linux/drivers/scsi/initio.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-or-later
   2/**************************************************************************
   3 * Initio 9100 device driver for Linux.
   4 *
   5 * Copyright (c) 1994-1998 Initio Corporation
   6 * Copyright (c) 1998 Bas Vermeulen <bvermeul@blackstar.xs4all.nl>
   7 * Copyright (c) 2004 Christoph Hellwig <hch@lst.de>
   8 * Copyright (c) 2007 Red Hat
   9 *
  10 *************************************************************************
  11 *
  12 * DESCRIPTION:
  13 *
  14 * This is the Linux low-level SCSI driver for Initio INI-9X00U/UW SCSI host
  15 * adapters
  16 *
  17 * 08/06/97 hc  - v1.01h
  18 *              - Support inic-940 and inic-935
  19 * 09/26/97 hc  - v1.01i
  20 *              - Make correction from J.W. Schultz suggestion
  21 * 10/13/97 hc  - Support reset function
  22 * 10/21/97 hc  - v1.01j
  23 *              - Support 32 LUN (SCSI 3)
  24 * 01/14/98 hc  - v1.01k
  25 *              - Fix memory allocation problem
  26 * 03/04/98 hc  - v1.01l
  27 *              - Fix tape rewind which will hang the system problem
  28 *              - Set can_queue to initio_num_scb
  29 * 06/25/98 hc  - v1.01m
  30 *              - Get it work for kernel version >= 2.1.75
  31 *              - Dynamic assign SCSI bus reset holding time in initio_init()
  32 * 07/02/98 hc  - v1.01n
  33 *              - Support 0002134A
  34 * 08/07/98 hc  - v1.01o
  35 *              - Change the initio_abort_srb routine to use scsi_done. <01>
  36 * 09/07/98 hl  - v1.02
  37 *              - Change the INI9100U define and proc_dir_entry to
  38 *                reflect the newer Kernel 2.1.118, but the v1.o1o
  39 *                should work with Kernel 2.1.118.
  40 * 09/20/98 wh  - v1.02a
  41 *              - Support Abort command.
  42 *              - Handle reset routine.
  43 * 09/21/98 hl  - v1.03
  44 *              - remove comments.
  45 * 12/09/98 bv  - v1.03a
  46 *              - Removed unused code
  47 * 12/13/98 bv  - v1.03b
  48 *              - Remove cli() locking for kernels >= 2.1.95. This uses
  49 *                spinlocks to serialize access to the pSRB_head and
  50 *                pSRB_tail members of the HCS structure.
  51 * 09/01/99 bv  - v1.03d
  52 *              - Fixed a deadlock problem in SMP.
  53 * 21/01/99 bv  - v1.03e
  54 *              - Add support for the Domex 3192U PCI SCSI
  55 *                This is a slightly modified patch by
  56 *                Brian Macy <bmacy@sunshinecomputing.com>
  57 * 22/02/99 bv  - v1.03f
  58 *              - Didn't detect the INIC-950 in 2.0.x correctly.
  59 *                Now fixed.
  60 * 05/07/99 bv  - v1.03g
  61 *              - Changed the assumption that HZ = 100
  62 * 10/17/03 mc  - v1.04
  63 *              - added new DMA API support
  64 * 06/01/04 jmd - v1.04a
  65 *              - Re-add reset_bus support
  66 **************************************************************************/
  67
  68#include <linux/module.h>
  69#include <linux/errno.h>
  70#include <linux/delay.h>
  71#include <linux/pci.h>
  72#include <linux/init.h>
  73#include <linux/blkdev.h>
  74#include <linux/spinlock.h>
  75#include <linux/stat.h>
  76#include <linux/kernel.h>
  77#include <linux/proc_fs.h>
  78#include <linux/string.h>
  79#include <linux/interrupt.h>
  80#include <linux/ioport.h>
  81#include <linux/slab.h>
  82#include <linux/jiffies.h>
  83#include <linux/dma-mapping.h>
  84#include <asm/io.h>
  85
  86#include <scsi/scsi.h>
  87#include <scsi/scsi_cmnd.h>
  88#include <scsi/scsi_device.h>
  89#include <scsi/scsi_host.h>
  90#include <scsi/scsi_tcq.h>
  91
  92#include "initio.h"
  93
  94#define SENSE_SIZE              14
  95
  96#define i91u_MAXQUEUE           2
  97#define i91u_REVID "Initio INI-9X00U/UW SCSI device driver; Revision: 1.04a"
  98
  99#ifdef DEBUG_i91u
 100static unsigned int i91u_debug = DEBUG_DEFAULT;
 101#endif
 102
 103static int initio_tag_enable = 1;
 104
 105#ifdef DEBUG_i91u
 106static int setup_debug = 0;
 107#endif
 108
 109static void i91uSCBPost(u8 * pHcb, u8 * pScb);
 110
 111#define DEBUG_INTERRUPT 0
 112#define DEBUG_QUEUE     0
 113#define DEBUG_STATE     0
 114#define INT_DISC        0
 115
 116/*--- forward references ---*/
 117static struct scsi_ctrl_blk *initio_find_busy_scb(struct initio_host * host, u16 tarlun);
 118static struct scsi_ctrl_blk *initio_find_done_scb(struct initio_host * host);
 119
 120static int tulip_main(struct initio_host * host);
 121
 122static int initio_next_state(struct initio_host * host);
 123static int initio_state_1(struct initio_host * host);
 124static int initio_state_2(struct initio_host * host);
 125static int initio_state_3(struct initio_host * host);
 126static int initio_state_4(struct initio_host * host);
 127static int initio_state_5(struct initio_host * host);
 128static int initio_state_6(struct initio_host * host);
 129static int initio_state_7(struct initio_host * host);
 130static int initio_xfer_data_in(struct initio_host * host);
 131static int initio_xfer_data_out(struct initio_host * host);
 132static int initio_xpad_in(struct initio_host * host);
 133static int initio_xpad_out(struct initio_host * host);
 134static int initio_status_msg(struct initio_host * host);
 135
 136static int initio_msgin(struct initio_host * host);
 137static int initio_msgin_sync(struct initio_host * host);
 138static int initio_msgin_accept(struct initio_host * host);
 139static int initio_msgout_reject(struct initio_host * host);
 140static int initio_msgin_extend(struct initio_host * host);
 141
 142static int initio_msgout_ide(struct initio_host * host);
 143static int initio_msgout_abort_targ(struct initio_host * host);
 144static int initio_msgout_abort_tag(struct initio_host * host);
 145
 146static int initio_bus_device_reset(struct initio_host * host);
 147static void initio_select_atn(struct initio_host * host, struct scsi_ctrl_blk * scb);
 148static void initio_select_atn3(struct initio_host * host, struct scsi_ctrl_blk * scb);
 149static void initio_select_atn_stop(struct initio_host * host, struct scsi_ctrl_blk * scb);
 150static int int_initio_busfree(struct initio_host * host);
 151static int int_initio_scsi_rst(struct initio_host * host);
 152static int int_initio_bad_seq(struct initio_host * host);
 153static int int_initio_resel(struct initio_host * host);
 154static int initio_sync_done(struct initio_host * host);
 155static int wdtr_done(struct initio_host * host);
 156static int wait_tulip(struct initio_host * host);
 157static int initio_wait_done_disc(struct initio_host * host);
 158static int initio_wait_disc(struct initio_host * host);
 159static void tulip_scsi(struct initio_host * host);
 160static int initio_post_scsi_rst(struct initio_host * host);
 161
 162static void initio_se2_ew_en(unsigned long base);
 163static void initio_se2_ew_ds(unsigned long base);
 164static int initio_se2_rd_all(unsigned long base);
 165static void initio_se2_update_all(unsigned long base);  /* setup default pattern */
 166static void initio_read_eeprom(unsigned long base);
 167
 168/* ---- INTERNAL VARIABLES ---- */
 169
 170static NVRAM i91unvram;
 171static NVRAM *i91unvramp;
 172
 173static u8 i91udftNvRam[64] =
 174{
 175        /*----------- header -----------*/
 176        0x25, 0xc9,             /* Signature    */
 177        0x40,                   /* Size         */
 178        0x01,                   /* Revision     */
 179        /* -- Host Adapter Structure -- */
 180        0x95,                   /* ModelByte0   */
 181        0x00,                   /* ModelByte1   */
 182        0x00,                   /* ModelInfo    */
 183        0x01,                   /* NumOfCh      */
 184        NBC1_DEFAULT,           /* BIOSConfig1  */
 185        0,                      /* BIOSConfig2  */
 186        0,                      /* HAConfig1    */
 187        0,                      /* HAConfig2    */
 188        /* SCSI channel 0 and target Structure  */
 189        7,                      /* SCSIid       */
 190        NCC1_DEFAULT,           /* SCSIconfig1  */
 191        0,                      /* SCSIconfig2  */
 192        0x10,                   /* NumSCSItarget */
 193
 194        NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
 195        NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
 196        NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
 197        NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
 198
 199        /* SCSI channel 1 and target Structure  */
 200        7,                      /* SCSIid       */
 201        NCC1_DEFAULT,           /* SCSIconfig1  */
 202        0,                      /* SCSIconfig2  */
 203        0x10,                   /* NumSCSItarget */
 204
 205        NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
 206        NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
 207        NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
 208        NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
 209        0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 210        0, 0};                  /*      - CheckSum -            */
 211
 212
 213static u8 initio_rate_tbl[8] =  /* fast 20      */
 214{
 215                                /* nanosecond divide by 4 */
 216        12,                     /* 50ns,  20M   */
 217        18,                     /* 75ns,  13.3M */
 218        25,                     /* 100ns, 10M   */
 219        31,                     /* 125ns, 8M    */
 220        37,                     /* 150ns, 6.6M  */
 221        43,                     /* 175ns, 5.7M  */
 222        50,                     /* 200ns, 5M    */
 223        62                      /* 250ns, 4M    */
 224};
 225
 226static void initio_do_pause(unsigned amount)
 227{
 228        /* Pause for amount jiffies */
 229        unsigned long the_time = jiffies + amount;
 230
 231        while (time_before_eq(jiffies, the_time))
 232                cpu_relax();
 233}
 234
 235/*-- forward reference --*/
 236
 237/******************************************************************
 238 Input: instruction for  Serial E2PROM
 239
 240 EX: se2_rd(0 call se2_instr() to send address and read command
 241
 242         StartBit  OP_Code   Address                Data
 243         --------- --------  ------------------     -------
 244         1         1 , 0     A5,A4,A3,A2,A1,A0      D15-D0
 245
 246                 +-----------------------------------------------------
 247                 |
 248 CS -----+
 249                        +--+  +--+  +--+  +--+  +--+
 250                        ^  |  ^  |  ^  |  ^  |  ^  |
 251                        |  |  |  |  |  |  |  |  |  |
 252 CLK -------+  +--+  +--+  +--+  +--+  +--
 253 (leading edge trigger)
 254
 255                 +--1-----1--+
 256                 | SB    OP  |  OP    A5    A4
 257 DI  ----+           +--0------------------
 258 (address and cmd sent to nvram)
 259
 260         -------------------------------------------+
 261                                                                                                |
 262 DO                                             +---
 263 (data sent from nvram)
 264
 265
 266******************************************************************/
 267
 268/**
 269 *      initio_se2_instr        -       bitbang an instruction
 270 *      @base: Base of InitIO controller
 271 *      @instr: Instruction for serial E2PROM
 272 *
 273 *      Bitbang an instruction out to the serial E2Prom
 274 */
 275
 276static void initio_se2_instr(unsigned long base, u8 instr)
 277{
 278        int i;
 279        u8 b;
 280
 281        outb(SE2CS | SE2DO, base + TUL_NVRAM);          /* cs+start bit */
 282        udelay(30);
 283        outb(SE2CS | SE2CLK | SE2DO, base + TUL_NVRAM); /* +CLK */
 284        udelay(30);
 285
 286        for (i = 0; i < 8; i++) {
 287                if (instr & 0x80)
 288                        b = SE2CS | SE2DO;              /* -CLK+dataBit */
 289                else
 290                        b = SE2CS;                      /* -CLK */
 291                outb(b, base + TUL_NVRAM);
 292                udelay(30);
 293                outb(b | SE2CLK, base + TUL_NVRAM);     /* +CLK */
 294                udelay(30);
 295                instr <<= 1;
 296        }
 297        outb(SE2CS, base + TUL_NVRAM);                  /* -CLK */
 298        udelay(30);
 299}
 300
 301
 302/**
 303 *      initio_se2_ew_en        -       Enable erase/write
 304 *      @base: Base address of InitIO controller
 305 *
 306 *      Enable erase/write state of serial EEPROM
 307 */
 308void initio_se2_ew_en(unsigned long base)
 309{
 310        initio_se2_instr(base, 0x30);   /* EWEN */
 311        outb(0, base + TUL_NVRAM);      /* -CS  */
 312        udelay(30);
 313}
 314
 315
 316/**
 317 *      initio_se2_ew_ds        -       Disable erase/write
 318 *      @base: Base address of InitIO controller
 319 *
 320 *      Disable erase/write state of serial EEPROM
 321 */
 322void initio_se2_ew_ds(unsigned long base)
 323{
 324        initio_se2_instr(base, 0);      /* EWDS */
 325        outb(0, base + TUL_NVRAM);      /* -CS  */
 326        udelay(30);
 327}
 328
 329
 330/**
 331 *      initio_se2_rd           -       read E2PROM word
 332 *      @base: Base of InitIO controller
 333 *      @addr: Address of word in E2PROM
 334 *
 335 *      Read a word from the NV E2PROM device
 336 */
 337static u16 initio_se2_rd(unsigned long base, u8 addr)
 338{
 339        u8 instr, rb;
 340        u16 val = 0;
 341        int i;
 342
 343        instr = (u8) (addr | 0x80);
 344        initio_se2_instr(base, instr);  /* READ INSTR */
 345
 346        for (i = 15; i >= 0; i--) {
 347                outb(SE2CS | SE2CLK, base + TUL_NVRAM); /* +CLK */
 348                udelay(30);
 349                outb(SE2CS, base + TUL_NVRAM);          /* -CLK */
 350
 351                /* sample data after the following edge of clock  */
 352                rb = inb(base + TUL_NVRAM);
 353                rb &= SE2DI;
 354                val += (rb << i);
 355                udelay(30);     /* 6/20/95 */
 356        }
 357
 358        outb(0, base + TUL_NVRAM);              /* no chip select */
 359        udelay(30);
 360        return val;
 361}
 362
 363/**
 364 *      initio_se2_wr           -       read E2PROM word
 365 *      @base: Base of InitIO controller
 366 *      @addr: Address of word in E2PROM
 367 *      @val: Value to write
 368 *
 369 *      Write a word to the NV E2PROM device. Used when recovering from
 370 *      a problem with the NV.
