linux/arch/arm/mach-pxa/lubbock.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-only
   2/*
   3 *  linux/arch/arm/mach-pxa/lubbock.c
   4 *
   5 *  Support for the Intel DBPXA250 Development Platform.
   6 *
   7 *  Author:     Nicolas Pitre
   8 *  Created:    Jun 15, 2001
   9 *  Copyright:  MontaVista Software Inc.
  10 */
  11#include <linux/clkdev.h>
  12#include <linux/gpio.h>
  13#include <linux/gpio/gpio-reg.h>
  14#include <linux/gpio/machine.h>
  15#include <linux/module.h>
  16#include <linux/kernel.h>
  17#include <linux/init.h>
  18#include <linux/io.h>
  19#include <linux/platform_device.h>
  20#include <linux/syscore_ops.h>
  21#include <linux/major.h>
  22#include <linux/fb.h>
  23#include <linux/interrupt.h>
  24#include <linux/mtd/mtd.h>
  25#include <linux/mtd/partitions.h>
  26#include <linux/smc91x.h>
  27#include <linux/slab.h>
  28#include <linux/leds.h>
  29
  30#include <linux/spi/spi.h>
  31#include <linux/spi/ads7846.h>
  32#include <linux/spi/pxa2xx_spi.h>
  33
  34#include <asm/setup.h>
  35#include <asm/memory.h>
  36#include <asm/mach-types.h>
  37#include <mach/hardware.h>
  38#include <asm/irq.h>
  39#include <linux/sizes.h>
  40
  41#include <asm/mach/arch.h>
  42#include <asm/mach/map.h>
  43#include <asm/mach/irq.h>
  44#include <asm/mach/flash.h>
  45
  46#include <asm/hardware/sa1111.h>
  47
  48#include "pxa25x.h"
  49#include <mach/audio.h>
  50#include <mach/lubbock.h>
  51#include "udc.h"
  52#include <linux/platform_data/irda-pxaficp.h>
  53#include <linux/platform_data/video-pxafb.h>
  54#include <linux/platform_data/mmc-pxamci.h>
  55#include "pm.h"
  56#include <mach/smemc.h>
  57
  58#include "generic.h"
  59#include "devices.h"
  60
  61static unsigned long lubbock_pin_config[] __initdata = {
  62        GPIO15_nCS_1,   /* CS1 - Flash */
  63        GPIO78_nCS_2,   /* CS2 - Baseboard FGPA */
  64        GPIO79_nCS_3,   /* CS3 - SMC ethernet */
  65        GPIO80_nCS_4,   /* CS4 - SA1111 */
  66
  67        /* SSP data pins */
  68        GPIO23_SSP1_SCLK,
  69        GPIO25_SSP1_TXD,
  70        GPIO26_SSP1_RXD,
  71
  72        /* AC97 */
  73        GPIO28_AC97_BITCLK,
  74        GPIO29_AC97_SDATA_IN_0,
  75        GPIO30_AC97_SDATA_OUT,
  76        GPIO31_AC97_SYNC,
  77
  78        /* LCD - 16bpp DSTN */
  79        GPIOxx_LCD_DSTN_16BPP,
  80
  81        /* BTUART */
  82        GPIO42_BTUART_RXD,
  83        GPIO43_BTUART_TXD,
  84        GPIO44_BTUART_CTS,
  85        GPIO45_BTUART_RTS,
  86
  87        /* PC Card */
  88        GPIO48_nPOE,
  89        GPIO49_nPWE,
  90        GPIO50_nPIOR,
  91        GPIO51_nPIOW,
  92        GPIO52_nPCE_1,
  93        GPIO53_nPCE_2,
  94        GPIO54_nPSKTSEL,
  95        GPIO55_nPREG,
  96        GPIO56_nPWAIT,
  97        GPIO57_nIOIS16,
  98
  99        /* MMC */
 100        GPIO6_MMC_CLK,
 101        GPIO8_MMC_CS0,
 102
 103        /* SA1111 chip */
 104        GPIO11_3_6MHz,
 105
 106        /* wakeup */
 107        GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
