linux/drivers/hwmon/pmbus/adm1275.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-or-later
   2/*
   3 * Hardware monitoring driver for Analog Devices ADM1275 Hot-Swap Controller
   4 * and Digital Power Monitor
   5 *
   6 * Copyright (c) 2011 Ericsson AB.
   7 * Copyright (c) 2018 Guenter Roeck
   8 */
   9
  10#include <linux/kernel.h>
  11#include <linux/module.h>
  12#include <linux/init.h>
  13#include <linux/err.h>
  14#include <linux/slab.h>
  15#include <linux/i2c.h>
  16#include <linux/bitops.h>
  17#include <linux/bitfield.h>
  18#include <linux/log2.h>
  19#include "pmbus.h"
  20
  21enum chips { adm1075, adm1272, adm1275, adm1276, adm1278, adm1293, adm1294 };
  22
  23#define ADM1275_MFR_STATUS_IOUT_WARN2   BIT(0)
  24#define ADM1293_MFR_STATUS_VAUX_UV_WARN BIT(5)
  25#define ADM1293_MFR_STATUS_VAUX_OV_WARN BIT(6)
  26
  27#define ADM1275_PEAK_IOUT               0xd0
  28#define ADM1275_PEAK_VIN                0xd1
  29#define ADM1275_PEAK_VOUT               0xd2
  30#define ADM1275_PMON_CONFIG             0xd4
  31
  32#define ADM1275_VIN_VOUT_SELECT         BIT(6)
  33#define ADM1275_VRANGE                  BIT(5)
  34#define ADM1075_IRANGE_50               BIT(4)
  35#define ADM1075_IRANGE_25               BIT(3)
  36#define ADM1075_IRANGE_MASK             (BIT(3) | BIT(4))
  37
  38#define ADM1272_IRANGE                  BIT(0)
  39
  40#define ADM1278_TEMP1_EN                BIT(3)
  41#define ADM1278_VIN_EN                  BIT(2)
  42#define ADM1278_VOUT_EN                 BIT(1)
  43
  44#define ADM1293_IRANGE_25               0
  45#define ADM1293_IRANGE_50               BIT(6)
  46#define ADM1293_IRANGE_100              BIT(7)
  47#define ADM1293_IRANGE_200              (BIT(6) | BIT(7))
  48#define ADM1293_IRANGE_MASK             (BIT(6) | BIT(7))
  49
  50#define ADM1293_VIN_SEL_012             BIT(2)
  51#define ADM1293_VIN_SEL_074             BIT(3)
  52#define ADM1293_VIN_SEL_210             (BIT(2) | BIT(3))
  53#define ADM1293_VIN_SEL_MASK            (BIT(2) | BIT(3))
  54
  55#define ADM1293_VAUX_EN                 BIT(1)
  56
  57#define ADM1278_PEAK_TEMP               0xd7
  58#define ADM1275_IOUT_WARN2_LIMIT        0xd7
  59#define ADM1275_DEVICE_CONFIG           0xd8
  60
  61#define ADM1275_IOUT_WARN2_SELECT       BIT(4)
  62
  63#define ADM1276_PEAK_PIN                0xda
  64#define ADM1075_READ_VAUX               0xdd
  65#define ADM1075_VAUX_OV_WARN_LIMIT      0xde
  66#define ADM1075_VAUX_UV_WARN_LIMIT      0xdf
  67#define ADM1293_IOUT_MIN                0xe3
  68#define ADM1293_PIN_MIN                 0xe4
  69#define ADM1075_VAUX_STATUS             0xf6
  70
  71#define ADM1075_VAUX_OV_WARN            BIT(7)
  72#define ADM1075_VAUX_UV_WARN            BIT(6)
  73
  74#define ADM1275_VI_AVG_SHIFT            0
  75#define ADM1275_VI_AVG_MASK             GENMASK(ADM1275_VI_AVG_SHIFT + 2, \
  76                                                ADM1275_VI_AVG_SHIFT)
  77#define ADM1275_SAMPLES_AVG_MAX         128
  78
  79#define ADM1278_PWR_AVG_SHIFT           11
  80#define ADM1278_PWR_AVG_MASK            GENMASK(ADM1278_PWR_AVG_SHIFT + 2, \
  81                                                ADM1278_PWR_AVG_SHIFT)
  82#define ADM1278_VI_AVG_SHIFT            8
  83#define ADM1278_VI_AVG_MASK             GENMASK(ADM1278_VI_AVG_SHIFT + 2, \
  84                                                ADM1278_VI_AVG_SHIFT)
  85
  86struct adm1275_data {
  87        int id;
  88        bool have_oc_fault;
  89        bool have_uc_fault;
  90        bool have_vout;
  91        bool have_vaux_status;
  92        bool have_mfr_vaux_status;
  93        bool have_iout_min;
  94        bool have_pin_min;
  95        bool have_pin_max;
  96        bool have_temp_max;
  97        bool have_power_sampling;
  98        struct pmbus_driver_info info;
  99};
 100
 101#define to_adm1275_data(x)  container_of(x, struct adm1275_data, info)
 102
 103struct coefficients {
 104        s16 m;
 105        s16 b;
 106        s16 R;
 107};
