/* SPDX-License-Identifier: GPL-2.0-only */
/*
 * Header file for dma buffer sharing framework.
 *
 * Copyright(C) 2011 Linaro Limited. All rights reserved.
 * Author: Sumit Semwal <sumit.semwal@ti.com>
 *
 * Many thanks to linaro-mm-sig list, and specially
 * Arnd Bergmann <arnd@arndb.de>, Rob Clark <rob@ti.com> and
 * Daniel Vetter <daniel@ffwll.ch> for their support in creation and
 * refining of this idea.
 */
#ifndef __DMA_BUF_H__
#define __DMA_BUF_H__

#include <linux/file.h>
#include <linux/err.h>
#include <linux/scatterlist.h>
#include <linux/list.h>
#include <linux/dma-mapping.h>
#include <linux/fs.h>
#include <linux/dma-fence.h>
#include <linux/wait.h>

struct device;
struct dma_buf;
struct dma_buf_attachment;

/**
 * struct dma_buf_ops - operations possible on struct dma_buf
 * @vmap: [optional] creates a virtual mapping for the buffer into kernel
 *        address space. Same restrictions as for vmap and friends apply.
 * @vunmap: [optional] unmaps a vmap from the buffer
 */
struct dma_buf_ops {
        /**
          * @cache_sgt_mapping:
          *
          * If true the framework will cache the first mapping made for each
          * attachment. This avoids creating mappings for attachments multiple
          * times.
          */
        bool cache_sgt_mapping;

        /**
         * @attach:
         *
         * This is called from dma_buf_attach() to make sure that a given
         * &dma_buf_attachment.dev can access the provided &dma_buf. Exporters
         * which support buffer objects in special locations like VRAM or
         * device-specific carveout areas should check whether the buffer could
         * be move to system memory (or directly accessed by the provided
         * device), and otherwise need to fail the attach operation.
         *
         * The exporter should also in general check whether the current
         * allocation fullfills the DMA constraints of the new device. If this
         * is not the case, and the allocation cannot be moved, it should also
         * fail the attach operation.
         *
         * Any exporter-private housekeeping data can be stored in the
         * &dma_buf_attachment.priv pointer.
         *
         * This callback is optional.
         *
         * Returns:
         *
         * 0 on success, negative error code on failure. It might return -EBUSY
         * to signal that backing storage is already allocated and incompatible
         * with the requirements of requesting device.
         */
        int (*attach)(struct dma_buf *, struct dma_buf_attachment *);

        /**
         * @detach:
         *
         * This is called by dma_buf_detach() to release a &dma_buf_attachment.
         * Provided so that exporters can clean up any housekeeping for an
         * &dma_buf_attachment.
         *
         * This callback is optional.
         */
        void (*detach)(struct dma_buf *, struct dma_buf_attachment *);

        /**
         * @map_dma_buf:
         *
         * This is called by dma_buf_map_attachment() and is used to map a
         * shared &dma_buf into device address space, and it is mandatory. It
         * can only be called if @attach has been called successfully. This
         * essentially pins the DMA buffer into place, and it cannot be moved
         * any more
         *
         * This call may sleep, e.g. when the backing storage first needs to be
         * allocated, or moved to a location suitable for all currently attached
         * devices.
         *
         * Note that any specific buffer attributes required for this function
         * should get added to device_dma_parameters accessible via
         * &device.dma_params from the &dma_buf_attachment. The @attach callback
         * should also check these constraints.
         *
         * If this is being called for the first time, the exporter can now
         * choose to scan through the list of attachments for this buffer,
         * collate the requirements of the attached devices, and choose an
         * appropriate backing storage for the buffer.
         *
         * Based on enum dma_data_direction, it might be possible to have
         * multiple users accessing at the same time (for reading, maybe), or
         * any other kind of sharing that the exporter might wish to make
         * available to buffer-users.
         *
         * Returns:
         *
         * A &sg_table scatter list of or the backing storage of the DMA buffer,
         * already mapped into the device address space of the &device attached
         * with the provided &dma_buf_attachment.
         *
         * On failure, returns a negative error value wrapped into a pointer.
         * May also return -EINTR when a signal was received while being
         * blocked.
         */
        struct sg_table * (*map_dma_buf)(struct dma_buf_attachment *,
                                         enum dma_data_direction);
        /**
         * @unmap_dma_buf:
         *
         * This is called by dma_buf_unmap_attachment() and should unmap and
         * release the &sg_table allocated in @map_dma_buf, and it is mandatory.
         * It should also unpin the backing storage if this is the last mapping
         * of the DMA buffer, it the exporter supports backing storage
         * migration.
         */
        void (*unmap_dma_buf)(struct dma_buf_attachment *,
                              struct sg_table *,
                              enum dma_data_direction);