 108};
 109
 110#define LUB_HEXLED              __LUB_REG(LUBBOCK_FPGA_PHYS + 0x010)
 111
 112void lubbock_set_hexled(uint32_t value)
 113{
 114        LUB_HEXLED = value;
 115}
 116
 117static struct gpio_chip *lubbock_misc_wr_gc;
 118
 119static void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
 120{
 121        unsigned long m = mask, v = set;
 122        lubbock_misc_wr_gc->set_multiple(lubbock_misc_wr_gc, &m, &v);
 123}
 124
 125static int lubbock_udc_is_connected(void)
 126{
 127        return (LUB_MISC_RD & (1 << 9)) == 0;
 128}
 129
 130static struct pxa2xx_udc_mach_info udc_info __initdata = {
 131        .udc_is_connected       = lubbock_udc_is_connected,
 132        // no D+ pullup; lubbock can't connect/disconnect in software
 133};
 134
 135/* GPIOs for SA1111 PCMCIA */
 136static struct gpiod_lookup_table sa1111_pcmcia_gpio_table = {
 137        .dev_id = "1800",
 138        .table = {
 139                { "sa1111", 0, "a0vpp", GPIO_ACTIVE_HIGH },
 140                { "sa1111", 1, "a1vpp", GPIO_ACTIVE_HIGH },
 141                { "sa1111", 2, "a0vcc", GPIO_ACTIVE_HIGH },
 142                { "sa1111", 3, "a1vcc", GPIO_ACTIVE_HIGH },
 143                { "lubbock", 14, "b0vcc", GPIO_ACTIVE_HIGH },
 144                { "lubbock", 15, "b1vcc", GPIO_ACTIVE_HIGH },
 145                { },
 146        },
 147};
 148
 149static void lubbock_init_pcmcia(void)
 150{
 151        struct clk *clk;
 152
 153        gpiod_add_lookup_table(&sa1111_pcmcia_gpio_table);
 154
 155        /* Add an alias for the SA1111 PCMCIA clock */
 156        clk = clk_get_sys("pxa2xx-pcmcia", NULL);
 157        if (!IS_ERR(clk)) {
 158                clkdev_create(clk, NULL, "1800");
 159                clk_put(clk);
 160        }
 161}
 162
 163static struct resource sa1111_resources[] = {
 164        [0] = {
 165                .start  = 0x10000000,
 166                .end    = 0x10001fff,
 167                .flags  = IORESOURCE_MEM,
 168        },
 169        [1] = {
 170                .start  = LUBBOCK_SA1111_IRQ,
 171                .end    = LUBBOCK_SA1111_IRQ,
 172                .flags  = IORESOURCE_IRQ,
 173        },
 174};
 175
 176static struct sa1111_platform_data sa1111_info = {
 177        .irq_base       = LUBBOCK_SA1111_IRQ_BASE,
 178        .disable_devs   = SA1111_DEVID_SAC,
 179};
 180
 181static struct platform_device sa1111_device = {
 182        .name           = "sa1111",
 183        .id             = -1,
 184        .num_resources  = ARRAY_SIZE(sa1111_resources),
 185        .resource       = sa1111_resources,
 186        .dev            = {
 187                .platform_data  = &sa1111_info,
 188        },
 189};
 190
 191/* ADS7846 is connected through SSP ... and if your board has J5 populated,
 192 * you can select it to replace the ucb1400 by switching the touchscreen cable
 193 * (to J5) and poking board registers (as done below).  Else it's only useful
 194 * for the temperature sensors.
