1/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ 2/* 3 * Performance events: 4 * 5 * Copyright (C) 2008-2009, Thomas Gleixner <tglx@linutronix.de> 6 * Copyright (C) 2008-2011, Red Hat, Inc., Ingo Molnar 7 * Copyright (C) 2008-2011, Red Hat, Inc., Peter Zijlstra 8 * 9 * Data type definitions, declarations, prototypes. 10 * 11 * Started by: Thomas Gleixner and Ingo Molnar 12 * 13 * For licencing details see kernel-base/COPYING 14 */ 15#ifndef _UAPI_LINUX_PERF_EVENT_H 16#define _UAPI_LINUX_PERF_EVENT_H 17 18#include <linux/types.h> 19#include <linux/ioctl.h> 20#include <asm/byteorder.h> 21 22/* 23 * User-space ABI bits: 24 */ 25 26/* 27 * attr.type 28 */ 29enum perf_type_id { 30 PERF_TYPE_HARDWARE = 0, 31 PERF_TYPE_SOFTWARE = 1, 32 PERF_TYPE_TRACEPOINT = 2, 33 PERF_TYPE_HW_CACHE = 3, 34 PERF_TYPE_RAW = 4, 35 PERF_TYPE_BREAKPOINT = 5, 36 37 PERF_TYPE_MAX, /* non-ABI */ 38}; 39 40/* 41 * Generalized performance event event_id types, used by the 42 * attr.event_id parameter of the sys_perf_event_open() 43 * syscall: 44 */ 45enum perf_hw_id { 46 /* 47 * Common hardware events, generalized by the kernel: 48 */ 49 PERF_COUNT_HW_CPU_CYCLES = 0, 50 PERF_COUNT_HW_INSTRUCTIONS = 1, 51 PERF_COUNT_HW_CACHE_REFERENCES = 2, 52 PERF_COUNT_HW_CACHE_MISSES = 3, 53 PERF_COUNT_HW_BRANCH_INSTRUCTIONS = 4, 54 PERF_COUNT_HW_BRANCH_MISSES = 5, 55 PERF_COUNT_HW_BUS_CYCLES = 6, 56 PERF_COUNT_HW_STALLED_CYCLES_FRONTEND = 7, 57 PERF_COUNT_HW_STALLED_CYCLES_BACKEND = 8, 58 PERF_COUNT_HW_REF_CPU_CYCLES = 9, 59 60 PERF_COUNT_HW_MAX, /* non-ABI */ 61}; 62 63/* 64 * Generalized hardware cache events: 65 * 66 * { L1-D, L1-I, LLC, ITLB, DTLB, BPU, NODE } x 67 * { read, write, prefetch } x 68 * { accesses, misses } 69 */ 70enum perf_hw_cache_id { 71 PERF_COUNT_HW_CACHE_L1D = 0, 72 PERF_COUNT_HW_CACHE_L1I = 1, 73 PERF_COUNT_HW_CACHE_LL = 2, 74 PERF_COUNT_HW_CACHE_DTLB = 3, 75 PERF_COUNT_HW_CACHE_ITLB = 4, 76 PERF_COUNT_HW_CACHE_BPU = 5, 77 PERF_COUNT_HW_CACHE_NODE = 6, 78 79 PERF_COUNT_HW_CACHE_MAX, /* non-ABI */ 80}; 81 82enum perf_hw_cache_op_id { 83 PERF_COUNT_HW_CACHE_OP_READ = 0, 84 PERF_COUNT_HW_CACHE_OP_WRITE = 1, 85 PERF_COUNT_HW_CACHE_OP_PREFETCH = 2, 86 87 PERF_COUNT_HW_CACHE_OP_MAX, /* non-ABI */ 88}; 89 90enum perf_hw_cache_op_result_id { 91 PERF_COUNT_HW_CACHE_RESULT_ACCESS = 0, 92 PERF_COUNT_HW_CACHE_RESULT_MISS = 1, 93 94 PERF_COUNT_HW_CACHE_RESULT_MAX, /* non-ABI */ 95}; 96 97/* 98 * Special "software" events provided by the kernel, even if the hardware 99 * does not support performance events. These events measure various 100 * physical and sw events of the kernel (and allow the profiling of them as 101 * well): 102 */ 103enum perf_sw_ids { 104 PERF_COUNT_SW_CPU_CLOCK = 0, 105 PERF_COUNT_SW_TASK_CLOCK = 1, 106 PERF_COUNT_SW_PAGE_FAULTS = 2, 107 PERF_COUNT_SW_CONTEXT_SWITCHES = 3, 108 PERF_COUNT_SW_CPU_MIGRATIONS = 4, 109 PERF_COUNT_SW_PAGE_FAULTS_MIN = 5, 110 PERF_COUNT_SW_PAGE_FAULTS_MAJ = 6, 111 PERF_COUNT_SW_ALIGNMENT_FAULTS = 7, 112 PERF_COUNT_SW_EMULATION_FAULTS = 8, 113 PERF_COUNT_SW_DUMMY = 9, 114 PERF_COUNT_SW_BPF_OUTPUT = 10, 115 116 PERF_COUNT_SW_MAX, /* non-ABI */ 117}; 118 119/* 120 * Bits that can be set in attr.sample_type to request information 121 * in the overflow packets. 122 */ 123enum perf_event_sample_format { 124 PERF_SAMPLE_IP = 1U << 0, 125 PERF_SAMPLE_TID = 1U << 1, 126 PERF_SAMPLE_TIME = 1U << 2, 127 PERF_SAMPLE_ADDR = 1U << 3, 128 PERF_SAMPLE_READ = 1U << 4, 129 PERF_SAMPLE_CALLCHAIN = 1U << 5, 130 PERF_SAMPLE_ID = 1U << 6, 131 PERF_SAMPLE_CPU = 1U << 7, 132 PERF_SAMPLE_PERIOD = 1U << 8, 133 PERF_SAMPLE_STREAM_ID = 1U << 9, 134 PERF_SAMPLE_RAW = 1U << 10, 135 PERF_SAMPLE_BRANCH_STACK = 1U << 11, 136 PERF_SAMPLE_REGS_USER = 1U << 12, 137 PERF_SAMPLE_STACK_USER = 1U << 13, 138 PERF_SAMPLE_WEIGHT = 1U << 14, 139 PERF_SAMPLE_DATA_SRC = 1U << 15, 140 PERF_SAMPLE_IDENTIFIER = 1U << 16, 141 PERF_SAMPLE_TRANSACTION = 1U << 17, 142 PERF_SAMPLE_REGS_INTR = 1U << 18, 143 PERF_SAMPLE_PHYS_ADDR = 1U << 19, 144 145 PERF_SAMPLE_MAX = 1U << 20, /* non-ABI */ 146 147 __PERF_SAMPLE_CALLCHAIN_EARLY = 1ULL << 63, /* non-ABI; internal use */ 148}; 149 150/* 151 * values to program into branch_sample_type when PERF_SAMPLE_BRANCH is set 152 * 153 * If the user does not pass priv level information via branch_sample_type, 154 * the kernel uses the event's priv level. Branch and event priv levels do 155 * not have to match. Branch priv level is checked for permissions. 