linux/drivers/power/supply/max8903_charger.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-or-later
   2/*
   3 * max8903_charger.c - Maxim 8903 USB/Adapter Charger Driver
   4 *
   5 * Copyright (C) 2011 Samsung Electronics
   6 * MyungJoo Ham <myungjoo.ham@samsung.com>
   7 */
   8
   9#include <linux/gpio.h>
  10#include <linux/interrupt.h>
  11#include <linux/module.h>
  12#include <linux/of.h>
  13#include <linux/of_device.h>
  14#include <linux/of_gpio.h>
  15#include <linux/slab.h>
  16#include <linux/power_supply.h>
  17#include <linux/platform_device.h>
  18#include <linux/power/max8903_charger.h>
  19
  20struct max8903_data {
  21        struct max8903_pdata *pdata;
  22        struct device *dev;
  23        struct power_supply *psy;
  24        struct power_supply_desc psy_desc;
  25        bool fault;
  26        bool usb_in;
  27        bool ta_in;
  28};
  29
  30static enum power_supply_property max8903_charger_props[] = {
  31        POWER_SUPPLY_PROP_STATUS, /* Charger status output */
  32        POWER_SUPPLY_PROP_ONLINE, /* External power source */
  33        POWER_SUPPLY_PROP_HEALTH, /* Fault or OK */
  34};
  35
  36static int max8903_get_property(struct power_supply *psy,
  37                enum power_supply_property psp,
  38                union power_supply_propval *val)
  39{
  40        struct max8903_data *data = power_supply_get_drvdata(psy);
  41
  42        switch (psp) {
  43        case POWER_SUPPLY_PROP_STATUS:
  44                val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
  45                if (gpio_is_valid(data->pdata->chg)) {
  46                        if (gpio_get_value(data->pdata->chg) == 0)
  47                                val->intval = POWER_SUPPLY_STATUS_CHARGING;
  48                        else if (data->usb_in || data->ta_in)
  49                                val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
  50                        else
  51                                val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
  52                }
  53                break;
  54        case POWER_SUPPLY_PROP_ONLINE:
  55                val->intval = 0;
  56                if (data->usb_in || data->ta_in)
  57                        val->intval = 1;
  58                break;
  59        case POWER_SUPPLY_PROP_HEALTH:
  60                val->intval = POWER_SUPPLY_HEALTH_GOOD;
  61                if (data->fault)
  62                        val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
  63                break;
  64        default:
  65                return -EINVAL;
  66        }
  67
  68        return 0;
  69}
  70
  71static irqreturn_t max8903_dcin(int irq, void *_data)
  72{
  73        struct max8903_data *data = _data;
  74        struct max8903_pdata *pdata = data->pdata;
  75        bool ta_in;
  76        enum power_supply_type old_type;
  77
  78        ta_in = gpio_get_value(pdata->dok) ? false : true;
  79
  80        if (ta_in == data->ta_in)
  81                return IRQ_HANDLED;
  82
  83        data->ta_in = ta_in;
  84
  85        /* Set Current-Limit-Mode 1:DC 0:USB */
  86        if (gpio_is_valid(pdata->dcm))
  87                gpio_set_value(pdata->dcm, ta_in ? 1 : 0);
  88
  89        /* Charger Enable / Disable (cen is negated) */
  90        if (gpio_is_valid(pdata->cen))
  91                gpio_set_value(pdata->cen, ta_in ? 0 :
  92                                (data->usb_in ? 0 : 1));
  93
  94        dev_dbg(data->dev, "TA(DC-IN) Charger %s.\n", ta_in ?