 195 */
 196static struct pxa2xx_spi_controller pxa_ssp_master_info = {
 197        .num_chipselect = 1,
 198};
 199
 200static int lubbock_ads7846_pendown_state(void)
 201{
 202        /* TS_BUSY is bit 8 in LUB_MISC_RD, but pendown is irq-only */
 203        return 0;
 204}
 205
 206static struct ads7846_platform_data ads_info = {
 207        .model                  = 7846,
 208        .vref_delay_usecs       = 100,          /* internal, no cap */
 209        .get_pendown_state      = lubbock_ads7846_pendown_state,
 210        // .x_plate_ohms                = 500,  /* GUESS! */
 211        // .y_plate_ohms                = 500,  /* GUESS! */
 212};
 213
 214static void ads7846_cs(u32 command)
 215{
 216        static const unsigned   TS_nCS = 1 << 11;
 217        lubbock_set_misc_wr(TS_nCS, (command == PXA2XX_CS_ASSERT) ? 0 : TS_nCS);
 218}
 219
 220static struct pxa2xx_spi_chip ads_hw = {
 221        .tx_threshold           = 1,
 222        .rx_threshold           = 2,
 223        .cs_control             = ads7846_cs,
 224};
 225
 226static struct spi_board_info spi_board_info[] __initdata = { {
 227        .modalias       = "ads7846",
 228        .platform_data  = &ads_info,
 229        .controller_data = &ads_hw,
 230        .irq            = LUBBOCK_BB_IRQ,
 231        .max_speed_hz   = 120000 /* max sample rate at 3V */
 232                                * 26 /* command + data + overhead */,
 233        .bus_num        = 1,
 234        .chip_select    = 0,
 235},
 236};
 237
 238static struct resource smc91x_resources[] = {
 239        [0] = {
 240                .name   = "smc91x-regs",
 241                .start  = 0x0c000c00,
 242                .end    = 0x0c0fffff,
 243                .flags  = IORESOURCE_MEM,
 244        },
 245        [1] = {
 246                .start  = LUBBOCK_ETH_IRQ,
 247                .end    = LUBBOCK_ETH_IRQ,
 248                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 249        },
 250        [2] = {
 251                .name   = "smc91x-attrib",
 252                .start  = 0x0e000000,
 253                .end    = 0x0e0fffff,
 254                .flags  = IORESOURCE_MEM,
 255        },
 256};
 257
 258static struct smc91x_platdata lubbock_smc91x_info = {
 259        .flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_2,
 260};
 261
 262static struct platform_device smc91x_device = {
 263        .name           = "smc91x",
 264        .id             = -1,
 265        .num_resources  = ARRAY_SIZE(smc91x_resources),
 266        .resource       = smc91x_resources,
 267        .dev            = {
 268                .platform_data = &lubbock_smc91x_info,
 269        },
 270};
 271
 272static struct resource flash_resources[] = {
 273        [0] = {
 274                .start  = 0x00000000,
 275                .end    = SZ_64M - 1,
 276                .flags  = IORESOURCE_MEM,
 277        },
 278        [1] = {
 279                .start  = 0x04000000,
 280                .end    = 0x04000000 + SZ_64M - 1,
 281                .flags  = IORESOURCE_MEM,
 282        },
 283};
 284
 285static struct mtd_partition lubbock_partitions[] = {
 286        {
 287                .name =         "Bootloader",
 288                .size =         0x00040000,
 289                .offset =       0,
 290                .mask_flags =   MTD_WRITEABLE  /* force read-only */
 291        },{
 292                .name =         "Kernel",
 293                .size =         0x00100000,
 294                .offset =       0x00040000,
 295        },{
 296                .name =         "Filesystem",
 297                .size =         MTDPART_SIZ_FULL,
 298                .offset =       0x00140000
 299        }
 300};
 301
 302static struct flash_platform_data lubbock_flash_data[2] = {
 303        {
 304                .map_name       = "cfi_probe",
 305                .parts          = lubbock_partitions,
 306                .nr_parts       = ARRAY_SIZE(lubbock_partitions),
 307        }, {
 308                .map_name       = "cfi_probe",
 309                .parts          = NULL,
 310                .nr_parts       = 0,
