/*
 *    Disk Array driver for HP Smart Array SAS controllers
 *    Copyright 2016 Microsemi Corporation
 *    Copyright 2014-2015 PMC-Sierra, Inc.
 *    Copyright 2000,2009-2015 Hewlett-Packard Development Company, L.P.
 *
 *    This program is free software; you can redistribute it and/or modify
 *    it under the terms of the GNU General Public License as published by
 *    the Free Software Foundation; version 2 of the License.
 *
 *    This program is distributed in the hope that it will be useful,
 *    but WITHOUT ANY WARRANTY; without even the implied warranty of
 *    MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
 *    NON INFRINGEMENT.  See the GNU General Public License for more details.
 *
 *    Questions/Comments/Bugfixes to esc.storagedev@microsemi.com
 *
 */
#ifndef HPSA_H
#define HPSA_H

#include <scsi/scsicam.h>

#define IO_OK           0
#define IO_ERROR        1

struct ctlr_info;

struct access_method {
        void (*submit_command)(struct ctlr_info *h,
                struct CommandList *c);
        void (*set_intr_mask)(struct ctlr_info *h, unsigned long val);
        bool (*intr_pending)(struct ctlr_info *h);
        unsigned long (*command_completed)(struct ctlr_info *h, u8 q);
};

/* for SAS hosts and SAS expanders */
struct hpsa_sas_node {
        struct device *parent_dev;
        struct list_head port_list_head;
};

struct hpsa_sas_port {
        struct list_head port_list_entry;
        u64 sas_address;
        struct sas_port *port;
        int next_phy_index;
        struct list_head phy_list_head;
        struct hpsa_sas_node *parent_node;
        struct sas_rphy *rphy;
};

struct hpsa_sas_phy {
        struct list_head phy_list_entry;
        struct sas_phy *phy;
        struct hpsa_sas_port *parent_port;
        bool added_to_port;
};

#define EXTERNAL_QD 7
struct hpsa_scsi_dev_t {
        unsigned int devtype;
        int bus, target, lun;           /* as presented to the OS */
        unsigned char scsi3addr[8];     /* as presented to the HW */
        u8 physical_device : 1;
        u8 expose_device;
        u8 removed : 1;                 /* device is marked for death */
        u8 was_removed : 1;             /* device actually removed */
#define RAID_CTLR_LUNID "\0\0\0\0\0\0\0\0"
        unsigned char device_id[16];    /* from inquiry pg. 0x83 */
        u64 sas_address;
        u64 eli;                        /* from report diags. */
        unsigned char vendor[8];        /* bytes 8-15 of inquiry data */
        unsigned char model[16];        /* bytes 16-31 of inquiry data */
        unsigned char rev;              /* byte 2 of inquiry data */
        unsigned char raid_level;       /* from inquiry page 0xC1 */
        unsigned char volume_offline;   /* discovered via TUR or VPD */
        u16 queue_depth;                /* max queue_depth for this device */
        atomic_t commands_outstanding;  /* track commands sent to device */
        atomic_t ioaccel_cmds_out;      /* Only used for physical devices
                                         * counts commands sent to physical
                                         * device via "ioaccel" path.
                                         */
        bool in_reset;
        u32 ioaccel_handle;
        u8 active_path_index;
        u8 path_map;
        u8 bay;
        u8 box[8];
        u16 phys_connector[8];
        int offload_config;             /* I/O accel RAID offload configured */
        int offload_enabled;            /* I/O accel RAID offload enabled */
        int offload_to_be_enabled;
        int hba_ioaccel_enabled;
        int offload_to_mirror;          /* Send next I/O accelerator RAID
                                         * offload request to mirror drive
                                         */
        struct raid_map_data raid_map;  /* I/O accelerator RAID map */

        /*
         * Pointers from logical drive map indices to the phys drives that
         * make those logical drives.  Note, multiple logical drives may
         * share physical drives.  You can have for instance 5 physical
         * drives with 3 logical drives each using those same 5 physical
         * disks. We need these pointers for counting i/o's out to physical
         * devices in order to honor physical device queue depth limits.
         */
        struct hpsa_scsi_dev_t *phys_disk[RAID_MAP_MAX_ENTRIES];
        int nphysical_disks;
        int supports_aborts;
        struct hpsa_sas_port *sas_port;
        int external;   /* 1-from external array 0-not <0-unknown */
};

struct reply_queue_buffer {
        u64 *head;
        size_t size;
        u8 wraparound;
        u32 current_entry;
        dma_addr_t busaddr;
};

