linux/sound/soc/intel/boards/bytcht_es8316.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-only
   2/*
   3 *  bytcht_es8316.c - ASoc Machine driver for Intel Baytrail/Cherrytrail
   4 *                    platforms with Everest ES8316 SoC
   5 *
   6 *  Copyright (C) 2017 Endless Mobile, Inc.
   7 *  Authors: David Yang <yangxiaohua@everest-semi.com>,
   8 *           Daniel Drake <drake@endlessm.com>
   9 *
  10 *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  11 *
  12 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  13 */
  14#include <linux/acpi.h>
  15#include <linux/clk.h>
  16#include <linux/device.h>
  17#include <linux/dmi.h>
  18#include <linux/gpio/consumer.h>
  19#include <linux/i2c.h>
  20#include <linux/init.h>
  21#include <linux/input.h>
  22#include <linux/module.h>
  23#include <linux/platform_device.h>
  24#include <linux/slab.h>
  25#include <sound/jack.h>
  26#include <sound/pcm.h>
  27#include <sound/pcm_params.h>
  28#include <sound/soc.h>
  29#include <sound/soc-acpi.h>
  30#include "../atom/sst-atom-controls.h"
  31#include "../common/sst-dsp.h"
  32#include "../common/soc-intel-quirks.h"
  33
  34/* jd-inv + terminating entry */
  35#define MAX_NO_PROPS 2
  36
  37struct byt_cht_es8316_private {
  38        struct clk *mclk;
  39        struct snd_soc_jack jack;
  40        struct gpio_desc *speaker_en_gpio;
  41        bool speaker_en;
  42};
  43
  44enum {
  45        BYT_CHT_ES8316_INTMIC_IN1_MAP,
  46        BYT_CHT_ES8316_INTMIC_IN2_MAP,
  47};
  48
  49#define BYT_CHT_ES8316_MAP(quirk)               ((quirk) & GENMASK(3, 0))
  50#define BYT_CHT_ES8316_SSP0                     BIT(16)
  51#define BYT_CHT_ES8316_MONO_SPEAKER             BIT(17)
  52#define BYT_CHT_ES8316_JD_INVERTED              BIT(18)
  53
  54static unsigned long quirk;
  55
  56static int quirk_override = -1;
  57module_param_named(quirk, quirk_override, int, 0444);
  58MODULE_PARM_DESC(quirk, "Board-specific quirk override");
  59
  60static void log_quirks(struct device *dev)
  61{
  62        if (BYT_CHT_ES8316_MAP(quirk) == BYT_CHT_ES8316_INTMIC_IN1_MAP)
  63                dev_info(dev, "quirk IN1_MAP enabled");
  64        if (BYT_CHT_ES8316_MAP(quirk) == BYT_CHT_ES8316_INTMIC_IN2_MAP)
  65                dev_info(dev, "quirk IN2_MAP enabled");
  66        if (quirk & BYT_CHT_ES8316_SSP0)
  67                dev_info(dev, "quirk SSP0 enabled");
  68        if (quirk & BYT_CHT_ES8316_MONO_SPEAKER)
  69                dev_info(dev, "quirk MONO_SPEAKER enabled\n");
  70        if (quirk & BYT_CHT_ES8316_JD_INVERTED)
  71                dev_info(dev, "quirk JD_INVERTED enabled\n");
  72}
  73
  74static int byt_cht_es8316_speaker_power_event(struct snd_soc_dapm_widget *w,
  75        struct snd_kcontrol *kcontrol, int event)
  76{
  77        struct snd_soc_card *card = w->dapm->card;
  78        struct byt_cht_es8316_private *priv = snd_soc_card_get_drvdata(card);
  79
  80        if (SND_SOC_DAPM_EVENT_ON(event))
  81                priv->speaker_en = true;
  82        else
  83                priv->speaker_en = false;
  84
  85        gpiod_set_value_cansleep(priv->speaker_en_gpio, priv->speaker_en);
  86
  87        return 0;
  88}
  89
  90static const struct snd_soc_dapm_widget byt_cht_es8316_widgets[] = {
  91        SND_SOC_DAPM_SPK("Speaker", NULL),
  92        SND_SOC_DAPM_HP("Headphone", NULL),
  93        SND_SOC_DAPM_MIC("Headset Mic", NULL),
  94        SND_SOC_DAPM_MIC("Internal Mic", NULL),
  95
  96        SND_SOC_DAPM_SUPPLY("Speaker Power", SND_SOC_NOPM, 0, 0,
  97                            byt_cht_es8316_speaker_power_event,
  98                            SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU),
  99};
 100
 101static const struct snd_soc_dapm_route byt_cht_es8316_audio_map[] = {
 102        {"Headphone", NULL, "HPOL"},
 103        {"Headphone", NULL, "HPOR"},
 104
 105        /*
 106         * There is no separate speaker output instead the speakers are muxed to
 107         * the HP outputs. The mux is controlled by the "Speaker Power" supply.
