/* SPDX-License-Identifier: GPL-2.0-only */
/*
 * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
 * Copyright (c) 2014- QLogic Corporation.
 * All rights reserved
 * www.qlogic.com
 *
 * Linux driver for QLogic BR-series Fibre Channel Host Bus Adapter.
 */

/*
 * bfi_reg.h ASIC register defines for all QLogic BR-series adapter ASICs
 */

#ifndef __BFI_REG_H__
#define __BFI_REG_H__

#define HOSTFN0_INT_STATUS              0x00014000      /* cb/ct        */
#define HOSTFN1_INT_STATUS              0x00014100      /* cb/ct        */
#define HOSTFN2_INT_STATUS              0x00014300      /* ct           */
#define HOSTFN3_INT_STATUS              0x00014400      /* ct           */
#define HOSTFN0_INT_MSK                 0x00014004      /* cb/ct        */
#define HOSTFN1_INT_MSK                 0x00014104      /* cb/ct        */
#define HOSTFN2_INT_MSK                 0x00014304      /* ct           */
#define HOSTFN3_INT_MSK                 0x00014404      /* ct           */

#define HOST_PAGE_NUM_FN0               0x00014008      /* cb/ct        */
#define HOST_PAGE_NUM_FN1               0x00014108      /* cb/ct        */
#define HOST_PAGE_NUM_FN2               0x00014308      /* ct           */
#define HOST_PAGE_NUM_FN3               0x00014408      /* ct           */

#define APP_PLL_LCLK_CTL_REG            0x00014204      /* cb/ct        */
#define __P_LCLK_PLL_LOCK               0x80000000
#define __APP_PLL_LCLK_SRAM_USE_100MHZ  0x00100000
#define __APP_PLL_LCLK_RESET_TIMER_MK   0x000e0000
#define __APP_PLL_LCLK_RESET_TIMER_SH   17
#define __APP_PLL_LCLK_RESET_TIMER(_v)  ((_v) << __APP_PLL_LCLK_RESET_TIMER_SH)
#define __APP_PLL_LCLK_LOGIC_SOFT_RESET 0x00010000
#define __APP_PLL_LCLK_CNTLMT0_1_MK     0x0000c000
#define __APP_PLL_LCLK_CNTLMT0_1_SH     14
#define __APP_PLL_LCLK_CNTLMT0_1(_v)    ((_v) << __APP_PLL_LCLK_CNTLMT0_1_SH)
#define __APP_PLL_LCLK_JITLMT0_1_MK     0x00003000
#define __APP_PLL_LCLK_JITLMT0_1_SH     12
#define __APP_PLL_LCLK_JITLMT0_1(_v)    ((_v) << __APP_PLL_LCLK_JITLMT0_1_SH)
#define __APP_PLL_LCLK_HREF             0x00000800
#define __APP_PLL_LCLK_HDIV             0x00000400
#define __APP_PLL_LCLK_P0_1_MK          0x00000300
#define __APP_PLL_LCLK_P0_1_SH          8
#define __APP_PLL_LCLK_P0_1(_v)         ((_v) << __APP_PLL_LCLK_P0_1_SH)
#define __APP_PLL_LCLK_Z0_2_MK          0x000000e0
#define __APP_PLL_LCLK_Z0_2_SH          5
#define __APP_PLL_LCLK_Z0_2(_v)         ((_v) << __APP_PLL_LCLK_Z0_2_SH)
#define __APP_PLL_LCLK_RSEL200500       0x00000010
#define __APP_PLL_LCLK_ENARST           0x00000008
#define __APP_PLL_LCLK_BYPASS           0x00000004
#define __APP_PLL_LCLK_LRESETN          0x00000002
#define __APP_PLL_LCLK_ENABLE           0x00000001
#define APP_PLL_SCLK_CTL_REG            0x00014208      /* cb/ct        */
#define __P_SCLK_PLL_LOCK               0x80000000
#define __APP_PLL_SCLK_RESET_TIMER_MK   0x000e0000
#define __APP_PLL_SCLK_RESET_TIMER_SH   17
#define __APP_PLL_SCLK_RESET_TIMER(_v)  ((_v) << __APP_PLL_SCLK_RESET_TIMER_SH)
#define __APP_PLL_SCLK_LOGIC_SOFT_RESET 0x00010000
#define __APP_PLL_SCLK_CNTLMT0_1_MK     0x0000c000
#define __APP_PLL_SCLK_CNTLMT0_1_SH     14
#define __APP_PLL_SCLK_CNTLMT0_1(_v)    ((_v) << __APP_PLL_SCLK_CNTLMT0_1_SH)
#define __APP_PLL_SCLK_JITLMT0_1_MK     0x00003000
#define __APP_PLL_SCLK_JITLMT0_1_SH     12
#define __APP_PLL_SCLK_JITLMT0_1(_v)    ((_v) << __APP_PLL_SCLK_JITLMT0_1_SH)
#define __APP_PLL_SCLK_HREF             0x00000800
#define __APP_PLL_SCLK_HDIV             0x00000400
#define __APP_PLL_SCLK_P0_1_MK          0x00000300
#define __APP_PLL_SCLK_P0_1_SH          8
#define __APP_PLL_SCLK_P0_1(_v)         ((_v) << __APP_PLL_SCLK_P0_1_SH)
#define __APP_PLL_SCLK_Z0_2_MK          0x000000e0
#define __APP_PLL_SCLK_Z0_2_SH          5
#define __APP_PLL_SCLK_Z0_2(_v)         ((_v) << __APP_PLL_SCLK_Z0_2_SH)
#define __APP_PLL_SCLK_RSEL200500       0x00000010
#define __APP_PLL_SCLK_ENARST           0x00000008
#define __APP_PLL_SCLK_BYPASS           0x00000004
#define __APP_PLL_SCLK_LRESETN          0x00000002
#define __APP_PLL_SCLK_ENABLE           0x00000001
#define __ENABLE_MAC_AHB_1              0x00800000      /* ct           */
#define __ENABLE_MAC_AHB_0              0x00400000      /* ct           */
#define __ENABLE_MAC_1                  0x00200000      /* ct           */
#define __ENABLE_MAC_0                  0x00100000      /* ct           */

