linux/drivers/usb/typec/ucsi/ucsi.h
<<
>>
Prefs
   1/* SPDX-License-Identifier: GPL-2.0 */
   2
   3#ifndef __DRIVER_USB_TYPEC_UCSI_H
   4#define __DRIVER_USB_TYPEC_UCSI_H
   5
   6#include <linux/bitops.h>
   7#include <linux/device.h>
   8#include <linux/types.h>
   9#include <linux/usb/typec.h>
  10
  11/* -------------------------------------------------------------------------- */
  12
  13/* Command Status and Connector Change Indication (CCI) data structure */
  14struct ucsi_cci {
  15        u8:1; /* reserved */
  16        u8 connector_change:7;
  17        u8 data_length;
  18        u16:9; /* reserved */
  19        u16 not_supported:1;
  20        u16 cancel_complete:1;
  21        u16 reset_complete:1;
  22        u16 busy:1;
  23        u16 ack_complete:1;
  24        u16 error:1;
  25        u16 cmd_complete:1;
  26} __packed;
  27
  28/* Default fields in CONTROL data structure */
  29struct ucsi_command {
  30        u8 cmd;
  31        u8 length;
  32        u64 data:48;
  33} __packed;
  34
  35/* ACK Command structure */
  36struct ucsi_ack_cmd {
  37        u8 cmd;
  38        u8 length;
  39        u8 cci_ack:1;
  40        u8 cmd_ack:1;
  41        u8:6; /* reserved */
  42} __packed;
  43
  44/* Connector Reset Command structure */
  45struct ucsi_con_rst {
  46        u8 cmd;
  47        u8 length;
  48        u8 con_num:7;
  49        u8 hard_reset:1;
  50} __packed;
  51
  52/* Set USB Operation Mode Command structure */
  53struct ucsi_uor_cmd {
  54        u8 cmd;
  55        u8 length;
  56        u16 con_num:7;
  57        u16 role:3;
  58#define UCSI_UOR_ROLE_DFP                       BIT(0)
  59#define UCSI_UOR_ROLE_UFP                       BIT(1)
  60#define UCSI_UOR_ROLE_DRP                       BIT(2)
  61        u16:6; /* reserved */
  62} __packed;
  63
  64/* Get Alternate Modes Command structure */
  65struct ucsi_altmode_cmd {
  66        u8 cmd;
  67        u8 length;
  68        u8 recipient;
  69#define UCSI_RECIPIENT_CON                      0
  70#define UCSI_RECIPIENT_SOP                      1
  71#define UCSI_RECIPIENT_SOP_P                    2
  72#define UCSI_RECIPIENT_SOP_PP                   3
  73        u8 con_num;
  74        u8 offset;
  75        u8 num_altmodes;
  76} __packed;
  77
  78struct ucsi_control {
  79        union {
  80                u64 raw_cmd;
  81                struct ucsi_command cmd;
  82                struct ucsi_uor_cmd uor;
  83                struct ucsi_ack_cmd ack;
  84                struct ucsi_con_rst con_rst;
  85                struct ucsi_altmode_cmd alt;
  86        };
  87};
  88
  89#define __UCSI_CMD(_ctrl_, _cmd_)                                       \
  90{                                                                       \
  91        (_ctrl_).raw_cmd = 0;                                           \
  92        (_ctrl_).cmd.cmd = _cmd_;                                       \
  93}
  94
  95/* Helper for preparing ucsi_control for CONNECTOR_RESET command. */
  96#define UCSI_CMD_CONNECTOR_RESET(_ctrl_, _con_, _hard_)                 \
  97{                                                                       \
