linux/sound/soc/codecs/wm8993.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-only
   2/*
   3 * wm8993.c -- WM8993 ALSA SoC audio driver
   4 *
   5 * Copyright 2009-12 Wolfson Microelectronics plc
   6 *
   7 * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
   8 */
   9
  10#include <linux/module.h>
  11#include <linux/moduleparam.h>
  12#include <linux/init.h>
  13#include <linux/delay.h>
  14#include <linux/pm.h>
  15#include <linux/i2c.h>
  16#include <linux/regmap.h>
  17#include <linux/regulator/consumer.h>
  18#include <linux/spi/spi.h>
  19#include <linux/slab.h>
  20#include <sound/core.h>
  21#include <sound/pcm.h>
  22#include <sound/pcm_params.h>
  23#include <sound/tlv.h>
  24#include <sound/soc.h>
  25#include <sound/initval.h>
  26#include <sound/wm8993.h>
  27
  28#include "wm8993.h"
  29#include "wm_hubs.h"
  30
  31#define WM8993_NUM_SUPPLIES 6
  32static const char *wm8993_supply_names[WM8993_NUM_SUPPLIES] = {
  33        "DCVDD",
  34        "DBVDD",
  35        "AVDD1",
  36        "AVDD2",
  37        "CPVDD",
  38        "SPKVDD",
  39};
  40
  41static const struct reg_default wm8993_reg_defaults[] = {
  42        { 1,   0x0000 },     /* R1   - Power Management (1) */
  43        { 2,   0x6000 },     /* R2   - Power Management (2) */
  44        { 3,   0x0000 },     /* R3   - Power Management (3) */
  45        { 4,   0x4050 },     /* R4   - Audio Interface (1) */
  46        { 5,   0x4000 },     /* R5   - Audio Interface (2) */
  47        { 6,   0x01C8 },     /* R6   - Clocking 1 */
  48        { 7,   0x0000 },     /* R7   - Clocking 2 */
  49        { 8,   0x0000 },     /* R8   - Audio Interface (3) */
  50        { 9,   0x0040 },     /* R9   - Audio Interface (4) */
  51        { 10,  0x0004 },     /* R10  - DAC CTRL */
  52        { 11,  0x00C0 },     /* R11  - Left DAC Digital Volume */
  53        { 12,  0x00C0 },     /* R12  - Right DAC Digital Volume */
  54        { 13,  0x0000 },     /* R13  - Digital Side Tone */
  55        { 14,  0x0300 },     /* R14  - ADC CTRL */
  56        { 15,  0x00C0 },     /* R15  - Left ADC Digital Volume */
  57        { 16,  0x00C0 },     /* R16  - Right ADC Digital Volume */
  58        { 18,  0x0000 },     /* R18  - GPIO CTRL 1 */
  59        { 19,  0x0010 },     /* R19  - GPIO1 */
  60        { 20,  0x0000 },     /* R20  - IRQ_DEBOUNCE */
  61        { 21,  0x0000 },     /* R21  - Inputs Clamp */
  62        { 22,  0x8000 },     /* R22  - GPIOCTRL 2 */
  63        { 23,  0x0800 },     /* R23  - GPIO_POL */
  64        { 24,  0x008B },     /* R24  - Left Line Input 1&2 Volume */
  65        { 25,  0x008B },     /* R25  - Left Line Input 3&4 Volume */
  66        { 26,  0x008B },     /* R26  - Right Line Input 1&2 Volume */
  67        { 27,  0x008B },     /* R27  - Right Line Input 3&4 Volume */
  68        { 28,  0x006D },     /* R28  - Left Output Volume */
  69        { 29,  0x006D },     /* R29  - Right Output Volume */
  70        { 30,  0x0066 },     /* R30  - Line Outputs Volume */
  71        { 31,  0x0020 },     /* R31  - HPOUT2 Volume */
  72        { 32,  0x0079 },     /* R32  - Left OPGA Volume */
  73        { 33,  0x0079 },     /* R33  - Right OPGA Volume */
  74        { 34,  0x0003 },     /* R34  - SPKMIXL Attenuation */
  75        { 35,  0x0003 },     /* R35  - SPKMIXR Attenuation */
  76        { 36,  0x0011 },     /* R36  - SPKOUT Mixers */
  77        { 37,  0x0100 },     /* R37  - SPKOUT Boost */
  78        { 38,  0x0079 },     /* R38  - Speaker Volume Left */
  79        { 39,  0x0079 },     /* R39  - Speaker Volume Right */
  80        { 40,  0x0000 },     /* R40  - Input Mixer2 */
  81        { 41,  0x0000 },     /* R41  - Input Mixer3 */
  82        { 42,  0x0000 },     /* R42  - Input Mixer4 */
  83        { 43,  0x0000 },     /* R43  - Input Mixer5 */
  84        { 44,  0x0000 },     /* R44  - Input Mixer6 */
  85        { 45,  0x0000 },     /* R45  - Output Mixer1 */
  86        { 46,  0x0000 },     /* R46  - Output Mixer2 */
  87        { 47,  0x0000 },     /* R47  - Output Mixer3 */
  88        { 48,  0x0000 },     /* R48  - Output Mixer4 */
  89        { 49,  0x0000 },     /* R49  - Output Mixer5 */
  90        { 50,  0x0000 },     /* R50  - Output Mixer6 */
  91        { 51,  0x0000 },     /* R51  - HPOUT2 Mixer */
  92        { 52,  0x0000 },     /* R52  - Line Mixer1 */
  93        { 53,  0x0000 },     /* R53  - Line Mixer2 */
  94        { 54,  0x0000 },     /* R54  - Speaker Mixer */
  95        { 55,  0x0000 },     /* R55  - Additional Control */
  96        { 56,  0x0000 },     /* R56  - AntiPOP1 */
  97        { 57,  0x0000 },     /* R57  - AntiPOP2 */
  98        { 58,  0x0000 },     /* R58  - MICBIAS */
  99        { 60,  0x0000 },     /* R60  - FLL Control 1 */
 100        { 61,  0x0000 },     /* R61  - FLL Control 2 */
 101        { 62,  0x0000 },     /* R62  - FLL Control 3 */
 102        { 63,  0x2EE0 },     /* R63  - FLL Control 4 */
 103        { 64,  0x0002 },     /* R64  - FLL Control 5 */
 104        { 65,  0x2287 },     /* R65  - Clocking 3 */
 105        { 66,  0x025F },     /* R66  - Clocking 4 */
 106        { 67,  0x0000 },     /* R67  - MW Slave Control */
 107        { 69,  0x0002 },     /* R69  - Bus Control 1 */
 108        { 70,  0x0000 },     /* R70  - Write Sequencer 0 */
 109        { 71,  0x0000 },     /* R71  - Write Sequencer 1 */
 110        { 72,  0x0000 },     /* R72  - Write Sequencer 2 */
 111        { 73,  0x0000 },     /* R73  - Write Sequencer 3 */
 112        { 74,  0x0000 },     /* R74  - Write Sequencer 4 */
 113        { 75,  0x0000 },     /* R75  - Write Sequencer 5 */
 114        { 76,  0x1F25 },     /* R76  - Charge Pump 1 */
 115        { 81,  0x0000 },     /* R81  - Class W 0 */
 116        { 85,  0x054A },     /* R85  - DC Servo 1 */
 117        { 87,  0x0000 },     /* R87  - DC Servo 3 */
 118        { 96,  0x0100 },     /* R96  - Analogue HP 0 */
 119        { 98,  0x0000 },     /* R98  - EQ1 */
 120        { 99,  0x000C },     /* R99  - EQ2 */
 121        { 100, 0x000C },     /* R100 - EQ3 */
 122        { 101, 0x000C },     /* R101 - EQ4 */
 123        { 102, 0x000C },     /* R102 - EQ5 */
 124        { 103, 0x000C },     /* R103 - EQ6 */
 125        { 104, 0x0FCA },     /* R104 - EQ7 */
 126        { 105, 0x0400 },     /* R105 - EQ8 */
 127        { 106, 0x00D8 },     /* R106 - EQ9 */
 128        { 107, 0x1EB5 },     /* R107 - EQ10 */
 129        { 108, 0xF145 },     /* R108 - EQ11 */
 130        { 109, 0x0B75 },     /* R109 - EQ12 */
 131        { 110, 0x01C5 },     /* R110 - EQ13 */
 132        { 111, 0x1C58 },     /* R111 - EQ14 */
 133        { 112, 0xF373 },     /* R112 - EQ15 */
 134        { 113, 0x0A54 },     /* R113 - EQ16 */
 135        { 114, 0x0558 },     /* R114 - EQ17 */
 136        { 115, 0x168E },     /* R115 - EQ18 */
 137        { 116, 0xF829 },     /* R116 - EQ19 */
 138        { 117, 0x07AD },     /* R117 - EQ20 */
 139        { 118, 0x1103 },     /* R118 - EQ21 */
 140        { 119, 0x0564 },     /* R119 - EQ22 */
 141        { 120, 0x0559 },     /* R120 - EQ23 */
 142        { 121, 0x4000 },     /* R121 - EQ24 */
 143        { 122, 0x0000 },     /* R122 - Digital Pulls */
 144        { 123, 0x0F08 },     /* R123 - DRC Control 1 */
 145        { 124, 0x0000 },     /* R124 - DRC Control 2 */
 146        { 125, 0x0080 },     /* R125 - DRC Control 3 */
 147        { 126, 0x0000 },     /* R126 - DRC Control 4 */
 148};
 149
 150static struct {
 151        int ratio;
 152        int clk_sys_rate;
 153} clk_sys_rates[] = {
 154        { 64,   0 },
 155        { 128,  1 },
 156        { 192,  2 },
 157        { 256,  3 },
 158        { 384,  4 },
 159        { 512,  5 },
 160        { 768,  6 },
 161        { 1024, 7 },
 162        { 1408, 8 },
 163        { 1536, 9 },
 164};
 165
 166static struct {
 167        int rate;
 168        int sample_rate;
 169} sample_rates[] = {
 170        { 8000,  0  },
 171        { 11025, 1  },
 172        { 12000, 1  },
 173        { 16000, 2  },
 174        { 22050, 3  },
 175        { 24000, 3  },
 176        { 32000, 4  },
 177        { 44100, 5  },
 178        { 48000, 5  },
 179};
 180
 181static struct {
 182        int div; /* *10 due to .5s */
 183        int bclk_div;
 184} bclk_divs[] = {
 185        { 10,  0  },
 186        { 15,  1  },
 187        { 20,  2  },
 188        { 30,  3  },
 189        { 40,  4  },
 190        { 55,  5  },
 191        { 60,  6  },
 192        { 80,  7  },
 193        { 110, 8  },
 194        { 120, 9  },
 195        { 160, 10 },
 196        { 220, 11 },
 197        { 240, 12 },
 198        { 320, 13 },
 199        { 440, 14 },
 200        { 480, 15 },
 201};
 202
 203struct wm8993_priv {
 204        struct wm_hubs_data hubs_data;
