linux/drivers/net/dsa/microchip/ksz9477.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0
   2/*
   3 * Microchip KSZ9477 switch driver main logic
   4 *
   5 * Copyright (C) 2017-2019 Microchip Technology Inc.
   6 */
   7
   8#include <linux/kernel.h>
   9#include <linux/module.h>
  10#include <linux/iopoll.h>
  11#include <linux/platform_data/microchip-ksz.h>
  12#include <linux/phy.h>
  13#include <linux/if_bridge.h>
  14#include <net/dsa.h>
  15#include <net/switchdev.h>
  16
  17#include "ksz9477_reg.h"
  18#include "ksz_common.h"
  19
  20/* Used with variable features to indicate capabilities. */
  21#define GBIT_SUPPORT                    BIT(0)
  22#define NEW_XMII                        BIT(1)
  23#define IS_9893                         BIT(2)
  24
  25static const struct {
  26        int index;
  27        char string[ETH_GSTRING_LEN];
  28} ksz9477_mib_names[TOTAL_SWITCH_COUNTER_NUM] = {
  29        { 0x00, "rx_hi" },
  30        { 0x01, "rx_undersize" },
  31        { 0x02, "rx_fragments" },
  32        { 0x03, "rx_oversize" },
  33        { 0x04, "rx_jabbers" },
  34        { 0x05, "rx_symbol_err" },
  35        { 0x06, "rx_crc_err" },
  36        { 0x07, "rx_align_err" },
  37        { 0x08, "rx_mac_ctrl" },
  38        { 0x09, "rx_pause" },
  39        { 0x0A, "rx_bcast" },
  40        { 0x0B, "rx_mcast" },
  41        { 0x0C, "rx_ucast" },
  42        { 0x0D, "rx_64_or_less" },
  43        { 0x0E, "rx_65_127" },
  44        { 0x0F, "rx_128_255" },
  45        { 0x10, "rx_256_511" },
  46        { 0x11, "rx_512_1023" },
  47        { 0x12, "rx_1024_1522" },
  48        { 0x13, "rx_1523_2000" },
  49        { 0x14, "rx_2001" },
  50        { 0x15, "tx_hi" },
  51        { 0x16, "tx_late_col" },
  52        { 0x17, "tx_pause" },
  53        { 0x18, "tx_bcast" },
  54        { 0x19, "tx_mcast" },
  55        { 0x1A, "tx_ucast" },
  56        { 0x1B, "tx_deferred" },
  57        { 0x1C, "tx_total_col" },
  58        { 0x1D, "tx_exc_col" },
  59        { 0x1E, "tx_single_col" },
  60        { 0x1F, "tx_mult_col" },
  61        { 0x80, "rx_total" },
  62        { 0x81, "tx_total" },
  63        { 0x82, "rx_discards" },
  64        { 0x83, "tx_discards" },
  65};
  66
  67static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
  68{
  69        regmap_update_bits(dev->regmap[0], addr, bits, set ? bits : 0);
  70}
  71
  72static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits,
  73                         bool set)
  74{
  75        regmap_update_bits(dev->regmap[0], PORT_CTRL_ADDR(port, offset),
  76                           bits, set ? bits : 0);
  77}
  78
  79static void ksz9477_cfg32(struct ksz_device *dev, u32 addr, u32 bits, bool set)
  80{
  81        regmap_update_bits(dev->regmap[2], addr, bits, set ? bits : 0);
  82}
  83
  84static void ksz9477_port_cfg32(struct ksz_device *dev, int port, int offset,
  85                               u32 bits, bool set)
  86{
  87        regmap_update_bits(dev->regmap[2], PORT_CTRL_ADDR(port, offset),
  88                           bits, set ? bits : 0);
  89}
  90
  91static int ksz9477_wait_vlan_ctrl_ready(struct ksz_device *dev)
  92{
  93        unsigned int val;
  94
  95        return regmap_read_poll_timeout(dev->regmap[0], REG_SW_VLAN_CTRL,
  96                                        val, !(val & VLAN_START), 10, 1000);
  97}
  98
  99static int ksz9477_get_vlan_table(struct ksz_device *dev, u16 vid,
 100                                  u32 *vlan_table)
 101{
 102        int ret;
 103
 104        mutex_lock(&dev->vlan_mutex);
 105
 106        ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M);
 107        ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_READ | VLAN_START);
 108
 109        /* wait to be cleared */
 110        ret = ksz9477_wait_vlan_ctrl_ready(dev);
 111        if (ret) {
 112                dev_dbg(dev->dev, "Failed to read vlan table\n");
 113                goto exit;
 114        }
 115
 116        ksz_read32(dev, REG_SW_VLAN_ENTRY__4, &vlan_table[0]);
 117        ksz_read32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, &vlan_table[1]);
 118        ksz_read32(dev, REG_SW_VLAN_ENTRY_PORTS__4, &vlan_table[2]);
 119
 120        ksz_write8(dev, REG_SW_VLAN_CTRL, 0);
 121
 122exit:
 123        mutex_unlock(&dev->vlan_mutex);
 124
 125        return ret;
 126}
 127
 128static int ksz9477_set_vlan_table(struct ksz_device *dev, u16 vid,
 129                                  u32 *vlan_table)
 130{
 131        int ret;
 132
 133        mutex_lock(&dev->vlan_mutex);
 134
 135        ksz_write32(dev, REG_SW_VLAN_ENTRY__4, vlan_table[0]);
 136        ksz_write32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, vlan_table[1]);
 137        ksz_write32(dev, REG_SW_VLAN_ENTRY_PORTS__4, vlan_table[2]);
 138
 139        ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M);
 140        ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_START | VLAN_WRITE);
 141
 142        /* wait to be cleared */
 143        ret = ksz9477_wait_vlan_ctrl_ready(dev);
 144        if (ret) {
 145                dev_dbg(dev->dev, "Failed to write vlan table\n");
 146                goto exit;
 147        }
 148
 149        ksz_write8(dev, REG_SW_VLAN_CTRL, 0);
 150
 151        /* update vlan cache table */
 152        dev->vlan_cache[vid].table[0] = vlan_table[0];