#pragma pack(1)
struct bmic_controller_parameters {
        u8   led_flags;
        u8   enable_command_list_verification;
        u8   backed_out_write_drives;
        u16  stripes_for_parity;
        u8   parity_distribution_mode_flags;
        u16  max_driver_requests;
        u16  elevator_trend_count;
        u8   disable_elevator;
        u8   force_scan_complete;
        u8   scsi_transfer_mode;
        u8   force_narrow;
        u8   rebuild_priority;
        u8   expand_priority;
        u8   host_sdb_asic_fix;
        u8   pdpi_burst_from_host_disabled;
        char software_name[64];
        char hardware_name[32];
        u8   bridge_revision;
        u8   snapshot_priority;
        u32  os_specific;
        u8   post_prompt_timeout;
        u8   automatic_drive_slamming;
        u8   reserved1;
        u8   nvram_flags;
        u8   cache_nvram_flags;
        u8   drive_config_flags;
        u16  reserved2;
        u8   temp_warning_level;
        u8   temp_shutdown_level;
        u8   temp_condition_reset;
        u8   max_coalesce_commands;
        u32  max_coalesce_delay;
        u8   orca_password[4];
        u8   access_id[16];
        u8   reserved[356];
};
#pragma pack()

struct ctlr_info {
        unsigned int *reply_map;
        int     ctlr;
        char    devname[8];
        char    *product_name;
        struct pci_dev *pdev;
        u32     board_id;
        u64     sas_address;
        void __iomem *vaddr;
        unsigned long paddr;
        int     nr_cmds; /* Number of commands allowed on this controller */
#define HPSA_CMDS_RESERVED_FOR_ABORTS 2
#define HPSA_CMDS_RESERVED_FOR_DRIVER 1
        struct CfgTable __iomem *cfgtable;
        int     interrupts_enabled;
        int     max_commands;
        int     last_collision_tag; /* tags are global */
        atomic_t commands_outstanding;
#       define PERF_MODE_INT    0
#       define DOORBELL_INT     1
#       define SIMPLE_MODE_INT  2
#       define MEMQ_MODE_INT    3
        unsigned int msix_vectors;
        int intr_mode; /* either PERF_MODE_INT or SIMPLE_MODE_INT */
        struct access_method access;

        /* queue and queue Info */
        unsigned int Qdepth;
        unsigned int maxSG;
        spinlock_t lock;
        int maxsgentries;
        u8 max_cmd_sg_entries;
        int chainsize;
        struct SGDescriptor **cmd_sg_list;
        struct ioaccel2_sg_element **ioaccel2_cmd_sg_list;

        /* pointers to command and error info pool */
        struct CommandList      *cmd_pool;
        dma_addr_t              cmd_pool_dhandle;
        struct io_accel1_cmd    *ioaccel_cmd_pool;
        dma_addr_t              ioaccel_cmd_pool_dhandle;
        struct io_accel2_cmd    *ioaccel2_cmd_pool;
        dma_addr_t              ioaccel2_cmd_pool_dhandle;
        struct ErrorInfo        *errinfo_pool;
        dma_addr_t              errinfo_pool_dhandle;
        unsigned long           *cmd_pool_bits;
        int                     scan_finished;
        u8                      scan_waiting : 1;
        spinlock_t              scan_lock;
        wait_queue_head_t       scan_wait_queue;

        struct Scsi_Host *scsi_host;
        spinlock_t devlock; /* to protect hba[ctlr]->dev[];  */
        int ndevices; /* number of used elements in .dev[] array. */
        struct hpsa_scsi_dev_t *dev[HPSA_MAX_DEVICES];
        /*
         * Performant mode tables.
         */
        u32 trans_support;
        u32 trans_offset;
        struct TransTable_struct __iomem *transtable;
        unsigned long transMethod;

        /* cap concurrent passthrus at some reasonable maximum */
#define HPSA_MAX_CONCURRENT_PASSTHRUS (10)
        atomic_t passthru_cmds_avail;