  98        __UCSI_CMD(_ctrl_, UCSI_CONNECTOR_RESET)                        \
  99        (_ctrl_).con_rst.con_num = (_con_)->num;                        \
 100        (_ctrl_).con_rst.hard_reset = _hard_;                           \
 101}
 102
 103/* Helper for preparing ucsi_control for ACK_CC_CI command. */
 104#define UCSI_CMD_ACK(_ctrl_, _ack_)                                     \
 105{                                                                       \
 106        __UCSI_CMD(_ctrl_, UCSI_ACK_CC_CI)                              \
 107        (_ctrl_).ack.cci_ack = ((_ack_) == UCSI_ACK_EVENT);             \
 108        (_ctrl_).ack.cmd_ack = ((_ack_) == UCSI_ACK_CMD);               \
 109}
 110
 111/* Helper for preparing ucsi_control for SET_NOTIFY_ENABLE command. */
 112#define UCSI_CMD_SET_NTFY_ENABLE(_ctrl_, _ntfys_)                       \
 113{                                                                       \
 114        __UCSI_CMD(_ctrl_, UCSI_SET_NOTIFICATION_ENABLE)                \
 115        (_ctrl_).cmd.data = _ntfys_;                                    \
 116}
 117
 118/* Helper for preparing ucsi_control for GET_CAPABILITY command. */
 119#define UCSI_CMD_GET_CAPABILITY(_ctrl_)                                 \
 120{                                                                       \
 121        __UCSI_CMD(_ctrl_, UCSI_GET_CAPABILITY)                         \
 122}
 123
 124/* Helper for preparing ucsi_control for GET_CONNECTOR_CAPABILITY command. */
 125#define UCSI_CMD_GET_CONNECTOR_CAPABILITY(_ctrl_, _con_)                \
 126{                                                                       \
 127        __UCSI_CMD(_ctrl_, UCSI_GET_CONNECTOR_CAPABILITY)               \
 128        (_ctrl_).cmd.data = _con_;                                      \
 129}
 130
 131/* Helper for preparing ucsi_control for GET_ALTERNATE_MODES command. */
 132#define UCSI_CMD_GET_ALTERNATE_MODES(_ctrl_, _r_, _con_num_, _o_, _num_)\
 133{                                                                       \
 134        __UCSI_CMD((_ctrl_), UCSI_GET_ALTERNATE_MODES)                  \
 135        _ctrl_.alt.recipient = (_r_);                                   \
 136        _ctrl_.alt.con_num = (_con_num_);                               \
 137        _ctrl_.alt.offset = (_o_);                                      \
 138        _ctrl_.alt.num_altmodes = (_num_) - 1;                          \
 139}
 140
 141/* Helper for preparing ucsi_control for GET_CAM_SUPPORTED command. */
 142#define UCSI_CMD_GET_CAM_SUPPORTED(_ctrl_, _con_)                       \
 143{                                                                       \
 144        __UCSI_CMD((_ctrl_), UCSI_GET_CAM_SUPPORTED)                    \
 145        _ctrl_.cmd.data = (_con_);                                      \
 146}
 147
 148/* Helper for preparing ucsi_control for GET_CAM_SUPPORTED command. */
 149#define UCSI_CMD_GET_CURRENT_CAM(_ctrl_, _con_)                 \
 150{                                                                       \
 151        __UCSI_CMD((_ctrl_), UCSI_GET_CURRENT_CAM)                      \