#define HOST_SEM0_REG                   0x00014230      /* cb/ct        */
#define HOST_SEM1_REG                   0x00014234      /* cb/ct        */
#define HOST_SEM2_REG                   0x00014238      /* cb/ct        */
#define HOST_SEM3_REG                   0x0001423c      /* cb/ct        */
#define HOST_SEM4_REG                   0x00014610      /* cb/ct        */
#define HOST_SEM5_REG                   0x00014614      /* cb/ct        */
#define HOST_SEM6_REG                   0x00014618      /* cb/ct        */
#define HOST_SEM7_REG                   0x0001461c      /* cb/ct        */
#define HOST_SEM0_INFO_REG              0x00014240      /* cb/ct        */
#define HOST_SEM1_INFO_REG              0x00014244      /* cb/ct        */
#define HOST_SEM2_INFO_REG              0x00014248      /* cb/ct        */
#define HOST_SEM3_INFO_REG              0x0001424c      /* cb/ct        */
#define HOST_SEM4_INFO_REG              0x00014620      /* cb/ct        */
#define HOST_SEM5_INFO_REG              0x00014624      /* cb/ct        */
#define HOST_SEM6_INFO_REG              0x00014628      /* cb/ct        */
#define HOST_SEM7_INFO_REG              0x0001462c      /* cb/ct        */