 108
 109static const struct coefficients adm1075_coefficients[] = {
 110        [0] = { 27169, 0, -1 },         /* voltage */
 111        [1] = { 806, 20475, -1 },       /* current, irange25 */
 112        [2] = { 404, 20475, -1 },       /* current, irange50 */
 113        [3] = { 8549, 0, -1 },          /* power, irange25 */
 114        [4] = { 4279, 0, -1 },          /* power, irange50 */
 115};
 116
 117static const struct coefficients adm1272_coefficients[] = {
 118        [0] = { 6770, 0, -2 },          /* voltage, vrange 60V */
 119        [1] = { 4062, 0, -2 },          /* voltage, vrange 100V */
 120        [2] = { 1326, 20480, -1 },      /* current, vsense range 15mV */
 121        [3] = { 663, 20480, -1 },       /* current, vsense range 30mV */
 122        [4] = { 3512, 0, -2 },          /* power, vrange 60V, irange 15mV */
 123        [5] = { 21071, 0, -3 },         /* power, vrange 100V, irange 15mV */
 124        [6] = { 17561, 0, -3 },         /* power, vrange 60V, irange 30mV */
 125        [7] = { 10535, 0, -3 },         /* power, vrange 100V, irange 30mV */
 126        [8] = { 42, 31871, -1 },        /* temperature */
 127
 128};
 129
 130static const struct coefficients adm1275_coefficients[] = {
 131        [0] = { 19199, 0, -2 },         /* voltage, vrange set */
 132        [1] = { 6720, 0, -1 },          /* voltage, vrange not set */
 133        [2] = { 807, 20475, -1 },       /* current */
 134};
 135
 136static const struct coefficients adm1276_coefficients[] = {
 137        [0] = { 19199, 0, -2 },         /* voltage, vrange set */
 138        [1] = { 6720, 0, -1 },          /* voltage, vrange not set */
 139        [2] = { 807, 20475, -1 },       /* current */
 140        [3] = { 6043, 0, -2 },          /* power, vrange set */
 141        [4] = { 2115, 0, -1 },          /* power, vrange not set */
 142};
 143
 144static const struct coefficients adm1278_coefficients[] = {
 145        [0] = { 19599, 0, -2 },         /* voltage */
 146        [1] = { 800, 20475, -1 },       /* current */
 147        [2] = { 6123, 0, -2 },          /* power */
 148        [3] = { 42, 31880, -1 },        /* temperature */
 149};
 150
 151static const struct coefficients adm1293_coefficients[] = {
 152        [0] = { 3333, -1, 0 },          /* voltage, vrange 1.2V */
 153        [1] = { 5552, -5, -1 },         /* voltage, vrange 7.4V */
 154        [2] = { 19604, -50, -2 },       /* voltage, vrange 21V */
 155        [3] = { 8000, -100, -2 },       /* current, irange25 */
 156        [4] = { 4000, -100, -2 },       /* current, irange50 */
 157        [5] = { 20000, -1000, -3 },     /* current, irange100 */
 158        [6] = { 10000, -1000, -3 },     /* current, irange200 */
 159        [7] = { 10417, 0, -1 },         /* power, 1.2V, irange25 */
 160        [8] = { 5208, 0, -1 },          /* power, 1.2V, irange50 */
 161        [9] = { 26042, 0, -2 },         /* power, 1.2V, irange100 */
 162        [10] = { 13021, 0, -2 },        /* power, 1.2V, irange200 */
 163        [11] = { 17351, 0, -2 },        /* power, 7.4V, irange25 */
 164        [12] = { 8676, 0, -2 },         /* power, 7.4V, irange50 */
 165        [13] = { 4338, 0, -2 },         /* power, 7.4V, irange100 */
 166        [14] = { 21689, 0, -3 },        /* power, 7.4V, irange200 */
 167        [15] = { 6126, 0, -2 },         /* power, 21V, irange25 */
 168        [16] = { 30631, 0, -3 },        /* power, 21V, irange50 */
 169        [17] = { 15316, 0, -3 },        /* power, 21V, irange100 */
 170        [18] = { 7658, 0, -3 },         /* power, 21V, irange200 */
 171};
 172
 173static int adm1275_read_pmon_config(const struct adm1275_data *data,
 174                                    struct i2c_client *client, bool is_power)
 175{
 176        int shift, ret;
 177        u16 mask;
 178
 179        /*
 180         * The PMON configuration register is a 16-bit register only on chips
 181         * supporting power average sampling. On other chips it is an 8-bit
 182         * register.
