// SPDX-License-Identifier: GPL-2.0
/*
 * arch/sh/kernel/cpu/irq/intc-sh5.c
 *
 * Interrupt Controller support for SH5 INTC.
 *
 * Copyright (C) 2000, 2001  Paolo Alberelli
 * Copyright (C) 2003  Paul Mundt
 *
 * Per-interrupt selective. IRLM=0 (Fixed priority) is not
 * supported being useless without a cascaded interrupt
 * controller.
 */
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/bitops.h>
#include <cpu/irq.h>
#include <asm/page.h>

/*
 * Maybe the generic Peripheral block could move to a more
 * generic include file. INTC Block will be defined here
 * and only here to make INTC self-contained in a single
 * file.
 */
#define INTC_BLOCK_OFFSET       0x01000000

/* Base */
#define INTC_BASE               PHYS_PERIPHERAL_BLOCK + \
                                INTC_BLOCK_OFFSET

/* Address */
#define INTC_ICR_SET            (intc_virt + 0x0)
#define INTC_ICR_CLEAR          (intc_virt + 0x8)
#define INTC_INTPRI_0           (intc_virt + 0x10)
#define INTC_INTSRC_0           (intc_virt + 0x50)
#define INTC_INTSRC_1           (intc_virt + 0x58)
#define INTC_INTREQ_0           (intc_virt + 0x60)
#define INTC_INTREQ_1           (intc_virt + 0x68)
#define INTC_INTENB_0           (intc_virt + 0x70)
#define INTC_INTENB_1           (intc_virt + 0x78)
#define INTC_INTDSB_0           (intc_virt + 0x80)
#define INTC_INTDSB_1           (intc_virt + 0x88)

#define INTC_ICR_IRLM           0x1
#define INTC_INTPRI_PREGS       8               /* 8 Priority Registers */
#define INTC_INTPRI_PPREG       8               /* 8 Priorities per Register */


/*
 * Mapper between the vector ordinal and the IRQ number
 * passed to kernel/device drivers.
 */
int intc_evt_to_irq[(0xE20/0x20)+1] = {
        -1, -1, -1, -1, -1, -1, -1, -1, /* 0x000 - 0x0E0 */
        -1, -1, -1, -1, -1, -1, -1, -1, /* 0x100 - 0x1E0 */
         0,  0,  0,  0,  0,  1,  0,  0, /* 0x200 - 0x2E0 */
         2,  0,  0,  3,  0,  0,  0, -1, /* 0x300 - 0x3E0 */
        32, 33, 34, 35, 36, 37, 38, -1, /* 0x400 - 0x4E0 */
        -1, -1, -1, 63, -1, -1, -1, -1, /* 0x500 - 0x5E0 */
        -1, -1, 18, 19, 20, 21, 22, -1, /* 0x600 - 0x6E0 */
        39, 40, 41, 42, -1, -1, -1, -1, /* 0x700 - 0x7E0 */
         4,  5,  6,  7, -1, -1, -1, -1, /* 0x800 - 0x8E0 */
        -1, -1, -1, -1, -1, -1, -1, -1, /* 0x900 - 0x9E0 */
        12, 13, 14, 15, 16, 17, -1, -1, /* 0xA00 - 0xAE0 */
        -1, -1, -1, -1, -1, -1, -1, -1, /* 0xB00 - 0xBE0 */
        -1, -1, -1, -1, -1, -1, -1, -1, /* 0xC00 - 0xCE0 */
        -1, -1, -1, -1, -1, -1, -1, -1, /* 0xD00 - 0xDE0 */
        -1, -1                          /* 0xE00 - 0xE20 */
};

static unsigned long intc_virt;
static int irlm;                /* IRL mode */

static void enable_intc_irq(struct irq_data *data)
{
        unsigned int irq = data->irq;
        unsigned long reg;
        unsigned long bitmask;

        if ((irq <= IRQ_IRL3) && (irlm == NO_PRIORITY))
                printk("Trying to use straight IRL0-3 with an encoding platform.\n");

        if (irq < 32) {
                reg = INTC_INTENB_0;
                bitmask = 1 << irq;
        } else {
                reg = INTC_INTENB_1;
                bitmask = 1 << (irq - 32);
        }

        __raw_writel(bitmask, reg);
}

static void disable_intc_irq(struct irq_data *data)
{
        unsigned int irq = data->irq;
        unsigned long reg;
        unsigned long bitmask;

        if (irq < 32) {
                reg = INTC_INTDSB_0;
                bitmask = 1 << irq;
        } else {
                reg = INTC_INTDSB_1;
                bitmask = 1 << (irq - 32);
        }

        __raw_writel(bitmask, reg);
}

static struct irq_chip intc_irq_type = {
        .name = "INTC",
        .irq_enable = enable_intc_irq,
        .irq_disable = disable_intc_irq,
};

void __init plat_irq_setup(void)
{
        unsigned long long __dummy0, __dummy1=~0x00000000100000f0;
        unsigned long reg;
        int i;

        intc_virt = (unsigned long)ioremap_nocache(INTC_BASE, 1024);
        if (!intc_virt) {
                panic("Unable to remap INTC\n");
        }


        /* Set default: per-line enable/disable, priority driven ack/eoi */
        for (i = 0; i < NR_INTC_IRQS; i++)
                irq_set_chip_and_handler(i, &intc_irq_type, handle_level_irq);


        /* Disable all interrupts and set all priorities to 0 to avoid trouble */
        __raw_writel(-1, INTC_INTDSB_0);
        __raw_writel(-1, INTC_INTDSB_1);

        for (reg = INTC_INTPRI_0, i = 0; i < INTC_INTPRI_PREGS; i++, reg += 8)
                __raw_writel( NO_PRIORITY, reg);


#ifdef CONFIG_SH_CAYMAN
        {
                unsigned long data;

                /* Set IRLM */
                /* If all the priorities are set to 'no priority', then
                 * assume we are using encoded mode.
                 */
                irlm = platform_int_priority[IRQ_IRL0] +
                       platform_int_priority[IRQ_IRL1] +
                       platform_int_priority[IRQ_IRL2] +
                       platform_int_priority[IRQ_IRL3];
                if (irlm == NO_PRIORITY) {
                        /* IRLM = 0 */
                        reg = INTC_ICR_CLEAR;
                        i = IRQ_INTA;
                        printk("Trying to use encoded IRL0-3. IRLs unsupported.\n");
                } else {
                        /* IRLM = 1 */
                        reg = INTC_ICR_SET;
                        i = IRQ_IRL0;
                }
                __raw_writel(INTC_ICR_IRLM, reg);

                /* Set interrupt priorities according to platform description */
                for (data = 0, reg = INTC_INTPRI_0; i < NR_INTC_IRQS; i++) {
                        data |= platform_int_priority[i] <<
                                ((i % INTC_INTPRI_PPREG) * 4);
                        if ((i % INTC_INTPRI_PPREG) == (INTC_INTPRI_PPREG - 1)) {
                                /* Upon the 7th, set Priority Register */
                                __raw_writel(data, reg);
                                data = 0;
                                reg += 8;
                        }
                }
        }
#endif

        /*
         * And now let interrupts come in.
         * sti() is not enough, we need to
         * lower priority, too.
         */
        __asm__ __volatile__("getcon    " __SR ", %0\n\t"
                             "and       %0, %1, %0\n\t"
                             "putcon    %0, " __SR "\n\t"
                             : "=&r" (__dummy0)
                             : "r" (__dummy1));
}