linux/drivers/scsi/libfc/fc_fcp.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-only
   2/*
   3 * Copyright(c) 2007 Intel Corporation. All rights reserved.
   4 * Copyright(c) 2008 Red Hat, Inc.  All rights reserved.
   5 * Copyright(c) 2008 Mike Christie
   6 *
   7 * Maintained at www.Open-FCoE.org
   8 */
   9
  10#include <linux/module.h>
  11#include <linux/delay.h>
  12#include <linux/kernel.h>
  13#include <linux/types.h>
  14#include <linux/spinlock.h>
  15#include <linux/scatterlist.h>
  16#include <linux/err.h>
  17#include <linux/crc32.h>
  18#include <linux/slab.h>
  19
  20#include <scsi/scsi_tcq.h>
  21#include <scsi/scsi.h>
  22#include <scsi/scsi_host.h>
  23#include <scsi/scsi_device.h>
  24#include <scsi/scsi_cmnd.h>
  25
  26#include <scsi/fc/fc_fc2.h>
  27
  28#include <scsi/libfc.h>
  29#include <scsi/fc_encode.h>
  30
  31#include "fc_libfc.h"
  32
  33static struct kmem_cache *scsi_pkt_cachep;
  34
  35/* SRB state definitions */
  36#define FC_SRB_FREE             0               /* cmd is free */
  37#define FC_SRB_CMD_SENT         (1 << 0)        /* cmd has been sent */
  38#define FC_SRB_RCV_STATUS       (1 << 1)        /* response has arrived */
  39#define FC_SRB_ABORT_PENDING    (1 << 2)        /* cmd abort sent to device */
  40#define FC_SRB_ABORTED          (1 << 3)        /* abort acknowledged */
  41#define FC_SRB_DISCONTIG        (1 << 4)        /* non-sequential data recvd */
  42#define FC_SRB_COMPL            (1 << 5)        /* fc_io_compl has been run */
  43#define FC_SRB_FCP_PROCESSING_TMO (1 << 6)      /* timer function processing */
  44
  45#define FC_SRB_READ             (1 << 1)
  46#define FC_SRB_WRITE            (1 << 0)
  47
  48/*
  49 * The SCp.ptr should be tested and set under the scsi_pkt_queue lock
  50 */
  51#define CMD_SP(Cmnd)                ((struct fc_fcp_pkt *)(Cmnd)->SCp.ptr)
  52#define CMD_ENTRY_STATUS(Cmnd)      ((Cmnd)->SCp.have_data_in)
  53#define CMD_COMPL_STATUS(Cmnd)      ((Cmnd)->SCp.this_residual)
  54#define CMD_SCSI_STATUS(Cmnd)       ((Cmnd)->SCp.Status)
  55#define CMD_RESID_LEN(Cmnd)         ((Cmnd)->SCp.buffers_residual)
  56
  57/**
  58 * struct fc_fcp_internal - FCP layer internal data
  59 * @scsi_pkt_pool: Memory pool to draw FCP packets from
  60 * @scsi_queue_lock: Protects the scsi_pkt_queue
  61 * @scsi_pkt_queue: Current FCP packets
  62 * @last_can_queue_ramp_down_time: ramp down time
  63 * @last_can_queue_ramp_up_time: ramp up time
  64 * @max_can_queue: max can_queue size
  65 */
  66struct fc_fcp_internal {
  67        mempool_t               *scsi_pkt_pool;
  68        spinlock_t              scsi_queue_lock;
  69        struct list_head        scsi_pkt_queue;
  70        unsigned long           last_can_queue_ramp_down_time;
  71        unsigned long           last_can_queue_ramp_up_time;
  72        int                     max_can_queue;
  73};
  74
  75#define fc_get_scsi_internal(x) ((struct fc_fcp_internal *)(x)->scsi_priv)
  76
  77/*
  78 * function prototypes
  79 * FC scsi I/O related functions
  80 */
  81static void fc_fcp_recv_data(struct fc_fcp_pkt *, struct fc_frame *);
  82static void fc_fcp_recv(struct fc_seq *, struct fc_frame *, void *);
  83static void fc_fcp_resp(struct fc_fcp_pkt *, struct fc_frame *);
  84static void fc_fcp_complete_locked(struct fc_fcp_pkt *);
  85static void fc_tm_done(struct fc_seq *, struct fc_frame *, void *);
  86static void fc_fcp_error(struct fc_fcp_pkt *, struct fc_frame *);
  87static void fc_fcp_recovery(struct fc_fcp_pkt *, u8 code);
  88static void fc_fcp_timeout(struct timer_list *);
  89static void fc_fcp_rec(struct fc_fcp_pkt *);
  90static void fc_fcp_rec_error(struct fc_fcp_pkt *, struct fc_frame *);
  91static void fc_fcp_rec_resp(struct fc_seq *, struct fc_frame *, void *);
  92static void fc_io_compl(struct fc_fcp_pkt *);
  93
  94static void fc_fcp_srr(struct fc_fcp_pkt *, enum fc_rctl, u32);
  95static void fc_fcp_srr_resp(struct fc_seq *, struct fc_frame *, void *);
  96static void fc_fcp_srr_error(struct fc_fcp_pkt *, struct fc_frame *);
  97
  98/*
  99 * command status codes
 100 */
 101#define FC_COMPLETE             0
 102#define FC_CMD_ABORTED          1
 103#define FC_CMD_RESET            2
 104#define FC_CMD_PLOGO            3
 105#define FC_SNS_RCV              4
 106#define FC_TRANS_ERR            5
 107#define FC_DATA_OVRRUN          6
 108#define FC_DATA_UNDRUN          7
 109#define FC_ERROR                8
 110#define FC_HRD_ERROR            9
 111#define FC_CRC_ERROR            10
 112#define FC_TIMED_OUT            11
 113#define FC_TRANS_RESET          12
 114
 115/*
 116 * Error recovery timeout values.
 117 */
 118#define FC_SCSI_TM_TOV          (10 * HZ)
 119#define FC_HOST_RESET_TIMEOUT   (30 * HZ)
 120#define FC_CAN_QUEUE_PERIOD     (60 * HZ)
 121
 122#define FC_MAX_ERROR_CNT        5
 123#define FC_MAX_RECOV_RETRY      3
 124
 125#define FC_FCP_DFLT_QUEUE_DEPTH 32
 126
 127/**
 128 * fc_fcp_pkt_alloc() - Allocate a fcp_pkt
 129 * @lport: The local port that the FCP packet is for
 130 * @gfp:   GFP flags for allocation
 131 *
 132 * Return value: fcp_pkt structure or null on allocation failure.
 133 * Context:      Can be called from process context, no lock is required.
 134 */
 135static struct fc_fcp_pkt *fc_fcp_pkt_alloc(struct fc_lport *lport, gfp_t gfp)
 136{
 137        struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
 138        struct fc_fcp_pkt *fsp;
 139
 140        fsp = mempool_alloc(si->scsi_pkt_pool, gfp);
 141        if (fsp) {
 142                memset(fsp, 0, sizeof(*fsp));
 143                fsp->lp = lport;
 144                fsp->xfer_ddp = FC_XID_UNKNOWN;
 145                refcount_set(&fsp->ref_cnt, 1);
 146                timer_setup(&fsp->timer, NULL, 0);
 147                INIT_LIST_HEAD(&fsp->list);
 148                spin_lock_init(&fsp->scsi_pkt_lock);
 149        } else {
 150                per_cpu_ptr(lport->stats, get_cpu())->FcpPktAllocFails++;
 151                put_cpu();
 152        }
 153        return fsp;
 154}
 155
 156/**
 157 * fc_fcp_pkt_release() - Release hold on a fcp_pkt
 158 * @fsp: The FCP packet to be released
 159 *
 160 * Context: Can be called from process or interrupt context,
 161 *          no lock is required.
 162 */
 163static void fc_fcp_pkt_release(struct fc_fcp_pkt *fsp)
 164{
 165        if (refcount_dec_and_test(&fsp->ref_cnt)) {
 166                struct fc_fcp_internal *si = fc_get_scsi_internal(fsp->lp);
 167
 168                mempool_free(fsp, si->scsi_pkt_pool);
 169        }
 170}
 171
 172/**
 173 * fc_fcp_pkt_hold() - Hold a fcp_pkt
 174 * @fsp: The FCP packet to be held
 175 */
 176static void fc_fcp_pkt_hold(struct fc_fcp_pkt *fsp)
 177{
 178        refcount_inc(&fsp->ref_cnt);
 179}
 180
 181/**
 182 * fc_fcp_pkt_destroy() - Release hold on a fcp_pkt
 183 * @seq: The sequence that the FCP packet is on (required by destructor API)
 184 * @fsp: The FCP packet to be released
 185 *
 186 * This routine is called by a destructor callback in the fc_exch_seq_send()
 187 * routine of the libfc Transport Template. The 'struct fc_seq' is a required
 188 * argument even though it is not used by this routine.
 189 *
 190 * Context: No locking required.
 191 */
 192static void fc_fcp_pkt_destroy(struct fc_seq *seq, void *fsp)
 193{
 194        fc_fcp_pkt_release(fsp);
 195}
 196
 197/**
 198 * fc_fcp_lock_pkt() - Lock a fcp_pkt and increase its reference count
 199 * @fsp: The FCP packet to be locked and incremented
 200 *
 201 * We should only return error if we return a command to SCSI-ml before
 202 * getting a response. This can happen in cases where we send a abort, but
 203 * do not wait for the response and the abort and command can be passing
 204 * each other on the wire/network-layer.
 205 *
 206 * Note: this function locks the packet and gets a reference to allow
 207 * callers to call the completion function while the lock is held and
 208 * not have to worry about the packets refcount.
 209 *
 210 * TODO: Maybe we should just have callers grab/release the lock and
 211 * have a function that they call to verify the fsp and grab a ref if
 212 * needed.
 213 */
 214static inline int fc_fcp_lock_pkt(struct fc_fcp_pkt *fsp)
 215{
 216        spin_lock_bh(&fsp->scsi_pkt_lock);
 217        if (fsp->state & FC_SRB_COMPL) {
 218                spin_unlock_bh(&fsp->scsi_pkt_lock);
 219                return -EPERM;
 220        }
 221
 222        fc_fcp_pkt_hold(fsp);
 223        return 0;
 224}
 225
 226/**
 227 * fc_fcp_unlock_pkt() - Release a fcp_pkt's lock and decrement its
 228 *                       reference count
 229 * @fsp: The FCP packet to be unlocked and decremented
 230 */
 231static inline void fc_fcp_unlock_pkt(struct fc_fcp_pkt *fsp)
 232{
 233        spin_unlock_bh(&fsp->scsi_pkt_lock);
 234        fc_fcp_pkt_release(fsp);
 235}
 236
 237/**
 238 * fc_fcp_timer_set() - Start a timer for a fcp_pkt
 239 * @fsp:   The FCP packet to start a timer for
 240 * @delay: The timeout period in jiffies
 241 */
 242static void fc_fcp_timer_set(struct fc_fcp_pkt *fsp, unsigned long delay)
 243{
 244        if (!(fsp->state & FC_SRB_COMPL)) {
 245                mod_timer(&fsp->timer, jiffies + delay);
 246                fsp->timer_delay = delay;
 247        }
 248}
 249
 250static void fc_fcp_abort_done(struct fc_fcp_pkt *fsp)
 251{
 252        fsp->state |= FC_SRB_ABORTED;
 253        fsp->state &= ~FC_SRB_ABORT_PENDING;
 254
 255        if (fsp->wait_for_comp)
 256                complete(&fsp->tm_done);
 257        else
 258                fc_fcp_complete_locked(fsp);
 259}
 260
 261/**
 262 * fc_fcp_send_abort() - Send an abort for exchanges associated with a
 263 *                       fcp_pkt
 264 * @fsp: The FCP packet to abort exchanges on
 265 */
 266static int fc_fcp_send_abort(struct fc_fcp_pkt *fsp)
 267{
 268        int rc;
 269
 270        if (!fsp->seq_ptr)
 271                return -EINVAL;
 272
 273        per_cpu_ptr(fsp->lp->stats, get_cpu())->FcpPktAborts++;
 274        put_cpu();
 275
 276        fsp->state |= FC_SRB_ABORT_PENDING;
 277        rc = fc_seq_exch_abort(fsp->seq_ptr, 0);
 278        /*
 279         * fc_seq_exch_abort() might return -ENXIO if
 280         * the sequence is already completed
 281         */
 282        if (rc == -ENXIO) {
 283                fc_fcp_abort_done(fsp);
 284                rc = 0;
 285        }
 286        return rc;
 287}
 288
 289/**
 290 * fc_fcp_retry_cmd() - Retry a fcp_pkt
 291 * @fsp: The FCP packet to be retried
 292 *
 293 * Sets the status code to be FC_ERROR and then calls
 294 * fc_fcp_complete_locked() which in turn calls fc_io_compl().