 205        struct device *dev;
 206        struct regmap *regmap;
 207        struct regulator_bulk_data supplies[WM8993_NUM_SUPPLIES];
 208        struct wm8993_platform_data pdata;
 209        struct completion fll_lock;
 210        int master;
 211        int sysclk_source;
 212        int tdm_slots;
 213        int tdm_width;
 214        unsigned int mclk_rate;
 215        unsigned int sysclk_rate;
 216        unsigned int fs;
 217        unsigned int bclk;
 218        unsigned int fll_fref;
 219        unsigned int fll_fout;
 220        int fll_src;
 221};
 222
 223static bool wm8993_volatile(struct device *dev, unsigned int reg)
 224{
 225        switch (reg) {
 226        case WM8993_SOFTWARE_RESET:
 227        case WM8993_GPIO_CTRL_1:
 228        case WM8993_DC_SERVO_0:
 229        case WM8993_DC_SERVO_READBACK_0:
 230        case WM8993_DC_SERVO_READBACK_1:
 231        case WM8993_DC_SERVO_READBACK_2:
 232                return true;
 233        default:
 234                return false;
 235        }
 236}
 237
 238static bool wm8993_readable(struct device *dev, unsigned int reg)
 239{
 240        switch (reg) {
 241        case WM8993_SOFTWARE_RESET:
 242        case WM8993_POWER_MANAGEMENT_1:
 243        case WM8993_POWER_MANAGEMENT_2:
 244        case WM8993_POWER_MANAGEMENT_3:
 245        case WM8993_AUDIO_INTERFACE_1:
 246        case WM8993_AUDIO_INTERFACE_2:
 247        case WM8993_CLOCKING_1:
 248        case WM8993_CLOCKING_2:
 249        case WM8993_AUDIO_INTERFACE_3:
 250        case WM8993_AUDIO_INTERFACE_4:
 251        case WM8993_DAC_CTRL:
 252        case WM8993_LEFT_DAC_DIGITAL_VOLUME:
 253        case WM8993_RIGHT_DAC_DIGITAL_VOLUME:
 254        case WM8993_DIGITAL_SIDE_TONE:
 255        case WM8993_ADC_CTRL:
 256        case WM8993_LEFT_ADC_DIGITAL_VOLUME:
 257        case WM8993_RIGHT_ADC_DIGITAL_VOLUME:
 258        case WM8993_GPIO_CTRL_1:
 259        case WM8993_GPIO1:
 260        case WM8993_IRQ_DEBOUNCE:
 261        case WM8993_GPIOCTRL_2:
 262        case WM8993_GPIO_POL:
 263        case WM8993_LEFT_LINE_INPUT_1_2_VOLUME:
 264        case WM8993_LEFT_LINE_INPUT_3_4_VOLUME:
 265        case WM8993_RIGHT_LINE_INPUT_1_2_VOLUME:
 266        case WM8993_RIGHT_LINE_INPUT_3_4_VOLUME:
 267        case WM8993_LEFT_OUTPUT_VOLUME:
 268        case WM8993_RIGHT_OUTPUT_VOLUME:
 269        case WM8993_LINE_OUTPUTS_VOLUME:
 270        case WM8993_HPOUT2_VOLUME:
 271        case WM8993_LEFT_OPGA_VOLUME:
 272        case WM8993_RIGHT_OPGA_VOLUME:
 273        case WM8993_SPKMIXL_ATTENUATION:
 274        case WM8993_SPKMIXR_ATTENUATION:
 275        case WM8993_SPKOUT_MIXERS:
 276        case WM8993_SPKOUT_BOOST:
 277        case WM8993_SPEAKER_VOLUME_LEFT:
 278        case WM8993_SPEAKER_VOLUME_RIGHT:
 279        case WM8993_INPUT_MIXER2:
 280        case WM8993_INPUT_MIXER3:
 281        case WM8993_INPUT_MIXER4:
 282        case WM8993_INPUT_MIXER5:
 283        case WM8993_INPUT_MIXER6:
 284        case WM8993_OUTPUT_MIXER1:
 285        case WM8993_OUTPUT_MIXER2:
 286        case WM8993_OUTPUT_MIXER3:
 287        case WM8993_OUTPUT_MIXER4:
 288        case WM8993_OUTPUT_MIXER5:
 289        case WM8993_OUTPUT_MIXER6:
 290        case WM8993_HPOUT2_MIXER:
 291        case WM8993_LINE_MIXER1:
 292        case WM8993_LINE_MIXER2:
 293        case WM8993_SPEAKER_MIXER:
 294        case WM8993_ADDITIONAL_CONTROL:
 295        case WM8993_ANTIPOP1:
 296        case WM8993_ANTIPOP2:
 297        case WM8993_MICBIAS:
 298        case WM8993_FLL_CONTROL_1:
 299        case WM8993_FLL_CONTROL_2:
 300        case WM8993_FLL_CONTROL_3:
 301        case WM8993_FLL_CONTROL_4:
 302        case WM8993_FLL_CONTROL_5:
 303        case WM8993_CLOCKING_3:
 304        case WM8993_CLOCKING_4:
 305        case WM8993_MW_SLAVE_CONTROL:
 306        case WM8993_BUS_CONTROL_1:
 307        case WM8993_WRITE_SEQUENCER_0:
 308        case WM8993_WRITE_SEQUENCER_1:
 309        case WM8993_WRITE_SEQUENCER_2:
 310        case WM8993_WRITE_SEQUENCER_3:
 311        case WM8993_WRITE_SEQUENCER_4:
 312        case WM8993_WRITE_SEQUENCER_5:
 313        case WM8993_CHARGE_PUMP_1:
 314        case WM8993_CLASS_W_0:
 315        case WM8993_DC_SERVO_0:
 316        case WM8993_DC_SERVO_1:
 317        case WM8993_DC_SERVO_3:
 318        case WM8993_DC_SERVO_READBACK_0:
 319        case WM8993_DC_SERVO_READBACK_1:
 320        case WM8993_DC_SERVO_READBACK_2:
 321        case WM8993_ANALOGUE_HP_0:
 322        case WM8993_EQ1:
 323        case WM8993_EQ2:
 324        case WM8993_EQ3:
 325        case WM8993_EQ4:
 326        case WM8993_EQ5:
 327        case WM8993_EQ6:
 328        case WM8993_EQ7:
 329        case WM8993_EQ8:
 330        case WM8993_EQ9:
 331        case WM8993_EQ10:
 332        case WM8993_EQ11:
 333        case WM8993_EQ12:
 334        case WM8993_EQ13:
 335        case WM8993_EQ14:
 336        case WM8993_EQ15:
 337        case WM8993_EQ16:
 338        case WM8993_EQ17:
 339        case WM8993_EQ18:
 340        case WM8993_EQ19:
 341        case WM8993_EQ20:
 342        case WM8993_EQ21:
 343        case WM8993_EQ22:
 344        case WM8993_EQ23:
 345        case WM8993_EQ24:
 346        case WM8993_DIGITAL_PULLS:
 347        case WM8993_DRC_CONTROL_1:
 348        case WM8993_DRC_CONTROL_2:
 349        case WM8993_DRC_CONTROL_3:
 350        case WM8993_DRC_CONTROL_4:
 351                return true;
 352        default:
 353                return false;
 354        }
 355}
 356
 357struct _fll_div {
 358        u16 fll_fratio;
 359        u16 fll_outdiv;
 360        u16 fll_clk_ref_div;
 361        u16 n;
 362        u16 k;
 363};
 364
 365/* The size in bits of the FLL divide multiplied by 10
 366 * to allow rounding later */
 367#define FIXED_FLL_SIZE ((1 << 16) * 10)
 368
 369static struct {
 370        unsigned int min;
 371        unsigned int max;
 372        u16 fll_fratio;
 373        int ratio;
 374} fll_fratios[] = {
 375        {       0,    64000, 4, 16 },
 376        {   64000,   128000, 3,  8 },
 377        {  128000,   256000, 2,  4 },
 378        {  256000,  1000000, 1,  2 },
 379        { 1000000, 13500000, 0,  1 },
 380};
 381
 382static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
 383                       unsigned int Fout)
 384{
 385        u64 Kpart;
 386        unsigned int K, Ndiv, Nmod, target;
 387        unsigned int div;
 388        int i;
 389
 390        /* Fref must be <=13.5MHz */
 391        div = 1;
 392        fll_div->fll_clk_ref_div = 0;
 393        while ((Fref / div) > 13500000) {
 394                div *= 2;
 395                fll_div->fll_clk_ref_div++;
 396
 397                if (div > 8) {
 398                        pr_err("Can't scale %dMHz input down to <=13.5MHz\n",
 399                               Fref);
 400                        return -EINVAL;
 401                }
 402        }
 403
 404        pr_debug("Fref=%u Fout=%u\n", Fref, Fout);
 405
 406        /* Apply the division for our remaining calculations */
 407        Fref /= div;
 408
 409        /* Fvco should be 90-100MHz; don't check the upper bound */
 410        div = 0;
 411        target = Fout * 2;
 412        while (target < 90000000) {
 413                div++;
 414                target *= 2;
 415                if (div > 7) {
 416                        pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n",
 417                               Fout);
 418                        return -EINVAL;
 419                }
 420        }
 421        fll_div->fll_outdiv = div;
 422
 423        pr_debug("Fvco=%dHz\n", target);
 424
 425        /* Find an appropriate FLL_FRATIO and factor it out of the target */
 426        for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) {
 427                if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) {
 428                        fll_div->fll_fratio = fll_fratios[i].fll_fratio;
 429                        target /= fll_fratios[i].ratio;
 430                        break;
 431                }
 432        }
 433        if (i == ARRAY_SIZE(fll_fratios)) {
 434                pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref);
 435                return -EINVAL;
 436        }
 437
 438        /* Now, calculate N.K */
 439        Ndiv = target / Fref;
 440
 441        fll_div->n = Ndiv;
 442        Nmod = target % Fref;
 443        pr_debug("Nmod=%d\n", Nmod);
 444
 445        /* Calculate fractional part - scale up so we can round. */
 446        Kpart = FIXED_FLL_SIZE * (long long)Nmod;
 447
 448        do_div(Kpart, Fref);
 449
 450        K = Kpart & 0xFFFFFFFF;
 451
 452        if ((K % 10) >= 5)
 453                K += 5;
 454
 455        /* Move down to proper range now rounding is done */
 456        fll_div->k = K / 10;