 153        dev->vlan_cache[vid].table[1] = vlan_table[1];
 154        dev->vlan_cache[vid].table[2] = vlan_table[2];
 155
 156exit:
 157        mutex_unlock(&dev->vlan_mutex);
 158
 159        return ret;
 160}
 161
 162static void ksz9477_read_table(struct ksz_device *dev, u32 *table)
 163{
 164        ksz_read32(dev, REG_SW_ALU_VAL_A, &table[0]);
 165        ksz_read32(dev, REG_SW_ALU_VAL_B, &table[1]);
 166        ksz_read32(dev, REG_SW_ALU_VAL_C, &table[2]);
 167        ksz_read32(dev, REG_SW_ALU_VAL_D, &table[3]);
 168}
 169
 170static void ksz9477_write_table(struct ksz_device *dev, u32 *table)
 171{
 172        ksz_write32(dev, REG_SW_ALU_VAL_A, table[0]);
 173        ksz_write32(dev, REG_SW_ALU_VAL_B, table[1]);
 174        ksz_write32(dev, REG_SW_ALU_VAL_C, table[2]);
 175        ksz_write32(dev, REG_SW_ALU_VAL_D, table[3]);
 176}
 177
 178static int ksz9477_wait_alu_ready(struct ksz_device *dev)
 179{
 180        unsigned int val;
 181
 182        return regmap_read_poll_timeout(dev->regmap[2], REG_SW_ALU_CTRL__4,
 183                                        val, !(val & ALU_START), 10, 1000);
 184}
 185
 186static int ksz9477_wait_alu_sta_ready(struct ksz_device *dev)
 187{
 188        unsigned int val;
 189
 190        return regmap_read_poll_timeout(dev->regmap[2],
 191                                        REG_SW_ALU_STAT_CTRL__4,
 192                                        val, !(val & ALU_STAT_START),
 193                                        10, 1000);
 194}
 195
 196static int ksz9477_reset_switch(struct ksz_device *dev)
 197{
 198        u8 data8;
 199        u32 data32;
 200
 201        /* reset switch */
 202        ksz_cfg(dev, REG_SW_OPERATION, SW_RESET, true);
 203
 204        /* turn off SPI DO Edge select */
 205        regmap_update_bits(dev->regmap[0], REG_SW_GLOBAL_SERIAL_CTRL_0,
 206                           SPI_AUTO_EDGE_DETECTION, 0);
 207
 208        /* default configuration */
 209        ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8);
 210        data8 = SW_AGING_ENABLE | SW_LINK_AUTO_AGING |
 211              SW_SRC_ADDR_FILTER | SW_FLUSH_STP_TABLE | SW_FLUSH_MSTP_TABLE;
 212        ksz_write8(dev, REG_SW_LUE_CTRL_1, data8);
 213
 214        /* disable interrupts */
 215        ksz_write32(dev, REG_SW_INT_MASK__4, SWITCH_INT_MASK);
 216        ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0x7F);
 217        ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32);
 218
 219        /* set broadcast storm protection 10% rate */
 220        regmap_update_bits(dev->regmap[1], REG_SW_MAC_CTRL_2,
 221                           BROADCAST_STORM_RATE,
 222                           (BROADCAST_STORM_VALUE *
 223                           BROADCAST_STORM_PROT_RATE) / 100);
 224
 225        if (dev->synclko_125)
 226                ksz_write8(dev, REG_SW_GLOBAL_OUTPUT_CTRL__1,
 227                           SW_ENABLE_REFCLKO | SW_REFCLKO_IS_125MHZ);
 228
 229        return 0;
 230}
 231
 232static void ksz9477_r_mib_cnt(struct ksz_device *dev, int port, u16 addr,
 233                              u64 *cnt)
 234{
 235        struct ksz_port *p = &dev->ports[port];
 236        unsigned int val;
 237        u32 data;
 238        int ret;
 239
 240        /* retain the flush/freeze bit */
 241        data = p->freeze ? MIB_COUNTER_FLUSH_FREEZE : 0;
 242        data |= MIB_COUNTER_READ;
 243        data |= (addr << MIB_COUNTER_INDEX_S);
 244        ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, data);
 245
 246        ret = regmap_read_poll_timeout(dev->regmap[2],
 247                        PORT_CTRL_ADDR(port, REG_PORT_MIB_CTRL_STAT__4),
 248                        val, !(val & MIB_COUNTER_READ), 10, 1000);
 249        /* failed to read MIB. get out of loop */
 250        if (ret) {
 251                dev_dbg(dev->dev, "Failed to get MIB\n");
 252                return;
 253        }
 254
 255        /* count resets upon read */
 256        ksz_pread32(dev, port, REG_PORT_MIB_DATA, &data);
 257        *cnt += data;
 258}
 259
 260static void ksz9477_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
 261                              u64 *dropped, u64 *cnt)
 262{
 263        addr = ksz9477_mib_names[addr].index;
 264        ksz9477_r_mib_cnt(dev, port, addr, cnt);
 265}
 266
 267static void ksz9477_freeze_mib(struct ksz_device *dev, int port, bool freeze)
 268{
 269        u32 val = freeze ? MIB_COUNTER_FLUSH_FREEZE : 0;
 270        struct ksz_port *p = &dev->ports[port];
 271
 272        /* enable/disable the port for flush/freeze function */
 273        mutex_lock(&p->mib.cnt_mutex);
 274        ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, val);
 275
 276        /* used by MIB counter reading code to know freeze is enabled */
 277        p->freeze = freeze;
 278        mutex_unlock(&p->mib.cnt_mutex);
 279}
 280
 281static void ksz9477_port_init_cnt(struct ksz_device *dev, int port)
 282{
 283        struct ksz_port_mib *mib = &dev->ports[port].mib;
 284
 285        /* flush all enabled port MIB counters */
 286        mutex_lock(&mib->cnt_mutex);
 287        ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4,
 288                     MIB_COUNTER_FLUSH_FREEZE);
 289        ksz_write8(dev, REG_SW_MAC_CTRL_6, SW_MIB_COUNTER_FLUSH);