#define HOSTFN0_LPU0_CMD_STAT           0x00019000      /* cb/ct        */
#define HOSTFN0_LPU1_CMD_STAT           0x00019004      /* cb/ct        */
#define HOSTFN1_LPU0_CMD_STAT           0x00019010      /* cb/ct        */
#define HOSTFN1_LPU1_CMD_STAT           0x00019014      /* cb/ct        */
#define HOSTFN2_LPU0_CMD_STAT           0x00019150      /* ct           */
#define HOSTFN2_LPU1_CMD_STAT           0x00019154      /* ct           */
#define HOSTFN3_LPU0_CMD_STAT           0x00019160      /* ct           */
#define HOSTFN3_LPU1_CMD_STAT           0x00019164      /* ct           */
#define LPU0_HOSTFN0_CMD_STAT           0x00019008      /* cb/ct        */
#define LPU1_HOSTFN0_CMD_STAT           0x0001900c      /* cb/ct        */
#define LPU0_HOSTFN1_CMD_STAT           0x00019018      /* cb/ct        */
#define LPU1_HOSTFN1_CMD_STAT           0x0001901c      /* cb/ct        */
#define LPU0_HOSTFN2_CMD_STAT           0x00019158      /* ct           */
#define LPU1_HOSTFN2_CMD_STAT           0x0001915c      /* ct           */
#define LPU0_HOSTFN3_CMD_STAT           0x00019168      /* ct           */
#define LPU1_HOSTFN3_CMD_STAT           0x0001916c      /* ct           */

#define PSS_CTL_REG                     0x00018800      /* cb/ct        */
#define __PSS_I2C_CLK_DIV_MK            0x007f0000
#define __PSS_I2C_CLK_DIV_SH            16
#define __PSS_I2C_CLK_DIV(_v)           ((_v) << __PSS_I2C_CLK_DIV_SH)
#define __PSS_LMEM_INIT_DONE            0x00001000
#define __PSS_LMEM_RESET                0x00000200
#define __PSS_LMEM_INIT_EN              0x00000100
#define __PSS_LPU1_RESET                0x00000002
#define __PSS_LPU0_RESET                0x00000001
#define PSS_ERR_STATUS_REG              0x00018810      /* cb/ct        */
#define ERR_SET_REG                     0x00018818      /* cb/ct        */
#define PSS_GPIO_OUT_REG                0x000188c0      /* cb/ct        */
#define __PSS_GPIO_OUT_REG              0x00000fff
#define PSS_GPIO_OE_REG                 0x000188c8      /* cb/ct        */
#define __PSS_GPIO_OE_REG               0x000000ff

#define HOSTFN0_LPU_MBOX0_0             0x00019200      /* cb/ct        */
#define HOSTFN1_LPU_MBOX0_8             0x00019260      /* cb/ct        */
#define LPU_HOSTFN0_MBOX0_0             0x00019280      /* cb/ct        */
#define LPU_HOSTFN1_MBOX0_8             0x000192e0      /* cb/ct        */
#define HOSTFN2_LPU_MBOX0_0             0x00019400      /* ct           */
#define HOSTFN3_LPU_MBOX0_8             0x00019460      /* ct           */
#define LPU_HOSTFN2_MBOX0_0             0x00019480      /* ct           */
#define LPU_HOSTFN3_MBOX0_8             0x000194e0      /* ct           */

#define HOST_MSIX_ERR_INDEX_FN0         0x0001400c      /* ct           */
#define HOST_MSIX_ERR_INDEX_FN1         0x0001410c      /* ct           */
#define HOST_MSIX_ERR_INDEX_FN2         0x0001430c      /* ct           */
#define HOST_MSIX_ERR_INDEX_FN3         0x0001440c      /* ct           */