 457
 458        pr_debug("N=%x K=%x FLL_FRATIO=%x FLL_OUTDIV=%x FLL_CLK_REF_DIV=%x\n",
 459                 fll_div->n, fll_div->k,
 460                 fll_div->fll_fratio, fll_div->fll_outdiv,
 461                 fll_div->fll_clk_ref_div);
 462
 463        return 0;
 464}
 465
 466static int _wm8993_set_fll(struct snd_soc_component *component, int fll_id, int source,
 467                          unsigned int Fref, unsigned int Fout)
 468{
 469        struct wm8993_priv *wm8993 = snd_soc_component_get_drvdata(component);
 470        struct i2c_client *i2c = to_i2c_client(component->dev);
 471        u16 reg1, reg4, reg5;
 472        struct _fll_div fll_div;
 473        unsigned int timeout;
 474        int ret;
 475
 476        /* Any change? */
 477        if (Fref == wm8993->fll_fref && Fout == wm8993->fll_fout)
 478                return 0;
 479
 480        /* Disable the FLL */
 481        if (Fout == 0) {
 482                dev_dbg(component->dev, "FLL disabled\n");
 483                wm8993->fll_fref = 0;
 484                wm8993->fll_fout = 0;
 485
 486                reg1 = snd_soc_component_read32(component, WM8993_FLL_CONTROL_1);
 487                reg1 &= ~WM8993_FLL_ENA;
 488                snd_soc_component_write(component, WM8993_FLL_CONTROL_1, reg1);
 489
 490                return 0;
 491        }
 492
 493        ret = fll_factors(&fll_div, Fref, Fout);
 494        if (ret != 0)
 495                return ret;
 496
 497        reg5 = snd_soc_component_read32(component, WM8993_FLL_CONTROL_5);
 498        reg5 &= ~WM8993_FLL_CLK_SRC_MASK;
 499
 500        switch (fll_id) {
 501        case WM8993_FLL_MCLK:
 502                break;
 503
 504        case WM8993_FLL_LRCLK:
 505                reg5 |= 1;
 506                break;
 507
 508        case WM8993_FLL_BCLK:
 509                reg5 |= 2;
 510                break;
 511
 512        default:
 513                dev_err(component->dev, "Unknown FLL ID %d\n", fll_id);
 514                return -EINVAL;
 515        }
 516
 517        /* Any FLL configuration change requires that the FLL be
 518         * disabled first. */
 519        reg1 = snd_soc_component_read32(component, WM8993_FLL_CONTROL_1);
 520        reg1 &= ~WM8993_FLL_ENA;
 521        snd_soc_component_write(component, WM8993_FLL_CONTROL_1, reg1);
 522
 523        /* Apply the configuration */
 524        if (fll_div.k)
 525                reg1 |= WM8993_FLL_FRAC_MASK;
 526        else
 527                reg1 &= ~WM8993_FLL_FRAC_MASK;
 528        snd_soc_component_write(component, WM8993_FLL_CONTROL_1, reg1);
 529
 530        snd_soc_component_write(component, WM8993_FLL_CONTROL_2,
 531                      (fll_div.fll_outdiv << WM8993_FLL_OUTDIV_SHIFT) |
 532                      (fll_div.fll_fratio << WM8993_FLL_FRATIO_SHIFT));
 533        snd_soc_component_write(component, WM8993_FLL_CONTROL_3, fll_div.k);
 534
 535        reg4 = snd_soc_component_read32(component, WM8993_FLL_CONTROL_4);
 536        reg4 &= ~WM8993_FLL_N_MASK;
 537        reg4 |= fll_div.n << WM8993_FLL_N_SHIFT;
 538        snd_soc_component_write(component, WM8993_FLL_CONTROL_4, reg4);
 539
 540        reg5 &= ~WM8993_FLL_CLK_REF_DIV_MASK;
 541        reg5 |= fll_div.fll_clk_ref_div << WM8993_FLL_CLK_REF_DIV_SHIFT;
 542        snd_soc_component_write(component, WM8993_FLL_CONTROL_5, reg5);
 543
 544        /* If we've got an interrupt wired up make sure we get it */
 545        if (i2c->irq)
 546                timeout = msecs_to_jiffies(20);
 547        else if (Fref < 1000000)
 548                timeout = msecs_to_jiffies(3);
 549        else
 550                timeout = msecs_to_jiffies(1);
 551
 552        try_wait_for_completion(&wm8993->fll_lock);
 553
 554        /* Enable the FLL */
 555        snd_soc_component_write(component, WM8993_FLL_CONTROL_1, reg1 | WM8993_FLL_ENA);
 556
 557        timeout = wait_for_completion_timeout(&wm8993->fll_lock, timeout);
 558        if (i2c->irq && !timeout)
 559                dev_warn(component->dev, "Timed out waiting for FLL\n");
 560
 561        dev_dbg(component->dev, "FLL enabled at %dHz->%dHz\n", Fref, Fout);
 562
 563        wm8993->fll_fref = Fref;
 564        wm8993->fll_fout = Fout;
 565        wm8993->fll_src = source;
 566
 567        return 0;
 568}
 569
 570static int wm8993_set_fll(struct snd_soc_dai *dai, int fll_id, int source,
 571                          unsigned int Fref, unsigned int Fout)
 572{
 573        return _wm8993_set_fll(dai->component, fll_id, source, Fref, Fout);
 574}
 575
 576static int configure_clock(struct snd_soc_component *component)
 577{
 578        struct wm8993_priv *wm8993 = snd_soc_component_get_drvdata(component);
 579        unsigned int reg;
 580
 581        /* This should be done on init() for bypass paths */
 582        switch (wm8993->sysclk_source) {
 583        case WM8993_SYSCLK_MCLK:
 584                dev_dbg(component->dev, "Using %dHz MCLK\n", wm8993->mclk_rate);
 585
 586                reg = snd_soc_component_read32(component, WM8993_CLOCKING_2);
 587                reg &= ~(WM8993_MCLK_DIV | WM8993_SYSCLK_SRC);
 588                if (wm8993->mclk_rate > 13500000) {
 589                        reg |= WM8993_MCLK_DIV;
 590                        wm8993->sysclk_rate = wm8993->mclk_rate / 2;
 591                } else {
 592                        reg &= ~WM8993_MCLK_DIV;
 593                        wm8993->sysclk_rate = wm8993->mclk_rate;
 594                }
 595                snd_soc_component_write(component, WM8993_CLOCKING_2, reg);
 596                break;
 597
 598        case WM8993_SYSCLK_FLL:
 599                dev_dbg(component->dev, "Using %dHz FLL clock\n",
 600                        wm8993->fll_fout);
 601
 602                reg = snd_soc_component_read32(component, WM8993_CLOCKING_2);
 603                reg |= WM8993_SYSCLK_SRC;
 604                if (wm8993->fll_fout > 13500000) {
 605                        reg |= WM8993_MCLK_DIV;
 606                        wm8993->sysclk_rate = wm8993->fll_fout / 2;
 607                } else {
 608                        reg &= ~WM8993_MCLK_DIV;
 609                        wm8993->sysclk_rate = wm8993->fll_fout;
 610                }
 611                snd_soc_component_write(component, WM8993_CLOCKING_2, reg);
 612                break;
 613
 614        default:
 615                dev_err(component->dev, "System clock not configured\n");
 616                return -EINVAL;
 617        }
 618
 619        dev_dbg(component->dev, "CLK_SYS is %dHz\n", wm8993->sysclk_rate);
 620
 621        return 0;
 622}
 623
 624static const DECLARE_TLV_DB_SCALE(sidetone_tlv, -3600, 300, 0);
 625static const DECLARE_TLV_DB_SCALE(drc_comp_threash, -4500, 75, 0);
 626static const DECLARE_TLV_DB_SCALE(drc_comp_amp, -2250, 75, 0);
 627static const DECLARE_TLV_DB_SCALE(drc_min_tlv, -1800, 600, 0);
 628static const DECLARE_TLV_DB_RANGE(drc_max_tlv,
 629        0, 2, TLV_DB_SCALE_ITEM(1200, 600, 0),
 630        3, 3, TLV_DB_SCALE_ITEM(3600, 0, 0)
 631);
 632static const DECLARE_TLV_DB_SCALE(drc_qr_tlv, 1200, 600, 0);
 633static const DECLARE_TLV_DB_SCALE(drc_startup_tlv, -1800, 300, 0);
 634static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
 635static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1);
 636static const DECLARE_TLV_DB_SCALE(dac_boost_tlv, 0, 600, 0);
 637
 638static const char *dac_deemph_text[] = {
 639        "None",
 640        "32kHz",
 641        "44.1kHz",
 642        "48kHz",
 643};
 644
 645static SOC_ENUM_SINGLE_DECL(dac_deemph,
 646                            WM8993_DAC_CTRL, 4, dac_deemph_text);
 647
 648static const char *adc_hpf_text[] = {
 649        "Hi-Fi",
 650        "Voice 1",
 651        "Voice 2",
 652        "Voice 3",
 653};
 654
 655static SOC_ENUM_SINGLE_DECL(adc_hpf,
 656                            WM8993_ADC_CTRL, 5, adc_hpf_text);
 657
 658static const char *drc_path_text[] = {
 659        "ADC",
 660        "DAC"
 661};
 662
 663static SOC_ENUM_SINGLE_DECL(drc_path,
 664                            WM8993_DRC_CONTROL_1, 14, drc_path_text);
 665
 666static const char *drc_r0_text[] = {
 667        "1",
 668        "1/2",
 669        "1/4",
 670        "1/8",
 671        "1/16",
 672        "0",
 673};
 674
 675static SOC_ENUM_SINGLE_DECL(drc_r0,
 676                            WM8993_DRC_CONTROL_3, 8, drc_r0_text);
 677
 678static const char *drc_r1_text[] = {
 679        "1",
 680        "1/2",
 681        "1/4",
 682        "1/8",
 683        "0",
 684};
 685
 686static SOC_ENUM_SINGLE_DECL(drc_r1,
 687                            WM8993_DRC_CONTROL_4, 13, drc_r1_text);
 688
 689static const char *drc_attack_text[] = {
 690        "Reserved",
 691        "181us",