156 * 157 * The branch types can be combined, however BRANCH_ANY covers all types 158 * of branches and therefore it supersedes all the other types. 159 */ 160enum perf_branch_sample_type_shift { 161 PERF_SAMPLE_BRANCH_USER_SHIFT = 0, /* user branches */ 162 PERF_SAMPLE_BRANCH_KERNEL_SHIFT = 1, /* kernel branches */ 163 PERF_SAMPLE_BRANCH_HV_SHIFT = 2, /* hypervisor branches */ 164 165 PERF_SAMPLE_BRANCH_ANY_SHIFT = 3, /* any branch types */ 166 PERF_SAMPLE_BRANCH_ANY_CALL_SHIFT = 4, /* any call branch */ 167 PERF_SAMPLE_BRANCH_ANY_RETURN_SHIFT = 5, /* any return branch */ 168 PERF_SAMPLE_BRANCH_IND_CALL_SHIFT = 6, /* indirect calls */ 169 PERF_SAMPLE_BRANCH_ABORT_TX_SHIFT = 7, /* transaction aborts */ 170 PERF_SAMPLE_BRANCH_IN_TX_SHIFT = 8, /* in transaction */ 171 PERF_SAMPLE_BRANCH_NO_TX_SHIFT = 9, /* not in transaction */ 172 PERF_SAMPLE_BRANCH_COND_SHIFT = 10, /* conditional branches */ 173 174 PERF_SAMPLE_BRANCH_CALL_STACK_SHIFT = 11, /* call/ret stack */ 175 PERF_SAMPLE_BRANCH_IND_JUMP_SHIFT = 12, /* indirect jumps */ 176 PERF_SAMPLE_BRANCH_CALL_SHIFT = 13, /* direct call */ 177 178 PERF_SAMPLE_BRANCH_NO_FLAGS_SHIFT = 14, /* no flags */ 179 PERF_SAMPLE_BRANCH_NO_CYCLES_SHIFT = 15, /* no cycles */ 180 181 PERF_SAMPLE_BRANCH_TYPE_SAVE_SHIFT = 16, /* save branch type */ 182 183 PERF_SAMPLE_BRANCH_MAX_SHIFT /* non-ABI */ 184}; 185 186enum perf_branch_sample_type { 187 PERF_SAMPLE_BRANCH_USER = 1U << PERF_SAMPLE_BRANCH_USER_SHIFT, 188 PERF_SAMPLE_BRANCH_KERNEL = 1U << PERF_SAMPLE_BRANCH_KERNEL_SHIFT, 189 PERF_SAMPLE_BRANCH_HV = 1U << PERF_SAMPLE_BRANCH_HV_SHIFT, 190 191 PERF_SAMPLE_BRANCH_ANY = 1U << PERF_SAMPLE_BRANCH_ANY_SHIFT, 192 PERF_SAMPLE_BRANCH_ANY_CALL = 1U << PERF_SAMPLE_BRANCH_ANY_CALL_SHIFT, 193 PERF_SAMPLE_BRANCH_ANY_RETURN = 1U << PERF_SAMPLE_BRANCH_ANY_RETURN_SHIFT, 194 PERF_SAMPLE_BRANCH_IND_CALL = 1U << PERF_SAMPLE_BRANCH_IND_CALL_SHIFT, 195 PERF_SAMPLE_BRANCH_ABORT_TX = 1U << PERF_SAMPLE_BRANCH_ABORT_TX_SHIFT, 196 PERF_SAMPLE_BRANCH_IN_TX = 1U << PERF_SAMPLE_BRANCH_IN_TX_SHIFT, 197 PERF_SAMPLE_BRANCH_NO_TX = 1U << PERF_SAMPLE_BRANCH_NO_TX_SHIFT, 198 PERF_SAMPLE_BRANCH_COND = 1U << PERF_SAMPLE_BRANCH_COND_SHIFT, 199 200 PERF_SAMPLE_BRANCH_CALL_STACK = 1U << PERF_SAMPLE_BRANCH_CALL_STACK_SHIFT, 201 PERF_SAMPLE_BRANCH_IND_JUMP = 1U << PERF_SAMPLE_BRANCH_IND_JUMP_SHIFT, 202 PERF_SAMPLE_BRANCH_CALL = 1U << PERF_SAMPLE_BRANCH_CALL_SHIFT, 203 204 PERF_SAMPLE_BRANCH_NO_FLAGS = 1U << PERF_SAMPLE_BRANCH_NO_FLAGS_SHIFT, 205 PERF_SAMPLE_BRANCH_NO_CYCLES = 1U << PERF_SAMPLE_BRANCH_NO_CYCLES_SHIFT, 206 207 PERF_SAMPLE_BRANCH_TYPE_SAVE = 208 1U << PERF_SAMPLE_BRANCH_TYPE_SAVE_SHIFT, 209 210 PERF_SAMPLE_BRANCH_MAX = 1U << PERF_SAMPLE_BRANCH_MAX_SHIFT, 211}; 212 213/* 214 * Common flow change classification 215 */ 216enum { 217 PERF_BR_UNKNOWN = 0, /* unknown */ 218 PERF_BR_COND = 1, /* conditional */ 219 PERF_BR_UNCOND = 2, /* unconditional */ 220 PERF_BR_IND = 3, /* indirect */ 221 PERF_BR_CALL = 4, /* function call */ 222 PERF_BR_IND_CALL = 5, /* indirect function call */ 223 PERF_BR_RET = 6, /* function return */ 224 PERF_BR_SYSCALL = 7, /* syscall */ 225 PERF_BR_SYSRET = 8, /* syscall return */ 226 PERF_BR_COND_CALL = 9, /* conditional function call */ 227 PERF_BR_COND_RET = 10, /* conditional function return */ 228 PERF_BR_MAX, 229}; 230 231#define PERF_SAMPLE_BRANCH_PLM_ALL \ 232 (PERF_SAMPLE_BRANCH_USER|\ 233 PERF_SAMPLE_BRANCH_KERNEL|\ 234 PERF_SAMPLE_BRANCH_HV) 235 236/* 237 * Values to determine ABI of the registers dump. 238 */ 239enum perf_sample_regs_abi { 240 PERF_SAMPLE_REGS_ABI_NONE = 0, 241 PERF_SAMPLE_REGS_ABI_32 = 1, 242 PERF_SAMPLE_REGS_ABI_64 = 2, 243}; 244 245/* 246 * Values for the memory transaction event qualifier, mostly for 247 * abort events. Multiple bits can be set. 248 */ 249enum { 250 PERF_TXN_ELISION = (1 << 0), /* From elision */ 251 PERF_TXN_TRANSACTION = (1 << 1), /* From transaction */ 252 PERF_TXN_SYNC = (1 << 2), /* Instruction is related */ 253 PERF_TXN_ASYNC = (1 << 3), /* Instruction not related */ 254 PERF_TXN_RETRY = (1 << 4), /* Retry possible */ 255 PERF_TXN_CONFLICT = (1 << 5), /* Conflict abort */ 256 PERF_TXN_CAPACITY_WRITE = (1 << 6), /* Capacity write abort */ 257 PERF_TXN_CAPACITY_READ = (1 << 7), /* Capacity read abort */ 258 259 PERF_TXN_MAX = (1 << 8), /* non-ABI */ 260 261 /* bits 32..63 are reserved for the abort code */ 262 263 PERF_TXN_ABORT_MASK = (0xffffffffULL << 32), 264 PERF_TXN_ABORT_SHIFT = 32, 265}; 266 267/* 268 * The format of the data returned by read() on a perf event fd, 269 * as specified