  95                        "Connected" : "Disconnected");
  96
  97        old_type = data->psy_desc.type;
  98
  99        if (data->ta_in)
 100                data->psy_desc.type = POWER_SUPPLY_TYPE_MAINS;
 101        else if (data->usb_in)
 102                data->psy_desc.type = POWER_SUPPLY_TYPE_USB;
 103        else
 104                data->psy_desc.type = POWER_SUPPLY_TYPE_BATTERY;
 105
 106        if (old_type != data->psy_desc.type)
 107                power_supply_changed(data->psy);
 108
 109        return IRQ_HANDLED;
 110}
 111
 112static irqreturn_t max8903_usbin(int irq, void *_data)
 113{
 114        struct max8903_data *data = _data;
 115        struct max8903_pdata *pdata = data->pdata;
 116        bool usb_in;
 117        enum power_supply_type old_type;
 118
 119        usb_in = gpio_get_value(pdata->uok) ? false : true;
 120
 121        if (usb_in == data->usb_in)
 122                return IRQ_HANDLED;
 123
 124        data->usb_in = usb_in;
 125
 126        /* Do not touch Current-Limit-Mode */
 127
 128        /* Charger Enable / Disable (cen is negated) */
 129        if (gpio_is_valid(pdata->cen))
 130                gpio_set_value(pdata->cen, usb_in ? 0 :
 131                                (data->ta_in ? 0 : 1));
 132
 133        dev_dbg(data->dev, "USB Charger %s.\n", usb_in ?
 134                        "Connected" : "Disconnected");
 135
 136        old_type = data->psy_desc.type;
 137
 138        if (data->ta_in)
 139                data->psy_desc.type = POWER_SUPPLY_TYPE_MAINS;
 140        else if (data->usb_in)
 141                data->psy_desc.type = POWER_SUPPLY_TYPE_USB;
 142        else
 143                data->psy_desc.type = POWER_SUPPLY_TYPE_BATTERY;
 144
 145        if (old_type != data->psy_desc.type)
 146                power_supply_changed(data->psy);
 147
 148        return IRQ_HANDLED;
 149}
 150
 151static irqreturn_t max8903_fault(int irq, void *_data)
 152{
 153        struct max8903_data *data = _data;
 154        struct max8903_pdata *pdata = data->pdata;
 155        bool fault;
 156
 157        fault = gpio_get_value(pdata->flt) ? false : true;
 158
 159        if (fault == data->fault)
 160                return IRQ_HANDLED;
 161
 162        data->fault = fault;
 163
 164        if (fault)
 165                dev_err(data->dev, "Charger suffers a fault and stops.\n");
 166        else
 167                dev_err(data->dev, "Charger recovered from a fault.\n");
 168
 169        return IRQ_HANDLED;
 170}
 171
 172static struct max8903_pdata *max8903_parse_dt_data(struct device *dev)
 173{
 174        struct device_node *np = dev->of_node;
 175        struct max8903_pdata *pdata = NULL;
 176
 177        if (!np)
 178                return NULL;
 179
 180        pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
 181        if (!pdata)
 182                return NULL;
 183
 184        pdata->dc_valid = false;
 185        pdata->usb_valid = false;
 186
 187        pdata->cen = of_get_named_gpio(np, "cen-gpios", 0);
 188        if (!gpio_is_valid(pdata->cen))
 189                pdata->cen = -EINVAL;
 190
 191        pdata->chg = of_get_named_gpio(np, "chg-gpios", 0);
 192        if (!gpio_is_valid(pdata->chg))
 193                pdata->chg = -EINVAL;
 194
 195        pdata->flt = of_get_named_gpio(np, "flt-gpios", 0);
 196        if (!gpio_is_valid(pdata->flt))
 197                pdata->flt = -EINVAL;
 198
 199        pdata->usus = of_get_named_gpio(np, "usus-gpios", 0);
 200        if (!gpio_is_valid(pdata->usus))
 201                pdata->usus = -EINVAL;
 202
 203        pdata->dcm = of_get_named_gpio(np, "dcm-gpios", 0);
 204        if (!gpio_is_valid(pdata->dcm))
 205                pdata->dcm = -EINVAL;
 206
 207        pdata->dok = of_get_named_gpio(np, "dok-gpios", 0);
 208        if (!gpio_is_valid(pdata->dok))
 209                pdata->dok = -EINVAL;
 210        else
 211                pdata->dc_valid = true;
 212
 213        pdata->uok = of_get_named_gpio(np, "uok-gpios", 0);
 214        if (!gpio_is_valid(pdata->uok))
 215                pdata->uok = -EINVAL;
 216        else
 217                pdata->usb_valid = true;
 218
 219        return pdata;
 220}
 221
 222static int max8903_setup_gpios(struct platform_device *pdev)
 223{
 224        struct max8903_data *data = platform_get_drvdata(pdev);
 225        struct device *dev = &pdev->dev;
 226        struct max8903_pdata *pdata = pdev->dev.platform_data;
 227        int ret = 0;
