linux/drivers/regulator/isl9305.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-or-later
   2/*
   3 * isl9305 - Intersil ISL9305 DCDC regulator
   4 *
   5 * Copyright 2014 Linaro Ltd
   6 *
   7 * Author: Mark Brown <broonie@kernel.org>
   8 */
   9
  10#include <linux/module.h>
  11#include <linux/err.h>
  12#include <linux/i2c.h>
  13#include <linux/of.h>
  14#include <linux/platform_data/isl9305.h>
  15#include <linux/regmap.h>
  16#include <linux/regulator/driver.h>
  17#include <linux/regulator/of_regulator.h>
  18#include <linux/slab.h>
  19
  20/*
  21 * Registers
  22 */
  23#define ISL9305_DCD1OUT          0x0
  24#define ISL9305_DCD2OUT          0x1
  25#define ISL9305_LDO1OUT          0x2
  26#define ISL9305_LDO2OUT          0x3
  27#define ISL9305_DCD_PARAMETER    0x4
  28#define ISL9305_SYSTEM_PARAMETER 0x5
  29#define ISL9305_DCD_SRCTL        0x6
  30
  31#define ISL9305_MAX_REG ISL9305_DCD_SRCTL
  32
  33/*
  34 * DCD_PARAMETER
  35 */
  36#define ISL9305_DCD_PHASE   0x40
  37#define ISL9305_DCD2_ULTRA  0x20
  38#define ISL9305_DCD1_ULTRA  0x10
  39#define ISL9305_DCD2_BLD    0x08
  40#define ISL9305_DCD1_BLD    0x04
  41#define ISL9305_DCD2_MODE   0x02
  42#define ISL9305_DCD1_MODE   0x01
  43
  44/*
  45 * SYSTEM_PARAMETER
  46 */
  47#define ISL9305_I2C_EN      0x40
  48#define ISL9305_DCDPOR_MASK 0x30
  49#define ISL9305_LDO2_EN     0x08
  50#define ISL9305_LDO1_EN     0x04
  51#define ISL9305_DCD2_EN     0x02
  52#define ISL9305_DCD1_EN     0x01
  53
  54/*
  55 * DCD_SRCTL
  56 */
  57#define ISL9305_DCD2SR_MASK 0xc0
  58#define ISL9305_DCD1SR_MASK 0x07
  59
  60static const struct regulator_ops isl9305_ops = {
  61        .enable = regulator_enable_regmap,
  62        .disable = regulator_disable_regmap,
  63        .is_enabled = regulator_is_enabled_regmap,
  64        .list_voltage = regulator_list_voltage_linear,
  65        .get_voltage_sel = regulator_get_voltage_sel_regmap,
  66        .set_voltage_sel = regulator_set_voltage_sel_regmap,
  67};
  68
  69static const struct regulator_desc isl9305_regulators[] = {
  70        [ISL9305_DCD1] = {
  71                .name =         "DCD1",
  72                .of_match =     of_match_ptr("dcd1"),
  73                .regulators_node = of_match_ptr("regulators"),
  74                .n_voltages =   0x70,
  75                .min_uV =       825000,
  76                .uV_step =      25000,
  77                .vsel_reg =     ISL9305_DCD1OUT,
  78                .vsel_mask =    0x7f,
  79                .enable_reg =   ISL9305_SYSTEM_PARAMETER,
  80                .enable_mask =  ISL9305_DCD1_EN,
  81                .supply_name =  "VINDCD1",
  82                .ops =          &isl9305_ops,
  83                .owner =        THIS_MODULE,
  84        },
  85        [ISL9305_DCD2] = {
  86                .name =         "DCD2",
  87                .of_match =     of_match_ptr("dcd2"),
  88                .regulators_node = of_match_ptr("regulators"),
  89                .n_voltages =   0x70,
  90                .min_uV =       825000,
  91                .uV_step =      25000,
  92                .vsel_reg =     ISL9305_DCD2OUT,
  93                .vsel_mask =    0x7f,
  94                .enable_reg =   ISL9305_SYSTEM_PARAMETER,
  95                .enable_mask =  ISL9305_DCD2_EN,
  96                .supply_name =  "VINDCD2",
  97                .ops =          &isl9305_ops,
  98                .owner =        THIS_MODULE,
  99        },
 100        [ISL9305_LDO1] = {
 101                .name =         "LDO1",
 102                .of_match =     of_match_ptr("ldo1"),
 103                .regulators_node = of_match_ptr("regulators"),
 104                .n_voltages =   0x37,
 105                .min_uV =       900000,
 106                .uV_step =      50000,