 152        _ctrl_.cmd.data = (_con_);                                      \
 153}
 154
 155/* Helper for preparing ucsi_control for GET_CONNECTOR_STATUS command. */
 156#define UCSI_CMD_GET_CONNECTOR_STATUS(_ctrl_, _con_)                    \
 157{                                                                       \
 158        __UCSI_CMD(_ctrl_, UCSI_GET_CONNECTOR_STATUS)                   \
 159        (_ctrl_).cmd.data = _con_;                                      \
 160}
 161
 162#define __UCSI_ROLE(_ctrl_, _cmd_, _con_num_)                           \
 163{                                                                       \
 164        __UCSI_CMD(_ctrl_, _cmd_)                                       \
 165        (_ctrl_).uor.con_num = _con_num_;                               \
 166        (_ctrl_).uor.role = UCSI_UOR_ROLE_DRP;                          \
 167}
 168
 169/* Helper for preparing ucsi_control for SET_UOR command. */
 170#define UCSI_CMD_SET_UOR(_ctrl_, _con_, _role_)                         \
 171{                                                                       \
 172        __UCSI_ROLE(_ctrl_, UCSI_SET_UOR, (_con_)->num)         \
 173        (_ctrl_).uor.role |= (_role_) == TYPEC_HOST ? UCSI_UOR_ROLE_DFP : \
 174                          UCSI_UOR_ROLE_UFP;                            \
 175}
 176
 177/* Helper for preparing ucsi_control for SET_PDR command. */
 178#define UCSI_CMD_SET_PDR(_ctrl_, _con_, _role_)                 \
 179{                                                                       \
 180        __UCSI_ROLE(_ctrl_, UCSI_SET_PDR, (_con_)->num)         \
 181        (_ctrl_).uor.role |= (_role_) == TYPEC_SOURCE ? UCSI_UOR_ROLE_DFP : \
 182                        UCSI_UOR_ROLE_UFP;                              \
 183}
 184
 185/* Commands */
 186#define UCSI_PPM_RESET                  0x01
 187#define UCSI_CANCEL                     0x02
 188#define UCSI_CONNECTOR_RESET            0x03
 189#define UCSI_ACK_CC_CI                  0x04
 190#define UCSI_SET_NOTIFICATION_ENABLE    0x05
 191#define UCSI_GET_CAPABILITY             0x06
 192#define UCSI_GET_CONNECTOR_CAPABILITY   0x07
 193#define UCSI_SET_UOM                    0x08
 194#define UCSI_SET_UOR                    0x09
 195#define UCSI_SET_PDM                    0x0a
 196#define UCSI_SET_PDR                    0x0b
 197#define UCSI_GET_ALTERNATE_MODES        0x0c
 198#define UCSI_GET_CAM_SUPPORTED          0x0d
 199#define UCSI_GET_CURRENT_CAM            0x0e
 200#define UCSI_SET_NEW_CAM                0x0f
 201#define UCSI_GET_PDOS                   0x10
 202#define UCSI_GET_CABLE_PROPERTY         0x11
 203#define UCSI_GET_CONNECTOR_STATUS       0x12
 204#define UCSI_GET_ERROR_STATUS           0x13
 205
 206/* ACK_CC_CI commands */
 207#define UCSI_ACK_EVENT                  1
 208#define UCSI_ACK_CMD                    2
 209
 210/* Bits for SET_NOTIFICATION_ENABLE command */
 211#define UCSI_ENABLE_NTFY_CMD_COMPLETE           BIT(0)
 212#define UCSI_ENABLE_NTFY_EXT_PWR_SRC_CHANGE     BIT(1)
 213#define UCSI_ENABLE_NTFY_PWR_OPMODE_CHANGE      BIT(2)
 214#define UCSI_ENABLE_NTFY_CAP_CHANGE             BIT(5)