 108         */
 109        {"Speaker", NULL, "HPOL"},
 110        {"Speaker", NULL, "HPOR"},
 111        {"Speaker", NULL, "Speaker Power"},
 112};
 113
 114static const struct snd_soc_dapm_route byt_cht_es8316_intmic_in1_map[] = {
 115        {"MIC1", NULL, "Internal Mic"},
 116        {"MIC2", NULL, "Headset Mic"},
 117};
 118
 119static const struct snd_soc_dapm_route byt_cht_es8316_intmic_in2_map[] = {
 120        {"MIC2", NULL, "Internal Mic"},
 121        {"MIC1", NULL, "Headset Mic"},
 122};
 123
 124static const struct snd_soc_dapm_route byt_cht_es8316_ssp0_map[] = {
 125        {"Playback", NULL, "ssp0 Tx"},
 126        {"ssp0 Tx", NULL, "modem_out"},
 127        {"modem_in", NULL, "ssp0 Rx"},
 128        {"ssp0 Rx", NULL, "Capture"},
 129};
 130
 131static const struct snd_soc_dapm_route byt_cht_es8316_ssp2_map[] = {
 132        {"Playback", NULL, "ssp2 Tx"},
 133        {"ssp2 Tx", NULL, "codec_out0"},
 134        {"ssp2 Tx", NULL, "codec_out1"},
 135        {"codec_in0", NULL, "ssp2 Rx" },
 136        {"codec_in1", NULL, "ssp2 Rx" },
 137        {"ssp2 Rx", NULL, "Capture"},
 138};
 139
 140static const struct snd_kcontrol_new byt_cht_es8316_controls[] = {
 141        SOC_DAPM_PIN_SWITCH("Speaker"),
 142        SOC_DAPM_PIN_SWITCH("Headphone"),
 143        SOC_DAPM_PIN_SWITCH("Headset Mic"),
 144        SOC_DAPM_PIN_SWITCH("Internal Mic"),
 145};
 146
 147static struct snd_soc_jack_pin byt_cht_es8316_jack_pins[] = {
 148        {
 149                .pin    = "Headphone",
 150                .mask   = SND_JACK_HEADPHONE,
 151        },
 152        {
 153                .pin    = "Headset Mic",
 154                .mask   = SND_JACK_MICROPHONE,
 155        },
 156};
 157
 158static int byt_cht_es8316_init(struct snd_soc_pcm_runtime *runtime)
 159{
 160        struct snd_soc_component *codec = runtime->codec_dai->component;
 161        struct snd_soc_card *card = runtime->card;
 162        struct byt_cht_es8316_private *priv = snd_soc_card_get_drvdata(card);
 163        const struct snd_soc_dapm_route *custom_map;
 164        int num_routes;
 165        int ret;
 166
 167        card->dapm.idle_bias_off = true;
 168
 169        switch (BYT_CHT_ES8316_MAP(quirk)) {
 170        case BYT_CHT_ES8316_INTMIC_IN1_MAP:
 171        default:
 172                custom_map = byt_cht_es8316_intmic_in1_map;
 173                num_routes = ARRAY_SIZE(byt_cht_es8316_intmic_in1_map);
 174                break;
 175        case BYT_CHT_ES8316_INTMIC_IN2_MAP:
 176                custom_map = byt_cht_es8316_intmic_in2_map;
 177                num_routes = ARRAY_SIZE(byt_cht_es8316_intmic_in2_map);
 178                break;
 179        }
 180        ret = snd_soc_dapm_add_routes(&card->dapm, custom_map, num_routes);
 181        if (ret)
 182                return ret;
 183
 184        if (quirk & BYT_CHT_ES8316_SSP0) {
 185                custom_map = byt_cht_es8316_ssp0_map;
 186                num_routes = ARRAY_SIZE(byt_cht_es8316_ssp0_map);
 187        } else {
 188                custom_map = byt_cht_es8316_ssp2_map;