 183         */
 184        if (data->have_power_sampling) {
 185                ret = i2c_smbus_read_word_data(client, ADM1275_PMON_CONFIG);
 186                mask = is_power ? ADM1278_PWR_AVG_MASK : ADM1278_VI_AVG_MASK;
 187                shift = is_power ? ADM1278_PWR_AVG_SHIFT : ADM1278_VI_AVG_SHIFT;
 188        } else {
 189                ret = i2c_smbus_read_byte_data(client, ADM1275_PMON_CONFIG);
 190                mask = ADM1275_VI_AVG_MASK;
 191                shift = ADM1275_VI_AVG_SHIFT;
 192        }
 193        if (ret < 0)
 194                return ret;
 195
 196        return (ret & mask) >> shift;
 197}
 198
 199static int adm1275_write_pmon_config(const struct adm1275_data *data,
 200                                     struct i2c_client *client,
 201                                     bool is_power, u16 word)
 202{
 203        int shift, ret;
 204        u16 mask;
 205
 206        if (data->have_power_sampling) {
 207                ret = i2c_smbus_read_word_data(client, ADM1275_PMON_CONFIG);
 208                mask = is_power ? ADM1278_PWR_AVG_MASK : ADM1278_VI_AVG_MASK;
 209                shift = is_power ? ADM1278_PWR_AVG_SHIFT : ADM1278_VI_AVG_SHIFT;
 210        } else {
 211                ret = i2c_smbus_read_byte_data(client, ADM1275_PMON_CONFIG);
 212                mask = ADM1275_VI_AVG_MASK;
 213                shift = ADM1275_VI_AVG_SHIFT;
 214        }
 215        if (ret < 0)
 216                return ret;
 217
 218        word = (ret & ~mask) | ((word << shift) & mask);
 219        if (data->have_power_sampling)
 220                ret = i2c_smbus_write_word_data(client, ADM1275_PMON_CONFIG,
 221                                                word);
 222        else
 223                ret = i2c_smbus_write_byte_data(client, ADM1275_PMON_CONFIG,
 224                                                word);
 225
 226        return ret;
 227}
 228
 229static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
 230{
 231        const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
 232        const struct adm1275_data *data = to_adm1275_data(info);
 233        int ret = 0;
 234
 235        if (page > 0)
 236                return -ENXIO;
 237
 238        switch (reg) {
 239        case PMBUS_IOUT_UC_FAULT_LIMIT:
 240                if (!data->have_uc_fault)
 241                        return -ENXIO;
 242                ret = pmbus_read_word_data(client, 0, ADM1275_IOUT_WARN2_LIMIT);
 243                break;
 244        case PMBUS_IOUT_OC_FAULT_LIMIT:
 245                if (!data->have_oc_fault)
 246                        return -ENXIO;
 247                ret = pmbus_read_word_data(client, 0, ADM1275_IOUT_WARN2_LIMIT);
 248                break;
 249        case PMBUS_VOUT_OV_WARN_LIMIT:
 250                if (data->have_vout)
 251                        return -ENODATA;
 252                ret = pmbus_read_word_data(client, 0,
 253                                           ADM1075_VAUX_OV_WARN_LIMIT);
 254                break;
 255        case PMBUS_VOUT_UV_WARN_LIMIT:
 256                if (data->have_vout)
 257                        return -ENODATA;
 258                ret = pmbus_read_word_data(client, 0,
 259                                           ADM1075_VAUX_UV_WARN_LIMIT);
 260                break;
 261        case PMBUS_READ_VOUT:
 262                if (data->have_vout)
 263                        return -ENODATA;
 264                ret = pmbus_read_word_data(client, 0, ADM1075_READ_VAUX);
 265                break;
 266        case PMBUS_VIRT_READ_IOUT_MIN:
 267                if (!data->have_iout_min)
 268                        return -ENXIO;
 269                ret = pmbus_read_word_data(client, 0, ADM1293_IOUT_MIN);
 270                break;
 271        case PMBUS_VIRT_READ_IOUT_MAX:
 272                ret = pmbus_read_word_data(client, 0, ADM1275_PEAK_IOUT);
 273                break;
 274        case PMBUS_VIRT_READ_VOUT_MAX:
 275                ret = pmbus_read_word_data(client, 0, ADM1275_PEAK_VOUT);
 276                break;
 277        case PMBUS_VIRT_READ_VIN_MAX:
 278                ret = pmbus_read_word_data(client, 0, ADM1275_PEAK_VIN);
 279                break;
 280        case PMBUS_VIRT_READ_PIN_MIN:
 281                if (!data->have_pin_min)
 282                        return -ENXIO;
 283                ret = pmbus_read_word_data(client, 0, ADM1293_PIN_MIN);