#define MBIST_CTL_REG                   0x00014220      /* ct           */
#define __EDRAM_BISTR_START             0x00000004
#define MBIST_STAT_REG                  0x00014224      /* ct           */
#define ETH_MAC_SER_REG                 0x00014288      /* ct           */
#define __APP_EMS_CKBUFAMPIN            0x00000020
#define __APP_EMS_REFCLKSEL             0x00000010
#define __APP_EMS_CMLCKSEL              0x00000008
#define __APP_EMS_REFCKBUFEN2           0x00000004
#define __APP_EMS_REFCKBUFEN1           0x00000002
#define __APP_EMS_CHANNEL_SEL           0x00000001
#define FNC_PERS_REG                    0x00014604      /* ct           */
#define __F3_FUNCTION_ACTIVE            0x80000000
#define __F3_FUNCTION_MODE              0x40000000
#define __F3_PORT_MAP_MK                0x30000000
#define __F3_PORT_MAP_SH                28
#define __F3_PORT_MAP(_v)               ((_v) << __F3_PORT_MAP_SH)
#define __F3_VM_MODE                    0x08000000
#define __F3_INTX_STATUS_MK             0x07000000
#define __F3_INTX_STATUS_SH             24
#define __F3_INTX_STATUS(_v)            ((_v) << __F3_INTX_STATUS_SH)
#define __F2_FUNCTION_ACTIVE            0x00800000
#define __F2_FUNCTION_MODE              0x00400000
#define __F2_PORT_MAP_MK                0x00300000
#define __F2_PORT_MAP_SH                20
#define __F2_PORT_MAP(_v)               ((_v) << __F2_PORT_MAP_SH)
#define __F2_VM_MODE                    0x00080000
#define __F2_INTX_STATUS_MK             0x00070000
#define __F2_INTX_STATUS_SH             16
#define __F2_INTX_STATUS(_v)            ((_v) << __F2_INTX_STATUS_SH)
#define __F1_FUNCTION_ACTIVE            0x00008000
#define __F1_FUNCTION_MODE              0x00004000
#define __F1_PORT_MAP_MK                0x00003000
#define __F1_PORT_MAP_SH                12
#define __F1_PORT_MAP(_v)               ((_v) << __F1_PORT_MAP_SH)
#define __F1_VM_MODE                    0x00000800
#define __F1_INTX_STATUS_MK             0x00000700
#define __F1_INTX_STATUS_SH             8
#define __F1_INTX_STATUS(_v)            ((_v) << __F1_INTX_STATUS_SH)
#define __F0_FUNCTION_ACTIVE            0x00000080
#define __F0_FUNCTION_MODE              0x00000040
#define __F0_PORT_MAP_MK                0x00000030
#define __F0_PORT_MAP_SH                4
#define __F0_PORT_MAP(_v)               ((_v) << __F0_PORT_MAP_SH)
#define __F0_VM_MODE                    0x00000008
#define __F0_INTX_STATUS                0x00000007
enum {
        __F0_INTX_STATUS_MSIX = 0x0,
        __F0_INTX_STATUS_INTA = 0x1,
        __F0_INTX_STATUS_INTB = 0x2,
        __F0_INTX_STATUS_INTC = 0x3,
        __F0_INTX_STATUS_INTD = 0x4,
};

#define OP_MODE                         0x0001460c      /* ct           */
#define __APP_ETH_CLK_LOWSPEED          0x00000004
#define __GLOBAL_CORECLK_HALFSPEED      0x00000002
#define __GLOBAL_FCOE_MODE              0x00000001
#define FW_INIT_HALT_P0                 0x000191ac      /* ct           */
#define __FW_INIT_HALT_P                0x00000001
#define FW_INIT_HALT_P1                 0x000191bc      /* ct           */
#define PMM_1T_RESET_REG_P0             0x0002381c      /* ct           */
#define __PMM_1T_RESET_P                0x00000001
#define PMM_1T_RESET_REG_P1             0x00023c1c      /* ct           */

/**
 * Catapult-2 specific defines
 */
#define CT2_PCI_CPQ_BASE                0x00030000
#define CT2_PCI_APP_BASE                0x00030100
#define CT2_PCI_ETH_BASE                0x00030400

