1
2menu "Distributed Switch Architecture drivers"
3 depends on HAVE_NET_DSA
4
5source "drivers/net/dsa/b53/Kconfig"
6
7config NET_DSA_BCM_SF2
8 tristate "Broadcom Starfighter 2 Ethernet switch support"
9 depends on HAS_IOMEM && NET_DSA
10 select NET_DSA_TAG_BRCM
11 select FIXED_PHY
12 select BCM7XXX_PHY
13 select MDIO_BCM_UNIMAC
14 select B53
15 ---help---
16 This enables support for the Broadcom Starfighter 2 Ethernet
17 switch chips.
18
19config NET_DSA_LOOP
20 tristate "DSA mock-up Ethernet switch chip support"
21 depends on NET_DSA
22 select FIXED_PHY
23 ---help---
24 This enables support for a fake mock-up switch chip which
25 exercises the DSA APIs.
26
27config NET_DSA_LANTIQ_GSWIP
28 tristate "Lantiq / Intel GSWIP"
29 depends on HAS_IOMEM && NET_DSA
30 select NET_DSA_TAG_GSWIP
31 ---help---
32 This enables support for the Lantiq / Intel GSWIP 2.1 found in
33 the xrx200 / VR9 SoC.
34
35config NET_DSA_MT7530
36 tristate "Mediatek MT7530 Ethernet switch support"
37 depends on NET_DSA
38 select NET_DSA_TAG_MTK
39 ---help---
40 This enables support for the Mediatek MT7530 Ethernet switch
41 chip.
42
43config NET_DSA_MV88E6060
44 tristate "Marvell 88E6060 ethernet switch chip support"
45 depends on NET_DSA
46 select NET_DSA_TAG_TRAILER
47 ---help---
48 This enables support for the Marvell 88E6060 ethernet switch
49 chip.
50
51source "drivers/net/dsa/microchip/Kconfig"
52
53source "drivers/net/dsa/mv88e6xxx/Kconfig"
54
55source "drivers/net/dsa/ocelot/Kconfig"
56
57source "drivers/net/dsa/sja1105/Kconfig"
58
59config NET_DSA_QCA8K
60 tristate "Qualcomm Atheros QCA8K Ethernet switch family support"
61 depends on NET_DSA
62 select NET_DSA_TAG_QCA
63 select REGMAP
64 ---help---
65 This enables support for the Qualcomm Atheros QCA8K Ethernet
66 switch chips.
67
68config NET_DSA_REALTEK_SMI
69 tristate "Realtek SMI Ethernet switch family support"
70 depends on NET_DSA
71 select FIXED_PHY
72 select IRQ_DOMAIN
73 select REALTEK_PHY
74 select REGMAP
75 ---help---
76 This enables support for the Realtek SMI-based switch
77 chips, currently only RTL8366RB.
78
79config NET_DSA_SMSC_LAN9303
80 tristate
81 select NET_DSA_TAG_LAN9303
82 select REGMAP
83 ---help---
84 This enables support for the SMSC/Microchip LAN9303 3 port ethernet
85 switch chips.
86
87config NET_DSA_SMSC_LAN9303_I2C
88 tristate "SMSC/Microchip LAN9303 3-ports 10/100 ethernet switch in I2C managed mode"
89 depends on NET_DSA && I2C
90 select NET_DSA_SMSC_LAN9303
91 select REGMAP_I2C
92 ---help---
93 Enable access functions if the SMSC/Microchip LAN9303 is configured
94 for I2C managed mode.
95
96config NET_DSA_SMSC_LAN9303_MDIO
97 tristate "SMSC/Microchip LAN9303 3-ports 10/100 ethernet switch in MDIO managed mode"
98 depends on NET_DSA
99 select NET_DSA_SMSC_LAN9303
100 ---help---
101 Enable access functions if the SMSC/Microchip LAN9303 is configured
102 for MDIO managed mode.
103
104config NET_DSA_VITESSE_VSC73XX
105 tristate
106 depends on OF
107 depends on NET_DSA
108 select FIXED_PHY
109 select VITESSE_PHY
110 select GPIOLIB
111 ---help---
112 This enables support for the Vitesse VSC7385, VSC7388,
113 VSC7395 and VSC7398 SparX integrated ethernet switches.
114
115config NET_DSA_VITESSE_VSC73XX_SPI
116 tristate "Vitesse VSC7385/7388/7395/7398 SPI mode support"
117 depends on OF
118 depends on NET_DSA
119 depends on SPI
120 select NET_DSA_VITESSE_VSC73XX
121 ---help---
122 This enables support for the Vitesse VSC7385, VSC7388, VSC7395
123 and VSC7398 SparX integrated ethernet switches in SPI managed mode.
124
125config NET_DSA_VITESSE_VSC73XX_PLATFORM
126 tristate "Vitesse VSC7385/7388/7395/7398 Platform mode support"
127 depends on OF
128 depends on NET_DSA
129 depends on HAS_IOMEM
130 select NET_DSA_VITESSE_VSC73XX
131 ---help---
132 This enables support for the Vitesse VSC7385, VSC7388, VSC7395
133 and VSC7398 SparX integrated ethernet switches, connected over
134 a CPU-attached address bus and work in memory-mapped I/O mode.
135endmenu
136