 290        ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, 0);
 291        mutex_unlock(&mib->cnt_mutex);
 292
 293        mib->cnt_ptr = 0;
 294        memset(mib->counters, 0, dev->mib_cnt * sizeof(u64));
 295}
 296
 297static enum dsa_tag_protocol ksz9477_get_tag_protocol(struct dsa_switch *ds,
 298                                                      int port)
 299{
 300        enum dsa_tag_protocol proto = DSA_TAG_PROTO_KSZ9477;
 301        struct ksz_device *dev = ds->priv;
 302
 303        if (dev->features & IS_9893)
 304                proto = DSA_TAG_PROTO_KSZ9893;
 305        return proto;
 306}
 307
 308static int ksz9477_phy_read16(struct dsa_switch *ds, int addr, int reg)
 309{
 310        struct ksz_device *dev = ds->priv;
 311        u16 val = 0xffff;
 312
 313        /* No real PHY after this. Simulate the PHY.
 314         * A fixed PHY can be setup in the device tree, but this function is
 315         * still called for that port during initialization.
 316         * For RGMII PHY there is no way to access it so the fixed PHY should
 317         * be used.  For SGMII PHY the supporting code will be added later.
 318         */
 319        if (addr >= dev->phy_port_cnt) {
 320                struct ksz_port *p = &dev->ports[addr];
 321
 322                switch (reg) {
 323                case MII_BMCR:
 324                        val = 0x1140;
 325                        break;
 326                case MII_BMSR:
 327                        val = 0x796d;
 328                        break;
 329                case MII_PHYSID1:
 330                        val = 0x0022;
 331                        break;
 332                case MII_PHYSID2:
 333                        val = 0x1631;
 334                        break;
 335                case MII_ADVERTISE:
 336                        val = 0x05e1;
 337                        break;
 338                case MII_LPA:
 339                        val = 0xc5e1;
 340                        break;
 341                case MII_CTRL1000:
 342                        val = 0x0700;
 343                        break;
 344                case MII_STAT1000:
 345                        if (p->phydev.speed == SPEED_1000)
 346                                val = 0x3800;
 347                        else
 348                                val = 0;
 349                        break;
 350                }
 351        } else {
 352                ksz_pread16(dev, addr, 0x100 + (reg << 1), &val);
 353        }
 354
 355        return val;
 356}
 357
 358static int ksz9477_phy_write16(struct dsa_switch *ds, int addr, int reg,
 359                               u16 val)
 360{
 361        struct ksz_device *dev = ds->priv;
 362
 363        /* No real PHY after this. */
 364        if (addr >= dev->phy_port_cnt)
 365                return 0;
 366
 367        /* No gigabit support.  Do not write to this register. */
 368        if (!(dev->features & GBIT_SUPPORT) && reg == MII_CTRL1000)
 369                return 0;
 370        ksz_pwrite16(dev, addr, 0x100 + (reg << 1), val);
 371
 372        return 0;
 373}
 374
 375static void ksz9477_get_strings(struct dsa_switch *ds, int port,
 376                                u32 stringset, uint8_t *buf)
 377{
 378        int i;
 379
 380        if (stringset != ETH_SS_STATS)
 381                return;
 382
 383        for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) {
 384                memcpy(buf + i * ETH_GSTRING_LEN, ksz9477_mib_names[i].string,
 385                       ETH_GSTRING_LEN);
 386        }
 387}
 388
 389static void ksz9477_cfg_port_member(struct ksz_device *dev, int port,
 390                                    u8 member)
 391{
 392        ksz_pwrite32(dev, port, REG_PORT_VLAN_MEMBERSHIP__4, member);
 393        dev->ports[port].member = member;
 394}
 395
 396static void ksz9477_port_stp_state_set(struct dsa_switch *ds, int port,
 397                                       u8 state)
 398{
 399        struct ksz_device *dev = ds->priv;
 400        struct ksz_port *p = &dev->ports[port];
 401        u8 data;
 402        int member = -1;
 403        int forward = dev->member;
 404
 405        ksz_pread8(dev, port, P_STP_CTRL, &data);
 406        data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE);
 407
 408        switch (state) {
 409        case BR_STATE_DISABLED:
 410                data |= PORT_LEARN_DISABLE;
 411                if (port != dev->cpu_port)
 412                        member = 0;
 413                break;
 414        case BR_STATE_LISTENING:
 415                data |= (PORT_RX_ENABLE | PORT_LEARN_DISABLE);
 416                if (port != dev->cpu_port &&
 417                    p->stp_state == BR_STATE_DISABLED)
 418                        member = dev->host_mask | p->vid_member;
 419                break;
 420        case BR_STATE_LEARNING:
 421                data |= PORT_RX_ENABLE;
 422                break;
 423        case BR_STATE_FORWARDING:
 424                data |= (PORT_TX_ENABLE | PORT_RX_ENABLE);
 425
 426                /* This function is also used internally. */
 427                if (port == dev->cpu_port)
 428                        break;
 429
 430                member = dev->host_mask | p->vid_member;
 431                mutex_lock(&dev->dev_mutex);
 432
 433                /* Port is a member of a bridge. */
