linux/arch/arm/mach-pxa/colibri-pxa270.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-only
   2/*
   3 *  linux/arch/arm/mach-pxa/colibri-pxa270.c
   4 *
   5 *  Support for Toradex PXA270 based Colibri module
   6 *  Daniel Mack <daniel@caiaq.de>
   7 *  Marek Vasut <marek.vasut@gmail.com>
   8 */
   9
  10#include <linux/init.h>
  11#include <linux/interrupt.h>
  12#include <linux/moduleparam.h>
  13#include <linux/kernel.h>
  14#include <linux/mtd/mtd.h>
  15#include <linux/mtd/partitions.h>
  16#include <linux/mtd/physmap.h>
  17#include <linux/platform_device.h>
  18#include <linux/regulator/machine.h>
  19#include <linux/ucb1400.h>
  20
  21#include <asm/mach/arch.h>
  22#include <asm/mach/flash.h>
  23#include <asm/mach-types.h>
  24#include <linux/sizes.h>
  25
  26#include <mach/audio.h>
  27#include "colibri.h"
  28#include "pxa27x.h"
  29
  30#include "devices.h"
  31#include "generic.h"
  32
  33/******************************************************************************
  34 * Evaluation board MFP
  35 ******************************************************************************/
  36#ifdef   CONFIG_MACH_COLIBRI_EVALBOARD
  37static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {
  38        /* MMC */
  39        GPIO32_MMC_CLK,
  40        GPIO92_MMC_DAT_0,
  41        GPIO109_MMC_DAT_1,
  42        GPIO110_MMC_DAT_2,
  43        GPIO111_MMC_DAT_3,
  44        GPIO112_MMC_CMD,
  45        GPIO0_GPIO,     /* SD detect */
  46
  47        /* FFUART */
  48        GPIO39_FFUART_TXD,
  49        GPIO34_FFUART_RXD,
  50
  51        /* UHC */
  52        GPIO88_USBH1_PWR,
  53        GPIO89_USBH1_PEN,
  54        GPIO119_USBH2_PWR,
  55        GPIO120_USBH2_PEN,
  56
  57        /* PCMCIA */
  58        GPIO85_nPCE_1,
  59        GPIO54_nPCE_2,
  60        GPIO55_nPREG,
  61        GPIO50_nPIOR,
  62        GPIO51_nPIOW,
  63        GPIO49_nPWE,
  64        GPIO48_nPOE,
  65        GPIO57_nIOIS16,
  66        GPIO56_nPWAIT,
  67        GPIO104_PSKTSEL,
  68        GPIO53_GPIO,    /* RESET */
  69        GPIO83_GPIO,    /* BVD1 */
  70        GPIO82_GPIO,    /* BVD2 */
  71        GPIO1_GPIO,     /* READY */
  72        GPIO84_GPIO,    /* DETECT */
  73        GPIO107_GPIO,   /* PPEN */
  74
  75        /* I2C */
  76        GPIO117_I2C_SCL,
  77        GPIO118_I2C_SDA,
  78};
  79#else
  80static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {};
  81#endif
  82
  83#ifdef  CONFIG_MACH_COLIBRI_PXA270_INCOME
  84static mfp_cfg_t income_pin_config[] __initdata = {
  85        /* MMC */
  86        GPIO32_MMC_CLK,
  87        GPIO92_MMC_DAT_0,
  88        GPIO109_MMC_DAT_1,
  89        GPIO110_MMC_DAT_2,
  90        GPIO111_MMC_DAT_3,
  91        GPIO112_MMC_CMD,
  92        GPIO0_GPIO,     /* SD detect */
  93        GPIO1_GPIO,     /* SD read-only */
  94
  95        /* FFUART */
  96        GPIO39_FFUART_TXD,
  97        GPIO34_FFUART_RXD,
  98
  99        /* BFUART */
 100        GPIO42_BTUART_RXD,
 101        GPIO43_BTUART_TXD,
 102        GPIO45_BTUART_RTS,
 103
 104        /* STUART */
 105        GPIO46_STUART_RXD,
 106        GPIO47_STUART_TXD,
 107
 108        /* UHC */
 109        GPIO88_USBH1_PWR,
 110        GPIO89_USBH1_PEN,
 111
 112        /* LCD */
 113        GPIOxx_LCD_TFT_16BPP,
 114
 115        /* PWM */
 116        GPIO16_PWM0_OUT,
 117
 118        /* I2C */
 119        GPIO117_I2C_SCL,
 120        GPIO118_I2C_SDA,
 121
 122        /* LED */
 123        GPIO54_GPIO,    /* LED A */
 124        GPIO55_GPIO,    /* LED B */
 125};
 126#else
 127static mfp_cfg_t income_pin_config[] __initdata = {};
 128#endif
 129
 130/******************************************************************************
 131 * Pin configuration
