// SPDX-License-Identifier: GPL-2.0
/******************************************************************************
 *
 *  (c) Copyright 2008, RealTEK Technologies Inc. All Rights Reserved.
 *
 *  Module:     r819xusb_cmdpkt.c
 *              (RTL8190 TX/RX command packet handler Source C File)
 *
 *  Note:       The module is responsible for handling TX and RX command packet.
 *              1. TX : Send set and query configuration command packet.
 *              2. RX : Receive tx feedback, beacon state, query configuration
 *                      command packet.
 *
 *  Function:
 *
 *  Export:
 *
 *  Abbrev:
 *
 *  History:
 *
 *      Date            Who             Remark
 *      05/06/2008      amy             Create initial version porting from
 *                                      windows driver.
 *
 ******************************************************************************/
#include "r8192U.h"
#include "r819xU_cmdpkt.h"

rt_status SendTxCommandPacket(struct net_device *dev, void *pData, u32 DataLen)
{
        struct r8192_priv   *priv = ieee80211_priv(dev);
        struct sk_buff      *skb;
        struct cb_desc      *tcb_desc;

        /* Get TCB and local buffer from common pool.
         * (It is shared by CmdQ, MgntQ, and USB coalesce DataQ)
         */
        skb  = dev_alloc_skb(USB_HWDESC_HEADER_LEN + DataLen + 4);
        if (!skb)
                return RT_STATUS_FAILURE;
        memcpy((unsigned char *)(skb->cb), &dev, sizeof(dev));
        tcb_desc = (struct cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
        tcb_desc->queue_index = TXCMD_QUEUE;
        tcb_desc->bCmdOrInit = DESC_PACKET_TYPE_NORMAL;
        tcb_desc->bLastIniPkt = 0;
        skb_reserve(skb, USB_HWDESC_HEADER_LEN);
        skb_put_data(skb, pData, DataLen);
        tcb_desc->txbuf_size = (u16)DataLen;

        if (!priv->ieee80211->check_nic_enough_desc(dev, tcb_desc->queue_index) ||
            (!skb_queue_empty(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index])) ||
            (priv->ieee80211->queue_stop)) {
                RT_TRACE(COMP_FIRMWARE, "=== NULL packet ======> tx full!\n");
                skb_queue_tail(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index], skb);
        } else {
                priv->ieee80211->softmac_hard_start_xmit(skb, dev);
        }

        return RT_STATUS_SUCCESS;
}

static void cmpk_count_txstatistic(struct net_device *dev, struct cmd_pkt_tx_feedback *pstx_fb)
{
        struct r8192_priv *priv = ieee80211_priv(dev);
#ifdef ENABLE_PS
        RT_RF_POWER_STATE       rtState;

        pAdapter->HalFunc.GetHwRegHandler(pAdapter, HW_VAR_RF_STATE,
                                          (pu1Byte)(&rtState));

        /* When RF is off, we should not count the packet for hw/sw synchronize
         * reason, ie. there may be a duration while sw switch is changed and
         * hw switch is being changed.
         */
        if (rtState == eRfOff)
                return;
#endif

#ifdef TODO
        if (pAdapter->bInHctTest)
                return;
#endif
        /* We can not know the packet length and transmit type:
         * broadcast or uni or multicast. So the relative statistics
         * must be collected in tx feedback info.
         */
        if (pstx_fb->tok) {
                priv->stats.txfeedbackok++;
                priv->stats.txoktotal++;
                priv->stats.txokbytestotal += pstx_fb->pkt_length;
                priv->stats.txokinperiod++;

                /* We can not make sure broadcast/multicast or unicast mode. */
                if (pstx_fb->pkt_type == PACKET_MULTICAST) {
                        priv->stats.txmulticast++;
                        priv->stats.txbytesmulticast += pstx_fb->pkt_length;
                } else if (pstx_fb->pkt_type == PACKET_BROADCAST) {
                        priv->stats.txbroadcast++;
                        priv->stats.txbytesbroadcast += pstx_fb->pkt_length;
                } else {
                        priv->stats.txunicast++;
                        priv->stats.txbytesunicast += pstx_fb->pkt_length;
                }
        } else {
                priv->stats.txfeedbackfail++;
                priv->stats.txerrtotal++;
                priv->stats.txerrbytestotal += pstx_fb->pkt_length;