/*
 * APP block registers
 */
#define CT2_HOSTFN_INT_STATUS           (CT2_PCI_APP_BASE + 0x00)
#define CT2_HOSTFN_INTR_MASK            (CT2_PCI_APP_BASE + 0x04)
#define CT2_HOSTFN_PERSONALITY0         (CT2_PCI_APP_BASE + 0x08)
#define __PME_STATUS_                   0x00200000
#define __PF_VF_BAR_SIZE_MODE__MK       0x00180000
#define __PF_VF_BAR_SIZE_MODE__SH       19
#define __PF_VF_BAR_SIZE_MODE_(_v)      ((_v) << __PF_VF_BAR_SIZE_MODE__SH)
#define __FC_LL_PORT_MAP__MK            0x00060000
#define __FC_LL_PORT_MAP__SH            17
#define __FC_LL_PORT_MAP_(_v)           ((_v) << __FC_LL_PORT_MAP__SH)
#define __PF_VF_ACTIVE_                 0x00010000
#define __PF_VF_CFG_RDY_                0x00008000
#define __PF_VF_ENABLE_                 0x00004000
#define __PF_DRIVER_ACTIVE_             0x00002000
#define __PF_PME_SEND_ENABLE_           0x00001000
#define __PF_EXROM_OFFSET__MK           0x00000ff0
#define __PF_EXROM_OFFSET__SH           4
#define __PF_EXROM_OFFSET_(_v)          ((_v) << __PF_EXROM_OFFSET__SH)
#define __FC_LL_MODE_                   0x00000008
#define __PF_INTX_PIN_                  0x00000007
#define CT2_HOSTFN_PERSONALITY1         (CT2_PCI_APP_BASE + 0x0C)
#define __PF_NUM_QUEUES1__MK            0xff000000
#define __PF_NUM_QUEUES1__SH            24
#define __PF_NUM_QUEUES1_(_v)           ((_v) << __PF_NUM_QUEUES1__SH)
#define __PF_VF_QUE_OFFSET1__MK         0x00ff0000
#define __PF_VF_QUE_OFFSET1__SH         16
#define __PF_VF_QUE_OFFSET1_(_v)        ((_v) << __PF_VF_QUE_OFFSET1__SH)
#define __PF_VF_NUM_QUEUES__MK          0x0000ff00
#define __PF_VF_NUM_QUEUES__SH          8
#define __PF_VF_NUM_QUEUES_(_v)         ((_v) << __PF_VF_NUM_QUEUES__SH)
#define __PF_VF_QUE_OFFSET_             0x000000ff
#define CT2_HOSTFN_PAGE_NUM             (CT2_PCI_APP_BASE + 0x18)
#define CT2_HOSTFN_MSIX_VT_INDEX_MBOX_ERR       (CT2_PCI_APP_BASE + 0x38)

/*
 * Catapult-2 CPQ block registers
 */
#define CT2_HOSTFN_LPU0_MBOX0           (CT2_PCI_CPQ_BASE + 0x00)
#define CT2_HOSTFN_LPU1_MBOX0           (CT2_PCI_CPQ_BASE + 0x20)
#define CT2_LPU0_HOSTFN_MBOX0           (CT2_PCI_CPQ_BASE + 0x40)
#define CT2_LPU1_HOSTFN_MBOX0           (CT2_PCI_CPQ_BASE + 0x60)
#define CT2_HOSTFN_LPU0_CMD_STAT        (CT2_PCI_CPQ_BASE + 0x80)
#define CT2_HOSTFN_LPU1_CMD_STAT        (CT2_PCI_CPQ_BASE + 0x84)
#define CT2_LPU0_HOSTFN_CMD_STAT        (CT2_PCI_CPQ_BASE + 0x88)
#define CT2_LPU1_HOSTFN_CMD_STAT        (CT2_PCI_CPQ_BASE + 0x8c)
#define CT2_HOSTFN_LPU0_READ_STAT       (CT2_PCI_CPQ_BASE + 0x90)
#define CT2_HOSTFN_LPU1_READ_STAT       (CT2_PCI_CPQ_BASE + 0x94)
#define CT2_LPU0_HOSTFN_MBOX0_MSK       (CT2_PCI_CPQ_BASE + 0x98)
#define CT2_LPU1_HOSTFN_MBOX0_MSK       (CT2_PCI_CPQ_BASE + 0x9C)
#define CT2_HOST_SEM0_REG               0x000148f0
#define CT2_HOST_SEM1_REG               0x000148f4
#define CT2_HOST_SEM2_REG               0x000148f8
#define CT2_HOST_SEM3_REG               0x000148fc
#define CT2_HOST_SEM4_REG               0x00014900
#define CT2_HOST_SEM5_REG               0x00014904
#define CT2_HOST_SEM6_REG               0x00014908
#define CT2_HOST_SEM7_REG               0x0001490c
#define CT2_HOST_SEM0_INFO_REG          0x000148b0
#define CT2_HOST_SEM1_INFO_REG          0x000148b4
#define CT2_HOST_SEM2_INFO_REG          0x000148b8
#define CT2_HOST_SEM3_INFO_REG          0x000148bc
#define CT2_HOST_SEM4_INFO_REG          0x000148c0
#define CT2_HOST_SEM5_INFO_REG          0x000148c4
#define CT2_HOST_SEM6_INFO_REG          0x000148c8
#define CT2_HOST_SEM7_INFO_REG          0x000148cc