by attr.read_format: 270 * 271 * struct read_format { 272 * { u64 value; 273 * { u64 time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED 274 * { u64 time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING 275 * { u64 id; } && PERF_FORMAT_ID 276 * } && !PERF_FORMAT_GROUP 277 * 278 * { u64 nr; 279 * { u64 time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED 280 * { u64 time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING 281 * { u64 value; 282 * { u64 id; } && PERF_FORMAT_ID 283 * } cntr[nr]; 284 * } && PERF_FORMAT_GROUP 285 * }; 286 */ 287enum perf_event_read_format { 288 PERF_FORMAT_TOTAL_TIME_ENABLED = 1U << 0, 289 PERF_FORMAT_TOTAL_TIME_RUNNING = 1U << 1, 290 PERF_FORMAT_ID = 1U << 2, 291 PERF_FORMAT_GROUP = 1U << 3, 292 293 PERF_FORMAT_MAX = 1U << 4, /* non-ABI */ 294}; 295 296#define PERF_ATTR_SIZE_VER0 64 /* sizeof first published struct */ 297#define PERF_ATTR_SIZE_VER1 72 /* add: config2 */ 298#define PERF_ATTR_SIZE_VER2 80 /* add: branch_sample_type */ 299#define PERF_ATTR_SIZE_VER3 96 /* add: sample_regs_user */ 300 /* add: sample_stack_user */ 301#define PERF_ATTR_SIZE_VER4 104 /* add: sample_regs_intr */ 302#define PERF_ATTR_SIZE_VER5 112 /* add: aux_watermark */ 303 304/* 305 * Hardware event_id to monitor via a performance monitoring event: 306 * 307 * @sample_max_stack: Max number of frame pointers in a callchain, 308 * should be < /proc/sys/kernel/perf_event_max_stack 309 */ 310struct perf_event_attr { 311 312 /* 313 * Major type: hardware/software/tracepoint/etc. 314 */ 315 __u32 type; 316 317 /* 318 * Size of the attr structure, for fwd/bwd compat. 319 */ 320 __u32 size; 321 322 /* 323 * Type specific configuration information. 324 */ 325 __u64 config; 326 327 union { 328 __u64 sample_period; 329 __u64 sample_freq; 330 }; 331 332 __u64 sample_type; 333 __u64 read_format; 334 335 __u64 disabled : 1, /* off by default */ 336 inherit : 1, /* children inherit it */ 337 pinned : 1, /* must always be on PMU */ 338 exclusive : 1, /* only group on PMU */ 339 exclude_user : 1, /* don't count user */ 340 exclude_kernel : 1, /* ditto kernel */ 341 exclude_hv : 1, /* ditto hypervisor */ 342 exclude_idle : 1, /* don't count when idle */ 343 mmap : 1, /* include mmap data */ 344 comm : 1, /* include comm data */ 345 freq : 1, /* use freq, not period */ 346 inherit_stat : 1, /* per task counts */ 347 enable_on_exec : 1, /* next exec enables */ 348 task : 1, /* trace fork/exit */ 349 watermark : 1, /* wakeup_watermark */ 350 /* 351 * precise_ip: 352 * 353 * 0 - SAMPLE_IP can have arbitrary skid 354 * 1 - SAMPLE_IP must have constant skid 355 * 2 - SAMPLE_IP requested to have 0 skid 356 * 3 - SAMPLE_IP must have 0 skid 357 * 358 * See also PERF_RECORD_MISC_EXACT_IP 359 */ 360 precise_ip : 2, /* skid constraint */ 361 mmap_data : 1, /* non-exec mmap data */ 362 sample_id_all : 1, /* sample_type all events */ 363 364 exclude_host : 1, /* don't count in host */ 365 exclude_guest : 1, /* don't count in guest */ 366 367 exclude_callchain_kernel : 1, /* exclude kernel callchains */ 368 exclude_callchain_user : 1, /* exclude user callchains */ 369 mmap2 : 1, /* include mmap with inode data */ 370 comm_exec : 1, /* flag comm events that are due to an exec */ 371 use_clockid : 1, /* use @clockid for time fields */ 372 context_switch : 1, /* context switch data */ 373 write_backward : 1, /* Write ring buffer from end to beginning */ 374 namespaces : 1, /* include namespaces data */ 375 ksymbol : 1, /* include ksymbol events */ 376 bpf_event : 1, /* include bpf events */ 377 __reserved_1 : 33; 378 379 union { 380 __u32 wakeup_events; /* wakeup every n events */ 381 __u32 wakeup_watermark; /* bytes before wakeup */ 382 }; 383 384 __u32 bp_type; 385 union { 386 __u64 bp_addr; 387 __u64 kprobe_func; /* for perf_kprobe */ 388 __u64 uprobe_path; /* for perf_uprobe */ 389 __u64 config1; /* extension of config */ 390 }; 391 union { 392 __u64 bp_len; 393 __u64 kprobe_addr; /* when kprobe_func == NULL */ 394 __u64 probe_offset; /* for perf_[k,u]probe */ 395 __u64 config2; /* extension of config1 */ 396 }; 397 __u64 branch_sample_type; /* enum perf_branch_sample_type */ 398 399 /* 400 * Defines set of user regs to dump on samples. 401 * See asm/perf_regs.h for details. 402 */ 403 __u64 sample_regs_user; 404 405 /* 406 * Defines size of the user stack to dump on samples. 407 */ 408 __u32 sample_stack_user; 409 410 __s32 clockid; 411 /* 412 * Defines set of regs to dump for each sample 413 * state captured on: 414 * - precise = 0: PMU interrupt 415 * - precise > 0: sampled instruction 416 * 417 * See asm/perf_regs.h for details. 