1/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ 2/* 3 * This file define a set of standard wireless extensions 4 * 5 * Version : 22 16.3.07 6 * 7 * Authors : Jean Tourrilhes - HPL - <jt@hpl.hp.com> 8 * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved. 9 */ 10 11#ifndef _UAPI_LINUX_WIRELESS_H 12#define _UAPI_LINUX_WIRELESS_H 13 14/************************** DOCUMENTATION **************************/ 15/* 16 * Initial APIs (1996 -> onward) : 17 * ----------------------------- 18 * Basically, the wireless extensions are for now a set of standard ioctl 19 * call + /proc/net/wireless 20 * 21 * The entry /proc/net/wireless give statistics and information on the 22 * driver. 23 * This is better than having each driver having its entry because 24 * its centralised and we may remove the driver module safely. 25 * 26 * Ioctl are used to configure the driver and issue commands. This is 27 * better than command line options of insmod because we may want to 28 * change dynamically (while the driver is running) some parameters. 29 * 30 * The ioctl mechanimsm are copied from standard devices ioctl. 31 * We have the list of command plus a structure descibing the 32 * data exchanged... 33 * Note that to add these ioctl, I was obliged to modify : 34 * # net/core/dev.c (two place + add include) 35 * # net/ipv4/af_inet.c (one place + add include) 36 * 37 * /proc/net/wireless is a copy of /proc/net/dev. 38 * We have a structure for data passed from the driver to /proc/net/wireless 39 * Too add this, I've modified : 40 * # net/core/dev.c (two other places) 41 * # include/linux/netdevice.h (one place) 42 * # include/linux/proc_fs.h (one place) 43 * 44 * New driver API (2002 -> onward) : 45 * ------------------------------- 46 * This file is only concerned with the user space API and common definitions. 47 * The new driver API is defined and documented in : 48 * # include/net/iw_handler.h 49 * 50 * Note as well that /proc/net/wireless implementation has now moved in : 51 * # net/core/wireless.c 52 * 53 * Wireless Events (2002 -> onward) : 54 * -------------------------------- 55 * Events are defined at the end of this file, and implemented in : 56 * # net/core/wireless.c 57 * 58 * Other comments : 59 * -------------- 60 * Do not add here things that are redundant with other mechanisms 61 * (drivers init, ifconfig, /proc/net/dev, ...) and with are not 62 * wireless specific. 63 * 64 * These wireless extensions are not magic : each driver has to provide 65 * support for them... 66 * 67 * IMPORTANT NOTE : As everything in the kernel, this is very much a 68 * work in progress. Contact me if you have ideas of improvements... 69 */ 70 71/***************************** INCLUDES *****************************/ 72 73#include <linux/types.h> /* for __u* and __s* typedefs */ 74#include <linux/socket.h> /* for "struct sockaddr" et al */ 75#include <linux/if.h> /* for IFNAMSIZ and co... */ 76 77/***************************** VERSION *****************************/ 78/* 79 * This constant is used to know the availability of the wireless 80 * extensions and to know which version of wireless extensions it is 81 * (there is some stuff that will be added in the future...) 82 * I just plan to increment with each new version. 83 */ 84#define WIRELESS_EXT 22 85 86/* 87 * Changes : 88 * 89 * V2 to V3 90 * -------- 91 * Alan Cox start some incompatibles changes. I've integrated a bit more. 92 * - Encryption renamed to Encode to avoid US regulation problems 93 * - Frequency changed from float to struct to avoid problems on old 386 94 * 95 * V3 to V4 96 * -------- 97 * - Add sensitivity 98 * 99 * V4 to V5 100 * -------- 101 * - Missing encoding definitions in range 102 * - Access points stuff 103 * 104 * V5 to V6 105 * -------- 106 * - 802.11 support (ESSID ioctls) 107 * 108 * V6 to V7 109 * -------- 110 * - define IW_ESSID_MAX_SIZE and IW_MAX_AP 111 * 112 * V7 to V8 113 * -------- 114 * - Changed my e-mail address 115 * - More 802.11 support (nickname, rate, rts, frag) 116 * - List index in frequencies 117 * 118 * V8 to V9 119 * -------- 120 * - Support for 'mode of operation' (ad-hoc, managed...) 121 * - Support for unicast and multicast power saving 122 * - Change encoding to support larger tokens (>64 bits) 123 * - Updated iw_params (disable, flags) and use it for NWID 124 * - Extracted iw_point from iwreq for clarity 125 * 126 * V9 to V10 127 * --------- 128 * - Add PM capability to range structure 129 * - Add PM modifier : MAX/MIN/RELATIVE 130 * - Add encoding option : IW_ENCODE_NOKEY 131 * - Add TxPower ioctls (work like TxRate) 132 * 133 * V10 to V11 134 * ---------- 135 * - Add WE version in range (help backward/forward compatibility) 136 * - Add retry ioctls (work like PM) 137 * 138 * V11 to V12 139 * ---------- 140 * - Add SIOCSIWSTATS to get /proc/net/wireless programatically 141 * - Add DEV PRIVATE IOCTL to avoid collisions in SIOCDEVPRIVATE space 142 * - Add new statistics (frag, retry, beacon) 143 * - Add average quality (for user space calibration) 144 * 145 * V12 to V13 146 * ---------- 147 * - Document creation of new driver API. 148 * - Extract union iwreq_data from struct iwreq (for new driver API). 