#define CT2_APP_PLL_LCLK_CTL_REG        0x00014808
#define __APP_LPUCLK_HALFSPEED          0x40000000
#define __APP_PLL_LCLK_LOAD             0x20000000
#define __APP_PLL_LCLK_FBCNT_MK         0x1fe00000
#define __APP_PLL_LCLK_FBCNT_SH         21
#define __APP_PLL_LCLK_FBCNT(_v)        ((_v) << __APP_PLL_SCLK_FBCNT_SH)
enum {
        __APP_PLL_LCLK_FBCNT_425_MHZ = 6,
        __APP_PLL_LCLK_FBCNT_468_MHZ = 4,
};
#define __APP_PLL_LCLK_EXTFB            0x00000800
#define __APP_PLL_LCLK_ENOUTS           0x00000400
#define __APP_PLL_LCLK_RATE             0x00000010
#define CT2_APP_PLL_SCLK_CTL_REG        0x0001480c
#define __P_SCLK_PLL_LOCK               0x80000000
#define __APP_PLL_SCLK_REFCLK_SEL       0x40000000
#define __APP_PLL_SCLK_CLK_DIV2         0x20000000
#define __APP_PLL_SCLK_LOAD             0x10000000
#define __APP_PLL_SCLK_FBCNT_MK         0x0ff00000
#define __APP_PLL_SCLK_FBCNT_SH         20
#define __APP_PLL_SCLK_FBCNT(_v)        ((_v) << __APP_PLL_SCLK_FBCNT_SH)
enum {
        __APP_PLL_SCLK_FBCNT_NORM = 6,
        __APP_PLL_SCLK_FBCNT_10G_FC = 10,
};
#define __APP_PLL_SCLK_EXTFB            0x00000800
#define __APP_PLL_SCLK_ENOUTS           0x00000400
#define __APP_PLL_SCLK_RATE             0x00000010
#define CT2_PCIE_MISC_REG               0x00014804
#define __ETH_CLK_ENABLE_PORT1          0x00000010
#define CT2_CHIP_MISC_PRG               0x000148a4
#define __ETH_CLK_ENABLE_PORT0          0x00004000
#define __APP_LPU_SPEED                 0x00000002
#define CT2_MBIST_STAT_REG              0x00014818
#define CT2_MBIST_CTL_REG               0x0001481c
#define CT2_PMM_1T_CONTROL_REG_P0       0x0002381c
#define __PMM_1T_PNDB_P                 0x00000002
#define CT2_PMM_1T_CONTROL_REG_P1       0x00023c1c
#define CT2_WGN_STATUS                  0x00014990
#define __A2T_AHB_LOAD                  0x00000800
#define __WGN_READY                     0x00000400
#define __GLBL_PF_VF_CFG_RDY            0x00000200
#define CT2_NFC_STS_REG                 0x00027410
#define CT2_NFC_CSR_CLR_REG             0x00027420
#define CT2_NFC_CSR_SET_REG             0x00027424
#define __HALT_NFC_CONTROLLER           0x00000002
#define __NFC_CONTROLLER_HALTED         0x00001000
#define CT2_RSC_GPR15_REG               0x0002765c
#define CT2_CSI_FW_CTL_REG              0x00027080
#define CT2_CSI_FW_CTL_SET_REG          0x00027088
#define __RESET_AND_START_SCLK_LCLK_PLLS 0x00010000