 284                break;
 285        case PMBUS_VIRT_READ_PIN_MAX:
 286                if (!data->have_pin_max)
 287                        return -ENXIO;
 288                ret = pmbus_read_word_data(client, 0, ADM1276_PEAK_PIN);
 289                break;
 290        case PMBUS_VIRT_READ_TEMP_MAX:
 291                if (!data->have_temp_max)
 292                        return -ENXIO;
 293                ret = pmbus_read_word_data(client, 0, ADM1278_PEAK_TEMP);
 294                break;
 295        case PMBUS_VIRT_RESET_IOUT_HISTORY:
 296        case PMBUS_VIRT_RESET_VOUT_HISTORY:
 297        case PMBUS_VIRT_RESET_VIN_HISTORY:
 298                break;
 299        case PMBUS_VIRT_RESET_PIN_HISTORY:
 300                if (!data->have_pin_max)
 301                        return -ENXIO;
 302                break;
 303        case PMBUS_VIRT_RESET_TEMP_HISTORY:
 304                if (!data->have_temp_max)
 305                        return -ENXIO;
 306                break;
 307        case PMBUS_VIRT_POWER_SAMPLES:
 308                if (!data->have_power_sampling)
 309                        return -ENXIO;
 310                ret = adm1275_read_pmon_config(data, client, true);
 311                if (ret < 0)
 312                        break;
 313                ret = BIT(ret);
 314                break;
 315        case PMBUS_VIRT_IN_SAMPLES:
 316        case PMBUS_VIRT_CURR_SAMPLES:
 317                ret = adm1275_read_pmon_config(data, client, false);
 318                if (ret < 0)
 319                        break;
 320                ret = BIT(ret);
 321                break;
 322        default:
 323                ret = -ENODATA;
 324                break;
 325        }
 326        return ret;
 327}
 328
 329static int adm1275_write_word_data(struct i2c_client *client, int page, int reg,
 330                                   u16 word)
 331{
 332        const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
 333        const struct adm1275_data *data = to_adm1275_data(info);
 334        int ret;
 335
 336        if (page > 0)
 337                return -ENXIO;
 338
 339        switch (reg) {
 340        case PMBUS_IOUT_UC_FAULT_LIMIT:
 341        case PMBUS_IOUT_OC_FAULT_LIMIT:
 342                ret = pmbus_write_word_data(client, 0, ADM1275_IOUT_WARN2_LIMIT,
 343                                            word);
 344                break;
 345        case PMBUS_VIRT_RESET_IOUT_HISTORY:
 346                ret = pmbus_write_word_data(client, 0, ADM1275_PEAK_IOUT, 0);
 347                if (!ret && data->have_iout_min)
 348                        ret = pmbus_write_word_data(client, 0,
 349                                                    ADM1293_IOUT_MIN, 0);
 350                break;
 351        case PMBUS_VIRT_RESET_VOUT_HISTORY:
 352                ret = pmbus_write_word_data(client, 0, ADM1275_PEAK_VOUT, 0);
 353                break;
 354        case PMBUS_VIRT_RESET_VIN_HISTORY:
 355                ret = pmbus_write_word_data(client, 0, ADM1275_PEAK_VIN, 0);
 356                break;
 357        case PMBUS_VIRT_RESET_PIN_HISTORY:
 358                ret = pmbus_write_word_data(client, 0, ADM1276_PEAK_PIN, 0);
 359                if (!ret && data->have_pin_min)
 360                        ret = pmbus_write_word_data(client, 0,
 361                                                    ADM1293_PIN_MIN, 0);
 362                break;
 363        case PMBUS_VIRT_RESET_TEMP_HISTORY:
 364                ret = pmbus_write_word_data(client, 0, ADM1278_PEAK_TEMP, 0);
 365                break;
 366        case PMBUS_VIRT_POWER_SAMPLES:
 367                if (!data->have_power_sampling)
 368                        return -ENXIO;
 369                word = clamp_val(word, 1, ADM1275_SAMPLES_AVG_MAX);
 370                ret = adm1275_write_pmon_config(data, client, true,
 371                                                ilog2(word));
 372                break;
 373        case PMBUS_VIRT_IN_SAMPLES:
 374        case PMBUS_VIRT_CURR_SAMPLES:
 375                word = clamp_val(word, 1, ADM1275_SAMPLES_AVG_MAX);
 376                ret = adm1275_write_pmon_config(data, client, false,
 377                                                ilog2(word));
 378                break;
 379        default:
 380                ret = -ENODATA;
 381                break;
 382        }
 383        return ret;
 384}