 311        }
 312};
 313
 314static struct platform_device lubbock_flash_device[2] = {
 315        {
 316                .name           = "pxa2xx-flash",
 317                .id             = 0,
 318                .dev = {
 319                        .platform_data = &lubbock_flash_data[0],
 320                },
 321                .resource = &flash_resources[0],
 322                .num_resources = 1,
 323        },
 324        {
 325                .name           = "pxa2xx-flash",
 326                .id             = 1,
 327                .dev = {
 328                        .platform_data = &lubbock_flash_data[1],
 329                },
 330                .resource = &flash_resources[1],
 331                .num_resources = 1,
 332        },
 333};
 334
 335static struct resource lubbock_cplds_resources[] = {
 336        [0] = {
 337                .start  = LUBBOCK_FPGA_PHYS + 0xc0,
 338                .end    = LUBBOCK_FPGA_PHYS + 0xe0 - 1,
 339                .flags  = IORESOURCE_MEM,
 340        },
 341        [1] = {
 342                .start  = PXA_GPIO_TO_IRQ(0),
 343                .end    = PXA_GPIO_TO_IRQ(0),
 344                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
 345        },
 346        [2] = {
 347                .start  = LUBBOCK_IRQ(0),
 348                .end    = LUBBOCK_IRQ(6),
 349                .flags  = IORESOURCE_IRQ,
 350        },
 351};
 352
 353static struct platform_device lubbock_cplds_device = {
 354        .name           = "pxa_cplds_irqs",
 355        .id             = -1,
 356        .resource       = &lubbock_cplds_resources[0],
 357        .num_resources  = 3,
 358};
 359
 360
 361static struct platform_device *devices[] __initdata = {
 362        &sa1111_device,
 363        &smc91x_device,
 364        &lubbock_flash_device[0],
 365        &lubbock_flash_device[1],
 366        &lubbock_cplds_device,
 367};
 368
 369static struct pxafb_mode_info sharp_lm8v31_mode = {
 370        .pixclock       = 270000,
 371        .xres           = 640,
 372        .yres           = 480,
 373        .bpp            = 16,
 374        .hsync_len      = 1,
 375        .left_margin    = 3,
 376        .right_margin   = 3,
 377        .vsync_len      = 1,
 378        .upper_margin   = 0,
 379        .lower_margin   = 0,
 380        .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 381        .cmap_greyscale = 0,
 382};
 383
 384static struct pxafb_mach_info sharp_lm8v31 = {
 385        .modes          = &sharp_lm8v31_mode,
 386        .num_modes      = 1,
 387        .cmap_inverse   = 0,
 388        .cmap_static    = 0,
 389        .lcd_conn       = LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
 390                          LCD_AC_BIAS_FREQ(255),
 391};
 392
 393#define MMC_POLL_RATE           msecs_to_jiffies(1000)
 394
 395static irq_handler_t mmc_detect_int;
 396static void *mmc_detect_int_data;
 397static struct timer_list mmc_timer;
 398
 399static void lubbock_mmc_poll(struct timer_list *unused)
 400{
 401        unsigned long flags;
 402
 403        /* clear any previous irq state, then ... */
 404        local_irq_save(flags);
 405        LUB_IRQ_SET_CLR &= ~(1 << 0);
 406        local_irq_restore(flags);
 407
 408        /* poll until mmc/sd card is removed */
 409        if (LUB_IRQ_SET_CLR & (1 << 0))
 410                mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
 411        else {
 412                (void) mmc_detect_int(LUBBOCK_SD_IRQ, mmc_detect_int_data);
 413                enable_irq(LUBBOCK_SD_IRQ);
 414        }
 415}
 416
 417static irqreturn_t lubbock_detect_int(int irq, void *data)
 418{
 419        /* IRQ is level triggered; disable, and poll for removal */
 420        disable_irq(irq);
 421        mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
 422
 423        return mmc_detect_int(irq, data);
 424}
 425
 426static int lubbock_mci_init(struct device *dev,
 427                irq_handler_t detect_int,
 428                void *data)
 429{
 430        /* detect card insert/eject */
 431        mmc_detect_int = detect_int;
 432        mmc_detect_int_data = data;