 295 * fc_io_compl() will notify the SCSI-ml that the I/O is done.
 296 * The SCSI-ml will retry the command.
 297 */
 298static void fc_fcp_retry_cmd(struct fc_fcp_pkt *fsp, int status_code)
 299{
 300        if (fsp->seq_ptr) {
 301                fc_exch_done(fsp->seq_ptr);
 302                fsp->seq_ptr = NULL;
 303        }
 304
 305        fsp->state &= ~FC_SRB_ABORT_PENDING;
 306        fsp->io_status = 0;
 307        fsp->status_code = status_code;
 308        fc_fcp_complete_locked(fsp);
 309}
 310
 311/**
 312 * fc_fcp_ddp_setup() - Calls a LLD's ddp_setup routine to set up DDP context
 313 * @fsp: The FCP packet that will manage the DDP frames
 314 * @xid: The XID that will be used for the DDP exchange
 315 */
 316void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid)
 317{
 318        struct fc_lport *lport;
 319
 320        lport = fsp->lp;
 321        if ((fsp->req_flags & FC_SRB_READ) &&
 322            (lport->lro_enabled) && (lport->tt.ddp_setup)) {
 323                if (lport->tt.ddp_setup(lport, xid, scsi_sglist(fsp->cmd),
 324                                        scsi_sg_count(fsp->cmd)))
 325                        fsp->xfer_ddp = xid;
 326        }
 327}
 328
 329/**
 330 * fc_fcp_ddp_done() - Calls a LLD's ddp_done routine to release any
 331 *                     DDP related resources for a fcp_pkt
 332 * @fsp: The FCP packet that DDP had been used on
 333 */
 334void fc_fcp_ddp_done(struct fc_fcp_pkt *fsp)
 335{
 336        struct fc_lport *lport;
 337
 338        if (!fsp)
 339                return;
 340
 341        if (fsp->xfer_ddp == FC_XID_UNKNOWN)
 342                return;
 343
 344        lport = fsp->lp;
 345        if (lport->tt.ddp_done) {
 346                fsp->xfer_len = lport->tt.ddp_done(lport, fsp->xfer_ddp);
 347                fsp->xfer_ddp = FC_XID_UNKNOWN;
 348        }
 349}
 350
 351/**
 352 * fc_fcp_can_queue_ramp_up() - increases can_queue
 353 * @lport: lport to ramp up can_queue
 354 */
 355static void fc_fcp_can_queue_ramp_up(struct fc_lport *lport)
 356{
 357        struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
 358        unsigned long flags;
 359        int can_queue;
 360
 361        spin_lock_irqsave(lport->host->host_lock, flags);
 362
 363        if (si->last_can_queue_ramp_up_time &&
 364            (time_before(jiffies, si->last_can_queue_ramp_up_time +
 365                         FC_CAN_QUEUE_PERIOD)))
 366                goto unlock;
 367
 368        if (time_before(jiffies, si->last_can_queue_ramp_down_time +
 369                        FC_CAN_QUEUE_PERIOD))
 370                goto unlock;
 371
 372        si->last_can_queue_ramp_up_time = jiffies;
 373
 374        can_queue = lport->host->can_queue << 1;
 375        if (can_queue >= si->max_can_queue) {
 376                can_queue = si->max_can_queue;
 377                si->last_can_queue_ramp_down_time = 0;
 378        }
 379        lport->host->can_queue = can_queue;
 380        shost_printk(KERN_ERR, lport->host, "libfc: increased "
 381                     "can_queue to %d.\n", can_queue);
 382
 383unlock:
 384        spin_unlock_irqrestore(lport->host->host_lock, flags);
 385}
 386
 387/**
 388 * fc_fcp_can_queue_ramp_down() - reduces can_queue
 389 * @lport: lport to reduce can_queue
 390 *
 391 * If we are getting memory allocation failures, then we may
 392 * be trying to execute too many commands. We let the running
 393 * commands complete or timeout, then try again with a reduced
 394 * can_queue. Eventually we will hit the point where we run
 395 * on all reserved structs.
 396 */
 397static bool fc_fcp_can_queue_ramp_down(struct fc_lport *lport)
 398{
 399        struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
 400        unsigned long flags;
 401        int can_queue;
 402        bool changed = false;
 403
 404        spin_lock_irqsave(lport->host->host_lock, flags);
 405
 406        if (si->last_can_queue_ramp_down_time &&
 407            (time_before(jiffies, si->last_can_queue_ramp_down_time +
 408                         FC_CAN_QUEUE_PERIOD)))
 409                goto unlock;
 410
 411        si->last_can_queue_ramp_down_time = jiffies;
 412
 413        can_queue = lport->host->can_queue;
 414        can_queue >>= 1;
 415        if (!can_queue)
 416                can_queue = 1;
 417        lport->host->can_queue = can_queue;
 418        changed = true;
 419
 420unlock:
 421        spin_unlock_irqrestore(lport->host->host_lock, flags);
 422        return changed;
 423}
 424
 425/*
 426 * fc_fcp_frame_alloc() -  Allocates fc_frame structure and buffer.
 427 * @lport:      fc lport struct
 428 * @len:        payload length
 429 *
 430 * Allocates fc_frame structure and buffer but if fails to allocate
 431 * then reduce can_queue.
 432 */
 433static inline struct fc_frame *fc_fcp_frame_alloc(struct fc_lport *lport,
 434                                                  size_t len)
 435{
 436        struct fc_frame *fp;
 437
 438        fp = fc_frame_alloc(lport, len);
 439        if (likely(fp))
 440                return fp;
 441
 442        per_cpu_ptr(lport->stats, get_cpu())->FcpFrameAllocFails++;
 443        put_cpu();
 444        /* error case */
 445        fc_fcp_can_queue_ramp_down(lport);
 446        shost_printk(KERN_ERR, lport->host,
 447                     "libfc: Could not allocate frame, "
 448                     "reducing can_queue to %d.\n", lport->host->can_queue);
 449        return NULL;
 450}
 451
 452/**
 453 * get_fsp_rec_tov() - Helper function to get REC_TOV
 454 * @fsp: the FCP packet
 455 *
 456 * Returns rec tov in jiffies as rpriv->e_d_tov + 1 second
 457 */
 458static inline unsigned int get_fsp_rec_tov(struct fc_fcp_pkt *fsp)
 459{
 460        struct fc_rport_libfc_priv *rpriv = fsp->rport->dd_data;
 461        unsigned int e_d_tov = FC_DEF_E_D_TOV;
 462
 463        if (rpriv && rpriv->e_d_tov > e_d_tov)
 464                e_d_tov = rpriv->e_d_tov;
 465        return msecs_to_jiffies(e_d_tov) + HZ;
 466}
 467
 468/**
 469 * fc_fcp_recv_data() - Handler for receiving SCSI-FCP data from a target
 470 * @fsp: The FCP packet the data is on
 471 * @fp:  The data frame
 472 */
 473static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
 474{
 475        struct scsi_cmnd *sc = fsp->cmd;
 476        struct fc_lport *lport = fsp->lp;
 477        struct fc_stats *stats;
 478        struct fc_frame_header *fh;
 479        size_t start_offset;
 480        size_t offset;
 481        u32 crc;
 482        u32 copy_len = 0;
 483        size_t len;
 484        void *buf;
 485        struct scatterlist *sg;
 486        u32 nents;
 487        u8 host_bcode = FC_COMPLETE;
 488
 489        fh = fc_frame_header_get(fp);
 490        offset = ntohl(fh->fh_parm_offset);
 491        start_offset = offset;
 492        len = fr_len(fp) - sizeof(*fh);
 493        buf = fc_frame_payload_get(fp, 0);
 494
 495        /*
 496         * if this I/O is ddped then clear it and initiate recovery since data
 497         * frames are expected to be placed directly in that case.
 498         *
 499         * Indicate error to scsi-ml because something went wrong with the
 500         * ddp handling to get us here.
 501         */
 502        if (fsp->xfer_ddp != FC_XID_UNKNOWN) {
 503                fc_fcp_ddp_done(fsp);
 504                FC_FCP_DBG(fsp, "DDP I/O in fc_fcp_recv_data set ERROR\n");
 505                host_bcode = FC_ERROR;
 506                goto err;
 507        }
 508        if (offset + len > fsp->data_len) {
 509                /* this should never happen */
 510                if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) &&
 511                    fc_frame_crc_check(fp))
 512                        goto crc_err;
 513                FC_FCP_DBG(fsp, "data received past end. len %zx offset %zx "
 514                           "data_len %x\n", len, offset, fsp->data_len);
 515
 516                /* Data is corrupted indicate scsi-ml should retry */
 517                host_bcode = FC_DATA_OVRRUN;
 518                goto err;
 519        }
 520        if (offset != fsp->xfer_len)
 521                fsp->state |= FC_SRB_DISCONTIG;
 522
 523        sg = scsi_sglist(sc);
 524        nents = scsi_sg_count(sc);
 525
 526        if (!(fr_flags(fp) & FCPHF_CRC_UNCHECKED)) {
 527                copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
 528                                                    &offset, NULL);
 529        } else {
 530                crc = crc32(~0, (u8 *) fh, sizeof(*fh));
 531                copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
 532                                                    &offset, &crc);
 533                buf = fc_frame_payload_get(fp, 0);
 534                if (len % 4)
 535                        crc = crc32(crc, buf + len, 4 - (len % 4));
 536
 537                if (~crc != le32_to_cpu(fr_crc(fp))) {
 538crc_err:
 539                        stats = per_cpu_ptr(lport->stats, get_cpu());
 540                        stats->ErrorFrames++;
 541                        /* per cpu count, not total count, but OK for limit */
 542                        if (stats->InvalidCRCCount++ < FC_MAX_ERROR_CNT)
 543                                printk(KERN_WARNING "libfc: CRC error on data "
 544                                       "frame for port (%6.6x)\n",
 545                                       lport->port_id);
 546                        put_cpu();
 547                        /*
 548                         * Assume the frame is total garbage.
 549                         * We may have copied it over the good part
 550                         * of the buffer.
 551                         * If so, we need to retry the entire operation.
 552                         * Otherwise, ignore it.
