
 361                goto out;
 362        }
 363
 364        WARN_ON(len > MAX_READ_SIZE);
 365        len = min_t(size_t, len, MAX_READ_SIZE);
 366
 367        cmd->addr = addr;
 368        cmd->size = len;
 369
 370        ret = wl1251_cmd_send(wl, CMD_READ_MEMORY, cmd, sizeof(*cmd));
 371        if (ret < 0) {
 372                wl1251_error("read memory command failed: %d", ret);
 373                goto out;
 374        }
 375
 376        /* the read command got in, we can now read the answer */
 377        wl1251_mem_read(wl, wl->cmd_box_addr, cmd, sizeof(*cmd));
 378
 379        if (cmd->header.status != CMD_STATUS_SUCCESS)
 380                wl1251_error("error in read command result: %d",
 381                             cmd->header.status);
 382
 383        memcpy(answer, cmd->value, len);
 384
 385out:
 386        kfree(cmd);
 387        return ret;
 388}
 389
 390int wl1251_cmd_template_set(struct wl1251 *wl, u16 cmd_id,
 391                            void *buf, size_t buf_len)
 392{
 393        struct wl1251_cmd_packet_template *cmd;
 394        size_t cmd_len;
 395        int ret = 0;
 396
 397        wl1251_debug(DEBUG_CMD, "cmd template %d", cmd_id);
 398
 399        WARN_ON(buf_len > WL1251_MAX_TEMPLATE_SIZE);
 400        buf_len = min_t(size_t, buf_len, WL1251_MAX_TEMPLATE_SIZE);
 401        cmd_len = ALIGN(sizeof(*cmd) + buf_len, 4);
 402
 403        cmd = kzalloc(cmd_len, GFP_KERNEL);
 404        if (!cmd) {
 405                ret = -ENOMEM;
 406                goto out;
 407        }
 408
 409        cmd->size = cpu_to_le16(buf_len);
 410
 411        if (buf)
 412                memcpy(cmd->data, buf, buf_len);
 413
 414        ret = wl1251_cmd_send(wl, cmd_id, cmd, cmd_len);
 415        if (ret < 0) {
 416                wl1251_warning("cmd set_template failed: %d", ret);
 417                goto out;
 418        }
 419
 420out:
 421        kfree(cmd);
 422        return ret;
 423}
 424
 425int wl1251_cmd_scan(struct wl1251 *wl, u8 *ssid, size_t ssid_len,
 426                    struct ieee80211_channel *channels[],
 427                    unsigned int n_channels, unsigned int n_probes)
 428{
 429        struct wl1251_cmd_scan *cmd;
 430        int i, ret = 0;
 431
 432        wl1251_debug(DEBUG_CMD, "cmd scan channels %d", n_channels);
 433
 434        WARN_ON(n_channels > SCAN_MAX_NUM_OF_CHANNELS);
 435
 436        cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
 437        if (!cmd)
 438                return -ENOMEM;
 439
 440        cmd->params.rx_config_options = cpu_to_le32(CFG_RX_ALL_GOOD);
 441        cmd->params.rx_filter_options = cpu_to_le32(CFG_RX_PRSP_EN |
 442                                                    CFG_RX_MGMT_EN |
 443                                                    CFG_RX_BCN_EN);
 444        cmd->params.scan_options = 0;
 445        /*
 446         * Use high priority scan when not associated to prevent fw issue
 447         * causing never-ending scans (sometimes 20+ minutes).
 448         * Note: This bug may be caused by the fw's DTIM handling.
 449         */
 450        if (is_zero_ether_addr(wl->bssid))
 451                cmd->params.scan_options |= cpu_to_le16(WL1251_SCAN_OPT_PRIORITY_HIGH);
 452        cmd->params.num_channels = n_channels;
 453        cmd->params.num_probe_requests = n_probes;
 454        cmd->params.tx_rate = cpu_to_le16(1 << 1); /* 2 Mbps */
 455        cmd->params.tid_trigger = 0;
 456
 457        for (i = 0; i < n_channels; i++) {
 458                cmd->channels[i].min_duration =
 459                        cpu_to_le32(WL1251_SCAN_MIN_DURATION);
 460                cmd->channels[i].max_duration =
 461                        cpu_to_le32(WL1251_SCAN_MAX_DURATION);
 462                memset(&cmd->channels[i].bssid_lsb, 0xff, 4);
 463                memset(&cmd->channels[i].bssid_msb, 0xff, 2);
 464                cmd->channels[i].early_termination = 0;
 465                cmd->channels[i].tx_power_att = 0;
 466                cmd->channels[i].channel = channels[i]->hw_value;
 467        }
 468
 469        cmd->params.ssid_len = ssid_len;
 470        if (ssid)
 471                memcpy(cmd->params.ssid, ssid, ssid_len);
 472
 473        ret = wl1251_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd));
 474        if (ret < 0) {
 475                wl1251_error("cmd scan failed: %d", ret);
 476                goto out;
 477        }
 478
 479        wl1251_mem_read(wl, wl->cmd_box_addr, cmd, sizeof(*cmd));
 480
 481        if (cmd->header.status != CMD_STATUS_SUCCESS) {
 482                wl1251_error("cmd scan status wasn't success: %d",
 483                             cmd->header.status);
 484                ret = -EIO;
 485                goto out;
 486        }
 487
 488out:
 489        kfree(cmd);
 490        return ret;
 491}
 492
 493int wl1251_cmd_trigger_scan_to(struct wl1251 *wl, u32 timeout)
 494{
 495        struct wl1251_cmd_trigger_scan_to *cmd;
 496        int ret;
 497
 498        wl1251_debug(DEBUG_CMD, "cmd trigger scan to");
 499
 500        cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
 501        if (!cmd)
 502                return -ENOMEM;
 503
 504        cmd->timeout = timeout;
 505
 506        ret = wl1251_cmd_send(wl, CMD_TRIGGER_SCAN_TO, cmd, sizeof(*cmd));
 507        if (ret < 0) {
 508                wl1251_error("cmd trigger scan to failed: %d", ret);
 509                goto out;
 510        }
 511
 512out:
 513        kfree(cmd);
 514        return ret;
 515}
 516