linux/drivers/tty/moxa.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0+
   2/*****************************************************************************/
   3/*
   4 *           moxa.c  -- MOXA Intellio family multiport serial driver.
   5 *
   6 *      Copyright (C) 1999-2000  Moxa Technologies (support@moxa.com).
   7 *      Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
   8 *
   9 *      This code is loosely based on the Linux serial driver, written by
  10 *      Linus Torvalds, Theodore T'so and others.
  11 */
  12
  13/*
  14 *    MOXA Intellio Series Driver
  15 *      for             : LINUX
  16 *      date            : 1999/1/7
  17 *      version         : 5.1
  18 */
  19
  20#include <linux/module.h>
  21#include <linux/types.h>
  22#include <linux/mm.h>
  23#include <linux/ioport.h>
  24#include <linux/errno.h>
  25#include <linux/firmware.h>
  26#include <linux/signal.h>
  27#include <linux/sched.h>
  28#include <linux/timer.h>
  29#include <linux/interrupt.h>
  30#include <linux/tty.h>
  31#include <linux/tty_flip.h>
  32#include <linux/major.h>
  33#include <linux/string.h>
  34#include <linux/fcntl.h>
  35#include <linux/ptrace.h>
  36#include <linux/serial.h>
  37#include <linux/tty_driver.h>
  38#include <linux/delay.h>
  39#include <linux/pci.h>
  40#include <linux/init.h>
  41#include <linux/bitops.h>
  42#include <linux/slab.h>
  43#include <linux/ratelimit.h>
  44
  45#include <asm/io.h>
  46#include <linux/uaccess.h>
  47
  48#include "moxa.h"
  49
  50#define MOXA_VERSION            "6.0k"
  51
  52#define MOXA_FW_HDRLEN          32
  53
  54#define MOXAMAJOR               172
  55
  56#define MAX_BOARDS              4       /* Don't change this value */
  57#define MAX_PORTS_PER_BOARD     32      /* Don't change this value */
  58#define MAX_PORTS               (MAX_BOARDS * MAX_PORTS_PER_BOARD)
  59
  60#define MOXA_IS_320(brd) ((brd)->boardType == MOXA_BOARD_C320_ISA || \
  61                (brd)->boardType == MOXA_BOARD_C320_PCI)
  62
  63/*
  64 *    Define the Moxa PCI vendor and device IDs.
  65 */
  66#define MOXA_BUS_TYPE_ISA       0
  67#define MOXA_BUS_TYPE_PCI       1
  68
  69enum {
  70        MOXA_BOARD_C218_PCI = 1,
  71        MOXA_BOARD_C218_ISA,
  72        MOXA_BOARD_C320_PCI,
  73        MOXA_BOARD_C320_ISA,
  74        MOXA_BOARD_CP204J,
  75};
  76
  77static char *moxa_brdname[] =
  78{
  79        "C218 Turbo PCI series",
  80        "C218 Turbo ISA series",
  81        "C320 Turbo PCI series",
  82        "C320 Turbo ISA series",
  83        "CP-204J series",
  84};
  85
  86#ifdef CONFIG_PCI
  87static const struct pci_device_id moxa_pcibrds[] = {
  88        { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C218),
  89                .driver_data = MOXA_BOARD_C218_PCI },
  90        { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C320),
  91                .driver_data = MOXA_BOARD_C320_PCI },
  92        { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP204J),
  93                .driver_data = MOXA_BOARD_CP204J },
  94        { 0 }
  95};
  96MODULE_DEVICE_TABLE(pci, moxa_pcibrds);
  97#endif /* CONFIG_PCI */
  98
  99struct moxa_port;
 100
 101static struct moxa_board_conf {
 102        int boardType;
 103        int numPorts;
 104        int busType;
 105
 106        unsigned int ready;
 107
 108        struct moxa_port *ports;
 109
 110        void __iomem *basemem;
 111        void __iomem *intNdx;
 112        void __iomem *intPend;
 113        void __iomem *intTable;
 114} moxa_boards[MAX_BOARDS];
 115
 116struct mxser_mstatus {
 117        tcflag_t cflag;
 118        int cts;
 119        int dsr;
 120        int ri;
 121        int dcd;
 122};
 123
 124struct moxaq_str {
 125        int inq;
 126        int outq;
 127};
 128
 129struct moxa_port {
 130        struct tty_port port;
 131        struct moxa_board_conf *board;
 132        void __iomem *tableAddr;
 133
 134        int type;
 135        int cflag;
 136        unsigned long statusflags;
 137
 138        u8 DCDState;            /* Protected by the port lock */
 139        u8 lineCtrl;
 140        u8 lowChkFlag;
 141};
 142
 143struct mon_str {
 144        int tick;
 145        int rxcnt[MAX_PORTS];
 146        int txcnt[MAX_PORTS];
 147};
 148
 149/* statusflags */
 150#define TXSTOPPED       1
 151#define LOWWAIT         2
 152#define EMPTYWAIT       3
 153
 154
 155#define WAKEUP_CHARS            256
 156
 157static int ttymajor = MOXAMAJOR;
 158static struct mon_str moxaLog;
 159static unsigned int moxaFuncTout = HZ / 2;
 160static unsigned int moxaLowWaterChk;
 161static DEFINE_MUTEX(moxa_openlock);
 162static DEFINE_SPINLOCK(moxa_lock);
 163
 164static unsigned long baseaddr[MAX_BOARDS];
 165static unsigned int type[MAX_BOARDS];
 166static unsigned int numports[MAX_BOARDS];
 167static struct tty_port moxa_service_port;
 168
 169MODULE_AUTHOR("William Chen");
 170MODULE_DESCRIPTION("MOXA Intellio Family Multiport Board Device Driver");
 171MODULE_LICENSE("GPL");
 172MODULE_FIRMWARE("c218tunx.cod");
 173MODULE_FIRMWARE("cp204unx.cod");
 174MODULE_FIRMWARE("c320tunx.cod");
 175
 176module_param_array(type, uint, NULL, 0);
 177MODULE_PARM_DESC(type, "card type: C218=2, C320=4");
 178module_param_hw_array(baseaddr, ulong, ioport, NULL, 0);
 179MODULE_PARM_DESC(baseaddr, "base address");
 180module_param_array(numports, uint, NULL, 0);
 181MODULE_PARM_DESC(numports, "numports (ignored for C218)");
 182
 183module_param(ttymajor, int, 0);
 184
 185/*
 186 * static functions:
 187 */
 188static int moxa_open(struct tty_struct *, struct file *);
 189static void moxa_close(struct tty_struct *, struct file *);
 190static int moxa_write(struct tty_struct *, const unsigned char *, int);
 191static int moxa_write_room(struct tty_struct *);
 192static void moxa_flush_buffer(struct tty_struct *);
 193static int moxa_chars_in_buffer(struct tty_struct *);
 194static void moxa_set_termios(struct tty_struct *, struct ktermios *);
 195static void moxa_stop(struct tty_struct *);
 196static void moxa_start(struct tty_struct *);
 197static void moxa_hangup(struct tty_struct *);
 198static int moxa_tiocmget(struct tty_struct *tty);
 199static int moxa_tiocmset(struct tty_struct *tty,
 200                         unsigned int set, unsigned int clear);
 201static void moxa_poll(struct timer_list *);
 202static void moxa_set_tty_param(struct tty_struct *, struct ktermios *);
 203static void moxa_shutdown(struct tty_port *);
 204static int moxa_carrier_raised(struct tty_port *);
 205static void moxa_dtr_rts(struct tty_port *, int);
 206/*
 207 * moxa board interface functions:
 208 */
 209static void MoxaPortEnable(struct moxa_port *);
 210static void MoxaPortDisable(struct moxa_port *);
 211static int MoxaPortSetTermio(struct moxa_port *, struct ktermios *, speed_t);
 212static int MoxaPortGetLineOut(struct moxa_port *, int *, int *);
 213static void MoxaPortLineCtrl(struct moxa_port *, int, int);
 214static void MoxaPortFlowCtrl(struct moxa_port *, int, int, int, int, int);
 215static int MoxaPortLineStatus(struct moxa_port *);
 216static void MoxaPortFlushData(struct moxa_port *, int);
 217static int MoxaPortWriteData(struct tty_struct *, const unsigned char *, int);
 218static int MoxaPortReadData(struct moxa_port *);
 219static int MoxaPortTxQueue(struct moxa_port *);
 220static int MoxaPortRxQueue(struct moxa_port *);
 221static int MoxaPortTxFree(struct moxa_port *);
 222static void MoxaPortTxDisable(struct moxa_port *);
 223static void MoxaPortTxEnable(struct moxa_port *);
 224static int moxa_get_serial_info(struct tty_struct *, struct serial_struct *);
 225static int moxa_set_serial_info(struct tty_struct *, struct serial_struct *);
 226static void MoxaSetFifo(struct moxa_port *port, int enable);
 227
 228/*
 229 * I/O functions
 230 */
 231
 232static DEFINE_SPINLOCK(moxafunc_lock);
 233
 234static void moxa_wait_finish(void __iomem *ofsAddr)
 235{
 236        unsigned long end = jiffies + moxaFuncTout;
 237
 238        while (readw(ofsAddr + FuncCode) != 0)
 239                if (time_after(jiffies, end))
 240                        return;
 241        if (readw(ofsAddr + FuncCode) != 0)
 242                printk_ratelimited(KERN_WARNING "moxa function expired\n");
 243}
 244
 245static void moxafunc(void __iomem *ofsAddr, u16 cmd, u16 arg)
 246{
 247        unsigned long flags;
 248        spin_lock_irqsave(&moxafunc_lock, flags);
 249        writew(arg, ofsAddr + FuncArg);
 250        writew(cmd, ofsAddr + FuncCode);
 251        moxa_wait_finish(ofsAddr);
 252        spin_unlock_irqrestore(&moxafunc_lock, flags);
 253}
 254
 255static int moxafuncret(void __iomem *ofsAddr, u16 cmd, u16 arg)
 256{
 257        unsigned long flags;
 258        u16 ret;
 259        spin_lock_irqsave(&moxafunc_lock, flags);
 260        writew(arg, ofsAddr + FuncArg);
 261        writew(cmd, ofsAddr + FuncCode);
 262        moxa_wait_finish(ofsAddr);
 263        ret = readw(ofsAddr + FuncArg);
 264        spin_unlock_irqrestore(&moxafunc_lock, flags);
 265        return ret;
 266}
 267
 268static void moxa_low_water_check(void __iomem *ofsAddr)
 269{
 270        u16 rptr, wptr, mask, len;
 271
 272        if (readb(ofsAddr + FlagStat) & Xoff_state) {
 273                rptr = readw(ofsAddr + RXrptr);
 274                wptr = readw(ofsAddr + RXwptr);