 107                .vsel_reg =     ISL9305_LDO1OUT,
 108                .vsel_mask =    0x3f,
 109                .enable_reg =   ISL9305_SYSTEM_PARAMETER,
 110                .enable_mask =  ISL9305_LDO1_EN,
 111                .supply_name =  "VINLDO1",
 112                .ops =          &isl9305_ops,
 113                .owner =        THIS_MODULE,
 114        },
 115        [ISL9305_LDO2] = {
 116                .name =         "LDO2",
 117                .of_match =     of_match_ptr("ldo2"),
 118                .regulators_node = of_match_ptr("regulators"),
 119                .n_voltages =   0x37,
 120                .min_uV =       900000,
 121                .uV_step =      50000,
 122                .vsel_reg =     ISL9305_LDO2OUT,
 123                .vsel_mask =    0x3f,
 124                .enable_reg =   ISL9305_SYSTEM_PARAMETER,
 125                .enable_mask =  ISL9305_LDO2_EN,
 126                .supply_name =  "VINLDO2",
 127                .ops =          &isl9305_ops,
 128                .owner =        THIS_MODULE,
 129        },
 130};
 131
 132static const struct regmap_config isl9305_regmap = {
 133        .reg_bits = 8,
 134        .val_bits = 8,
 135
 136        .max_register = ISL9305_MAX_REG,
 137        .cache_type = REGCACHE_RBTREE,
 138};
 139
 140static int isl9305_i2c_probe(struct i2c_client *i2c,
 141                             const struct i2c_device_id *id)
 142{
 143        struct regulator_config config = { };
 144        struct isl9305_pdata *pdata = i2c->dev.platform_data;
 145        struct regulator_dev *rdev;
 146        struct regmap *regmap;
 147        int i, ret;
 148
 149        regmap = devm_regmap_init_i2c(i2c, &isl9305_regmap);
 150        if (IS_ERR(regmap)) {
 151                ret = PTR_ERR(regmap);
 152                dev_err(&i2c->dev, "Failed to create regmap: %d\n", ret);
 153                return ret;
 154        }
 155
 156        config.dev = &i2c->dev;
 157
 158        for (i = 0; i < ARRAY_SIZE(isl9305_regulators); i++) {
 159                if (pdata)
 160                        config.init_data = pdata->init_data[i];
 161                else
 162                        config.init_data = NULL;
 163
 164                rdev = devm_regulator_register(&i2c->dev,
 165                                               &isl9305_regulators[i],
 166                                               &config);
 167                if (IS_ERR(rdev)) {
 168                        ret = PTR_ERR(rdev);
 169                        dev_err(&i2c->dev, "Failed to register %s: %d\n",
 170                                isl9305_regulators[i].name, ret);
 171                        return ret;
 172                }
 173        }
 174
 175        return 0;
 176}
 177
 178#ifdef CONFIG_OF
 179static const struct of_device_id isl9305_dt_ids[] = {
 180        { .compatible = "isl,isl9305" }, /* for backward compat., don't use */
 181        { .compatible = "isil,isl9305" },
 182        { .compatible = "isl,isl9305h" }, /* for backward compat., don't use */
 183        { .compatible = "isil,isl9305h" },
 184        {},
 185};
 186MODULE_DEVICE_TABLE(of, isl9305_dt_ids);
 187#endif
 188
 189static const struct i2c_device_id isl9305_i2c_id[] = {
 190        { "isl9305", },
 191        { "isl9305h", },
 192        { }
 193};
 194MODULE_DEVICE_TABLE(i2c, isl9305_i2c_id);
 195
 196static struct i2c_driver isl9305_regulator_driver = {
 197        .driver = {
 198                .name = "isl9305",
 199                .of_match_table = of_match_ptr(isl9305_dt_ids),
 200        },
 201        .probe = isl9305_i2c_probe,
 202        .id_table = isl9305_i2c_id,
 203};
 204
 205module_i2c_driver(isl9305_regulator_driver);
 206
 207MODULE_AUTHOR("Mark Brown");
 208MODULE_DESCRIPTION("Intersil ISL9305 DCDC regulator");
 209MODULE_LICENSE("GPL");
 210