 553                         */
 554                        if (fsp->state & FC_SRB_DISCONTIG) {
 555                                host_bcode = FC_CRC_ERROR;
 556                                goto err;
 557                        }
 558                        return;
 559                }
 560        }
 561
 562        if (fsp->xfer_contig_end == start_offset)
 563                fsp->xfer_contig_end += copy_len;
 564        fsp->xfer_len += copy_len;
 565
 566        /*
 567         * In the very rare event that this data arrived after the response
 568         * and completes the transfer, call the completion handler.
 569         */
 570        if (unlikely(fsp->state & FC_SRB_RCV_STATUS) &&
 571            fsp->xfer_len == fsp->data_len - fsp->scsi_resid) {
 572                FC_FCP_DBG( fsp, "complete out-of-order sequence\n" );
 573                fc_fcp_complete_locked(fsp);
 574        }
 575        return;
 576err:
 577        fc_fcp_recovery(fsp, host_bcode);
 578}
 579
 580/**
 581 * fc_fcp_send_data() - Send SCSI data to a target
 582 * @fsp:      The FCP packet the data is on
 583 * @sp:       The sequence the data is to be sent on
 584 * @offset:   The starting offset for this data request
 585 * @seq_blen: The burst length for this data request
 586 *
 587 * Called after receiving a Transfer Ready data descriptor.
 588 * If the LLD is capable of sequence offload then send down the
 589 * seq_blen amount of data in single frame, otherwise send
 590 * multiple frames of the maximum frame payload supported by
 591 * the target port.
 592 */
 593static int fc_fcp_send_data(struct fc_fcp_pkt *fsp, struct fc_seq *seq,
 594                            size_t offset, size_t seq_blen)
 595{
 596        struct fc_exch *ep;
 597        struct scsi_cmnd *sc;
 598        struct scatterlist *sg;
 599        struct fc_frame *fp = NULL;
 600        struct fc_lport *lport = fsp->lp;
 601        struct page *page;
 602        size_t remaining;
 603        size_t t_blen;
 604        size_t tlen;
 605        size_t sg_bytes;
 606        size_t frame_offset, fh_parm_offset;
 607        size_t off;
 608        int error;
 609        void *data = NULL;
 610        void *page_addr;
 611        int using_sg = lport->sg_supp;
 612        u32 f_ctl;
 613
 614        WARN_ON(seq_blen <= 0);
 615        if (unlikely(offset + seq_blen > fsp->data_len)) {
 616                /* this should never happen */
 617                FC_FCP_DBG(fsp, "xfer-ready past end. seq_blen %zx "
 618                           "offset %zx\n", seq_blen, offset);
 619                fc_fcp_send_abort(fsp);
 620                return 0;
 621        } else if (offset != fsp->xfer_len) {
 622                /* Out of Order Data Request - no problem, but unexpected. */
 623                FC_FCP_DBG(fsp, "xfer-ready non-contiguous. "
 624                           "seq_blen %zx offset %zx\n", seq_blen, offset);
 625        }
 626
 627        /*
 628         * if LLD is capable of seq_offload then set transport
 629         * burst length (t_blen) to seq_blen, otherwise set t_blen
 630         * to max FC frame payload previously set in fsp->max_payload.
 631         */
 632        t_blen = fsp->max_payload;
 633        if (lport->seq_offload) {
 634                t_blen = min(seq_blen, (size_t)lport->lso_max);
 635                FC_FCP_DBG(fsp, "fsp=%p:lso:blen=%zx lso_max=0x%x t_blen=%zx\n",
 636                           fsp, seq_blen, lport->lso_max, t_blen);
 637        }
 638
 639        if (t_blen > 512)
 640                t_blen &= ~(512 - 1);   /* round down to block size */
 641        sc = fsp->cmd;
 642
 643        remaining = seq_blen;
 644        fh_parm_offset = frame_offset = offset;
 645        tlen = 0;
 646        seq = fc_seq_start_next(seq);
 647        f_ctl = FC_FC_REL_OFF;
 648        WARN_ON(!seq);
 649
 650        sg = scsi_sglist(sc);
 651
 652        while (remaining > 0 && sg) {
 653                if (offset >= sg->length) {
 654                        offset -= sg->length;
 655                        sg = sg_next(sg);
 656                        continue;
 657                }
 658                if (!fp) {
 659                        tlen = min(t_blen, remaining);
 660
 661                        /*
 662                         * TODO.  Temporary workaround.  fc_seq_send() can't
 663                         * handle odd lengths in non-linear skbs.
 664                         * This will be the final fragment only.
 665                         */
 666                        if (tlen % 4)
 667                                using_sg = 0;
 668                        fp = fc_frame_alloc(lport, using_sg ? 0 : tlen);
 669                        if (!fp)
 670                                return -ENOMEM;
 671
 672                        data = fc_frame_header_get(fp) + 1;
 673                        fh_parm_offset = frame_offset;
 674                        fr_max_payload(fp) = fsp->max_payload;
 675                }
 676
 677                off = offset + sg->offset;
 678                sg_bytes = min(tlen, sg->length - offset);
 679                sg_bytes = min(sg_bytes,
 680                               (size_t) (PAGE_SIZE - (off & ~PAGE_MASK)));
 681                page = sg_page(sg) + (off >> PAGE_SHIFT);
 682                if (using_sg) {
 683                        get_page(page);
 684                        skb_fill_page_desc(fp_skb(fp),
 685                                           skb_shinfo(fp_skb(fp))->nr_frags,
 686                                           page, off & ~PAGE_MASK, sg_bytes);
 687                        fp_skb(fp)->data_len += sg_bytes;
 688                        fr_len(fp) += sg_bytes;
 689                        fp_skb(fp)->truesize += PAGE_SIZE;
 690                } else {
 691                        /*
 692                         * The scatterlist item may be bigger than PAGE_SIZE,
 693                         * but we must not cross pages inside the kmap.
 694                         */
 695                        page_addr = kmap_atomic(page);
 696                        memcpy(data, (char *)page_addr + (off & ~PAGE_MASK),
 697                               sg_bytes);
 698                        kunmap_atomic(page_addr);
 699                        data += sg_bytes;
 700                }
 701                offset += sg_bytes;
 702                frame_offset += sg_bytes;
 703                tlen -= sg_bytes;
 704                remaining -= sg_bytes;
 705
 706                if ((skb_shinfo(fp_skb(fp))->nr_frags < FC_FRAME_SG_LEN) &&
 707                    (tlen))
 708                        continue;
 709
 710                /*
 711                 * Send sequence with transfer sequence initiative in case
 712                 * this is last FCP frame of the sequence.
 713                 */
 714                if (remaining == 0)
 715                        f_ctl |= FC_FC_SEQ_INIT | FC_FC_END_SEQ;
 716
 717                ep = fc_seq_exch(seq);
 718                fc_fill_fc_hdr(fp, FC_RCTL_DD_SOL_DATA, ep->did, ep->sid,
 719                               FC_TYPE_FCP, f_ctl, fh_parm_offset);
 720
 721                /*
 722                 * send fragment using for a sequence.
 723                 */
 724                error = fc_seq_send(lport, seq, fp);
 725                if (error) {
 726                        WARN_ON(1);             /* send error should be rare */
 727                        return error;
 728                }
 729                fp = NULL;
 730        }
 731        fsp->xfer_len += seq_blen;      /* premature count? */
 732        return 0;
 733}
 734
 735/**
 736 * fc_fcp_abts_resp() - Receive an ABTS response
 737 * @fsp: The FCP packet that is being aborted
 738 * @fp:  The response frame
 739 */
 740static void fc_fcp_abts_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
 741{
 742        int ba_done = 1;
 743        struct fc_ba_rjt *brp;
 744        struct fc_frame_header *fh;
 745
 746        fh = fc_frame_header_get(fp);
 747        switch (fh->fh_r_ctl) {
 748        case FC_RCTL_BA_ACC:
 749                break;
 750        case FC_RCTL_BA_RJT:
 751                brp = fc_frame_payload_get(fp, sizeof(*brp));
 752                if (brp && brp->br_reason == FC_BA_RJT_LOG_ERR)
 753                        break;
 754                /* fall thru */
 755        default:
 756                /*
 757                 * we will let the command timeout
 758                 * and scsi-ml recover in this case,
 759                 * therefore cleared the ba_done flag.
 760                 */
 761                ba_done = 0;
 762        }
 763
 764        if (ba_done)
 765                fc_fcp_abort_done(fsp);
 766}
 767
 768/**
 769 * fc_fcp_recv() - Receive an FCP frame
 770 * @seq: The sequence the frame is on
 771 * @fp:  The received frame
 772 * @arg: The related FCP packet
 773 *
 774 * Context: Called from Soft IRQ context. Can not be called
 775 *          holding the FCP packet list lock.