 434                if (dev->br_member & (1 << port)) {
 435                        dev->member |= (1 << port);
 436                        member = dev->member;
 437                }
 438                mutex_unlock(&dev->dev_mutex);
 439                break;
 440        case BR_STATE_BLOCKING:
 441                data |= PORT_LEARN_DISABLE;
 442                if (port != dev->cpu_port &&
 443                    p->stp_state == BR_STATE_DISABLED)
 444                        member = dev->host_mask | p->vid_member;
 445                break;
 446        default:
 447                dev_err(ds->dev, "invalid STP state: %d\n", state);
 448                return;
 449        }
 450
 451        ksz_pwrite8(dev, port, P_STP_CTRL, data);
 452        p->stp_state = state;
 453        mutex_lock(&dev->dev_mutex);
 454        if (data & PORT_RX_ENABLE)
 455                dev->rx_ports |= (1 << port);
 456        else
 457                dev->rx_ports &= ~(1 << port);
 458        if (data & PORT_TX_ENABLE)
 459                dev->tx_ports |= (1 << port);
 460        else
 461                dev->tx_ports &= ~(1 << port);
 462
 463        /* Port membership may share register with STP state. */
 464        if (member >= 0 && member != p->member)
 465                ksz9477_cfg_port_member(dev, port, (u8)member);
 466
 467        /* Check if forwarding needs to be updated. */
 468        if (state != BR_STATE_FORWARDING) {
 469                if (dev->br_member & (1 << port))
 470                        dev->member &= ~(1 << port);
 471        }
 472
 473        /* When topology has changed the function ksz_update_port_member
 474         * should be called to modify port forwarding behavior.
 475         */
 476        if (forward != dev->member)
 477                ksz_update_port_member(dev, port);
 478        mutex_unlock(&dev->dev_mutex);
 479}
 480
 481static void ksz9477_flush_dyn_mac_table(struct ksz_device *dev, int port)
 482{
 483        u8 data;
 484
 485        regmap_update_bits(dev->regmap[0], REG_SW_LUE_CTRL_2,
 486                           SW_FLUSH_OPTION_M << SW_FLUSH_OPTION_S,
 487                           SW_FLUSH_OPTION_DYN_MAC << SW_FLUSH_OPTION_S);
 488
 489        if (port < dev->mib_port_cnt) {
 490                /* flush individual port */
 491                ksz_pread8(dev, port, P_STP_CTRL, &data);
 492                if (!(data & PORT_LEARN_DISABLE))
 493                        ksz_pwrite8(dev, port, P_STP_CTRL,
 494                                    data | PORT_LEARN_DISABLE);
 495                ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_DYN_MAC_TABLE, true);
 496                ksz_pwrite8(dev, port, P_STP_CTRL, data);
 497        } else {
 498                /* flush all */
 499                ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_STP_TABLE, true);
 500        }
 501}
 502
 503static int ksz9477_port_vlan_filtering(struct dsa_switch *ds, int port,
 504                                       bool flag)
 505{
 506        struct ksz_device *dev = ds->priv;
 507
 508        if (flag) {
 509                ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL,
 510                             PORT_VLAN_LOOKUP_VID_0, true);
 511                ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, true);
 512        } else {
 513                ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, false);
 514                ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL,
 515                             PORT_VLAN_LOOKUP_VID_0, false);
 516        }
 517
 518        return 0;
 519}
 520
 521static void ksz9477_port_vlan_add(struct dsa_switch *ds, int port,
 522                                  const struct switchdev_obj_port_vlan *vlan)
 523{
 524        struct ksz_device *dev = ds->priv;
 525        u32 vlan_table[3];
 526        u16 vid;
 527        bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
 528
 529        for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
 530                if (ksz9477_get_vlan_table(dev, vid, vlan_table)) {
 531                        dev_dbg(dev->dev, "Failed to get vlan table\n");
 532                        return;
 533                }
 534
 535                vlan_table[0] = VLAN_VALID | (vid & VLAN_FID_M);
 536                if (untagged)
 537                        vlan_table[1] |= BIT(port);
 538                else
 539                        vlan_table[1] &= ~BIT(port);
 540                vlan_table[1] &= ~(BIT(dev->cpu_port));
 541
 542                vlan_table[2] |= BIT(port) | BIT(dev->cpu_port);
 543
 544                if (ksz9477_set_vlan_table(dev, vid, vlan_table)) {
 545                        dev_dbg(dev->dev, "Failed to set vlan table\n");
 546                        return;
 547                }
 548
 549                /* change PVID */
 550                if (vlan->flags & BRIDGE_VLAN_INFO_PVID)
 551                        ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, vid);
 552        }
 553}
 554
 555static int ksz9477_port_vlan_del(struct dsa_switch *ds, int port,
 556                                 const struct switchdev_obj_port_vlan *vlan)
 557{
 558        struct ksz_device *dev = ds->priv;
 559        bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