 692        "363us",
 693        "726us",
 694        "1.45ms",
 695        "2.9ms",
 696        "5.8ms",
 697        "11.6ms",
 698        "23.2ms",
 699        "46.4ms",
 700        "92.8ms",
 701        "185.6ms",
 702};
 703
 704static SOC_ENUM_SINGLE_DECL(drc_attack,
 705                            WM8993_DRC_CONTROL_2, 12, drc_attack_text);
 706
 707static const char *drc_decay_text[] = {
 708        "186ms",
 709        "372ms",
 710        "743ms",
 711        "1.49s",
 712        "2.97ms",
 713        "5.94ms",
 714        "11.89ms",
 715        "23.78ms",
 716        "47.56ms",
 717};
 718
 719static SOC_ENUM_SINGLE_DECL(drc_decay,
 720                            WM8993_DRC_CONTROL_2, 8, drc_decay_text);
 721
 722static const char *drc_ff_text[] = {
 723        "5 samples",
 724        "9 samples",
 725};
 726
 727static SOC_ENUM_SINGLE_DECL(drc_ff,
 728                            WM8993_DRC_CONTROL_3, 7, drc_ff_text);
 729
 730static const char *drc_qr_rate_text[] = {
 731        "0.725ms",
 732        "1.45ms",
 733        "5.8ms",
 734};
 735
 736static SOC_ENUM_SINGLE_DECL(drc_qr_rate,
 737                            WM8993_DRC_CONTROL_3, 0, drc_qr_rate_text);
 738
 739static const char *drc_smooth_text[] = {
 740        "Low",
 741        "Medium",
 742        "High",
 743};
 744
 745static SOC_ENUM_SINGLE_DECL(drc_smooth,
 746                            WM8993_DRC_CONTROL_1, 4, drc_smooth_text);
 747
 748static const struct snd_kcontrol_new wm8993_snd_controls[] = {
 749SOC_DOUBLE_TLV("Digital Sidetone Volume", WM8993_DIGITAL_SIDE_TONE,
 750               5, 9, 12, 0, sidetone_tlv),
 751
 752SOC_SINGLE("DRC Switch", WM8993_DRC_CONTROL_1, 15, 1, 0),
 753SOC_ENUM("DRC Path", drc_path),
 754SOC_SINGLE_TLV("DRC Compressor Threshold Volume", WM8993_DRC_CONTROL_2,
 755               2, 60, 1, drc_comp_threash),
 756SOC_SINGLE_TLV("DRC Compressor Amplitude Volume", WM8993_DRC_CONTROL_3,
 757               11, 30, 1, drc_comp_amp),
 758SOC_ENUM("DRC R0", drc_r0),
 759SOC_ENUM("DRC R1", drc_r1),
 760SOC_SINGLE_TLV("DRC Minimum Volume", WM8993_DRC_CONTROL_1, 2, 3, 1,
 761               drc_min_tlv),
 762SOC_SINGLE_TLV("DRC Maximum Volume", WM8993_DRC_CONTROL_1, 0, 3, 0,
 763               drc_max_tlv),
 764SOC_ENUM("DRC Attack Rate", drc_attack),
 765SOC_ENUM("DRC Decay Rate", drc_decay),
 766SOC_ENUM("DRC FF Delay", drc_ff),
 767SOC_SINGLE("DRC Anti-clip Switch", WM8993_DRC_CONTROL_1, 9, 1, 0),
 768SOC_SINGLE("DRC Quick Release Switch", WM8993_DRC_CONTROL_1, 10, 1, 0),
 769SOC_SINGLE_TLV("DRC Quick Release Volume", WM8993_DRC_CONTROL_3, 2, 3, 0,
 770               drc_qr_tlv),
 771SOC_ENUM("DRC Quick Release Rate", drc_qr_rate),
 772SOC_SINGLE("DRC Smoothing Switch", WM8993_DRC_CONTROL_1, 11, 1, 0),
 773SOC_SINGLE("DRC Smoothing Hysteresis Switch", WM8993_DRC_CONTROL_1, 8, 1, 0),
 774SOC_ENUM("DRC Smoothing Hysteresis Threshold", drc_smooth),
 775SOC_SINGLE_TLV("DRC Startup Volume", WM8993_DRC_CONTROL_4, 8, 18, 0,
 776               drc_startup_tlv),
 777
 778SOC_SINGLE("EQ Switch", WM8993_EQ1, 0, 1, 0),
 779
 780SOC_DOUBLE_R_TLV("Capture Volume", WM8993_LEFT_ADC_DIGITAL_VOLUME,
 781                 WM8993_RIGHT_ADC_DIGITAL_VOLUME, 1, 96, 0, digital_tlv),
 782SOC_SINGLE("ADC High Pass Filter Switch", WM8993_ADC_CTRL, 8, 1, 0),
 783SOC_ENUM("ADC High Pass Filter Mode", adc_hpf),
 784
 785SOC_DOUBLE_R_TLV("Playback Volume", WM8993_LEFT_DAC_DIGITAL_VOLUME,
 786                 WM8993_RIGHT_DAC_DIGITAL_VOLUME, 1, 96, 0, digital_tlv),
 787SOC_SINGLE_TLV("Playback Boost Volume", WM8993_AUDIO_INTERFACE_2, 10, 3, 0,
 788               dac_boost_tlv),
 789SOC_ENUM("DAC Deemphasis", dac_deemph),
 790
 791SOC_SINGLE_TLV("SPKL DAC Volume", WM8993_SPKMIXL_ATTENUATION,
 792               2, 1, 1, wm_hubs_spkmix_tlv),
 793
 794SOC_SINGLE_TLV("SPKR DAC Volume", WM8993_SPKMIXR_ATTENUATION,
 795               2, 1, 1, wm_hubs_spkmix_tlv),
 796};
 797
 798static const struct snd_kcontrol_new wm8993_eq_controls[] = {
 799SOC_SINGLE_TLV("EQ1 Volume", WM8993_EQ2, 0, 24, 0, eq_tlv),
 800SOC_SINGLE_TLV("EQ2 Volume", WM8993_EQ3, 0, 24, 0, eq_tlv),
 801SOC_SINGLE_TLV("EQ3 Volume", WM8993_EQ4, 0, 24, 0, eq_tlv),
 802SOC_SINGLE_TLV("EQ4 Volume", WM8993_EQ5, 0, 24, 0, eq_tlv),
 803SOC_SINGLE_TLV("EQ5 Volume", WM8993_EQ6, 0, 24, 0, eq_tlv),
 804};
 805
 806static int clk_sys_event(struct snd_soc_dapm_widget *w,
 807                         struct snd_kcontrol *kcontrol, int event)
 808{
 809        struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
 810
 811        switch (event) {
 812        case SND_SOC_DAPM_PRE_PMU:
 813                return configure_clock(component);
 814
 815        case SND_SOC_DAPM_POST_PMD:
 816                break;
 817        }
 818
 819        return 0;
 820}
 821
 822static const struct snd_kcontrol_new left_speaker_mixer[] = {
 823SOC_DAPM_SINGLE("Input Switch", WM8993_SPEAKER_MIXER, 7, 1, 0),
 824SOC_DAPM_SINGLE("IN1LP Switch", WM8993_SPEAKER_MIXER, 5, 1, 0),
 825SOC_DAPM_SINGLE("Output Switch", WM8993_SPEAKER_MIXER, 3, 1, 0),
 826SOC_DAPM_SINGLE("DAC Switch", WM8993_SPEAKER_MIXER, 6, 1, 0),
 827};
 828
 829static const struct snd_kcontrol_new right_speaker_mixer[] = {
 830SOC_DAPM_SINGLE("Input Switch", WM8993_SPEAKER_MIXER, 6, 1, 0),
 831SOC_DAPM_SINGLE("IN1RP Switch", WM8993_SPEAKER_MIXER, 4, 1, 0),
 832SOC_DAPM_SINGLE("Output Switch", WM8993_SPEAKER_MIXER, 2, 1, 0),
 833SOC_DAPM_SINGLE("DAC Switch", WM8993_SPEAKER_MIXER, 0, 1, 0),
 834};
 835
 836static const char *aif_text[] = {
 837        "Left", "Right"
 838};
 839
 840static SOC_ENUM_SINGLE_DECL(aifoutl_enum,
 841                            WM8993_AUDIO_INTERFACE_1, 15, aif_text);
 842
 843static const struct snd_kcontrol_new aifoutl_mux =
 844        SOC_DAPM_ENUM("AIFOUTL Mux", aifoutl_enum);
 845
 846static SOC_ENUM_SINGLE_DECL(aifoutr_enum,
 847                            WM8993_AUDIO_INTERFACE_1, 14, aif_text);
 848
 849static const struct snd_kcontrol_new aifoutr_mux =
 850        SOC_DAPM_ENUM("AIFOUTR Mux", aifoutr_enum);
 851
 852static SOC_ENUM_SINGLE_DECL(aifinl_enum,
 853                            WM8993_AUDIO_INTERFACE_2, 15, aif_text);
 854
 855static const struct snd_kcontrol_new aifinl_mux =
 856        SOC_DAPM_ENUM("AIFINL Mux", aifinl_enum);
 857
 858static SOC_ENUM_SINGLE_DECL(aifinr_enum,
 859                            WM8993_AUDIO_INTERFACE_2, 14, aif_text);
 860
 861static const struct snd_kcontrol_new aifinr_mux =
 862        SOC_DAPM_ENUM("AIFINR Mux", aifinr_enum);
 863
 864static const char *sidetone_text[] = {
 865        "None", "Left", "Right"
 866};
 867
 868static SOC_ENUM_SINGLE_DECL(sidetonel_enum,
 869                            WM8993_DIGITAL_SIDE_TONE, 2, sidetone_text);
 870
 871static const struct snd_kcontrol_new sidetonel_mux =
 872        SOC_DAPM_ENUM("Left Sidetone", sidetonel_enum);
 873
 874static SOC_ENUM_SINGLE_DECL(sidetoner_enum,
 875                            WM8993_DIGITAL_SIDE_TONE, 0, sidetone_text);
 876
 877static const struct snd_kcontrol_new sidetoner_mux =
 878        SOC_DAPM_ENUM("Right Sidetone", sidetoner_enum);
 879
 880static const struct snd_soc_dapm_widget wm8993_dapm_widgets[] = {
 881SND_SOC_DAPM_SUPPLY("CLK_SYS", WM8993_BUS_CONTROL_1, 1, 0, clk_sys_event,
 882                    SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
 883SND_SOC_DAPM_SUPPLY("TOCLK", WM8993_CLOCKING_1, 14, 0, NULL, 0),
 884SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8993_CLOCKING_3, 0, 0, NULL, 0),
 885SND_SOC_DAPM_SUPPLY("VMID", SND_SOC_NOPM, 0, 0, NULL, 0),
 886
 887SND_SOC_DAPM_ADC("ADCL", NULL, WM8993_POWER_MANAGEMENT_2, 1, 0),
 888SND_SOC_DAPM_ADC("ADCR", NULL, WM8993_POWER_MANAGEMENT_2, 0, 0),
 889
 890SND_SOC_DAPM_MUX("AIFOUTL Mux", SND_SOC_NOPM, 0, 0, &aifoutl_mux),
 891SND_SOC_DAPM_MUX("AIFOUTR Mux", SND_SOC_NOPM, 0, 0, &aifoutr_mux),
 892
 893SND_SOC_DAPM_AIF_OUT("AIFOUTL", "Capture", 0, SND_SOC_NOPM, 0, 0),
 894SND_SOC_DAPM_AIF_OUT("AIFOUTR", "Capture", 1, SND_SOC_NOPM, 0, 0),
 895
 896SND_SOC_DAPM_AIF_IN("AIFINL", "Playback", 0, SND_SOC_NOPM, 0, 0),
 897SND_SOC_DAPM_AIF_IN("AIFINR", "Playback", 1, SND_SOC_NOPM, 0, 0),
 898
 899SND_SOC_DAPM_MUX("DACL Mux", SND_SOC_NOPM, 0, 0, &aifinl_mux),
 900SND_SOC_DAPM_MUX("DACR Mux", SND_SOC_NOPM, 0, 0, &aifinr_mux),
 901
 902SND_SOC_DAPM_MUX("DACL Sidetone", SND_SOC_NOPM, 0, 0, &sidetonel_mux),
 903SND_SOC_DAPM_MUX("DACR Sidetone", SND_SOC_NOPM, 0, 0, &sidetoner_mux),
 904
 905SND_SOC_DAPM_DAC("DACL", NULL, WM8993_POWER_MANAGEMENT_3, 1, 0),
 906SND_SOC_DAPM_DAC("DACR", NULL, WM8993_POWER_MANAGEMENT_3, 0, 0),
 907
 908SND_SOC_DAPM_MUX("Left Headphone Mux", SND_SOC_NOPM, 0, 0, &wm_hubs_hpl_mux),
 909SND_SOC_DAPM_MUX("Right Headphone Mux", SND_SOC_NOPM, 0, 0, &wm_hubs_hpr_mux),
 910