 385
 386static int adm1275_read_byte_data(struct i2c_client *client, int page, int reg)
 387{
 388        const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
 389        const struct adm1275_data *data = to_adm1275_data(info);
 390        int mfr_status, ret;
 391
 392        if (page > 0)
 393                return -ENXIO;
 394
 395        switch (reg) {
 396        case PMBUS_STATUS_IOUT:
 397                ret = pmbus_read_byte_data(client, page, PMBUS_STATUS_IOUT);
 398                if (ret < 0)
 399                        break;
 400                if (!data->have_oc_fault && !data->have_uc_fault)
 401                        break;
 402                mfr_status = pmbus_read_byte_data(client, page,
 403                                                  PMBUS_STATUS_MFR_SPECIFIC);
 404                if (mfr_status < 0)
 405                        return mfr_status;
 406                if (mfr_status & ADM1275_MFR_STATUS_IOUT_WARN2) {
 407                        ret |= data->have_oc_fault ?
 408                          PB_IOUT_OC_FAULT : PB_IOUT_UC_FAULT;
 409                }
 410                break;
 411        case PMBUS_STATUS_VOUT:
 412                if (data->have_vout)
 413                        return -ENODATA;
 414                ret = 0;
 415                if (data->have_vaux_status) {
 416                        mfr_status = pmbus_read_byte_data(client, 0,
 417                                                          ADM1075_VAUX_STATUS);
 418                        if (mfr_status < 0)
 419                                return mfr_status;
 420                        if (mfr_status & ADM1075_VAUX_OV_WARN)
 421                                ret |= PB_VOLTAGE_OV_WARNING;
 422                        if (mfr_status & ADM1075_VAUX_UV_WARN)
 423                                ret |= PB_VOLTAGE_UV_WARNING;
 424                } else if (data->have_mfr_vaux_status) {
 425                        mfr_status = pmbus_read_byte_data(client, page,
 426                                                PMBUS_STATUS_MFR_SPECIFIC);
 427                        if (mfr_status < 0)
 428                                return mfr_status;
 429                        if (mfr_status & ADM1293_MFR_STATUS_VAUX_OV_WARN)
 430                                ret |= PB_VOLTAGE_OV_WARNING;
 431                        if (mfr_status & ADM1293_MFR_STATUS_VAUX_UV_WARN)
 432                                ret |= PB_VOLTAGE_UV_WARNING;
 433                }
 434                break;
 435        default:
 436                ret = -ENODATA;
 437                break;
 438        }
 439        return ret;
 440}
 441
 442static const struct i2c_device_id adm1275_id[] = {
 443        { "adm1075", adm1075 },
 444        { "adm1272", adm1272 },
 445        { "adm1275", adm1275 },
 446        { "adm1276", adm1276 },
 447        { "adm1278", adm1278 },
 448        { "adm1293", adm1293 },
 449        { "adm1294", adm1294 },
 450        { }
 451};
 452MODULE_DEVICE_TABLE(i2c, adm1275_id);
 453
 454static int adm1275_probe(struct i2c_client *client,
 455                         const struct i2c_device_id *id)
 456{
 457        u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1];
 458        int config, device_config;
 459        int ret;
 460        struct pmbus_driver_info *info;
 461        struct adm1275_data *data;
 462        const struct i2c_device_id *mid;
 463        const struct coefficients *coefficients;
 464        int vindex = -1, voindex = -1, cindex = -1, pindex = -1;
 465        int tindex = -1;
 466        u32 shunt;
 467
 468        if (!i2c_check_functionality(client->adapter,
 469                                     I2C_FUNC_SMBUS_READ_BYTE_DATA
 470                                     | I2C_FUNC_SMBUS_BLOCK_DATA))
 471                return -ENODEV;
 472
 473        ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, block_buffer);
 474        if (ret < 0) {
 475                dev_err(&client->dev, "Failed to read Manufacturer ID\n");
 476                return ret;
 477        }
 478        if (ret != 3 || strncmp(block_buffer, "ADI", 3)) {
 479                dev_err(&client->dev, "Unsupported Manufacturer ID\n");
 480                return -ENODEV;
 481        }
 482
 483        ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, block_buffer);
 484        if (ret < 0) {
 485                dev_err(&client->dev, "Failed to read Manufacturer Model\n");