        /* TODO: Add try_map_dma_buf version, to return immed with -EBUSY
         * if the call would block.
         */

        /**
         * @release:
         *
         * Called after the last dma_buf_put to release the &dma_buf, and
         * mandatory.
         */
        void (*release)(struct dma_buf *);

        /**
         * @begin_cpu_access:
         *
         * This is called from dma_buf_begin_cpu_access() and allows the
         * exporter to ensure that the memory is actually available for cpu
         * access - the exporter might need to allocate or swap-in and pin the
         * backing storage. The exporter also needs to ensure that cpu access is
         * coherent for the access direction. The direction can be used by the
         * exporter to optimize the cache flushing, i.e. access with a different
         * direction (read instead of write) might return stale or even bogus
         * data (e.g. when the exporter needs to copy the data to temporary
         * storage).
         *
         * This callback is optional.
         *
         * FIXME: This is both called through the DMA_BUF_IOCTL_SYNC command
         * from userspace (where storage shouldn't be pinned to avoid handing
         * de-factor mlock rights to userspace) and for the kernel-internal
         * users of the various kmap interfaces, where the backing storage must
         * be pinned to guarantee that the atomic kmap calls can succeed. Since
         * there's no in-kernel users of the kmap interfaces yet this isn't a
         * real problem.
         *
         * Returns:
         *
         * 0 on success or a negative error code on failure. This can for
         * example fail when the backing storage can't be allocated. Can also
         * return -ERESTARTSYS or -EINTR when the call has been interrupted and
         * needs to be restarted.
         */
        int (*begin_cpu_access)(struct dma_buf *, enum dma_data_direction);

        /**
         * @end_cpu_access:
         *
         * This is called from dma_buf_end_cpu_access() when the importer is
         * done accessing the CPU. The exporter can use this to flush caches and
         * unpin any resources pinned in @begin_cpu_access.
         * The result of any dma_buf kmap calls after end_cpu_access is
         * undefined.
         *
         * This callback is optional.
         *
         * Returns:
         *
         * 0 on success or a negative error code on failure. Can return
         * -ERESTARTSYS or -EINTR when the call has been interrupted and needs
         * to be restarted.
         */
        int (*end_cpu_access)(struct dma_buf *, enum dma_data_direction);