 228        int gpio;
 229        int ta_in = 0;
 230        int usb_in = 0;
 231
 232        if (pdata->dc_valid) {
 233                if (gpio_is_valid(pdata->dok)) {
 234                        ret = devm_gpio_request(dev, pdata->dok,
 235                                                data->psy_desc.name);
 236                        if (ret) {
 237                                dev_err(dev,
 238                                        "Failed GPIO request for dok: %d err %d\n",
 239                                        pdata->dok, ret);
 240                                return ret;
 241                        }
 242
 243                        gpio = pdata->dok; /* PULL_UPed Interrupt */
 244                        ta_in = gpio_get_value(gpio) ? 0 : 1;
 245                } else {
 246                        dev_err(dev, "When DC is wired, DOK should be wired as well.\n");
 247                        return -EINVAL;
 248                }
 249        }
 250
 251        if (gpio_is_valid(pdata->dcm)) {
 252                ret = devm_gpio_request(dev, pdata->dcm, data->psy_desc.name);
 253                if (ret) {
 254                        dev_err(dev,
 255                                "Failed GPIO request for dcm: %d err %d\n",
 256                                pdata->dcm, ret);
 257                        return ret;
 258                }
 259
 260                gpio = pdata->dcm; /* Output */
 261                gpio_set_value(gpio, ta_in);
 262        }
 263
 264        if (pdata->usb_valid) {
 265                if (gpio_is_valid(pdata->uok)) {
 266                        ret = devm_gpio_request(dev, pdata->uok,
 267                                                data->psy_desc.name);
 268                        if (ret) {
 269                                dev_err(dev,
 270                                        "Failed GPIO request for uok: %d err %d\n",
 271                                        pdata->uok, ret);
 272                                return ret;
 273                        }
 274
 275                        gpio = pdata->uok;
 276                        usb_in = gpio_get_value(gpio) ? 0 : 1;
 277                } else {
 278                        dev_err(dev, "When USB is wired, UOK should be wired."
 279                                        "as well.\n");
 280                        return -EINVAL;
 281                }
 282        }
 283
 284        if (gpio_is_valid(pdata->cen)) {
 285                ret = devm_gpio_request(dev, pdata->cen, data->psy_desc.name);
 286                if (ret) {
 287                        dev_err(dev,
 288                                "Failed GPIO request for cen: %d err %d\n",
 289                                pdata->cen, ret);
 290                        return ret;
 291                }
 292
 293                gpio_set_value(pdata->cen, (ta_in || usb_in) ? 0 : 1);
 294        }
 295
 296        if (gpio_is_valid(pdata->chg)) {
 297                ret = devm_gpio_request(dev, pdata->chg, data->psy_desc.name);
 298                if (ret) {
 299                        dev_err(dev,
 300                                "Failed GPIO request for chg: %d err %d\n",
 301                                pdata->chg, ret);
 302                        return ret;
 303                }
 304        }
 305
 306        if (gpio_is_valid(pdata->flt)) {
 307                ret = devm_gpio_request(dev, pdata->flt, data->psy_desc.name);
 308                if (ret) {
 309                        dev_err(dev,
 310                                "Failed GPIO request for flt: %d err %d\n",
 311                                pdata->flt, ret);
 312                        return ret;
 313                }
 314        }
 315
 316        if (gpio_is_valid(pdata->usus)) {
 317                ret = devm_gpio_request(dev, pdata->usus, data->psy_desc.name);
 318                if (ret) {
 319                        dev_err(dev,
 320                                "Failed GPIO request for usus: %d err %d\n",
 321                                pdata->usus, ret);
 322                        return ret;
 323                }
 324        }
 325
 326        data->fault = false;
 327        data->ta_in = ta_in;
 328        data->usb_in = usb_in;
 329
 330        return 0;
 331}
 332
 333static int max8903_probe(struct platform_device *pdev)
 334{
 335        struct max8903_data *data;
 336        struct device *dev = &pdev->dev;
 337        struct max8903_pdata *pdata = pdev->dev.platform_data;