418 */ 419 __u64 sample_regs_intr; 420 421 /* 422 * Wakeup watermark for AUX area 423 */ 424 __u32 aux_watermark; 425 __u16 sample_max_stack; 426 __u16 __reserved_2; /* align to __u64 */ 427}; 428 429/* 430 * Structure used by below PERF_EVENT_IOC_QUERY_BPF command 431 * to query bpf programs attached to the same perf tracepoint 432 * as the given perf event. 433 */ 434struct perf_event_query_bpf { 435 /* 436 * The below ids array length 437 */ 438 __u32 ids_len; 439 /* 440 * Set by the kernel to indicate the number of 441 * available programs 442 */ 443 __u32 prog_cnt; 444 /* 445 * User provided buffer to store program ids 446 */ 447 __u32 ids[0]; 448}; 449 450/* 451 * Ioctls that can be done on a perf event fd: 452 */ 453#define PERF_EVENT_IOC_ENABLE _IO ('$', 0) 454#define PERF_EVENT_IOC_DISABLE _IO ('$', 1) 455#define PERF_EVENT_IOC_REFRESH _IO ('$', 2) 456#define PERF_EVENT_IOC_RESET _IO ('$', 3) 457#define PERF_EVENT_IOC_PERIOD _IOW('$', 4, __u64) 458#define PERF_EVENT_IOC_SET_OUTPUT _IO ('$', 5) 459#define PERF_EVENT_IOC_SET_FILTER _IOW('$', 6, char *) 460#define PERF_EVENT_IOC_ID _IOR('$', 7, __u64 *) 461#define PERF_EVENT_IOC_SET_BPF _IOW('$', 8, __u32) 462#define PERF_EVENT_IOC_PAUSE_OUTPUT _IOW('$', 9, __u32) 463#define PERF_EVENT_IOC_QUERY_BPF _IOWR('$', 10, struct perf_event_query_bpf *) 464#define PERF_EVENT_IOC_MODIFY_ATTRIBUTES _IOW('$', 11, struct perf_event_attr *) 465 466enum perf_event_ioc_flags { 467 PERF_IOC_FLAG_GROUP = 1U << 0, 468}; 469 470/* 471 * Structure of the page that can be mapped via mmap 472 */ 473struct perf_event_mmap_page { 474 __u32 version; /* version number of this structure */ 475 __u32 compat_version; /* lowest version this is compat with */ 476 477 /* 478 * Bits needed to read the hw events in user-space. 479 * 480 * u32 seq, time_mult, time_shift, index, width; 481 * u64 count, enabled, running; 482 * u64 cyc, time_offset; 483 * s64 pmc = 0; 484 * 485 * do { 486 * seq = pc->lock; 487 * barrier() 488 * 489 * enabled = pc->time_enabled; 490 * running = pc->time_running; 491 * 492 * if (pc->cap_usr_time && enabled != running) { 493 * cyc = rdtsc(); 494 * time_offset = pc->time_offset; 495 * time_mult = pc->time_mult; 496 * time_shift = pc->time_shift; 497 * } 498 * 499 * index = pc->index; 500 * count = pc->offset; 501 * if (pc->cap_user_rdpmc && index) { 502 * width = pc->pmc_width; 503 * pmc = rdpmc(index - 1); 504 * } 505 * 506 * barrier(); 507 * } while (pc->lock != seq); 508 * 509 * NOTE: for obvious reason this only works on self-monitoring 510 * processes. 511 */ 512 __u32 lock; /* seqlock for synchronization */ 513 __u32 index; /* hardware event identifier */ 514 __s64 offset; /* add to hardware event value */ 515 __u64 time_enabled; /* time event active */ 516 __u64 time_running; /* time event on cpu */ 517 union { 518 __u64 capabilities; 519 struct { 520 __u64 cap_bit0 : 1, /* Always 0, deprecated, see commit 860f085b74e9 */ 521 cap_bit0_is_deprecated : 1, /* Always 1, signals that bit 0 is zero */ 522 523 cap_user_rdpmc : 1, /* The RDPMC instruction can be used to read counts */ 524 cap_user_time : 1, /* The time_* fields are used */ 525 cap_user_time_zero : 1, /* The time_zero field is used */ 526 cap_____res : 59; 527 }; 528 }; 529 530 /* 531 * If cap_user_rdpmc this field provides the bit-width of the value 532 * read using the rdpmc() or equivalent instruction. This can be used 533 * to sign extend the result like: 534 * 535 * pmc <<= 64 - width; 536 * pmc >>= 64 - width; // signed shift right 537 * count += pmc; 538 */ 539 __u16 pmc_width; 540 541 /* 542 * If cap_usr_time the below fields can be used to compute the time 543 * delta since time_enabled (in ns) using rdtsc or similar. 544 * 545 * u64 quot, rem; 546 * u64 delta; 547 * 548 * quot = (cyc >> time_shift); 549 * rem = cyc & (((u64)1 << time_shift) - 1); 550 * delta = time_offset + quot * time_mult + 551 * ((rem * time_mult) >> time_shift); 552 * 553 * Where time_offset,time_mult,time_shift and cyc are read in the 554 * seqcount loop described above. This delta can then be added to 555 * enabled and possible running (if index), improving the scaling: 556 * 557 * enabled += delta; 558 * if (index) 559 * running += delta; 560 * 561 * quot = count / running; 562 * rem = count % running; 563 * count = quot * enabled + (rem * enabled) / running; 564 */ 565 __u16 time_shift; 566 __u32 time_mult; 567 __u64 time_offset; 568 /* 569 * If cap_usr_time_zero, the hardware clock (e.g. TSC) can be calculated 570 * from sample timestamps. 