 560        u32 vlan_table[3];
 561        u16 vid;
 562        u16 pvid;
 563
 564        ksz_pread16(dev, port, REG_PORT_DEFAULT_VID, &pvid);
 565        pvid = pvid & 0xFFF;
 566
 567        for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
 568                if (ksz9477_get_vlan_table(dev, vid, vlan_table)) {
 569                        dev_dbg(dev->dev, "Failed to get vlan table\n");
 570                        return -ETIMEDOUT;
 571                }
 572
 573                vlan_table[2] &= ~BIT(port);
 574
 575                if (pvid == vid)
 576                        pvid = 1;
 577
 578                if (untagged)
 579                        vlan_table[1] &= ~BIT(port);
 580
 581                if (ksz9477_set_vlan_table(dev, vid, vlan_table)) {
 582                        dev_dbg(dev->dev, "Failed to set vlan table\n");
 583                        return -ETIMEDOUT;
 584                }
 585        }
 586
 587        ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, pvid);
 588
 589        return 0;
 590}
 591
 592static int ksz9477_port_fdb_add(struct dsa_switch *ds, int port,
 593                                const unsigned char *addr, u16 vid)
 594{
 595        struct ksz_device *dev = ds->priv;
 596        u32 alu_table[4];
 597        u32 data;
 598        int ret = 0;
 599
 600        mutex_lock(&dev->alu_mutex);
 601
 602        /* find any entry with mac & vid */
 603        data = vid << ALU_FID_INDEX_S;
 604        data |= ((addr[0] << 8) | addr[1]);
 605        ksz_write32(dev, REG_SW_ALU_INDEX_0, data);
 606
 607        data = ((addr[2] << 24) | (addr[3] << 16));
 608        data |= ((addr[4] << 8) | addr[5]);
 609        ksz_write32(dev, REG_SW_ALU_INDEX_1, data);
 610
 611        /* start read operation */
 612        ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START);
 613
 614        /* wait to be finished */
 615        ret = ksz9477_wait_alu_ready(dev);
 616        if (ret) {
 617                dev_dbg(dev->dev, "Failed to read ALU\n");
 618                goto exit;
 619        }
 620
 621        /* read ALU entry */
 622        ksz9477_read_table(dev, alu_table);
 623
 624        /* update ALU entry */
 625        alu_table[0] = ALU_V_STATIC_VALID;
 626        alu_table[1] |= BIT(port);
 627        if (vid)
 628                alu_table[1] |= ALU_V_USE_FID;
 629        alu_table[2] = (vid << ALU_V_FID_S);
 630        alu_table[2] |= ((addr[0] << 8) | addr[1]);
 631        alu_table[3] = ((addr[2] << 24) | (addr[3] << 16));
 632        alu_table[3] |= ((addr[4] << 8) | addr[5]);
 633
 634        ksz9477_write_table(dev, alu_table);
 635
 636        ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START);
 637
 638        /* wait to be finished */
 639        ret = ksz9477_wait_alu_ready(dev);
 640        if (ret)
 641                dev_dbg(dev->dev, "Failed to write ALU\n");
 642
 643exit:
 644        mutex_unlock(&dev->alu_mutex);
 645
 646        return ret;
 647}
 648
 649static int ksz9477_port_fdb_del(struct dsa_switch *ds, int port,
 650                                const unsigned char *addr, u16 vid)
 651{
 652        struct ksz_device *dev = ds->priv;
 653        u32 alu_table[4];
 654        u32 data;
 655        int ret = 0;
 656
 657        mutex_lock(&dev->alu_mutex);
 658
 659        /* read any entry with mac & vid */
 660        data = vid << ALU_FID_INDEX_S;
 661        data |= ((addr[0] << 8) | addr[1]);
 662        ksz_write32(dev, REG_SW_ALU_INDEX_0, data);
 663
 664        data = ((addr[2] << 24) | (addr[3] << 16));
 665        data |= ((addr[4] << 8) | addr[5]);
 666        ksz_write32(dev, REG_SW_ALU_INDEX_1, data);
 667
 668        /* start read operation */
 669        ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START);
 670
 671        /* wait to be finished */
 672        ret = ksz9477_wait_alu_ready(dev);
 673        if (ret) {
 674                dev_dbg(dev->dev, "Failed to read ALU\n");
 675                goto exit;
 676        }
 677
 678        ksz_read32(dev, REG_SW_ALU_VAL_A, &alu_table[0]);
 679        if (alu_table[0] & ALU_V_STATIC_VALID) {
 680                ksz_read32(dev, REG_SW_ALU_VAL_B, &alu_table[1]);
 681                ksz_read32(dev, REG_SW_ALU_VAL_C, &alu_table[2]);
 682                ksz_read32(dev, REG_SW_ALU_VAL_D, &alu_table[3]);
 683
 684                /* clear forwarding port */
 685                alu_table[2] &= ~BIT(port);
 686
 687                /* if there is no port to forward, clear table */
 688                if ((alu_table[2] & ALU_V_PORT_MAP) == 0) {
 689                        alu_table[0] = 0;
 690                        alu_table[1] = 0;
 691                        alu_table[2] = 0;
 692                        alu_table[3] = 0;
 693                }
 694        } else {
 695                alu_table[0] = 0;
 696                alu_table[1] = 0;
 697                alu_table[2] = 0;
 698                alu_table[3] = 0;
 699        }
 700
 701        ksz9477_write_table(dev, alu_table);
 702
 703        ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START);
 704
 705        /* wait to be finished */
 706        ret = ksz9477_wait_alu_ready(dev);
 707        if (ret)
 708                dev_dbg(dev->dev, "Failed to write ALU\n");
 709
 710exit:
 711        mutex_unlock(&dev->alu_mutex);
 712