 776 */
 777static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg)
 778{
 779        struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
 780        struct fc_lport *lport = fsp->lp;
 781        struct fc_frame_header *fh;
 782        struct fcp_txrdy *dd;
 783        u8 r_ctl;
 784        int rc = 0;
 785
 786        if (IS_ERR(fp)) {
 787                fc_fcp_error(fsp, fp);
 788                return;
 789        }
 790
 791        fh = fc_frame_header_get(fp);
 792        r_ctl = fh->fh_r_ctl;
 793
 794        if (lport->state != LPORT_ST_READY) {
 795                FC_FCP_DBG(fsp, "lport state %d, ignoring r_ctl %x\n",
 796                           lport->state, r_ctl);
 797                goto out;
 798        }
 799        if (fc_fcp_lock_pkt(fsp))
 800                goto out;
 801
 802        if (fh->fh_type == FC_TYPE_BLS) {
 803                fc_fcp_abts_resp(fsp, fp);
 804                goto unlock;
 805        }
 806
 807        if (fsp->state & (FC_SRB_ABORTED | FC_SRB_ABORT_PENDING)) {
 808                FC_FCP_DBG(fsp, "command aborted, ignoring r_ctl %x\n", r_ctl);
 809                goto unlock;
 810        }
 811
 812        if (r_ctl == FC_RCTL_DD_DATA_DESC) {
 813                /*
 814                 * received XFER RDY from the target
 815                 * need to send data to the target
 816                 */
 817                WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
 818                dd = fc_frame_payload_get(fp, sizeof(*dd));
 819                WARN_ON(!dd);
 820
 821                rc = fc_fcp_send_data(fsp, seq,
 822                                      (size_t) ntohl(dd->ft_data_ro),
 823                                      (size_t) ntohl(dd->ft_burst_len));
 824                if (!rc)
 825                        seq->rec_data = fsp->xfer_len;
 826        } else if (r_ctl == FC_RCTL_DD_SOL_DATA) {
 827                /*
 828                 * received a DATA frame
 829                 * next we will copy the data to the system buffer
 830                 */
 831                WARN_ON(fr_len(fp) < sizeof(*fh));      /* len may be 0 */
 832                fc_fcp_recv_data(fsp, fp);
 833                seq->rec_data = fsp->xfer_contig_end;
 834        } else if (r_ctl == FC_RCTL_DD_CMD_STATUS) {
 835                WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
 836
 837                fc_fcp_resp(fsp, fp);
 838        } else {
 839                FC_FCP_DBG(fsp, "unexpected frame.  r_ctl %x\n", r_ctl);
 840        }
 841unlock:
 842        fc_fcp_unlock_pkt(fsp);
 843out:
 844        fc_frame_free(fp);
 845}
 846
 847/**
 848 * fc_fcp_resp() - Handler for FCP responses
 849 * @fsp: The FCP packet the response is for
 850 * @fp:  The response frame
 851 */
 852static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
 853{
 854        struct fc_frame_header *fh;
 855        struct fcp_resp *fc_rp;
 856        struct fcp_resp_ext *rp_ex;
 857        struct fcp_resp_rsp_info *fc_rp_info;
 858        u32 plen;
 859        u32 expected_len;
 860        u32 respl = 0;
 861        u32 snsl = 0;
 862        u8 flags = 0;
 863
 864        plen = fr_len(fp);
 865        fh = (struct fc_frame_header *)fr_hdr(fp);
 866        if (unlikely(plen < sizeof(*fh) + sizeof(*fc_rp)))
 867                goto len_err;
 868        plen -= sizeof(*fh);
 869        fc_rp = (struct fcp_resp *)(fh + 1);
 870        fsp->cdb_status = fc_rp->fr_status;
 871        flags = fc_rp->fr_flags;
 872        fsp->scsi_comp_flags = flags;
 873        expected_len = fsp->data_len;
 874
 875        /* if ddp, update xfer len */
 876        fc_fcp_ddp_done(fsp);
 877
 878        if (unlikely((flags & ~FCP_CONF_REQ) || fc_rp->fr_status)) {
 879                rp_ex = (void *)(fc_rp + 1);
 880                if (flags & (FCP_RSP_LEN_VAL | FCP_SNS_LEN_VAL)) {
 881                        if (plen < sizeof(*fc_rp) + sizeof(*rp_ex))
 882                                goto len_err;
 883                        fc_rp_info = (struct fcp_resp_rsp_info *)(rp_ex + 1);
 884                        if (flags & FCP_RSP_LEN_VAL) {
 885                                respl = ntohl(rp_ex->fr_rsp_len);
 886                                if ((respl != FCP_RESP_RSP_INFO_LEN4) &&
 887                                    (respl != FCP_RESP_RSP_INFO_LEN8))
 888                                        goto len_err;
 889                                if (fsp->wait_for_comp) {
 890                                        /* Abuse cdb_status for rsp code */
 891                                        fsp->cdb_status = fc_rp_info->rsp_code;
 892                                        complete(&fsp->tm_done);
 893                                        /*
 894                                         * tmfs will not have any scsi cmd so
 895                                         * exit here
 896                                         */
 897                                        return;
 898                                }
 899                        }
 900                        if (flags & FCP_SNS_LEN_VAL) {
 901                                snsl = ntohl(rp_ex->fr_sns_len);
 902                                if (snsl > SCSI_SENSE_BUFFERSIZE)
 903                                        snsl = SCSI_SENSE_BUFFERSIZE;
 904                                memcpy(fsp->cmd->sense_buffer,
 905                                       (char *)fc_rp_info + respl, snsl);
 906                        }
 907                }
 908                if (flags & (FCP_RESID_UNDER | FCP_RESID_OVER)) {
 909                        if (plen < sizeof(*fc_rp) + sizeof(rp_ex->fr_resid))
 910                                goto len_err;
 911                        if (flags & FCP_RESID_UNDER) {
 912                                fsp->scsi_resid = ntohl(rp_ex->fr_resid);
 913                                /*
 914                                 * The cmnd->underflow is the minimum number of
 915                                 * bytes that must be transferred for this
 916                                 * command.  Provided a sense condition is not
 917                                 * present, make sure the actual amount
 918                                 * transferred is at least the underflow value
 919                                 * or fail.
 920                                 */
 921                                if (!(flags & FCP_SNS_LEN_VAL) &&
 922                                    (fc_rp->fr_status == 0) &&
 923                                    (scsi_bufflen(fsp->cmd) -
 924                                     fsp->scsi_resid) < fsp->cmd->underflow)
 925                                        goto err;
 926                                expected_len -= fsp->scsi_resid;
 927                        } else {
 928                                fsp->status_code = FC_ERROR;
 929                        }
 930                }
 931        }
 932        fsp->state |= FC_SRB_RCV_STATUS;
 933
 934        /*
 935         * Check for missing or extra data frames.
 936         */
 937        if (unlikely(fsp->cdb_status == SAM_STAT_GOOD &&
 938                     fsp->xfer_len != expected_len)) {
 939                if (fsp->xfer_len < expected_len) {
 940                        /*
 941                         * Some data may be queued locally,
 942                         * Wait a at least one jiffy to see if it is delivered.
 943                         * If this expires without data, we may do SRR.
 944                         */
 945                        if (fsp->lp->qfull) {
 946                                FC_FCP_DBG(fsp, "tgt %6.6x queue busy retry\n",
 947                                           fsp->rport->port_id);
 948                                return;
 949                        }
 950                        FC_FCP_DBG(fsp, "tgt %6.6x xfer len %zx data underrun "
 951                                   "len %x, data len %x\n",
 952                                   fsp->rport->port_id,
 953                                   fsp->xfer_len, expected_len, fsp->data_len);
 954                        fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
 955                        return;
 956                }
 957                fsp->status_code = FC_DATA_OVRRUN;
 958                FC_FCP_DBG(fsp, "tgt %6.6x xfer len %zx greater than expected, "
 959                           "len %x, data len %x\n",
 960                           fsp->rport->port_id,
 961                           fsp->xfer_len, expected_len, fsp->data_len);
 962        }
 963        fc_fcp_complete_locked(fsp);
 964        return;
 965
 966len_err:
 967        FC_FCP_DBG(fsp, "short FCP response. flags 0x%x len %u respl %u "
 968                   "snsl %u\n", flags, fr_len(fp), respl, snsl);
 969err:
 970        fsp->status_code = FC_ERROR;
 971        fc_fcp_complete_locked(fsp);
 972}
 973
 974/**
 975 * fc_fcp_complete_locked() - Complete processing of a fcp_pkt with the
 976 *                            fcp_pkt lock held
 977 * @fsp: The FCP packet to be completed
 978 *
 979 * This function may sleep if a timer is pending. The packet lock must be
 980 * held, and the host lock must not be held.
 981 */
 982static void fc_fcp_complete_locked(struct fc_fcp_pkt *fsp)
 983{
 984        struct fc_lport *lport = fsp->lp;
 985        struct fc_seq *seq;
 986        struct fc_exch *ep;
 987        u32 f_ctl;
 988
 989        if (fsp->state & FC_SRB_ABORT_PENDING)
 990                return;
 991
 992        if (fsp->state & FC_SRB_ABORTED) {
 993                if (!fsp->status_code)
 994                        fsp->status_code = FC_CMD_ABORTED;
 995        } else {
 996                /*
 997                 * Test for transport underrun, independent of response
 998                 * underrun status.
 999                 */
1000                if (fsp->cdb_status == SAM_STAT_GOOD &&
1001                    fsp->xfer_len < fsp->data_len && !fsp->io_status &&
1002                    (!(fsp->scsi_comp_flags & FCP_RESID_UNDER) ||
1003                     fsp->xfer_len < fsp->data_len - fsp->scsi_resid)) {
1004                        FC_FCP_DBG(fsp, "data underrun, xfer %zx data %x\n",
1005                                    fsp->xfer_len, fsp->data_len);
1006                        fsp->status_code = FC_DATA_UNDRUN;
1007                }
1008        }
1009
1010        seq = fsp->seq_ptr;
1011        if (seq) {
1012                fsp->seq_ptr = NULL;
1013                if (unlikely(fsp->scsi_comp_flags & FCP_CONF_REQ)) {
1014                        struct fc_frame *conf_frame;
1015                        struct fc_seq *csp;
1016
1017                        csp = fc_seq_start_next(seq);
1018                        conf_frame = fc_fcp_frame_alloc(fsp->lp, 0);
1019                        if (conf_frame) {
1020                                f_ctl = FC_FC_SEQ_INIT;
1021                                f_ctl |= FC_FC_LAST_SEQ | FC_FC_END_SEQ;
1022                                ep = fc_seq_exch(seq);
1023                                fc_fill_fc_hdr(conf_frame, FC_RCTL_DD_SOL_CTL,
1024                                               ep->did, ep->sid,
1025                                               FC_TYPE_FCP, f_ctl, 0);
1026                                fc_seq_send(lport, csp, conf_frame);
1027                        }
1028                }
1029                fc_exch_done(seq);
1030        }
1031        /*
1032         * Some resets driven by SCSI are not I/Os and do not have
1033         * SCSI commands associated with the requests. We should not
1034         * call I/O completion if we do not have a SCSI command.
1035         */
1036        if (fsp->cmd)
1037                fc_io_compl(fsp);
1038}
1039
1040/**
1041 * fc_fcp_cleanup_cmd() - Cancel the active exchange on a fcp_pkt
1042 * @fsp:   The FCP packet whose exchanges should be canceled
1043 * @error: The reason for the cancellation
1044 */
1045static void fc_fcp_cleanup_cmd(struct fc_fcp_pkt *fsp, int error)
1046{
1047        if (fsp->seq_ptr) {
1048                fc_exch_done(fsp->seq_ptr);
1049                fsp->seq_ptr = NULL;
1050        }
1051        fsp->status_code = error;
1052}
1053
1054/**
1055 * fc_fcp_cleanup_each_cmd() - Cancel all exchanges on a local port
1056 * @lport: The local port whose exchanges should be canceled
1057 * @id:    The target's ID
1058 * @lun:   The LUN
1059 * @error: The reason for cancellation
1060 *
1061 * If lun or id is -1, they are ignored.
1062 */
1063static void fc_fcp_cleanup_each_cmd(struct fc_lport *lport, unsigned int id,
1064                                    unsigned int lun, int error)
1065{
1066        struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1067        struct fc_fcp_pkt *fsp;
1068        struct scsi_cmnd *sc_cmd;
1069        unsigned long flags;
1070
1071        spin_lock_irqsave(&si->scsi_queue_lock, flags);
1072restart:
1073        list_for_each_entry(fsp, &si->scsi_pkt_queue, list) {
1074                sc_cmd = fsp->cmd;
1075                if (id != -1 && scmd_id(sc_cmd) != id)
1076                        continue;
1077
1078                if (lun != -1 && sc_cmd->device->lun != lun)
1079                        continue;
1080
1081                fc_fcp_pkt_hold(fsp);
1082                spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1083
1084                spin_lock_bh(&fsp->scsi_pkt_lock);
1085                if (!(fsp->state & FC_SRB_COMPL)) {
1086                        fsp->state |= FC_SRB_COMPL;
1087                        /*
1088                         * TODO: dropping scsi_pkt_lock and then reacquiring
1089                         * again around fc_fcp_cleanup_cmd() is required,
1090                         * since fc_fcp_cleanup_cmd() calls into
1091                         * fc_seq_set_resp() and that func preempts cpu using
1092                         * schedule. May be schedule and related code should be
1093                         * removed instead of unlocking here to avoid scheduling
1094                         * while atomic bug.
1095                         */
1096                        spin_unlock_bh(&fsp->scsi_pkt_lock);
1097
1098                        fc_fcp_cleanup_cmd(fsp, error);
1099
1100                        spin_lock_bh(&fsp->scsi_pkt_lock);
1101                        fc_io_compl(fsp);
1102                }
1103                spin_unlock_bh(&fsp->scsi_pkt_lock);
1104
1105                fc_fcp_pkt_release(fsp);
1106                spin_lock_irqsave(&si->scsi_queue_lock, flags);
1107                /*
1108                 * while we dropped the lock multiple pkts could
1109                 * have been released, so we have to start over.