 486                return ret;
 487        }
 488        for (mid = adm1275_id; mid->name[0]; mid++) {
 489                if (!strncasecmp(mid->name, block_buffer, strlen(mid->name)))
 490                        break;
 491        }
 492        if (!mid->name[0]) {
 493                dev_err(&client->dev, "Unsupported device\n");
 494                return -ENODEV;
 495        }
 496
 497        if (id->driver_data != mid->driver_data)
 498                dev_notice(&client->dev,
 499                           "Device mismatch: Configured %s, detected %s\n",
 500                           id->name, mid->name);
 501
 502        config = i2c_smbus_read_byte_data(client, ADM1275_PMON_CONFIG);
 503        if (config < 0)
 504                return config;
 505
 506        device_config = i2c_smbus_read_byte_data(client, ADM1275_DEVICE_CONFIG);
 507        if (device_config < 0)
 508                return device_config;
 509
 510        data = devm_kzalloc(&client->dev, sizeof(struct adm1275_data),
 511                            GFP_KERNEL);
 512        if (!data)
 513                return -ENOMEM;
 514
 515        if (of_property_read_u32(client->dev.of_node,
 516                                 "shunt-resistor-micro-ohms", &shunt))
 517                shunt = 1000; /* 1 mOhm if not set via DT */
 518
 519        if (shunt == 0)
 520                return -EINVAL;
 521
 522        data->id = mid->driver_data;
 523
 524        info = &data->info;
 525
 526        info->pages = 1;
 527        info->format[PSC_VOLTAGE_IN] = direct;
 528        info->format[PSC_VOLTAGE_OUT] = direct;
 529        info->format[PSC_CURRENT_OUT] = direct;
 530        info->format[PSC_POWER] = direct;
 531        info->format[PSC_TEMPERATURE] = direct;
 532        info->func[0] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
 533                        PMBUS_HAVE_SAMPLES;
 534
 535        info->read_word_data = adm1275_read_word_data;
 536        info->read_byte_data = adm1275_read_byte_data;
 537        info->write_word_data = adm1275_write_word_data;
 538
 539        switch (data->id) {
 540        case adm1075:
 541                if (device_config & ADM1275_IOUT_WARN2_SELECT)
 542                        data->have_oc_fault = true;
 543                else
 544                        data->have_uc_fault = true;
 545                data->have_pin_max = true;
 546                data->have_vaux_status = true;
 547
 548                coefficients = adm1075_coefficients;
 549                vindex = 0;
 550                switch (config & ADM1075_IRANGE_MASK) {
 551                case ADM1075_IRANGE_25:
 552                        cindex = 1;
 553                        pindex = 3;
 554                        break;
 555                case ADM1075_IRANGE_50:
 556                        cindex = 2;
 557                        pindex = 4;
 558                        break;
 559                default:
 560                        dev_err(&client->dev, "Invalid input current range");
 561                        break;
 562                }
 563
 564                info->func[0] |= PMBUS_HAVE_VIN | PMBUS_HAVE_PIN
 565                  | PMBUS_HAVE_STATUS_INPUT;
 566                if (config & ADM1275_VIN_VOUT_SELECT)
 567                        info->func[0] |=
 568                          PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
 569                break;
 570        case adm1272:
 571                data->have_vout = true;
 572                data->have_pin_max = true;
 573                data->have_temp_max = true;
 574                data->have_power_sampling = true;
 575
 576                coefficients = adm1272_coefficients;
 577                vindex = (config & ADM1275_VRANGE) ? 1 : 0;
 578                cindex = (config & ADM1272_IRANGE) ? 3 : 2;
 579                /* pindex depends on the combination of the above */
 580                switch (config & (ADM1275_VRANGE | ADM1272_IRANGE)) {
 581                case 0:
 582                default:
 583                        pindex = 4;
 584                        break;
 585                case ADM1275_VRANGE:
 586                        pindex = 5;
 587                        break;
 588                case ADM1272_IRANGE:
 589                        pindex = 6;
 590                        break;
 591                case ADM1275_VRANGE | ADM1272_IRANGE:
 592                        pindex = 7;
 593                        break;
 594                }
 595                tindex = 8;
 596
 597                info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT |
 598                        PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
 599
 600                /* Enable VOUT if not enabled (it is disabled by default) */
 601                if (!(config & ADM1278_VOUT_EN)) {
 602                        config |= ADM1278_VOUT_EN;
 603                        ret = i2c_smbus_write_byte_data(client,
 604                                                        ADM1275_PMON_CONFIG,
 605                                                        config);
 606                        if (ret < 0) {
 607                                dev_err(&client->dev,
 608                                        "Failed to enable VOUT monitoring\n");
 609                                return -ENODEV;
 610                        }
 611                }
 612
 613                if (config & ADM1278_TEMP1_EN)
 614                        info->func[0] |=
 615                                PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
 616                if (config & ADM1278_VIN_EN)
 617                        info->func[0] |= PMBUS_HAVE_VIN;
 618                break;
 619        case adm1275:
 620                if (device_config & ADM1275_IOUT_WARN2_SELECT)
 621                        data->have_oc_fault = true;
 622                else
 623                        data->have_uc_fault = true;
 624                data->have_vout = true;
 625
 626                coefficients = adm1275_coefficients;
 627                vindex = (config & ADM1275_VRANGE) ? 0 : 1;
 628                cindex = 2;
 629
 630                if (config & ADM1275_VIN_VOUT_SELECT)
 631                        info->func[0] |=
 632                          PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
 633                else
 634                        info->func[0] |=
 635                          PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT;
 636                break;
 637        case adm1276:
 638                if (device_config & ADM1275_IOUT_WARN2_SELECT)
 639                        data->have_oc_fault = true;
 640                else
 641                        data->have_uc_fault = true;
 642                data->have_vout = true;
 643                data->have_pin_max = true;
 644
 645                coefficients = adm1276_coefficients;
 646                vindex = (config & ADM1275_VRANGE) ? 0 : 1;
 647                cindex = 2;
 648                pindex = (config & ADM1275_VRANGE) ? 3 : 4;
 649
 650                info->func[0] |= PMBUS_HAVE_VIN | PMBUS_HAVE_PIN
 651                  | PMBUS_HAVE_STATUS_INPUT;
 652                if (config & ADM1275_VIN_VOUT_SELECT)
 653                        info->func[0] |=
 654                          PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
 655                break;
 656        case adm1278:
 657                data->have_vout = true;
 658                data->have_pin_max = true;
 659                data->have_temp_max = true;
 660                data->have_power_sampling = true;
 661
 662                coefficients = adm1278_coefficients;
 663                vindex = 0;
 664                cindex = 1;
 665                pindex = 2;
 666                tindex = 3;
 667
 668                info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT |
 669                        PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
 670
 671                /* Enable VOUT if not enabled (it is disabled by default) */
 672                if (!(config & ADM1278_VOUT_EN)) {
 673                        config |= ADM1278_VOUT_EN;
 674                        ret = i2c_smbus_write_byte_data(client,
 675                                                        ADM1275_PMON_CONFIG,
 676                                                        config);
 677                        if (ret < 0) {
 678                                dev_err(&client->dev,
 679                                        "Failed to enable VOUT monitoring\n");
 680                                return -ENODEV;
 681                        }
 682                }
 683
 684                if (config & ADM1278_TEMP1_EN)
 685                        info->func[0] |=