 215#define UCSI_ENABLE_NTFY_PWR_LEVEL_CHANGE       BIT(6)
 216#define UCSI_ENABLE_NTFY_PD_RESET_COMPLETE      BIT(7)
 217#define UCSI_ENABLE_NTFY_CAM_CHANGE             BIT(8)
 218#define UCSI_ENABLE_NTFY_BAT_STATUS_CHANGE      BIT(9)
 219#define UCSI_ENABLE_NTFY_PARTNER_CHANGE         BIT(11)
 220#define UCSI_ENABLE_NTFY_PWR_DIR_CHANGE         BIT(12)
 221#define UCSI_ENABLE_NTFY_CONNECTOR_CHANGE       BIT(14)
 222#define UCSI_ENABLE_NTFY_ERROR                  BIT(15)
 223#define UCSI_ENABLE_NTFY_ALL                    0xdbe7
 224
 225/* Error information returned by PPM in response to GET_ERROR_STATUS command. */
 226#define UCSI_ERROR_UNREGONIZED_CMD              BIT(0)
 227#define UCSI_ERROR_INVALID_CON_NUM              BIT(1)
 228#define UCSI_ERROR_INVALID_CMD_ARGUMENT         BIT(2)
 229#define UCSI_ERROR_INCOMPATIBLE_PARTNER         BIT(3)
 230#define UCSI_ERROR_CC_COMMUNICATION_ERR         BIT(4)
 231#define UCSI_ERROR_DEAD_BATTERY                 BIT(5)
 232#define UCSI_ERROR_CONTRACT_NEGOTIATION_FAIL    BIT(6)
 233
 234/* Data structure filled by PPM in response to GET_CAPABILITY command. */
 235struct ucsi_capability {
 236        u32 attributes;
 237#define UCSI_CAP_ATTR_DISABLE_STATE             BIT(0)
 238#define UCSI_CAP_ATTR_BATTERY_CHARGING          BIT(1)
 239#define UCSI_CAP_ATTR_USB_PD                    BIT(2)
 240#define UCSI_CAP_ATTR_TYPEC_CURRENT             BIT(6)
 241#define UCSI_CAP_ATTR_POWER_AC_SUPPLY           BIT(8)
 242#define UCSI_CAP_ATTR_POWER_OTHER               BIT(10)
 243#define UCSI_CAP_ATTR_POWER_VBUS                BIT(14)
 244        u32 num_connectors:8;
 245        u32 features:24;
 246#define UCSI_CAP_SET_UOM                        BIT(0)
 247#define UCSI_CAP_SET_PDM                        BIT(1)
 248#define UCSI_CAP_ALT_MODE_DETAILS               BIT(2)
 249#define UCSI_CAP_ALT_MODE_OVERRIDE              BIT(3)
 250#define UCSI_CAP_PDO_DETAILS                    BIT(4)
 251#define UCSI_CAP_CABLE_DETAILS                  BIT(5)
 252#define UCSI_CAP_EXT_SUPPLY_NOTIFICATIONS       BIT(6)
 253#define UCSI_CAP_PD_RESET                       BIT(7)
 254        u8 num_alt_modes;
 255        u8 reserved;
 256        u16 bc_version;
 257        u16 pd_version;
 258        u16 typec_version;
 259} __packed;
 260
 261/* Data structure filled by PPM in response to GET_CONNECTOR_CAPABILITY cmd. */
 262struct ucsi_connector_capability {
 263        u8 op_mode;
 264#define UCSI_CONCAP_OPMODE_DFP                  BIT(0)
 265#define UCSI_CONCAP_OPMODE_UFP                  BIT(1)
 266#define UCSI_CONCAP_OPMODE_DRP                  BIT(2)
 267#define UCSI_CONCAP_OPMODE_AUDIO_ACCESSORY      BIT(3)
 268#define UCSI_CONCAP_OPMODE_DEBUG_ACCESSORY      BIT(4)
 269#define UCSI_CONCAP_OPMODE_USB2                 BIT(5)
 270#define UCSI_CONCAP_OPMODE_USB3                 BIT(6)
 271#define UCSI_CONCAP_OPMODE_ALT_MODE             BIT(7)
 272        u8 provider:1;
 273        u8 consumer:1;
 274        u8:6; /* reserved */
 275} __packed;
 276
 277struct ucsi_altmode {
 278        u16 svid;
 279        u32 mid;
 280} __packed;
 281
 282/* Data structure filled by PPM in response to GET_CABLE_PROPERTY command. */