 275                mask = readw(ofsAddr + RX_mask);
 276                len = (wptr - rptr) & mask;
 277                if (len <= Low_water)
 278                        moxafunc(ofsAddr, FC_SendXon, 0);
 279        }
 280}
 281
 282/*
 283 * TTY operations
 284 */
 285
 286static int moxa_ioctl(struct tty_struct *tty,
 287                      unsigned int cmd, unsigned long arg)
 288{
 289        struct moxa_port *ch = tty->driver_data;
 290        void __user *argp = (void __user *)arg;
 291        int status, ret = 0;
 292
 293        if (tty->index == MAX_PORTS) {
 294                if (cmd != MOXA_GETDATACOUNT && cmd != MOXA_GET_IOQUEUE &&
 295                                cmd != MOXA_GETMSTATUS)
 296                        return -EINVAL;
 297        } else if (!ch)
 298                return -ENODEV;
 299
 300        switch (cmd) {
 301        case MOXA_GETDATACOUNT:
 302                moxaLog.tick = jiffies;
 303                if (copy_to_user(argp, &moxaLog, sizeof(moxaLog)))
 304                        ret = -EFAULT;
 305                break;
 306        case MOXA_FLUSH_QUEUE:
 307                MoxaPortFlushData(ch, arg);
 308                break;
 309        case MOXA_GET_IOQUEUE: {
 310                struct moxaq_str __user *argm = argp;
 311                struct moxaq_str tmp;
 312                struct moxa_port *p;
 313                unsigned int i, j;
 314
 315                for (i = 0; i < MAX_BOARDS; i++) {
 316                        p = moxa_boards[i].ports;
 317                        for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) {
 318                                memset(&tmp, 0, sizeof(tmp));
 319                                spin_lock_bh(&moxa_lock);
 320                                if (moxa_boards[i].ready) {
 321                                        tmp.inq = MoxaPortRxQueue(p);
 322                                        tmp.outq = MoxaPortTxQueue(p);
 323                                }
 324                                spin_unlock_bh(&moxa_lock);
 325                                if (copy_to_user(argm, &tmp, sizeof(tmp)))
 326                                        return -EFAULT;
 327                        }
 328                }
 329                break;
 330        } case MOXA_GET_OQUEUE:
 331                status = MoxaPortTxQueue(ch);
 332                ret = put_user(status, (unsigned long __user *)argp);
 333                break;
 334        case MOXA_GET_IQUEUE:
 335                status = MoxaPortRxQueue(ch);
 336                ret = put_user(status, (unsigned long __user *)argp);
 337                break;
 338        case MOXA_GETMSTATUS: {
 339                struct mxser_mstatus __user *argm = argp;
 340                struct mxser_mstatus tmp;
 341                struct moxa_port *p;
 342                unsigned int i, j;
 343
 344                for (i = 0; i < MAX_BOARDS; i++) {
 345                        p = moxa_boards[i].ports;
 346                        for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) {
 347                                struct tty_struct *ttyp;
 348                                memset(&tmp, 0, sizeof(tmp));
 349                                spin_lock_bh(&moxa_lock);
 350                                if (!moxa_boards[i].ready) {
 351                                        spin_unlock_bh(&moxa_lock);
 352                                        goto copy;
 353                                }
 354
 355                                status = MoxaPortLineStatus(p);
 356                                spin_unlock_bh(&moxa_lock);
 357
 358                                if (status & 1)
 359                                        tmp.cts = 1;
 360                                if (status & 2)
 361                                        tmp.dsr = 1;
 362                                if (status & 4)
 363                                        tmp.dcd = 1;
 364
 365                                ttyp = tty_port_tty_get(&p->port);
 366                                if (!ttyp)
 367                                        tmp.cflag = p->cflag;
 368                                else
 369                                        tmp.cflag = ttyp->termios.c_cflag;
 370                                tty_kref_put(ttyp);
 371copy:
 372                                if (copy_to_user(argm, &tmp, sizeof(tmp)))
 373                                        return -EFAULT;
 374                        }
 375                }
 376                break;
 377        }
 378        default:
 379                ret = -ENOIOCTLCMD;
 380        }
 381        return ret;
 382}
 383
 384static int moxa_break_ctl(struct tty_struct *tty, int state)
 385{
 386        struct moxa_port *port = tty->driver_data;
 387
 388        moxafunc(port->tableAddr, state ? FC_SendBreak : FC_StopBreak,
 389                        Magic_code);
 390        return 0;
 391}
 392
 393static const struct tty_operations moxa_ops = {
 394        .open = moxa_open,
 395        .close = moxa_close,
 396        .write = moxa_write,
 397        .write_room = moxa_write_room,
 398        .flush_buffer = moxa_flush_buffer,
 399        .chars_in_buffer = moxa_chars_in_buffer,
 400        .ioctl = moxa_ioctl,
 401        .set_termios = moxa_set_termios,
 402        .stop = moxa_stop,
 403        .start = moxa_start,
 404        .hangup = moxa_hangup,
 405        .break_ctl = moxa_break_ctl,
 406        .tiocmget = moxa_tiocmget,
 407        .tiocmset = moxa_tiocmset,
 408        .set_serial = moxa_set_serial_info,
 409        .get_serial = moxa_get_serial_info,
 410};
 411
 412static const struct tty_port_operations moxa_port_ops = {
 413        .carrier_raised = moxa_carrier_raised,
 414        .dtr_rts = moxa_dtr_rts,
 415        .shutdown = moxa_shutdown,
 416};
 417
 418static struct tty_driver *moxaDriver;
 419static DEFINE_TIMER(moxaTimer, moxa_poll);
 420
 421/*
 422 * HW init
 423 */
 424
 425static int moxa_check_fw_model(struct moxa_board_conf *brd, u8 model)
 426{
 427        switch (brd->boardType) {
 428        case MOXA_BOARD_C218_ISA:
 429        case MOXA_BOARD_C218_PCI:
 430                if (model != 1)
 431                        goto err;
 432                break;
 433        case MOXA_BOARD_CP204J:
 434                if (model != 3)
 435                        goto err;
 436                break;
 437        default:
 438                if (model != 2)
 439                        goto err;
 440                break;
 441        }
 442        return 0;
 443err:
 444        return -EINVAL;
 445}
 446
 447static int moxa_check_fw(const void *ptr)
 448{
 449        const __le16 *lptr = ptr;
 450
 451        if (*lptr != cpu_to_le16(0x7980))
 452                return -EINVAL;
 453
 454        return 0;
 455}
 456
 457static int moxa_load_bios(struct moxa_board_conf *brd, const u8 *buf,
 458                size_t len)
 459{
 460        void __iomem *baseAddr = brd->basemem;
 461        u16 tmp;
 462
 463        writeb(HW_reset, baseAddr + Control_reg);       /* reset */
 464        msleep(10);
 465        memset_io(baseAddr, 0, 4096);
 466        memcpy_toio(baseAddr, buf, len);        /* download BIOS */
 467        writeb(0, baseAddr + Control_reg);      /* restart */
 468
 469        msleep(2000);
 470
 471        switch (brd->boardType) {
 472        case MOXA_BOARD_C218_ISA:
 473        case MOXA_BOARD_C218_PCI:
 474                tmp = readw(baseAddr + C218_key);
 475                if (tmp != C218_KeyCode)
 476                        goto err;
 477                break;
 478        case MOXA_BOARD_CP204J:
 479                tmp = readw(baseAddr + C218_key);
 480                if (tmp != CP204J_KeyCode)
 481                        goto err;
 482                break;
 483        default:
 484                tmp = readw(baseAddr + C320_key);
 485                if (tmp != C320_KeyCode)
 486                        goto err;
 487                tmp = readw(baseAddr + C320_status);
 488                if (tmp != STS_init) {
 489                        printk(KERN_ERR "MOXA: bios upload failed -- CPU/Basic "
 490                                        "module not found\n");
 491                        return -EIO;
 492                }
 493                break;
 494        }
 495
 496        return 0;
 497err:
 498        printk(KERN_ERR "MOXA: bios upload failed -- board not found\n");
 499        return -EIO;
 500}
 501
 502static int moxa_load_320b(struct moxa_board_conf *brd, const u8 *ptr,
 503                size_t len)
 504{
 505        void __iomem *baseAddr = brd->basemem;
 506
 507        if (len < 7168) {
 508                printk(KERN_ERR "MOXA: invalid 320 bios -- too short\n");
 509                return -EINVAL;
 510        }
 511
 512        writew(len - 7168 - 2, baseAddr + C320bapi_len);
 513        writeb(1, baseAddr + Control_reg);      /* Select Page 1 */
 514        memcpy_toio(baseAddr + DynPage_addr, ptr, 7168);
 515        writeb(2, baseAddr + Control_reg);      /* Select Page 2 */
 516        memcpy_toio(baseAddr + DynPage_addr, ptr + 7168, len - 7168);
 517
 518        return 0;
 519}
 520
 521static int moxa_real_load_code(struct moxa_board_conf *brd, const void *ptr,
 522                size_t len)
 523{
 524        void __iomem *baseAddr = brd->basemem;
 525        const __le16 *uptr = ptr;