1110                 */
1111                goto restart;
1112        }
1113        spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1114}
1115
1116/**
1117 * fc_fcp_abort_io() - Abort all FCP-SCSI exchanges on a local port
1118 * @lport: The local port whose exchanges are to be aborted
1119 */
1120static void fc_fcp_abort_io(struct fc_lport *lport)
1121{
1122        fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_HRD_ERROR);
1123}
1124
1125/**
1126 * fc_fcp_pkt_send() - Send a fcp_pkt
1127 * @lport: The local port to send the FCP packet on
1128 * @fsp:   The FCP packet to send
1129 *
1130 * Return:  Zero for success and -1 for failure
1131 * Locks:   Called without locks held
1132 */
1133static int fc_fcp_pkt_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp)
1134{
1135        struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1136        unsigned long flags;
1137        int rc;
1138
1139        fsp->cmd->SCp.ptr = (char *)fsp;
1140        fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1141        fsp->cdb_cmd.fc_flags = fsp->req_flags & ~FCP_CFL_LEN_MASK;
1142
1143        int_to_scsilun(fsp->cmd->device->lun, &fsp->cdb_cmd.fc_lun);
1144        memcpy(fsp->cdb_cmd.fc_cdb, fsp->cmd->cmnd, fsp->cmd->cmd_len);
1145
1146        spin_lock_irqsave(&si->scsi_queue_lock, flags);
1147        list_add_tail(&fsp->list, &si->scsi_pkt_queue);
1148        spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1149        rc = lport->tt.fcp_cmd_send(lport, fsp, fc_fcp_recv);
1150        if (unlikely(rc)) {
1151                spin_lock_irqsave(&si->scsi_queue_lock, flags);
1152                fsp->cmd->SCp.ptr = NULL;
1153                list_del(&fsp->list);
1154                spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1155        }
1156
1157        return rc;
1158}
1159
1160/**
1161 * fc_fcp_cmd_send() - Send a FCP command
1162 * @lport: The local port to send the command on
1163 * @fsp:   The FCP packet the command is on
1164 * @resp:  The handler for the response
1165 */
1166static int fc_fcp_cmd_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1167                           void (*resp)(struct fc_seq *,
1168                                        struct fc_frame *fp,
1169                                        void *arg))
1170{
1171        struct fc_frame *fp;
1172        struct fc_seq *seq;
1173        struct fc_rport *rport;
1174        struct fc_rport_libfc_priv *rpriv;
1175        const size_t len = sizeof(fsp->cdb_cmd);
1176        int rc = 0;
1177
1178        if (fc_fcp_lock_pkt(fsp))
1179                return 0;
1180
1181        fp = fc_fcp_frame_alloc(lport, sizeof(fsp->cdb_cmd));
1182        if (!fp) {
1183                rc = -1;
1184                goto unlock;
1185        }
1186
1187        memcpy(fc_frame_payload_get(fp, len), &fsp->cdb_cmd, len);
1188        fr_fsp(fp) = fsp;
1189        rport = fsp->rport;
1190        fsp->max_payload = rport->maxframe_size;
1191        rpriv = rport->dd_data;
1192
1193        fc_fill_fc_hdr(fp, FC_RCTL_DD_UNSOL_CMD, rport->port_id,
1194                       rpriv->local_port->port_id, FC_TYPE_FCP,
1195                       FC_FCTL_REQ, 0);
1196
1197        seq = fc_exch_seq_send(lport, fp, resp, fc_fcp_pkt_destroy, fsp, 0);
1198        if (!seq) {
1199                rc = -1;
1200                goto unlock;
1201        }
1202        fsp->seq_ptr = seq;
1203        fc_fcp_pkt_hold(fsp);   /* hold for fc_fcp_pkt_destroy */
1204
1205        fsp->timer.function = fc_fcp_timeout;
1206        if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
1207                fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1208
1209unlock:
1210        fc_fcp_unlock_pkt(fsp);
1211        return rc;
1212}
1213
1214/**
1215 * fc_fcp_error() - Handler for FCP layer errors
1216 * @fsp: The FCP packet the error is on
1217 * @fp:  The frame that has errored
1218 */
1219static void fc_fcp_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1220{
1221        int error = PTR_ERR(fp);
1222
1223        if (fc_fcp_lock_pkt(fsp))
1224                return;
1225
1226        if (error == -FC_EX_CLOSED) {
1227                fc_fcp_retry_cmd(fsp, FC_ERROR);
1228                goto unlock;
1229        }
1230
1231        /*
1232         * clear abort pending, because the lower layer
1233         * decided to force completion.
1234         */
1235        fsp->state &= ~FC_SRB_ABORT_PENDING;
1236        fsp->status_code = FC_CMD_PLOGO;
1237        fc_fcp_complete_locked(fsp);
1238unlock:
1239        fc_fcp_unlock_pkt(fsp);
1240}
1241
1242/**
1243 * fc_fcp_pkt_abort() - Abort a fcp_pkt
1244 * @fsp:   The FCP packet to abort on
1245 *
1246 * Called to send an abort and then wait for abort completion
1247 */
1248static int fc_fcp_pkt_abort(struct fc_fcp_pkt *fsp)
1249{
1250        int rc = FAILED;
1251        unsigned long ticks_left;
1252
1253        FC_FCP_DBG(fsp, "pkt abort state %x\n", fsp->state);
1254        if (fc_fcp_send_abort(fsp)) {
1255                FC_FCP_DBG(fsp, "failed to send abort\n");
1256                return FAILED;
1257        }
1258
1259        if (fsp->state & FC_SRB_ABORTED) {
1260                FC_FCP_DBG(fsp, "target abort cmd  completed\n");
1261                return SUCCESS;
1262        }
1263
1264        init_completion(&fsp->tm_done);
1265        fsp->wait_for_comp = 1;
1266
1267        spin_unlock_bh(&fsp->scsi_pkt_lock);
1268        ticks_left = wait_for_completion_timeout(&fsp->tm_done,
1269                                                        FC_SCSI_TM_TOV);
1270        spin_lock_bh(&fsp->scsi_pkt_lock);
1271        fsp->wait_for_comp = 0;
1272
1273        if (!ticks_left) {
1274                FC_FCP_DBG(fsp, "target abort cmd  failed\n");
1275        } else if (fsp->state & FC_SRB_ABORTED) {
1276                FC_FCP_DBG(fsp, "target abort cmd  passed\n");
1277                rc = SUCCESS;
1278                fc_fcp_complete_locked(fsp);
1279        }
1280
1281        return rc;
1282}
1283
1284/**
1285 * fc_lun_reset_send() - Send LUN reset command
1286 * @data: The FCP packet that identifies the LUN to be reset
1287 */
1288static void fc_lun_reset_send(struct timer_list *t)
1289{
1290        struct fc_fcp_pkt *fsp = from_timer(fsp, t, timer);
1291        struct fc_lport *lport = fsp->lp;
1292
1293        if (lport->tt.fcp_cmd_send(lport, fsp, fc_tm_done)) {
1294                if (fsp->recov_retry++ >= FC_MAX_RECOV_RETRY)
1295                        return;
1296                if (fc_fcp_lock_pkt(fsp))
1297                        return;
1298                fsp->timer.function = fc_lun_reset_send;
1299                fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1300                fc_fcp_unlock_pkt(fsp);
1301        }
1302}
1303
1304/**
1305 * fc_lun_reset() - Send a LUN RESET command to a device
1306 *                  and wait for the reply
1307 * @lport: The local port to sent the command on
1308 * @fsp:   The FCP packet that identifies the LUN to be reset
1309 * @id:    The SCSI command ID
1310 * @lun:   The LUN ID to be reset
1311 */
1312static int fc_lun_reset(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1313                        unsigned int id, unsigned int lun)
1314{
1315        int rc;
1316
1317        fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1318        fsp->cdb_cmd.fc_tm_flags = FCP_TMF_LUN_RESET;
1319        int_to_scsilun(lun, &fsp->cdb_cmd.fc_lun);
1320
1321        fsp->wait_for_comp = 1;
1322        init_completion(&fsp->tm_done);
1323
1324        fc_lun_reset_send(&fsp->timer);
1325
1326        /*
1327         * wait for completion of reset
1328         * after that make sure all commands are terminated
1329         */
1330        rc = wait_for_completion_timeout(&fsp->tm_done, FC_SCSI_TM_TOV);
1331
1332        spin_lock_bh(&fsp->scsi_pkt_lock);
1333        fsp->state |= FC_SRB_COMPL;
1334        spin_unlock_bh(&fsp->scsi_pkt_lock);
1335
1336        del_timer_sync(&fsp->timer);
1337
1338        spin_lock_bh(&fsp->scsi_pkt_lock);
1339        if (fsp->seq_ptr) {
1340                fc_exch_done(fsp->seq_ptr);
1341                fsp->seq_ptr = NULL;
1342        }
1343        fsp->wait_for_comp = 0;
1344        spin_unlock_bh(&fsp->scsi_pkt_lock);
1345
1346        if (!rc) {
1347                FC_SCSI_DBG(lport, "lun reset failed\n");
1348                return FAILED;
1349        }
1350
1351        /* cdb_status holds the tmf's rsp code */
1352        if (fsp->cdb_status != FCP_TMF_CMPL)
1353                return FAILED;
1354
1355        FC_SCSI_DBG(lport, "lun reset to lun %u completed\n", lun);
1356        fc_fcp_cleanup_each_cmd(lport, id, lun, FC_CMD_ABORTED);
1357        return SUCCESS;
1358}
1359
1360/**
1361 * fc_tm_done() - Task Management response handler
1362 * @seq: The sequence that the response is on
1363 * @fp:  The response frame
1364 * @arg: The FCP packet the response is for
1365 */
1366static void fc_tm_done(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1367{
1368        struct fc_fcp_pkt *fsp = arg;
1369        struct fc_frame_header *fh;
1370
1371        if (IS_ERR(fp)) {
1372                /*
1373                 * If there is an error just let it timeout or wait
1374                 * for TMF to be aborted if it timedout.
1375                 *
1376                 * scsi-eh will escalate for when either happens.
1377                 */
1378                return;
1379        }
1380
1381        if (fc_fcp_lock_pkt(fsp))
1382                goto out;
1383
1384        /*
1385         * raced with eh timeout handler.
1386         */
1387        if (!fsp->seq_ptr || !fsp->wait_for_comp)
1388                goto out_unlock;
1389
1390        fh = fc_frame_header_get(fp);
1391        if (fh->fh_type != FC_TYPE_BLS)
1392                fc_fcp_resp(fsp, fp);
1393        fsp->seq_ptr = NULL;
1394        fc_exch_done(seq);
1395out_unlock:
1396        fc_fcp_unlock_pkt(fsp);
1397out:
1398        fc_frame_free(fp);
1399}
1400
1401/**
1402 * fc_fcp_cleanup() - Cleanup all FCP exchanges on a local port
1403 * @lport: The local port to be cleaned up
1404 */
1405static void fc_fcp_cleanup(struct fc_lport *lport)
1406{
1407        fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_ERROR);
1408}
1409
1410/**
1411 * fc_fcp_timeout() - Handler for fcp_pkt timeouts
1412 * @data: The FCP packet that has timed out
1413 *
1414 * If REC is supported then just issue it and return. The REC exchange will
1415 * complete or time out and recovery can continue at that point. Otherwise,
1416 * if the response has been received without all the data it has been
1417 * ER_TIMEOUT since the response was received. If the response has not been
1418 * received we see if data was received recently. If it has been then we
1419 * continue waiting, otherwise, we abort the command.