                /* We can not make sure broadcast/multicast or unicast mode. */
                if (pstx_fb->pkt_type == PACKET_MULTICAST)
                        priv->stats.txerrmulticast++;
                else if (pstx_fb->pkt_type == PACKET_BROADCAST)
                        priv->stats.txerrbroadcast++;
                else
                        priv->stats.txerrunicast++;
        }

        priv->stats.txretrycount += pstx_fb->retry_cnt;
        priv->stats.txfeedbackretry += pstx_fb->retry_cnt;
}

/*-----------------------------------------------------------------------------
 * Function:    cmpk_handle_tx_feedback()
 *
 * Overview:    The function is responsible for extract the message inside TX
 *              feedbck message from firmware. It will contain dedicated info in
 *              ws-06-0063-rtl8190-command-packet-specification.
 *              Please refer to chapter "TX Feedback Element".
 *              We have to read 20 bytes in the command packet.
 *
 * Input:       struct net_device       *dev
 *              u8                      *pmsg   - Msg Ptr of the command packet.
 *
 * Output:      NONE
 *
 * Return:      NONE
 *
 * Revised History:
 *  When                Who     Remark
 *  05/08/2008          amy     Create Version 0 porting from windows code.
 *
 *---------------------------------------------------------------------------
 */
static void cmpk_handle_tx_feedback(struct net_device *dev, u8 *pmsg)
{
        struct r8192_priv *priv = ieee80211_priv(dev);
        struct cmd_pkt_tx_feedback rx_tx_fb;

        priv->stats.txfeedback++;

        /* 1. Extract TX feedback info from RFD to temp structure buffer. */
        /* It seems that FW use big endian(MIPS) and DRV use little endian in
         * windows OS. So we have to read the content byte by byte or transfer
         * endian type before copy the message copy.
         */
        /* Use pointer to transfer structure memory. */
        memcpy((u8 *)&rx_tx_fb, pmsg, sizeof(struct cmd_pkt_tx_feedback));
        /* 2. Use tx feedback info to count TX statistics. */
        cmpk_count_txstatistic(dev, &rx_tx_fb);
        /* Comment previous method for TX statistic function. */
        /* Collect info TX feedback packet to fill TCB. */
        /* We can not know the packet length and transmit type: broadcast or uni
         * or multicast.
         */
}

static void cmdpkt_beacontimerinterrupt_819xusb(struct net_device *dev)
{
        struct r8192_priv *priv = ieee80211_priv(dev);
        u16 tx_rate;
                /* 87B have to S/W beacon for DTM encryption_cmn. */
                if (priv->ieee80211->current_network.mode == IEEE_A ||
                    priv->ieee80211->current_network.mode == IEEE_N_5G ||
                    (priv->ieee80211->current_network.mode == IEEE_N_24G &&
                     (!priv->ieee80211->pHTInfo->bCurSuppCCK))) {
                        tx_rate = 60;
                        DMESG("send beacon frame  tx rate is 6Mbpm\n");
                } else {
                        tx_rate = 10;
                        DMESG("send beacon frame  tx rate is 1Mbpm\n");
                }

                rtl819xusb_beacon_tx(dev, tx_rate); /* HW Beacon */
}

/*-----------------------------------------------------------------------------
 * Function:    cmpk_handle_interrupt_status()
 *
 * Overview:    The function is responsible for extract the message from
 *              firmware. It will contain dedicated info in
 *              ws-07-0063-v06-rtl819x-command-packet-specification-070315.doc.
 *              Please refer to chapter "Interrupt Status Element".
 *
 * Input:       struct net_device *dev
 *              u8 *pmsg                - Message Pointer of the command packet.
 *
 * Output:      NONE
 *
 * Return:      NONE
 *
 * Revised History:
 *  When                Who     Remark
 *  05/12/2008          amy     Add this for rtl8192 porting from windows code.
 *
 *---------------------------------------------------------------------------
 */
static void cmpk_handle_interrupt_status(struct net_device *dev, u8 *pmsg)
{
        struct cmd_pkt_interrupt_status  rx_intr_status;        /* */
        struct r8192_priv *priv = ieee80211_priv(dev);