 132 ******************************************************************************/
 133static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
 134        /* Ethernet */
 135        GPIO78_nCS_2,   /* Ethernet CS */
 136        GPIO114_GPIO,   /* Ethernet IRQ */
 137
 138        /* AC97 */
 139        GPIO28_AC97_BITCLK,
 140        GPIO29_AC97_SDATA_IN_0,
 141        GPIO30_AC97_SDATA_OUT,
 142        GPIO31_AC97_SYNC,
 143        GPIO95_AC97_nRESET,
 144        GPIO98_AC97_SYSCLK,
 145        GPIO113_GPIO,   /* Touchscreen IRQ */
 146};
 147
 148/******************************************************************************
 149 * NOR Flash
 150 ******************************************************************************/
 151#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 152static struct mtd_partition colibri_partitions[] = {
 153        {
 154                .name =         "Bootloader",
 155                .offset =       0x00000000,
 156                .size =         0x00040000,
 157                .mask_flags =   MTD_WRITEABLE   /* force read-only */
 158        }, {
 159                .name =         "Kernel",
 160                .offset =       0x00040000,
 161                .size =         0x00400000,
 162                .mask_flags =   0
 163        }, {
 164                .name =         "Rootfs",
 165                .offset =       0x00440000,
 166                .size =         MTDPART_SIZ_FULL,
 167                .mask_flags =   0
 168        }
 169};
 170
 171static struct physmap_flash_data colibri_flash_data[] = {
 172        {
 173                .width          = 4,                    /* bankwidth in bytes */
 174                .parts          = colibri_partitions,
 175                .nr_parts       = ARRAY_SIZE(colibri_partitions)
 176        }
 177};
 178
 179static struct resource colibri_pxa270_flash_resource = {
 180        .start  = PXA_CS0_PHYS,
 181        .end    = PXA_CS0_PHYS + SZ_32M - 1,
 182        .flags  = IORESOURCE_MEM,
 183};
 184
 185static struct platform_device colibri_pxa270_flash_device = {
 186        .name   = "physmap-flash",
 187        .id     = 0,
 188        .dev    = {
 189                .platform_data = colibri_flash_data,
 190        },
 191        .resource = &colibri_pxa270_flash_resource,
 192        .num_resources = 1,
 193};
 194
 195static void __init colibri_pxa270_nor_init(void)
 196{
 197        platform_device_register(&colibri_pxa270_flash_device);
 198}
 199#else
 200static inline void colibri_pxa270_nor_init(void) {}
 201#endif
 202
 203/******************************************************************************
 204 * Ethernet
 205 ******************************************************************************/
 206#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
 207static struct resource colibri_pxa270_dm9000_resources[] = {
 208        {
 209                .start  = PXA_CS2_PHYS,
 210                .end    = PXA_CS2_PHYS + 3,
 211                .flags  = IORESOURCE_MEM,
 212        },
 213        {
 214                .start  = PXA_CS2_PHYS + 4,
 215                .end    = PXA_CS2_PHYS + 4 + 500,
 216                .flags  = IORESOURCE_MEM,
 217        },
 218        {
 219                .start  = PXA_GPIO_TO_IRQ(GPIO114_COLIBRI_PXA270_ETH_IRQ),
 220                .end    = PXA_GPIO_TO_IRQ(GPIO114_COLIBRI_PXA270_ETH_IRQ),
 221                .flags  = IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
 222        },
 223};
 224
 225static struct platform_device colibri_pxa270_dm9000_device = {
 226        .name           = "dm9000",
 227        .id             = -1,
 228        .num_resources  = ARRAY_SIZE(colibri_pxa270_dm9000_resources),
 229        .resource       = colibri_pxa270_dm9000_resources,