 283struct ucsi_cable_property {
 284        u16 speed_supported;
 285        u8 current_capability;
 286        u8 vbus_in_cable:1;
 287        u8 active_cable:1;
 288        u8 directionality:1;
 289        u8 plug_type:2;
 290#define UCSI_CABLE_PROPERTY_PLUG_TYPE_A         0
 291#define UCSI_CABLE_PROPERTY_PLUG_TYPE_B         1
 292#define UCSI_CABLE_PROPERTY_PLUG_TYPE_C         2
 293#define UCSI_CABLE_PROPERTY_PLUG_OTHER          3
 294        u8 mode_support:1;
 295        u8:2; /* reserved */
 296        u8 latency:4;
 297        u8:4; /* reserved */
 298} __packed;
 299
 300/* Data structure filled by PPM in response to GET_CONNECTOR_STATUS command. */
 301struct ucsi_connector_status {
 302        u16 change;
 303#define UCSI_CONSTAT_EXT_SUPPLY_CHANGE          BIT(1)
 304#define UCSI_CONSTAT_POWER_OPMODE_CHANGE        BIT(2)
 305#define UCSI_CONSTAT_PDOS_CHANGE                BIT(5)
 306#define UCSI_CONSTAT_POWER_LEVEL_CHANGE         BIT(6)
 307#define UCSI_CONSTAT_PD_RESET_COMPLETE          BIT(7)
 308#define UCSI_CONSTAT_CAM_CHANGE                 BIT(8)
 309#define UCSI_CONSTAT_BC_CHANGE                  BIT(9)
 310#define UCSI_CONSTAT_PARTNER_CHANGE             BIT(11)
 311#define UCSI_CONSTAT_POWER_DIR_CHANGE           BIT(12)
 312#define UCSI_CONSTAT_CONNECT_CHANGE             BIT(14)
 313#define UCSI_CONSTAT_ERROR                      BIT(15)
 314        u16 pwr_op_mode:3;
 315#define UCSI_CONSTAT_PWR_OPMODE_NONE            0
 316#define UCSI_CONSTAT_PWR_OPMODE_DEFAULT         1
 317#define UCSI_CONSTAT_PWR_OPMODE_BC              2
 318#define UCSI_CONSTAT_PWR_OPMODE_PD              3
 319#define UCSI_CONSTAT_PWR_OPMODE_TYPEC1_5        4
 320#define UCSI_CONSTAT_PWR_OPMODE_TYPEC3_0        5
 321        u16 connected:1;
 322        u16 pwr_dir:1;
 323        u16 partner_flags:8;
 324#define UCSI_CONSTAT_PARTNER_FLAG_USB           BIT(0)
 325#define UCSI_CONSTAT_PARTNER_FLAG_ALT_MODE      BIT(1)
 326        u16 partner_type:3;
 327#define UCSI_CONSTAT_PARTNER_TYPE_DFP           1
 328#define UCSI_CONSTAT_PARTNER_TYPE_UFP           2
 329#define UCSI_CONSTAT_PARTNER_TYPE_CABLE         3 /* Powered Cable */
 330#define UCSI_CONSTAT_PARTNER_TYPE_CABLE_AND_UFP 4 /* Powered Cable */
 331#define UCSI_CONSTAT_PARTNER_TYPE_DEBUG         5
 332#define UCSI_CONSTAT_PARTNER_TYPE_AUDIO         6
 333        u32 request_data_obj;
 334        u8 bc_status:2;
 335#define UCSI_CONSTAT_BC_NOT_CHARGING            0
 336#define UCSI_CONSTAT_BC_NOMINAL_CHARGING        1
 337#define UCSI_CONSTAT_BC_SLOW_CHARGING           2
 338#define UCSI_CONSTAT_BC_TRICKLE_CHARGING        3
 339        u8 provider_cap_limit_reason:4;
 340#define UCSI_CONSTAT_CAP_PWR_LOWERED            0
 341#define UCSI_CONSTAT_CAP_PWR_BUDGET_LIMIT       1
 342        u8:2; /* reserved */
 343} __packed;
 344
 345/* -------------------------------------------------------------------------- */
 346
 347struct ucsi;
 348
 349struct ucsi_data {
 350        u16 version;
 351        u16 reserved;
 352        union {
 353                u32 raw_cci;
 354                struct ucsi_cci cci;
 355        };
 356        struct ucsi_control ctrl;