 526        size_t wlen, len2, j;
 527        unsigned long key, loadbuf, loadlen, checksum, checksum_ok;
 528        unsigned int i, retry;
 529        u16 usum, keycode;
 530
 531        keycode = (brd->boardType == MOXA_BOARD_CP204J) ? CP204J_KeyCode :
 532                                C218_KeyCode;
 533
 534        switch (brd->boardType) {
 535        case MOXA_BOARD_CP204J:
 536        case MOXA_BOARD_C218_ISA:
 537        case MOXA_BOARD_C218_PCI:
 538                key = C218_key;
 539                loadbuf = C218_LoadBuf;
 540                loadlen = C218DLoad_len;
 541                checksum = C218check_sum;
 542                checksum_ok = C218chksum_ok;
 543                break;
 544        default:
 545                key = C320_key;
 546                keycode = C320_KeyCode;
 547                loadbuf = C320_LoadBuf;
 548                loadlen = C320DLoad_len;
 549                checksum = C320check_sum;
 550                checksum_ok = C320chksum_ok;
 551                break;
 552        }
 553
 554        usum = 0;
 555        wlen = len >> 1;
 556        for (i = 0; i < wlen; i++)
 557                usum += le16_to_cpu(uptr[i]);
 558        retry = 0;
 559        do {
 560                wlen = len >> 1;
 561                j = 0;
 562                while (wlen) {
 563                        len2 = (wlen > 2048) ? 2048 : wlen;
 564                        wlen -= len2;
 565                        memcpy_toio(baseAddr + loadbuf, ptr + j, len2 << 1);
 566                        j += len2 << 1;
 567
 568                        writew(len2, baseAddr + loadlen);
 569                        writew(0, baseAddr + key);
 570                        for (i = 0; i < 100; i++) {
 571                                if (readw(baseAddr + key) == keycode)
 572                                        break;
 573                                msleep(10);
 574                        }
 575                        if (readw(baseAddr + key) != keycode)
 576                                return -EIO;
 577                }
 578                writew(0, baseAddr + loadlen);
 579                writew(usum, baseAddr + checksum);
 580                writew(0, baseAddr + key);
 581                for (i = 0; i < 100; i++) {
 582                        if (readw(baseAddr + key) == keycode)
 583                                break;
 584                        msleep(10);
 585                }
 586                retry++;
 587        } while ((readb(baseAddr + checksum_ok) != 1) && (retry < 3));
 588        if (readb(baseAddr + checksum_ok) != 1)
 589                return -EIO;
 590
 591        writew(0, baseAddr + key);
 592        for (i = 0; i < 600; i++) {
 593                if (readw(baseAddr + Magic_no) == Magic_code)
 594                        break;
 595                msleep(10);
 596        }
 597        if (readw(baseAddr + Magic_no) != Magic_code)
 598                return -EIO;
 599
 600        if (MOXA_IS_320(brd)) {
 601                if (brd->busType == MOXA_BUS_TYPE_PCI) {        /* ASIC board */
 602                        writew(0x3800, baseAddr + TMS320_PORT1);
 603                        writew(0x3900, baseAddr + TMS320_PORT2);
 604                        writew(28499, baseAddr + TMS320_CLOCK);
 605                } else {
 606                        writew(0x3200, baseAddr + TMS320_PORT1);
 607                        writew(0x3400, baseAddr + TMS320_PORT2);
 608                        writew(19999, baseAddr + TMS320_CLOCK);
 609                }
 610        }
 611        writew(1, baseAddr + Disable_IRQ);
 612        writew(0, baseAddr + Magic_no);
 613        for (i = 0; i < 500; i++) {
 614                if (readw(baseAddr + Magic_no) == Magic_code)
 615                        break;
 616                msleep(10);
 617        }
 618        if (readw(baseAddr + Magic_no) != Magic_code)
 619                return -EIO;
 620
 621        if (MOXA_IS_320(brd)) {
 622                j = readw(baseAddr + Module_cnt);
 623                if (j <= 0)
 624                        return -EIO;
 625                brd->numPorts = j * 8;
 626                writew(j, baseAddr + Module_no);
 627                writew(0, baseAddr + Magic_no);
 628                for (i = 0; i < 600; i++) {
 629                        if (readw(baseAddr + Magic_no) == Magic_code)
 630                                break;
 631                        msleep(10);
 632                }
 633                if (readw(baseAddr + Magic_no) != Magic_code)
 634                        return -EIO;
 635        }
 636        brd->intNdx = baseAddr + IRQindex;
 637        brd->intPend = baseAddr + IRQpending;
 638        brd->intTable = baseAddr + IRQtable;
 639
 640        return 0;
 641}
 642
 643static int moxa_load_code(struct moxa_board_conf *brd, const void *ptr,
 644                size_t len)
 645{
 646        void __iomem *ofsAddr, *baseAddr = brd->basemem;
 647        struct moxa_port *port;
 648        int retval, i;
 649
 650        if (len % 2) {
 651                printk(KERN_ERR "MOXA: bios length is not even\n");
 652                return -EINVAL;
 653        }
 654
 655        retval = moxa_real_load_code(brd, ptr, len); /* may change numPorts */
 656        if (retval)
 657                return retval;
 658
 659        switch (brd->boardType) {
 660        case MOXA_BOARD_C218_ISA:
 661        case MOXA_BOARD_C218_PCI:
 662        case MOXA_BOARD_CP204J:
 663                port = brd->ports;
 664                for (i = 0; i < brd->numPorts; i++, port++) {
 665                        port->board = brd;
 666                        port->DCDState = 0;
 667                        port->tableAddr = baseAddr + Extern_table +
 668                                        Extern_size * i;
 669                        ofsAddr = port->tableAddr;
 670                        writew(C218rx_mask, ofsAddr + RX_mask);
 671                        writew(C218tx_mask, ofsAddr + TX_mask);
 672                        writew(C218rx_spage + i * C218buf_pageno, ofsAddr + Page_rxb);
 673                        writew(readw(ofsAddr + Page_rxb) + C218rx_pageno, ofsAddr + EndPage_rxb);
 674
 675                        writew(C218tx_spage + i * C218buf_pageno, ofsAddr + Page_txb);
 676                        writew(readw(ofsAddr + Page_txb) + C218tx_pageno, ofsAddr + EndPage_txb);
 677
 678                }
 679                break;
 680        default:
 681                port = brd->ports;
 682                for (i = 0; i < brd->numPorts; i++, port++) {
 683                        port->board = brd;
 684                        port->DCDState = 0;
 685                        port->tableAddr = baseAddr + Extern_table +
 686                                        Extern_size * i;
 687                        ofsAddr = port->tableAddr;
 688                        switch (brd->numPorts) {
 689                        case 8:
 690                                writew(C320p8rx_mask, ofsAddr + RX_mask);
 691                                writew(C320p8tx_mask, ofsAddr + TX_mask);
 692                                writew(C320p8rx_spage + i * C320p8buf_pgno, ofsAddr + Page_rxb);
 693                                writew(readw(ofsAddr + Page_rxb) + C320p8rx_pgno, ofsAddr + EndPage_rxb);
 694                                writew(C320p8tx_spage + i * C320p8buf_pgno, ofsAddr + Page_txb);
 695                                writew(readw(ofsAddr + Page_txb) + C320p8tx_pgno, ofsAddr + EndPage_txb);
 696
 697                                break;
 698                        case 16:
 699                                writew(C320p16rx_mask, ofsAddr + RX_mask);
 700                                writew(C320p16tx_mask, ofsAddr + TX_mask);
 701                                writew(C320p16rx_spage + i * C320p16buf_pgno, ofsAddr + Page_rxb);
 702                                writew(readw(ofsAddr + Page_rxb) + C320p16rx_pgno, ofsAddr + EndPage_rxb);
 703                                writew(C320p16tx_spage + i * C320p16buf_pgno, ofsAddr + Page_txb);
 704                                writew(readw(ofsAddr + Page_txb) + C320p16tx_pgno, ofsAddr + EndPage_txb);
 705                                break;
 706
 707                        case 24:
 708                                writew(C320p24rx_mask, ofsAddr + RX_mask);
 709                                writew(C320p24tx_mask, ofsAddr + TX_mask);
 710                                writew(C320p24rx_spage + i * C320p24buf_pgno, ofsAddr + Page_rxb);
 711                                writew(readw(ofsAddr + Page_rxb) + C320p24rx_pgno, ofsAddr + EndPage_rxb);
 712                                writew(C320p24tx_spage + i * C320p24buf_pgno, ofsAddr + Page_txb);
 713                                writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb);
 714                                break;
 715                        case 32:
 716                                writew(C320p32rx_mask, ofsAddr + RX_mask);
 717                                writew(C320p32tx_mask, ofsAddr + TX_mask);
 718                                writew(C320p32tx_ofs, ofsAddr + Ofs_txb);
 719                                writew(C320p32rx_spage + i * C320p32buf_pgno, ofsAddr + Page_rxb);
 720                                writew(readb(ofsAddr + Page_rxb), ofsAddr + EndPage_rxb);