149 * - Rename SIOCSIWNAME as SIOCSIWCOMMIT 150 * 151 * V13 to V14 152 * ---------- 153 * - Wireless Events support : define struct iw_event 154 * - Define additional specific event numbers 155 * - Add "addr" and "param" fields in union iwreq_data 156 * - AP scanning stuff (SIOCSIWSCAN and friends) 157 * 158 * V14 to V15 159 * ---------- 160 * - Add IW_PRIV_TYPE_ADDR for struct sockaddr private arg 161 * - Make struct iw_freq signed (both m & e), add explicit padding 162 * - Add IWEVCUSTOM for driver specific event/scanning token 163 * - Add IW_MAX_GET_SPY for driver returning a lot of addresses 164 * - Add IW_TXPOW_RANGE for range of Tx Powers 165 * - Add IWEVREGISTERED & IWEVEXPIRED events for Access Points 166 * - Add IW_MODE_MONITOR for passive monitor 167 * 168 * V15 to V16 169 * ---------- 170 * - Increase the number of bitrates in iw_range to 32 (for 802.11g) 171 * - Increase the number of frequencies in iw_range to 32 (for 802.11b+a) 172 * - Reshuffle struct iw_range for increases, add filler 173 * - Increase IW_MAX_AP to 64 for driver returning a lot of addresses 174 * - Remove IW_MAX_GET_SPY because conflict with enhanced spy support 175 * - Add SIOCSIWTHRSPY/SIOCGIWTHRSPY and "struct iw_thrspy" 176 * - Add IW_ENCODE_TEMP and iw_range->encoding_login_index 177 * 178 * V16 to V17 179 * ---------- 180 * - Add flags to frequency -> auto/fixed 181 * - Document (struct iw_quality *)->updated, add new flags (INVALID) 182 * - Wireless Event capability in struct iw_range 183 * - Add support for relative TxPower (yick !) 184 * 185 * V17 to V18 (From Jouni Malinen <j@w1.fi>) 186 * ---------- 187 * - Add support for WPA/WPA2 188 * - Add extended encoding configuration (SIOCSIWENCODEEXT and 189 * SIOCGIWENCODEEXT) 190 * - Add SIOCSIWGENIE/SIOCGIWGENIE 191 * - Add SIOCSIWMLME 192 * - Add SIOCSIWPMKSA 193 * - Add struct iw_range bit field for supported encoding capabilities 194 * - Add optional scan request parameters for SIOCSIWSCAN 195 * - Add SIOCSIWAUTH/SIOCGIWAUTH for setting authentication and WPA 196 * related parameters (extensible up to 4096 parameter values) 197 * - Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE, 198 * IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND 199 * 200 * V18 to V19 201 * ---------- 202 * - Remove (struct iw_point *)->pointer from events and streams 203 * - Remove header includes to help user space 204 * - Increase IW_ENCODING_TOKEN_MAX from 32 to 64 205 * - Add IW_QUAL_ALL_UPDATED and IW_QUAL_ALL_INVALID macros 206 * - Add explicit flag to tell stats are in dBm : IW_QUAL_DBM 207 * - Add IW_IOCTL_IDX() and IW_EVENT_IDX() macros 208 * 209 * V19 to V20 210 * ---------- 211 * - RtNetlink requests support (SET/GET) 212 * 213 * V20 to V21 214 * ---------- 215 * - Remove (struct net_device *)->get_wireless_stats() 216 * - Change length in ESSID and NICK to strlen() instead of strlen()+1 217 * - Add IW_RETRY_SHORT/IW_RETRY_LONG retry modifiers 218 * - Power/Retry relative values no longer * 100000 219 * - Add explicit flag to tell stats are in 802.11k RCPI : IW_QUAL_RCPI 220 * 221 * V21 to V22 222 * ---------- 223 * - Prevent leaking of kernel space in stream on 64 bits. 224 */ 225 226/**************************** CONSTANTS ****************************/ 227 228/* -------------------------- IOCTL LIST -------------------------- */ 229 230/* Wireless Identification */ 231#define SIOCSIWCOMMIT 0x8B00 /* Commit pending changes to driver */ 232#define SIOCGIWNAME 0x8B01 /* get name == wireless protocol */ 233/* SIOCGIWNAME is used to verify the presence of Wireless Extensions. 234 * Common values : "IEEE 802.11-DS", "IEEE 802.11-FH", "IEEE 802.11b"... 235 * Don't put the name of your driver there, it's useless. */ 236 237/* Basic operations */ 238#define SIOCSIWNWID 0x8B02 /* set network id (pre-802.11) */ 239#define SIOCGIWNWID 0x8B03 /* get network id (the cell) */ 240#define SIOCSIWFREQ 0x8B04 /* set channel/frequency (Hz) */ 241#define SIOCGIWFREQ 0x8B05 /* get channel/frequency (Hz) */ 242#define SIOCSIWMODE 0x8B06 /* set operation mode */ 243#define SIOCGIWMODE 0x8B07 /* get operation mode */ 244#define SIOCSIWSENS 0x8B08 /* set sensitivity (dBm) */ 245#define SIOCGIWSENS 0x8B09 /* get sensitivity (dBm) */ 246 247/* Informative stuff */ 248#define SIOCSIWRANGE 0x8B0A /* Unused */ 249#define SIOCGIWRANGE 0x8B0B /* Get range of parameters */ 250#define SIOCSIWPRIV 0x8B0C /* Unused */ 251#define SIOCGIWPRIV 0x8B0D /* get private ioctl interface info */ 252#define SIOCSIWSTATS 0x8B0E /* Unused */ 253#define SIOCGIWSTATS 0x8B0F /* Get /proc/net/wireless stats */ 254/* SIOCGIWSTATS is strictly used between user space and the kernel, and 255 * is never passed to the driver (i.e. the driver will never see it). */ 256 257/* Spy support (statistics per MAC address - used for Mobile IP support) */ 258#define SIOCSIWSPY 0x8B10 /* set spy addresses */ 259#define SIOCGIWSPY 0x8B11 /* get spy info (quality of link) */ 260#define SIOCSIWTHRSPY 0x8B12 /* set spy threshold (spy event) */ 261#define SIOCGIWTHRSPY 0x8B13 /* get spy threshold */ 262 263/* Access Point manipulation */ 264#define SIOCSIWAP 0x8B14 /* set access point MAC addresses */ 265#define SIOCGIWAP 0x8B15 /* get access point MAC addresses */ 266#define SIOCGIWAPLIST 0x8B17 /* Deprecated in favor of scanning */ 267#define SIOCSIWSCAN 0x8B18 /* trigger scanning (list cells) */ 268#define SIOCGIWSCAN 0x8B19 /* get scanning results */ 269 270/* 802.11 specific support */ 271#define SIOCSIWESSID 0x8B1A /* set ESSID (network name) */ 272#define SIOCGIWESSID 0x8B1B /* get ESSID */ 273#define SIOCSIWNICKN 0x8B1C /* set node name/nickname */ 274#define SIOCGIWNICKN 0x8B1D /* get node name/nickname */ 275/* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit 276 * within the 'iwreq' structure, so we need to use the 'data' member to 277 * point to a string in user space, like it is done for RANGE... */ 278 279/* Other parameters useful in 802.11 and some other devices */ 280#define SIOCSIWRATE 0x8B20 /* set default bit rate (bps) */ 281#define SIOCGIWRATE 0x8B21 /* get default bit rate (bps) */ 282#define SIOCSIWRTS 0x8B22 /* set RTS/CTS threshold (bytes) */ 283#define SIOCGIWRTS 0x8B23 /* get RTS/CTS threshold (bytes) */ 