 357        u32 message_in[4];
 358        u32 message_out[4];
 359} __packed;
 360
 361/*
 362 * struct ucsi_ppm - Interface to UCSI Platform Policy Manager
 363 * @data: memory location to the UCSI data structures
 364 * @cmd: UCSI command execution routine
 365 * @sync: Refresh UCSI mailbox (the data structures)
 366 */
 367struct ucsi_ppm {
 368        struct ucsi_data *data;
 369        int (*cmd)(struct ucsi_ppm *, struct ucsi_control *);
 370        int (*sync)(struct ucsi_ppm *);
 371};
 372
 373struct ucsi *ucsi_register_ppm(struct device *dev, struct ucsi_ppm *ppm);
 374void ucsi_unregister_ppm(struct ucsi *ucsi);
 375void ucsi_notify(struct ucsi *ucsi);
 376
 377/* -------------------------------------------------------------------------- */
 378
 379enum ucsi_status {
 380        UCSI_IDLE = 0,
 381        UCSI_BUSY,
 382        UCSI_ERROR,
 383};
 384
 385struct ucsi {
 386        struct device *dev;
 387        struct ucsi_ppm *ppm;
 388
 389        enum ucsi_status status;
 390        struct completion complete;
 391        struct ucsi_capability cap;
 392        struct ucsi_connector *connector;
 393
 394        struct work_struct work;
 395
 396        /* PPM Communication lock */
 397        struct mutex ppm_lock;
 398
 399        /* PPM communication flags */
 400        unsigned long flags;
 401#define EVENT_PENDING   0
 402#define COMMAND_PENDING 1
 403#define ACK_PENDING     2
 404};
 405
 406#define UCSI_MAX_SVID           5
 407#define UCSI_MAX_ALTMODES       (UCSI_MAX_SVID * 6)
 408
 409struct ucsi_connector {
 410        int num;
 411
 412        struct ucsi *ucsi;
 413        struct mutex lock; /* port lock */
 414        struct work_struct work;
 415        struct completion complete;
 416
 417        struct typec_port *port;
 418        struct typec_partner *partner;
 419
 420        struct typec_altmode *port_altmode[UCSI_MAX_ALTMODES];
 421        struct typec_altmode *partner_altmode[UCSI_MAX_ALTMODES];
 422
 423        struct typec_capability typec_cap;
 424
 425        struct ucsi_connector_status status;
 426        struct ucsi_connector_capability cap;
 427};
 428
 429int ucsi_send_command(struct ucsi *ucsi, struct ucsi_control *ctrl,
 430                      void *retval, size_t size);
 431
 432void ucsi_altmode_update_active(struct ucsi_connector *con);
 433int ucsi_resume(struct ucsi *ucsi);
 434
 435#if IS_ENABLED(CONFIG_TYPEC_DP_ALTMODE)
 436struct typec_altmode *
 437ucsi_register_displayport(struct ucsi_connector *con,
 438                          bool override, int offset,
 439                          struct typec_altmode_desc *desc);
 440
 441void ucsi_displayport_remove_partner(struct typec_altmode *adev);
 442
 443#else
 444static inline struct typec_altmode *
 445ucsi_register_displayport(struct ucsi_connector *con,
 446                          bool override, int offset,
 447                          struct typec_altmode_desc *desc)
 448{
 449        return NULL;
 450}
 451
 452static inline void
 453ucsi_displayport_remove_partner(struct typec_altmode *adev) { }
 454#endif /* CONFIG_TYPEC_DP_ALTMODE */
 455
 456#endif /* __DRIVER_USB_TYPEC_UCSI_H */
 457