        /**
         * @mmap:
         *
         * This callback is used by the dma_buf_mmap() function
         *
         * Note that the mapping needs to be incoherent, userspace is expected
         * to braket CPU access using the DMA_BUF_IOCTL_SYNC interface.
         *
         * Because dma-buf buffers have invariant size over their lifetime, the
         * dma-buf core checks whether a vma is too large and rejects such
         * mappings. The exporter hence does not need to duplicate this check.
         * Drivers do not need to check this themselves.
         *
         * If an exporter needs to manually flush caches and hence needs to fake
         * coherency for mmap support, it needs to be able to zap all the ptes
         * pointing at the backing storage. Now linux mm needs a struct
         * address_space associated with the struct file stored in vma->vm_file
         * to do that with the function unmap_mapping_range. But the dma_buf
         * framework only backs every dma_buf fd with the anon_file struct file,
         * i.e. all dma_bufs share the same file.
         *
         * Hence exporters need to setup their own file (and address_space)
         * association by setting vma->vm_file and adjusting vma->vm_pgoff in
         * the dma_buf mmap callback. In the specific case of a gem driver the
         * exporter could use the shmem file already provided by gem (and set
         * vm_pgoff = 0). Exporters can then zap ptes by unmapping the
         * corresponding range of the struct address_space associated with their
         * own file.
         *
         * This callback is optional.
         *
         * Returns:
         *
         * 0 on success or a negative error code on failure.
         */
        int (*mmap)(struct dma_buf *, struct vm_area_struct *vma);

        /**
         * @map:
         *
         * Maps a page from the buffer into kernel address space. The page is
         * specified by offset into the buffer in PAGE_SIZE units.
         *
         * This callback is optional.
         *
         * Returns:
         *
         * Virtual address pointer where requested page can be accessed. NULL
         * on error or when this function is unimplemented by the exporter.
         */
        void *(*map)(struct dma_buf *, unsigned long);

        /**
         * @unmap:
         *
         * Unmaps a page from the buffer. Page offset and address pointer should
         * be the same as the one passed to and returned by matching call to map.
         *
         * This callback is optional.
         */
        void (*unmap)(struct dma_buf *, unsigned long, void *);

        void *(*vmap)(struct dma_buf *);
        void (*vunmap)(struct dma_buf *, void *vaddr);
};

/**
 * struct dma_buf - shared buffer object
 * @size: size of the buffer
 * @file: file pointer used for sharing buffers across, and for refcounting.
 * @attachments: list of dma_buf_attachment that denotes all devices attached.
 * @ops: dma_buf_ops associated with this buffer object.
 * @lock: used internally to serialize list manipulation, attach/detach and
 *        vmap/unmap, and accesses to name
 * @vmapping_counter: used internally to refcnt the vmaps
 * @vmap_ptr: the current vmap ptr if vmapping_counter > 0
 * @exp_name: name of the exporter; useful for debugging.
 * @name: userspace-provided name; useful for accounting and debugging.
 * @owner: pointer to exporter module; used for refcounting when exporter is a
 *         kernel module.
 * @list_node: node for dma_buf accounting and debugging.
 * @priv: exporter specific private data for this buffer object.
 * @resv: reservation object linked to this dma-buf
 * @poll: for userspace poll support
 * @cb_excl: for userspace poll support
 * @cb_shared: for userspace poll support
 *
 * This represents a shared buffer, created by calling dma_buf_export(). The
 * userspace representation is a normal file descriptor, which can be created by
 * calling dma_buf_fd().
 *
 * Shared dma buffers are reference counted using dma_buf_put() and
 * get_dma_buf().
 *
 * Device DMA access is handled by the separate &struct dma_buf_attachment.
 */
struct dma_buf {
        size_t size;
        struct file *file;
        struct list_head attachments;
        const struct dma_buf_ops *ops;
        struct mutex lock;
        unsigned vmapping_counter;
        void *vmap_ptr;
        const char *exp_name;
        const char *name;
        struct module *owner;
        struct list_head list_node;
        void *priv;
        struct reservation_object *resv;

        /* poll support */
        wait_queue_head_t poll;

        struct dma_buf_poll_cb_t {
                struct dma_fence_cb cb;
                wait_queue_head_t *poll;