284#define SIOCSIWFRAG 0x8B24 /* set fragmentation thr (bytes) */ 285#define SIOCGIWFRAG 0x8B25 /* get fragmentation thr (bytes) */ 286#define SIOCSIWTXPOW 0x8B26 /* set transmit power (dBm) */ 287#define SIOCGIWTXPOW 0x8B27 /* get transmit power (dBm) */ 288#define SIOCSIWRETRY 0x8B28 /* set retry limits and lifetime */ 289#define SIOCGIWRETRY 0x8B29 /* get retry limits and lifetime */ 290 291/* Encoding stuff (scrambling, hardware security, WEP...) */ 292#define SIOCSIWENCODE 0x8B2A /* set encoding token & mode */ 293#define SIOCGIWENCODE 0x8B2B /* get encoding token & mode */ 294/* Power saving stuff (power management, unicast and multicast) */ 295#define SIOCSIWPOWER 0x8B2C /* set Power Management settings */ 296#define SIOCGIWPOWER 0x8B2D /* get Power Management settings */ 297 298/* WPA : Generic IEEE 802.11 informatiom element (e.g., for WPA/RSN/WMM). 299 * This ioctl uses struct iw_point and data buffer that includes IE id and len 300 * fields. More than one IE may be included in the request. Setting the generic 301 * IE to empty buffer (len=0) removes the generic IE from the driver. Drivers 302 * are allowed to generate their own WPA/RSN IEs, but in these cases, drivers 303 * are required to report the used IE as a wireless event, e.g., when 304 * associating with an AP. */ 305#define SIOCSIWGENIE 0x8B30 /* set generic IE */ 306#define SIOCGIWGENIE 0x8B31 /* get generic IE */ 307 308/* WPA : IEEE 802.11 MLME requests */ 309#define SIOCSIWMLME 0x8B16 /* request MLME operation; uses 310 * struct iw_mlme */ 311/* WPA : Authentication mode parameters */ 312#define SIOCSIWAUTH 0x8B32 /* set authentication mode params */ 313#define SIOCGIWAUTH 0x8B33 /* get authentication mode params */ 314 315/* WPA : Extended version of encoding configuration */ 316#define SIOCSIWENCODEEXT 0x8B34 /* set encoding token & mode */ 317#define SIOCGIWENCODEEXT 0x8B35 /* get encoding token & mode */ 318 319/* WPA2 : PMKSA cache management */ 320#define SIOCSIWPMKSA 0x8B36 /* PMKSA cache operation */ 321 322/* -------------------- DEV PRIVATE IOCTL LIST -------------------- */ 323 324/* These 32 ioctl are wireless device private, for 16 commands. 325 * Each driver is free to use them for whatever purpose it chooses, 326 * however the driver *must* export the description of those ioctls 327 * with SIOCGIWPRIV and *must* use arguments as defined below. 328 * If you don't follow those rules, DaveM is going to hate you (reason : 329 * it make mixed 32/64bit operation impossible). 330 */ 331#define SIOCIWFIRSTPRIV 0x8BE0 332#define SIOCIWLASTPRIV 0x8BFF 333/* Previously, we were using SIOCDEVPRIVATE, but we now have our 334 * separate range because of collisions with other tools such as 335 * 'mii-tool'. 336 * We now have 32 commands, so a bit more space ;-). 337 * Also, all 'even' commands are only usable by root and don't return the 338 * content of ifr/iwr to user (but you are not obliged to use the set/get 339 * convention, just use every other two command). More details in iwpriv.c. 340 * And I repeat : you are not forced to use them with iwpriv, but you 341 * must be compliant with it. 342 */ 343 344/* ------------------------- IOCTL STUFF ------------------------- */ 345 346/* The first and the last (range) */ 347#define SIOCIWFIRST 0x8B00 348#define SIOCIWLAST SIOCIWLASTPRIV /* 0x8BFF */ 349#define IW_IOCTL_IDX(cmd) ((cmd) - SIOCIWFIRST) 350#define IW_HANDLER(id, func) \ 351 [IW_IOCTL_IDX(id)] = func 352 353/* Odd : get (world access), even : set (root access) */ 354#define IW_IS_SET(cmd) (!((cmd) & 0x1)) 355#define IW_IS_GET(cmd) ((cmd) & 0x1) 356 357/* ----------------------- WIRELESS EVENTS ----------------------- */ 358/* Those are *NOT* ioctls, do not issue request on them !!! */ 359/* Most events use the same identifier as ioctl requests */ 360 361#define IWEVTXDROP 0x8C00 /* Packet dropped to excessive retry */ 362#define IWEVQUAL 0x8C01 /* Quality part of statistics (scan) */ 363#define IWEVCUSTOM 0x8C02 /* Driver specific ascii string */ 364#define IWEVREGISTERED 0x8C03 /* Discovered a new node (AP mode) */ 365#define IWEVEXPIRED 0x8C04 /* Expired a node (AP mode) */ 366#define IWEVGENIE 0x8C05 /* Generic IE (WPA, RSN, WMM, ..) 367 * (scan results); This includes id and 368 * length fields. One IWEVGENIE may 369 * contain more than one IE. Scan 370 * results may contain one or more 371 * IWEVGENIE events. */ 372#define IWEVMICHAELMICFAILURE 0x8C06 /* Michael MIC failure 373 * (struct iw_michaelmicfailure) 374 */ 375#define IWEVASSOCREQIE 0x8C07 /* IEs used in (Re)Association Request. 376 * The data includes id and length 377 * fields and may contain more than one 378 * IE. This event is required in 379 * Managed mode if the driver 380 * generates its own WPA/RSN IE. This 381 * should be sent just before 382 * IWEVREGISTERED event for the 383 * association. */ 384#define IWEVASSOCRESPIE 0x8C08 /* IEs used in (Re)Association 385 * Response. The data includes id and 386 * length fields and may contain more 387 * than one IE. This may be sent 388 * between IWEVASSOCREQIE and 389 * IWEVREGISTERED events for the 390 * association. */ 391#define IWEVPMKIDCAND 0x8C09 /* PMKID candidate for RSN 392 * pre-authentication 393 * (struct iw_pmkid_cand) */ 394 395#define IWEVFIRST 0x8C00 396#define IW_EVENT_IDX(cmd) ((cmd) - IWEVFIRST) 397 398/* ------------------------- PRIVATE INFO ------------------------- */ 399/* 400 * The following is used with SIOCGIWPRIV. It allow a driver to define 401 * the interface (name, type of data) for its private ioctl. 