 721                                writew(C320p32tx_spage + i * C320p32buf_pgno, ofsAddr + Page_txb);
 722                                writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb);
 723                                break;
 724                        }
 725                }
 726                break;
 727        }
 728        return 0;
 729}
 730
 731static int moxa_load_fw(struct moxa_board_conf *brd, const struct firmware *fw)
 732{
 733        const void *ptr = fw->data;
 734        char rsn[64];
 735        u16 lens[5];
 736        size_t len;
 737        unsigned int a, lenp, lencnt;
 738        int ret = -EINVAL;
 739        struct {
 740                __le32 magic;   /* 0x34303430 */
 741                u8 reserved1[2];
 742                u8 type;        /* UNIX = 3 */
 743                u8 model;       /* C218T=1, C320T=2, CP204=3 */
 744                u8 reserved2[8];
 745                __le16 len[5];
 746        } const *hdr = ptr;
 747
 748        BUILD_BUG_ON(ARRAY_SIZE(hdr->len) != ARRAY_SIZE(lens));
 749
 750        if (fw->size < MOXA_FW_HDRLEN) {
 751                strcpy(rsn, "too short (even header won't fit)");
 752                goto err;
 753        }
 754        if (hdr->magic != cpu_to_le32(0x30343034)) {
 755                sprintf(rsn, "bad magic: %.8x", le32_to_cpu(hdr->magic));
 756                goto err;
 757        }
 758        if (hdr->type != 3) {
 759                sprintf(rsn, "not for linux, type is %u", hdr->type);
 760                goto err;
 761        }
 762        if (moxa_check_fw_model(brd, hdr->model)) {
 763                sprintf(rsn, "not for this card, model is %u", hdr->model);
 764                goto err;
 765        }
 766
 767        len = MOXA_FW_HDRLEN;
 768        lencnt = hdr->model == 2 ? 5 : 3;
 769        for (a = 0; a < ARRAY_SIZE(lens); a++) {
 770                lens[a] = le16_to_cpu(hdr->len[a]);
 771                if (lens[a] && len + lens[a] <= fw->size &&
 772                                moxa_check_fw(&fw->data[len]))
 773                        printk(KERN_WARNING "MOXA firmware: unexpected input "
 774                                "at offset %u, but going on\n", (u32)len);
 775                if (!lens[a] && a < lencnt) {
 776                        sprintf(rsn, "too few entries in fw file");
 777                        goto err;
 778                }
 779                len += lens[a];
 780        }
 781
 782        if (len != fw->size) {
 783                sprintf(rsn, "bad length: %u (should be %u)", (u32)fw->size,
 784                                (u32)len);
 785                goto err;
 786        }
 787
 788        ptr += MOXA_FW_HDRLEN;
 789        lenp = 0; /* bios */
 790
 791        strcpy(rsn, "read above");
 792
 793        ret = moxa_load_bios(brd, ptr, lens[lenp]);
 794        if (ret)
 795                goto err;
 796
 797        /* we skip the tty section (lens[1]), since we don't need it */
 798        ptr += lens[lenp] + lens[lenp + 1];
 799        lenp += 2; /* comm */
 800
 801        if (hdr->model == 2) {
 802                ret = moxa_load_320b(brd, ptr, lens[lenp]);
 803                if (ret)
 804                        goto err;
 805                /* skip another tty */
 806                ptr += lens[lenp] + lens[lenp + 1];
 807                lenp += 2;
 808        }
 809
 810        ret = moxa_load_code(brd, ptr, lens[lenp]);
 811        if (ret)
 812                goto err;
 813
 814        return 0;
 815err:
 816        printk(KERN_ERR "firmware failed to load, reason: %s\n", rsn);
 817        return ret;
 818}
 819
 820static int moxa_init_board(struct moxa_board_conf *brd, struct device *dev)
 821{
 822        const struct firmware *fw;
 823        const char *file;
 824        struct moxa_port *p;
 825        unsigned int i, first_idx;
 826        int ret;
 827
 828        brd->ports = kcalloc(MAX_PORTS_PER_BOARD, sizeof(*brd->ports),
 829                        GFP_KERNEL);
 830        if (brd->ports == NULL) {
 831                printk(KERN_ERR "cannot allocate memory for ports\n");
 832                ret = -ENOMEM;
 833                goto err;
 834        }
 835
 836        for (i = 0, p = brd->ports; i < MAX_PORTS_PER_BOARD; i++, p++) {
 837                tty_port_init(&p->port);
 838                p->port.ops = &moxa_port_ops;
 839                p->type = PORT_16550A;
 840                p->cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
 841        }
 842
 843        switch (brd->boardType) {
 844        case MOXA_BOARD_C218_ISA:
 845        case MOXA_BOARD_C218_PCI:
 846                file = "c218tunx.cod";
 847                break;
 848        case MOXA_BOARD_CP204J:
 849                file = "cp204unx.cod";
 850                break;
 851        default:
 852                file = "c320tunx.cod";
 853                break;
 854        }
 855
 856        ret = request_firmware(&fw, file, dev);
 857        if (ret) {
 858                printk(KERN_ERR "MOXA: request_firmware failed. Make sure "
 859                                "you've placed '%s' file into your firmware "
 860                                "loader directory (e.g. /lib/firmware)\n",
 861                                file);
 862                goto err_free;
 863        }
 864
 865        ret = moxa_load_fw(brd, fw);
 866
 867        release_firmware(fw);
 868
 869        if (ret)
 870                goto err_free;
 871
 872        spin_lock_bh(&moxa_lock);
 873        brd->ready = 1;
 874        if (!timer_pending(&moxaTimer))
 875                mod_timer(&moxaTimer, jiffies + HZ / 50);
 876        spin_unlock_bh(&moxa_lock);
 877
 878        first_idx = (brd - moxa_boards) * MAX_PORTS_PER_BOARD;
 879        for (i = 0; i < brd->numPorts; i++)
 880                tty_port_register_device(&brd->ports[i].port, moxaDriver,
 881                                first_idx + i, dev);
 882
 883        return 0;
 884err_free:
 885        for (i = 0; i < MAX_PORTS_PER_BOARD; i++)
 886                tty_port_destroy(&brd->ports[i].port);
 887        kfree(brd->ports);
 888err:
 889        return ret;
 890}
 891
 892static void moxa_board_deinit(struct moxa_board_conf *brd)
 893{
 894        unsigned int a, opened, first_idx;
 895
 896        mutex_lock(&moxa_openlock);
 897        spin_lock_bh(&moxa_lock);
 898        brd->ready = 0;
 899        spin_unlock_bh(&moxa_lock);
 900
 901        /* pci hot-un-plug support */
 902        for (a = 0; a < brd->numPorts; a++)
 903                if (tty_port_initialized(&brd->ports[a].port))
 904                        tty_port_tty_hangup(&brd->ports[a].port, false);
 905
 906        for (a = 0; a < MAX_PORTS_PER_BOARD; a++)
 907                tty_port_destroy(&brd->ports[a].port);
 908
 909        while (1) {
 910                opened = 0;
 911                for (a = 0; a < brd->numPorts; a++)
 912                        if (tty_port_initialized(&brd->ports[a].port))
 913                                opened++;
 914                mutex_unlock(&moxa_openlock);
 915                if (!opened)
 916                        break;
 917                msleep(50);
 918                mutex_lock(&moxa_openlock);
 919        }
 920
 921        first_idx = (brd - moxa_boards) * MAX_PORTS_PER_BOARD;
 922        for (a = 0; a < brd->numPorts; a++)
 923                tty_unregister_device(moxaDriver, first_idx + a);
 924
 925        iounmap(brd->basemem);
 926        brd->basemem = NULL;
 927        kfree(brd->ports);
 928}
 929
 930#ifdef CONFIG_PCI
 931static int moxa_pci_probe(struct pci_dev *pdev,
 932                const struct pci_device_id *ent)
 933{
 934        struct moxa_board_conf *board;
 935        unsigned int i;
 936        int board_type = ent->driver_data;
 937        int retval;
 938
 939        retval = pci_enable_device(pdev);
 940        if (retval) {
 941                dev_err(&pdev->dev, "can't enable pci device\n");
 942                goto err;
 943        }
 944
 945        for (i = 0; i < MAX_BOARDS; i++)
 946                if (moxa_boards[i].basemem == NULL)
 947                        break;
 948
 949        retval = -ENODEV;
 950        if (i >= MAX_BOARDS) {
 951                dev_warn(&pdev->dev, "more than %u MOXA Intellio family boards "
 952                                "found. Board is ignored.\n", MAX_BOARDS);
 953                goto err;
 954        }
 955
 956        board = &moxa_boards[i];
 957
 958        retval = pci_request_region(pdev, 2, "moxa-base");
 959        if (retval) {
 960                dev_err(&pdev->dev, "can't request pci region 2\n");
 961                goto err;
 962        }
 963
 964        board->basemem = ioremap_nocache(pci_resource_start(pdev, 2), 0x4000);
 965        if (board->basemem == NULL) {
 966                dev_err(&pdev->dev, "can't remap io space 2\n");
 967                retval = -ENOMEM;
 968                goto err_reg;
 969        }
 970
 971        board->boardType = board_type;
 972        switch (board_type) {
 973        case MOXA_BOARD_C218_ISA:
 974        case MOXA_BOARD_C218_PCI:
 975                board->numPorts = 8;
 976                break;
 977
 978        case MOXA_BOARD_CP204J:
 979                board->numPorts = 4;
 980                break;
 981        default:
 982                board->numPorts = 0;