 433        timer_setup(&mmc_timer, lubbock_mmc_poll, 0);
 434        return request_irq(LUBBOCK_SD_IRQ, lubbock_detect_int,
 435                           0, "lubbock-sd-detect", data);
 436}
 437
 438static int lubbock_mci_get_ro(struct device *dev)
 439{
 440        return (LUB_MISC_RD & (1 << 2)) != 0;
 441}
 442
 443static void lubbock_mci_exit(struct device *dev, void *data)
 444{
 445        free_irq(LUBBOCK_SD_IRQ, data);
 446        del_timer_sync(&mmc_timer);
 447}
 448
 449static struct pxamci_platform_data lubbock_mci_platform_data = {
 450        .ocr_mask               = MMC_VDD_32_33|MMC_VDD_33_34,
 451        .detect_delay_ms        = 10,
 452        .init                   = lubbock_mci_init,
 453        .get_ro                 = lubbock_mci_get_ro,
 454        .exit                   = lubbock_mci_exit,
 455};
 456
 457static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
 458{
 459        unsigned long flags;
 460
 461        local_irq_save(flags);
 462        if (mode & IR_SIRMODE) {
 463                lubbock_set_misc_wr(BIT(4), 0);
 464        } else if (mode & IR_FIRMODE) {
 465                lubbock_set_misc_wr(BIT(4), BIT(4));
 466        }
 467        pxa2xx_transceiver_mode(dev, mode);
 468        local_irq_restore(flags);
 469}
 470
 471static struct pxaficp_platform_data lubbock_ficp_platform_data = {
 472        .gpio_pwdown            = -1,
 473        .transceiver_cap        = IR_SIRMODE | IR_FIRMODE,
 474        .transceiver_mode       = lubbock_irda_transceiver_mode,
 475};
 476
 477static void __init lubbock_init(void)
 478{
 479        int flashboot = (LUB_CONF_SWITCHES & 1);
 480
 481        pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config));
 482
 483        lubbock_misc_wr_gc = gpio_reg_init(NULL, (void *)&LUB_MISC_WR,
 484                                           -1, 16, "lubbock", 0, LUB_MISC_WR,
 485                                           NULL, NULL, NULL);
 486        if (IS_ERR(lubbock_misc_wr_gc)) {
 487                pr_err("Lubbock: unable to register lubbock GPIOs: %ld\n",
 488                       PTR_ERR(lubbock_misc_wr_gc));
 489                lubbock_misc_wr_gc = NULL;
 490        }
 491
 492        pxa_set_ffuart_info(NULL);
 493        pxa_set_btuart_info(NULL);
 494        pxa_set_stuart_info(NULL);
 495
 496        lubbock_init_pcmcia();
 497
 498        clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
 499        pxa_set_udc_info(&udc_info);
 500        pxa_set_fb_info(NULL, &sharp_lm8v31);
 501        pxa_set_mci_info(&lubbock_mci_platform_data);
 502        pxa_set_ficp_info(&lubbock_ficp_platform_data);
 503        pxa_set_ac97_info(NULL);
 504
 505        lubbock_flash_data[0].width = lubbock_flash_data[1].width =
 506                (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
 507        /* Compensate for the nROMBT switch which swaps the flash banks */
 508        printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
 509               flashboot?"Flash":"ROM", flashboot);
 510
 511        lubbock_flash_data[flashboot^1].name = "application-flash";
 512        lubbock_flash_data[flashboot].name = "boot-rom";
 513        (void) platform_add_devices(devices, ARRAY_SIZE(devices));
 514
 515        pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
 516        spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
 517}
 518
 519static struct map_desc lubbock_io_desc[] __initdata = {
 520        {       /* CPLD */
 521                .virtual        =  LUBBOCK_FPGA_VIRT,
 522                .pfn            = __phys_to_pfn(LUBBOCK_FPGA_PHYS),
 523                .length         = 0x00100000,
 524                .type           = MT_DEVICE
 525        }
 526};
 527
 528static void __init lubbock_map_io(void)
 529{
 530        pxa25x_map_io();
 531        iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc));
 532
 533        PCFR |= PCFR_OPDE;
 534}
 535
 536/*
 537 * Driver for the 8 discrete LEDs available for general use:
 538 * Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
 539 * so be sure to not monkey with them here.