 371 */
 372static void initio_se2_wr(unsigned long base, u8 addr, u16 val)
 373{
 374        u8 rb;
 375        u8 instr;
 376        int i;
 377
 378        instr = (u8) (addr | 0x40);
 379        initio_se2_instr(base, instr);  /* WRITE INSTR */
 380        for (i = 15; i >= 0; i--) {
 381                if (val & 0x8000)
 382                        outb(SE2CS | SE2DO, base + TUL_NVRAM);  /* -CLK+dataBit 1 */
 383                else
 384                        outb(SE2CS, base + TUL_NVRAM);          /* -CLK+dataBit 0 */
 385                udelay(30);
 386                outb(SE2CS | SE2CLK, base + TUL_NVRAM);         /* +CLK */
 387                udelay(30);
 388                val <<= 1;
 389        }
 390        outb(SE2CS, base + TUL_NVRAM);                          /* -CLK */
 391        udelay(30);
 392        outb(0, base + TUL_NVRAM);                              /* -CS  */
 393        udelay(30);
 394
 395        outb(SE2CS, base + TUL_NVRAM);                          /* +CS  */
 396        udelay(30);
 397
 398        for (;;) {
 399                outb(SE2CS | SE2CLK, base + TUL_NVRAM);         /* +CLK */
 400                udelay(30);
 401                outb(SE2CS, base + TUL_NVRAM);                  /* -CLK */
 402                udelay(30);
 403                if ((rb = inb(base + TUL_NVRAM)) & SE2DI)
 404                        break;  /* write complete */
 405        }
 406        outb(0, base + TUL_NVRAM);                              /* -CS */
 407}
 408
 409/**
 410 *      initio_se2_rd_all       -       read hostadapter NV configuration
 411 *      @base: Base address of InitIO controller
 412 *
 413 *      Reads the E2PROM data into main memory. Ensures that the checksum
 414 *      and header marker are valid. Returns 1 on success -1 on error.
 415 */
 416
 417static int initio_se2_rd_all(unsigned long base)
 418{
 419        int i;
 420        u16 chksum = 0;
 421        u16 *np;
 422
 423        i91unvramp = &i91unvram;
 424        np = (u16 *) i91unvramp;
 425        for (i = 0; i < 32; i++)
 426                *np++ = initio_se2_rd(base, i);
 427
 428        /* Is signature "ini" ok ? */
 429        if (i91unvramp->NVM_Signature != INI_SIGNATURE)
 430                return -1;
 431        /* Is ckecksum ok ? */
 432        np = (u16 *) i91unvramp;
 433        for (i = 0; i < 31; i++)
 434                chksum += *np++;
 435        if (i91unvramp->NVM_CheckSum != chksum)
 436                return -1;
 437        return 1;
 438}
 439
 440/**
 441 *      initio_se2_update_all           -       Update E2PROM
 442 *      @base: Base of InitIO controller
 443 *
 444 *      Update the E2PROM by wrting any changes into the E2PROM
 445 *      chip, rewriting the checksum.
 446 */
 447static void initio_se2_update_all(unsigned long base)
 448{                               /* setup default pattern */
 449        int i;
 450        u16 chksum = 0;
 451        u16 *np, *np1;
 452
 453        i91unvramp = &i91unvram;
 454        /* Calculate checksum first */
 455        np = (u16 *) i91udftNvRam;
 456        for (i = 0; i < 31; i++)
 457                chksum += *np++;
 458        *np = chksum;
 459        initio_se2_ew_en(base); /* Enable write  */
 460
 461        np = (u16 *) i91udftNvRam;
 462        np1 = (u16 *) i91unvramp;
 463        for (i = 0; i < 32; i++, np++, np1++) {
 464                if (*np != *np1)
 465                        initio_se2_wr(base, i, *np);
 466        }
 467        initio_se2_ew_ds(base); /* Disable write   */
 468}
 469
 470/**
 471 *      initio_read_eeprom              -       Retrieve configuration
 472 *      @base: Base of InitIO Host Adapter
 473 *
 474 *      Retrieve the host adapter configuration data from E2Prom. If the
 475 *      data is invalid then the defaults are used and are also restored
 476 *      into the E2PROM. This forms the access point for the SCSI driver
 477 *      into the E2PROM layer, the other functions for the E2PROM are all
 478 *      internal use.
 479 *
 480 *      Must be called single threaded, uses a shared global area.
 481 */
 482
 483static void initio_read_eeprom(unsigned long base)
 484{
 485        u8 gctrl;
 486
 487        i91unvramp = &i91unvram;
 488        /* Enable EEProm programming */
 489        gctrl = inb(base + TUL_GCTRL);
 490        outb(gctrl | TUL_GCTRL_EEPROM_BIT, base + TUL_GCTRL);
 491        if (initio_se2_rd_all(base) != 1) {
 492                initio_se2_update_all(base);    /* setup default pattern */
 493                initio_se2_rd_all(base);        /* load again  */
 494        }
 495        /* Disable EEProm programming */
 496        gctrl = inb(base + TUL_GCTRL);
 497        outb(gctrl & ~TUL_GCTRL_EEPROM_BIT, base + TUL_GCTRL);
 498}
 499
 500/**
 501 *      initio_stop_bm          -       stop bus master
 502 *      @host: InitIO we are stopping
 503 *
 504 *      Stop any pending DMA operation, aborting the DMA if necessary
 505 */
 506
 507static void initio_stop_bm(struct initio_host * host)
 508{
 509
 510        if (inb(host->addr + TUL_XStatus) & XPEND) {    /* if DMA xfer is pending, abort DMA xfer */
 511                outb(TAX_X_ABT | TAX_X_CLR_FIFO, host->addr + TUL_XCmd);
 512                /* wait Abort DMA xfer done */
 513                while ((inb(host->addr + TUL_Int) & XABT) == 0)
 514                        cpu_relax();
 515        }
 516        outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
 517}
 518
 519/**
 520 *      initio_reset_scsi               -       Reset SCSI host controller
 521 *      @host: InitIO host to reset
 522 *      @seconds: Recovery time
 523 *
 524 *      Perform a full reset of the SCSI subsystem.
 525 */
 526
 527static int initio_reset_scsi(struct initio_host * host, int seconds)
 528{
 529        outb(TSC_RST_BUS, host->addr + TUL_SCtrl0);
 530
 531        while (!((host->jsint = inb(host->addr + TUL_SInt)) & TSS_SCSIRST_INT))
 532                cpu_relax();
 533
 534        /* reset tulip chip */
 535        outb(0, host->addr + TUL_SSignal);
 536
 537        /* Stall for a while, wait for target's firmware ready,make it 2 sec ! */
 538        /* SONY 5200 tape drive won't work if only stall for 1 sec */
 539        /* FIXME: this is a very long busy wait right now */
 540        initio_do_pause(seconds * HZ);
 541
 542        inb(host->addr + TUL_SInt);
 543        return SCSI_RESET_SUCCESS;
 544}
 545
 546/**
 547 *      initio_init             -       set up an InitIO host adapter
 548 *      @host: InitIO host adapter
 549 *      @num_scbs: Number of SCBS
 550 *      @bios_addr: BIOS address
 551 *
 552 *      Set up the host adapter and devices according to the configuration
 553 *      retrieved from the E2PROM.
 554 *
 555 *      Locking: Calls E2PROM layer code which is not re-enterable so must
 556 *      run single threaded for now.
 557 */
 558
 559static void initio_init(struct initio_host * host, u8 *bios_addr)
 560{
 561        int i;
 562        u8 *flags;
 563        u8 *heads;
 564
 565        /* Get E2Prom configuration */
 566        initio_read_eeprom(host->addr);
 567        if (i91unvramp->NVM_SCSIInfo[0].NVM_NumOfTarg == 8)
 568                host->max_tar = 8;
 569        else
 570                host->max_tar = 16;
 571
 572        host->config = i91unvramp->NVM_SCSIInfo[0].NVM_ChConfig1;
 573
 574        host->scsi_id = i91unvramp->NVM_SCSIInfo[0].NVM_ChSCSIID;
 575        host->idmask = ~(1 << host->scsi_id);
 576
 577#ifdef CHK_PARITY
 578        /* Enable parity error response */
 579        outb(inb(host->addr + TUL_PCMD) | 0x40, host->addr + TUL_PCMD);
 580#endif
 581
 582        /* Mask all the interrupt       */
 583        outb(0x1F, host->addr + TUL_Mask);
 584
 585        initio_stop_bm(host);
 586        /* --- Initialize the tulip --- */
 587        outb(TSC_RST_CHIP, host->addr + TUL_SCtrl0);
 588
 589        /* program HBA's SCSI ID        */
 590        outb(host->scsi_id << 4, host->addr + TUL_SScsiId);
 591
 592        /* Enable Initiator Mode ,phase latch,alternate sync period mode,
 593           disable SCSI reset */
 594        if (host->config & HCC_EN_PAR)
 595                host->sconf1 = (TSC_INITDEFAULT | TSC_EN_SCSI_PAR);
 596        else
 597                host->sconf1 = (TSC_INITDEFAULT);
 598        outb(host->sconf1, host->addr + TUL_SConfig);
 599
 600        /* Enable HW reselect */
 601        outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1);
 602
 603        outb(0, host->addr + TUL_SPeriod);
 604
 605        /* selection time out = 250 ms */
 606        outb(153, host->addr + TUL_STimeOut);
 607
 608        /* Enable SCSI terminator */
 609        outb((host->config & (HCC_ACT_TERM1 | HCC_ACT_TERM2)),
 610                host->addr + TUL_XCtrl);
 611        outb(((host->config & HCC_AUTO_TERM) >> 4) |
 612                (inb(host->addr + TUL_GCTRL1) & 0xFE),
 613                host->addr + TUL_GCTRL1);
 614
 615        for (i = 0,
 616             flags = & (i91unvramp->NVM_SCSIInfo[0].NVM_Targ0Config),
 617             heads = bios_addr + 0x180;
 618             i < host->max_tar;
 619             i++, flags++) {
 620                host->targets[i].flags = *flags & ~(TCF_SYNC_DONE | TCF_WDTR_DONE);
 621                if (host->targets[i].flags & TCF_EN_255)
 622                        host->targets[i].drv_flags = TCF_DRV_255_63;
 623                else
 624                        host->targets[i].drv_flags = 0;
 625                host->targets[i].js_period = 0;
 626                host->targets[i].sconfig0 = host->sconf1;
 627                host->targets[i].heads = *heads++;
 628                if (host->targets[i].heads == 255)
 629                        host->targets[i].drv_flags = TCF_DRV_255_63;
 630                else
 631                        host->targets[i].drv_flags = 0;
 632                host->targets[i].sectors = *heads++;
 633                host->targets[i].flags &= ~TCF_BUSY;
 634                host->act_tags[i] = 0;
 635                host->max_tags[i] = 0xFF;
 636        }                       /* for                          */
 637        printk("i91u: PCI Base=0x%04X, IRQ=%d, BIOS=0x%04X0, SCSI ID=%d\n",
 638               host->addr, host->pci_dev->irq,
 639               host->bios_addr, host->scsi_id);
 640        /* Reset SCSI Bus */
 641        if (host->config & HCC_SCSI_RESET) {
 642                printk(KERN_INFO "i91u: Reset SCSI Bus ... \n");
 643                initio_reset_scsi(host, 10);
 644        }
 645        outb(0x17, host->addr + TUL_SCFG1);
 646        outb(0xE9, host->addr + TUL_SIntEnable);
 647}
 648
 649/**
 650 *      initio_alloc_scb                -       Allocate an SCB
 651 *      @host: InitIO host we are allocating for
 652 *
 653 *      Walk the SCB list for the controller and allocate a free SCB if
 654 *      one exists.