 189                num_routes = ARRAY_SIZE(byt_cht_es8316_ssp2_map);
 190        }
 191        ret = snd_soc_dapm_add_routes(&card->dapm, custom_map, num_routes);
 192        if (ret)
 193                return ret;
 194
 195        /*
 196         * The firmware might enable the clock at boot (this information
 197         * may or may not be reflected in the enable clock register).
 198         * To change the rate we must disable the clock first to cover these
 199         * cases. Due to common clock framework restrictions that do not allow
 200         * to disable a clock that has not been enabled, we need to enable
 201         * the clock first.
 202         */
 203        ret = clk_prepare_enable(priv->mclk);
 204        if (!ret)
 205                clk_disable_unprepare(priv->mclk);
 206
 207        ret = clk_set_rate(priv->mclk, 19200000);
 208        if (ret)
 209                dev_err(card->dev, "unable to set MCLK rate\n");
 210
 211        ret = clk_prepare_enable(priv->mclk);
 212        if (ret)
 213                dev_err(card->dev, "unable to enable MCLK\n");
 214
 215        ret = snd_soc_dai_set_sysclk(runtime->codec_dai, 0, 19200000,
 216                                     SND_SOC_CLOCK_IN);
 217        if (ret < 0) {
 218                dev_err(card->dev, "can't set codec clock %d\n", ret);
 219                return ret;
 220        }
 221
 222        ret = snd_soc_card_jack_new(card, "Headset",
 223                                    SND_JACK_HEADSET | SND_JACK_BTN_0,
 224                                    &priv->jack, byt_cht_es8316_jack_pins,
 225                                    ARRAY_SIZE(byt_cht_es8316_jack_pins));
 226        if (ret) {
 227                dev_err(card->dev, "jack creation failed %d\n", ret);
 228                return ret;
 229        }
 230
 231        snd_jack_set_key(priv->jack.jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
 232        snd_soc_component_set_jack(codec, &priv->jack, NULL);
 233
 234        return 0;
 235}
 236
 237static const struct snd_soc_pcm_stream byt_cht_es8316_dai_params = {
 238        .formats = SNDRV_PCM_FMTBIT_S24_LE,
 239        .rate_min = 48000,
 240        .rate_max = 48000,
 241        .channels_min = 2,
 242        .channels_max = 2,
 243};
 244
 245static int byt_cht_es8316_codec_fixup(struct snd_soc_pcm_runtime *rtd,
 246                            struct snd_pcm_hw_params *params)
 247{
 248        struct snd_interval *rate = hw_param_interval(params,
 249                        SNDRV_PCM_HW_PARAM_RATE);
 250        struct snd_interval *channels = hw_param_interval(params,
 251                                                SNDRV_PCM_HW_PARAM_CHANNELS);
 252        int ret, bits;
 253
 254        /* The DSP will covert the FE rate to 48k, stereo */
 255        rate->min = rate->max = 48000;
 256        channels->min = channels->max = 2;
 257
 258        if (quirk & BYT_CHT_ES8316_SSP0) {
 259                /* set SSP0 to 16-bit */
 260                params_set_format(params, SNDRV_PCM_FORMAT_S16_LE);
 261                bits = 16;
 262        } else {
 263                /* set SSP2 to 24-bit */