        /*
         * Performant mode completion buffers
         */
        size_t reply_queue_size;
        struct reply_queue_buffer reply_queue[MAX_REPLY_QUEUES];
        u8 nreply_queues;
        u32 *blockFetchTable;
        u32 *ioaccel1_blockFetchTable;
        u32 *ioaccel2_blockFetchTable;
        u32 __iomem *ioaccel2_bft2_regs;
        unsigned char *hba_inquiry_data;
        u32 driver_support;
        u32 fw_support;
        int ioaccel_support;
        int ioaccel_maxsg;
        u64 last_intr_timestamp;
        u32 last_heartbeat;
        u64 last_heartbeat_timestamp;
        u32 heartbeat_sample_interval;
        atomic_t firmware_flash_in_progress;
        u32 __percpu *lockup_detected;
        struct delayed_work monitor_ctlr_work;
        struct delayed_work rescan_ctlr_work;
        struct delayed_work event_monitor_work;
        int remove_in_progress;
        /* Address of h->q[x] is passed to intr handler to know which queue */
        u8 q[MAX_REPLY_QUEUES];
        char intrname[MAX_REPLY_QUEUES][16];    /* "hpsa0-msix00" names */
        u32 TMFSupportFlags; /* cache what task mgmt funcs are supported. */
#define HPSATMF_BITS_SUPPORTED  (1 << 0)
#define HPSATMF_PHYS_LUN_RESET  (1 << 1)
#define HPSATMF_PHYS_NEX_RESET  (1 << 2)
#define HPSATMF_PHYS_TASK_ABORT (1 << 3)
#define HPSATMF_PHYS_TSET_ABORT (1 << 4)
#define HPSATMF_PHYS_CLEAR_ACA  (1 << 5)
#define HPSATMF_PHYS_CLEAR_TSET (1 << 6)
#define HPSATMF_PHYS_QRY_TASK   (1 << 7)
#define HPSATMF_PHYS_QRY_TSET   (1 << 8)
#define HPSATMF_PHYS_QRY_ASYNC  (1 << 9)
#define HPSATMF_IOACCEL_ENABLED (1 << 15)
#define HPSATMF_MASK_SUPPORTED  (1 << 16)
#define HPSATMF_LOG_LUN_RESET   (1 << 17)
#define HPSATMF_LOG_NEX_RESET   (1 << 18)
#define HPSATMF_LOG_TASK_ABORT  (1 << 19)
#define HPSATMF_LOG_TSET_ABORT  (1 << 20)
#define HPSATMF_LOG_CLEAR_ACA   (1 << 21)
#define HPSATMF_LOG_CLEAR_TSET  (1 << 22)
#define HPSATMF_LOG_QRY_TASK    (1 << 23)
#define HPSATMF_LOG_QRY_TSET    (1 << 24)
#define HPSATMF_LOG_QRY_ASYNC   (1 << 25)
        u32 events;
#define CTLR_STATE_CHANGE_EVENT                         (1 << 0)
#define CTLR_ENCLOSURE_HOT_PLUG_EVENT                   (1 << 1)
#define CTLR_STATE_CHANGE_EVENT_PHYSICAL_DRV            (1 << 4)
#define CTLR_STATE_CHANGE_EVENT_LOGICAL_DRV             (1 << 5)
#define CTLR_STATE_CHANGE_EVENT_REDUNDANT_CNTRL         (1 << 6)
#define CTLR_STATE_CHANGE_EVENT_AIO_ENABLED_DISABLED    (1 << 30)
#define CTLR_STATE_CHANGE_EVENT_AIO_CONFIG_CHANGE       (1 << 31)

#define RESCAN_REQUIRED_EVENT_BITS \
                (CTLR_ENCLOSURE_HOT_PLUG_EVENT | \
                CTLR_STATE_CHANGE_EVENT_PHYSICAL_DRV | \
                CTLR_STATE_CHANGE_EVENT_LOGICAL_DRV | \
                CTLR_STATE_CHANGE_EVENT_AIO_ENABLED_DISABLED | \
                CTLR_STATE_CHANGE_EVENT_AIO_CONFIG_CHANGE)
        spinlock_t offline_device_lock;
        struct list_head offline_device_list;
        int     acciopath_status;
        int     drv_req_rescan;
        int     raid_offload_debug;
        int     discovery_polling;
        int     legacy_board;
        struct  ReportLUNdata *lastlogicals;
        int     needs_abort_tags_swizzled;
        struct workqueue_struct *resubmit_wq;
        struct workqueue_struct *rescan_ctlr_wq;
        struct workqueue_struct *monitor_ctlr_wq;
        atomic_t abort_cmds_available;
        wait_queue_head_t event_sync_wait_queue;
        struct mutex reset_mutex;
        u8 reset_in_progress;
        struct hpsa_sas_node *sas_host;
        spinlock_t reset_lock;
};

struct offline_device_entry {
        unsigned char scsi3addr[8];
        struct list_head offline_list;
};