 686                                PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
 687                if (config & ADM1278_VIN_EN)
 688                        info->func[0] |= PMBUS_HAVE_VIN;
 689                break;
 690        case adm1293:
 691        case adm1294:
 692                data->have_iout_min = true;
 693                data->have_pin_min = true;
 694                data->have_pin_max = true;
 695                data->have_mfr_vaux_status = true;
 696                data->have_power_sampling = true;
 697
 698                coefficients = adm1293_coefficients;
 699
 700                voindex = 0;
 701                switch (config & ADM1293_VIN_SEL_MASK) {
 702                case ADM1293_VIN_SEL_012:       /* 1.2V */
 703                        vindex = 0;
 704                        break;
 705                case ADM1293_VIN_SEL_074:       /* 7.4V */
 706                        vindex = 1;
 707                        break;
 708                case ADM1293_VIN_SEL_210:       /* 21V */
 709                        vindex = 2;
 710                        break;
 711                default:                        /* disabled */
 712                        break;
 713                }
 714
 715                switch (config & ADM1293_IRANGE_MASK) {
 716                case ADM1293_IRANGE_25:
 717                        cindex = 3;
 718                        break;
 719                case ADM1293_IRANGE_50:
 720                        cindex = 4;
 721                        break;
 722                case ADM1293_IRANGE_100:
 723                        cindex = 5;
 724                        break;
 725                case ADM1293_IRANGE_200:
 726                        cindex = 6;
 727                        break;
 728                }
 729
 730                if (vindex >= 0)
 731                        pindex = 7 + vindex * 4 + (cindex - 3);
 732
 733                if (config & ADM1293_VAUX_EN)
 734                        info->func[0] |=
 735                                PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
 736
 737                info->func[0] |= PMBUS_HAVE_PIN |
 738                        PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT;
 739
 740                break;
 741        default:
 742                dev_err(&client->dev, "Unsupported device\n");
 743                return -ENODEV;
 744        }
 745
 746        if (voindex < 0)
 747                voindex = vindex;
 748        if (vindex >= 0) {
 749                info->m[PSC_VOLTAGE_IN] = coefficients[vindex].m;
 750                info->b[PSC_VOLTAGE_IN] = coefficients[vindex].b;
 751                info->R[PSC_VOLTAGE_IN] = coefficients[vindex].R;
 752        }
 753        if (voindex >= 0) {
 754                info->m[PSC_VOLTAGE_OUT] = coefficients[voindex].m;
 755                info->b[PSC_VOLTAGE_OUT] = coefficients[voindex].b;
 756                info->R[PSC_VOLTAGE_OUT] = coefficients[voindex].R;
 757        }
 758        if (cindex >= 0) {
 759                /* Scale current with sense resistor value */
 760                info->m[PSC_CURRENT_OUT] =
 761                        coefficients[cindex].m * shunt / 1000;
 762                info->b[PSC_CURRENT_OUT] = coefficients[cindex].b;
 763                info->R[PSC_CURRENT_OUT] = coefficients[cindex].R;
 764        }
 765        if (pindex >= 0) {
 766                info->m[PSC_POWER] =
 767                        coefficients[pindex].m * shunt / 1000;
 768                info->b[PSC_POWER] = coefficients[pindex].b;
 769                info->R[PSC_POWER] = coefficients[pindex].R;
 770        }
 771        if (tindex >= 0) {
 772                info->m[PSC_TEMPERATURE] = coefficients[tindex].m;
 773                info->b[PSC_TEMPERATURE] = coefficients[tindex].b;
 774                info->R[PSC_TEMPERATURE] = coefficients[tindex].R;
 775        }
 776
 777        return pmbus_do_probe(client, id, info);
 778}
 779
 780static struct i2c_driver adm1275_driver = {
 781        .driver = {
 782                   .name = "adm1275",
 783                   },
 784        .probe = adm1275_probe,
 785        .remove = pmbus_do_remove,
 786        .id_table = adm1275_id,
 787};
 788
 789module_i2c_driver(adm1275_driver);
 790
 791MODULE_AUTHOR("Guenter Roeck");
 792MODULE_DESCRIPTION("PMBus driver for Analog Devices ADM1275 and compatibles");
 793MODULE_LICENSE("GPL");
 794