1420 */
1421static void fc_fcp_timeout(struct timer_list *t)
1422{
1423        struct fc_fcp_pkt *fsp = from_timer(fsp, t, timer);
1424        struct fc_rport *rport = fsp->rport;
1425        struct fc_rport_libfc_priv *rpriv = rport->dd_data;
1426
1427        if (fc_fcp_lock_pkt(fsp))
1428                return;
1429
1430        if (fsp->cdb_cmd.fc_tm_flags)
1431                goto unlock;
1432
1433        if (fsp->lp->qfull) {
1434                FC_FCP_DBG(fsp, "fcp timeout, resetting timer delay %d\n",
1435                           fsp->timer_delay);
1436                fsp->timer.function = fc_fcp_timeout;
1437                fc_fcp_timer_set(fsp, fsp->timer_delay);
1438                goto unlock;
1439        }
1440        FC_FCP_DBG(fsp, "fcp timeout, delay %d flags %x state %x\n",
1441                   fsp->timer_delay, rpriv->flags, fsp->state);
1442        fsp->state |= FC_SRB_FCP_PROCESSING_TMO;
1443
1444        if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
1445                fc_fcp_rec(fsp);
1446        else if (fsp->state & FC_SRB_RCV_STATUS)
1447                fc_fcp_complete_locked(fsp);
1448        else
1449                fc_fcp_recovery(fsp, FC_TIMED_OUT);
1450        fsp->state &= ~FC_SRB_FCP_PROCESSING_TMO;
1451unlock:
1452        fc_fcp_unlock_pkt(fsp);
1453}
1454
1455/**
1456 * fc_fcp_rec() - Send a REC ELS request
1457 * @fsp: The FCP packet to send the REC request on
1458 */
1459static void fc_fcp_rec(struct fc_fcp_pkt *fsp)
1460{
1461        struct fc_lport *lport;
1462        struct fc_frame *fp;
1463        struct fc_rport *rport;
1464        struct fc_rport_libfc_priv *rpriv;
1465
1466        lport = fsp->lp;
1467        rport = fsp->rport;
1468        rpriv = rport->dd_data;
1469        if (!fsp->seq_ptr || rpriv->rp_state != RPORT_ST_READY) {
1470                fsp->status_code = FC_HRD_ERROR;
1471                fsp->io_status = 0;
1472                fc_fcp_complete_locked(fsp);
1473                return;
1474        }
1475
1476        fp = fc_fcp_frame_alloc(lport, sizeof(struct fc_els_rec));
1477        if (!fp)
1478                goto retry;
1479
1480        fr_seq(fp) = fsp->seq_ptr;
1481        fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, rport->port_id,
1482                       rpriv->local_port->port_id, FC_TYPE_ELS,
1483                       FC_FCTL_REQ, 0);
1484        if (lport->tt.elsct_send(lport, rport->port_id, fp, ELS_REC,
1485                                 fc_fcp_rec_resp, fsp,
1486                                 2 * lport->r_a_tov)) {
1487                fc_fcp_pkt_hold(fsp);           /* hold while REC outstanding */
1488                return;
1489        }
1490retry:
1491        if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1492                fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1493        else
1494                fc_fcp_recovery(fsp, FC_TIMED_OUT);
1495}
1496
1497/**
1498 * fc_fcp_rec_resp() - Handler for REC ELS responses
1499 * @seq: The sequence the response is on
1500 * @fp:  The response frame
1501 * @arg: The FCP packet the response is on
1502 *
1503 * If the response is a reject then the scsi layer will handle
1504 * the timeout. If the response is a LS_ACC then if the I/O was not completed
1505 * set the timeout and return. If the I/O was completed then complete the
1506 * exchange and tell the SCSI layer.
1507 */
1508static void fc_fcp_rec_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1509{
1510        struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
1511        struct fc_els_rec_acc *recp;
1512        struct fc_els_ls_rjt *rjt;
1513        u32 e_stat;
1514        u8 opcode;
1515        u32 offset;
1516        enum dma_data_direction data_dir;
1517        enum fc_rctl r_ctl;
1518        struct fc_rport_libfc_priv *rpriv;
1519
1520        if (IS_ERR(fp)) {
1521                fc_fcp_rec_error(fsp, fp);
1522                return;
1523        }
1524
1525        if (fc_fcp_lock_pkt(fsp))
1526                goto out;
1527
1528        fsp->recov_retry = 0;
1529        opcode = fc_frame_payload_op(fp);
1530        if (opcode == ELS_LS_RJT) {
1531                rjt = fc_frame_payload_get(fp, sizeof(*rjt));
1532                switch (rjt->er_reason) {
1533                default:
1534                        FC_FCP_DBG(fsp,
1535                                   "device %x invalid REC reject %d/%d\n",
1536                                   fsp->rport->port_id, rjt->er_reason,
1537                                   rjt->er_explan);
1538                        /* fall through */
1539                case ELS_RJT_UNSUP:
1540                        FC_FCP_DBG(fsp, "device does not support REC\n");
1541                        rpriv = fsp->rport->dd_data;
1542                        /*
1543                         * if we do not spport RECs or got some bogus
1544                         * reason then resetup timer so we check for
1545                         * making progress.
1546                         */
1547                        rpriv->flags &= ~FC_RP_FLAGS_REC_SUPPORTED;
1548                        break;
1549                case ELS_RJT_LOGIC:
1550                case ELS_RJT_UNAB:
1551                        FC_FCP_DBG(fsp, "device %x REC reject %d/%d\n",
1552                                   fsp->rport->port_id, rjt->er_reason,
1553                                   rjt->er_explan);
1554                        /*
1555                         * If response got lost or is stuck in the
1556                         * queue somewhere we have no idea if and when
1557                         * the response will be received. So quarantine
1558                         * the xid and retry the command.
1559                         */
1560                        if (rjt->er_explan == ELS_EXPL_OXID_RXID) {
1561                                struct fc_exch *ep = fc_seq_exch(fsp->seq_ptr);
1562                                ep->state |= FC_EX_QUARANTINE;
1563                                fsp->state |= FC_SRB_ABORTED;
1564                                fc_fcp_retry_cmd(fsp, FC_TRANS_RESET);
1565                                break;
1566                        }
1567                        fc_fcp_recovery(fsp, FC_TRANS_RESET);
1568                        break;
1569                }
1570        } else if (opcode == ELS_LS_ACC) {
1571                if (fsp->state & FC_SRB_ABORTED)
1572                        goto unlock_out;
1573
1574                data_dir = fsp->cmd->sc_data_direction;
1575                recp = fc_frame_payload_get(fp, sizeof(*recp));
1576                offset = ntohl(recp->reca_fc4value);
1577                e_stat = ntohl(recp->reca_e_stat);
1578
1579                if (e_stat & ESB_ST_COMPLETE) {
1580
1581                        /*
1582                         * The exchange is complete.
1583                         *
1584                         * For output, we must've lost the response.
1585                         * For input, all data must've been sent.
1586                         * We lost may have lost the response
1587                         * (and a confirmation was requested) and maybe
1588                         * some data.
1589                         *
1590                         * If all data received, send SRR
1591                         * asking for response.  If partial data received,
1592                         * or gaps, SRR requests data at start of gap.
1593                         * Recovery via SRR relies on in-order-delivery.
1594                         */
1595                        if (data_dir == DMA_TO_DEVICE) {
1596                                r_ctl = FC_RCTL_DD_CMD_STATUS;
1597                        } else if (fsp->xfer_contig_end == offset) {
1598                                r_ctl = FC_RCTL_DD_CMD_STATUS;
1599                        } else {
1600                                offset = fsp->xfer_contig_end;
1601                                r_ctl = FC_RCTL_DD_SOL_DATA;
1602                        }
1603                        fc_fcp_srr(fsp, r_ctl, offset);
1604                } else if (e_stat & ESB_ST_SEQ_INIT) {
1605                        /*
1606                         * The remote port has the initiative, so just
1607                         * keep waiting for it to complete.
1608                         */
1609                        fc_fcp_timer_set(fsp,  get_fsp_rec_tov(fsp));
1610                } else {
1611
1612                        /*
1613                         * The exchange is incomplete, we have seq. initiative.
1614                         * Lost response with requested confirmation,
1615                         * lost confirmation, lost transfer ready or
1616                         * lost write data.
1617                         *
1618                         * For output, if not all data was received, ask
1619                         * for transfer ready to be repeated.
1620                         *
1621                         * If we received or sent all the data, send SRR to
1622                         * request response.
1623                         *
1624                         * If we lost a response, we may have lost some read
1625                         * data as well.
1626                         */
1627                        r_ctl = FC_RCTL_DD_SOL_DATA;
1628                        if (data_dir == DMA_TO_DEVICE) {
1629                                r_ctl = FC_RCTL_DD_CMD_STATUS;
1630                                if (offset < fsp->data_len)
1631                                        r_ctl = FC_RCTL_DD_DATA_DESC;
1632                        } else if (offset == fsp->xfer_contig_end) {
1633                                r_ctl = FC_RCTL_DD_CMD_STATUS;
1634                        } else if (fsp->xfer_contig_end < offset) {
1635                                offset = fsp->xfer_contig_end;
1636                        }
1637                        fc_fcp_srr(fsp, r_ctl, offset);
1638                }
1639        }
1640unlock_out:
1641        fc_fcp_unlock_pkt(fsp);
1642out:
1643        fc_fcp_pkt_release(fsp);        /* drop hold for outstanding REC */
1644        fc_frame_free(fp);
1645}
1646
1647/**
1648 * fc_fcp_rec_error() - Handler for REC errors
1649 * @fsp: The FCP packet the error is on
1650 * @fp:  The REC frame
1651 */
1652static void fc_fcp_rec_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1653{
1654        int error = PTR_ERR(fp);
1655
1656        if (fc_fcp_lock_pkt(fsp))
1657                goto out;
1658
1659        switch (error) {
1660        case -FC_EX_CLOSED:
1661                FC_FCP_DBG(fsp, "REC %p fid %6.6x exchange closed\n",
1662                           fsp, fsp->rport->port_id);
1663                fc_fcp_retry_cmd(fsp, FC_ERROR);
1664                break;
1665
1666        default:
1667                FC_FCP_DBG(fsp, "REC %p fid %6.6x error unexpected error %d\n",
1668                           fsp, fsp->rport->port_id, error);
1669                fsp->status_code = FC_CMD_PLOGO;
1670                /* fall through */
1671
1672        case -FC_EX_TIMEOUT:
1673                /*
1674                 * Assume REC or LS_ACC was lost.
1675                 * The exchange manager will have aborted REC, so retry.
1676                 */
1677                FC_FCP_DBG(fsp, "REC %p fid %6.6x exchange timeout retry %d/%d\n",
1678                           fsp, fsp->rport->port_id, fsp->recov_retry,
1679                           FC_MAX_RECOV_RETRY);
1680                if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1681                        fc_fcp_rec(fsp);
1682                else
1683                        fc_fcp_recovery(fsp, FC_ERROR);
1684                break;
1685        }
1686        fc_fcp_unlock_pkt(fsp);
1687out:
1688        fc_fcp_pkt_release(fsp);        /* drop hold for outstanding REC */
1689}
1690
1691/**
1692 * fc_fcp_recovery() - Handler for fcp_pkt recovery
1693 * @fsp: The FCP pkt that needs to be aborted
1694 */
1695static void fc_fcp_recovery(struct fc_fcp_pkt *fsp, u8 code)
1696{
1697        FC_FCP_DBG(fsp, "start recovery code %x\n", code);
1698        fsp->status_code = code;
1699        fsp->cdb_status = 0;
1700        fsp->io_status = 0;
1701        /*
1702         * if this fails then we let the scsi command timer fire and
1703         * scsi-ml escalate.
1704         */
1705        fc_fcp_send_abort(fsp);
1706}
1707
1708/**
1709 * fc_fcp_srr() - Send a SRR request (Sequence Retransmission Request)
1710 * @fsp:   The FCP packet the SRR is to be sent on
1711 * @r_ctl: The R_CTL field for the SRR request
1712 * This is called after receiving status but insufficient data, or
1713 * when expecting status but the request has timed out.