 911SND_SOC_DAPM_MIXER("SPKL", WM8993_POWER_MANAGEMENT_3, 8, 0,
 912                   left_speaker_mixer, ARRAY_SIZE(left_speaker_mixer)),
 913SND_SOC_DAPM_MIXER("SPKR", WM8993_POWER_MANAGEMENT_3, 9, 0,
 914                   right_speaker_mixer, ARRAY_SIZE(right_speaker_mixer)),
 915SND_SOC_DAPM_PGA("Direct Voice", SND_SOC_NOPM, 0, 0, NULL, 0),
 916};
 917
 918static const struct snd_soc_dapm_route routes[] = {
 919        { "MICBIAS1", NULL, "VMID" },
 920        { "MICBIAS2", NULL, "VMID" },
 921
 922        { "ADCL", NULL, "CLK_SYS" },
 923        { "ADCL", NULL, "CLK_DSP" },
 924        { "ADCR", NULL, "CLK_SYS" },
 925        { "ADCR", NULL, "CLK_DSP" },
 926
 927        { "AIFOUTL Mux", "Left", "ADCL" },
 928        { "AIFOUTL Mux", "Right", "ADCR" },
 929        { "AIFOUTR Mux", "Left", "ADCL" },
 930        { "AIFOUTR Mux", "Right", "ADCR" },
 931
 932        { "AIFOUTL", NULL, "AIFOUTL Mux" },
 933        { "AIFOUTR", NULL, "AIFOUTR Mux" },
 934
 935        { "DACL Mux", "Left", "AIFINL" },
 936        { "DACL Mux", "Right", "AIFINR" },
 937        { "DACR Mux", "Left", "AIFINL" },
 938        { "DACR Mux", "Right", "AIFINR" },
 939
 940        { "DACL Sidetone", "Left", "ADCL" },
 941        { "DACL Sidetone", "Right", "ADCR" },
 942        { "DACR Sidetone", "Left", "ADCL" },
 943        { "DACR Sidetone", "Right", "ADCR" },
 944
 945        { "DACL", NULL, "CLK_SYS" },
 946        { "DACL", NULL, "CLK_DSP" },
 947        { "DACL", NULL, "DACL Mux" },
 948        { "DACL", NULL, "DACL Sidetone" },
 949        { "DACR", NULL, "CLK_SYS" },
 950        { "DACR", NULL, "CLK_DSP" },
 951        { "DACR", NULL, "DACR Mux" },
 952        { "DACR", NULL, "DACR Sidetone" },
 953
 954        { "Left Output Mixer", "DAC Switch", "DACL" },
 955
 956        { "Right Output Mixer", "DAC Switch", "DACR" },
 957
 958        { "Left Output PGA", NULL, "CLK_SYS" },
 959
 960        { "Right Output PGA", NULL, "CLK_SYS" },
 961
 962        { "SPKL", "DAC Switch", "DACL" },
 963        { "SPKL", NULL, "CLK_SYS" },
 964
 965        { "SPKR", "DAC Switch", "DACR" },
 966        { "SPKR", NULL, "CLK_SYS" },
 967
 968        { "Left Headphone Mux", "DAC", "DACL" },
 969        { "Right Headphone Mux", "DAC", "DACR" },
 970};
 971
 972static int wm8993_set_bias_level(struct snd_soc_component *component,
 973                                 enum snd_soc_bias_level level)
 974{
 975        struct wm8993_priv *wm8993 = snd_soc_component_get_drvdata(component);
 976        int ret;
 977
 978        wm_hubs_set_bias_level(component, level);
 979
 980        switch (level) {
 981        case SND_SOC_BIAS_ON:
 982        case SND_SOC_BIAS_PREPARE:
 983                /* VMID=2*40k */
 984                snd_soc_component_update_bits(component, WM8993_POWER_MANAGEMENT_1,
 985                                    WM8993_VMID_SEL_MASK, 0x2);
 986                snd_soc_component_update_bits(component, WM8993_POWER_MANAGEMENT_2,
 987                                    WM8993_TSHUT_ENA, WM8993_TSHUT_ENA);
 988                break;
 989
 990        case SND_SOC_BIAS_STANDBY:
 991                if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) {
 992                        ret = regulator_bulk_enable(ARRAY_SIZE(wm8993->supplies),
 993                                                    wm8993->supplies);
 994                        if (ret != 0)
 995                                return ret;
 996
 997                        regcache_cache_only(wm8993->regmap, false);
 998                        regcache_sync(wm8993->regmap);
 999
1000                        wm_hubs_vmid_ena(component);
1001
1002                        /* Bring up VMID with fast soft start */
1003                        snd_soc_component_update_bits(component, WM8993_ANTIPOP2,
1004                                            WM8993_STARTUP_BIAS_ENA |
1005                                            WM8993_VMID_BUF_ENA |
1006                                            WM8993_VMID_RAMP_MASK |
1007                                            WM8993_BIAS_SRC,
1008                                            WM8993_STARTUP_BIAS_ENA |
1009                                            WM8993_VMID_BUF_ENA |
1010                                            WM8993_VMID_RAMP_MASK |
1011                                            WM8993_BIAS_SRC);
1012
1013                        /* If either line output is single ended we
1014                         * need the VMID buffer */
1015                        if (!wm8993->pdata.lineout1_diff ||
1016                            !wm8993->pdata.lineout2_diff)
1017                                snd_soc_component_update_bits(component, WM8993_ANTIPOP1,
1018                                                 WM8993_LINEOUT_VMID_BUF_ENA,
1019                                                 WM8993_LINEOUT_VMID_BUF_ENA);
1020
1021                        /* VMID=2*40k */
1022                        snd_soc_component_update_bits(component, WM8993_POWER_MANAGEMENT_1,
1023                                            WM8993_VMID_SEL_MASK |
1024                                            WM8993_BIAS_ENA,
1025                                            WM8993_BIAS_ENA | 0x2);
1026                        msleep(32);
1027
1028                        /* Switch to normal bias */
1029                        snd_soc_component_update_bits(component, WM8993_ANTIPOP2,
1030                                            WM8993_BIAS_SRC |
1031                                            WM8993_STARTUP_BIAS_ENA, 0);
1032                }
1033
1034                /* VMID=2*240k */
1035                snd_soc_component_update_bits(component, WM8993_POWER_MANAGEMENT_1,
1036                                    WM8993_VMID_SEL_MASK, 0x4);
1037
1038                snd_soc_component_update_bits(component, WM8993_POWER_MANAGEMENT_2,
1039                                    WM8993_TSHUT_ENA, 0);
1040                break;
1041
1042        case SND_SOC_BIAS_OFF:
1043                snd_soc_component_update_bits(component, WM8993_ANTIPOP1,
1044                                    WM8993_LINEOUT_VMID_BUF_ENA, 0);
1045
1046                snd_soc_component_update_bits(component, WM8993_POWER_MANAGEMENT_1,
1047                                    WM8993_VMID_SEL_MASK | WM8993_BIAS_ENA,
1048                                    0);
1049
1050                snd_soc_component_update_bits(component, WM8993_ANTIPOP2,
1051                                    WM8993_STARTUP_BIAS_ENA |
1052                                    WM8993_VMID_BUF_ENA |
1053                                    WM8993_VMID_RAMP_MASK |
1054                                    WM8993_BIAS_SRC, 0);
1055
1056                regcache_cache_only(wm8993->regmap, true);
1057                regcache_mark_dirty(wm8993->regmap);
1058
1059                regulator_bulk_disable(ARRAY_SIZE(wm8993->supplies),
1060                                       wm8993->supplies);
1061                break;
1062        }
1063
1064        return 0;
1065}
1066
1067static int wm8993_set_sysclk(struct snd_soc_dai *codec_dai,
1068                             int clk_id, unsigned int freq, int dir)
1069{
1070        struct snd_soc_component *component = codec_dai->component;
1071        struct wm8993_priv *wm8993 = snd_soc_component_get_drvdata(component);
1072
1073        switch (clk_id) {
1074        case WM8993_SYSCLK_MCLK:
1075                wm8993->mclk_rate = freq;
1076                /* fall through */
1077        case WM8993_SYSCLK_FLL:
1078                wm8993->sysclk_source = clk_id;
1079                break;
1080
1081        default:
1082                return -EINVAL;
1083        }
1084
1085        return 0;
1086}
1087
1088static int wm8993_set_dai_fmt(struct snd_soc_dai *dai,
1089                              unsigned int fmt)
1090{
1091        struct snd_soc_component *component = dai->component;
1092        struct wm8993_priv *wm8993 = snd_soc_component_get_drvdata(component);
1093        unsigned int aif1 = snd_soc_component_read32(component, WM8993_AUDIO_INTERFACE_1);
1094        unsigned int aif4 = snd_soc_component_read32(component, WM8993_AUDIO_INTERFACE_4);
1095
1096        aif1 &= ~(WM8993_BCLK_DIR | WM8993_AIF_BCLK_INV |
1097                  WM8993_AIF_LRCLK_INV | WM8993_AIF_FMT_MASK);
1098        aif4 &= ~WM8993_LRCLK_DIR;
1099
1100        switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
1101        case SND_SOC_DAIFMT_CBS_CFS:
1102                wm8993->master = 0;
1103                break;
1104        case SND_SOC_DAIFMT_CBS_CFM:
1105                aif4 |= WM8993_LRCLK_DIR;
1106                wm8993->master = 1;
1107                break;
1108        case SND_SOC_DAIFMT_CBM_CFS:
1109                aif1 |= WM8993_BCLK_DIR;