 655 */
 656static struct scsi_ctrl_blk *initio_alloc_scb(struct initio_host *host)
 657{
 658        struct scsi_ctrl_blk *scb;
 659        unsigned long flags;
 660
 661        spin_lock_irqsave(&host->avail_lock, flags);
 662        if ((scb = host->first_avail) != NULL) {
 663#if DEBUG_QUEUE
 664                printk("find scb at %p\n", scb);
 665#endif
 666                if ((host->first_avail = scb->next) == NULL)
 667                        host->last_avail = NULL;
 668                scb->next = NULL;
 669                scb->status = SCB_RENT;
 670        }
 671        spin_unlock_irqrestore(&host->avail_lock, flags);
 672        return scb;
 673}
 674
 675/**
 676 *      initio_release_scb              -       Release an SCB
 677 *      @host: InitIO host that owns the SCB
 678 *      @cmnd: SCB command block being returned
 679 *
 680 *      Return an allocated SCB to the host free list
 681 */
 682
 683static void initio_release_scb(struct initio_host * host, struct scsi_ctrl_blk * cmnd)
 684{
 685        unsigned long flags;
 686
 687#if DEBUG_QUEUE
 688        printk("Release SCB %p; ", cmnd);
 689#endif
 690        spin_lock_irqsave(&(host->avail_lock), flags);
 691        cmnd->srb = NULL;
 692        cmnd->status = 0;
 693        cmnd->next = NULL;
 694        if (host->last_avail != NULL) {
 695                host->last_avail->next = cmnd;
 696                host->last_avail = cmnd;
 697        } else {
 698                host->first_avail = cmnd;
 699                host->last_avail = cmnd;
 700        }
 701        spin_unlock_irqrestore(&(host->avail_lock), flags);
 702}
 703
 704/***************************************************************************/
 705static void initio_append_pend_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp)
 706{
 707
 708#if DEBUG_QUEUE
 709        printk("Append pend SCB %p; ", scbp);
 710#endif
 711        scbp->status = SCB_PEND;
 712        scbp->next = NULL;
 713        if (host->last_pending != NULL) {
 714                host->last_pending->next = scbp;
 715                host->last_pending = scbp;
 716        } else {
 717                host->first_pending = scbp;
 718                host->last_pending = scbp;
 719        }
 720}
 721
 722/***************************************************************************/
 723static void initio_push_pend_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp)
 724{
 725
 726#if DEBUG_QUEUE
 727        printk("Push pend SCB %p; ", scbp);
 728#endif
 729        scbp->status = SCB_PEND;
 730        if ((scbp->next = host->first_pending) != NULL) {
 731                host->first_pending = scbp;
 732        } else {
 733                host->first_pending = scbp;
 734                host->last_pending = scbp;
 735        }
 736}
 737
 738static struct scsi_ctrl_blk *initio_find_first_pend_scb(struct initio_host * host)
 739{
 740        struct scsi_ctrl_blk *first;
 741
 742
 743        first = host->first_pending;
 744        while (first != NULL) {
 745                if (first->opcode != ExecSCSI)
 746                        return first;
 747                if (first->tagmsg == 0) {
 748                        if ((host->act_tags[first->target] == 0) &&
 749                            !(host->targets[first->target].flags & TCF_BUSY))
 750                                return first;
 751                } else {
 752                        if ((host->act_tags[first->target] >=
 753                          host->max_tags[first->target]) |
 754                            (host->targets[first->target].flags & TCF_BUSY)) {
 755                                first = first->next;
 756                                continue;
 757                        }
 758                        return first;
 759                }
 760                first = first->next;
 761        }
 762        return first;
 763}
 764
 765static void initio_unlink_pend_scb(struct initio_host * host, struct scsi_ctrl_blk * scb)
 766{
 767        struct scsi_ctrl_blk *tmp, *prev;
 768
 769#if DEBUG_QUEUE
 770        printk("unlink pend SCB %p; ", scb);
 771#endif
 772
 773        prev = tmp = host->first_pending;
 774        while (tmp != NULL) {
 775                if (scb == tmp) {       /* Unlink this SCB              */
 776                        if (tmp == host->first_pending) {
 777                                if ((host->first_pending = tmp->next) == NULL)
 778                                        host->last_pending = NULL;
 779                        } else {
 780                                prev->next = tmp->next;
 781                                if (tmp == host->last_pending)
 782                                        host->last_pending = prev;
 783                        }
 784                        tmp->next = NULL;
 785                        break;
 786                }
 787                prev = tmp;
 788                tmp = tmp->next;
 789        }
 790}
 791
 792static void initio_append_busy_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp)
 793{
 794
 795#if DEBUG_QUEUE
 796        printk("append busy SCB %p; ", scbp);
 797#endif
 798        if (scbp->tagmsg)
 799                host->act_tags[scbp->target]++;
 800        else
 801                host->targets[scbp->target].flags |= TCF_BUSY;
 802        scbp->status = SCB_BUSY;
 803        scbp->next = NULL;
 804        if (host->last_busy != NULL) {
 805                host->last_busy->next = scbp;
 806                host->last_busy = scbp;
 807        } else {
 808                host->first_busy = scbp;
 809                host->last_busy = scbp;
 810        }
 811}
 812
 813/***************************************************************************/
 814static struct scsi_ctrl_blk *initio_pop_busy_scb(struct initio_host * host)
 815{
 816        struct scsi_ctrl_blk *tmp;
 817
 818
 819        if ((tmp = host->first_busy) != NULL) {
 820                if ((host->first_busy = tmp->next) == NULL)
 821                        host->last_busy = NULL;
 822                tmp->next = NULL;
 823                if (tmp->tagmsg)
 824                        host->act_tags[tmp->target]--;
 825                else
 826                        host->targets[tmp->target].flags &= ~TCF_BUSY;
 827        }
 828#if DEBUG_QUEUE
 829        printk("Pop busy SCB %p; ", tmp);
 830#endif
 831        return tmp;
 832}
 833
 834/***************************************************************************/
 835static void initio_unlink_busy_scb(struct initio_host * host, struct scsi_ctrl_blk * scb)
 836{
 837        struct scsi_ctrl_blk *tmp, *prev;
 838
 839#if DEBUG_QUEUE
 840        printk("unlink busy SCB %p; ", scb);
 841#endif
 842
 843        prev = tmp = host->first_busy;
 844        while (tmp != NULL) {
 845                if (scb == tmp) {       /* Unlink this SCB              */
 846                        if (tmp == host->first_busy) {
 847                                if ((host->first_busy = tmp->next) == NULL)
 848                                        host->last_busy = NULL;
 849                        } else {
 850                                prev->next = tmp->next;
 851                                if (tmp == host->last_busy)
 852                                        host->last_busy = prev;
 853                        }
 854                        tmp->next = NULL;
 855                        if (tmp->tagmsg)
 856                                host->act_tags[tmp->target]--;
 857                        else
 858                                host->targets[tmp->target].flags &= ~TCF_BUSY;
 859                        break;
 860                }
 861                prev = tmp;
 862                tmp = tmp->next;
 863        }
 864        return;
 865}
 866
 867struct scsi_ctrl_blk *initio_find_busy_scb(struct initio_host * host, u16 tarlun)
 868{
 869        struct scsi_ctrl_blk *tmp, *prev;
 870        u16 scbp_tarlun;
 871
 872
 873        prev = tmp = host->first_busy;
 874        while (tmp != NULL) {
 875                scbp_tarlun = (tmp->lun << 8) | (tmp->target);
 876                if (scbp_tarlun == tarlun) {    /* Unlink this SCB              */
 877                        break;
 878                }
 879                prev = tmp;
 880                tmp = tmp->next;
 881        }
 882#if DEBUG_QUEUE
 883        printk("find busy SCB %p; ", tmp);
 884#endif
 885        return tmp;
 886}
 887
 888static void initio_append_done_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp)
 889{
 890#if DEBUG_QUEUE
 891        printk("append done SCB %p; ", scbp);
 892#endif
 893
 894        scbp->status = SCB_DONE;
 895        scbp->next = NULL;
 896        if (host->last_done != NULL) {
 897                host->last_done->next = scbp;
 898                host->last_done = scbp;
 899        } else {
 900                host->first_done = scbp;
 901                host->last_done = scbp;
 902        }
 903}
 904
 905struct scsi_ctrl_blk *initio_find_done_scb(struct initio_host * host)
 906{
 907        struct scsi_ctrl_blk *tmp;
 908
 909        if ((tmp = host->first_done) != NULL) {
 910                if ((host->first_done = tmp->next) == NULL)
 911                        host->last_done = NULL;
 912                tmp->next = NULL;
 913        }
 914#if DEBUG_QUEUE
 915        printk("find done SCB %p; ",tmp);
 916#endif
 917        return tmp;
 918}
 919
 920static int initio_abort_srb(struct initio_host * host, struct scsi_cmnd *srbp)
 921{
 922        unsigned long flags;
 923        struct scsi_ctrl_blk *tmp, *prev;
 924
 925        spin_lock_irqsave(&host->semaph_lock, flags);
 926
 927        if ((host->semaph == 0) && (host->active == NULL)) {
 928                /* disable Jasmin SCSI Int        */
 929                outb(0x1F, host->addr + TUL_Mask);
 930                spin_unlock_irqrestore(&host->semaph_lock, flags);
 931                /* FIXME: synchronize_irq needed ? */
 932                tulip_main(host);
 933                spin_lock_irqsave(&host->semaph_lock, flags);
 934                host->semaph = 1;
 935                outb(0x0F, host->addr + TUL_Mask);
 936                spin_unlock_irqrestore(&host->semaph_lock, flags);
 937                return SCSI_ABORT_SNOOZE;
 938        }
 939        prev = tmp = host->first_pending;       /* Check Pend queue */
 940        while (tmp != NULL) {
 941                /* 07/27/98 */
 942                if (tmp->srb == srbp) {
 943                        if (tmp == host->active) {
 944                                spin_unlock_irqrestore(&host->semaph_lock, flags);
 945                                return SCSI_ABORT_BUSY;
 946                        } else if (tmp == host->first_pending) {
 947                                if ((host->first_pending = tmp->next) == NULL)
 948                                        host->last_pending = NULL;
 949                        } else {
 950                                prev->next = tmp->next;
 951                                if (tmp == host->last_pending)
 952                                        host->last_pending = prev;
 953                        }
 954                        tmp->hastat = HOST_ABORTED;
 955                        tmp->flags |= SCF_DONE;
 956                        if (tmp->flags & SCF_POST)
 957                                (*tmp->post) ((u8 *) host, (u8 *) tmp);
 958                        spin_unlock_irqrestore(&host->semaph_lock, flags);
 959                        return SCSI_ABORT_SUCCESS;
 960                }
 961                prev = tmp;
 962                tmp = tmp->next;
 963        }
 964
 965        prev = tmp = host->first_busy;  /* Check Busy queue */
 966        while (tmp != NULL) {
 967                if (tmp->srb == srbp) {
 968                        if (tmp == host->active) {
 969                                spin_unlock_irqrestore(&host->semaph_lock, flags);
 970                                return SCSI_ABORT_BUSY;
 971                        } else if (tmp->tagmsg == 0) {
 972                                spin_unlock_irqrestore(&host->semaph_lock, flags);
 973                                return SCSI_ABORT_BUSY;
 974                        } else {
 975                                host->act_tags[tmp->target]--;
 976                                if (tmp == host->first_busy) {
 977                                        if ((host->first_busy = tmp->next) == NULL)
 978                                                host->last_busy = NULL;
 979                                } else {
 980                                        prev->next = tmp->next;
 981                                        if (tmp == host->last_busy)
 982                                                host->last_busy = prev;
 983                                }
 984                                tmp->next = NULL;
 985
 986
 987                                tmp->hastat = HOST_ABORTED;
 988                                tmp->flags |= SCF_DONE;
 989                                if (tmp->flags & SCF_POST)
 990                                        (*tmp->post) ((u8 *) host, (u8 *) tmp);
 991                                spin_unlock_irqrestore(&host->semaph_lock, flags);
 992                                return SCSI_ABORT_SUCCESS;
 993                        }
 994                }
 995                prev = tmp;
 996                tmp = tmp->next;
 997        }
 998        spin_unlock_irqrestore(&host->semaph_lock, flags);
 999        return SCSI_ABORT_NOT_RUNNING;
1000}
1001
1002/***************************************************************************/
1003static int initio_bad_seq(struct initio_host * host)
1004{
1005        struct scsi_ctrl_blk *scb;
1006
1007        printk("initio_bad_seg c=%d\n", host->index);
1008
1009        if ((scb = host->active) != NULL) {
1010                initio_unlink_busy_scb(host, scb);
1011                scb->hastat = HOST_BAD_PHAS;
1012                scb->tastat = 0;
1013                initio_append_done_scb(host, scb);
1014        }
1015        initio_stop_bm(host);
1016        initio_reset_scsi(host, 8);     /* 7/29/98 */
1017        return initio_post_scsi_rst(host);
1018}
1019
1020
1021/************************************************************************/
1022static void initio_exec_scb(struct initio_host * host, struct scsi_ctrl_blk * scb)
1023{
1024        unsigned long flags;
1025
1026        scb->mode = 0;
1027
1028        scb->sgidx = 0;
1029        scb->sgmax = scb->sglen;
1030
1031        spin_lock_irqsave(&host->semaph_lock, flags);
1032
1033        initio_append_pend_scb(host, scb);      /* Append this SCB to Pending queue */
1034
1035/* VVVVV 07/21/98 */
1036        if (host->semaph == 1) {
1037                /* Disable Jasmin SCSI Int */
1038                outb(0x1F, host->addr + TUL_Mask);
1039                host->semaph = 0;
1040                spin_unlock_irqrestore(&host->semaph_lock, flags);
1041
1042                tulip_main(host);
1043
1044                spin_lock_irqsave(&host->semaph_lock, flags);
1045                host->semaph = 1;
1046                outb(0x0F, host->addr + TUL_Mask);
1047        }
1048        spin_unlock_irqrestore(&host->semaph_lock, flags);
1049        return;
1050}
1051
1052/***************************************************************************/
1053static int initio_isr(struct initio_host * host)
1054{
1055        if (inb(host->addr + TUL_Int) & TSS_INT_PENDING) {
1056                if (host->semaph == 1) {
1057                        outb(0x1F, host->addr + TUL_Mask);
1058                        /* Disable Tulip SCSI Int */
1059                        host->semaph = 0;
1060
1061                        tulip_main(host);
1062
1063                        host->semaph = 1;
1064                        outb(0x0F, host->addr + TUL_Mask);
1065                        return 1;
1066                }
1067        }
1068        return 0;
1069}
1070
1071static int tulip_main(struct initio_host * host)
1072{
1073        struct scsi_ctrl_blk *scb;
1074
1075        for (;;) {
1076                tulip_scsi(host);       /* Call tulip_scsi              */
1077
1078                /* Walk the list of completed SCBs */
1079                while ((scb = initio_find_done_scb(host)) != NULL) {    /* find done entry */
1080                        if (scb->tastat == INI_QUEUE_FULL) {
1081                                host->max_tags[scb->target] =
1082                                    host->act_tags[scb->target] - 1;
1083                                scb->tastat = 0;
1084                                initio_append_pend_scb(host, scb);
1085                                continue;
1086                        }
1087                        if (!(scb->mode & SCM_RSENS)) {         /* not in auto req. sense mode */
1088                                if (scb->tastat == 2) {
1089
1090                                        /* clr sync. nego flag */
1091
1092                                        if (scb->flags & SCF_SENSE) {
1093                                                u8 len;
1094                                                len = scb->senselen;
1095                                                if (len == 0)
1096                                                        len = 1;
1097                                                scb->buflen = scb->senselen;
1098                                                scb->bufptr = scb->senseptr;
1099                                                scb->flags &= ~(SCF_SG | SCF_DIR);      /* for xfer_data_in */
1100                                                /* so, we won't report wrong direction in xfer_data_in,