402 * Privates ioctl are SIOCIWFIRSTPRIV -> SIOCIWLASTPRIV 403 */ 404 405#define IW_PRIV_TYPE_MASK 0x7000 /* Type of arguments */ 406#define IW_PRIV_TYPE_NONE 0x0000 407#define IW_PRIV_TYPE_BYTE 0x1000 /* Char as number */ 408#define IW_PRIV_TYPE_CHAR 0x2000 /* Char as character */ 409#define IW_PRIV_TYPE_INT 0x4000 /* 32 bits int */ 410#define IW_PRIV_TYPE_FLOAT 0x5000 /* struct iw_freq */ 411#define IW_PRIV_TYPE_ADDR 0x6000 /* struct sockaddr */ 412 413#define IW_PRIV_SIZE_FIXED 0x0800 /* Variable or fixed number of args */ 414 415#define IW_PRIV_SIZE_MASK 0x07FF /* Max number of those args */ 416 417/* 418 * Note : if the number of args is fixed and the size < 16 octets, 419 * instead of passing a pointer we will put args in the iwreq struct... 420 */ 421 422/* ----------------------- OTHER CONSTANTS ----------------------- */ 423 424/* Maximum frequencies in the range struct */ 425#define IW_MAX_FREQUENCIES 32 426/* Note : if you have something like 80 frequencies, 427 * don't increase this constant and don't fill the frequency list. 428 * The user will be able to set by channel anyway... */ 429 430/* Maximum bit rates in the range struct */ 431#define IW_MAX_BITRATES 32 432 433/* Maximum tx powers in the range struct */ 434#define IW_MAX_TXPOWER 8 435/* Note : if you more than 8 TXPowers, just set the max and min or 436 * a few of them in the struct iw_range. */ 437 438/* Maximum of address that you may set with SPY */ 439#define IW_MAX_SPY 8 440 441/* Maximum of address that you may get in the 442 list of access points in range */ 443#define IW_MAX_AP 64 444 445/* Maximum size of the ESSID and NICKN strings */ 446#define IW_ESSID_MAX_SIZE 32 447 448/* Modes of operation */ 449#define IW_MODE_AUTO 0 /* Let the driver decides */ 450#define IW_MODE_ADHOC 1 /* Single cell network */ 451#define IW_MODE_INFRA 2 /* Multi cell network, roaming, ... */ 452#define IW_MODE_MASTER 3 /* Synchronisation master or Access Point */ 453#define IW_MODE_REPEAT 4 /* Wireless Repeater (forwarder) */ 454#define IW_MODE_SECOND 5 /* Secondary master/repeater (backup) */ 455#define IW_MODE_MONITOR 6 /* Passive monitor (listen only) */ 456#define IW_MODE_MESH 7 /* Mesh (IEEE 802.11s) network */ 457 458/* Statistics flags (bitmask in updated) */ 459#define IW_QUAL_QUAL_UPDATED 0x01 /* Value was updated since last read */ 460#define IW_QUAL_LEVEL_UPDATED 0x02 461#define IW_QUAL_NOISE_UPDATED 0x04 462#define IW_QUAL_ALL_UPDATED 0x07 463#define IW_QUAL_DBM 0x08 /* Level + Noise are dBm */ 464#define IW_QUAL_QUAL_INVALID 0x10 /* Driver doesn't provide value */ 465#define IW_QUAL_LEVEL_INVALID 0x20 466#define IW_QUAL_NOISE_INVALID 0x40 467#define IW_QUAL_RCPI 0x80 /* Level + Noise are 802.11k RCPI */ 468#define IW_QUAL_ALL_INVALID 0x70 469 470/* Frequency flags */ 471#define IW_FREQ_AUTO 0x00 /* Let the driver decides */ 472#define IW_FREQ_FIXED 0x01 /* Force a specific value */ 473 474/* Maximum number of size of encoding token available 475 * they are listed in the range structure */ 476#define IW_MAX_ENCODING_SIZES 8 477 478/* Maximum size of the encoding token in bytes */ 479#define IW_ENCODING_TOKEN_MAX 64 /* 512 bits (for now) */ 480 481/* Flags for encoding (along with the token) */ 482#define IW_ENCODE_INDEX 0x00FF /* Token index (if needed) */ 483#define IW_ENCODE_FLAGS 0xFF00 /* Flags defined below */ 484#define IW_ENCODE_MODE 0xF000 /* Modes defined below */ 485#define IW_ENCODE_DISABLED 0x8000 /* Encoding disabled */ 486#define IW_ENCODE_ENABLED 0x0000 /* Encoding enabled */ 487#define IW_ENCODE_RESTRICTED 0x4000 /* Refuse non-encoded packets */ 488#define IW_ENCODE_OPEN 0x2000 /* Accept non-encoded packets */ 489#define IW_ENCODE_NOKEY 0x0800 /* Key is write only, so not present */ 490#define IW_ENCODE_TEMP 0x0400 /* Temporary key */ 491 492/* Power management flags available (along with the value, if any) */ 493#define IW_POWER_ON 0x0000 /* No details... */ 494#define IW_POWER_TYPE 0xF000 /* Type of parameter */ 495#define IW_POWER_PERIOD 0x1000 /* Value is a period/duration of */ 496#define IW_POWER_TIMEOUT 0x2000 /* Value is a timeout (to go asleep) */ 497#define IW_POWER_MODE 0x0F00 /* Power Management mode */ 498#define IW_POWER_UNICAST_R 0x0100 /* Receive only unicast messages */ 499#define IW_POWER_MULTICAST_R 0x0200 /* Receive only multicast messages */ 500#define IW_POWER_ALL_R 0x0300 /* Receive all messages though PM */ 501#define IW_POWER_FORCE_S 0x0400 /* Force PM procedure for sending unicast */ 502#define IW_POWER_REPEATER 0x0800 /* Repeat broadcast messages in PM period */ 503#define IW_POWER_MODIFIER 0x000F /* Modify a parameter */ 504#define IW_POWER_MIN 0x0001 /* Value is a minimum */ 505#define IW_POWER_MAX 0x0002 /* Value is a maximum */ 506#define IW_POWER_RELATIVE 0x0004 /* Value is not in seconds/ms/us */ 507 508/* Transmit Power flags available */ 509#define IW_TXPOW_TYPE 0x00FF /* Type of value */ 510#define IW_TXPOW_DBM 0x0000 /* Value is in dBm */ 511#define IW_TXPOW_MWATT 0x0001 /* Value is in mW */ 512#define IW_TXPOW_RELATIVE 0x0002 /* Value is in arbitrary units */ 513#define IW_TXPOW_RANGE 0x1000 /* Range of value between min/max */ 514 515/* Retry limits and lifetime flags available */ 516#define IW_RETRY_ON 0x0000 /* No details... */ 517#define IW_RETRY_TYPE 0xF000 /* Type of parameter */ 518#define IW_RETRY_LIMIT 0x1000 /* Maximum number of retries*/ 519#define IW_RETRY_LIFETIME 0x2000 /* Maximum duration of retries in us */ 520#define IW_RETRY_MODIFIER 0x00FF /* Modify a parameter */ 521#define IW_RETRY_MIN 0x0001 /* Value is a minimum */ 522#define IW_RETRY_MAX 0x0002 /* Value is a maximum */ 523#define IW_RETRY_RELATIVE 0x0004 /* Value is not in seconds/ms/us */ 524#define IW_RETRY_SHORT 0x0010 /* Value is for short packets */ 525#define IW_RETRY_LONG 0x0020 /* Value is for long packets */ 526 527/* Scanning request flags */ 