1714 */
1715static void fc_fcp_srr(struct fc_fcp_pkt *fsp, enum fc_rctl r_ctl, u32 offset)
1716{
1717        struct fc_lport *lport = fsp->lp;
1718        struct fc_rport *rport;
1719        struct fc_rport_libfc_priv *rpriv;
1720        struct fc_exch *ep = fc_seq_exch(fsp->seq_ptr);
1721        struct fc_seq *seq;
1722        struct fcp_srr *srr;
1723        struct fc_frame *fp;
1724
1725        rport = fsp->rport;
1726        rpriv = rport->dd_data;
1727
1728        if (!(rpriv->flags & FC_RP_FLAGS_RETRY) ||
1729            rpriv->rp_state != RPORT_ST_READY)
1730                goto retry;                     /* shouldn't happen */
1731        fp = fc_fcp_frame_alloc(lport, sizeof(*srr));
1732        if (!fp)
1733                goto retry;
1734
1735        srr = fc_frame_payload_get(fp, sizeof(*srr));
1736        memset(srr, 0, sizeof(*srr));
1737        srr->srr_op = ELS_SRR;
1738        srr->srr_ox_id = htons(ep->oxid);
1739        srr->srr_rx_id = htons(ep->rxid);
1740        srr->srr_r_ctl = r_ctl;
1741        srr->srr_rel_off = htonl(offset);
1742
1743        fc_fill_fc_hdr(fp, FC_RCTL_ELS4_REQ, rport->port_id,
1744                       rpriv->local_port->port_id, FC_TYPE_FCP,
1745                       FC_FCTL_REQ, 0);
1746
1747        seq = fc_exch_seq_send(lport, fp, fc_fcp_srr_resp,
1748                               fc_fcp_pkt_destroy,
1749                               fsp, get_fsp_rec_tov(fsp));
1750        if (!seq)
1751                goto retry;
1752
1753        fsp->recov_seq = seq;
1754        fsp->xfer_len = offset;
1755        fsp->xfer_contig_end = offset;
1756        fsp->state &= ~FC_SRB_RCV_STATUS;
1757        fc_fcp_pkt_hold(fsp);           /* hold for outstanding SRR */
1758        return;
1759retry:
1760        fc_fcp_retry_cmd(fsp, FC_TRANS_RESET);
1761}
1762
1763/**
1764 * fc_fcp_srr_resp() - Handler for SRR response
1765 * @seq: The sequence the SRR is on
1766 * @fp:  The SRR frame
1767 * @arg: The FCP packet the SRR is on
1768 */
1769static void fc_fcp_srr_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1770{
1771        struct fc_fcp_pkt *fsp = arg;
1772        struct fc_frame_header *fh;
1773
1774        if (IS_ERR(fp)) {
1775                fc_fcp_srr_error(fsp, fp);
1776                return;
1777        }
1778
1779        if (fc_fcp_lock_pkt(fsp))
1780                goto out;
1781
1782        fh = fc_frame_header_get(fp);
1783        /*
1784         * BUG? fc_fcp_srr_error calls fc_exch_done which would release
1785         * the ep. But if fc_fcp_srr_error had got -FC_EX_TIMEOUT,
1786         * then fc_exch_timeout would be sending an abort. The fc_exch_done
1787         * call by fc_fcp_srr_error would prevent fc_exch.c from seeing
1788         * an abort response though.
1789         */
1790        if (fh->fh_type == FC_TYPE_BLS) {
1791                fc_fcp_unlock_pkt(fsp);
1792                return;
1793        }
1794
1795        switch (fc_frame_payload_op(fp)) {
1796        case ELS_LS_ACC:
1797                fsp->recov_retry = 0;
1798                fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1799                break;
1800        case ELS_LS_RJT:
1801        default:
1802                fc_fcp_recovery(fsp, FC_ERROR);
1803                break;
1804        }
1805        fc_fcp_unlock_pkt(fsp);
1806out:
1807        fc_exch_done(seq);
1808        fc_frame_free(fp);
1809}
1810
1811/**
1812 * fc_fcp_srr_error() - Handler for SRR errors
1813 * @fsp: The FCP packet that the SRR error is on
1814 * @fp:  The SRR frame
1815 */
1816static void fc_fcp_srr_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1817{
1818        if (fc_fcp_lock_pkt(fsp))
1819                goto out;
1820        switch (PTR_ERR(fp)) {
1821        case -FC_EX_TIMEOUT:
1822                FC_FCP_DBG(fsp, "SRR timeout, retries %d\n", fsp->recov_retry);
1823                if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1824                        fc_fcp_rec(fsp);
1825                else
1826                        fc_fcp_recovery(fsp, FC_TIMED_OUT);
1827                break;
1828        case -FC_EX_CLOSED:                     /* e.g., link failure */
1829                FC_FCP_DBG(fsp, "SRR error, exchange closed\n");
1830                /* fall through */
1831        default:
1832                fc_fcp_retry_cmd(fsp, FC_ERROR);
1833                break;
1834        }
1835        fc_fcp_unlock_pkt(fsp);
1836out:
1837        fc_exch_done(fsp->recov_seq);
1838}
1839
1840/**
1841 * fc_fcp_lport_queue_ready() - Determine if the lport and it's queue is ready
1842 * @lport: The local port to be checked
1843 */
1844static inline int fc_fcp_lport_queue_ready(struct fc_lport *lport)
1845{
1846        /* lock ? */
1847        return (lport->state == LPORT_ST_READY) &&
1848                lport->link_up && !lport->qfull;
1849}
1850
1851/**
1852 * fc_queuecommand() - The queuecommand function of the SCSI template
1853 * @shost: The Scsi_Host that the command was issued to
1854 * @cmd:   The scsi_cmnd to be executed
1855 *
1856 * This is the i/o strategy routine, called by the SCSI layer.
1857 */
1858int fc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *sc_cmd)
1859{
1860        struct fc_lport *lport = shost_priv(shost);
1861        struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
1862        struct fc_fcp_pkt *fsp;
1863        int rval;
1864        int rc = 0;
1865        struct fc_stats *stats;
1866
1867        rval = fc_remote_port_chkready(rport);
1868        if (rval) {
1869                sc_cmd->result = rval;
1870                sc_cmd->scsi_done(sc_cmd);
1871                return 0;
1872        }
1873
1874        if (!*(struct fc_remote_port **)rport->dd_data) {
1875                /*
1876                 * rport is transitioning from blocked/deleted to
1877                 * online
1878                 */
1879                sc_cmd->result = DID_IMM_RETRY << 16;
1880                sc_cmd->scsi_done(sc_cmd);
1881                goto out;
1882        }
1883
1884        if (!fc_fcp_lport_queue_ready(lport)) {
1885                if (lport->qfull) {
1886                        if (fc_fcp_can_queue_ramp_down(lport))
1887                                shost_printk(KERN_ERR, lport->host,
1888                                             "libfc: queue full, "
1889                                             "reducing can_queue to %d.\n",
1890                                             lport->host->can_queue);
1891                }
1892                rc = SCSI_MLQUEUE_HOST_BUSY;
1893                goto out;
1894        }
1895
1896        fsp = fc_fcp_pkt_alloc(lport, GFP_ATOMIC);
1897        if (fsp == NULL) {
1898                rc = SCSI_MLQUEUE_HOST_BUSY;
1899                goto out;
1900        }
1901
1902        /*
1903         * build the libfc request pkt
1904         */
1905        fsp->cmd = sc_cmd;      /* save the cmd */
1906        fsp->rport = rport;     /* set the remote port ptr */
1907
1908        /*
1909         * set up the transfer length
1910         */
1911        fsp->data_len = scsi_bufflen(sc_cmd);
1912        fsp->xfer_len = 0;
1913
1914        /*
1915         * setup the data direction
1916         */
1917        stats = per_cpu_ptr(lport->stats, get_cpu());
1918        if (sc_cmd->sc_data_direction == DMA_FROM_DEVICE) {
1919                fsp->req_flags = FC_SRB_READ;
1920                stats->InputRequests++;
1921                stats->InputBytes += fsp->data_len;
1922        } else if (sc_cmd->sc_data_direction == DMA_TO_DEVICE) {
1923                fsp->req_flags = FC_SRB_WRITE;
1924                stats->OutputRequests++;
1925                stats->OutputBytes += fsp->data_len;
1926        } else {
1927                fsp->req_flags = 0;
1928                stats->ControlRequests++;
1929        }
1930        put_cpu();
1931
1932        /*
1933         * send it to the lower layer
1934         * if we get -1 return then put the request in the pending
1935         * queue.
1936         */
1937        rval = fc_fcp_pkt_send(lport, fsp);
1938        if (rval != 0) {
1939                fsp->state = FC_SRB_FREE;
1940                fc_fcp_pkt_release(fsp);
1941                rc = SCSI_MLQUEUE_HOST_BUSY;
1942        }
1943out:
1944        return rc;
1945}
1946EXPORT_SYMBOL(fc_queuecommand);
1947
1948/**
1949 * fc_io_compl() - Handle responses for completed commands
1950 * @fsp: The FCP packet that is complete
1951 *
1952 * Translates fcp_pkt errors to a Linux SCSI errors.
1953 * The fcp packet lock must be held when calling.
1954 */
1955static void fc_io_compl(struct fc_fcp_pkt *fsp)
1956{
1957        struct fc_fcp_internal *si;
1958        struct scsi_cmnd *sc_cmd;
1959        struct fc_lport *lport;
1960        unsigned long flags;
1961
1962        /* release outstanding ddp context */
1963        fc_fcp_ddp_done(fsp);
1964
1965        fsp->state |= FC_SRB_COMPL;
1966        if (!(fsp->state & FC_SRB_FCP_PROCESSING_TMO)) {
1967                spin_unlock_bh(&fsp->scsi_pkt_lock);
1968                del_timer_sync(&fsp->timer);
1969                spin_lock_bh(&fsp->scsi_pkt_lock);
1970        }
1971
1972        lport = fsp->lp;
1973        si = fc_get_scsi_internal(lport);
1974
1975        /*
1976         * if can_queue ramp down is done then try can_queue ramp up
1977         * since commands are completing now.
1978         */
1979        if (si->last_can_queue_ramp_down_time)
1980                fc_fcp_can_queue_ramp_up(lport);
1981
1982        sc_cmd = fsp->cmd;
1983        CMD_SCSI_STATUS(sc_cmd) = fsp->cdb_status;
1984        switch (fsp->status_code) {
1985        case FC_COMPLETE:
1986                if (fsp->cdb_status == 0) {
1987                        /*
1988                         * good I/O status
1989                         */
1990                        sc_cmd->result = DID_OK << 16;
1991                        if (fsp->scsi_resid)
1992                                CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
1993                } else {
1994                        /*
1995                         * transport level I/O was ok but scsi
1996                         * has non zero status
1997                         */
1998                        sc_cmd->result = (DID_OK << 16) | fsp->cdb_status;
1999                }
2000                break;
2001        case FC_ERROR:
2002                FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
2003                           "due to FC_ERROR\n");
2004                sc_cmd->result = DID_ERROR << 16;
2005                break;
2006        case FC_DATA_UNDRUN:
2007                if ((fsp->cdb_status == 0) && !(fsp->req_flags & FC_SRB_READ)) {
2008                        /*
2009                         * scsi status is good but transport level
2010                         * underrun.