1101                                                   and won't report HOST_DO_DU in state_6 */
1102                                                scb->mode = SCM_RSENS;
1103                                                scb->ident &= 0xBF;     /* Disable Disconnect */
1104                                                scb->tagmsg = 0;
1105                                                scb->tastat = 0;
1106                                                scb->cdblen = 6;
1107                                                scb->cdb[0] = SCSICMD_RequestSense;
1108                                                scb->cdb[1] = 0;
1109                                                scb->cdb[2] = 0;
1110                                                scb->cdb[3] = 0;
1111                                                scb->cdb[4] = len;
1112                                                scb->cdb[5] = 0;
1113                                                initio_push_pend_scb(host, scb);
1114                                                break;
1115                                        }
1116                                }
1117                        } else {        /* in request sense mode */
1118
1119                                if (scb->tastat == 2) {         /* check contition status again after sending
1120                                                                           requset sense cmd 0x3 */
1121                                        scb->hastat = HOST_BAD_PHAS;
1122                                }
1123                                scb->tastat = 2;
1124                        }
1125                        scb->flags |= SCF_DONE;
1126                        if (scb->flags & SCF_POST) {
1127                                /* FIXME: only one post method and lose casts */
1128                                (*scb->post) ((u8 *) host, (u8 *) scb);
1129                        }
1130                }               /* while */
1131                /* find_active: */
1132                if (inb(host->addr + TUL_SStatus0) & TSS_INT_PENDING)
1133                        continue;
1134                if (host->active)       /* return to OS and wait for xfer_done_ISR/Selected_ISR */
1135                        return 1;       /* return to OS, enable interrupt */
1136                /* Check pending SCB            */
1137                if (initio_find_first_pend_scb(host) == NULL)
1138                        return 1;       /* return to OS, enable interrupt */
1139        }                       /* End of for loop */
1140        /* statement won't reach here */
1141}
1142
1143static void tulip_scsi(struct initio_host * host)
1144{
1145        struct scsi_ctrl_blk *scb;
1146        struct target_control *active_tc;
1147
1148        /* make sure to service interrupt asap */
1149        if ((host->jsstatus0 = inb(host->addr + TUL_SStatus0)) & TSS_INT_PENDING) {
1150                host->phase = host->jsstatus0 & TSS_PH_MASK;
1151                host->jsstatus1 = inb(host->addr + TUL_SStatus1);
1152                host->jsint = inb(host->addr + TUL_SInt);
1153                if (host->jsint & TSS_SCSIRST_INT) {    /* SCSI bus reset detected      */
1154                        int_initio_scsi_rst(host);
1155                        return;
1156                }
1157                if (host->jsint & TSS_RESEL_INT) {      /* if selected/reselected interrupt */
1158                        if (int_initio_resel(host) == 0)
1159                                initio_next_state(host);
1160                        return;
1161                }
1162                if (host->jsint & TSS_SEL_TIMEOUT) {
1163                        int_initio_busfree(host);
1164                        return;
1165                }
1166                if (host->jsint & TSS_DISC_INT) {       /* BUS disconnection            */
1167                        int_initio_busfree(host);       /* unexpected bus free or sel timeout */
1168                        return;
1169                }
1170                if (host->jsint & (TSS_FUNC_COMP | TSS_BUS_SERV)) {     /* func complete or Bus service */
1171                        if ((scb = host->active) != NULL)
1172                                initio_next_state(host);
1173                        return;
1174                }
1175        }
1176        if (host->active != NULL)
1177                return;
1178
1179        if ((scb = initio_find_first_pend_scb(host)) == NULL)
1180                return;
1181
1182        /* program HBA's SCSI ID & target SCSI ID */
1183        outb((host->scsi_id << 4) | (scb->target & 0x0F),
1184                host->addr + TUL_SScsiId);
1185        if (scb->opcode == ExecSCSI) {
1186                active_tc = &host->targets[scb->target];
1187
1188                if (scb->tagmsg)
1189                        active_tc->drv_flags |= TCF_DRV_EN_TAG;
1190                else
1191                        active_tc->drv_flags &= ~TCF_DRV_EN_TAG;
1192
1193                outb(active_tc->js_period, host->addr + TUL_SPeriod);
1194                if ((active_tc->flags & (TCF_WDTR_DONE | TCF_NO_WDTR)) == 0) {  /* do wdtr negotiation          */
1195                        initio_select_atn_stop(host, scb);
1196                } else {
1197                        if ((active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0) {     /* do sync negotiation          */
1198                                initio_select_atn_stop(host, scb);
1199                        } else {
1200                                if (scb->tagmsg)
1201                                        initio_select_atn3(host, scb);
1202                                else
1203                                        initio_select_atn(host, scb);
1204                        }
1205                }
1206                if (scb->flags & SCF_POLL) {
1207                        while (wait_tulip(host) != -1) {
1208                                if (initio_next_state(host) == -1)
1209                                        break;
1210                        }
1211                }
1212        } else if (scb->opcode == BusDevRst) {
1213                initio_select_atn_stop(host, scb);
1214                scb->next_state = 8;
1215                if (scb->flags & SCF_POLL) {
1216                        while (wait_tulip(host) != -1) {
1217                                if (initio_next_state(host) == -1)
1218                                        break;
1219                        }
1220                }
1221        } else if (scb->opcode == AbortCmd) {
1222                if (initio_abort_srb(host, scb->srb) != 0) {
1223                        initio_unlink_pend_scb(host, scb);
1224                        initio_release_scb(host, scb);
1225                } else {
1226                        scb->opcode = BusDevRst;
1227                        initio_select_atn_stop(host, scb);
1228                        scb->next_state = 8;
1229                }
1230        } else {
1231                initio_unlink_pend_scb(host, scb);
1232                scb->hastat = 0x16;     /* bad command */
1233                initio_append_done_scb(host, scb);
1234        }
1235        return;
1236}
1237
1238/**
1239 *      initio_next_state               -       Next SCSI state
1240 *      @host: InitIO host we are processing
1241 *
1242 *      Progress the active command block along the state machine
1243 *      until we hit a state which we must wait for activity to occur.
1244 *
1245 *      Returns zero or a negative code.
1246 */
1247
1248static int initio_next_state(struct initio_host * host)
1249{
1250        int next;
1251
1252        next = host->active->next_state;
1253        for (;;) {
1254                switch (next) {
1255                case 1:
1256                        next = initio_state_1(host);
1257                        break;
1258                case 2:
1259                        next = initio_state_2(host);
1260                        break;
1261                case 3:
1262                        next = initio_state_3(host);
1263                        break;
1264                case 4:
1265                        next = initio_state_4(host);
1266                        break;
1267                case 5:
1268                        next = initio_state_5(host);
1269                        break;
1270                case 6:
1271                        next = initio_state_6(host);
1272                        break;
1273                case 7:
1274                        next = initio_state_7(host);
1275                        break;
1276                case 8:
1277                        return initio_bus_device_reset(host);
1278                default:
1279                        return initio_bad_seq(host);
1280                }
1281                if (next <= 0)
1282                        return next;
1283        }
1284}
1285
1286
1287/**
1288 *      initio_state_1          -       SCSI state machine
1289 *      @host: InitIO host we are controlling
1290 *
1291 *      Perform SCSI state processing for Select/Attention/Stop
1292 */
1293
1294static int initio_state_1(struct initio_host * host)
1295{
1296        struct scsi_ctrl_blk *scb = host->active;
1297        struct target_control *active_tc = host->active_tc;
1298#if DEBUG_STATE
1299        printk("-s1-");
1300#endif
1301
1302        /* Move the SCB from pending to busy */
1303        initio_unlink_pend_scb(host, scb);
1304        initio_append_busy_scb(host, scb);
1305
1306        outb(active_tc->sconfig0, host->addr + TUL_SConfig );
1307        /* ATN on */
1308        if (host->phase == MSG_OUT) {
1309                outb(TSC_EN_BUS_IN | TSC_HW_RESELECT, host->addr + TUL_SCtrl1);
1310                outb(scb->ident, host->addr + TUL_SFifo);
1311
1312                if (scb->tagmsg) {
1313                        outb(scb->tagmsg, host->addr + TUL_SFifo);
1314                        outb(scb->tagid, host->addr + TUL_SFifo);
1315                }
1316                if ((active_tc->flags & (TCF_WDTR_DONE | TCF_NO_WDTR)) == 0) {
1317                        active_tc->flags |= TCF_WDTR_DONE;
1318                        outb(MSG_EXTEND, host->addr + TUL_SFifo);
1319                        outb(2, host->addr + TUL_SFifo);        /* Extended msg length */
1320                        outb(3, host->addr + TUL_SFifo);        /* Sync request */
1321                        outb(1, host->addr + TUL_SFifo);        /* Start from 16 bits */
1322                } else if ((active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0) {
1323                        active_tc->flags |= TCF_SYNC_DONE;
1324                        outb(MSG_EXTEND, host->addr + TUL_SFifo);
1325                        outb(3, host->addr + TUL_SFifo);        /* extended msg length */
1326                        outb(1, host->addr + TUL_SFifo);        /* sync request */
1327                        outb(initio_rate_tbl[active_tc->flags & TCF_SCSI_RATE], host->addr + TUL_SFifo);
1328                        outb(MAX_OFFSET, host->addr + TUL_SFifo);       /* REQ/ACK offset */
1329                }
1330                outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1331                if (wait_tulip(host) == -1)
1332                        return -1;
1333        }
1334        outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1335        outb((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)), host->addr + TUL_SSignal);
1336        /* Into before CDB xfer */
1337        return 3;
1338}
1339
1340
1341/**
1342 *      initio_state_2          -       SCSI state machine
1343 *      @host: InitIO host we are controlling
1344 *
1345 * state after selection with attention
1346 * state after selection with attention3
1347 */
1348
1349static int initio_state_2(struct initio_host * host)
1350{
1351        struct scsi_ctrl_blk *scb = host->active;
1352        struct target_control *active_tc = host->active_tc;
1353#if DEBUG_STATE
1354        printk("-s2-");
1355#endif
1356
1357        initio_unlink_pend_scb(host, scb);
1358        initio_append_busy_scb(host, scb);
1359
1360        outb(active_tc->sconfig0, host->addr + TUL_SConfig);
1361
1362        if (host->jsstatus1 & TSS_CMD_PH_CMP)
1363                return 4;
1364
1365        outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1366        outb((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)), host->addr + TUL_SSignal);
1367        /* Into before CDB xfer */
1368        return 3;
1369}
1370
1371/**
1372 *      initio_state_3          -       SCSI state machine
1373 *      @host: InitIO host we are controlling
1374 *
1375 * state before CDB xfer is done
1376 */
1377
1378static int initio_state_3(struct initio_host * host)
1379{
1380        struct scsi_ctrl_blk *scb = host->active;
1381        struct target_control *active_tc = host->active_tc;
1382        int i;
1383
1384#if DEBUG_STATE
1385        printk("-s3-");
1386#endif
1387        for (;;) {
1388                switch (host->phase) {
1389                case CMD_OUT:   /* Command out phase            */
1390                        for (i = 0; i < (int) scb->cdblen; i++)
1391                                outb(scb->cdb[i], host->addr + TUL_SFifo);
1392                        outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1393                        if (wait_tulip(host) == -1)
1394                                return -1;
1395                        if (host->phase == CMD_OUT)
1396                                return initio_bad_seq(host);
1397                        return 4;
1398
1399                case MSG_IN:    /* Message in phase             */
1400                        scb->next_state = 3;
1401                        if (initio_msgin(host) == -1)
1402                                return -1;
1403                        break;
1404
1405                case STATUS_IN: /* Status phase                 */
1406                        if (initio_status_msg(host) == -1)
1407                                return -1;
1408                        break;
1409
1410                case MSG_OUT:   /* Message out phase            */
1411                        if (active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) {
1412                                outb(MSG_NOP, host->addr + TUL_SFifo);          /* msg nop */
1413                                outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1414                                if (wait_tulip(host) == -1)
1415                                        return -1;
1416                        } else {
1417                                active_tc->flags |= TCF_SYNC_DONE;
1418
1419                                outb(MSG_EXTEND, host->addr + TUL_SFifo);
1420                                outb(3, host->addr + TUL_SFifo);        /* ext. msg len */
1421                                outb(1, host->addr + TUL_SFifo);        /* sync request */
1422                                outb(initio_rate_tbl[active_tc->flags & TCF_SCSI_RATE], host->addr + TUL_SFifo);
1423                                outb(MAX_OFFSET, host->addr + TUL_SFifo);       /* REQ/ACK offset */
1424                                outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1425                                if (wait_tulip(host) == -1)
1426                                        return -1;
1427                                outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1428                                outb(inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7), host->addr + TUL_SSignal);
1429
1430                        }
1431                        break;
1432                default:
1433                        return initio_bad_seq(host);
1434                }
1435        }
1436}
1437
1438/**
1439 *      initio_state_4          -       SCSI state machine
1440 *      @host: InitIO host we are controlling
1441 *
1442 *      SCSI state machine. State 4
1443 */
1444
1445static int initio_state_4(struct initio_host * host)
1446{
1447        struct scsi_ctrl_blk *scb = host->active;
1448
1449#if DEBUG_STATE
1450        printk("-s4-");
1451#endif
1452        if ((scb->flags & SCF_DIR) == SCF_NO_XF) {
1453                return 6;       /* Go to state 6 (After data) */
1454        }
1455        for (;;) {
1456                if (scb->buflen == 0)
1457                        return 6;
1458
1459                switch (host->phase) {
1460
1461                case STATUS_IN: /* Status phase                 */
1462                        if ((scb->flags & SCF_DIR) != 0)        /* if direction bit set then report data underrun */
1463                                scb->hastat = HOST_DO_DU;
1464                        if ((initio_status_msg(host)) == -1)
1465                                return -1;
1466                        break;
1467
1468                case MSG_IN:    /* Message in phase             */
1469                        scb->next_state = 0x4;
1470                        if (initio_msgin(host) == -1)
1471                                return -1;
1472                        break;
1473
1474                case MSG_OUT:   /* Message out phase            */
1475                        if (host->jsstatus0 & TSS_PAR_ERROR) {
1476                                scb->buflen = 0;
1477                                scb->hastat = HOST_DO_DU;
1478                                if (initio_msgout_ide(host) == -1)
1479                                        return -1;
1480                                return 6;
1481                        } else {
1482                                outb(MSG_NOP, host->addr + TUL_SFifo);          /* msg nop */