528#define IW_SCAN_DEFAULT 0x0000 /* Default scan of the driver */ 529#define IW_SCAN_ALL_ESSID 0x0001 /* Scan all ESSIDs */ 530#define IW_SCAN_THIS_ESSID 0x0002 /* Scan only this ESSID */ 531#define IW_SCAN_ALL_FREQ 0x0004 /* Scan all Frequencies */ 532#define IW_SCAN_THIS_FREQ 0x0008 /* Scan only this Frequency */ 533#define IW_SCAN_ALL_MODE 0x0010 /* Scan all Modes */ 534#define IW_SCAN_THIS_MODE 0x0020 /* Scan only this Mode */ 535#define IW_SCAN_ALL_RATE 0x0040 /* Scan all Bit-Rates */ 536#define IW_SCAN_THIS_RATE 0x0080 /* Scan only this Bit-Rate */ 537/* struct iw_scan_req scan_type */ 538#define IW_SCAN_TYPE_ACTIVE 0 539#define IW_SCAN_TYPE_PASSIVE 1 540/* Maximum size of returned data */ 541#define IW_SCAN_MAX_DATA 4096 /* In bytes */ 542 543/* Scan capability flags - in (struct iw_range *)->scan_capa */ 544#define IW_SCAN_CAPA_NONE 0x00 545#define IW_SCAN_CAPA_ESSID 0x01 546#define IW_SCAN_CAPA_BSSID 0x02 547#define IW_SCAN_CAPA_CHANNEL 0x04 548#define IW_SCAN_CAPA_MODE 0x08 549#define IW_SCAN_CAPA_RATE 0x10 550#define IW_SCAN_CAPA_TYPE 0x20 551#define IW_SCAN_CAPA_TIME 0x40 552 553/* Max number of char in custom event - use multiple of them if needed */ 554#define IW_CUSTOM_MAX 256 /* In bytes */ 555 556/* Generic information element */ 557#define IW_GENERIC_IE_MAX 1024 558 559/* MLME requests (SIOCSIWMLME / struct iw_mlme) */ 560#define IW_MLME_DEAUTH 0 561#define IW_MLME_DISASSOC 1 562#define IW_MLME_AUTH 2 563#define IW_MLME_ASSOC 3 564 565/* SIOCSIWAUTH/SIOCGIWAUTH struct iw_param flags */ 566#define IW_AUTH_INDEX 0x0FFF 567#define IW_AUTH_FLAGS 0xF000 568/* SIOCSIWAUTH/SIOCGIWAUTH parameters (0 .. 4095) 569 * (IW_AUTH_INDEX mask in struct iw_param flags; this is the index of the 570 * parameter that is being set/get to; value will be read/written to 571 * struct iw_param value field) */ 572#define IW_AUTH_WPA_VERSION 0 573#define IW_AUTH_CIPHER_PAIRWISE 1 574#define IW_AUTH_CIPHER_GROUP 2 575#define IW_AUTH_KEY_MGMT 3 576#define IW_AUTH_TKIP_COUNTERMEASURES 4 577#define IW_AUTH_DROP_UNENCRYPTED 5 578#define IW_AUTH_80211_AUTH_ALG 6 579#define IW_AUTH_WPA_ENABLED 7 580#define IW_AUTH_RX_UNENCRYPTED_EAPOL 8 581#define IW_AUTH_ROAMING_CONTROL 9 582#define IW_AUTH_PRIVACY_INVOKED 10 583#define IW_AUTH_CIPHER_GROUP_MGMT 11 584#define IW_AUTH_MFP 12 585 586/* IW_AUTH_WPA_VERSION values (bit field) */ 587#define IW_AUTH_WPA_VERSION_DISABLED 0x00000001 588#define IW_AUTH_WPA_VERSION_WPA 0x00000002 589#define IW_AUTH_WPA_VERSION_WPA2 0x00000004 590 591/* IW_AUTH_PAIRWISE_CIPHER, IW_AUTH_GROUP_CIPHER, and IW_AUTH_CIPHER_GROUP_MGMT 592 * values (bit field) */ 593#define IW_AUTH_CIPHER_NONE 0x00000001 594#define IW_AUTH_CIPHER_WEP40 0x00000002 595#define IW_AUTH_CIPHER_TKIP 0x00000004 596#define IW_AUTH_CIPHER_CCMP 0x00000008 597#define IW_AUTH_CIPHER_WEP104 0x00000010 598#define IW_AUTH_CIPHER_AES_CMAC 0x00000020 599 600/* IW_AUTH_KEY_MGMT values (bit field) */ 601#define IW_AUTH_KEY_MGMT_802_1X 1 602#define IW_AUTH_KEY_MGMT_PSK 2 603 604/* IW_AUTH_80211_AUTH_ALG values (bit field) */ 605#define IW_AUTH_ALG_OPEN_SYSTEM 0x00000001 606#define IW_AUTH_ALG_SHARED_KEY 0x00000002 607#define IW_AUTH_ALG_LEAP 0x00000004 608 609/* IW_AUTH_ROAMING_CONTROL values */ 610#define IW_AUTH_ROAMING_ENABLE 0 /* driver/firmware based roaming */ 611#define IW_AUTH_ROAMING_DISABLE 1 /* user space program used for roaming 612 * control */ 613 614/* IW_AUTH_MFP (management frame protection) values */ 615#define IW_AUTH_MFP_DISABLED 0 /* MFP disabled */ 616#define IW_AUTH_MFP_OPTIONAL 1 /* MFP optional */ 617#define IW_AUTH_MFP_REQUIRED 2 /* MFP required */ 618 619/* SIOCSIWENCODEEXT definitions */ 620#define IW_ENCODE_SEQ_MAX_SIZE 8 621/* struct iw_encode_ext ->alg */ 622#define IW_ENCODE_ALG_NONE 0 623#define IW_ENCODE_ALG_WEP 1 624#define IW_ENCODE_ALG_TKIP 2 625#define IW_ENCODE_ALG_CCMP 3 626#define IW_ENCODE_ALG_PMK 4 627#define IW_ENCODE_ALG_AES_CMAC 5 628/* struct iw_encode_ext ->ext_flags */ 629#define IW_ENCODE_EXT_TX_SEQ_VALID 0x00000001 630#define IW_ENCODE_EXT_RX_SEQ_VALID 0x00000002 631#define IW_ENCODE_EXT_GROUP_KEY 0x00000004 632#define IW_ENCODE_EXT_SET_TX_KEY 0x00000008 633 634/* IWEVMICHAELMICFAILURE : struct iw_michaelmicfailure ->flags */ 635#define IW_MICFAILURE_KEY_ID 0x00000003 /* Key ID 0..3 */ 636#define IW_MICFAILURE_GROUP 0x00000004 637#define IW_MICFAILURE_PAIRWISE 0x00000008 638#define IW_MICFAILURE_STAKEY 0x00000010 639#define IW_MICFAILURE_COUNT 0x00000060 /* 1 or 2 (0 = count not supported) 640 */ 641 642/* Bit field values for enc_capa in struct iw_range */ 643#define IW_ENC_CAPA_WPA 0x00000001 644#define IW_ENC_CAPA_WPA2 0x00000002 645#define IW_ENC_CAPA_CIPHER_TKIP 0x00000004 646#define IW_ENC_CAPA_CIPHER_CCMP 0x00000008 647#define IW_ENC_CAPA_4WAY_HANDSHAKE 0x00000010 648 649/* Event capability macros - in (struct iw_range *)->event_capa 650 * Because we have more than 32 possible events, we use an array of 651 * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */ 652#define IW_EVENT_CAPA_BASE(cmd) ((cmd >= SIOCIWFIRSTPRIV) ? \ 653 (cmd - SIOCIWFIRSTPRIV + 0x60) : \ 654 (cmd - SIOCIWFIRST)) 655#define IW_EVENT_CAPA_INDEX(cmd) (IW_EVENT_CAPA_BASE(cmd) >> 5) 656#define IW_EVENT_CAPA_MASK(cmd) (1 << (IW_EVENT_CAPA_BASE(cmd) & 0x1F)) 657/* Event capability constants - event autogenerated by the kernel 658 * This list is valid for most 802.11 devices, customise as needed... */ 659#define IW_EVENT_CAPA_K_0 (IW_EVENT_CAPA_MASK(0x8B04) | \ 660 IW_EVENT_CAPA_MASK(0x8B06) | \ 661 IW_EVENT_CAPA_MASK(0x8B1A)) 662#define IW_EVENT_CAPA_K_1 (IW_EVENT_CAPA_MASK(0x8B2A)) 663/* "Easy" macro to set events in iw_range (less efficient) */ 664#define IW_EVENT_CAPA_SET(event_capa, cmd) (event_capa[IW_EVENT_CAPA_INDEX(cmd)] |= IW_EVENT_CAPA_MASK(cmd)) 665#define IW_EVENT_CAPA_SET_KERNEL(event_capa) {event_capa[0] |= IW_EVENT_CAPA_K_0; event_capa[1] |= IW_EVENT_CAPA_K_1; } 666 667 668/****************************** TYPES ******************************/ 669 670/* --------------------------- SUBTYPES --------------------------- */ 671/* 672 * Generic format for most parameters that fit in an int 673 */ 674struct iw_param { 675 __s32 value; /* The value of the parameter itself */ 676 __u8 fixed; /* Hardware should not use auto select */ 677 __u8 disabled; /* Disable the feature */ 678 __u16 flags; /* Various specifc flags (if any) */ 679}; 680 681/* 682 * For all data larger than 16 octets, we need to use a 683 * pointer to memory allocated in user space. 