 264                params_set_format(params, SNDRV_PCM_FORMAT_S24_LE);
 265                bits = 24;
 266        }
 267
 268        /*
 269         * Default mode for SSP configuration is TDM 4 slot, override config
 270         * with explicit setting to I2S 2ch 24-bit. The word length is set with
 271         * dai_set_tdm_slot() since there is no other API exposed
 272         */
 273        ret = snd_soc_dai_set_fmt(rtd->cpu_dai,
 274                                SND_SOC_DAIFMT_I2S     |
 275                                SND_SOC_DAIFMT_NB_NF   |
 276                                SND_SOC_DAIFMT_CBS_CFS
 277                );
 278        if (ret < 0) {
 279                dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret);
 280                return ret;
 281        }
 282
 283        ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, bits);
 284        if (ret < 0) {
 285                dev_err(rtd->dev, "can't set I2S config, err %d\n", ret);
 286                return ret;
 287        }
 288
 289        return 0;
 290}
 291
 292static int byt_cht_es8316_aif1_startup(struct snd_pcm_substream *substream)
 293{
 294        return snd_pcm_hw_constraint_single(substream->runtime,
 295                        SNDRV_PCM_HW_PARAM_RATE, 48000);
 296}
 297
 298static const struct snd_soc_ops byt_cht_es8316_aif1_ops = {
 299        .startup = byt_cht_es8316_aif1_startup,
 300};
 301
 302SND_SOC_DAILINK_DEF(dummy,
 303        DAILINK_COMP_ARRAY(COMP_DUMMY()));
 304
 305SND_SOC_DAILINK_DEF(media,
 306        DAILINK_COMP_ARRAY(COMP_CPU("media-cpu-dai")));
 307
 308SND_SOC_DAILINK_DEF(deepbuffer,
 309        DAILINK_COMP_ARRAY(COMP_CPU("deepbuffer-cpu-dai")));
 310
 311SND_SOC_DAILINK_DEF(ssp2_port,
 312        DAILINK_COMP_ARRAY(COMP_CPU("ssp2-port")));
 313SND_SOC_DAILINK_DEF(ssp2_codec,
 314        DAILINK_COMP_ARRAY(COMP_CODEC("i2c-ESSX8316:00", "ES8316 HiFi")));
 315
 316SND_SOC_DAILINK_DEF(platform,
 317        DAILINK_COMP_ARRAY(COMP_PLATFORM("sst-mfld-platform")));
 318
 319static struct snd_soc_dai_link byt_cht_es8316_dais[] = {
 320        [MERR_DPCM_AUDIO] = {
 321                .name = "Audio Port",
 322                .stream_name = "Audio",
 323                .nonatomic = true,
 324                .dynamic = 1,
 325                .dpcm_playback = 1,
 326                .dpcm_capture = 1,
 327                .ops = &byt_cht_es8316_aif1_ops,
 328                SND_SOC_DAILINK_REG(media, dummy, platform),
 329        },
 330
 331        [MERR_DPCM_DEEP_BUFFER] = {
 332                .name = "Deep-Buffer Audio Port",
 333                .stream_name = "Deep-Buffer Audio",
 334                .nonatomic = true,
 335                .dynamic = 1,
 336                .dpcm_playback = 1,
 337                .ops = &byt_cht_es8316_aif1_ops,
 338                SND_SOC_DAILINK_REG(deepbuffer, dummy, platform),
 339        },
 340
 341                /* back ends */
 342        {
 343                /* Only SSP2 has been tested here, so BYT-CR platforms that
 344                 * require SSP0 will not work.