1483                                outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1484                                if (wait_tulip(host) == -1)
1485                                        return -1;
1486                        }
1487                        break;
1488
1489                case DATA_IN:   /* Data in phase                */
1490                        return initio_xfer_data_in(host);
1491
1492                case DATA_OUT:  /* Data out phase               */
1493                        return initio_xfer_data_out(host);
1494
1495                default:
1496                        return initio_bad_seq(host);
1497                }
1498        }
1499}
1500
1501
1502/**
1503 *      initio_state_5          -       SCSI state machine
1504 *      @host: InitIO host we are controlling
1505 *
1506 *      State after dma xfer done or phase change before xfer done
1507 */
1508
1509static int initio_state_5(struct initio_host * host)
1510{
1511        struct scsi_ctrl_blk *scb = host->active;
1512        long cnt, xcnt;         /* cannot use unsigned !! code: if (xcnt < 0) */
1513
1514#if DEBUG_STATE
1515        printk("-s5-");
1516#endif
1517        /*------ get remaining count -------*/
1518        cnt = inl(host->addr + TUL_SCnt0) & 0x0FFFFFF;
1519
1520        if (inb(host->addr + TUL_XCmd) & 0x20) {
1521                /* ----------------------- DATA_IN ----------------------------- */
1522                /* check scsi parity error */
1523                if (host->jsstatus0 & TSS_PAR_ERROR)
1524                        scb->hastat = HOST_DO_DU;
1525                if (inb(host->addr + TUL_XStatus) & XPEND) {    /* DMA xfer pending, Send STOP  */
1526                        /* tell Hardware  scsi xfer has been terminated */
1527                        outb(inb(host->addr + TUL_XCtrl) | 0x80, host->addr + TUL_XCtrl);
1528                        /* wait until DMA xfer not pending */
1529                        while (inb(host->addr + TUL_XStatus) & XPEND)
1530                                cpu_relax();
1531                }
1532        } else {
1533                /*-------- DATA OUT -----------*/
1534                if ((inb(host->addr + TUL_SStatus1) & TSS_XFER_CMP) == 0) {
1535                        if (host->active_tc->js_period & TSC_WIDE_SCSI)
1536                                cnt += (inb(host->addr + TUL_SFifoCnt) & 0x1F) << 1;
1537                        else
1538                                cnt += (inb(host->addr + TUL_SFifoCnt) & 0x1F);
1539                }
1540                if (inb(host->addr + TUL_XStatus) & XPEND) {    /* if DMA xfer is pending, abort DMA xfer */
1541                        outb(TAX_X_ABT, host->addr + TUL_XCmd);
1542                        /* wait Abort DMA xfer done */
1543                        while ((inb(host->addr + TUL_Int) & XABT) == 0)
1544                                cpu_relax();
1545                }
1546                if ((cnt == 1) && (host->phase == DATA_OUT)) {
1547                        outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1548                        if (wait_tulip(host) == -1)
1549                                return -1;
1550                        cnt = 0;
1551                } else {
1552                        if ((inb(host->addr + TUL_SStatus1) & TSS_XFER_CMP) == 0)
1553                                outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1554                }
1555        }
1556        if (cnt == 0) {
1557                scb->buflen = 0;
1558                return 6;       /* After Data */
1559        }
1560        /* Update active data pointer */
1561        xcnt = (long) scb->buflen - cnt;        /* xcnt== bytes already xferred */
1562        scb->buflen = (u32) cnt;                /* cnt == bytes left to be xferred */
1563        if (scb->flags & SCF_SG) {
1564                struct sg_entry *sgp;
1565                unsigned long i;
1566
1567                sgp = &scb->sglist[scb->sgidx];
1568                for (i = scb->sgidx; i < scb->sgmax; sgp++, i++) {
1569                        xcnt -= (long) sgp->len;
1570                        if (xcnt < 0) {         /* this sgp xfer half done */
1571                                xcnt += (long) sgp->len;        /* xcnt == bytes xferred in this sgp */
1572                                sgp->data += (u32) xcnt;        /* new ptr to be xfer */
1573                                sgp->len -= (u32) xcnt; /* new len to be xfer */
1574                                scb->bufptr += ((u32) (i - scb->sgidx) << 3);
1575                                /* new SG table ptr */
1576                                scb->sglen = (u8) (scb->sgmax - i);
1577                                /* new SG table len */
1578                                scb->sgidx = (u16) i;
1579                                /* for next disc and come in this loop */
1580                                return 4;       /* Go to state 4                */
1581                        }
1582                        /* else (xcnt >= 0 , i.e. this sgp already xferred */
1583                }               /* for */
1584                return 6;       /* Go to state 6                */
1585        } else {
1586                scb->bufptr += (u32) xcnt;
1587        }
1588        return 4;               /* Go to state 4                */
1589}
1590
1591/**
1592 *      initio_state_6          -       SCSI state machine
1593 *      @host: InitIO host we are controlling
1594 *
1595 *      State after Data phase
1596 */
1597
1598static int initio_state_6(struct initio_host * host)
1599{
1600        struct scsi_ctrl_blk *scb = host->active;
1601
1602#if DEBUG_STATE
1603        printk("-s6-");
1604#endif
1605        for (;;) {
1606                switch (host->phase) {
1607                case STATUS_IN: /* Status phase                 */
1608                        if ((initio_status_msg(host)) == -1)
1609                                return -1;
1610                        break;
1611
1612                case MSG_IN:    /* Message in phase             */
1613                        scb->next_state = 6;
1614                        if ((initio_msgin(host)) == -1)
1615                                return -1;
1616                        break;
1617
1618                case MSG_OUT:   /* Message out phase            */
1619                        outb(MSG_NOP, host->addr + TUL_SFifo);          /* msg nop */
1620                        outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1621                        if (wait_tulip(host) == -1)
1622                                return -1;
1623                        break;
1624
1625                case DATA_IN:   /* Data in phase                */
1626                        return initio_xpad_in(host);
1627
1628                case DATA_OUT:  /* Data out phase               */
1629                        return initio_xpad_out(host);
1630
1631                default:
1632                        return initio_bad_seq(host);
1633                }
1634        }
1635}
1636
1637/**
1638 *      initio_state_7          -       SCSI state machine
1639 *      @host: InitIO host we are controlling
1640 *
1641 */
1642
1643int initio_state_7(struct initio_host * host)
1644{
1645        int cnt, i;
1646
1647#if DEBUG_STATE
1648        printk("-s7-");
1649#endif
1650        /* flush SCSI FIFO */
1651        cnt = inb(host->addr + TUL_SFifoCnt) & 0x1F;
1652        if (cnt) {
1653                for (i = 0; i < cnt; i++)
1654                        inb(host->addr + TUL_SFifo);
1655        }
1656        switch (host->phase) {
1657        case DATA_IN:           /* Data in phase                */
1658        case DATA_OUT:          /* Data out phase               */
1659                return initio_bad_seq(host);
1660        default:
1661                return 6;       /* Go to state 6                */
1662        }
1663}
1664
1665/**
1666 *      initio_xfer_data_in     -       Commence data input
1667 *      @host: InitIO host in use
1668 *
1669 *      Commence a block of data transfer. The transfer itself will
1670 *      be managed by the controller and we will get a completion (or
1671 *      failure) interrupt.
1672 */
1673static int initio_xfer_data_in(struct initio_host * host)
1674{
1675        struct scsi_ctrl_blk *scb = host->active;
1676
1677        if ((scb->flags & SCF_DIR) == SCF_DOUT)
1678                return 6;       /* wrong direction */
1679
1680        outl(scb->buflen, host->addr + TUL_SCnt0);
1681        outb(TSC_XF_DMA_IN, host->addr + TUL_SCmd);     /* 7/25/95 */
1682
1683        if (scb->flags & SCF_SG) {      /* S/G xfer */
1684                outl(((u32) scb->sglen) << 3, host->addr + TUL_XCntH);
1685                outl(scb->bufptr, host->addr + TUL_XAddH);
1686                outb(TAX_SG_IN, host->addr + TUL_XCmd);
1687        } else {
1688                outl(scb->buflen, host->addr + TUL_XCntH);
1689                outl(scb->bufptr, host->addr + TUL_XAddH);
1690                outb(TAX_X_IN, host->addr + TUL_XCmd);
1691        }
1692        scb->next_state = 0x5;
1693        return 0;               /* return to OS, wait xfer done , let jas_isr come in */
1694}
1695
1696/**
1697 *      initio_xfer_data_out    -       Commence data output
1698 *      @host: InitIO host in use
1699 *
1700 *      Commence a block of data transfer. The transfer itself will
1701 *      be managed by the controller and we will get a completion (or
1702 *      failure) interrupt.
1703 */
1704
1705static int initio_xfer_data_out(struct initio_host * host)
1706{
1707        struct scsi_ctrl_blk *scb = host->active;
1708
1709        if ((scb->flags & SCF_DIR) == SCF_DIN)
1710                return 6;       /* wrong direction */
1711
1712        outl(scb->buflen, host->addr + TUL_SCnt0);
1713        outb(TSC_XF_DMA_OUT, host->addr + TUL_SCmd);
1714
1715        if (scb->flags & SCF_SG) {      /* S/G xfer */
1716                outl(((u32) scb->sglen) << 3, host->addr + TUL_XCntH);
1717                outl(scb->bufptr, host->addr + TUL_XAddH);
1718                outb(TAX_SG_OUT, host->addr + TUL_XCmd);
1719        } else {
1720                outl(scb->buflen, host->addr + TUL_XCntH);
1721                outl(scb->bufptr, host->addr + TUL_XAddH);
1722                outb(TAX_X_OUT, host->addr + TUL_XCmd);
1723        }
1724
1725        scb->next_state = 0x5;
1726        return 0;               /* return to OS, wait xfer done , let jas_isr come in */
1727}
1728
1729int initio_xpad_in(struct initio_host * host)
1730{
1731        struct scsi_ctrl_blk *scb = host->active;
1732        struct target_control *active_tc = host->active_tc;
1733
1734        if ((scb->flags & SCF_DIR) != SCF_NO_DCHK)
1735                scb->hastat = HOST_DO_DU;       /* over run             */
1736        for (;;) {
1737                if (active_tc->js_period & TSC_WIDE_SCSI)
1738                        outl(2, host->addr + TUL_SCnt0);
1739                else
1740                        outl(1, host->addr + TUL_SCnt0);
1741
1742                outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd);
1743                if (wait_tulip(host) == -1)
1744                        return -1;
1745                if (host->phase != DATA_IN) {
1746                        outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1747                        return 6;
1748                }
1749                inb(host->addr + TUL_SFifo);
1750        }
1751}
1752
1753int initio_xpad_out(struct initio_host * host)
1754{
1755        struct scsi_ctrl_blk *scb = host->active;
1756        struct target_control *active_tc = host->active_tc;
1757
1758        if ((scb->flags & SCF_DIR) != SCF_NO_DCHK)
1759                scb->hastat = HOST_DO_DU;       /* over run             */
1760        for (;;) {
1761                if (active_tc->js_period & TSC_WIDE_SCSI)
1762                        outl(2, host->addr + TUL_SCnt0);
1763                else
1764                        outl(1, host->addr + TUL_SCnt0);
1765
1766                outb(0, host->addr + TUL_SFifo);
1767                outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1768                if ((wait_tulip(host)) == -1)
1769                        return -1;
1770                if (host->phase != DATA_OUT) {  /* Disable wide CPU to allow read 16 bits */
1771                        outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1);
1772                        outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1773                        return 6;
1774                }
1775        }
1776}
1777
1778int initio_status_msg(struct initio_host * host)
1779{                               /* status & MSG_IN */
1780        struct scsi_ctrl_blk *scb = host->active;
1781        u8 msg;
1782
1783        outb(TSC_CMD_COMP, host->addr + TUL_SCmd);
1784        if (wait_tulip(host) == -1)
1785                return -1;
1786
1787        /* get status */
1788        scb->tastat = inb(host->addr + TUL_SFifo);
1789
1790        if (host->phase == MSG_OUT) {
1791                if (host->jsstatus0 & TSS_PAR_ERROR)
1792                        outb(MSG_PARITY, host->addr + TUL_SFifo);
1793                else
1794                        outb(MSG_NOP, host->addr + TUL_SFifo);
1795                outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1796                return wait_tulip(host);
1797        }
1798        if (host->phase == MSG_IN) {
1799                msg = inb(host->addr + TUL_SFifo);
1800                if (host->jsstatus0 & TSS_PAR_ERROR) {  /* Parity error                 */
1801                        if ((initio_msgin_accept(host)) == -1)
1802                                return -1;
1803                        if (host->phase != MSG_OUT)
1804                                return initio_bad_seq(host);
1805                        outb(MSG_PARITY, host->addr + TUL_SFifo);
1806                        outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1807                        return wait_tulip(host);
1808                }
1809                if (msg == 0) { /* Command complete             */
1810
1811                        if ((scb->tastat & 0x18) == 0x10)       /* No link support              */
1812                                return initio_bad_seq(host);
1813                        outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1814                        outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd);
1815                        return initio_wait_done_disc(host);
1816
1817                }
1818                if (msg == MSG_LINK_COMP || msg == MSG_LINK_FLAG) {
1819                        if ((scb->tastat & 0x18) == 0x10)
1820                                return initio_msgin_accept(host);
1821                }
1822        }
1823        return initio_bad_seq(host);
1824}
1825
1826
1827/* scsi bus free */
1828int int_initio_busfree(struct initio_host * host)
1829{
1830        struct scsi_ctrl_blk *scb = host->active;
1831
1832        if (scb != NULL) {
1833                if (scb->status & SCB_SELECT) {         /* selection timeout */
1834                        initio_unlink_pend_scb(host, scb);
1835                        scb->hastat = HOST_SEL_TOUT;
1836                        initio_append_done_scb(host, scb);
1837                } else {        /* Unexpected bus free          */
1838                        initio_unlink_busy_scb(host, scb);
1839                        scb->hastat = HOST_BUS_FREE;
1840                        initio_append_done_scb(host, scb);
1841                }
1842                host->active = NULL;
1843                host->active_tc = NULL;
1844        }
1845        outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);          /* Flush SCSI FIFO  */
1846        outb(TSC_INITDEFAULT, host->addr + TUL_SConfig);
1847        outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect       */
1848        return -1;
1849}
1850
1851
1852/**
1853 *      int_initio_scsi_rst     -       SCSI reset occurred
1854 *      @host: Host seeing the reset
1855 *
1856 *      A SCSI bus reset has occurred. Clean up any pending transfer
1857 *      the hardware is doing by DMA and then abort all active and
1858 *      disconnected commands. The mid layer should sort the rest out
1859 *      for us
1860 */
1861
1862static int int_initio_scsi_rst(struct initio_host * host)
1863{
1864        struct scsi_ctrl_blk *scb;
1865        int i;
1866
1867        /* if DMA xfer is pending, abort DMA xfer */
1868        if (inb(host->addr + TUL_XStatus) & 0x01) {
1869                outb(TAX_X_ABT | TAX_X_CLR_FIFO, host->addr + TUL_XCmd);
1870                /* wait Abort DMA xfer done */
1871                while ((inb(host->addr + TUL_Int) & 0x04) == 0)
1872                        cpu_relax();
1873                outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1874        }
1875        /* Abort all active & disconnected scb */
1876        while ((scb = initio_pop_busy_scb(host)) != NULL) {
1877                scb->hastat = HOST_BAD_PHAS;
1878                initio_append_done_scb(host, scb);
1879        }
1880        host->active = NULL;
1881        host->active_tc = NULL;
1882
1883        /* clr sync nego. done flag */
1884        for (i = 0; i < host->max_tar; i++)
1885                host->targets[i].flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE);
1886        return -1;
1887}
1888
1889/**
1890 *      int_initio_scsi_resel   -       Reselection occurred
1891 *      @host: InitIO host adapter
1892 *
1893 *      A SCSI reselection event has been signalled and the interrupt
1894 *      is now being processed. Work out which command block needs attention
1895 *      and continue processing that command.