#define HPSA_ABORT_MSG 0
#define HPSA_DEVICE_RESET_MSG 1
#define HPSA_RESET_TYPE_CONTROLLER 0x00
#define HPSA_RESET_TYPE_BUS 0x01
#define HPSA_RESET_TYPE_LUN 0x04
#define HPSA_PHYS_TARGET_RESET 0x99 /* not defined by cciss spec */
#define HPSA_MSG_SEND_RETRY_LIMIT 10
#define HPSA_MSG_SEND_RETRY_INTERVAL_MSECS (10000)

/* Maximum time in seconds driver will wait for command completions
 * when polling before giving up.
 */
#define HPSA_MAX_POLL_TIME_SECS (20)

/* During SCSI error recovery, HPSA_TUR_RETRY_LIMIT defines
 * how many times to retry TEST UNIT READY on a device
 * while waiting for it to become ready before giving up.
 * HPSA_MAX_WAIT_INTERVAL_SECS is the max wait interval
 * between sending TURs while waiting for a device
 * to become ready.
 */
#define HPSA_TUR_RETRY_LIMIT (20)
#define HPSA_MAX_WAIT_INTERVAL_SECS (30)

/* HPSA_BOARD_READY_WAIT_SECS is how long to wait for a board
 * to become ready, in seconds, before giving up on it.
 * HPSA_BOARD_READY_POLL_INTERVAL_MSECS * is how long to wait
 * between polling the board to see if it is ready, in
 * milliseconds.  HPSA_BOARD_READY_POLL_INTERVAL and
 * HPSA_BOARD_READY_ITERATIONS are derived from those.
 */
#define HPSA_BOARD_READY_WAIT_SECS (120)
#define HPSA_BOARD_NOT_READY_WAIT_SECS (100)
#define HPSA_BOARD_READY_POLL_INTERVAL_MSECS (100)
#define HPSA_BOARD_READY_POLL_INTERVAL \
        ((HPSA_BOARD_READY_POLL_INTERVAL_MSECS * HZ) / 1000)
#define HPSA_BOARD_READY_ITERATIONS \
        ((HPSA_BOARD_READY_WAIT_SECS * 1000) / \
                HPSA_BOARD_READY_POLL_INTERVAL_MSECS)
#define HPSA_BOARD_NOT_READY_ITERATIONS \
        ((HPSA_BOARD_NOT_READY_WAIT_SECS * 1000) / \
                HPSA_BOARD_READY_POLL_INTERVAL_MSECS)
#define HPSA_POST_RESET_PAUSE_MSECS (3000)
#define HPSA_POST_RESET_NOOP_RETRIES (12)

/*  Defining the diffent access_menthods */
/*
 * Memory mapped FIFO interface (SMART 53xx cards)
 */
#define SA5_DOORBELL    0x20
#define SA5_REQUEST_PORT_OFFSET 0x40
#define SA5_REQUEST_PORT64_LO_OFFSET 0xC0
#define SA5_REQUEST_PORT64_HI_OFFSET 0xC4
#define SA5_REPLY_INTR_MASK_OFFSET      0x34
#define SA5_REPLY_PORT_OFFSET           0x44
#define SA5_INTR_STATUS         0x30
#define SA5_SCRATCHPAD_OFFSET   0xB0

#define SA5_CTCFG_OFFSET        0xB4
#define SA5_CTMEM_OFFSET        0xB8

#define SA5_INTR_OFF            0x08
#define SA5B_INTR_OFF           0x04
#define SA5_INTR_PENDING        0x08
#define SA5B_INTR_PENDING       0x04
#define FIFO_EMPTY              0xffffffff
#define HPSA_FIRMWARE_READY     0xffff0000 /* value in scratchpad register */

#define HPSA_ERROR_BIT          0x02

/* Performant mode flags */
#define SA5_PERF_INTR_PENDING   0x04
#define SA5_PERF_INTR_OFF       0x05
#define SA5_OUTDB_STATUS_PERF_BIT       0x01
#define SA5_OUTDB_CLEAR_PERF_BIT        0x01
#define SA5_OUTDB_CLEAR         0xA0
#define SA5_OUTDB_CLEAR_PERF_BIT        0x01
#define SA5_OUTDB_STATUS        0x9C