 983                break;
 984        }
 985        board->busType = MOXA_BUS_TYPE_PCI;
 986
 987        retval = moxa_init_board(board, &pdev->dev);
 988        if (retval)
 989                goto err_base;
 990
 991        pci_set_drvdata(pdev, board);
 992
 993        dev_info(&pdev->dev, "board '%s' ready (%u ports, firmware loaded)\n",
 994                        moxa_brdname[board_type - 1], board->numPorts);
 995
 996        return 0;
 997err_base:
 998        iounmap(board->basemem);
 999        board->basemem = NULL;
1000err_reg:
1001        pci_release_region(pdev, 2);
1002err:
1003        return retval;
1004}
1005
1006static void moxa_pci_remove(struct pci_dev *pdev)
1007{
1008        struct moxa_board_conf *brd = pci_get_drvdata(pdev);
1009
1010        moxa_board_deinit(brd);
1011
1012        pci_release_region(pdev, 2);
1013}
1014
1015static struct pci_driver moxa_pci_driver = {
1016        .name = "moxa",
1017        .id_table = moxa_pcibrds,
1018        .probe = moxa_pci_probe,
1019        .remove = moxa_pci_remove
1020};
1021#endif /* CONFIG_PCI */
1022
1023static int __init moxa_init(void)
1024{
1025        unsigned int isabrds = 0;
1026        int retval = 0;
1027        struct moxa_board_conf *brd = moxa_boards;
1028        unsigned int i;
1029
1030        printk(KERN_INFO "MOXA Intellio family driver version %s\n",
1031                        MOXA_VERSION);
1032
1033        tty_port_init(&moxa_service_port);
1034
1035        moxaDriver = tty_alloc_driver(MAX_PORTS + 1,
1036                        TTY_DRIVER_REAL_RAW |
1037                        TTY_DRIVER_DYNAMIC_DEV);
1038        if (IS_ERR(moxaDriver))
1039                return PTR_ERR(moxaDriver);
1040
1041        moxaDriver->name = "ttyMX";
1042        moxaDriver->major = ttymajor;
1043        moxaDriver->minor_start = 0;
1044        moxaDriver->type = TTY_DRIVER_TYPE_SERIAL;
1045        moxaDriver->subtype = SERIAL_TYPE_NORMAL;
1046        moxaDriver->init_termios = tty_std_termios;
1047        moxaDriver->init_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
1048        moxaDriver->init_termios.c_ispeed = 9600;
1049        moxaDriver->init_termios.c_ospeed = 9600;
1050        tty_set_operations(moxaDriver, &moxa_ops);
1051        /* Having one more port only for ioctls is ugly */
1052        tty_port_link_device(&moxa_service_port, moxaDriver, MAX_PORTS);
1053
1054        if (tty_register_driver(moxaDriver)) {
1055                printk(KERN_ERR "can't register MOXA Smartio tty driver!\n");
1056                put_tty_driver(moxaDriver);
1057                return -1;
1058        }
1059
1060        /* Find the boards defined from module args. */
1061
1062        for (i = 0; i < MAX_BOARDS; i++) {
1063                if (!baseaddr[i])
1064                        break;
1065                if (type[i] == MOXA_BOARD_C218_ISA ||
1066                                type[i] == MOXA_BOARD_C320_ISA) {
1067                        pr_debug("Moxa board %2d: %s board(baseAddr=%lx)\n",
1068                                        isabrds + 1, moxa_brdname[type[i] - 1],
1069                                        baseaddr[i]);
1070                        brd->boardType = type[i];
1071                        brd->numPorts = type[i] == MOXA_BOARD_C218_ISA ? 8 :
1072                                        numports[i];
1073                        brd->busType = MOXA_BUS_TYPE_ISA;
1074                        brd->basemem = ioremap_nocache(baseaddr[i], 0x4000);
1075                        if (!brd->basemem) {
1076                                printk(KERN_ERR "MOXA: can't remap %lx\n",
1077                                                baseaddr[i]);
1078                                continue;
1079                        }
1080                        if (moxa_init_board(brd, NULL)) {
1081                                iounmap(brd->basemem);
1082                                brd->basemem = NULL;
1083                                continue;
1084                        }
1085
1086                        printk(KERN_INFO "MOXA isa board found at 0x%.8lx and "
1087                                        "ready (%u ports, firmware loaded)\n",
1088                                        baseaddr[i], brd->numPorts);
1089
1090                        brd++;
1091                        isabrds++;
1092                }
1093        }
1094
1095#ifdef CONFIG_PCI
1096        retval = pci_register_driver(&moxa_pci_driver);
1097        if (retval) {
1098                printk(KERN_ERR "Can't register MOXA pci driver!\n");
1099                if (isabrds)
1100                        retval = 0;
1101        }
1102#endif
1103
1104        return retval;
1105}
1106
1107static void __exit moxa_exit(void)
1108{
1109        unsigned int i;
1110
1111#ifdef CONFIG_PCI
1112        pci_unregister_driver(&moxa_pci_driver);
1113#endif
1114
1115        for (i = 0; i < MAX_BOARDS; i++) /* ISA boards */
1116                if (moxa_boards[i].ready)
1117                        moxa_board_deinit(&moxa_boards[i]);
1118
1119        del_timer_sync(&moxaTimer);
1120
1121        if (tty_unregister_driver(moxaDriver))
1122                printk(KERN_ERR "Couldn't unregister MOXA Intellio family "
1123                                "serial driver\n");
1124        put_tty_driver(moxaDriver);
1125}
1126
1127module_init(moxa_init);
1128module_exit(moxa_exit);
1129
1130static void moxa_shutdown(struct tty_port *port)
1131{
1132        struct moxa_port *ch = container_of(port, struct moxa_port, port);
1133        MoxaPortDisable(ch);
1134        MoxaPortFlushData(ch, 2);
1135}
1136
1137static int moxa_carrier_raised(struct tty_port *port)
1138{
1139        struct moxa_port *ch = container_of(port, struct moxa_port, port);
1140        int dcd;
1141
1142        spin_lock_irq(&port->lock);
1143        dcd = ch->DCDState;
1144        spin_unlock_irq(&port->lock);
1145        return dcd;
1146}
1147
1148static void moxa_dtr_rts(struct tty_port *port, int onoff)
1149{
1150        struct moxa_port *ch = container_of(port, struct moxa_port, port);
1151        MoxaPortLineCtrl(ch, onoff, onoff);
1152}
1153
1154
1155static int moxa_open(struct tty_struct *tty, struct file *filp)
1156{
1157        struct moxa_board_conf *brd;
1158        struct moxa_port *ch;
1159        int port;
1160
1161        port = tty->index;
1162        if (port == MAX_PORTS) {
1163                return capable(CAP_SYS_ADMIN) ? 0 : -EPERM;
1164        }
1165        if (mutex_lock_interruptible(&moxa_openlock))
1166                return -ERESTARTSYS;
1167        brd = &moxa_boards[port / MAX_PORTS_PER_BOARD];
1168        if (!brd->ready) {
1169                mutex_unlock(&moxa_openlock);
1170                return -ENODEV;
1171        }
1172
1173        if (port % MAX_PORTS_PER_BOARD >= brd->numPorts) {
1174                mutex_unlock(&moxa_openlock);
1175                return -ENODEV;
1176        }
1177
1178        ch = &brd->ports[port % MAX_PORTS_PER_BOARD];
1179        ch->port.count++;
1180        tty->driver_data = ch;
1181        tty_port_tty_set(&ch->port, tty);
1182        mutex_lock(&ch->port.mutex);
1183        if (!tty_port_initialized(&ch->port)) {
1184                ch->statusflags = 0;
1185                moxa_set_tty_param(tty, &tty->termios);
1186                MoxaPortLineCtrl(ch, 1, 1);
1187                MoxaPortEnable(ch);
1188                MoxaSetFifo(ch, ch->type == PORT_16550A);
1189                tty_port_set_initialized(&ch->port, 1);
1190        }
1191        mutex_unlock(&ch->port.mutex);
1192        mutex_unlock(&moxa_openlock);
1193
1194        return tty_port_block_til_ready(&ch->port, tty, filp);
1195}
1196
1197static void moxa_close(struct tty_struct *tty, struct file *filp)
1198{
1199        struct moxa_port *ch = tty->driver_data;
1200        ch->cflag = tty->termios.c_cflag;
1201        tty_port_close(&ch->port, tty, filp);
1202}
1203
1204static int moxa_write(struct tty_struct *tty,
1205                      const unsigned char *buf, int count)
1206{
1207        struct moxa_port *ch = tty->driver_data;
1208        unsigned long flags;
1209        int len;
1210
1211        if (ch == NULL)
1212                return 0;
1213
1214        spin_lock_irqsave(&moxa_lock, flags);
1215        len = MoxaPortWriteData(tty, buf, count);
1216        spin_unlock_irqrestore(&moxa_lock, flags);
1217
1218        set_bit(LOWWAIT, &ch->statusflags);
1219        return len;
1220}
1221
1222static int moxa_write_room(struct tty_struct *tty)
1223{
1224        struct moxa_port *ch;
1225
1226        if (tty->stopped)
1227                return 0;
1228        ch = tty->driver_data;
1229        if (ch == NULL)
1230                return 0;
1231        return MoxaPortTxFree(ch);
1232}
1233
1234static void moxa_flush_buffer(struct tty_struct *tty)
1235{
1236        struct moxa_port *ch = tty->driver_data;
1237
1238        if (ch == NULL)
1239                return;
1240        MoxaPortFlushData(ch, 1);
1241        tty_wakeup(tty);
1242}
1243
1244static int moxa_chars_in_buffer(struct tty_struct *tty)
1245{
1246        struct moxa_port *ch = tty->driver_data;
1247        int chars;
1248
1249        chars = MoxaPortTxQueue(ch);
1250        if (chars)
1251                /*
1252                 * Make it possible to wakeup anything waiting for output
1253                 * in tty_ioctl.c, etc.