 345                 */
 346                .name = "SSP2-Codec",
 347                .id = 0,
 348                .no_pcm = 1,
 349                .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
 350                                                | SND_SOC_DAIFMT_CBS_CFS,
 351                .be_hw_params_fixup = byt_cht_es8316_codec_fixup,
 352                .nonatomic = true,
 353                .dpcm_playback = 1,
 354                .dpcm_capture = 1,
 355                .init = byt_cht_es8316_init,
 356                SND_SOC_DAILINK_REG(ssp2_port, ssp2_codec, platform),
 357        },
 358};
 359
 360
 361/* SoC card */
 362static char codec_name[SND_ACPI_I2C_ID_LEN];
 363static char long_name[50]; /* = "bytcht-es8316-*-spk-*-mic" */
 364
 365static int byt_cht_es8316_suspend(struct snd_soc_card *card)
 366{
 367        struct snd_soc_component *component;
 368
 369        for_each_card_components(card, component) {
 370                if (!strcmp(component->name, codec_name)) {
 371                        dev_dbg(component->dev, "disabling jack detect before suspend\n");
 372                        snd_soc_component_set_jack(component, NULL, NULL);
 373                        break;
 374                }
 375        }
 376
 377        return 0;
 378}
 379
 380static int byt_cht_es8316_resume(struct snd_soc_card *card)
 381{
 382        struct byt_cht_es8316_private *priv = snd_soc_card_get_drvdata(card);
 383        struct snd_soc_component *component;
 384
 385        for_each_card_components(card, component) {
 386                if (!strcmp(component->name, codec_name)) {
 387                        dev_dbg(component->dev, "re-enabling jack detect after resume\n");
 388                        snd_soc_component_set_jack(component, &priv->jack, NULL);
 389                        break;
 390                }
 391        }
 392
 393        /*
 394         * Some Cherry Trail boards with an ES8316 codec have a bug in their
 395         * ACPI tables where the MSSL1680 touchscreen's _PS0 and _PS3 methods
 396         * wrongly also set the speaker-enable GPIO to 1/0. Testing has shown
 397         * that this really is a bug and the GPIO has no influence on the
 398         * touchscreen at all.
 399         *
 400         * The silead.c touchscreen driver does not support runtime suspend, so
 401         * the GPIO can only be changed underneath us during a system suspend.
 402         * This resume() function runs from a pm complete() callback, and thus
 403         * is guaranteed to run after the touchscreen driver/ACPI-subsys has
 404         * brought the touchscreen back up again (and thus changed the GPIO).
 405         *
 406         * So to work around this we pass GPIOD_FLAGS_BIT_NONEXCLUSIVE when
 407         * requesting the GPIO and we set its value here to undo any changes
 408         * done by the touchscreen's broken _PS0 ACPI method.
 409         */
 410        gpiod_set_value_cansleep(priv->speaker_en_gpio, priv->speaker_en);
 411
 412        return 0;
 413}
 414
 415static struct snd_soc_card byt_cht_es8316_card = {
 416        .name = "bytcht-es8316",
 417        .owner = THIS_MODULE,
 418        .dai_link = byt_cht_es8316_dais,
 419        .num_links = ARRAY_SIZE(byt_cht_es8316_dais),
 420        .dapm_widgets = byt_cht_es8316_widgets,
 421        .num_dapm_widgets = ARRAY_SIZE(byt_cht_es8316_widgets),
 422        .dapm_routes = byt_cht_es8316_audio_map,
 423        .num_dapm_routes = ARRAY_SIZE(byt_cht_es8316_audio_map),
 424        .controls = byt_cht_es8316_controls,
 425        .num_controls = ARRAY_SIZE(byt_cht_es8316_controls),
 426        .fully_routed = true,
 427        .suspend_pre = byt_cht_es8316_suspend,
 428        .resume_post = byt_cht_es8316_resume,
 429};
 430
 431static const struct acpi_gpio_params first_gpio = { 0, 0, false };