1110                wm8993->master = 1;
1111                break;
1112        case SND_SOC_DAIFMT_CBM_CFM:
1113                aif1 |= WM8993_BCLK_DIR;
1114                aif4 |= WM8993_LRCLK_DIR;
1115                wm8993->master = 1;
1116                break;
1117        default:
1118                return -EINVAL;
1119        }
1120
1121        switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
1122        case SND_SOC_DAIFMT_DSP_B:
1123                aif1 |= WM8993_AIF_LRCLK_INV;
1124                /* fall through */
1125        case SND_SOC_DAIFMT_DSP_A:
1126                aif1 |= 0x18;
1127                break;
1128        case SND_SOC_DAIFMT_I2S:
1129                aif1 |= 0x10;
1130                break;
1131        case SND_SOC_DAIFMT_RIGHT_J:
1132                break;
1133        case SND_SOC_DAIFMT_LEFT_J:
1134                aif1 |= 0x8;
1135                break;
1136        default:
1137                return -EINVAL;
1138        }
1139
1140        switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
1141        case SND_SOC_DAIFMT_DSP_A:
1142        case SND_SOC_DAIFMT_DSP_B:
1143                /* frame inversion not valid for DSP modes */
1144                switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
1145                case SND_SOC_DAIFMT_NB_NF:
1146                        break;
1147                case SND_SOC_DAIFMT_IB_NF:
1148                        aif1 |= WM8993_AIF_BCLK_INV;
1149                        break;
1150                default:
1151                        return -EINVAL;
1152                }
1153                break;
1154
1155        case SND_SOC_DAIFMT_I2S:
1156        case SND_SOC_DAIFMT_RIGHT_J:
1157        case SND_SOC_DAIFMT_LEFT_J:
1158                switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
1159                case SND_SOC_DAIFMT_NB_NF:
1160                        break;
1161                case SND_SOC_DAIFMT_IB_IF:
1162                        aif1 |= WM8993_AIF_BCLK_INV | WM8993_AIF_LRCLK_INV;
1163                        break;
1164                case SND_SOC_DAIFMT_IB_NF:
1165                        aif1 |= WM8993_AIF_BCLK_INV;
1166                        break;
1167                case SND_SOC_DAIFMT_NB_IF:
1168                        aif1 |= WM8993_AIF_LRCLK_INV;
1169                        break;
1170                default:
1171                        return -EINVAL;
1172                }
1173                break;
1174        default:
1175                return -EINVAL;
1176        }
1177
1178        snd_soc_component_write(component, WM8993_AUDIO_INTERFACE_1, aif1);
1179        snd_soc_component_write(component, WM8993_AUDIO_INTERFACE_4, aif4);
1180
1181        return 0;
1182}
1183
1184static int wm8993_hw_params(struct snd_pcm_substream *substream,
1185                            struct snd_pcm_hw_params *params,
1186                            struct snd_soc_dai *dai)
1187{
1188        struct snd_soc_component *component = dai->component;
1189        struct wm8993_priv *wm8993 = snd_soc_component_get_drvdata(component);
1190        int ret, i, best, best_val, cur_val;
1191        unsigned int clocking1, clocking3, aif1, aif4;
1192
1193        clocking1 = snd_soc_component_read32(component, WM8993_CLOCKING_1);
1194        clocking1 &= ~WM8993_BCLK_DIV_MASK;
1195
1196        clocking3 = snd_soc_component_read32(component, WM8993_CLOCKING_3);
1197        clocking3 &= ~(WM8993_CLK_SYS_RATE_MASK | WM8993_SAMPLE_RATE_MASK);
1198
1199        aif1 = snd_soc_component_read32(component, WM8993_AUDIO_INTERFACE_1);
1200        aif1 &= ~WM8993_AIF_WL_MASK;
1201
1202        aif4 = snd_soc_component_read32(component, WM8993_AUDIO_INTERFACE_4);
1203        aif4 &= ~WM8993_LRCLK_RATE_MASK;
1204
1205        /* What BCLK do we need? */
1206        wm8993->fs = params_rate(params);
1207        wm8993->bclk = 2 * wm8993->fs;
1208        if (wm8993->tdm_slots) {
1209                dev_dbg(component->dev, "Configuring for %d %d bit TDM slots\n",
1210                        wm8993->tdm_slots, wm8993->tdm_width);
1211                wm8993->bclk *= wm8993->tdm_width * wm8993->tdm_slots;
1212        } else {
1213                switch (params_width(params)) {
1214                case 16:
1215                        wm8993->bclk *= 16;
1216                        break;
1217                case 20:
1218                        wm8993->bclk *= 20;
1219                        aif1 |= 0x8;
1220                        break;
1221                case 24:
1222                        wm8993->bclk *= 24;
1223                        aif1 |= 0x10;
1224                        break;
1225                case 32:
1226                        wm8993->bclk *= 32;
1227                        aif1 |= 0x18;
1228                        break;
1229                default:
1230                        return -EINVAL;
1231                }
1232        }
1233
1234        dev_dbg(component->dev, "Target BCLK is %dHz\n", wm8993->bclk);
1235
1236        ret = configure_clock(component);
1237        if (ret != 0)
1238                return ret;
1239
1240        /* Select nearest CLK_SYS_RATE */
1241        best = 0;
1242        best_val = abs((wm8993->sysclk_rate / clk_sys_rates[0].ratio)
1243                       - wm8993->fs);
1244        for (i = 1; i < ARRAY_SIZE(clk_sys_rates); i++) {
1245                cur_val = abs((wm8993->sysclk_rate /
1246                               clk_sys_rates[i].ratio) - wm8993->fs);
1247                if (cur_val < best_val) {
1248                        best = i;
1249                        best_val = cur_val;
1250                }
1251        }
1252        dev_dbg(component->dev, "Selected CLK_SYS_RATIO of %d\n",
1253                clk_sys_rates[best].ratio);
1254        clocking3 |= (clk_sys_rates[best].clk_sys_rate
1255                      << WM8993_CLK_SYS_RATE_SHIFT);
1256
1257        /* SAMPLE_RATE */
1258        best = 0;
1259        best_val = abs(wm8993->fs - sample_rates[0].rate);
1260        for (i = 1; i < ARRAY_SIZE(sample_rates); i++) {
1261                /* Closest match */
1262                cur_val = abs(wm8993->fs - sample_rates[i].rate);
1263                if (cur_val < best_val) {
1264                        best = i;
1265                        best_val = cur_val;
1266                }
1267        }
1268        dev_dbg(component->dev, "Selected SAMPLE_RATE of %dHz\n",
1269                sample_rates[best].rate);
1270        clocking3 |= (sample_rates[best].sample_rate
1271                      << WM8993_SAMPLE_RATE_SHIFT);
1272
1273        /* BCLK_DIV */
1274        best = 0;
1275        best_val = INT_MAX;
1276        for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) {
1277                cur_val = ((wm8993->sysclk_rate * 10) / bclk_divs[i].div)
1278                        - wm8993->bclk;
1279                if (cur_val < 0) /* Table is sorted */
1280                        break;
1281                if (cur_val < best_val) {
1282                        best = i;
1283                        best_val = cur_val;
1284                }
1285        }
1286        wm8993->bclk = (wm8993->sysclk_rate * 10) / bclk_divs[best].div;
1287        dev_dbg(component->dev, "Selected BCLK_DIV of %d for %dHz BCLK\n",
1288                bclk_divs[best].div, wm8993->bclk);
1289        clocking1 |= bclk_divs[best].bclk_div << WM8993_BCLK_DIV_SHIFT;
1290
1291        /* LRCLK is a simple fraction of BCLK */
1292        dev_dbg(component->dev, "LRCLK_RATE is %d\n", wm8993->bclk / wm8993->fs);
1293        aif4 |= wm8993->bclk / wm8993->fs;
1294
1295        snd_soc_component_write(component, WM8993_CLOCKING_1, clocking1);
1296        snd_soc_component_write(component, WM8993_CLOCKING_3, clocking3);
1297        snd_soc_component_write(component, WM8993_AUDIO_INTERFACE_1, aif1);
1298        snd_soc_component_write(component, WM8993_AUDIO_INTERFACE_4, aif4);
1299
1300        /* ReTune Mobile? */
1301        if (wm8993->pdata.num_retune_configs) {
1302                u16 eq1 = snd_soc_component_read32(component, WM8993_EQ1);
1303                struct wm8993_retune_mobile_setting *s;
1304
1305                best = 0;
1306                best_val = abs(wm8993->pdata.retune_configs[0].rate
1307                               - wm8993->fs);
1308                for (i = 0; i < wm8993->pdata.num_retune_configs; i++) {
1309                        cur_val = abs(wm8993->pdata.retune_configs[i].rate
1310                                      - wm8993->fs);
1311                        if (cur_val < best_val) {
1312                                best_val = cur_val;
1313                                best = i;
1314                        }
1315                }