1896 */
1897
1898int int_initio_resel(struct initio_host * host)
1899{
1900        struct scsi_ctrl_blk *scb;
1901        struct target_control *active_tc;
1902        u8 tag, msg = 0;
1903        u8 tar, lun;
1904
1905        if ((scb = host->active) != NULL) {
1906                /* FIXME: Why check and not just clear ? */
1907                if (scb->status & SCB_SELECT)           /* if waiting for selection complete */
1908                        scb->status &= ~SCB_SELECT;
1909                host->active = NULL;
1910        }
1911        /* --------- get target id---------------------- */
1912        tar = inb(host->addr + TUL_SBusId);
1913        /* ------ get LUN from Identify message----------- */
1914        lun = inb(host->addr + TUL_SIdent) & 0x0F;
1915        /* 07/22/98 from 0x1F -> 0x0F */
1916        active_tc = &host->targets[tar];
1917        host->active_tc = active_tc;
1918        outb(active_tc->sconfig0, host->addr + TUL_SConfig);
1919        outb(active_tc->js_period, host->addr + TUL_SPeriod);
1920
1921        /* ------------- tag queueing ? ------------------- */
1922        if (active_tc->drv_flags & TCF_DRV_EN_TAG) {
1923                if ((initio_msgin_accept(host)) == -1)
1924                        return -1;
1925                if (host->phase != MSG_IN)
1926                        goto no_tag;
1927                outl(1, host->addr + TUL_SCnt0);
1928                outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd);
1929                if (wait_tulip(host) == -1)
1930                        return -1;
1931                msg = inb(host->addr + TUL_SFifo);      /* Read Tag Message    */
1932
1933                if (msg < MSG_STAG || msg > MSG_OTAG)           /* Is simple Tag      */
1934                        goto no_tag;
1935
1936                if (initio_msgin_accept(host) == -1)
1937                        return -1;
1938
1939                if (host->phase != MSG_IN)
1940                        goto no_tag;
1941
1942                outl(1, host->addr + TUL_SCnt0);
1943                outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd);
1944                if (wait_tulip(host) == -1)
1945                        return -1;
1946                tag = inb(host->addr + TUL_SFifo);      /* Read Tag ID       */
1947                scb = host->scb + tag;
1948                if (scb->target != tar || scb->lun != lun) {
1949                        return initio_msgout_abort_tag(host);
1950                }
1951                if (scb->status != SCB_BUSY) {  /* 03/24/95             */
1952                        return initio_msgout_abort_tag(host);
1953                }
1954                host->active = scb;
1955                if ((initio_msgin_accept(host)) == -1)
1956                        return -1;
1957        } else {                /* No tag               */
1958              no_tag:
1959                if ((scb = initio_find_busy_scb(host, tar | (lun << 8))) == NULL) {
1960                        return initio_msgout_abort_targ(host);
1961                }
1962                host->active = scb;
1963                if (!(active_tc->drv_flags & TCF_DRV_EN_TAG)) {
1964                        if ((initio_msgin_accept(host)) == -1)
1965                                return -1;
1966                }
1967        }
1968        return 0;
1969}
1970
1971/**
1972 *      int_initio_bad_seq              -       out of phase
1973 *      @host: InitIO host flagging event
1974 *
1975 *      We have ended up out of phase somehow. Reset the host controller
1976 *      and throw all our toys out of the pram. Let the midlayer clean up
1977 */
1978
1979static int int_initio_bad_seq(struct initio_host * host)
1980{                               /* target wrong phase           */
1981        struct scsi_ctrl_blk *scb;
1982        int i;
1983
1984        initio_reset_scsi(host, 10);
1985
1986        while ((scb = initio_pop_busy_scb(host)) != NULL) {
1987                scb->hastat = HOST_BAD_PHAS;
1988                initio_append_done_scb(host, scb);
1989        }
1990        for (i = 0; i < host->max_tar; i++)
1991                host->targets[i].flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE);
1992        return -1;
1993}
1994
1995
1996/**
1997 *      initio_msgout_abort_targ                -       abort a tag
1998 *      @host: InitIO host
1999 *
2000 *      Abort when the target/lun does not match or when our SCB is not
2001 *      busy. Used by untagged commands.
2002 */
2003
2004static int initio_msgout_abort_targ(struct initio_host * host)
2005{
2006
2007        outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal);
2008        if (initio_msgin_accept(host) == -1)
2009                return -1;
2010        if (host->phase != MSG_OUT)
2011                return initio_bad_seq(host);
2012
2013        outb(MSG_ABORT, host->addr + TUL_SFifo);
2014        outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
2015
2016        return initio_wait_disc(host);
2017}
2018
2019/**
2020 *      initio_msgout_abort_tag         -       abort a tag
2021 *      @host: InitIO host
2022 *
2023 *      Abort when the target/lun does not match or when our SCB is not
2024 *      busy. Used for tagged commands.
2025 */
2026
2027static int initio_msgout_abort_tag(struct initio_host * host)
2028{
2029
2030        outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal);
2031        if (initio_msgin_accept(host) == -1)
2032                return -1;
2033        if (host->phase != MSG_OUT)
2034                return initio_bad_seq(host);
2035
2036        outb(MSG_ABORT_TAG, host->addr + TUL_SFifo);
2037        outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
2038
2039        return initio_wait_disc(host);
2040
2041}
2042
2043/**
2044 *      initio_msgin            -       Message in
2045 *      @host: InitIO Host
2046 *
2047 *      Process incoming message
2048 */
2049static int initio_msgin(struct initio_host * host)
2050{
2051        struct target_control *active_tc;
2052
2053        for (;;) {
2054                outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
2055
2056                outl(1, host->addr + TUL_SCnt0);
2057                outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd);
2058                if (wait_tulip(host) == -1)
2059                        return -1;
2060
2061                switch (inb(host->addr + TUL_SFifo)) {
2062                case MSG_DISC:  /* Disconnect msg */
2063                        outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd);
2064                        return initio_wait_disc(host);
2065                case MSG_SDP:
2066                case MSG_RESTORE:
2067                case MSG_NOP:
2068                        initio_msgin_accept(host);
2069                        break;
2070                case MSG_REJ:   /* Clear ATN first              */
2071                        outb((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)),
2072                                host->addr + TUL_SSignal);
2073                        active_tc = host->active_tc;
2074                        if ((active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0)       /* do sync nego */
2075                                outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN),
2076                                        host->addr + TUL_SSignal);
2077                        initio_msgin_accept(host);
2078                        break;
2079                case MSG_EXTEND:        /* extended msg */
2080                        initio_msgin_extend(host);
2081                        break;
2082                case MSG_IGNOREWIDE:
2083                        initio_msgin_accept(host);
2084                        break;
2085                case MSG_COMP:
2086                        outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
2087                        outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd);
2088                        return initio_wait_done_disc(host);
2089                default:
2090                        initio_msgout_reject(host);
2091                        break;
2092                }
2093                if (host->phase != MSG_IN)
2094                        return host->phase;
2095        }
2096        /* statement won't reach here */
2097}
2098
2099static int initio_msgout_reject(struct initio_host * host)
2100{
2101        outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal);
2102
2103        if (initio_msgin_accept(host) == -1)
2104                return -1;
2105
2106        if (host->phase == MSG_OUT) {
2107                outb(MSG_REJ, host->addr + TUL_SFifo);          /* Msg reject           */
2108                outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
2109                return wait_tulip(host);
2110        }
2111        return host->phase;
2112}
2113
2114static int initio_msgout_ide(struct initio_host * host)
2115{
2116        outb(MSG_IDE, host->addr + TUL_SFifo);          /* Initiator Detected Error */
2117        outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
2118        return wait_tulip(host);
2119}
2120
2121static int initio_msgin_extend(struct initio_host * host)
2122{
2123        u8 len, idx;
2124
2125        if (initio_msgin_accept(host) != MSG_IN)
2126                return host->phase;
2127
2128        /* Get extended msg length      */
2129        outl(1, host->addr + TUL_SCnt0);
2130        outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd);
2131        if (wait_tulip(host) == -1)
2132                return -1;
2133
2134        len = inb(host->addr + TUL_SFifo);
2135        host->msg[0] = len;
2136        for (idx = 1; len != 0; len--) {
2137
2138                if ((initio_msgin_accept(host)) != MSG_IN)
2139                        return host->phase;
2140                outl(1, host->addr + TUL_SCnt0);
2141                outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd);
2142                if (wait_tulip(host) == -1)
2143                        return -1;
2144                host->msg[idx++] = inb(host->addr + TUL_SFifo);
2145        }
2146        if (host->msg[1] == 1) {                /* if it's synchronous data transfer request */
2147                u8 r;
2148                if (host->msg[0] != 3)  /* if length is not right */
2149                        return initio_msgout_reject(host);
2150                if (host->active_tc->flags & TCF_NO_SYNC_NEGO) {        /* Set OFFSET=0 to do async, nego back */
2151                        host->msg[3] = 0;
2152                } else {
2153                        if (initio_msgin_sync(host) == 0 &&
2154                            (host->active_tc->flags & TCF_SYNC_DONE)) {
2155                                initio_sync_done(host);
2156                                return initio_msgin_accept(host);
2157                        }
2158                }
2159
2160                r = inb(host->addr + TUL_SSignal);
2161                outb((r & (TSC_SET_ACK | 7)) | TSC_SET_ATN,
2162                        host->addr + TUL_SSignal);
2163                if (initio_msgin_accept(host) != MSG_OUT)
2164                        return host->phase;
2165                /* sync msg out */
2166                outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
2167
2168                initio_sync_done(host);
2169
2170                outb(MSG_EXTEND, host->addr + TUL_SFifo);
2171                outb(3, host->addr + TUL_SFifo);
2172                outb(1, host->addr + TUL_SFifo);
2173                outb(host->msg[2], host->addr + TUL_SFifo);
2174                outb(host->msg[3], host->addr + TUL_SFifo);
2175                outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
2176                return wait_tulip(host);
2177        }
2178        if (host->msg[0] != 2 || host->msg[1] != 3)
2179                return initio_msgout_reject(host);
2180        /* if it's WIDE DATA XFER REQ   */
2181        if (host->active_tc->flags & TCF_NO_WDTR) {
2182                host->msg[2] = 0;
2183        } else {
2184                if (host->msg[2] > 2)   /* > 32 bits            */
2185                        return initio_msgout_reject(host);
2186                if (host->msg[2] == 2) {                /* == 32                */
2187                        host->msg[2] = 1;
2188                } else {
2189                        if ((host->active_tc->flags & TCF_NO_WDTR) == 0) {
2190                                wdtr_done(host);
2191                                if ((host->active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0)
2192                                        outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal);
2193                                return initio_msgin_accept(host);
2194                        }
2195                }
2196        }
2197        outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal);
2198
2199        if (initio_msgin_accept(host) != MSG_OUT)
2200                return host->phase;
2201        /* WDTR msg out                 */
2202        outb(MSG_EXTEND, host->addr + TUL_SFifo);
2203        outb(2, host->addr + TUL_SFifo);
2204        outb(3, host->addr + TUL_SFifo);
2205        outb(host->msg[2], host->addr + TUL_SFifo);
2206        outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
2207        return wait_tulip(host);
2208}
2209
2210static int initio_msgin_sync(struct initio_host * host)
2211{
2212        char default_period;
2213
2214        default_period = initio_rate_tbl[host->active_tc->flags & TCF_SCSI_RATE];
2215        if (host->msg[3] > MAX_OFFSET) {
2216                host->msg[3] = MAX_OFFSET;
2217                if (host->msg[2] < default_period) {
2218                        host->msg[2] = default_period;
2219                        return 1;
2220                }
2221                if (host->msg[2] >= 59) /* Change to async              */
2222                        host->msg[3] = 0;
2223                return 1;
2224        }
2225        /* offset requests asynchronous transfers ? */
2226        if (host->msg[3] == 0) {
2227                return 0;
2228        }
2229        if (host->msg[2] < default_period) {
2230                host->msg[2] = default_period;
2231                return 1;
2232        }
2233        if (host->msg[2] >= 59) {
2234                host->msg[3] = 0;
2235                return 1;
2236        }
2237        return 0;
2238}
2239
2240static int wdtr_done(struct initio_host * host)
2241{
2242        host->active_tc->flags &= ~TCF_SYNC_DONE;
2243        host->active_tc->flags |= TCF_WDTR_DONE;
2244