 540 */
 541
 542#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
 543struct lubbock_led {
 544        struct led_classdev     cdev;
 545        u8                      mask;
 546};
 547
 548/*
 549 * The triggers lines up below will only be used if the
 550 * LED triggers are compiled in.
 551 */
 552static const struct {
 553        const char *name;
 554        const char *trigger;
 555} lubbock_leds[] = {
 556        { "lubbock:D28", "default-on", },
 557        { "lubbock:D27", "cpu0", },
 558        { "lubbock:D26", "heartbeat" },
 559        { "lubbock:D25", },
 560        { "lubbock:D24", },
 561        { "lubbock:D23", },
 562        { "lubbock:D22", },
 563        { "lubbock:D21", },
 564};
 565
 566static void lubbock_led_set(struct led_classdev *cdev,
 567                              enum led_brightness b)
 568{
 569        struct lubbock_led *led = container_of(cdev,
 570                                         struct lubbock_led, cdev);
 571        u32 reg = LUB_DISC_BLNK_LED;
 572
 573        if (b != LED_OFF)
 574                reg |= led->mask;
 575        else
 576                reg &= ~led->mask;
 577
 578        LUB_DISC_BLNK_LED = reg;
 579}
 580
 581static enum led_brightness lubbock_led_get(struct led_classdev *cdev)
 582{
 583        struct lubbock_led *led = container_of(cdev,
 584                                         struct lubbock_led, cdev);
 585        u32 reg = LUB_DISC_BLNK_LED;
 586
 587        return (reg & led->mask) ? LED_FULL : LED_OFF;
 588}
 589
 590static int __init lubbock_leds_init(void)
 591{
 592        int i;
 593
 594        if (!machine_is_lubbock())
 595                return -ENODEV;
 596
 597        /* All ON */
 598        LUB_DISC_BLNK_LED |= 0xff;
 599        for (i = 0; i < ARRAY_SIZE(lubbock_leds); i++) {
 600                struct lubbock_led *led;
 601
 602                led = kzalloc(sizeof(*led), GFP_KERNEL);
 603                if (!led)
 604                        break;
 605
 606                led->cdev.name = lubbock_leds[i].name;
 607                led->cdev.brightness_set = lubbock_led_set;
 608                led->cdev.brightness_get = lubbock_led_get;
 609                led->cdev.default_trigger = lubbock_leds[i].trigger;
 610                led->mask = BIT(i);
 611
 612                if (led_classdev_register(NULL, &led->cdev) < 0) {
 613                        kfree(led);
 614                        break;
 615                }
 616        }
 617
 618        return 0;
 619}
 620
 621/*
 622 * Since we may have triggers on any subsystem, defer registration
 623 * until after subsystem_init.
 624 */
 625fs_initcall(lubbock_leds_init);
 626#endif
 627
 628MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
 629        /* Maintainer: MontaVista Software Inc. */
 630        .map_io         = lubbock_map_io,
 631        .nr_irqs        = LUBBOCK_NR_IRQS,
 632        .init_irq       = pxa25x_init_irq,
 633        .handle_irq     = pxa25x_handle_irq,
 634        .init_time      = pxa_timer_init,
 635        .init_machine   = lubbock_init,
 636        .restart        = pxa_restart,
 637MACHINE_END
 638