        DMESG("---> cmpk_Handle_Interrupt_Status()\n");

        /* 1. Extract TX feedback info from RFD to temp structure buffer. */
        /* It seems that FW use big endian(MIPS) and DRV use little endian in
         * windows OS. So we have to read the content byte by byte or transfer
         * endian type before copy the message copy.
         */
        rx_intr_status.length = pmsg[1];
        if (rx_intr_status.length != (sizeof(struct cmd_pkt_interrupt_status) - 2)) {
                DMESG("cmpk_Handle_Interrupt_Status: wrong length!\n");
                return;
        }

        /* Statistics of beacon for ad-hoc mode. */
        if (priv->ieee80211->iw_mode == IW_MODE_ADHOC) {
                /* 2 maybe need endian transform? */
                rx_intr_status.interrupt_status = *((u32 *)(pmsg + 4));

                DMESG("interrupt status = 0x%x\n",
                      rx_intr_status.interrupt_status);

                if (rx_intr_status.interrupt_status & ISR_TX_BCN_OK) {
                        priv->ieee80211->bibsscoordinator = true;
                        priv->stats.txbeaconokint++;
                } else if (rx_intr_status.interrupt_status & ISR_TX_BCN_ERR) {
                        priv->ieee80211->bibsscoordinator = false;
                        priv->stats.txbeaconerr++;
                }

                if (rx_intr_status.interrupt_status & ISR_BCN_TIMER_INTR)
                        cmdpkt_beacontimerinterrupt_819xusb(dev);
        }

        /* Other information in interrupt status we need? */

        DMESG("<---- cmpk_handle_interrupt_status()\n");
}

/*-----------------------------------------------------------------------------
 * Function:    cmpk_handle_query_config_rx()
 *
 * Overview:    The function is responsible for extract the message from
 *              firmware. It will contain dedicated info in
 *              ws-06-0063-rtl8190-command-packet-specification. Please
 *              refer to chapter "Beacon State Element".
 *
 * Input:       u8    *pmsg     -       Message Pointer of the command packet.
 *
 * Output:      NONE
 *
 * Return:      NONE
 *
 * Revised History:
 *  When                Who     Remark
 *  05/12/2008          amy     Create Version 0 porting from windows code.
 *
 *---------------------------------------------------------------------------
 */
static void cmpk_handle_query_config_rx(struct net_device *dev, u8 *pmsg)
{
        struct cmpk_query_cfg   rx_query_cfg;

        /* 1. Extract TX feedback info from RFD to temp structure buffer. */
        /* It seems that FW use big endian(MIPS) and DRV use little endian in
         * windows OS. So we have to read the content byte by byte or transfer
         * endian type before copy the message copy.
         */
        rx_query_cfg.cfg_action         = (pmsg[4] & 0x80) >> 7;
        rx_query_cfg.cfg_type           = (pmsg[4] & 0x60) >> 5;
        rx_query_cfg.cfg_size           = (pmsg[4] & 0x18) >> 3;
        rx_query_cfg.cfg_page           = (pmsg[6] & 0x0F) >> 0;
        rx_query_cfg.cfg_offset         = pmsg[7];
        rx_query_cfg.value              = (pmsg[8]  << 24) | (pmsg[9]  << 16) |
                                          (pmsg[10] <<  8) | (pmsg[11] <<  0);
        rx_query_cfg.mask               = (pmsg[12] << 24) | (pmsg[13] << 16) |
                                          (pmsg[14] <<  8) | (pmsg[15] <<  0);
}

/*-----------------------------------------------------------------------------
 * Function:    cmpk_count_tx_status()
 *
 * Overview:    Count aggregated tx status from firmwar of one type rx command
 *              packet element id = RX_TX_STATUS.
 *
 * Input:       NONE
 *
 * Output:      NONE
 *
 * Return:      NONE
 *
 * Revised History:
 *      When            Who     Remark
 *      05/12/2008      amy     Create Version 0 porting from windows code.
 *
 *---------------------------------------------------------------------------
 */
static void cmpk_count_tx_status(struct net_device *dev,
                                 cmpk_tx_status_t *pstx_status)
{
        struct r8192_priv *priv = ieee80211_priv(dev);