1316                s = &wm8993->pdata.retune_configs[best];
1317
1318                dev_dbg(component->dev, "ReTune Mobile %s tuned for %dHz\n",
1319                        s->name, s->rate);
1320
1321                /* Disable EQ while we reconfigure */
1322                snd_soc_component_update_bits(component, WM8993_EQ1, WM8993_EQ_ENA, 0);
1323
1324                for (i = 1; i < ARRAY_SIZE(s->config); i++)
1325                        snd_soc_component_write(component, WM8993_EQ1 + i, s->config[i]);
1326
1327                snd_soc_component_update_bits(component, WM8993_EQ1, WM8993_EQ_ENA, eq1);
1328        }
1329
1330        return 0;
1331}
1332
1333static int wm8993_digital_mute(struct snd_soc_dai *codec_dai, int mute)
1334{
1335        struct snd_soc_component *component = codec_dai->component;
1336        unsigned int reg;
1337
1338        reg = snd_soc_component_read32(component, WM8993_DAC_CTRL);
1339
1340        if (mute)
1341                reg |= WM8993_DAC_MUTE;
1342        else
1343                reg &= ~WM8993_DAC_MUTE;
1344
1345        snd_soc_component_write(component, WM8993_DAC_CTRL, reg);
1346
1347        return 0;
1348}
1349
1350static int wm8993_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
1351                               unsigned int rx_mask, int slots, int slot_width)
1352{
1353        struct snd_soc_component *component = dai->component;
1354        struct wm8993_priv *wm8993 = snd_soc_component_get_drvdata(component);
1355        int aif1 = 0;
1356        int aif2 = 0;
1357
1358        /* Don't need to validate anything if we're turning off TDM */
1359        if (slots == 0) {
1360                wm8993->tdm_slots = 0;
1361                goto out;
1362        }
1363
1364        /* Note that we allow configurations we can't handle ourselves - 
1365         * for example, we can generate clocks for slots 2 and up even if
1366         * we can't use those slots ourselves.
1367         */
1368        aif1 |= WM8993_AIFADC_TDM;
1369        aif2 |= WM8993_AIFDAC_TDM;
1370
1371        switch (rx_mask) {
1372        case 3:
1373                break;
1374        case 0xc:
1375                aif1 |= WM8993_AIFADC_TDM_CHAN;
1376                break;
1377        default:
1378                return -EINVAL;
1379        }
1380
1381
1382        switch (tx_mask) {
1383        case 3:
1384                break;
1385        case 0xc:
1386                aif2 |= WM8993_AIFDAC_TDM_CHAN;
1387                break;
1388        default:
1389                return -EINVAL;
1390        }
1391
1392out:
1393        wm8993->tdm_width = slot_width;
1394        wm8993->tdm_slots = slots / 2;
1395
1396        snd_soc_component_update_bits(component, WM8993_AUDIO_INTERFACE_1,
1397                            WM8993_AIFADC_TDM | WM8993_AIFADC_TDM_CHAN, aif1);
1398        snd_soc_component_update_bits(component, WM8993_AUDIO_INTERFACE_2,
1399                            WM8993_AIFDAC_TDM | WM8993_AIFDAC_TDM_CHAN, aif2);
1400
1401        return 0;
1402}
1403
1404static irqreturn_t wm8993_irq(int irq, void *data)
1405{
1406        struct wm8993_priv *wm8993 = data;
1407        int mask, val, ret;
1408
1409        ret = regmap_read(wm8993->regmap, WM8993_GPIO_CTRL_1, &val);
1410        if (ret != 0) {
1411                dev_err(wm8993->dev, "Failed to read interrupt status: %d\n",
1412                        ret);
1413                return IRQ_NONE;
1414        }
1415
1416        ret = regmap_read(wm8993->regmap, WM8993_GPIOCTRL_2, &mask);
1417        if (ret != 0) {
1418                dev_err(wm8993->dev, "Failed to read interrupt mask: %d\n",
1419                        ret);
1420                return IRQ_NONE;
1421        }
1422
1423        /* The IRQ pin status is visible in the register too */
1424        val &= ~(mask | WM8993_IRQ);
1425        if (!val)
1426                return IRQ_NONE;
1427
1428        if (val & WM8993_TEMPOK_EINT)
1429                dev_crit(wm8993->dev, "Thermal warning\n");
1430
1431        if (val & WM8993_FLL_LOCK_EINT) {
1432                dev_dbg(wm8993->dev, "FLL locked\n");
1433                complete(&wm8993->fll_lock);
1434        }
1435
1436        ret = regmap_write(wm8993->regmap, WM8993_GPIO_CTRL_1, val);
1437        if (ret != 0)
1438                dev_err(wm8993->dev, "Failed to ack interrupt: %d\n", ret);
1439
1440        return IRQ_HANDLED;
1441}
1442
1443static const struct snd_soc_dai_ops wm8993_ops = {
1444        .set_sysclk = wm8993_set_sysclk,
1445        .set_fmt = wm8993_set_dai_fmt,
1446        .hw_params = wm8993_hw_params,
1447        .digital_mute = wm8993_digital_mute,
1448        .set_pll = wm8993_set_fll,
1449        .set_tdm_slot = wm8993_set_tdm_slot,
1450};
1451
1452#define WM8993_RATES SNDRV_PCM_RATE_8000_48000
1453
1454#define WM8993_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
1455                        SNDRV_PCM_FMTBIT_S20_3LE |\
1456                        SNDRV_PCM_FMTBIT_S24_LE |\
1457                        SNDRV_PCM_FMTBIT_S32_LE)
1458
1459static struct snd_soc_dai_driver wm8993_dai = {
1460        .name = "wm8993-hifi",
1461        .playback = {
1462                .stream_name = "Playback",
1463                .channels_min = 1,
1464                .channels_max = 2,
1465                .rates = WM8993_RATES,
1466                .formats = WM8993_FORMATS,
1467                .sig_bits = 24,
1468        },
1469        .capture = {
1470                 .stream_name = "Capture",
1471                 .channels_min = 1,
1472                 .channels_max = 2,
1473                 .rates = WM8993_RATES,
1474                 .formats = WM8993_FORMATS,
1475                 .sig_bits = 24,
1476         },
1477        .ops = &wm8993_ops,
1478        .symmetric_rates = 1,
1479};
1480
1481static int wm8993_probe(struct snd_soc_component *component)
1482{
1483        struct wm8993_priv *wm8993 = snd_soc_component_get_drvdata(component);
1484        struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
1485
1486        wm8993->hubs_data.hp_startup_mode = 1;
1487        wm8993->hubs_data.dcs_codes_l = -2;
1488        wm8993->hubs_data.dcs_codes_r = -2;
1489        wm8993->hubs_data.series_startup = 1;
1490
1491        /* Latch volume update bits and default ZC on */
1492        snd_soc_component_update_bits(component, WM8993_RIGHT_DAC_DIGITAL_VOLUME,
1493                            WM8993_DAC_VU, WM8993_DAC_VU);
1494        snd_soc_component_update_bits(component, WM8993_RIGHT_ADC_DIGITAL_VOLUME,
1495                            WM8993_ADC_VU, WM8993_ADC_VU);
1496
1497        /* Manualy manage the HPOUT sequencing for independent stereo
1498         * control. */
1499        snd_soc_component_update_bits(component, WM8993_ANALOGUE_HP_0,
1500                            WM8993_HPOUT1_AUTO_PU, 0);
1501
1502        /* Use automatic clock configuration */
1503        snd_soc_component_update_bits(component, WM8993_CLOCKING_4, WM8993_SR_MODE, 0);
1504
1505        wm_hubs_handle_analogue_pdata(component, wm8993->pdata.lineout1_diff,
1506                                      wm8993->pdata.lineout2_diff,
1507                                      wm8993->pdata.lineout1fb,
1508                                      wm8993->pdata.lineout2fb,
1509                                      wm8993->pdata.jd_scthr,
1510                                      wm8993->pdata.jd_thr,
1511                                      wm8993->pdata.micbias1_delay,
1512                                      wm8993->pdata.micbias2_delay,
1513                                      wm8993->pdata.micbias1_lvl,
1514                                      wm8993->pdata.micbias2_lvl);
1515
1516        snd_soc_add_component_controls(component, wm8993_snd_controls,
1517                             ARRAY_SIZE(wm8993_snd_controls));
1518        if (wm8993->pdata.num_retune_configs != 0) {
1519                dev_dbg(component->dev, "Using ReTune Mobile\n");
1520        } else {
1521                dev_dbg(component->dev, "No ReTune Mobile, using normal EQ\n");
1522                snd_soc_add_component_controls(component, wm8993_eq_controls,
1523                                     ARRAY_SIZE(wm8993_eq_controls));
1524        }
1525
1526        snd_soc_dapm_new_controls(dapm, wm8993_dapm_widgets,
1527                                  ARRAY_SIZE(wm8993_dapm_widgets));
1528        wm_hubs_add_analogue_controls(component);
1529
1530        snd_soc_dapm_add_routes(dapm, routes, ARRAY_SIZE(routes));
1531        wm_hubs_add_analogue_routes(component, wm8993->pdata.lineout1_diff,
1532                                    wm8993->pdata.lineout2_diff);
1533
1534        /* If the line outputs are differential then we aren't presenting
1535         * VMID as an output and can disable it.