 432
 433static const struct acpi_gpio_mapping byt_cht_es8316_gpios[] = {
 434        { "speaker-enable-gpios", &first_gpio, 1 },
 435        { },
 436};
 437
 438/* Please keep this list alphabetically sorted */
 439static const struct dmi_system_id byt_cht_es8316_quirk_table[] = {
 440        {       /* Irbis NB41 */
 441                .matches = {
 442                        DMI_MATCH(DMI_SYS_VENDOR, "IRBIS"),
 443                        DMI_MATCH(DMI_PRODUCT_NAME, "NB41"),
 444                },
 445                .driver_data = (void *)(BYT_CHT_ES8316_INTMIC_IN2_MAP
 446                                        | BYT_CHT_ES8316_JD_INVERTED),
 447        },
 448        {       /* Teclast X98 Plus II */
 449                .matches = {
 450                        DMI_MATCH(DMI_SYS_VENDOR, "TECLAST"),
 451                        DMI_MATCH(DMI_PRODUCT_NAME, "X98 Plus II"),
 452                },
 453                .driver_data = (void *)(BYT_CHT_ES8316_INTMIC_IN1_MAP
 454                                        | BYT_CHT_ES8316_JD_INVERTED),
 455        },
 456        {}
 457};
 458
 459static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev)
 460{
 461        static const char * const mic_name[] = { "in1", "in2" };
 462        struct property_entry props[MAX_NO_PROPS] = {};
 463        struct byt_cht_es8316_private *priv;
 464        const struct dmi_system_id *dmi_id;
 465        struct device *dev = &pdev->dev;
 466        struct snd_soc_acpi_mach *mach;
 467        const char *platform_name;
 468        struct acpi_device *adev;
 469        struct device *codec_dev;
 470        unsigned int cnt = 0;
 471        int dai_index = 0;
 472        int i;
 473        int ret = 0;
 474
 475        priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 476        if (!priv)
 477                return -ENOMEM;
 478
 479        mach = dev->platform_data;
 480        /* fix index of codec dai */
 481        for (i = 0; i < ARRAY_SIZE(byt_cht_es8316_dais); i++) {
 482                if (!strcmp(byt_cht_es8316_dais[i].codecs->name,
 483                            "i2c-ESSX8316:00")) {
 484                        dai_index = i;
 485                        break;
 486                }
 487        }
 488
 489        /* fixup codec name based on HID */
 490        adev = acpi_dev_get_first_match_dev(mach->id, NULL, -1);
 491        if (adev) {
 492                snprintf(codec_name, sizeof(codec_name),
 493                         "i2c-%s", acpi_dev_name(adev));
 494                put_device(&adev->dev);
 495                byt_cht_es8316_dais[dai_index].codecs->name = codec_name;
 496        }
 497
 498        /* override plaform name, if required */
 499        byt_cht_es8316_card.dev = dev;
 500        platform_name = mach->mach_params.platform;
 501
 502        ret = snd_soc_fixup_dai_links_platform_name(&byt_cht_es8316_card,
 503                                                    platform_name);
 504        if (ret)
 505                return ret;
 506
 507        /* Check for BYTCR or other platform and setup quirks */
 508        dmi_id = dmi_first_match(byt_cht_es8316_quirk_table);
 509        if (dmi_id) {
 510                quirk = (unsigned long)dmi_id->driver_data;
 511        } else if (soc_intel_is_byt() &&
 512                   mach->mach_params.acpi_ipc_irq_index == 0) {
 513                /* On BYTCR default to SSP0, internal-mic-in2-map, mono-spk */
 514                quirk = BYT_CHT_ES8316_SSP0 | BYT_CHT_ES8316_INTMIC_IN2_MAP |
 515                        BYT_CHT_ES8316_MONO_SPEAKER;
 516        } else {
 517                /* Others default to internal-mic-in1-map, mono-speaker */
 518                quirk = BYT_CHT_ES8316_INTMIC_IN1_MAP |
 519                        BYT_CHT_ES8316_MONO_SPEAKER;
 520        }