684 */ 685struct iw_point { 686 void __user *pointer; /* Pointer to the data (in user space) */ 687 __u16 length; /* number of fields or size in bytes */ 688 __u16 flags; /* Optional params */ 689}; 690 691 692/* 693 * A frequency 694 * For numbers lower than 10^9, we encode the number in 'm' and 695 * set 'e' to 0 696 * For number greater than 10^9, we divide it by the lowest power 697 * of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')... 698 * The power of 10 is in 'e', the result of the division is in 'm'. 699 */ 700struct iw_freq { 701 __s32 m; /* Mantissa */ 702 __s16 e; /* Exponent */ 703 __u8 i; /* List index (when in range struct) */ 704 __u8 flags; /* Flags (fixed/auto) */ 705}; 706 707/* 708 * Quality of the link 709 */ 710struct iw_quality { 711 __u8 qual; /* link quality (%retries, SNR, 712 %missed beacons or better...) */ 713 __u8 level; /* signal level (dBm) */ 714 __u8 noise; /* noise level (dBm) */ 715 __u8 updated; /* Flags to know if updated */ 716}; 717 718/* 719 * Packet discarded in the wireless adapter due to 720 * "wireless" specific problems... 721 * Note : the list of counter and statistics in net_device_stats 722 * is already pretty exhaustive, and you should use that first. 723 * This is only additional stats... 724 */ 725struct iw_discarded { 726 __u32 nwid; /* Rx : Wrong nwid/essid */ 727 __u32 code; /* Rx : Unable to code/decode (WEP) */ 728 __u32 fragment; /* Rx : Can't perform MAC reassembly */ 729 __u32 retries; /* Tx : Max MAC retries num reached */ 730 __u32 misc; /* Others cases */ 731}; 732 733/* 734 * Packet/Time period missed in the wireless adapter due to 735 * "wireless" specific problems... 736 */ 737struct iw_missed { 738 __u32 beacon; /* Missed beacons/superframe */ 739}; 740 741/* 742 * Quality range (for spy threshold) 743 */ 744struct iw_thrspy { 745 struct sockaddr addr; /* Source address (hw/mac) */ 746 struct iw_quality qual; /* Quality of the link */ 747 struct iw_quality low; /* Low threshold */ 748 struct iw_quality high; /* High threshold */ 749}; 750 751/* 752 * Optional data for scan request 753 * 754 * Note: these optional parameters are controlling parameters for the 755 * scanning behavior, these do not apply to getting scan results 756 * (SIOCGIWSCAN). Drivers are expected to keep a local BSS table and 757 * provide a merged results with all BSSes even if the previous scan 758 * request limited scanning to a subset, e.g., by specifying an SSID. 759 * Especially, scan results are required to include an entry for the 760 * current BSS if the driver is in Managed mode and associated with an AP. 761 */ 762struct iw_scan_req { 763 __u8 scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */ 764 __u8 essid_len; 765 __u8 num_channels; /* num entries in channel_list; 766 * 0 = scan all allowed channels */ 767 __u8 flags; /* reserved as padding; use zero, this may 768 * be used in the future for adding flags 769 * to request different scan behavior */ 770 struct sockaddr bssid; /* ff:ff:ff:ff:ff:ff for broadcast BSSID or 771 * individual address of a specific BSS */ 772 773 /* 774 * Use this ESSID if IW_SCAN_THIS_ESSID flag is used instead of using 775 * the current ESSID. This allows scan requests for specific ESSID 776 * without having to change the current ESSID and potentially breaking 777 * the current association. 778 */ 779 __u8 essid[IW_ESSID_MAX_SIZE]; 780 781 /* 782 * Optional parameters for changing the default scanning behavior. 783 * These are based on the MLME-SCAN.request from IEEE Std 802.11. 784 * TU is 1.024 ms. If these are set to 0, driver is expected to use 785 * reasonable default values. min_channel_time defines the time that 786 * will be used to wait for the first reply on each channel. If no 787 * replies are received, next channel will be scanned after this. If 788 * replies are received, total time waited on the channel is defined by 789 * max_channel_time. 790 */ 791 __u32 min_channel_time; /* in TU */ 792 __u32 max_channel_time; /* in TU */ 793 794 struct iw_freq channel_list[IW_MAX_FREQUENCIES]; 795}; 796 797/* ------------------------- WPA SUPPORT ------------------------- */ 798 799/* 800 * Extended data structure for get/set encoding (this is used with 801 * SIOCSIWENCODEEXT/SIOCGIWENCODEEXT. struct iw_point and IW_ENCODE_* 802 * flags are used in the same way as with SIOCSIWENCODE/SIOCGIWENCODE and 803 * only the data contents changes (key data -> this structure, including 804 * key data). 805 * 806 * If the new key is the first group key, it will be set as the default 807 * TX key. Otherwise, default TX key index is only changed if 808 * IW_ENCODE_EXT_SET_TX_KEY flag is set. 809 * 810 * Key will be changed with SIOCSIWENCODEEXT in all cases except for 811 * special "change TX key index" operation which is indicated by setting 812 * key_len = 0 and ext_flags |= IW_ENCODE_EXT_SET_TX_KEY. 813 * 814 * tx_seq/rx_seq are only used when respective 815 * IW_ENCODE_EXT_{TX,RX}_SEQ_VALID flag is set in ext_flags. Normal 816 * TKIP/CCMP operation is to set RX seq with SIOCSIWENCODEEXT and start 817 * TX seq from zero whenever key is changed. SIOCGIWENCODEEXT is normally 818 * used only by an Authenticator (AP or an IBSS station) to get the 819 * current TX sequence number. Using TX_SEQ_VALID for SIOCSIWENCODEEXT and 820 * RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for 821 * debugging/testing. 