1536         */
1537        if (wm8993->pdata.lineout1_diff && wm8993->pdata.lineout2_diff)
1538                dapm->idle_bias_off = 1;
1539
1540        return 0;
1541
1542}
1543
1544#ifdef CONFIG_PM
1545static int wm8993_suspend(struct snd_soc_component *component)
1546{
1547        struct wm8993_priv *wm8993 = snd_soc_component_get_drvdata(component);
1548        int fll_fout = wm8993->fll_fout;
1549        int fll_fref  = wm8993->fll_fref;
1550        int ret;
1551
1552        /* Stop the FLL in an orderly fashion */
1553        ret = _wm8993_set_fll(component, 0, 0, 0, 0);
1554        if (ret != 0) {
1555                dev_err(component->dev, "Failed to stop FLL\n");
1556                return ret;
1557        }
1558
1559        wm8993->fll_fout = fll_fout;
1560        wm8993->fll_fref = fll_fref;
1561
1562        snd_soc_component_force_bias_level(component, SND_SOC_BIAS_OFF);
1563
1564        return 0;
1565}
1566
1567static int wm8993_resume(struct snd_soc_component *component)
1568{
1569        struct wm8993_priv *wm8993 = snd_soc_component_get_drvdata(component);
1570        int ret;
1571
1572        snd_soc_component_force_bias_level(component, SND_SOC_BIAS_STANDBY);
1573
1574        /* Restart the FLL? */
1575        if (wm8993->fll_fout) {
1576                int fll_fout = wm8993->fll_fout;
1577                int fll_fref  = wm8993->fll_fref;
1578
1579                wm8993->fll_fref = 0;
1580                wm8993->fll_fout = 0;
1581
1582                ret = _wm8993_set_fll(component, 0, wm8993->fll_src,
1583                                     fll_fref, fll_fout);
1584                if (ret != 0)
1585                        dev_err(component->dev, "Failed to restart FLL\n");
1586        }
1587
1588        return 0;
1589}
1590#else
1591#define wm8993_suspend NULL
1592#define wm8993_resume NULL
1593#endif
1594
1595/* Tune DC servo configuration */
1596static const struct reg_sequence wm8993_regmap_patch[] = {
1597        { 0x44, 3 },
1598        { 0x56, 3 },
1599        { 0x44, 0 },
1600};
1601
1602static const struct regmap_config wm8993_regmap = {
1603        .reg_bits = 8,
1604        .val_bits = 16,
1605
1606        .max_register = WM8993_MAX_REGISTER,
1607        .volatile_reg = wm8993_volatile,
1608        .readable_reg = wm8993_readable,
1609
1610        .cache_type = REGCACHE_RBTREE,
1611        .reg_defaults = wm8993_reg_defaults,
1612        .num_reg_defaults = ARRAY_SIZE(wm8993_reg_defaults),
1613};
1614
1615static const struct snd_soc_component_driver soc_component_dev_wm8993 = {
1616        .probe                  = wm8993_probe,
1617        .suspend                = wm8993_suspend,
1618        .resume                 = wm8993_resume,
1619        .set_bias_level         = wm8993_set_bias_level,
1620        .idle_bias_on           = 1,
1621        .use_pmdown_time        = 1,
1622        .endianness             = 1,
1623        .non_legacy_dai_naming  = 1,
1624};
1625
1626static int wm8993_i2c_probe(struct i2c_client *i2c,
1627                            const struct i2c_device_id *id)
1628{
1629        struct wm8993_priv *wm8993;
1630        unsigned int reg;
1631        int ret, i;
1632
1633        wm8993 = devm_kzalloc(&i2c->dev, sizeof(struct wm8993_priv),
1634                              GFP_KERNEL);
1635        if (wm8993 == NULL)
1636                return -ENOMEM;
1637
1638        wm8993->dev = &i2c->dev;
1639        init_completion(&wm8993->fll_lock);
1640
1641        wm8993->regmap = devm_regmap_init_i2c(i2c, &wm8993_regmap);
1642        if (IS_ERR(wm8993->regmap)) {
1643                ret = PTR_ERR(wm8993->regmap);
1644                dev_err(&i2c->dev, "Failed to allocate regmap: %d\n", ret);
1645                return ret;
1646        }
1647
1648        i2c_set_clientdata(i2c, wm8993);
1649
1650        for (i = 0; i < ARRAY_SIZE(wm8993->supplies); i++)
1651                wm8993->supplies[i].supply = wm8993_supply_names[i];
1652
1653        ret = devm_regulator_bulk_get(&i2c->dev, ARRAY_SIZE(wm8993->supplies),
1654                                 wm8993->supplies);
1655        if (ret != 0) {
1656                dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret);
1657                return ret;
1658        }
1659
1660        ret = regulator_bulk_enable(ARRAY_SIZE(wm8993->supplies),
1661                                    wm8993->supplies);
1662        if (ret != 0) {
1663                dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret);
1664                return ret;
1665        }
1666
1667        ret = regmap_read(wm8993->regmap, WM8993_SOFTWARE_RESET, &reg);
1668        if (ret != 0) {
1669                dev_err(&i2c->dev, "Failed to read chip ID: %d\n", ret);
1670                goto err_enable;
1671        }
1672
1673        if (reg != 0x8993) {
1674                dev_err(&i2c->dev, "Invalid ID register value %x\n", reg);
1675                ret = -EINVAL;
1676                goto err_enable;
1677        }
1678
1679        ret = regmap_write(wm8993->regmap, WM8993_SOFTWARE_RESET, 0xffff);
1680        if (ret != 0)
1681                goto err_enable;
1682
1683        ret = regmap_register_patch(wm8993->regmap, wm8993_regmap_patch,
1684                                    ARRAY_SIZE(wm8993_regmap_patch));
1685        if (ret != 0)
1686                dev_warn(wm8993->dev, "Failed to apply regmap patch: %d\n",
1687                         ret);
1688
1689        if (i2c->irq) {
1690                /* Put GPIO1 into interrupt mode (only GPIO1 can output IRQ) */
1691                ret = regmap_update_bits(wm8993->regmap, WM8993_GPIO1,
1692                                         WM8993_GPIO1_PD |
1693                                         WM8993_GPIO1_SEL_MASK, 7);
1694                if (ret != 0)
1695                        goto err_enable;
1696
1697                ret = request_threaded_irq(i2c->irq, NULL, wm8993_irq,
1698                                           IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
1699                                           "wm8993", wm8993);
1700                if (ret != 0)
1701                        goto err_enable;
1702
1703        }
1704
1705        regulator_bulk_disable(ARRAY_SIZE(wm8993->supplies), wm8993->supplies);
1706
1707        regcache_cache_only(wm8993->regmap, true);
1708
1709        ret = devm_snd_soc_register_component(&i2c->dev,
1710                        &soc_component_dev_wm8993, &wm8993_dai, 1);
1711        if (ret != 0) {
1712                dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret);
1713                goto err_irq;
1714        }
1715
1716        return 0;
1717
1718err_irq:
1719        if (i2c->irq)
1720                free_irq(i2c->irq, wm8993);
1721err_enable:
1722        regulator_bulk_disable(ARRAY_SIZE(wm8993->supplies), wm8993->supplies);
1723        return ret;
1724}
1725
1726static int wm8993_i2c_remove(struct i2c_client *i2c)
1727{
1728        struct wm8993_priv *wm8993 = i2c_get_clientdata(i2c);
1729
1730        if (i2c->irq)
1731                free_irq(i2c->irq, wm8993);
1732        regulator_bulk_disable(ARRAY_SIZE(wm8993->supplies), wm8993->supplies);
1733
1734        return 0;
1735}
1736
1737static const struct i2c_device_id wm8993_i2c_id[] = {
1738        { "wm8993", 0 },
1739        { }
1740};
1741MODULE_DEVICE_TABLE(i2c, wm8993_i2c_id);
1742
1743static struct i2c_driver wm8993_i2c_driver = {
1744        .driver = {
1745                .name = "wm8993",
1746        },
1747        .probe =    wm8993_i2c_probe,
1748        .remove =   wm8993_i2c_remove,
1749        .id_table = wm8993_i2c_id,
1750};
1751
1752module_i2c_driver(wm8993_i2c_driver);
1753
1754MODULE_DESCRIPTION("ASoC WM8993 driver");
1755MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
1756MODULE_LICENSE("GPL");
1757