 713        return ret;
 714}
 715
 716static void ksz9477_convert_alu(struct alu_struct *alu, u32 *alu_table)
 717{
 718        alu->is_static = !!(alu_table[0] & ALU_V_STATIC_VALID);
 719        alu->is_src_filter = !!(alu_table[0] & ALU_V_SRC_FILTER);
 720        alu->is_dst_filter = !!(alu_table[0] & ALU_V_DST_FILTER);
 721        alu->prio_age = (alu_table[0] >> ALU_V_PRIO_AGE_CNT_S) &
 722                        ALU_V_PRIO_AGE_CNT_M;
 723        alu->mstp = alu_table[0] & ALU_V_MSTP_M;
 724
 725        alu->is_override = !!(alu_table[1] & ALU_V_OVERRIDE);
 726        alu->is_use_fid = !!(alu_table[1] & ALU_V_USE_FID);
 727        alu->port_forward = alu_table[1] & ALU_V_PORT_MAP;
 728
 729        alu->fid = (alu_table[2] >> ALU_V_FID_S) & ALU_V_FID_M;
 730
 731        alu->mac[0] = (alu_table[2] >> 8) & 0xFF;
 732        alu->mac[1] = alu_table[2] & 0xFF;
 733        alu->mac[2] = (alu_table[3] >> 24) & 0xFF;
 734        alu->mac[3] = (alu_table[3] >> 16) & 0xFF;
 735        alu->mac[4] = (alu_table[3] >> 8) & 0xFF;
 736        alu->mac[5] = alu_table[3] & 0xFF;
 737}
 738
 739static int ksz9477_port_fdb_dump(struct dsa_switch *ds, int port,
 740                                 dsa_fdb_dump_cb_t *cb, void *data)
 741{
 742        struct ksz_device *dev = ds->priv;
 743        int ret = 0;
 744        u32 ksz_data;
 745        u32 alu_table[4];
 746        struct alu_struct alu;
 747        int timeout;
 748
 749        mutex_lock(&dev->alu_mutex);
 750
 751        /* start ALU search */
 752        ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_START | ALU_SEARCH);
 753
 754        do {
 755                timeout = 1000;
 756                do {
 757                        ksz_read32(dev, REG_SW_ALU_CTRL__4, &ksz_data);
 758                        if ((ksz_data & ALU_VALID) || !(ksz_data & ALU_START))
 759                                break;
 760                        usleep_range(1, 10);
 761                } while (timeout-- > 0);
 762
 763                if (!timeout) {
 764                        dev_dbg(dev->dev, "Failed to search ALU\n");
 765                        ret = -ETIMEDOUT;
 766                        goto exit;
 767                }
 768
 769                /* read ALU table */
 770                ksz9477_read_table(dev, alu_table);
 771
 772                ksz9477_convert_alu(&alu, alu_table);
 773
 774                if (alu.port_forward & BIT(port)) {
 775                        ret = cb(alu.mac, alu.fid, alu.is_static, data);
 776                        if (ret)
 777                                goto exit;
 778                }
 779        } while (ksz_data & ALU_START);
 780
 781exit:
 782
 783        /* stop ALU search */
 784        ksz_write32(dev, REG_SW_ALU_CTRL__4, 0);
 785
 786        mutex_unlock(&dev->alu_mutex);
 787
 788        return ret;
 789}
 790
 791static void ksz9477_port_mdb_add(struct dsa_switch *ds, int port,
 792                                 const struct switchdev_obj_port_mdb *mdb)
 793{
 794        struct ksz_device *dev = ds->priv;
 795        u32 static_table[4];
 796        u32 data;
 797        int index;
 798        u32 mac_hi, mac_lo;
 799
 800        mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]);
 801        mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16));
 802        mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]);
 803
 804        mutex_lock(&dev->alu_mutex);
 805
 806        for (index = 0; index < dev->num_statics; index++) {
 807                /* find empty slot first */
 808                data = (index << ALU_STAT_INDEX_S) |
 809                        ALU_STAT_READ | ALU_STAT_START;
 810                ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
 811
 812                /* wait to be finished */
 813                if (ksz9477_wait_alu_sta_ready(dev)) {
 814                        dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
 815                        goto exit;
 816                }
 817
 818                /* read ALU static table */
 819                ksz9477_read_table(dev, static_table);
 820
 821                if (static_table[0] & ALU_V_STATIC_VALID) {
 822                        /* check this has same vid & mac address */
 823                        if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) &&
 824                            ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) &&
 825                            static_table[3] == mac_lo) {
 826                                /* found matching one */
 827                                break;
 828                        }
 829                } else {
 830                        /* found empty one */
 831                        break;
 832                }
 833        }
 834
 835        /* no available entry */
 836        if (index == dev->num_statics)
 837                goto exit;
 838
 839        /* add entry */
 840        static_table[0] = ALU_V_STATIC_VALID;
 841        static_table[1] |= BIT(port);
 842        if (mdb->vid)
 843                static_table[1] |= ALU_V_USE_FID;
 844        static_table[2] = (mdb->vid << ALU_V_FID_S);
 845        static_table[2] |= mac_hi;
 846        static_table[3] = mac_lo;
 847
 848        ksz9477_write_table(dev, static_table);
 849
 850        data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START;