#define CT2_CSI_MAC0_CONTROL_REG        0x000270d0
#define __CSI_MAC_RESET                 0x00000010
#define __CSI_MAC_AHB_RESET             0x00000008
#define CT2_CSI_MAC1_CONTROL_REG        0x000270d4
#define CT2_CSI_MAC_CONTROL_REG(__n)    \
        (CT2_CSI_MAC0_CONTROL_REG +     \
        (__n) * (CT2_CSI_MAC1_CONTROL_REG - CT2_CSI_MAC0_CONTROL_REG))

#define CT2_NFC_FLASH_STS_REG           0x00014834
#define __FLASH_PLL_INIT_AND_RESET_IN_PROGRESS  0x00000020
/*
 * Name semaphore registers based on usage
 */
#define BFA_IOC0_HBEAT_REG              HOST_SEM0_INFO_REG
#define BFA_IOC0_STATE_REG              HOST_SEM1_INFO_REG
#define BFA_IOC1_HBEAT_REG              HOST_SEM2_INFO_REG
#define BFA_IOC1_STATE_REG              HOST_SEM3_INFO_REG
#define BFA_FW_USE_COUNT                HOST_SEM4_INFO_REG
#define BFA_IOC_FAIL_SYNC               HOST_SEM5_INFO_REG

/*
 * CT2 semaphore register locations changed
 */
#define CT2_BFA_IOC0_HBEAT_REG          CT2_HOST_SEM0_INFO_REG
#define CT2_BFA_IOC0_STATE_REG          CT2_HOST_SEM1_INFO_REG
#define CT2_BFA_IOC1_HBEAT_REG          CT2_HOST_SEM2_INFO_REG
#define CT2_BFA_IOC1_STATE_REG          CT2_HOST_SEM3_INFO_REG
#define CT2_BFA_FW_USE_COUNT            CT2_HOST_SEM4_INFO_REG
#define CT2_BFA_IOC_FAIL_SYNC           CT2_HOST_SEM5_INFO_REG

#define CPE_Q_NUM(__fn, __q)    (((__fn) << 2) + (__q))
#define RME_Q_NUM(__fn, __q)    (((__fn) << 2) + (__q))