571 * 572 * time = timestamp - time_zero; 573 * quot = time / time_mult; 574 * rem = time % time_mult; 575 * cyc = (quot << time_shift) + (rem << time_shift) / time_mult; 576 * 577 * And vice versa: 578 * 579 * quot = cyc >> time_shift; 580 * rem = cyc & (((u64)1 << time_shift) - 1); 581 * timestamp = time_zero + quot * time_mult + 582 * ((rem * time_mult) >> time_shift); 583 */ 584 __u64 time_zero; 585 __u32 size; /* Header size up to __reserved[] fields. */ 586 587 /* 588 * Hole for extension of the self monitor capabilities 589 */ 590 591 __u8 __reserved[118*8+4]; /* align to 1k. */ 592 593 /* 594 * Control data for the mmap() data buffer. 595 * 596 * User-space reading the @data_head value should issue an smp_rmb(), 597 * after reading this value. 598 * 599 * When the mapping is PROT_WRITE the @data_tail value should be 600 * written by userspace to reflect the last read data, after issueing 601 * an smp_mb() to separate the data read from the ->data_tail store. 602 * In this case the kernel will not over-write unread data. 603 * 604 * See perf_output_put_handle() for the data ordering. 605 * 606 * data_{offset,size} indicate the location and size of the perf record 607 * buffer within the mmapped area. 608 */ 609 __u64 data_head; /* head in the data section */ 610 __u64 data_tail; /* user-space written tail */ 611 __u64 data_offset; /* where the buffer starts */ 612 __u64 data_size; /* data buffer size */ 613 614 /* 615 * AUX area is defined by aux_{offset,size} fields that should be set 616 * by the userspace, so that 617 * 618 * aux_offset >= data_offset + data_size 619 * 620 * prior to mmap()ing it. Size of the mmap()ed area should be aux_size. 621 * 622 * Ring buffer pointers aux_{head,tail} have the same semantics as 623 * data_{head,tail} and same ordering rules apply. 624 */ 625 __u64 aux_head; 626 __u64 aux_tail; 627 __u64 aux_offset; 628 __u64 aux_size; 629}; 630 631#define PERF_RECORD_MISC_CPUMODE_MASK (7 << 0) 632#define PERF_RECORD_MISC_CPUMODE_UNKNOWN (0 << 0) 633#define PERF_RECORD_MISC_KERNEL (1 << 0) 634#define PERF_RECORD_MISC_USER (2 << 0) 635#define PERF_RECORD_MISC_HYPERVISOR (3 << 0) 636#define PERF_RECORD_MISC_GUEST_KERNEL (4 << 0) 637#define PERF_RECORD_MISC_GUEST_USER (5 << 0) 638 639/* 640 * Indicates that /proc/PID/maps parsing are truncated by time out. 641 */ 642#define PERF_RECORD_MISC_PROC_MAP_PARSE_TIMEOUT (1 << 12) 643/* 644 * Following PERF_RECORD_MISC_* are used on different 645 * events, so can reuse the same bit position: 646 * 647 * PERF_RECORD_MISC_MMAP_DATA - PERF_RECORD_MMAP* events 648 * PERF_RECORD_MISC_COMM_EXEC - PERF_RECORD_COMM event 649 * PERF_RECORD_MISC_FORK_EXEC - PERF_RECORD_FORK event (perf internal) 650 * PERF_RECORD_MISC_SWITCH_OUT - PERF_RECORD_SWITCH* events 651 */ 652#define PERF_RECORD_MISC_MMAP_DATA (1 << 13) 653#define PERF_RECORD_MISC_COMM_EXEC (1 << 13) 654#define PERF_RECORD_MISC_FORK_EXEC (1 << 13) 655#define PERF_RECORD_MISC_SWITCH_OUT (1 << 13) 656/* 657 * These PERF_RECORD_MISC_* flags below are safely reused 658 * for the following events: 659 * 660 * PERF_RECORD_MISC_EXACT_IP - PERF_RECORD_SAMPLE of precise events 661 * PERF_RECORD_MISC_SWITCH_OUT_PREEMPT - PERF_RECORD_SWITCH* events 662 * 663 * 664 * PERF_RECORD_MISC_EXACT_IP: 665 * Indicates that the content of PERF_SAMPLE_IP points to 666 * the actual instruction that triggered the event. See also 667 * perf_event_attr::precise_ip. 668 * 669 * PERF_RECORD_MISC_SWITCH_OUT_PREEMPT: 670 * Indicates that thread was preempted in TASK_RUNNING state. 671 */ 672#define PERF_RECORD_MISC_EXACT_IP (1 << 14) 673#define PERF_RECORD_MISC_SWITCH_OUT_PREEMPT (1 << 14) 674/* 675 * Reserve the last bit to indicate some extended misc field 676 */ 677#define PERF_RECORD_MISC_EXT_RESERVED (1 << 15) 678 679struct perf_event_header { 680 __u32 type; 681 __u16 misc; 682 __u16 size; 683}; 684 685struct perf_ns_link_info { 686 __u64 dev; 687 __u64 ino; 688}; 689 690enum { 691 NET_NS_INDEX = 0, 692 UTS_NS_INDEX = 1, 693 IPC_NS_INDEX = 2, 694 PID_NS_INDEX = 3, 695 USER_NS_INDEX = 4, 696 MNT_NS_INDEX = 5, 697 CGROUP_NS_INDEX = 6, 698 699 NR_NAMESPACES, /* number of available namespaces */ 700}; 701 702enum perf_event_type { 703 704 /* 705 * If perf_event_attr.sample_id_all is set then all event types will 706 * have the sample_type selected fields related to where/when 707 * (identity) an event took place (TID, TIME, ID, STREAM_ID, CPU, 708 * IDENTIFIER) described in PERF_RECORD_SAMPLE below, it will be stashed 709 * just after the perf_event_header and the fields already present for 710 * the existing fields, i.e. at the end of the payload. That way a newer 711 * perf.data file will be supported by older perf tools, with these new 712 * optional fields being ignored. 