1254                 */
1255                set_bit(EMPTYWAIT, &ch->statusflags);
1256        return chars;
1257}
1258
1259static int moxa_tiocmget(struct tty_struct *tty)
1260{
1261        struct moxa_port *ch = tty->driver_data;
1262        int flag = 0, dtr, rts;
1263
1264        MoxaPortGetLineOut(ch, &dtr, &rts);
1265        if (dtr)
1266                flag |= TIOCM_DTR;
1267        if (rts)
1268                flag |= TIOCM_RTS;
1269        dtr = MoxaPortLineStatus(ch);
1270        if (dtr & 1)
1271                flag |= TIOCM_CTS;
1272        if (dtr & 2)
1273                flag |= TIOCM_DSR;
1274        if (dtr & 4)
1275                flag |= TIOCM_CD;
1276        return flag;
1277}
1278
1279static int moxa_tiocmset(struct tty_struct *tty,
1280                         unsigned int set, unsigned int clear)
1281{
1282        struct moxa_port *ch;
1283        int dtr, rts;
1284
1285        mutex_lock(&moxa_openlock);
1286        ch = tty->driver_data;
1287        if (!ch) {
1288                mutex_unlock(&moxa_openlock);
1289                return -EINVAL;
1290        }
1291
1292        MoxaPortGetLineOut(ch, &dtr, &rts);
1293        if (set & TIOCM_RTS)
1294                rts = 1;
1295        if (set & TIOCM_DTR)
1296                dtr = 1;
1297        if (clear & TIOCM_RTS)
1298                rts = 0;
1299        if (clear & TIOCM_DTR)
1300                dtr = 0;
1301        MoxaPortLineCtrl(ch, dtr, rts);
1302        mutex_unlock(&moxa_openlock);
1303        return 0;
1304}
1305
1306static void moxa_set_termios(struct tty_struct *tty,
1307                struct ktermios *old_termios)
1308{
1309        struct moxa_port *ch = tty->driver_data;
1310
1311        if (ch == NULL)
1312                return;
1313        moxa_set_tty_param(tty, old_termios);
1314        if (!(old_termios->c_cflag & CLOCAL) && C_CLOCAL(tty))
1315                wake_up_interruptible(&ch->port.open_wait);
1316}
1317
1318static void moxa_stop(struct tty_struct *tty)
1319{
1320        struct moxa_port *ch = tty->driver_data;
1321
1322        if (ch == NULL)
1323                return;
1324        MoxaPortTxDisable(ch);
1325        set_bit(TXSTOPPED, &ch->statusflags);
1326}
1327
1328
1329static void moxa_start(struct tty_struct *tty)
1330{
1331        struct moxa_port *ch = tty->driver_data;
1332
1333        if (ch == NULL)
1334                return;
1335
1336        if (!test_bit(TXSTOPPED, &ch->statusflags))
1337                return;
1338
1339        MoxaPortTxEnable(ch);
1340        clear_bit(TXSTOPPED, &ch->statusflags);
1341}
1342
1343static void moxa_hangup(struct tty_struct *tty)
1344{
1345        struct moxa_port *ch = tty->driver_data;
1346        tty_port_hangup(&ch->port);
1347}
1348
1349static void moxa_new_dcdstate(struct moxa_port *p, u8 dcd)
1350{
1351        unsigned long flags;
1352        dcd = !!dcd;
1353
1354        spin_lock_irqsave(&p->port.lock, flags);
1355        if (dcd != p->DCDState) {
1356                p->DCDState = dcd;
1357                spin_unlock_irqrestore(&p->port.lock, flags);
1358                if (!dcd)
1359                        tty_port_tty_hangup(&p->port, true);
1360        }
1361        else
1362                spin_unlock_irqrestore(&p->port.lock, flags);
1363}
1364
1365static int moxa_poll_port(struct moxa_port *p, unsigned int handle,
1366                u16 __iomem *ip)
1367{
1368        struct tty_struct *tty = tty_port_tty_get(&p->port);
1369        void __iomem *ofsAddr;
1370        unsigned int inited = tty_port_initialized(&p->port);
1371        u16 intr;
1372
1373        if (tty) {
1374                if (test_bit(EMPTYWAIT, &p->statusflags) &&
1375                                MoxaPortTxQueue(p) == 0) {
1376                        clear_bit(EMPTYWAIT, &p->statusflags);
1377                        tty_wakeup(tty);
1378                }
1379                if (test_bit(LOWWAIT, &p->statusflags) && !tty->stopped &&
1380                                MoxaPortTxQueue(p) <= WAKEUP_CHARS) {
1381                        clear_bit(LOWWAIT, &p->statusflags);
1382                        tty_wakeup(tty);
1383                }
1384
1385                if (inited && !tty_throttled(tty) &&
1386                                MoxaPortRxQueue(p) > 0) { /* RX */
1387                        MoxaPortReadData(p);
1388                        tty_schedule_flip(&p->port);
1389                }
1390        } else {
1391                clear_bit(EMPTYWAIT, &p->statusflags);
1392                MoxaPortFlushData(p, 0); /* flush RX */
1393        }
1394
1395        if (!handle) /* nothing else to do */
1396                goto put;
1397
1398        intr = readw(ip); /* port irq status */
1399        if (intr == 0)
1400                goto put;
1401
1402        writew(0, ip); /* ACK port */
1403        ofsAddr = p->tableAddr;
1404        if (intr & IntrTx) /* disable tx intr */
1405                writew(readw(ofsAddr + HostStat) & ~WakeupTx,
1406                                ofsAddr + HostStat);
1407
1408        if (!inited)
1409                goto put;
1410
1411        if (tty && (intr & IntrBreak) && !I_IGNBRK(tty)) { /* BREAK */
1412                tty_insert_flip_char(&p->port, 0, TTY_BREAK);
1413                tty_schedule_flip(&p->port);
1414        }
1415
1416        if (intr & IntrLine)
1417                moxa_new_dcdstate(p, readb(ofsAddr + FlagStat) & DCD_state);
1418put:
1419        tty_kref_put(tty);
1420
1421        return 0;
1422}
1423
1424static void moxa_poll(struct timer_list *unused)
1425{
1426        struct moxa_board_conf *brd;
1427        u16 __iomem *ip;
1428        unsigned int card, port, served = 0;
1429
1430        spin_lock(&moxa_lock);
1431        for (card = 0; card < MAX_BOARDS; card++) {
1432                brd = &moxa_boards[card];
1433                if (!brd->ready)
1434                        continue;
1435
1436                served++;
1437
1438                ip = NULL;
1439                if (readb(brd->intPend) == 0xff)
1440                        ip = brd->intTable + readb(brd->intNdx);
1441
1442                for (port = 0; port < brd->numPorts; port++)
1443                        moxa_poll_port(&brd->ports[port], !!ip, ip + port);
1444
1445                if (ip)
1446                        writeb(0, brd->intPend); /* ACK */
1447
1448                if (moxaLowWaterChk) {
1449                        struct moxa_port *p = brd->ports;
1450                        for (port = 0; port < brd->numPorts; port++, p++)
1451                                if (p->lowChkFlag) {
1452                                        p->lowChkFlag = 0;
1453                                        moxa_low_water_check(p->tableAddr);
1454                                }
1455                }
1456        }
1457        moxaLowWaterChk = 0;
1458
1459        if (served)
1460                mod_timer(&moxaTimer, jiffies + HZ / 50);
1461        spin_unlock(&moxa_lock);
1462}
1463
1464/******************************************************************************/
1465
1466static void moxa_set_tty_param(struct tty_struct *tty, struct ktermios *old_termios)
1467{
1468        register struct ktermios *ts = &tty->termios;
1469        struct moxa_port *ch = tty->driver_data;
1470        int rts, cts, txflow, rxflow, xany, baud;
1471
1472        rts = cts = txflow = rxflow = xany = 0;
1473        if (ts->c_cflag & CRTSCTS)
1474                rts = cts = 1;
1475        if (ts->c_iflag & IXON)
1476                txflow = 1;
1477        if (ts->c_iflag & IXOFF)
1478                rxflow = 1;
1479        if (ts->c_iflag & IXANY)
1480                xany = 1;
1481
1482        MoxaPortFlowCtrl(ch, rts, cts, txflow, rxflow, xany);
1483        baud = MoxaPortSetTermio(ch, ts, tty_get_baud_rate(tty));
1484        if (baud == -1)
1485                baud = tty_termios_baud_rate(old_termios);
1486        /* Not put the baud rate into the termios data */
1487        tty_encode_baud_rate(tty, baud, baud);
1488}
1489
1490/*****************************************************************************
1491 *      Driver level functions:                                              *
1492 *****************************************************************************/
1493
1494static void MoxaPortFlushData(struct moxa_port *port, int mode)
1495{
1496        void __iomem *ofsAddr;
1497        if (mode < 0 || mode > 2)
1498                return;
1499        ofsAddr = port->tableAddr;
1500        moxafunc(ofsAddr, FC_FlushQueue, mode);
1501        if (mode != 1) {
1502                port->lowChkFlag = 0;
1503                moxa_low_water_check(ofsAddr);
1504        }
1505}
1506
1507/*
1508 *    Moxa Port Number Description:
1509 *
1510 *      MOXA serial driver supports up to 4 MOXA-C218/C320 boards. And,
1511 *      the port number using in MOXA driver functions will be 0 to 31 for
1512 *      first MOXA board, 32 to 63 for second, 64 to 95 for third and 96
1513 *      to 127 for fourth. For example, if you setup three MOXA boards,
1514 *      first board is C218, second board is C320-16 and third board is
1515 *      C320-32. The port number of first board (C218 - 8 ports) is from
1516 *      0 to 7. The port number of second board (C320 - 16 ports) is form
1517 *      32 to 47. The port number of third board (C320 - 32 ports) is from
1518 *      64 to 95. And those port numbers form 8 to 31, 48 to 63 and 96 to
1519 *      127 will be invalid.
1520 *
1521 *
1522 *      Moxa Functions Description:
1523 *
1524 *      Function 1:     Driver initialization routine, this routine must be
1525 *                      called when initialized driver.
1526 *      Syntax:
1527 *      void MoxaDriverInit();
1528 *
1529 *
1530 *      Function 2:     Moxa driver private IOCTL command processing.
1531 *      Syntax:
1532 *      int  MoxaDriverIoctl(unsigned int cmd, unsigned long arg, int port);
1533 *
1534 *           unsigned int cmd   : IOCTL command
1535 *           unsigned long arg  : IOCTL argument
1536 *           int port           : port number (0 - 127)
1537 *
1538 *           return:    0  (OK)
1539 *                      -EINVAL
1540 *                      -ENOIOCTLCMD
1541 *
1542 *
1543 *      Function 6:     Enable this port to start Tx/Rx data.
1544 *      Syntax:
1545 *      void MoxaPortEnable(int port);
1546 *           int port           : port number (0 - 127)
1547 *
1548 *
1549 *      Function 7:     Disable this port
1550 *      Syntax:
1551 *      void MoxaPortDisable(int port);
1552 *           int port           : port number (0 - 127)
1553 *
1554 *
1555 *      Function 10:    Setting baud rate of this port.
1556 *      Syntax:
1557 *      speed_t MoxaPortSetBaud(int port, speed_t baud);
1558 *           int port           : port number (0 - 127)
1559 *           long baud          : baud rate (50 - 115200)
1560 *
1561 *           return:    0       : this port is invalid or baud < 50
1562 *                      50 - 115200 : the real baud rate set to the port, if
1563 *                                    the argument baud is large than maximun
1564 *                                    available baud rate, the real setting
1565 *                                    baud rate will be the maximun baud rate.
1566 *
1567 *
1568 *      Function 12:    Configure the port.
1569 *      Syntax:
1570 *      int  MoxaPortSetTermio(int port, struct ktermios *termio, speed_t baud);
1571 *           int port           : port number (0 - 127)
1572 *           struct ktermios * termio : termio structure pointer
1573 *           speed_t baud       : baud rate
1574 *
1575 *           return:    -1      : this port is invalid or termio == NULL
1576 *                      0       : setting O.K.