822 */ 823struct iw_encode_ext { 824 __u32 ext_flags; /* IW_ENCODE_EXT_* */ 825 __u8 tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ 826 __u8 rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ 827 struct sockaddr addr; /* ff:ff:ff:ff:ff:ff for broadcast/multicast 828 * (group) keys or unicast address for 829 * individual keys */ 830 __u16 alg; /* IW_ENCODE_ALG_* */ 831 __u16 key_len; 832 __u8 key[0]; 833}; 834 835/* SIOCSIWMLME data */ 836struct iw_mlme { 837 __u16 cmd; /* IW_MLME_* */ 838 __u16 reason_code; 839 struct sockaddr addr; 840}; 841 842/* SIOCSIWPMKSA data */ 843#define IW_PMKSA_ADD 1 844#define IW_PMKSA_REMOVE 2 845#define IW_PMKSA_FLUSH 3 846 847#define IW_PMKID_LEN 16 848 849struct iw_pmksa { 850 __u32 cmd; /* IW_PMKSA_* */ 851 struct sockaddr bssid; 852 __u8 pmkid[IW_PMKID_LEN]; 853}; 854 855/* IWEVMICHAELMICFAILURE data */ 856struct iw_michaelmicfailure { 857 __u32 flags; 858 struct sockaddr src_addr; 859 __u8 tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */ 860}; 861 862/* IWEVPMKIDCAND data */ 863#define IW_PMKID_CAND_PREAUTH 0x00000001 /* RNS pre-authentication enabled */ 864struct iw_pmkid_cand { 865 __u32 flags; /* IW_PMKID_CAND_* */ 866 __u32 index; /* the smaller the index, the higher the 867 * priority */ 868 struct sockaddr bssid; 869}; 870 871/* ------------------------ WIRELESS STATS ------------------------ */ 872/* 873 * Wireless statistics (used for /proc/net/wireless) 874 */ 875struct iw_statistics { 876 __u16 status; /* Status 877 * - device dependent for now */ 878 879 struct iw_quality qual; /* Quality of the link 880 * (instant/mean/max) */ 881 struct iw_discarded discard; /* Packet discarded counts */ 882 struct iw_missed miss; /* Packet missed counts */ 883}; 884 885/* ------------------------ IOCTL REQUEST ------------------------ */ 886/* 887 * This structure defines the payload of an ioctl, and is used 888 * below. 889 * 890 * Note that this structure should fit on the memory footprint 891 * of iwreq (which is the same as ifreq), which mean a max size of 892 * 16 octets = 128 bits. Warning, pointers might be 64 bits wide... 893 * You should check this when increasing the structures defined 894 * above in this file... 895 */ 896union iwreq_data { 897 /* Config - generic */ 898 char name[IFNAMSIZ]; 899 /* Name : used to verify the presence of wireless extensions. 900 * Name of the protocol/provider... */ 901 902 struct iw_point essid; /* Extended network name */ 903 struct iw_param nwid; /* network id (or domain - the cell) */ 904 struct iw_freq freq; /* frequency or channel : 905 * 0-1000 = channel 906 * > 1000 = frequency in Hz */ 907 908 struct iw_param sens; /* signal level threshold */ 909 struct iw_param bitrate; /* default bit rate */ 910 struct iw_param txpower; /* default transmit power */ 911 struct iw_param rts; /* RTS threshold threshold */ 912 struct iw_param frag; /* Fragmentation threshold */ 913 __u32 mode; /* Operation mode */ 914 struct iw_param retry; /* Retry limits & lifetime */ 915 916 struct iw_point encoding; /* Encoding stuff : tokens */ 917 struct iw_param power; /* PM duration/timeout */ 918 struct iw_quality qual; /* Quality part of statistics */ 919 920 struct sockaddr ap_addr; /* Access point address */ 921 struct sockaddr addr; /* Destination address (hw/mac) */ 922 923 struct iw_param param; /* Other small parameters */ 924 struct iw_point data; /* Other large parameters */ 925}; 926 927/* 928 * The structure to exchange data for ioctl. 929 * This structure is the same as 'struct ifreq', but (re)defined for 930 * convenience... 931 * Do I need to remind you about structure size (32 octets) ? 932 */ 933struct iwreq { 934 union 935 { 936 char ifrn_name[IFNAMSIZ]; /* if name, e.g. "eth0" */ 937 } ifr_ifrn; 938 939 /* Data part (defined just above) */ 940 union iwreq_data u; 941}; 942 943/* -------------------------- IOCTL DATA -------------------------- */ 944/* 945 * For those ioctl which want to exchange mode data that what could 946 * fit in the above structure... 947 */ 948 949/* 950 * Range of parameters 951 */ 952 953struct iw_range { 954 /* Informative stuff (to choose between different interface) */ 955 __u32 throughput; /* To give an idea... */ 956 /* In theory this value should be the maximum benchmarked 957 * TCP/IP throughput, because with most of these devices the 958 * bit rate is meaningless (overhead an co) to estimate how 959 * fast the connection will go and pick the fastest one. 960 * I suggest people to play with Netperf or any benchmark... 961 */ 962 963 /* NWID (or domain id) */ 964 __u32 min_nwid; /* Minimal NWID we are able to set */ 965 __u32 max_nwid; /* Maximal NWID we are able to set */ 966 967 /* Old Frequency (backward compat - moved lower ) */ 968 __u16 old_num_channels; 969 __u8 old_num_frequency; 970 971 /* Scan capabilities */ 972 __u8 scan_capa; /* IW_SCAN_CAPA_* bit field */ 973 974 /* Wireless event capability bitmasks */ 975 __u32 event_capa[6]; 976 977 /* signal level threshold range */ 978 __s32 sensitivity; 979 980 /* Quality of link & SNR stuff */ 981 /* Quality range (link, level, noise) 982 * If the quality is absolute, it will be in the range [0 ; max_qual], 983 * if the quality is dBm, it will be in the range [max_qual ; 0]. 