2245        host->active_tc->js_period = 0;
2246        if (host->msg[2])       /* if 16 bit */
2247                host->active_tc->js_period |= TSC_WIDE_SCSI;
2248        host->active_tc->sconfig0 &= ~TSC_ALT_PERIOD;
2249        outb(host->active_tc->sconfig0, host->addr + TUL_SConfig);
2250        outb(host->active_tc->js_period, host->addr + TUL_SPeriod);
2251
2252        return 1;
2253}
2254
2255static int initio_sync_done(struct initio_host * host)
2256{
2257        int i;
2258
2259        host->active_tc->flags |= TCF_SYNC_DONE;
2260
2261        if (host->msg[3]) {
2262                host->active_tc->js_period |= host->msg[3];
2263                for (i = 0; i < 8; i++) {
2264                        if (initio_rate_tbl[i] >= host->msg[2]) /* pick the big one */
2265                                break;
2266                }
2267                host->active_tc->js_period |= (i << 4);
2268                host->active_tc->sconfig0 |= TSC_ALT_PERIOD;
2269        }
2270        outb(host->active_tc->sconfig0, host->addr + TUL_SConfig);
2271        outb(host->active_tc->js_period, host->addr + TUL_SPeriod);
2272
2273        return -1;
2274}
2275
2276
2277static int initio_post_scsi_rst(struct initio_host * host)
2278{
2279        struct scsi_ctrl_blk *scb;
2280        struct target_control *active_tc;
2281        int i;
2282
2283        host->active = NULL;
2284        host->active_tc = NULL;
2285        host->flags = 0;
2286
2287        while ((scb = initio_pop_busy_scb(host)) != NULL) {
2288                scb->hastat = HOST_BAD_PHAS;
2289                initio_append_done_scb(host, scb);
2290        }
2291        /* clear sync done flag         */
2292        active_tc = &host->targets[0];
2293        for (i = 0; i < host->max_tar; active_tc++, i++) {
2294                active_tc->flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE);
2295                /* Initialize the sync. xfer register values to an asyn xfer */
2296                active_tc->js_period = 0;
2297                active_tc->sconfig0 = host->sconf1;
2298                host->act_tags[0] = 0;  /* 07/22/98 */
2299                host->targets[i].flags &= ~TCF_BUSY;    /* 07/22/98 */
2300        }                       /* for */
2301
2302        return -1;
2303}
2304
2305static void initio_select_atn_stop(struct initio_host * host, struct scsi_ctrl_blk * scb)
2306{
2307        scb->status |= SCB_SELECT;
2308        scb->next_state = 0x1;
2309        host->active = scb;
2310        host->active_tc = &host->targets[scb->target];
2311        outb(TSC_SELATNSTOP, host->addr + TUL_SCmd);
2312}
2313
2314
2315static void initio_select_atn(struct initio_host * host, struct scsi_ctrl_blk * scb)
2316{
2317        int i;
2318
2319        scb->status |= SCB_SELECT;
2320        scb->next_state = 0x2;
2321
2322        outb(scb->ident, host->addr + TUL_SFifo);
2323        for (i = 0; i < (int) scb->cdblen; i++)
2324                outb(scb->cdb[i], host->addr + TUL_SFifo);
2325        host->active_tc = &host->targets[scb->target];
2326        host->active = scb;
2327        outb(TSC_SEL_ATN, host->addr + TUL_SCmd);
2328}
2329
2330static void initio_select_atn3(struct initio_host * host, struct scsi_ctrl_blk * scb)
2331{
2332        int i;
2333
2334        scb->status |= SCB_SELECT;
2335        scb->next_state = 0x2;
2336
2337        outb(scb->ident, host->addr + TUL_SFifo);
2338        outb(scb->tagmsg, host->addr + TUL_SFifo);
2339        outb(scb->tagid, host->addr + TUL_SFifo);
2340        for (i = 0; i < scb->cdblen; i++)
2341                outb(scb->cdb[i], host->addr + TUL_SFifo);
2342        host->active_tc = &host->targets[scb->target];
2343        host->active = scb;
2344        outb(TSC_SEL_ATN3, host->addr + TUL_SCmd);
2345}
2346
2347/**
2348 *      initio_bus_device_reset -        SCSI Bus Device Reset
2349 *      @host: InitIO host to reset
2350 *
2351 *      Perform a device reset and abort all pending SCBs for the
2352 *      victim device
2353 */
2354int initio_bus_device_reset(struct initio_host * host)
2355{
2356        struct scsi_ctrl_blk *scb = host->active;
2357        struct target_control *active_tc = host->active_tc;
2358        struct scsi_ctrl_blk *tmp, *prev;
2359        u8 tar;
2360
2361        if (host->phase != MSG_OUT)
2362                return int_initio_bad_seq(host);        /* Unexpected phase */
2363
2364        initio_unlink_pend_scb(host, scb);
2365        initio_release_scb(host, scb);
2366
2367
2368        tar = scb->target;      /* target                       */
2369        active_tc->flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE | TCF_BUSY);
2370        /* clr sync. nego & WDTR flags  07/22/98 */
2371
2372        /* abort all SCB with same target */
2373        prev = tmp = host->first_busy;  /* Check Busy queue */
2374        while (tmp != NULL) {
2375                if (tmp->target == tar) {
2376                        /* unlink it */
2377                        if (tmp == host->first_busy) {
2378                                if ((host->first_busy = tmp->next) == NULL)
2379                                        host->last_busy = NULL;
2380                        } else {
2381                                prev->next = tmp->next;
2382                                if (tmp == host->last_busy)
2383                                        host->last_busy = prev;
2384                        }
2385                        tmp->hastat = HOST_ABORTED;
2386                        initio_append_done_scb(host, tmp);
2387                }
2388                /* Previous haven't change      */
2389                else {
2390                        prev = tmp;
2391                }
2392                tmp = tmp->next;
2393        }
2394        outb(MSG_DEVRST, host->addr + TUL_SFifo);
2395        outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
2396        return initio_wait_disc(host);
2397
2398}
2399
2400static int initio_msgin_accept(struct initio_host * host)
2401{
2402        outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd);
2403        return wait_tulip(host);
2404}
2405
2406static int wait_tulip(struct initio_host * host)
2407{
2408
2409        while (!((host->jsstatus0 = inb(host->addr + TUL_SStatus0))
2410                 & TSS_INT_PENDING))
2411                        cpu_relax();
2412
2413        host->jsint = inb(host->addr + TUL_SInt);
2414        host->phase = host->jsstatus0 & TSS_PH_MASK;
2415        host->jsstatus1 = inb(host->addr + TUL_SStatus1);
2416
2417        if (host->jsint & TSS_RESEL_INT)        /* if SCSI bus reset detected */
2418                return int_initio_resel(host);
2419        if (host->jsint & TSS_SEL_TIMEOUT)      /* if selected/reselected timeout interrupt */
2420                return int_initio_busfree(host);
2421        if (host->jsint & TSS_SCSIRST_INT)      /* if SCSI bus reset detected   */
2422                return int_initio_scsi_rst(host);
2423
2424        if (host->jsint & TSS_DISC_INT) {       /* BUS disconnection            */
2425                if (host->flags & HCF_EXPECT_DONE_DISC) {
2426                        outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */
2427                        initio_unlink_busy_scb(host, host->active);
2428                        host->active->hastat = 0;
2429                        initio_append_done_scb(host, host->active);
2430                        host->active = NULL;
2431                        host->active_tc = NULL;
2432                        host->flags &= ~HCF_EXPECT_DONE_DISC;
2433                        outb(TSC_INITDEFAULT, host->addr + TUL_SConfig);
2434                        outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */
2435                        return -1;
2436                }
2437                if (host->flags & HCF_EXPECT_DISC) {
2438                        outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */
2439                        host->active = NULL;
2440                        host->active_tc = NULL;
2441                        host->flags &= ~HCF_EXPECT_DISC;
2442                        outb(TSC_INITDEFAULT, host->addr + TUL_SConfig);
2443                        outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */
2444                        return -1;
2445                }
2446                return int_initio_busfree(host);
2447        }
2448        /* The old code really does the below. Can probably be removed */
2449        if (host->jsint & (TSS_FUNC_COMP | TSS_BUS_SERV))
2450                return host->phase;
2451        return host->phase;
2452}
2453
2454static int initio_wait_disc(struct initio_host * host)
2455{
2456        while (!((host->jsstatus0 = inb(host->addr + TUL_SStatus0)) & TSS_INT_PENDING))
2457                cpu_relax();
2458
2459        host->jsint = inb(host->addr + TUL_SInt);
2460
2461        if (host->jsint & TSS_SCSIRST_INT)      /* if SCSI bus reset detected */
2462                return int_initio_scsi_rst(host);
2463        if (host->jsint & TSS_DISC_INT) {       /* BUS disconnection */
2464                outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */
2465                outb(TSC_INITDEFAULT, host->addr + TUL_SConfig);
2466                outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */
2467                host->active = NULL;
2468                return -1;
2469        }
2470        return initio_bad_seq(host);
2471}
2472
2473static int initio_wait_done_disc(struct initio_host * host)
2474{
2475        while (!((host->jsstatus0 = inb(host->addr + TUL_SStatus0))
2476                 & TSS_INT_PENDING))
2477                 cpu_relax();
2478
2479        host->jsint = inb(host->addr + TUL_SInt);
2480
2481        if (host->jsint & TSS_SCSIRST_INT)      /* if SCSI bus reset detected */
2482                return int_initio_scsi_rst(host);
2483        if (host->jsint & TSS_DISC_INT) {       /* BUS disconnection */
2484                outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);          /* Flush SCSI FIFO */
2485                outb(TSC_INITDEFAULT, host->addr + TUL_SConfig);
2486                outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1);         /* Enable HW reselect */
2487                initio_unlink_busy_scb(host, host->active);
2488
2489                initio_append_done_scb(host, host->active);
2490                host->active = NULL;
2491                return -1;
2492        }
2493        return initio_bad_seq(host);
2494}
2495
2496/**
2497 *      i91u_intr               -       IRQ handler
2498 *      @irqno: IRQ number
2499 *      @dev_id: IRQ identifier
2500 *
2501 *      Take the relevant locks and then invoke the actual isr processing
2502 *      code under the lock.
2503 */
2504
2505static irqreturn_t i91u_intr(int irqno, void *dev_id)
2506{
2507        struct Scsi_Host *dev = dev_id;
2508        unsigned long flags;
2509        int r;
2510        
2511        spin_lock_irqsave(dev->host_lock, flags);
2512        r = initio_isr((struct initio_host *)dev->hostdata);
2513        spin_unlock_irqrestore(dev->host_lock, flags);
2514        if (r)
2515                return IRQ_HANDLED;
2516        else
2517                return IRQ_NONE;
2518}
2519
2520
2521/**
2522 *      initio_build_scb                -       Build the mappings and SCB
2523 *      @host: InitIO host taking the command
2524 *      @cblk: Firmware command block
2525 *      @cmnd: SCSI midlayer command block
2526 *
2527 *      Translate the abstract SCSI command into a firmware command block
2528 *      suitable for feeding to the InitIO host controller. This also requires
2529 *      we build the scatter gather lists and ensure they are mapped properly.
2530 */
2531
2532static void initio_build_scb(struct initio_host * host, struct scsi_ctrl_blk * cblk, struct scsi_cmnd * cmnd)
2533{                               /* Create corresponding SCB     */
2534        struct scatterlist *sglist;
2535        struct sg_entry *sg;            /* Pointer to SG list           */
2536        int i, nseg;
2537        long total_len;
2538        dma_addr_t dma_addr;
2539
2540        /* Fill in the command headers */
2541        cblk->post = i91uSCBPost;       /* i91u's callback routine      */
2542        cblk->srb = cmnd;
2543        cblk->opcode = ExecSCSI;
2544        cblk->flags = SCF_POST; /* After SCSI done, call post routine */
2545        cblk->target = cmnd->device->id;
2546        cblk->lun = cmnd->device->lun;
2547        cblk->ident = cmnd->device->lun | DISC_ALLOW;
2548
2549        cblk->flags |= SCF_SENSE;       /* Turn on auto request sense   */
2550
2551        /* Map the sense buffer into bus memory */
2552        dma_addr = dma_map_single(&host->pci_dev->dev, cmnd->sense_buffer,
2553                                  SENSE_SIZE, DMA_FROM_DEVICE);
2554        cblk->senseptr = (u32)dma_addr;
2555        cblk->senselen = SENSE_SIZE;
2556        cmnd->SCp.ptr = (char *)(unsigned long)dma_addr;
2557        cblk->cdblen = cmnd->cmd_len;
2558
2559        /* Clear the returned status */
2560        cblk->hastat = 0;
2561        cblk->tastat = 0;
2562        /* Command the command */
2563        memcpy(cblk->cdb, cmnd->cmnd, cmnd->cmd_len);
2564
2565        /* Set up tags */
2566        if (cmnd->device->tagged_supported) {   /* Tag Support                  */
2567                cblk->tagmsg = SIMPLE_QUEUE_TAG;        /* Do simple tag only   */
2568        } else {
2569                cblk->tagmsg = 0;       /* No tag support               */
2570        }
2571
2572        /* todo handle map_sg error */
2573        nseg = scsi_dma_map(cmnd);
2574        BUG_ON(nseg < 0);
2575        if (nseg) {
2576                dma_addr = dma_map_single(&host->pci_dev->dev, &cblk->sglist[0],
2577                                          sizeof(struct sg_entry) * TOTAL_SG_ENTRY,
2578                                          DMA_BIDIRECTIONAL);
2579                cblk->bufptr = (u32)dma_addr;
2580                cmnd->SCp.dma_handle = dma_addr;
2581
2582                cblk->sglen = nseg;
2583
2584                cblk->flags |= SCF_SG;  /* Turn on SG list flag       */
2585                total_len = 0;
2586                sg = &cblk->sglist[0];
2587                scsi_for_each_sg(cmnd, sglist, cblk->sglen, i) {
2588                        sg->data = cpu_to_le32((u32)sg_dma_address(sglist));
2589                        sg->len = cpu_to_le32((u32)sg_dma_len(sglist));
2590                        total_len += sg_dma_len(sglist);
2591                        ++sg;
2592                }
2593
2594                cblk->buflen = (scsi_bufflen(cmnd) > total_len) ?