 230};
 231
 232static void __init colibri_pxa270_eth_init(void)
 233{
 234        platform_device_register(&colibri_pxa270_dm9000_device);
 235}
 236#else
 237static inline void colibri_pxa270_eth_init(void) {}
 238#endif
 239
 240/******************************************************************************
 241 * Audio and Touchscreen
 242 ******************************************************************************/
 243#if     defined(CONFIG_TOUCHSCREEN_UCB1400) || \
 244        defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
 245static pxa2xx_audio_ops_t colibri_pxa270_ac97_pdata = {
 246        .reset_gpio     = 95,
 247};
 248
 249static struct ucb1400_pdata colibri_pxa270_ucb1400_pdata = {
 250        .irq            = PXA_GPIO_TO_IRQ(GPIO113_COLIBRI_PXA270_TS_IRQ),
 251};
 252
 253static struct platform_device colibri_pxa270_ucb1400_device = {
 254        .name           = "ucb1400_core",
 255        .id             = -1,
 256        .dev            = {
 257                .platform_data = &colibri_pxa270_ucb1400_pdata,
 258        },
 259};
 260
 261static void __init colibri_pxa270_tsc_init(void)
 262{
 263        pxa_set_ac97_info(&colibri_pxa270_ac97_pdata);
 264        platform_device_register(&colibri_pxa270_ucb1400_device);
 265}
 266#else
 267static inline void colibri_pxa270_tsc_init(void) {}
 268#endif
 269
 270static int colibri_pxa270_baseboard;
 271core_param(colibri_pxa270_baseboard, colibri_pxa270_baseboard, int, 0444);
 272
 273static void __init colibri_pxa270_init(void)
 274{
 275        pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config));
 276
 277        colibri_pxa270_nor_init();
 278        colibri_pxa270_eth_init();
 279        colibri_pxa270_tsc_init();
 280
 281        switch (colibri_pxa270_baseboard) {
 282        case COLIBRI_EVALBOARD:
 283                pxa2xx_mfp_config(ARRAY_AND_SIZE(
 284                        colibri_pxa270_evalboard_pin_config));
 285                colibri_evalboard_init();
 286                break;
 287        case COLIBRI_PXA270_INCOME:
 288                pxa2xx_mfp_config(ARRAY_AND_SIZE(income_pin_config));
 289                colibri_pxa270_income_boardinit();
 290                break;
 291        default:
 292                printk(KERN_ERR "Illegal colibri_pxa270_baseboard type %d\n",
 293                                colibri_pxa270_baseboard);
 294        }
 295
 296        regulator_has_full_constraints();
 297}
 298
 299/* The "Income s.r.o. SH-Dmaster PXA270 SBC" board can be booted either
 300 * with the INCOME mach type or with COLIBRI and the kernel parameter
 301 * "colibri_pxa270_baseboard=1"
 302 */
 303static void __init colibri_pxa270_income_init(void)
 304{
 305        colibri_pxa270_baseboard = COLIBRI_PXA270_INCOME;
 306        colibri_pxa270_init();
 307}
 308
 309MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
 310        .atag_offset    = 0x100,
 311        .init_machine   = colibri_pxa270_init,
 312        .map_io         = pxa27x_map_io,
 313        .nr_irqs        = PXA_NR_IRQS,
 314        .init_irq       = pxa27x_init_irq,
 315        .handle_irq     = pxa27x_handle_irq,
 316        .init_time      = pxa_timer_init,
 317        .restart        = pxa_restart,
 318MACHINE_END
 319
 320MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
 321        .atag_offset    = 0x100,
 322        .init_machine   = colibri_pxa270_income_init,
 323        .map_io         = pxa27x_map_io,
 324        .nr_irqs        = PXA_NR_IRQS,
 325        .init_irq       = pxa27x_init_irq,
 326        .handle_irq     = pxa27x_handle_irq,
 327        .init_time      = pxa_timer_init,
 328        .restart        = pxa_restart,
 329MACHINE_END
 330
 331