#ifdef ENABLE_PS

        RT_RF_POWER_STATE       rtstate;

        pAdapter->HalFunc.GetHwRegHandler(pAdapter, HW_VAR_RF_STATE,
                                          (pu1Byte)(&rtState));

        /* When RF is off, we should not count the packet for hw/sw synchronize
         * reason, ie. there may be a duration while sw switch is changed and
         * hw switch is being changed.
         */
        if (rtState == eRfOff)
                return;
#endif

        priv->stats.txfeedbackok        += pstx_status->txok;
        priv->stats.txoktotal           += pstx_status->txok;

        priv->stats.txfeedbackfail      += pstx_status->txfail;
        priv->stats.txerrtotal          += pstx_status->txfail;

        priv->stats.txretrycount        += pstx_status->txretry;
        priv->stats.txfeedbackretry     += pstx_status->txretry;


        priv->stats.txmulticast         += pstx_status->txmcok;
        priv->stats.txbroadcast         += pstx_status->txbcok;
        priv->stats.txunicast           += pstx_status->txucok;

        priv->stats.txerrmulticast      += pstx_status->txmcfail;
        priv->stats.txerrbroadcast      += pstx_status->txbcfail;
        priv->stats.txerrunicast        += pstx_status->txucfail;

        priv->stats.txbytesmulticast    += pstx_status->txmclength;
        priv->stats.txbytesbroadcast    += pstx_status->txbclength;
        priv->stats.txbytesunicast      += pstx_status->txuclength;

        priv->stats.last_packet_rate    = pstx_status->rate;
}

/*-----------------------------------------------------------------------------
 * Function:    cmpk_handle_tx_status()
 *
 * Overview:    Firmware add a new tx feedback status to reduce rx command
 *              packet buffer operation load.
 *
 * Input:               NONE
 *
 * Output:              NONE
 *
 * Return:              NONE
 *
 * Revised History:
 *      When            Who     Remark
 *      05/12/2008      amy     Create Version 0 porting from windows code.
 *
 *---------------------------------------------------------------------------
 */
static void cmpk_handle_tx_status(struct net_device *dev, u8 *pmsg)
{
        cmpk_tx_status_t        rx_tx_sts;

        memcpy((void *)&rx_tx_sts, (void *)pmsg, sizeof(cmpk_tx_status_t));
        /* 2. Use tx feedback info to count TX statistics. */
        cmpk_count_tx_status(dev, &rx_tx_sts);
}

/*-----------------------------------------------------------------------------
 * Function:    cmpk_handle_tx_rate_history()
 *
 * Overview:    Firmware add a new tx rate history
 *
 * Input:               NONE
 *
 * Output:              NONE
 *
 * Return:              NONE
 *
 * Revised History:
 *      When            Who     Remark
 *      05/12/2008      amy     Create Version 0 porting from windows code.
 *
 *---------------------------------------------------------------------------
 */
static void cmpk_handle_tx_rate_history(struct net_device *dev, u8 *pmsg)
{
        cmpk_tx_rahis_t *ptxrate;
        u8              i, j;
        u16             length = sizeof(cmpk_tx_rahis_t);
        u32             *ptemp;
        struct r8192_priv *priv = ieee80211_priv(dev);

#ifdef ENABLE_PS
        pAdapter->HalFunc.GetHwRegHandler(pAdapter, HW_VAR_RF_STATE,
                                          (pu1Byte)(&rtState));

        /* When RF is off, we should not count the packet for hw/sw synchronize
         * reason, ie. there may be a duration while sw switch is changed and
         * hw switch is being changed.
         */
        if (rtState == eRfOff)
                return;
#endif

        ptemp = (u32 *)pmsg;