1577 *
1578 *
1579 *      Function 13:    Get the DTR/RTS state of this port.
1580 *      Syntax:
1581 *      int  MoxaPortGetLineOut(int port, int *dtrState, int *rtsState);
1582 *           int port           : port number (0 - 127)
1583 *           int * dtrState     : pointer to INT to receive the current DTR
1584 *                                state. (if NULL, this function will not
1585 *                                write to this address)
1586 *           int * rtsState     : pointer to INT to receive the current RTS
1587 *                                state. (if NULL, this function will not
1588 *                                write to this address)
1589 *
1590 *           return:    -1      : this port is invalid
1591 *                      0       : O.K.
1592 *
1593 *
1594 *      Function 14:    Setting the DTR/RTS output state of this port.
1595 *      Syntax:
1596 *      void MoxaPortLineCtrl(int port, int dtrState, int rtsState);
1597 *           int port           : port number (0 - 127)
1598 *           int dtrState       : DTR output state (0: off, 1: on)
1599 *           int rtsState       : RTS output state (0: off, 1: on)
1600 *
1601 *
1602 *      Function 15:    Setting the flow control of this port.
1603 *      Syntax:
1604 *      void MoxaPortFlowCtrl(int port, int rtsFlow, int ctsFlow, int rxFlow,
1605 *                            int txFlow,int xany);
1606 *           int port           : port number (0 - 127)
1607 *           int rtsFlow        : H/W RTS flow control (0: no, 1: yes)
1608 *           int ctsFlow        : H/W CTS flow control (0: no, 1: yes)
1609 *           int rxFlow         : S/W Rx XON/XOFF flow control (0: no, 1: yes)
1610 *           int txFlow         : S/W Tx XON/XOFF flow control (0: no, 1: yes)
1611 *           int xany           : S/W XANY flow control (0: no, 1: yes)
1612 *
1613 *
1614 *      Function 16:    Get ths line status of this port
1615 *      Syntax:
1616 *      int  MoxaPortLineStatus(int port);
1617 *           int port           : port number (0 - 127)
1618 *
1619 *           return:    Bit 0 - CTS state (0: off, 1: on)
1620 *                      Bit 1 - DSR state (0: off, 1: on)
1621 *                      Bit 2 - DCD state (0: off, 1: on)
1622 *
1623 *
1624 *      Function 19:    Flush the Rx/Tx buffer data of this port.
1625 *      Syntax:
1626 *      void MoxaPortFlushData(int port, int mode);
1627 *           int port           : port number (0 - 127)
1628 *           int mode    
1629 *                      0       : flush the Rx buffer 
1630 *                      1       : flush the Tx buffer 
1631 *                      2       : flush the Rx and Tx buffer 
1632 *
1633 *
1634 *      Function 20:    Write data.
1635 *      Syntax:
1636 *      int  MoxaPortWriteData(int port, unsigned char * buffer, int length);
1637 *           int port           : port number (0 - 127)
1638 *           unsigned char * buffer     : pointer to write data buffer.
1639 *           int length         : write data length
1640 *
1641 *           return:    0 - length      : real write data length
1642 *
1643 *
1644 *      Function 21:    Read data.
1645 *      Syntax:
1646 *      int  MoxaPortReadData(int port, struct tty_struct *tty);
1647 *           int port           : port number (0 - 127)
1648 *           struct tty_struct *tty : tty for data
1649 *
1650 *           return:    0 - length      : real read data length
1651 *
1652 *
1653 *      Function 24:    Get the Tx buffer current queued data bytes
1654 *      Syntax:
1655 *      int  MoxaPortTxQueue(int port);
1656 *           int port           : port number (0 - 127)
1657 *
1658 *           return:    ..      : Tx buffer current queued data bytes
1659 *
1660 *
1661 *      Function 25:    Get the Tx buffer current free space
1662 *      Syntax:
1663 *      int  MoxaPortTxFree(int port);
1664 *           int port           : port number (0 - 127)
1665 *
1666 *           return:    ..      : Tx buffer current free space
1667 *
1668 *
1669 *      Function 26:    Get the Rx buffer current queued data bytes
1670 *      Syntax:
1671 *      int  MoxaPortRxQueue(int port);
1672 *           int port           : port number (0 - 127)
1673 *
1674 *           return:    ..      : Rx buffer current queued data bytes
1675 *
1676 *
1677 *      Function 28:    Disable port data transmission.
1678 *      Syntax:
1679 *      void MoxaPortTxDisable(int port);
1680 *           int port           : port number (0 - 127)
1681 *
1682 *
1683 *      Function 29:    Enable port data transmission.
1684 *      Syntax:
1685 *      void MoxaPortTxEnable(int port);
1686 *           int port           : port number (0 - 127)
1687 *
1688 *
1689 *      Function 31:    Get the received BREAK signal count and reset it.
1690 *      Syntax:
1691 *      int  MoxaPortResetBrkCnt(int port);
1692 *           int port           : port number (0 - 127)
1693 *
1694 *           return:    0 - ..  : BREAK signal count
1695 *
1696 *
1697 */
1698
1699static void MoxaPortEnable(struct moxa_port *port)
1700{
1701        void __iomem *ofsAddr;
1702        u16 lowwater = 512;
1703
1704        ofsAddr = port->tableAddr;
1705        writew(lowwater, ofsAddr + Low_water);
1706        if (MOXA_IS_320(port->board))
1707                moxafunc(ofsAddr, FC_SetBreakIrq, 0);
1708        else
1709                writew(readw(ofsAddr + HostStat) | WakeupBreak,
1710                                ofsAddr + HostStat);
1711
1712        moxafunc(ofsAddr, FC_SetLineIrq, Magic_code);
1713        moxafunc(ofsAddr, FC_FlushQueue, 2);
1714
1715        moxafunc(ofsAddr, FC_EnableCH, Magic_code);
1716        MoxaPortLineStatus(port);
1717}
1718
1719static void MoxaPortDisable(struct moxa_port *port)
1720{
1721        void __iomem *ofsAddr = port->tableAddr;
1722
1723        moxafunc(ofsAddr, FC_SetFlowCtl, 0);    /* disable flow control */
1724        moxafunc(ofsAddr, FC_ClrLineIrq, Magic_code);
1725        writew(0, ofsAddr + HostStat);
1726        moxafunc(ofsAddr, FC_DisableCH, Magic_code);
1727}
1728
1729static speed_t MoxaPortSetBaud(struct moxa_port *port, speed_t baud)
1730{
1731        void __iomem *ofsAddr = port->tableAddr;
1732        unsigned int clock, val;
1733        speed_t max;
1734
1735        max = MOXA_IS_320(port->board) ? 460800 : 921600;
1736        if (baud < 50)
1737                return 0;
1738        if (baud > max)
1739                baud = max;
1740        clock = 921600;
1741        val = clock / baud;
1742        moxafunc(ofsAddr, FC_SetBaud, val);
1743        baud = clock / val;
1744        return baud;
1745}
1746
1747static int MoxaPortSetTermio(struct moxa_port *port, struct ktermios *termio,
1748                speed_t baud)
1749{
1750        void __iomem *ofsAddr;
1751        tcflag_t mode = 0;
1752
1753        ofsAddr = port->tableAddr;
1754
1755        mode = termio->c_cflag & CSIZE;
1756        if (mode == CS5)
1757                mode = MX_CS5;
1758        else if (mode == CS6)
1759                mode = MX_CS6;
1760        else if (mode == CS7)
1761                mode = MX_CS7;
1762        else if (mode == CS8)
1763                mode = MX_CS8;
1764
1765        if (termio->c_cflag & CSTOPB) {
1766                if (mode == MX_CS5)
1767                        mode |= MX_STOP15;
1768                else
1769                        mode |= MX_STOP2;
1770        } else
1771                mode |= MX_STOP1;
1772
1773        if (termio->c_cflag & PARENB) {
1774                if (termio->c_cflag & PARODD) {
1775                        if (termio->c_cflag & CMSPAR)
1776                                mode |= MX_PARMARK;
1777                        else
1778                                mode |= MX_PARODD;
1779                } else {
1780                        if (termio->c_cflag & CMSPAR)
1781                                mode |= MX_PARSPACE;
1782                        else
1783                                mode |= MX_PAREVEN;
1784                }
1785        } else
1786                mode |= MX_PARNONE;
1787
1788        moxafunc(ofsAddr, FC_SetDataMode, (u16)mode);
1789
1790        if (MOXA_IS_320(port->board) && baud >= 921600)
1791                return -1;
1792
1793        baud = MoxaPortSetBaud(port, baud);
1794
1795        if (termio->c_iflag & (IXON | IXOFF | IXANY)) {
1796                spin_lock_irq(&moxafunc_lock);
1797                writeb(termio->c_cc[VSTART], ofsAddr + FuncArg);
1798                writeb(termio->c_cc[VSTOP], ofsAddr + FuncArg1);
1799                writeb(FC_SetXonXoff, ofsAddr + FuncCode);
1800                moxa_wait_finish(ofsAddr);
1801                spin_unlock_irq(&moxafunc_lock);
1802
1803        }
1804        return baud;
1805}
1806
1807static int MoxaPortGetLineOut(struct moxa_port *port, int *dtrState,
1808                int *rtsState)
1809{
1810        if (dtrState)
1811                *dtrState = !!(port->lineCtrl & DTR_ON);
1812        if (rtsState)
1813                *rtsState = !!(port->lineCtrl & RTS_ON);
1814
1815        return 0;
1816}
1817
1818static void MoxaPortLineCtrl(struct moxa_port *port, int dtr, int rts)
1819{
1820        u8 mode = 0;
1821
1822        if (dtr)
1823                mode |= DTR_ON;
1824        if (rts)
1825                mode |= RTS_ON;
1826        port->lineCtrl = mode;
1827        moxafunc(port->tableAddr, FC_LineControl, mode);
1828}
1829
1830static void MoxaPortFlowCtrl(struct moxa_port *port, int rts, int cts,
1831                int txflow, int rxflow, int txany)
1832{
1833        int mode = 0;
1834
1835        if (rts)
1836                mode |= RTS_FlowCtl;
1837        if (cts)
1838                mode |= CTS_FlowCtl;
1839        if (txflow)
1840                mode |= Tx_FlowCtl;