 851        ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
 852
 853        /* wait to be finished */
 854        if (ksz9477_wait_alu_sta_ready(dev))
 855                dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
 856
 857exit:
 858        mutex_unlock(&dev->alu_mutex);
 859}
 860
 861static int ksz9477_port_mdb_del(struct dsa_switch *ds, int port,
 862                                const struct switchdev_obj_port_mdb *mdb)
 863{
 864        struct ksz_device *dev = ds->priv;
 865        u32 static_table[4];
 866        u32 data;
 867        int index;
 868        int ret = 0;
 869        u32 mac_hi, mac_lo;
 870
 871        mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]);
 872        mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16));
 873        mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]);
 874
 875        mutex_lock(&dev->alu_mutex);
 876
 877        for (index = 0; index < dev->num_statics; index++) {
 878                /* find empty slot first */
 879                data = (index << ALU_STAT_INDEX_S) |
 880                        ALU_STAT_READ | ALU_STAT_START;
 881                ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
 882
 883                /* wait to be finished */
 884                ret = ksz9477_wait_alu_sta_ready(dev);
 885                if (ret) {
 886                        dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
 887                        goto exit;
 888                }
 889
 890                /* read ALU static table */
 891                ksz9477_read_table(dev, static_table);
 892
 893                if (static_table[0] & ALU_V_STATIC_VALID) {
 894                        /* check this has same vid & mac address */
 895
 896                        if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) &&
 897                            ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) &&
 898                            static_table[3] == mac_lo) {
 899                                /* found matching one */
 900                                break;
 901                        }
 902                }
 903        }
 904
 905        /* no available entry */
 906        if (index == dev->num_statics)
 907                goto exit;
 908
 909        /* clear port */
 910        static_table[1] &= ~BIT(port);
 911
 912        if ((static_table[1] & ALU_V_PORT_MAP) == 0) {
 913                /* delete entry */
 914                static_table[0] = 0;
 915                static_table[1] = 0;
 916                static_table[2] = 0;
 917                static_table[3] = 0;
 918        }
 919
 920        ksz9477_write_table(dev, static_table);
 921
 922        data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START;
 923        ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
 924
 925        /* wait to be finished */
 926        ret = ksz9477_wait_alu_sta_ready(dev);
 927        if (ret)
 928                dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
 929
 930exit:
 931        mutex_unlock(&dev->alu_mutex);
 932
 933        return ret;
 934}
 935
 936static int ksz9477_port_mirror_add(struct dsa_switch *ds, int port,
 937                                   struct dsa_mall_mirror_tc_entry *mirror,
 938                                   bool ingress)
 939{
 940        struct ksz_device *dev = ds->priv;
 941
 942        if (ingress)
 943                ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, true);
 944        else
 945                ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, true);
 946
 947        ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_SNIFFER, false);
 948
 949        /* configure mirror port */
 950        ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
 951                     PORT_MIRROR_SNIFFER, true);
 952
 953        ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false);
 954
 955        return 0;
 956}
 957
 958static void ksz9477_port_mirror_del(struct dsa_switch *ds, int port,
 959                                    struct dsa_mall_mirror_tc_entry *mirror)
 960{
 961        struct ksz_device *dev = ds->priv;
 962        u8 data;
 963
 964        if (mirror->ingress)
 965                ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, false);
 966        else
 967                ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, false);
 968
 969        ksz_pread8(dev, port, P_MIRROR_CTRL, &data);
 970
 971        if (!(data & (PORT_MIRROR_RX | PORT_MIRROR_TX)))
 972                ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
 973                             PORT_MIRROR_SNIFFER, false);
 974}
 975
 976static void ksz9477_phy_setup(struct ksz_device *dev, int port,
 977                              struct phy_device *phy)
 978{
 979        /* Only apply to port with PHY. */
 980        if (port >= dev->phy_port_cnt)
 981                return;
 982
 983        /* The MAC actually cannot run in 1000 half-duplex mode. */
 984        phy_remove_link_mode(phy,
 985                             ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
 986
 987        /* PHY does not support gigabit. */
 988        if (!(dev->features & GBIT_SUPPORT))
 989                phy_remove_link_mode(phy,