        /* Do endian transfer to word alignment(16 bits) for windows system.
         * You must do different endian transfer for linux and MAC OS
         */
        for (i = 0; i < (length/4); i++) {
                u16      temp1, temp2;

                temp1 = ptemp[i] & 0x0000FFFF;
                temp2 = ptemp[i] >> 16;
                ptemp[i] = (temp1 << 16) | temp2;
        }

        ptxrate = (cmpk_tx_rahis_t *)pmsg;

        if (ptxrate == NULL)
                return;

        for (i = 0; i < 16; i++) {
                /* Collect CCK rate packet num */
                if (i < 4)
                        priv->stats.txrate.cck[i] += ptxrate->cck[i];

                /* Collect OFDM rate packet num */
                if (i < 8)
                        priv->stats.txrate.ofdm[i] += ptxrate->ofdm[i];

                for (j = 0; j < 4; j++)
                        priv->stats.txrate.ht_mcs[j][i] += ptxrate->ht_mcs[j][i];
        }
}

/*-----------------------------------------------------------------------------
 * Function:    cmpk_message_handle_rx()
 *
 * Overview:    In the function, we will capture different RX command packet
 *              info. Every RX command packet element has different message
 *              length and meaning in content. We only support three type of RX
 *              command packet now. Please refer to document
 *              ws-06-0063-rtl8190-command-packet-specification.
 *
 * Input:       NONE
 *
 * Output:      NONE
 *
 * Return:      NONE
 *
 * Revised History:
 *  When                Who     Remark
 *  05/06/2008          amy     Create Version 0 porting from windows code.
 *
 *---------------------------------------------------------------------------
 */
u32 cmpk_message_handle_rx(struct net_device *dev,
                           struct ieee80211_rx_stats *pstats)
{
        int                     total_length;
        u8                      cmd_length, exe_cnt = 0;
        u8                      element_id;
        u8                      *pcmd_buff;

        /* 0. Check inpt arguments. It is a command queue message or
         * pointer is null.
         */
        if (pstats == NULL)
                return 0;       /* This is not a command packet. */

        /* 1. Read received command packet message length from RFD. */
        total_length = pstats->Length;

        /* 2. Read virtual address from RFD. */
        pcmd_buff = pstats->virtual_address;

        /* 3. Read command packet element id and length. */
        element_id = pcmd_buff[0];

        /* 4. Check every received command packet content according to different
         *    element type. Because FW may aggregate RX command packet to
         *    minimize transmit time between DRV and FW.
         */
        /* Add a counter to prevent the lock in the loop from being held too
         * long
         */
        while (total_length > 0 && exe_cnt++ < 100) {
                /* We support aggregation of different cmd in the same packet */
                element_id = pcmd_buff[0];

                switch (element_id) {
                case RX_TX_FEEDBACK:
                        cmpk_handle_tx_feedback(dev, pcmd_buff);
                        cmd_length = CMPK_RX_TX_FB_SIZE;
                        break;

                case RX_INTERRUPT_STATUS:
                        cmpk_handle_interrupt_status(dev, pcmd_buff);
                        cmd_length = sizeof(struct cmd_pkt_interrupt_status);
                        break;

                case BOTH_QUERY_CONFIG:
                        cmpk_handle_query_config_rx(dev, pcmd_buff);
                        cmd_length = CMPK_BOTH_QUERY_CONFIG_SIZE;
                        break;

                case RX_TX_STATUS:
                        cmpk_handle_tx_status(dev, pcmd_buff);
                        cmd_length = CMPK_RX_TX_STS_SIZE;
                        break;

                case RX_TX_PER_PKT_FEEDBACK:
                        /* You must at lease add a switch case element here,
                         * Otherwise, we will jump to default case.
                         */
                        cmd_length = CMPK_RX_TX_FB_SIZE;
                        break;

                case RX_TX_RATE_HISTORY:
                        cmpk_handle_tx_rate_history(dev, pcmd_buff);
                        cmd_length = CMPK_TX_RAHIS_SIZE;
                        break;

                default:

                        RT_TRACE(COMP_ERR, "---->%s():unknown CMD Element\n",
                                 __func__);
                        return 1;       /* This is a command packet. */
                }

                total_length -= cmd_length;
                pcmd_buff    += cmd_length;
        }
        return  1;      /* This is a command packet. */
}