 338        struct power_supply_config psy_cfg = {};
 339        int ret = 0;
 340
 341        data = devm_kzalloc(dev, sizeof(struct max8903_data), GFP_KERNEL);
 342        if (!data)
 343                return -ENOMEM;
 344
 345        if (IS_ENABLED(CONFIG_OF) && !pdata && dev->of_node)
 346                pdata = max8903_parse_dt_data(dev);
 347
 348        if (!pdata) {
 349                dev_err(dev, "No platform data.\n");
 350                return -EINVAL;
 351        }
 352
 353        pdev->dev.platform_data = pdata;
 354        data->pdata = pdata;
 355        data->dev = dev;
 356        platform_set_drvdata(pdev, data);
 357
 358        if (pdata->dc_valid == false && pdata->usb_valid == false) {
 359                dev_err(dev, "No valid power sources.\n");
 360                return -EINVAL;
 361        }
 362
 363        ret = max8903_setup_gpios(pdev);
 364        if (ret)
 365                return ret;
 366
 367        data->psy_desc.name = "max8903_charger";
 368        data->psy_desc.type = (data->ta_in) ? POWER_SUPPLY_TYPE_MAINS :
 369                        ((data->usb_in) ? POWER_SUPPLY_TYPE_USB :
 370                         POWER_SUPPLY_TYPE_BATTERY);
 371        data->psy_desc.get_property = max8903_get_property;
 372        data->psy_desc.properties = max8903_charger_props;
 373        data->psy_desc.num_properties = ARRAY_SIZE(max8903_charger_props);
 374
 375        psy_cfg.of_node = dev->of_node;
 376        psy_cfg.drv_data = data;
 377
 378        data->psy = devm_power_supply_register(dev, &data->psy_desc, &psy_cfg);
 379        if (IS_ERR(data->psy)) {
 380                dev_err(dev, "failed: power supply register.\n");
 381                return PTR_ERR(data->psy);
 382        }
 383
 384        if (pdata->dc_valid) {
 385                ret = devm_request_threaded_irq(dev, gpio_to_irq(pdata->dok),
 386                                        NULL, max8903_dcin,
 387                                        IRQF_TRIGGER_FALLING |
 388                                        IRQF_TRIGGER_RISING | IRQF_ONESHOT,
 389                                        "MAX8903 DC IN", data);
 390                if (ret) {
 391                        dev_err(dev, "Cannot request irq %d for DC (%d)\n",
 392                                        gpio_to_irq(pdata->dok), ret);
 393                        return ret;
 394                }
 395        }
 396
 397        if (pdata->usb_valid) {
 398                ret = devm_request_threaded_irq(dev, gpio_to_irq(pdata->uok),
 399                                        NULL, max8903_usbin,
 400                                        IRQF_TRIGGER_FALLING |
 401                                        IRQF_TRIGGER_RISING | IRQF_ONESHOT,
 402                                        "MAX8903 USB IN", data);
 403                if (ret) {
 404                        dev_err(dev, "Cannot request irq %d for USB (%d)\n",
 405                                        gpio_to_irq(pdata->uok), ret);
 406                        return ret;
 407                }
 408        }
 409
 410        if (gpio_is_valid(pdata->flt)) {
 411                ret = devm_request_threaded_irq(dev, gpio_to_irq(pdata->flt),
 412                                        NULL, max8903_fault,
 413                                        IRQF_TRIGGER_FALLING |
 414                                        IRQF_TRIGGER_RISING | IRQF_ONESHOT,
 415                                        "MAX8903 Fault", data);
 416                if (ret) {
 417                        dev_err(dev, "Cannot request irq %d for Fault (%d)\n",
 418                                        gpio_to_irq(pdata->flt), ret);
 419                        return ret;
 420                }
 421        }
 422
 423        return 0;
 424}
 425
 426static const struct of_device_id max8903_match_ids[] = {
 427        { .compatible = "maxim,max8903", },
 428        { /* sentinel */ }
 429};
 430MODULE_DEVICE_TABLE(of, max8903_match_ids);
 431
 432static struct platform_driver max8903_driver = {
 433        .probe  = max8903_probe,
 434        .driver = {
 435                .name   = "max8903-charger",
 436                .of_match_table = max8903_match_ids
 437        },
 438};
 439
 440module_platform_driver(max8903_driver);
 441
 442MODULE_LICENSE("GPL");
 443MODULE_DESCRIPTION("MAX8903 Charger Driver");
 444MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
 445MODULE_ALIAS("platform:max8903-charger");
 446