1841        if (rxflow)
1842                mode |= Rx_FlowCtl;
1843        if (txany)
1844                mode |= IXM_IXANY;
1845        moxafunc(port->tableAddr, FC_SetFlowCtl, mode);
1846}
1847
1848static int MoxaPortLineStatus(struct moxa_port *port)
1849{
1850        void __iomem *ofsAddr;
1851        int val;
1852
1853        ofsAddr = port->tableAddr;
1854        if (MOXA_IS_320(port->board))
1855                val = moxafuncret(ofsAddr, FC_LineStatus, 0);
1856        else
1857                val = readw(ofsAddr + FlagStat) >> 4;
1858        val &= 0x0B;
1859        if (val & 8)
1860                val |= 4;
1861        moxa_new_dcdstate(port, val & 8);
1862        val &= 7;
1863        return val;
1864}
1865
1866static int MoxaPortWriteData(struct tty_struct *tty,
1867                const unsigned char *buffer, int len)
1868{
1869        struct moxa_port *port = tty->driver_data;
1870        void __iomem *baseAddr, *ofsAddr, *ofs;
1871        unsigned int c, total;
1872        u16 head, tail, tx_mask, spage, epage;
1873        u16 pageno, pageofs, bufhead;
1874
1875        ofsAddr = port->tableAddr;
1876        baseAddr = port->board->basemem;
1877        tx_mask = readw(ofsAddr + TX_mask);
1878        spage = readw(ofsAddr + Page_txb);
1879        epage = readw(ofsAddr + EndPage_txb);
1880        tail = readw(ofsAddr + TXwptr);
1881        head = readw(ofsAddr + TXrptr);
1882        c = (head > tail) ? (head - tail - 1) : (head - tail + tx_mask);
1883        if (c > len)
1884                c = len;
1885        moxaLog.txcnt[port->port.tty->index] += c;
1886        total = c;
1887        if (spage == epage) {
1888                bufhead = readw(ofsAddr + Ofs_txb);
1889                writew(spage, baseAddr + Control_reg);
1890                while (c > 0) {
1891                        if (head > tail)
1892                                len = head - tail - 1;
1893                        else
1894                                len = tx_mask + 1 - tail;
1895                        len = (c > len) ? len : c;
1896                        ofs = baseAddr + DynPage_addr + bufhead + tail;
1897                        memcpy_toio(ofs, buffer, len);
1898                        buffer += len;
1899                        tail = (tail + len) & tx_mask;
1900                        c -= len;
1901                }
1902        } else {
1903                pageno = spage + (tail >> 13);
1904                pageofs = tail & Page_mask;
1905                while (c > 0) {
1906                        len = Page_size - pageofs;
1907                        if (len > c)
1908                                len = c;
1909                        writeb(pageno, baseAddr + Control_reg);
1910                        ofs = baseAddr + DynPage_addr + pageofs;
1911                        memcpy_toio(ofs, buffer, len);
1912                        buffer += len;
1913                        if (++pageno == epage)
1914                                pageno = spage;
1915                        pageofs = 0;
1916                        c -= len;
1917                }
1918                tail = (tail + total) & tx_mask;
1919        }
1920        writew(tail, ofsAddr + TXwptr);
1921        writeb(1, ofsAddr + CD180TXirq);        /* start to send */
1922        return total;
1923}
1924
1925static int MoxaPortReadData(struct moxa_port *port)
1926{
1927        struct tty_struct *tty = port->port.tty;
1928        unsigned char *dst;
1929        void __iomem *baseAddr, *ofsAddr, *ofs;
1930        unsigned int count, len, total;
1931        u16 tail, rx_mask, spage, epage;
1932        u16 pageno, pageofs, bufhead, head;
1933
1934        ofsAddr = port->tableAddr;
1935        baseAddr = port->board->basemem;
1936        head = readw(ofsAddr + RXrptr);
1937        tail = readw(ofsAddr + RXwptr);
1938        rx_mask = readw(ofsAddr + RX_mask);
1939        spage = readw(ofsAddr + Page_rxb);
1940        epage = readw(ofsAddr + EndPage_rxb);
1941        count = (tail >= head) ? (tail - head) : (tail - head + rx_mask + 1);
1942        if (count == 0)
1943                return 0;
1944
1945        total = count;
1946        moxaLog.rxcnt[tty->index] += total;
1947        if (spage == epage) {
1948                bufhead = readw(ofsAddr + Ofs_rxb);
1949                writew(spage, baseAddr + Control_reg);
1950                while (count > 0) {
1951                        ofs = baseAddr + DynPage_addr + bufhead + head;
1952                        len = (tail >= head) ? (tail - head) :
1953                                        (rx_mask + 1 - head);
1954                        len = tty_prepare_flip_string(&port->port, &dst,
1955                                        min(len, count));
1956                        memcpy_fromio(dst, ofs, len);
1957                        head = (head + len) & rx_mask;
1958                        count -= len;
1959                }
1960        } else {
1961                pageno = spage + (head >> 13);
1962                pageofs = head & Page_mask;
1963                while (count > 0) {
1964                        writew(pageno, baseAddr + Control_reg);
1965                        ofs = baseAddr + DynPage_addr + pageofs;
1966                        len = tty_prepare_flip_string(&port->port, &dst,
1967                                        min(Page_size - pageofs, count));
1968                        memcpy_fromio(dst, ofs, len);
1969
1970                        count -= len;
1971                        pageofs = (pageofs + len) & Page_mask;
1972                        if (pageofs == 0 && ++pageno == epage)
1973                                pageno = spage;
1974                }
1975                head = (head + total) & rx_mask;
1976        }
1977        writew(head, ofsAddr + RXrptr);
1978        if (readb(ofsAddr + FlagStat) & Xoff_state) {
1979                moxaLowWaterChk = 1;
1980                port->lowChkFlag = 1;
1981        }
1982        return total;
1983}
1984
1985
1986static int MoxaPortTxQueue(struct moxa_port *port)
1987{
1988        void __iomem *ofsAddr = port->tableAddr;
1989        u16 rptr, wptr, mask;
1990
1991        rptr = readw(ofsAddr + TXrptr);
1992        wptr = readw(ofsAddr + TXwptr);
1993        mask = readw(ofsAddr + TX_mask);
1994        return (wptr - rptr) & mask;
1995}
1996
1997static int MoxaPortTxFree(struct moxa_port *port)
1998{
1999        void __iomem *ofsAddr = port->tableAddr;
2000        u16 rptr, wptr, mask;
2001
2002        rptr = readw(ofsAddr + TXrptr);
2003        wptr = readw(ofsAddr + TXwptr);
2004        mask = readw(ofsAddr + TX_mask);
2005        return mask - ((wptr - rptr) & mask);
2006}
2007
2008static int MoxaPortRxQueue(struct moxa_port *port)
2009{
2010        void __iomem *ofsAddr = port->tableAddr;
2011        u16 rptr, wptr, mask;
2012
2013        rptr = readw(ofsAddr + RXrptr);
2014        wptr = readw(ofsAddr + RXwptr);
2015        mask = readw(ofsAddr + RX_mask);
2016        return (wptr - rptr) & mask;
2017}
2018
2019static void MoxaPortTxDisable(struct moxa_port *port)
2020{
2021        moxafunc(port->tableAddr, FC_SetXoffState, Magic_code);
2022}
2023
2024static void MoxaPortTxEnable(struct moxa_port *port)
2025{
2026        moxafunc(port->tableAddr, FC_SetXonState, Magic_code);
2027}
2028
2029static int moxa_get_serial_info(struct tty_struct *tty,
2030                struct serial_struct *ss)
2031{
2032        struct moxa_port *info = tty->driver_data;
2033
2034        if (tty->index == MAX_PORTS)
2035                return -EINVAL;
2036        if (!info)
2037                return -ENODEV;
2038        mutex_lock(&info->port.mutex);
2039        ss->type = info->type,
2040        ss->line = info->port.tty->index,
2041        ss->flags = info->port.flags,
2042        ss->baud_base = 921600,
2043        ss->close_delay = info->port.close_delay;
2044        mutex_unlock(&info->port.mutex);
2045        return 0;
2046}
2047
2048
2049static int moxa_set_serial_info(struct tty_struct *tty,
2050                struct serial_struct *ss)
2051{
2052        struct moxa_port *info = tty->driver_data;
2053
2054        if (tty->index == MAX_PORTS)
2055                return -EINVAL;
2056        if (!info)
2057                return -ENODEV;
2058
2059        if (ss->irq != 0 || ss->port != 0 ||
2060                        ss->custom_divisor != 0 ||
2061                        ss->baud_base != 921600)
2062                return -EPERM;
2063
2064        mutex_lock(&info->port.mutex);
2065        if (!capable(CAP_SYS_ADMIN)) {
2066                if (((ss->flags & ~ASYNC_USR_MASK) !=
2067                     (info->port.flags & ~ASYNC_USR_MASK))) {
2068                        mutex_unlock(&info->port.mutex);
2069                        return -EPERM;
2070                }
2071        }
2072        info->port.close_delay = ss->close_delay * HZ / 100;
2073
2074        MoxaSetFifo(info, ss->type == PORT_16550A);
2075
2076        info->type = ss->type;
2077        mutex_unlock(&info->port.mutex);
2078        return 0;
2079}
2080
2081
2082
2083/*****************************************************************************
2084 *      Static local functions:                                              *
2085 *****************************************************************************/
2086
2087static void MoxaSetFifo(struct moxa_port *port, int enable)
2088{
2089        void __iomem *ofsAddr = port->tableAddr;
2090
2091        if (!enable) {
2092                moxafunc(ofsAddr, FC_SetRxFIFOTrig, 0);
2093                moxafunc(ofsAddr, FC_SetTxFIFOCnt, 1);
2094        } else {
2095                moxafunc(ofsAddr, FC_SetRxFIFOTrig, 3);
2096                moxafunc(ofsAddr, FC_SetTxFIFOCnt, 16);
2097        }
2098}
2099