#define HPSA_INTR_ON    1
#define HPSA_INTR_OFF   0

/*
 * Inbound Post Queue offsets for IO Accelerator Mode 2
 */
#define IOACCEL2_INBOUND_POSTQ_32       0x48
#define IOACCEL2_INBOUND_POSTQ_64_LOW   0xd0
#define IOACCEL2_INBOUND_POSTQ_64_HI    0xd4

#define HPSA_PHYSICAL_DEVICE_BUS        0
#define HPSA_RAID_VOLUME_BUS            1
#define HPSA_EXTERNAL_RAID_VOLUME_BUS   2
#define HPSA_HBA_BUS                    0
#define HPSA_LEGACY_HBA_BUS             3

/*
        Send the command to the hardware
*/
static void SA5_submit_command(struct ctlr_info *h,
        struct CommandList *c)
{
        writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
        (void) readl(h->vaddr + SA5_SCRATCHPAD_OFFSET);
}

static void SA5_submit_command_no_read(struct ctlr_info *h,
        struct CommandList *c)
{
        writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
}

static void SA5_submit_command_ioaccel2(struct ctlr_info *h,
        struct CommandList *c)
{
        writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
}

/*
 *  This card is the opposite of the other cards.
 *   0 turns interrupts on...
 *   0x08 turns them off...
 */
static void SA5_intr_mask(struct ctlr_info *h, unsigned long val)
{
        if (val) { /* Turn interrupts on */
                h->interrupts_enabled = 1;
                writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
                (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
        } else { /* Turn them off */
                h->interrupts_enabled = 0;
                writel(SA5_INTR_OFF,
                        h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
                (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
        }
}

/*
 *  Variant of the above; 0x04 turns interrupts off...
 */
static void SA5B_intr_mask(struct ctlr_info *h, unsigned long val)
{
        if (val) { /* Turn interrupts on */
                h->interrupts_enabled = 1;
                writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
                (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
        } else { /* Turn them off */
                h->interrupts_enabled = 0;
                writel(SA5B_INTR_OFF,
                       h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
                (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
        }
}

static void SA5_performant_intr_mask(struct ctlr_info *h, unsigned long val)
{
        if (val) { /* turn on interrupts */
                h->interrupts_enabled = 1;
                writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
                (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
        } else {
                h->interrupts_enabled = 0;
                writel(SA5_PERF_INTR_OFF,
                        h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
                (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
        }
}

static unsigned long SA5_performant_completed(struct ctlr_info *h, u8 q)
{
        struct reply_queue_buffer *rq = &h->reply_queue[q];
        unsigned long register_value = FIFO_EMPTY;

        /* msi auto clears the interrupt pending bit. */
        if (unlikely(!(h->pdev->msi_enabled || h->msix_vectors))) {
                /* flush the controller write of the reply queue by reading
                 * outbound doorbell status register.
                 */
                (void) readl(h->vaddr + SA5_OUTDB_STATUS);
                writel(SA5_OUTDB_CLEAR_PERF_BIT, h->vaddr + SA5_OUTDB_CLEAR);
                /* Do a read in order to flush the write to the controller
                 * (as per spec.)
                 */
                (void) readl(h->vaddr + SA5_OUTDB_STATUS);
        }

        if ((((u32) rq->head[rq->current_entry]) & 1) == rq->wraparound) {
                register_value = rq->head[rq->current_entry];
                rq->current_entry++;
                atomic_dec(&h->commands_outstanding);
        } else {
                register_value = FIFO_EMPTY;
        }
        /* Check for wraparound */
        if (rq->current_entry == h->max_commands) {
                rq->current_entry = 0;
                rq->wraparound ^= 1;
        }
        return register_value;
}

/*
 *   returns value read from hardware.
 *     returns FIFO_EMPTY if there is nothing to read
 */
static unsigned long SA5_completed(struct ctlr_info *h,
        __attribute__((unused)) u8 q)
{
        unsigned long register_value
                = readl(h->vaddr + SA5_REPLY_PORT_OFFSET);

        if (register_value != FIFO_EMPTY)
                atomic_dec(&h->commands_outstanding);

#ifdef HPSA_DEBUG
        if (register_value != FIFO_EMPTY)
                dev_dbg(&h->pdev->dev, "Read %lx back from board\n",
                        register_value);
        else
                dev_dbg(&h->pdev->dev, "FIFO Empty read\n");
#endif

        return register_value;
}
/*
 *      Returns true if an interrupt is pending..
 */
static bool SA5_intr_pending(struct ctlr_info *h)
{
        unsigned long register_value  =
                readl(h->vaddr + SA5_INTR_STATUS);
        return register_value & SA5_INTR_PENDING;
}

static bool SA5_performant_intr_pending(struct ctlr_info *h)
{
        unsigned long register_value = readl(h->vaddr + SA5_INTR_STATUS);

        if (!register_value)
                return false;