/*
 * And corresponding host interrupt status bit field defines
 */
#define __HFN_INT_CPE_Q0        0x00000001U
#define __HFN_INT_CPE_Q1        0x00000002U
#define __HFN_INT_CPE_Q2        0x00000004U
#define __HFN_INT_CPE_Q3        0x00000008U
#define __HFN_INT_CPE_Q4        0x00000010U
#define __HFN_INT_CPE_Q5        0x00000020U
#define __HFN_INT_CPE_Q6        0x00000040U
#define __HFN_INT_CPE_Q7        0x00000080U
#define __HFN_INT_RME_Q0        0x00000100U
#define __HFN_INT_RME_Q1        0x00000200U
#define __HFN_INT_RME_Q2        0x00000400U
#define __HFN_INT_RME_Q3        0x00000800U
#define __HFN_INT_RME_Q4        0x00001000U
#define __HFN_INT_RME_Q5        0x00002000U
#define __HFN_INT_RME_Q6        0x00004000U
#define __HFN_INT_RME_Q7        0x00008000U
#define __HFN_INT_ERR_EMC       0x00010000U
#define __HFN_INT_ERR_LPU0      0x00020000U
#define __HFN_INT_ERR_LPU1      0x00040000U
#define __HFN_INT_ERR_PSS       0x00080000U
#define __HFN_INT_MBOX_LPU0     0x00100000U
#define __HFN_INT_MBOX_LPU1     0x00200000U
#define __HFN_INT_MBOX1_LPU0    0x00400000U
#define __HFN_INT_MBOX1_LPU1    0x00800000U
#define __HFN_INT_LL_HALT       0x01000000U
#define __HFN_INT_CPE_MASK      0x000000ffU
#define __HFN_INT_RME_MASK      0x0000ff00U
#define __HFN_INT_ERR_MASK      \
        (__HFN_INT_ERR_EMC | __HFN_INT_ERR_LPU0 | __HFN_INT_ERR_LPU1 | \
         __HFN_INT_ERR_PSS | __HFN_INT_LL_HALT)
#define __HFN_INT_FN0_MASK      \
        (__HFN_INT_CPE_Q0 | __HFN_INT_CPE_Q1 | __HFN_INT_CPE_Q2 | \
         __HFN_INT_CPE_Q3 | __HFN_INT_RME_Q0 | __HFN_INT_RME_Q1 | \
         __HFN_INT_RME_Q2 | __HFN_INT_RME_Q3 | __HFN_INT_MBOX_LPU0)
#define __HFN_INT_FN1_MASK      \
        (__HFN_INT_CPE_Q4 | __HFN_INT_CPE_Q5 | __HFN_INT_CPE_Q6 | \
         __HFN_INT_CPE_Q7 | __HFN_INT_RME_Q4 | __HFN_INT_RME_Q5 | \
         __HFN_INT_RME_Q6 | __HFN_INT_RME_Q7 | __HFN_INT_MBOX_LPU1)

/*
 * Host interrupt status defines for catapult-2
 */
#define __HFN_INT_MBOX_LPU0_CT2 0x00010000U
#define __HFN_INT_MBOX_LPU1_CT2 0x00020000U
#define __HFN_INT_ERR_PSS_CT2   0x00040000U
#define __HFN_INT_ERR_LPU0_CT2  0x00080000U
#define __HFN_INT_ERR_LPU1_CT2  0x00100000U
#define __HFN_INT_CPQ_HALT_CT2  0x00200000U
#define __HFN_INT_ERR_WGN_CT2   0x00400000U
#define __HFN_INT_ERR_LEHRX_CT2 0x00800000U
#define __HFN_INT_ERR_LEHTX_CT2 0x01000000U
#define __HFN_INT_ERR_MASK_CT2  \
        (__HFN_INT_ERR_PSS_CT2 | __HFN_INT_ERR_LPU0_CT2 | \
         __HFN_INT_ERR_LPU1_CT2 | __HFN_INT_CPQ_HALT_CT2 | \
         __HFN_INT_ERR_WGN_CT2 | __HFN_INT_ERR_LEHRX_CT2 | \
         __HFN_INT_ERR_LEHTX_CT2)
#define __HFN_INT_FN0_MASK_CT2  \
        (__HFN_INT_CPE_Q0 | __HFN_INT_CPE_Q1 | __HFN_INT_CPE_Q2 | \
         __HFN_INT_CPE_Q3 | __HFN_INT_RME_Q0 | __HFN_INT_RME_Q1 | \
         __HFN_INT_RME_Q2 | __HFN_INT_RME_Q3 | __HFN_INT_MBOX_LPU0_CT2)
#define __HFN_INT_FN1_MASK_CT2  \
        (__HFN_INT_CPE_Q4 | __HFN_INT_CPE_Q5 | __HFN_INT_CPE_Q6 | \
         __HFN_INT_CPE_Q7 | __HFN_INT_RME_Q4 | __HFN_INT_RME_Q5 | \
         __HFN_INT_RME_Q6 | __HFN_INT_RME_Q7 | __HFN_INT_MBOX_LPU1_CT2)

/*
 * asic memory map.
 */
#define PSS_SMEM_PAGE_START             0x8000
#define PSS_SMEM_PGNUM(_pg0, _ma)       ((_pg0) + ((_ma) >> 15))
#define PSS_SMEM_PGOFF(_ma)             ((_ma) & 0x7fff)

#endif /* __BFI_REG_H__ */