984 * Don't forget that we use 8 bit arithmetics... */ 985 struct iw_quality max_qual; /* Quality of the link */ 986 /* This should contain the average/typical values of the quality 987 * indicator. This should be the threshold between a "good" and 988 * a "bad" link (example : monitor going from green to orange). 989 * Currently, user space apps like quality monitors don't have any 990 * way to calibrate the measurement. With this, they can split 991 * the range between 0 and max_qual in different quality level 992 * (using a geometric subdivision centered on the average). 993 * I expect that people doing the user space apps will feedback 994 * us on which value we need to put in each driver... */ 995 struct iw_quality avg_qual; /* Quality of the link */ 996 997 /* Rates */ 998 __u8 num_bitrates; /* Number of entries in the list */ 999 __s32 bitrate[IW_MAX_BITRATES]; /* list, in bps */ 1000
1001 /* RTS threshold */ 1002 __s32 min_rts; /* Minimal RTS threshold */ 1003 __s32 max_rts; /* Maximal RTS threshold */ 1004 1005 /* Frag threshold */ 1006 __s32 min_frag; /* Minimal frag threshold */ 1007 __s32 max_frag; /* Maximal frag threshold */ 1008 1009 /* Power Management duration & timeout */ 1010 __s32 min_pmp; /* Minimal PM period */ 1011 __s32 max_pmp; /* Maximal PM period */ 1012 __s32 min_pmt; /* Minimal PM timeout */ 1013 __s32 max_pmt; /* Maximal PM timeout */ 1014 __u16 pmp_flags; /* How to decode max/min PM period */ 1015 __u16 pmt_flags; /* How to decode max/min PM timeout */ 1016 __u16 pm_capa; /* What PM options are supported */ 1017 1018 /* Encoder stuff */ 1019 __u16 encoding_size[IW_MAX_ENCODING_SIZES]; /* Different token sizes */ 1020 __u8 num_encoding_sizes; /* Number of entry in the list */ 1021 __u8 max_encoding_tokens; /* Max number of tokens */ 1022 /* For drivers that need a "login/passwd" form */ 1023 __u8 encoding_login_index; /* token index for login token */ 1024 1025 /* Transmit power */ 1026 __u16 txpower_capa; /* What options are supported */ 1027 __u8 num_txpower; /* Number of entries in the list */ 1028 __s32 txpower[IW_MAX_TXPOWER]; /* list, in bps */ 1029 1030 /* Wireless Extension version info */ 1031 __u8 we_version_compiled; /* Must be WIRELESS_EXT */ 1032 __u8 we_version_source; /* Last update of source */ 1033 1034 /* Retry limits and lifetime */ 1035 __u16 retry_capa; /* What retry options are supported */ 1036 __u16 retry_flags; /* How to decode max/min retry limit */ 1037 __u16 r_time_flags; /* How to decode max/min retry life */ 1038 __s32 min_retry; /* Minimal number of retries */ 1039 __s32 max_retry; /* Maximal number of retries */ 1040 __s32 min_r_time; /* Minimal retry lifetime */ 1041 __s32 max_r_time; /* Maximal retry lifetime */ 1042 1043 /* Frequency */ 1044 __u16 num_channels; /* Number of channels [0; num - 1] */ 1045 __u8 num_frequency; /* Number of entry in the list */ 1046 struct iw_freq freq[IW_MAX_FREQUENCIES]; /* list */ 1047 /* Note : this frequency list doesn't need to fit channel numbers, 1048 * because each entry contain its channel index */ 1049 1050 __u32 enc_capa; /* IW_ENC_CAPA_* bit field */ 1051}; 1052 1053/* 1054 * Private ioctl interface information 1055 */ 1056 1057struct iw_priv_args { 1058 __u32 cmd; /* Number of the ioctl to issue */ 1059 __u16 set_args; /* Type and number of args */ 1060 __u16 get_args; /* Type and number of args */ 1061 char name[IFNAMSIZ]; /* Name of the extension */ 1062}; 1063 1064/* ----------------------- WIRELESS EVENTS ----------------------- */ 1065/* 1066 * Wireless events are carried through the rtnetlink socket to user 1067 * space. They are encapsulated in the IFLA_WIRELESS field of 1068 * a RTM_NEWLINK message. 1069 */ 1070 1071/* 1072 * A Wireless Event. Contains basically the same data as the ioctl... 1073 */ 1074struct iw_event { 1075 __u16 len; /* Real length of this stuff */ 1076 __u16 cmd; /* Wireless IOCTL */ 1077 union iwreq_data u; /* IOCTL fixed payload */ 1078}; 1079 1080/* Size of the Event prefix (including padding and alignement junk) */ 1081#define IW_EV_LCP_LEN (sizeof(struct iw_event) - sizeof(union iwreq_data)) 1082/* Size of the various events */ 1083#define IW_EV_CHAR_LEN (IW_EV_LCP_LEN + IFNAMSIZ) 1084#define IW_EV_UINT_LEN (IW_EV_LCP_LEN + sizeof(__u32)) 1085#define IW_EV_FREQ_LEN (IW_EV_LCP_LEN + sizeof(struct iw_freq)) 1086#define IW_EV_PARAM_LEN (IW_EV_LCP_LEN + sizeof(struct iw_param)) 1087#define IW_EV_ADDR_LEN (IW_EV_LCP_LEN + sizeof(struct sockaddr)) 1088#define IW_EV_QUAL_LEN (IW_EV_LCP_LEN + sizeof(struct iw_quality)) 1089 1090/* iw_point events are special. First, the payload (extra data) come at 1091 * the end of the event, so they are bigger than IW_EV_POINT_LEN. Second, 1092 * we omit the pointer, so start at an offset. */ 1093#define IW_EV_POINT_OFF (((char *) &(((struct iw_point *) NULL)->length)) - \ 1094 (char *) NULL) 1095#define IW_EV_POINT_LEN (IW_EV_LCP_LEN + sizeof(struct iw_point) - \ 1096 IW_EV_POINT_OFF) 1097 1098 1099/* Size of the Event prefix when packed in stream */ 1100#define IW_EV_LCP_PK_LEN (4) 1101/* Size of the various events when packed in stream */ 1102#define IW_EV_CHAR_PK_LEN (IW_EV_LCP_PK_LEN + IFNAMSIZ) 1103#define IW_EV_UINT_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(__u32)) 1104#define IW_EV_FREQ_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_freq)) 1105#define IW_EV_PARAM_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_param)) 1106#define IW_EV_ADDR_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct sockaddr)) 1107#define IW_EV_QUAL_PK_LEN (IW_EV_LCP_PK_LEN + sizeof(struct iw_quality)) 1108#define IW_EV_POINT_PK_LEN (IW_EV_LCP_PK_LEN + 4) 1109 1110#endif /* _UAPI_LINUX_WIRELESS_H */ 1111