        /* Read outbound doorbell to flush */
        register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
        return register_value & SA5_OUTDB_STATUS_PERF_BIT;
}

#define SA5_IOACCEL_MODE1_INTR_STATUS_CMP_BIT    0x100

static bool SA5_ioaccel_mode1_intr_pending(struct ctlr_info *h)
{
        unsigned long register_value = readl(h->vaddr + SA5_INTR_STATUS);

        return (register_value & SA5_IOACCEL_MODE1_INTR_STATUS_CMP_BIT) ?
                true : false;
}

/*
 *      Returns true if an interrupt is pending..
 */
static bool SA5B_intr_pending(struct ctlr_info *h)
{
        return readl(h->vaddr + SA5_INTR_STATUS) & SA5B_INTR_PENDING;
}

#define IOACCEL_MODE1_REPLY_QUEUE_INDEX  0x1A0
#define IOACCEL_MODE1_PRODUCER_INDEX     0x1B8
#define IOACCEL_MODE1_CONSUMER_INDEX     0x1BC
#define IOACCEL_MODE1_REPLY_UNUSED       0xFFFFFFFFFFFFFFFFULL

static unsigned long SA5_ioaccel_mode1_completed(struct ctlr_info *h, u8 q)
{
        u64 register_value;
        struct reply_queue_buffer *rq = &h->reply_queue[q];

        BUG_ON(q >= h->nreply_queues);

        register_value = rq->head[rq->current_entry];
        if (register_value != IOACCEL_MODE1_REPLY_UNUSED) {
                rq->head[rq->current_entry] = IOACCEL_MODE1_REPLY_UNUSED;
                if (++rq->current_entry == rq->size)
                        rq->current_entry = 0;
                /*
                 * @todo
                 *
                 * Don't really need to write the new index after each command,
                 * but with current driver design this is easiest.
                 */
                wmb();
                writel((q << 24) | rq->current_entry, h->vaddr +
                                IOACCEL_MODE1_CONSUMER_INDEX);
                atomic_dec(&h->commands_outstanding);
        }
        return (unsigned long) register_value;
}

static struct access_method SA5_access = {
        .submit_command =       SA5_submit_command,
        .set_intr_mask =        SA5_intr_mask,
        .intr_pending =         SA5_intr_pending,
        .command_completed =    SA5_completed,
};

/* Duplicate entry of the above to mark unsupported boards */
static struct access_method SA5A_access = {
        .submit_command =       SA5_submit_command,
        .set_intr_mask =        SA5_intr_mask,
        .intr_pending =         SA5_intr_pending,
        .command_completed =    SA5_completed,
};

static struct access_method SA5B_access = {
        .submit_command =       SA5_submit_command,
        .set_intr_mask =        SA5B_intr_mask,
        .intr_pending =         SA5B_intr_pending,
        .command_completed =    SA5_completed,
};

static struct access_method SA5_ioaccel_mode1_access = {
        .submit_command =       SA5_submit_command,
        .set_intr_mask =        SA5_performant_intr_mask,
        .intr_pending =         SA5_ioaccel_mode1_intr_pending,
        .command_completed =    SA5_ioaccel_mode1_completed,
};

static struct access_method SA5_ioaccel_mode2_access = {
        .submit_command =       SA5_submit_command_ioaccel2,
        .set_intr_mask =        SA5_performant_intr_mask,
        .intr_pending =         SA5_performant_intr_pending,
        .command_completed =    SA5_performant_completed,
};

static struct access_method SA5_performant_access = {
        .submit_command =       SA5_submit_command,
        .set_intr_mask =        SA5_performant_intr_mask,
        .intr_pending =         SA5_performant_intr_pending,
        .command_completed =    SA5_performant_completed,
};

static struct access_method SA5_performant_access_no_read = {
        .submit_command =       SA5_submit_command_no_read,
        .set_intr_mask =        SA5_performant_intr_mask,
        .intr_pending =         SA5_performant_intr_pending,
        .command_completed =    SA5_performant_completed,
};

struct board_type {
        u32     board_id;
        char    *product_name;
        struct access_method *access;
};

#endif /* HPSA_H */