2011                         */
2012                        if (fsp->state & FC_SRB_RCV_STATUS) {
2013                                sc_cmd->result = DID_OK << 16;
2014                        } else {
2015                                FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml"
2016                                           " due to FC_DATA_UNDRUN (trans)\n");
2017                                sc_cmd->result = DID_ERROR << 16;
2018                        }
2019                } else {
2020                        /*
2021                         * scsi got underrun, this is an error
2022                         */
2023                        FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
2024                                   "due to FC_DATA_UNDRUN (scsi)\n");
2025                        CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
2026                        sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
2027                }
2028                break;
2029        case FC_DATA_OVRRUN:
2030                /*
2031                 * overrun is an error
2032                 */
2033                FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
2034                           "due to FC_DATA_OVRRUN\n");
2035                sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
2036                break;
2037        case FC_CMD_ABORTED:
2038                if (host_byte(sc_cmd->result) == DID_TIME_OUT)
2039                        FC_FCP_DBG(fsp, "Returning DID_TIME_OUT to scsi-ml "
2040                                   "due to FC_CMD_ABORTED\n");
2041                else {
2042                        FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
2043                                   "due to FC_CMD_ABORTED\n");
2044                        set_host_byte(sc_cmd, DID_ERROR);
2045                }
2046                sc_cmd->result |= fsp->io_status;
2047                break;
2048        case FC_CMD_RESET:
2049                FC_FCP_DBG(fsp, "Returning DID_RESET to scsi-ml "
2050                           "due to FC_CMD_RESET\n");
2051                sc_cmd->result = (DID_RESET << 16);
2052                break;
2053        case FC_TRANS_RESET:
2054                FC_FCP_DBG(fsp, "Returning DID_SOFT_ERROR to scsi-ml "
2055                           "due to FC_TRANS_RESET\n");
2056                sc_cmd->result = (DID_SOFT_ERROR << 16);
2057                break;
2058        case FC_HRD_ERROR:
2059                FC_FCP_DBG(fsp, "Returning DID_NO_CONNECT to scsi-ml "
2060                           "due to FC_HRD_ERROR\n");
2061                sc_cmd->result = (DID_NO_CONNECT << 16);
2062                break;
2063        case FC_CRC_ERROR:
2064                FC_FCP_DBG(fsp, "Returning DID_PARITY to scsi-ml "
2065                           "due to FC_CRC_ERROR\n");
2066                sc_cmd->result = (DID_PARITY << 16);
2067                break;
2068        case FC_TIMED_OUT:
2069                FC_FCP_DBG(fsp, "Returning DID_BUS_BUSY to scsi-ml "
2070                           "due to FC_TIMED_OUT\n");
2071                sc_cmd->result = (DID_BUS_BUSY << 16) | fsp->io_status;
2072                break;
2073        default:
2074                FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
2075                           "due to unknown error\n");
2076                sc_cmd->result = (DID_ERROR << 16);
2077                break;
2078        }
2079
2080        if (lport->state != LPORT_ST_READY && fsp->status_code != FC_COMPLETE)
2081                sc_cmd->result = (DID_TRANSPORT_DISRUPTED << 16);
2082
2083        spin_lock_irqsave(&si->scsi_queue_lock, flags);
2084        list_del(&fsp->list);
2085        sc_cmd->SCp.ptr = NULL;
2086        spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2087        sc_cmd->scsi_done(sc_cmd);
2088
2089        /* release ref from initial allocation in queue command */
2090        fc_fcp_pkt_release(fsp);
2091}
2092
2093/**
2094 * fc_eh_abort() - Abort a command
2095 * @sc_cmd: The SCSI command to abort
2096 *
2097 * From SCSI host template.
2098 * Send an ABTS to the target device and wait for the response.
2099 */
2100int fc_eh_abort(struct scsi_cmnd *sc_cmd)
2101{
2102        struct fc_fcp_pkt *fsp;
2103        struct fc_lport *lport;
2104        struct fc_fcp_internal *si;
2105        int rc = FAILED;
2106        unsigned long flags;
2107        int rval;
2108
2109        rval = fc_block_scsi_eh(sc_cmd);
2110        if (rval)
2111                return rval;
2112
2113        lport = shost_priv(sc_cmd->device->host);
2114        if (lport->state != LPORT_ST_READY)
2115                return rc;
2116        else if (!lport->link_up)
2117                return rc;
2118
2119        si = fc_get_scsi_internal(lport);
2120        spin_lock_irqsave(&si->scsi_queue_lock, flags);
2121        fsp = CMD_SP(sc_cmd);
2122        if (!fsp) {
2123                /* command completed while scsi eh was setting up */
2124                spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2125                return SUCCESS;
2126        }
2127        /* grab a ref so the fsp and sc_cmd cannot be released from under us */
2128        fc_fcp_pkt_hold(fsp);
2129        spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2130
2131        if (fc_fcp_lock_pkt(fsp)) {
2132                /* completed while we were waiting for timer to be deleted */
2133                rc = SUCCESS;
2134                goto release_pkt;
2135        }
2136
2137        rc = fc_fcp_pkt_abort(fsp);
2138        fc_fcp_unlock_pkt(fsp);
2139
2140release_pkt:
2141        fc_fcp_pkt_release(fsp);
2142        return rc;
2143}
2144EXPORT_SYMBOL(fc_eh_abort);
2145
2146/**
2147 * fc_eh_device_reset() - Reset a single LUN
2148 * @sc_cmd: The SCSI command which identifies the device whose
2149 *          LUN is to be reset
2150 *
2151 * Set from SCSI host template.
2152 */
2153int fc_eh_device_reset(struct scsi_cmnd *sc_cmd)
2154{
2155        struct fc_lport *lport;
2156        struct fc_fcp_pkt *fsp;
2157        struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
2158        int rc = FAILED;
2159        int rval;
2160
2161        rval = fc_block_scsi_eh(sc_cmd);
2162        if (rval)
2163                return rval;
2164
2165        lport = shost_priv(sc_cmd->device->host);
2166
2167        if (lport->state != LPORT_ST_READY)
2168                return rc;
2169
2170        FC_SCSI_DBG(lport, "Resetting rport (%6.6x)\n", rport->port_id);
2171
2172        fsp = fc_fcp_pkt_alloc(lport, GFP_NOIO);
2173        if (fsp == NULL) {
2174                printk(KERN_WARNING "libfc: could not allocate scsi_pkt\n");
2175                goto out;
2176        }
2177
2178        /*
2179         * Build the libfc request pkt. Do not set the scsi cmnd, because
2180         * the sc passed in is not setup for execution like when sent
2181         * through the queuecommand callout.
2182         */
2183        fsp->rport = rport;     /* set the remote port ptr */
2184
2185        /*
2186         * flush outstanding commands
2187         */
2188        rc = fc_lun_reset(lport, fsp, scmd_id(sc_cmd), sc_cmd->device->lun);
2189        fsp->state = FC_SRB_FREE;
2190        fc_fcp_pkt_release(fsp);
2191
2192out:
2193        return rc;
2194}
2195EXPORT_SYMBOL(fc_eh_device_reset);
2196
2197/**
2198 * fc_eh_host_reset() - Reset a Scsi_Host.
2199 * @sc_cmd: The SCSI command that identifies the SCSI host to be reset
2200 */
2201int fc_eh_host_reset(struct scsi_cmnd *sc_cmd)
2202{
2203        struct Scsi_Host *shost = sc_cmd->device->host;
2204        struct fc_lport *lport = shost_priv(shost);
2205        unsigned long wait_tmo;
2206
2207        FC_SCSI_DBG(lport, "Resetting host\n");
2208
2209        fc_lport_reset(lport);
2210        wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT;
2211        while (!fc_fcp_lport_queue_ready(lport) && time_before(jiffies,
2212                                                               wait_tmo))
2213                msleep(1000);
2214
2215        if (fc_fcp_lport_queue_ready(lport)) {
2216                shost_printk(KERN_INFO, shost, "libfc: Host reset succeeded "
2217                             "on port (%6.6x)\n", lport->port_id);
2218                return SUCCESS;
2219        } else {
2220                shost_printk(KERN_INFO, shost, "libfc: Host reset failed, "
2221                             "port (%6.6x) is not ready.\n",
2222                             lport->port_id);
2223                return FAILED;
2224        }
2225}
2226EXPORT_SYMBOL(fc_eh_host_reset);
2227
2228/**
2229 * fc_slave_alloc() - Configure the queue depth of a Scsi_Host
2230 * @sdev: The SCSI device that identifies the SCSI host
2231 *
2232 * Configures queue depth based on host's cmd_per_len. If not set
2233 * then we use the libfc default.
2234 */
2235int fc_slave_alloc(struct scsi_device *sdev)
2236{
2237        struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
2238
2239        if (!rport || fc_remote_port_chkready(rport))
2240                return -ENXIO;
2241
2242        scsi_change_queue_depth(sdev, FC_FCP_DFLT_QUEUE_DEPTH);
2243        return 0;
2244}
2245EXPORT_SYMBOL(fc_slave_alloc);
2246
2247/**
2248 * fc_fcp_destory() - Tear down the FCP layer for a given local port
2249 * @lport: The local port that no longer needs the FCP layer
2250 */
2251void fc_fcp_destroy(struct fc_lport *lport)
2252{
2253        struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
2254
2255        if (!list_empty(&si->scsi_pkt_queue))
2256                printk(KERN_ERR "libfc: Leaked SCSI packets when destroying "
2257                       "port (%6.6x)\n", lport->port_id);
2258
2259        mempool_destroy(si->scsi_pkt_pool);
2260        kfree(si);
2261        lport->scsi_priv = NULL;
2262}
2263EXPORT_SYMBOL(fc_fcp_destroy);
2264
2265int fc_setup_fcp(void)
2266{
2267        int rc = 0;
2268
2269        scsi_pkt_cachep = kmem_cache_create("libfc_fcp_pkt",
2270                                            sizeof(struct fc_fcp_pkt),
2271                                            0, SLAB_HWCACHE_ALIGN, NULL);
2272        if (!scsi_pkt_cachep) {
2273                printk(KERN_ERR "libfc: Unable to allocate SRB cache, "
2274                       "module load failed!");
2275                rc = -ENOMEM;
2276        }
2277
2278        return rc;
2279}
2280
2281void fc_destroy_fcp(void)
2282{
2283        kmem_cache_destroy(scsi_pkt_cachep);
2284}
2285
2286/**
2287 * fc_fcp_init() - Initialize the FCP layer for a local port
2288 * @lport: The local port to initialize the exchange layer for
2289 */
2290int fc_fcp_init(struct fc_lport *lport)
2291{
2292        int rc;
2293        struct fc_fcp_internal *si;
2294
2295        if (!lport->tt.fcp_cmd_send)
2296                lport->tt.fcp_cmd_send = fc_fcp_cmd_send;
2297
2298        if (!lport->tt.fcp_cleanup)
2299                lport->tt.fcp_cleanup = fc_fcp_cleanup;
2300
2301        if (!lport->tt.fcp_abort_io)
2302                lport->tt.fcp_abort_io = fc_fcp_abort_io;
2303
2304        si = kzalloc(sizeof(struct fc_fcp_internal), GFP_KERNEL);
2305        if (!si)
2306                return -ENOMEM;
2307        lport->scsi_priv = si;
2308        si->max_can_queue = lport->host->can_queue;
2309        INIT_LIST_HEAD(&si->scsi_pkt_queue);
2310        spin_lock_init(&si->scsi_queue_lock);
2311
2312        si->scsi_pkt_pool = mempool_create_slab_pool(2, scsi_pkt_cachep);
2313        if (!si->scsi_pkt_pool) {
2314                rc = -ENOMEM;
2315                goto free_internal;
2316        }
2317        return 0;
2318
2319free_internal:
2320        kfree(si);
2321        return rc;
2322}
2323EXPORT_SYMBOL(fc_fcp_init);
2324