2595                        total_len : scsi_bufflen(cmnd);
2596        } else {        /* No data transfer required */
2597                cblk->buflen = 0;
2598                cblk->sglen = 0;
2599        }
2600}
2601
2602/**
2603 *      i91u_queuecommand       -       Queue a new command if possible
2604 *      @cmd: SCSI command block from the mid layer
2605 *      @done: Completion handler
2606 *
2607 *      Attempts to queue a new command with the host adapter. Will return
2608 *      zero if successful or indicate a host busy condition if not (which
2609 *      will cause the mid layer to call us again later with the command)
2610 */
2611
2612static int i91u_queuecommand_lck(struct scsi_cmnd *cmd,
2613                void (*done)(struct scsi_cmnd *))
2614{
2615        struct initio_host *host = (struct initio_host *) cmd->device->host->hostdata;
2616        struct scsi_ctrl_blk *cmnd;
2617
2618        cmd->scsi_done = done;
2619
2620        cmnd = initio_alloc_scb(host);
2621        if (!cmnd)
2622                return SCSI_MLQUEUE_HOST_BUSY;
2623
2624        initio_build_scb(host, cmnd, cmd);
2625        initio_exec_scb(host, cmnd);
2626        return 0;
2627}
2628
2629static DEF_SCSI_QCMD(i91u_queuecommand)
2630
2631/**
2632 *      i91u_bus_reset          -       reset the SCSI bus
2633 *      @cmnd: Command block we want to trigger the reset for
2634 *
2635 *      Initiate a SCSI bus reset sequence
2636 */
2637
2638static int i91u_bus_reset(struct scsi_cmnd * cmnd)
2639{
2640        struct initio_host *host;
2641
2642        host = (struct initio_host *) cmnd->device->host->hostdata;
2643
2644        spin_lock_irq(cmnd->device->host->host_lock);
2645        initio_reset_scsi(host, 0);
2646        spin_unlock_irq(cmnd->device->host->host_lock);
2647
2648        return SUCCESS;
2649}
2650
2651/**
2652 *      i91u_biospararm                 -       return the "logical geometry
2653 *      @sdev: SCSI device
2654 *      @dev; Matching block device
2655 *      @capacity: Sector size of drive
2656 *      @info_array: Return space for BIOS geometry
2657 *
2658 *      Map the device geometry in a manner compatible with the host
2659 *      controller BIOS behaviour.
2660 *
2661 *      FIXME: limited to 2^32 sector devices.
2662 */
2663
2664static int i91u_biosparam(struct scsi_device *sdev, struct block_device *dev,
2665                sector_t capacity, int *info_array)
2666{
2667        struct initio_host *host;               /* Point to Host adapter control block */
2668        struct target_control *tc;
2669
2670        host = (struct initio_host *) sdev->host->hostdata;
2671        tc = &host->targets[sdev->id];
2672
2673        if (tc->heads) {
2674                info_array[0] = tc->heads;
2675                info_array[1] = tc->sectors;
2676                info_array[2] = (unsigned long)capacity / tc->heads / tc->sectors;
2677        } else {
2678                if (tc->drv_flags & TCF_DRV_255_63) {
2679                        info_array[0] = 255;
2680                        info_array[1] = 63;
2681                        info_array[2] = (unsigned long)capacity / 255 / 63;
2682                } else {
2683                        info_array[0] = 64;
2684                        info_array[1] = 32;
2685                        info_array[2] = (unsigned long)capacity >> 11;
2686                }
2687        }
2688
2689#if defined(DEBUG_BIOSPARAM)
2690        if (i91u_debug & debug_biosparam) {
2691                printk("bios geometry: head=%d, sec=%d, cyl=%d\n",
2692                       info_array[0], info_array[1], info_array[2]);
2693                printk("WARNING: check, if the bios geometry is correct.\n");
2694        }
2695#endif
2696
2697        return 0;
2698}
2699
2700/**
2701 *      i91u_unmap_scb          -       Unmap a command
2702 *      @pci_dev: PCI device the command is for
2703 *      @cmnd: The command itself
2704 *
2705 *      Unmap any PCI mapping/IOMMU resources allocated when the command
2706 *      was mapped originally as part of initio_build_scb
2707 */
2708
2709static void i91u_unmap_scb(struct pci_dev *pci_dev, struct scsi_cmnd *cmnd)
2710{
2711        /* auto sense buffer */
2712        if (cmnd->SCp.ptr) {
2713                dma_unmap_single(&pci_dev->dev,
2714                                 (dma_addr_t)((unsigned long)cmnd->SCp.ptr),
2715                                 SENSE_SIZE, DMA_FROM_DEVICE);
2716                cmnd->SCp.ptr = NULL;
2717        }
2718
2719        /* request buffer */
2720        if (scsi_sg_count(cmnd)) {
2721                dma_unmap_single(&pci_dev->dev, cmnd->SCp.dma_handle,
2722                                 sizeof(struct sg_entry) * TOTAL_SG_ENTRY,
2723                                 DMA_BIDIRECTIONAL);
2724
2725                scsi_dma_unmap(cmnd);
2726        }
2727}
2728
2729/**
2730 *      i91uSCBPost             -       SCSI callback
2731 *      @host: Pointer to host adapter control block.
2732 *      @cmnd: Pointer to SCSI control block.
2733 *
2734 *      This is callback routine be called when tulip finish one
2735 *      SCSI command.
2736 */
2737
2738static void i91uSCBPost(u8 * host_mem, u8 * cblk_mem)
2739{
2740        struct scsi_cmnd *cmnd; /* Pointer to SCSI request block */
2741        struct initio_host *host;
2742        struct scsi_ctrl_blk *cblk;
2743
2744        host = (struct initio_host *) host_mem;
2745        cblk = (struct scsi_ctrl_blk *) cblk_mem;
2746        if ((cmnd = cblk->srb) == NULL) {
2747                printk(KERN_ERR "i91uSCBPost: SRB pointer is empty\n");
2748                WARN_ON(1);
2749                initio_release_scb(host, cblk); /* Release SCB for current channel */
2750                return;
2751        }
2752
2753        /*
2754         *      Remap the firmware error status into a mid layer one
2755         */
2756        switch (cblk->hastat) {
2757        case 0x0:
2758        case 0xa:               /* Linked command complete without error and linked normally */
2759        case 0xb:               /* Linked command complete without error interrupt generated */
2760                cblk->hastat = 0;
2761                break;
2762
2763        case 0x11:              /* Selection time out-The initiator selection or target
2764                                   reselection was not complete within the SCSI Time out period */
2765                cblk->hastat = DID_TIME_OUT;
2766                break;
2767
2768        case 0x14:              /* Target bus phase sequence failure-An invalid bus phase or bus
2769                                   phase sequence was requested by the target. The host adapter
2770                                   will generate a SCSI Reset Condition, notifying the host with
2771                                   a SCRD interrupt */
2772                cblk->hastat = DID_RESET;
2773                break;
2774
2775        case 0x1a:              /* SCB Aborted. 07/21/98 */
2776                cblk->hastat = DID_ABORT;
2777                break;
2778
2779        case 0x12:              /* Data overrun/underrun-The target attempted to transfer more data
2780                                   than was allocated by the Data Length field or the sum of the
2781                                   Scatter / Gather Data Length fields. */
2782        case 0x13:              /* Unexpected bus free-The target dropped the SCSI BSY at an unexpected time. */
2783        case 0x16:              /* Invalid SCB Operation Code. */
2784
2785        default:
2786                printk("ini9100u: %x %x\n", cblk->hastat, cblk->tastat);
2787                cblk->hastat = DID_ERROR;       /* Couldn't find any better */
2788                break;
2789        }
2790
2791        cmnd->result = cblk->tastat | (cblk->hastat << 16);
2792        i91u_unmap_scb(host->pci_dev, cmnd);
2793        cmnd->scsi_done(cmnd);  /* Notify system DONE           */
2794        initio_release_scb(host, cblk); /* Release SCB for current channel */
2795}
2796
2797static struct scsi_host_template initio_template = {
2798        .proc_name              = "INI9100U",
2799        .name                   = "Initio INI-9X00U/UW SCSI device driver",
2800        .queuecommand           = i91u_queuecommand,
2801        .eh_bus_reset_handler   = i91u_bus_reset,
2802        .bios_param             = i91u_biosparam,
2803        .can_queue              = MAX_TARGETS * i91u_MAXQUEUE,
2804        .this_id                = 1,
2805        .sg_tablesize           = SG_ALL,
2806};
2807
2808static int initio_probe_one(struct pci_dev *pdev,
2809        const struct pci_device_id *id)
2810{
2811        struct Scsi_Host *shost;
2812        struct initio_host *host;
2813        u32 reg;
2814        u16 bios_seg;
2815        struct scsi_ctrl_blk *scb, *tmp, *prev = NULL /* silence gcc */;
2816        int num_scb, i, error;
2817
2818        error = pci_enable_device(pdev);
2819        if (error)
2820                return error;
2821
2822        pci_read_config_dword(pdev, 0x44, (u32 *) & reg);
2823        bios_seg = (u16) (reg & 0xFF);
2824        if (((reg & 0xFF00) >> 8) == 0xFF)
2825                reg = 0;
2826        bios_seg = (bios_seg << 8) + ((u16) ((reg & 0xFF00) >> 8));
2827
2828        if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) {
2829                printk(KERN_WARNING  "i91u: Could not set 32 bit DMA mask\n");
2830                error = -ENODEV;
2831                goto out_disable_device;
2832        }
2833        shost = scsi_host_alloc(&initio_template, sizeof(struct initio_host));
2834        if (!shost) {
2835                printk(KERN_WARNING "initio: Could not allocate host structure.\n");
2836                error = -ENOMEM;
2837                goto out_disable_device;
2838        }
2839        host = (struct initio_host *)shost->hostdata;
2840        memset(host, 0, sizeof(struct initio_host));
2841        host->addr = pci_resource_start(pdev, 0);
2842        host->bios_addr = bios_seg;
2843
2844        if (!request_region(host->addr, 256, "i91u")) {
2845                printk(KERN_WARNING "initio: I/O port range 0x%x is busy.\n", host->addr);
2846                error = -ENODEV;
2847                goto out_host_put;
2848        }
2849
2850        if (initio_tag_enable)  /* 1.01i */
2851                num_scb = MAX_TARGETS * i91u_MAXQUEUE;
2852        else
2853                num_scb = MAX_TARGETS + 3;      /* 1-tape, 1-CD_ROM, 1- extra */
2854
2855        for (; num_scb >= MAX_TARGETS + 3; num_scb--) {
2856                i = num_scb * sizeof(struct scsi_ctrl_blk);
2857                if ((scb = kzalloc(i, GFP_DMA)) != NULL)
2858                        break;
2859        }
2860
2861        if (!scb) {
2862                printk(KERN_WARNING "initio: Cannot allocate SCB array.\n");
2863                error = -ENOMEM;
2864                goto out_release_region;
2865        }
2866
2867        host->pci_dev = pdev;
2868
2869        host->semaph = 1;
2870        spin_lock_init(&host->semaph_lock);
2871        host->num_scbs = num_scb;
2872        host->scb = scb;
2873        host->next_pending = scb;
2874        host->next_avail = scb;
2875        for (i = 0, tmp = scb; i < num_scb; i++, tmp++) {
2876                tmp->tagid = i;
2877                if (i != 0)
2878                        prev->next = tmp;
2879                prev = tmp;
2880        }
2881        prev->next = NULL;
2882        host->scb_end = tmp;
2883        host->first_avail = scb;
2884        host->last_avail = prev;
2885        spin_lock_init(&host->avail_lock);
2886
2887        initio_init(host, phys_to_virt(((u32)bios_seg << 4)));
2888
2889        host->jsstatus0 = 0;
2890
2891        shost->io_port = host->addr;
2892        shost->n_io_port = 0xff;
2893        shost->can_queue = num_scb;             /* 03/05/98                      */
2894        shost->unique_id = host->addr;
2895        shost->max_id = host->max_tar;
2896        shost->max_lun = 32;    /* 10/21/97                     */
2897        shost->irq = pdev->irq;
2898        shost->this_id = host->scsi_id; /* Assign HCS index           */
2899        shost->base = host->addr;
2900        shost->sg_tablesize = TOTAL_SG_ENTRY;
2901
2902        error = request_irq(pdev->irq, i91u_intr, IRQF_SHARED, "i91u", shost);
2903        if (error < 0) {
2904                printk(KERN_WARNING "initio: Unable to request IRQ %d\n", pdev->irq);
2905                goto out_free_scbs;
2906        }
2907
2908        pci_set_drvdata(pdev, shost);
2909
2910        error = scsi_add_host(shost, &pdev->dev);
2911        if (error)
2912                goto out_free_irq;
2913        scsi_scan_host(shost);
2914        return 0;
2915out_free_irq:
2916        free_irq(pdev->irq, shost);
2917out_free_scbs:
2918        kfree(host->scb);
2919out_release_region:
2920        release_region(host->addr, 256);
2921out_host_put:
2922        scsi_host_put(shost);
2923out_disable_device:
2924        pci_disable_device(pdev);
2925        return error;
2926}
2927
2928/**
2929 *      initio_remove_one       -       control shutdown
2930 *      @pdev:  PCI device being released
2931 *
2932 *      Release the resources assigned to this adapter after it has
2933 *      finished being used.
2934 */
2935
2936static void initio_remove_one(struct pci_dev *pdev)
2937{
2938        struct Scsi_Host *host = pci_get_drvdata(pdev);
2939        struct initio_host *s = (struct initio_host *)host->hostdata;
2940        scsi_remove_host(host);
2941        free_irq(pdev->irq, host);
2942        release_region(s->addr, 256);
2943        scsi_host_put(host);
2944        pci_disable_device(pdev);
2945}
2946
2947MODULE_LICENSE("GPL");
2948
2949static struct pci_device_id initio_pci_tbl[] = {
2950        {PCI_VENDOR_ID_INIT, 0x9500, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
2951        {PCI_VENDOR_ID_INIT, 0x9400, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
2952        {PCI_VENDOR_ID_INIT, 0x9401, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
2953        {PCI_VENDOR_ID_INIT, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
2954        {PCI_VENDOR_ID_DOMEX, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
2955        {0,}
2956};
2957MODULE_DEVICE_TABLE(pci, initio_pci_tbl);
2958
2959static struct pci_driver initio_pci_driver = {
2960        .name           = "initio",
2961        .id_table       = initio_pci_tbl,
2962        .probe          = initio_probe_one,
2963        .remove         = initio_remove_one,
2964};
2965
2966static int __init initio_init_driver(void)
2967{
2968        return pci_register_driver(&initio_pci_driver);
2969}
2970
2971static void __exit initio_exit_driver(void)
2972{
2973        pci_unregister_driver(&initio_pci_driver);
2974}
2975
2976MODULE_DESCRIPTION("Initio INI-9X00U/UW SCSI device driver");
2977MODULE_AUTHOR("Initio Corporation");
2978MODULE_LICENSE("GPL");
2979
2980module_init(initio_init_driver);
2981module_exit(initio_exit_driver);
2982