                __poll_t active;
        } cb_excl, cb_shared;
};

/**
 * struct dma_buf_attachment - holds device-buffer attachment data
 * @dmabuf: buffer for this attachment.
 * @dev: device attached to the buffer.
 * @node: list of dma_buf_attachment.
 * @sgt: cached mapping.
 * @dir: direction of cached mapping.
 * @priv: exporter specific attachment data.
 *
 * This structure holds the attachment information between the dma_buf buffer
 * and its user device(s). The list contains one attachment struct per device
 * attached to the buffer.
 *
 * An attachment is created by calling dma_buf_attach(), and released again by
 * calling dma_buf_detach(). The DMA mapping itself needed to initiate a
 * transfer is created by dma_buf_map_attachment() and freed again by calling
 * dma_buf_unmap_attachment().
 */
struct dma_buf_attachment {
        struct dma_buf *dmabuf;
        struct device *dev;
        struct list_head node;
        struct sg_table *sgt;
        enum dma_data_direction dir;
        void *priv;
};

/**
 * struct dma_buf_export_info - holds information needed to export a dma_buf
 * @exp_name:   name of the exporter - useful for debugging.
 * @owner:      pointer to exporter module - used for refcounting kernel module
 * @ops:        Attach allocator-defined dma buf ops to the new buffer
 * @size:       Size of the buffer
 * @flags:      mode flags for the file
 * @resv:       reservation-object, NULL to allocate default one
 * @priv:       Attach private data of allocator to this buffer
 *
 * This structure holds the information required to export the buffer. Used
 * with dma_buf_export() only.
 */
struct dma_buf_export_info {
        const char *exp_name;
        struct module *owner;
        const struct dma_buf_ops *ops;
        size_t size;
        int flags;
        struct reservation_object *resv;
        void *priv;
};

/**
 * DEFINE_DMA_BUF_EXPORT_INFO - helper macro for exporters
 * @name: export-info name
 *
 * DEFINE_DMA_BUF_EXPORT_INFO macro defines the &struct dma_buf_export_info,
 * zeroes it out and pre-populates exp_name in it.
 */
#define DEFINE_DMA_BUF_EXPORT_INFO(name)        \
        struct dma_buf_export_info name = { .exp_name = KBUILD_MODNAME, \
                                         .owner = THIS_MODULE }

/**
 * get_dma_buf - convenience wrapper for get_file.
 * @dmabuf:     [in]    pointer to dma_buf
 *
 * Increments the reference count on the dma-buf, needed in case of drivers
 * that either need to create additional references to the dmabuf on the
 * kernel side.  For example, an exporter that needs to keep a dmabuf ptr
 * so that subsequent exports don't create a new dmabuf.
 */
static inline void get_dma_buf(struct dma_buf *dmabuf)
{
        get_file(dmabuf->file);
}

struct dma_buf_attachment *dma_buf_attach(struct dma_buf *dmabuf,
                                                        struct device *dev);
void dma_buf_detach(struct dma_buf *dmabuf,
                                struct dma_buf_attachment *dmabuf_attach);

struct dma_buf *dma_buf_export(const struct dma_buf_export_info *exp_info);

int dma_buf_fd(struct dma_buf *dmabuf, int flags);
struct dma_buf *dma_buf_get(int fd);
void dma_buf_put(struct dma_buf *dmabuf);

struct sg_table *dma_buf_map_attachment(struct dma_buf_attachment *,
                                        enum dma_data_direction);
void dma_buf_unmap_attachment(struct dma_buf_attachment *, struct sg_table *,
                                enum dma_data_direction);
int dma_buf_begin_cpu_access(struct dma_buf *dma_buf,
                             enum dma_data_direction dir);
int dma_buf_end_cpu_access(struct dma_buf *dma_buf,
                           enum dma_data_direction dir);
void *dma_buf_kmap(struct dma_buf *, unsigned long);
void dma_buf_kunmap(struct dma_buf *, unsigned long, void *);

int dma_buf_mmap(struct dma_buf *, struct vm_area_struct *,
                 unsigned long);
void *dma_buf_vmap(struct dma_buf *);
void dma_buf_vunmap(struct dma_buf *, void *vaddr);
#endif /* __DMA_BUF_H__ */