 521        if (quirk_override != -1) {
 522                dev_info(dev, "Overriding quirk 0x%x => 0x%x\n",
 523                         (unsigned int)quirk,
 524                         quirk_override);
 525                quirk = quirk_override;
 526        }
 527        log_quirks(dev);
 528
 529        if (quirk & BYT_CHT_ES8316_SSP0)
 530                byt_cht_es8316_dais[dai_index].cpus->dai_name = "ssp0-port";
 531
 532        /* get the clock */
 533        priv->mclk = devm_clk_get(dev, "pmc_plt_clk_3");
 534        if (IS_ERR(priv->mclk)) {
 535                ret = PTR_ERR(priv->mclk);
 536                dev_err(dev, "clk_get pmc_plt_clk_3 failed: %d\n", ret);
 537                return ret;
 538        }
 539
 540        /* get speaker enable GPIO */
 541        codec_dev = bus_find_device_by_name(&i2c_bus_type, NULL, codec_name);
 542        if (!codec_dev)
 543                return -EPROBE_DEFER;
 544
 545        if (quirk & BYT_CHT_ES8316_JD_INVERTED)
 546                props[cnt++] = PROPERTY_ENTRY_BOOL("everest,jack-detect-inverted");
 547
 548        if (cnt) {
 549                ret = device_add_properties(codec_dev, props);
 550                if (ret)
 551                        return ret;
 552        }
 553
 554        devm_acpi_dev_add_driver_gpios(codec_dev, byt_cht_es8316_gpios);
 555        priv->speaker_en_gpio =
 556                gpiod_get_index(codec_dev, "speaker-enable", 0,
 557                                /* see comment in byt_cht_es8316_resume */
 558                                GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_NONEXCLUSIVE);
 559        put_device(codec_dev);
 560
 561        if (IS_ERR(priv->speaker_en_gpio)) {
 562                ret = PTR_ERR(priv->speaker_en_gpio);
 563                switch (ret) {
 564                case -ENOENT:
 565                        priv->speaker_en_gpio = NULL;
 566                        break;
 567                default:
 568                        dev_err(dev, "get speaker GPIO failed: %d\n", ret);
 569                        /* fall through */
 570                case -EPROBE_DEFER:
 571                        return ret;
 572                }
 573        }
 574
 575        /* register the soc card */
 576        snprintf(long_name, sizeof(long_name), "bytcht-es8316-%s-spk-%s-mic",
 577                 (quirk & BYT_CHT_ES8316_MONO_SPEAKER) ? "mono" : "stereo",
 578                 mic_name[BYT_CHT_ES8316_MAP(quirk)]);
 579        byt_cht_es8316_card.long_name = long_name;
 580        snd_soc_card_set_drvdata(&byt_cht_es8316_card, priv);
 581
 582        ret = devm_snd_soc_register_card(dev, &byt_cht_es8316_card);
 583        if (ret) {
 584                gpiod_put(priv->speaker_en_gpio);
 585                dev_err(dev, "snd_soc_register_card failed: %d\n", ret);
 586                return ret;
 587        }
 588        platform_set_drvdata(pdev, &byt_cht_es8316_card);
 589        return 0;
 590}
 591
 592static int snd_byt_cht_es8316_mc_remove(struct platform_device *pdev)
 593{
 594        struct snd_soc_card *card = platform_get_drvdata(pdev);
 595        struct byt_cht_es8316_private *priv = snd_soc_card_get_drvdata(card);
 596
 597        gpiod_put(priv->speaker_en_gpio);
 598        return 0;
 599}
 600
 601static struct platform_driver snd_byt_cht_es8316_mc_driver = {
 602        .driver = {
 603                .name = "bytcht_es8316",
 604        },
 605        .probe = snd_byt_cht_es8316_mc_probe,
 606        .remove = snd_byt_cht_es8316_mc_remove,
 607};
 608
 609module_platform_driver(snd_byt_cht_es8316_mc_driver);
 610MODULE_DESCRIPTION("ASoC Intel(R) Baytrail/Cherrytrail Machine driver");
 611MODULE_AUTHOR("David Yang <yangxiaohua@everest-semi.com>");
 612MODULE_LICENSE("GPL v2");
 613MODULE_ALIAS("platform:bytcht_es8316");
 614