713 * 714 * struct sample_id { 715 * { u32 pid, tid; } && PERF_SAMPLE_TID 716 * { u64 time; } && PERF_SAMPLE_TIME 717 * { u64 id; } && PERF_SAMPLE_ID 718 * { u64 stream_id;} && PERF_SAMPLE_STREAM_ID 719 * { u32 cpu, res; } && PERF_SAMPLE_CPU 720 * { u64 id; } && PERF_SAMPLE_IDENTIFIER 721 * } && perf_event_attr::sample_id_all 722 * 723 * Note that PERF_SAMPLE_IDENTIFIER duplicates PERF_SAMPLE_ID. The 724 * advantage of PERF_SAMPLE_IDENTIFIER is that its position is fixed 725 * relative to header.size. 726 */ 727 728 /* 729 * The MMAP events record the PROT_EXEC mappings so that we can 730 * correlate userspace IPs to code. They have the following structure: 731 * 732 * struct { 733 * struct perf_event_header header; 734 * 735 * u32 pid, tid; 736 * u64 addr; 737 * u64 len; 738 * u64 pgoff; 739 * char filename[]; 740 * struct sample_id sample_id; 741 * }; 742 */ 743 PERF_RECORD_MMAP = 1, 744 745 /* 746 * struct { 747 * struct perf_event_header header; 748 * u64 id; 749 * u64 lost; 750 * struct sample_id sample_id; 751 * }; 752 */ 753 PERF_RECORD_LOST = 2, 754 755 /* 756 * struct { 757 * struct perf_event_header header; 758 * 759 * u32 pid, tid; 760 * char comm[]; 761 * struct sample_id sample_id; 762 * }; 763 */ 764 PERF_RECORD_COMM = 3, 765 766 /* 767 * struct { 768 * struct perf_event_header header; 769 * u32 pid, ppid; 770 * u32 tid, ptid; 771 * u64 time; 772 * struct sample_id sample_id; 773 * }; 774 */ 775 PERF_RECORD_EXIT = 4, 776 777 /* 778 * struct { 779 * struct perf_event_header header; 780 * u64 time; 781 * u64 id; 782 * u64 stream_id; 783 * struct sample_id sample_id; 784 * }; 785 */ 786 PERF_RECORD_THROTTLE = 5, 787 PERF_RECORD_UNTHROTTLE = 6, 788 789 /* 790 * struct { 791 * struct perf_event_header header; 792 * u32 pid, ppid; 793 * u32 tid, ptid; 794 * u64 time; 795 * struct sample_id sample_id; 796 * }; 797 */ 798 PERF_RECORD_FORK = 7, 799 800 /* 801 * struct { 802 * struct perf_event_header header; 803 * u32 pid, tid; 804 * 805 * struct read_format values; 806 * struct sample_id sample_id; 807 * }; 808 */ 809 PERF_RECORD_READ = 8, 810 811 /* 812 * struct { 813 * struct perf_event_header header; 814 * 815 * # 816 * # Note that PERF_SAMPLE_IDENTIFIER duplicates PERF_SAMPLE_ID. 817 * # The advantage of PERF_SAMPLE_IDENTIFIER is that its position 818 * # is fixed relative to header. 819 * # 820 * 821 * { u64 id; } && PERF_SAMPLE_IDENTIFIER 822 * { u64 ip; } && PERF_SAMPLE_IP 823 * { u32 pid, tid; } && PERF_SAMPLE_TID 824 * { u64 time; } && PERF_SAMPLE_TIME 825 * { u64 addr; } && PERF_SAMPLE_ADDR 826 * { u64 id; } && PERF_SAMPLE_ID 827 * { u64 stream_id;} && PERF_SAMPLE_STREAM_ID 828 * { u32 cpu, res; } && PERF_SAMPLE_CPU 829 * { u64 period; } && PERF_SAMPLE_PERIOD 830 * 831 * { struct read_format values; } && PERF_SAMPLE_READ 832 * 833 * { u64 nr, 834 * u64 ips[nr]; } && PERF_SAMPLE_CALLCHAIN 835 * 836 * # 837 * # The RAW record below is opaque data wrt the ABI 838 * # 839 * # That is, the ABI doesn't make any promises wrt to 840 * # the stability of its content, it may vary depending 841 * # on event, hardware, kernel version and phase of 842 * # the moon. 843 * # 844 * # In other words, PERF_SAMPLE_RAW contents are not an ABI. 845 * # 846 * 847 * { u32 size; 848 * char data[size];}&& PERF_SAMPLE_RAW 849 * 850 * { u64 nr; 851 * { u64 from, to, flags } lbr[nr];} && PERF_SAMPLE_BRANCH_STACK 852 * 853 * { u64 abi; # enum perf_sample_regs_abi 854 * u64 regs[weight(mask)]; } && PERF_SAMPLE_REGS_USER 855 * 856 * { u64 size; 857 * char data[size]; 858 * u64 dyn_size; } && PERF_SAMPLE_STACK_USER 859 * 860 * { u64 weight; } && PERF_SAMPLE_WEIGHT 861 * { u64 data_src; } && PERF_SAMPLE_DATA_SRC 862 * { u64 transaction; } && PERF_SAMPLE_TRANSACTION 863 * { u64 abi; # enum perf_sample_regs_abi 864 * u64 regs[weight(mask)]; } && PERF_SAMPLE_REGS_INTR 865 * { u64 phys_addr;} && PERF_SAMPLE_PHYS_ADDR 866 * }; 867 */ 868 PERF_RECORD_SAMPLE = 9, 869 870 /* 871 * The MMAP2 records are an augmented version of MMAP, they add 872 * maj, min, ino numbers to be used to uniquely identify each mapping 873 * 874 * struct { 875 * struct perf_event_header header; 876 * 877 * u32 pid, tid; 878 * u64 addr; 879 * u64 len; 880 * u64 pgoff; 881 * u32 maj; 882 * u32 min; 883 * u64 ino; 884 * u64 ino_generation; 885 * u32 prot, flags; 886 * char filename[]; 887 * struct sample_id sample_id; 888 * }; 889 */ 890 PERF_RECORD_MMAP2 = 10, 891 892 /* 893 * Records that new data landed in the AUX buffer part. 894 * 895 * struct { 896 * struct perf_event_header header; 897 * 898 * u64 aux_offset; 899 * u64 aux_size; 900 * u64 flags; 901 * struct sample_id sample_id; 902 * }; 903 */ 904 PERF_RECORD_AUX = 11, 905 906 /* 907 * Indicates that instruction trace has started 908 * 909 * struct { 910 * struct perf_event_header header; 911 * u32 pid; 912 * u32 tid; 913 * struct sample_id sample_id; 914 * }; 915 */ 916 PERF_RECORD_ITRACE_START = 12, 917 918 /* 919 * Records the dropped/lost sample number. 920 * 921 * struct { 922 * struct perf_event_header header; 923 * 924 * u64 lost; 925 * struct sample_id sample_id; 926 * }; 927 */ 928 PERF_RECORD_LOST_SAMPLES = 13, 929 930 /* 931 * Records a context switch in or out (flagged by 932 * PERF_RECORD_MISC_SWITCH_OUT). See also 933 * PERF_RECORD_SWITCH_CPU_WIDE. 934 * 935 * struct { 936 * struct perf_event_header header; 937 * struct sample_id sample_id; 938 * }; 939 */ 940 PERF_RECORD_SWITCH = 14, 941 942 /* 943 * CPU-wide version of PERF_RECORD_SWITCH with next_prev_pid and 944 * next_prev_tid that are the next (switching out) or previous 945 * (switching in) pid/tid. 946 * 947 * struct { 948 * struct perf_event_header header; 949 * u32 next_prev_pid; 950 * u32 next_prev_tid; 951 * struct sample_id sample_id; 952 * }; 953 */ 954 PERF_RECORD_SWITCH_CPU_WIDE = 15, 955 956 /* 957 * struct { 958 * struct perf_event_header header; 959 * u32 pid; 960 * u32 tid; 961 * u64 nr_namespaces; 962 * { u64 dev, inode; } [nr_namespaces]; 963 * struct sample_id sample_id; 964 * }; 965 */ 966 PERF_RECORD_NAMESPACES = 16, 967 968 /* 969 * Record ksymbol register/unregister events: 970 * 971 * struct { 972 * struct perf_event_header header; 973 * u64 addr; 974 * u32 len; 975 * u16 ksym_type; 976 * u16 flags; 977 * char name[]; 978 * struct sample_id sample_id; 979 * }; 980 */ 981 PERF_RECORD_KSYMBOL = 17, 982 983 /* 984 * Record bpf events: 985 * enum perf_bpf_event_type { 986 * PERF_BPF_EVENT_UNKNOWN = 0, 987 * PERF_BPF_EVENT_PROG_LOAD = 1, 988 * PERF_BPF_EVENT_PROG_UNLOAD = 2, 989 * }; 990 * 991 * struct { 992 * struct perf_event_header header; 993 * u16 type; 994 * u16 flags; 995 * u32 id; 996 * u8 tag[BPF_TAG_SIZE]; 997 * struct sample_id sample_id; 998 * }; 999 */ 1000 PERF_RECORD_BPF_EVENT = 18,
1001 1002 PERF_RECORD_MAX, /* non-ABI */ 1003}; 1004 1005enum perf_record_ksymbol_type { 1006 PERF_RECORD_KSYMBOL_TYPE_UNKNOWN = 0, 1007 PERF_RECORD_KSYMBOL_TYPE_BPF = 1, 1008 PERF_RECORD_KSYMBOL_TYPE_MAX /* non-ABI */ 1009}; 1010 1011#define PERF_RECORD_KSYMBOL_FLAGS_UNREGISTER (1 << 0) 1012 1013enum perf_bpf_event_type { 1014 PERF_BPF_EVENT_UNKNOWN = 0, 1015 PERF_BPF_EVENT_PROG_LOAD = 1, 1016 PERF_BPF_EVENT_PROG_UNLOAD = 2, 1017 PERF_BPF_EVENT_MAX, /* non-ABI */ 1018}; 1019 1020#define PERF_MAX_STACK_DEPTH 127 1021#define PERF_MAX_CONTEXTS_PER_STACK 8 1022 1023enum perf_callchain_context { 1024 PERF_CONTEXT_HV = (__u64)-32, 1025 PERF_CONTEXT_KERNEL = (__u64)-128, 1026 PERF_CONTEXT_USER = (__u64)-512, 1027 1028 PERF_CONTEXT_GUEST = (__u64)-2048, 1029 PERF_CONTEXT_GUEST_KERNEL = (__u64)-2176, 1030 PERF_CONTEXT_GUEST_USER = (__u64)-2560, 1031 1032 PERF_CONTEXT_MAX = (__u64)-4095, 1033}; 1034 1035/** 1036 * PERF_RECORD_AUX::flags bits 1037 */ 1038#define PERF_AUX_FLAG_TRUNCATED 0x01 /* record was truncated to fit */ 1039#define PERF_AUX_FLAG_OVERWRITE 0x02 /* snapshot from overwrite mode */ 1040#define PERF_AUX_FLAG_PARTIAL 0x04 /* record contains gaps */ 1041#define PERF_AUX_FLAG_COLLISION 0x08 /* sample collided with another */ 1042 1043#define PERF_FLAG_FD_NO_GROUP (1UL << 0) 1044#define PERF_FLAG_FD_OUTPUT (1UL << 1) 1045#define PERF_FLAG_PID_CGROUP (1UL << 2) /* pid=cgroup id, per-cpu mode only */ 1046#define PERF_FLAG_FD_CLOEXEC (1UL << 3) /* O_CLOEXEC */ 1047 1048#if defined(__LITTLE_ENDIAN_BITFIELD) 1049union perf_mem_data_src { 1050 __u64 val; 1051 struct { 1052 __u64 mem_op:5, /* type of opcode */ 1053 mem_lvl:14, /* memory hierarchy level */ 1054 mem_snoop:5, /* snoop mode */ 1055 mem_lock:2, /* lock instr */ 1056 mem_dtlb:7, /* tlb access */ 1057 mem_lvl_num:4, /* memory hierarchy level number */ 1058 mem_remote:1, /* remote */ 1059 mem_snoopx:2, /* snoop mode, ext */ 1060 mem_rsvd:24; 1061 }; 1062}; 1063#elif defined(__BIG_ENDIAN_BITFIELD) 1064union perf_mem_data_src { 1065 __u64 val; 1066 struct { 1067 __u64 mem_rsvd:24, 1068 mem_snoopx:2, /* snoop mode, ext */ 1069 mem_remote:1, /* remote */ 1070 mem_lvl_num:4, /* memory hierarchy level number */ 1071 mem_dtlb:7, /* tlb access */ 1072 mem_lock:2, /* lock instr */ 1073 mem_snoop:5, /* snoop mode */ 1074 mem_lvl:14, /* memory hierarchy level */ 1075 mem_op:5; /* type of opcode */ 1076 }; 1077}; 1078#else 1079#error "Unknown endianness" 1080#endif 1081 1082/* type of opcode (load/store/prefetch,code) */ 1083#define PERF_MEM_OP_NA 0x01 /* not available */ 1084#define PERF_MEM_OP_LOAD 0x02 /* load instruction */ 1085#define PERF_MEM_OP_STORE 0x04 /* store instruction */ 1086#define PERF_MEM_OP_PFETCH 0x08 /* prefetch */ 1087#define PERF_MEM_OP_EXEC 0x10 /* code (execution) */ 1088#define PERF_MEM_OP_SHIFT 0 1089 1090/* memory hierarchy (memory level, hit or miss) */ 1091#define PERF_MEM_LVL_NA 0x01 /* not available */ 1092#define PERF_MEM_LVL_HIT 0x02 /* hit level */ 1093#define PERF_MEM_LVL_MISS 0x04 /* miss level */ 1094#define PERF_MEM_LVL_L1 0x08 /* L1 */ 1095#define PERF_MEM_LVL_LFB 0x10 /* Line Fill Buffer */ 1096#define PERF_MEM_LVL_L2 0x20 /* L2 */ 1097#define PERF_MEM_LVL_L3 0x40 /* L3 */ 1098#define PERF_MEM_LVL_LOC_RAM 0x80 /* Local DRAM */ 1099#define PERF_MEM_LVL_REM_RAM1 0x100 /* Remote DRAM (1 hop) */ 1100#define PERF_MEM_LVL_REM_RAM2 0x200 /* Remote DRAM (2 hops) */ 1101#define PERF_MEM_LVL_REM_CCE1 0x400 /* Remote Cache (1 hop) */ 1102#define PERF_MEM_LVL_REM_CCE2 0x800 /* Remote Cache (2 hops) */ 1103#define PERF_MEM_LVL_IO 0x1000 /* I/O memory */ 1104#define PERF_MEM_LVL_UNC 0x2000 /* Uncached memory */ 1105#define PERF_MEM_LVL_SHIFT 5 1106 1107#define PERF_MEM_REMOTE_REMOTE 0x01 /* Remote */ 1108#define PERF_MEM_REMOTE_SHIFT 37 1109 1110#define PERF_MEM_LVLNUM_L1 0x01 /* L1 */ 1111#define PERF_MEM_LVLNUM_L2 0x02 /* L2 */ 1112#define PERF_MEM_LVLNUM_L3 0x03 /* L3 */ 1113#define PERF_MEM_LVLNUM_L4 0x04 /* L4 */ 1114/* 5-0xa available */ 1115#define PERF_MEM_LVLNUM_ANY_CACHE 0x0b /* Any cache */ 1116#define PERF_MEM_LVLNUM_LFB 0x0c /* LFB */ 1117#define PERF_MEM_LVLNUM_RAM 0x0d /* RAM */ 1118#define PERF_MEM_LVLNUM_PMEM 0x0e /* PMEM */ 1119#define PERF_MEM_LVLNUM_NA 0x0f /* N/A */ 1120 1121#define PERF_MEM_LVLNUM_SHIFT 33 1122 1123/* snoop mode */ 1124#define PERF_MEM_SNOOP_NA 0x01 /* not available */ 1125#define PERF_MEM_SNOOP_NONE 0x02 /* no snoop */ 1126#define PERF_MEM_SNOOP_HIT 0x04 /* snoop hit */ 1127#define PERF_MEM_SNOOP_MISS 0x08 /* snoop miss */ 1128#define PERF_MEM_SNOOP_HITM 0x10 /* snoop hit modified */ 1129#define PERF_MEM_SNOOP_SHIFT 19 1130 1131#define PERF_MEM_SNOOPX_FWD 0x01 /* forward */ 1132/* 1 free */ 1133#define PERF_MEM_SNOOPX_SHIFT 37 1134 1135/* locked instruction */ 1136#define PERF_MEM_LOCK_NA 0x01 /* not available */ 1137#define PERF_MEM_LOCK_LOCKED 0x02 /* locked transaction */ 1138#define PERF_MEM_LOCK_SHIFT 24 1139 1140/* TLB access */ 1141#define PERF_MEM_TLB_NA 0x01 /* not available */ 1142#define PERF_MEM_TLB_HIT 0x02 /* hit level */ 1143#define PERF_MEM_TLB_MISS 0x04 /* miss level */ 1144#define PERF_MEM_TLB_L1 0x08 /* L1 */ 1145#define PERF_MEM_TLB_L2 0x10 /* L2 */ 1146#define PERF_MEM_TLB_WK 0x20 /* Hardware Walker*/ 1147#define PERF_MEM_TLB_OS 0x40 /* OS fault handler */ 1148#define PERF_MEM_TLB_SHIFT 26 1149 1150#define PERF_MEM_S(a, s) \ 1151 (((__u64)PERF_MEM_##a##_##s) << PERF_MEM_##a##_SHIFT) 1152 1153/* 1154 * single taken branch record layout: 1155 * 1156 * from: source instruction (may not always be a branch insn) 1157 * to: branch target 1158 * mispred: branch target was mispredicted 1159 * predicted: branch target was predicted 1160 * 1161 * support for mispred, predicted is optional. In case it 1162 * is not supported mispred = predicted = 0. 1163 * 1164 * in_tx: running in a hardware transaction 1165 * abort: aborting a hardware transaction 1166 * cycles: cycles from last branch (or 0 if not supported) 1167 * type: branch type 1168 */ 1169struct perf_branch_entry { 1170 __u64 from; 1171 __u64 to; 1172 __u64 mispred:1, /* target mispredicted */ 1173 predicted:1,/* target predicted */ 1174 in_tx:1, /* in transaction */ 1175 abort:1, /* transaction abort */ 1176 cycles:16, /* cycle count to last branch */ 1177 type:4, /* branch type */ 1178 reserved:40; 1179}; 1180 1181#endif /* _UAPI_LINUX_PERF_EVENT_H */ 1182