 990                                     ETHTOOL_LINK_MODE_1000baseT_Full_BIT);
 991}
 992
 993static bool ksz9477_get_gbit(struct ksz_device *dev, u8 data)
 994{
 995        bool gbit;
 996
 997        if (dev->features & NEW_XMII)
 998                gbit = !(data & PORT_MII_NOT_1GBIT);
 999        else
1000                gbit = !!(data & PORT_MII_1000MBIT_S1);
1001        return gbit;
1002}
1003
1004static void ksz9477_set_gbit(struct ksz_device *dev, bool gbit, u8 *data)
1005{
1006        if (dev->features & NEW_XMII) {
1007                if (gbit)
1008                        *data &= ~PORT_MII_NOT_1GBIT;
1009                else
1010                        *data |= PORT_MII_NOT_1GBIT;
1011        } else {
1012                if (gbit)
1013                        *data |= PORT_MII_1000MBIT_S1;
1014                else
1015                        *data &= ~PORT_MII_1000MBIT_S1;
1016        }
1017}
1018
1019static int ksz9477_get_xmii(struct ksz_device *dev, u8 data)
1020{
1021        int mode;
1022
1023        if (dev->features & NEW_XMII) {
1024                switch (data & PORT_MII_SEL_M) {
1025                case PORT_MII_SEL:
1026                        mode = 0;
1027                        break;
1028                case PORT_RMII_SEL:
1029                        mode = 1;
1030                        break;
1031                case PORT_GMII_SEL:
1032                        mode = 2;
1033                        break;
1034                default:
1035                        mode = 3;
1036                }
1037        } else {
1038                switch (data & PORT_MII_SEL_M) {
1039                case PORT_MII_SEL_S1:
1040                        mode = 0;
1041                        break;
1042                case PORT_RMII_SEL_S1:
1043                        mode = 1;
1044                        break;
1045                case PORT_GMII_SEL_S1:
1046                        mode = 2;
1047                        break;
1048                default:
1049                        mode = 3;
1050                }
1051        }
1052        return mode;
1053}
1054
1055static void ksz9477_set_xmii(struct ksz_device *dev, int mode, u8 *data)
1056{
1057        u8 xmii;
1058
1059        if (dev->features & NEW_XMII) {
1060                switch (mode) {
1061                case 0:
1062                        xmii = PORT_MII_SEL;
1063                        break;
1064                case 1:
1065                        xmii = PORT_RMII_SEL;
1066                        break;
1067                case 2:
1068                        xmii = PORT_GMII_SEL;
1069                        break;
1070                default:
1071                        xmii = PORT_RGMII_SEL;
1072                        break;
1073                }
1074        } else {
1075                switch (mode) {
1076                case 0:
1077                        xmii = PORT_MII_SEL_S1;
1078                        break;
1079                case 1:
1080                        xmii = PORT_RMII_SEL_S1;
1081                        break;
1082                case 2:
1083                        xmii = PORT_GMII_SEL_S1;
1084                        break;
1085                default:
1086                        xmii = PORT_RGMII_SEL_S1;
1087                        break;
1088                }
1089        }
1090        *data &= ~PORT_MII_SEL_M;
1091        *data |= xmii;
1092}
1093
1094static phy_interface_t ksz9477_get_interface(struct ksz_device *dev, int port)
1095{
1096        phy_interface_t interface;
1097        bool gbit;
1098        int mode;
1099        u8 data8;
1100
1101        if (port < dev->phy_port_cnt)
1102                return PHY_INTERFACE_MODE_NA;
1103        ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8);
1104        gbit = ksz9477_get_gbit(dev, data8);
1105        mode = ksz9477_get_xmii(dev, data8);
1106        switch (mode) {
1107        case 2:
1108                interface = PHY_INTERFACE_MODE_GMII;
1109                if (gbit)
1110                        break;
1111                /* fall through */
1112        case 0:
1113                interface = PHY_INTERFACE_MODE_MII;
1114                break;
1115        case 1:
1116                interface = PHY_INTERFACE_MODE_RMII;
1117                break;
1118        default:
1119                interface = PHY_INTERFACE_MODE_RGMII;
1120                if (data8 & PORT_RGMII_ID_EG_ENABLE)
1121                        interface = PHY_INTERFACE_MODE_RGMII_TXID;
1122                if (data8 & PORT_RGMII_ID_IG_ENABLE) {
1123                        interface = PHY_INTERFACE_MODE_RGMII_RXID;
1124                        if (data8 & PORT_RGMII_ID_EG_ENABLE)
1125                                interface = PHY_INTERFACE_MODE_RGMII_ID;
1126                }
1127                break;
1128        }
1129        return interface;
1130}
1131
1132static void ksz9477_port_mmd_write(struct ksz_device *dev, int port,
1133                                   u8 dev_addr, u16 reg_addr, u16 val)
1134{
1135        ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_SETUP,
1136                     MMD_SETUP(PORT_MMD_OP_INDEX, dev_addr));
1137        ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_INDEX_DATA, reg_addr);
1138        ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_SETUP,
1139                     MMD_SETUP(PORT_MMD_OP_DATA_NO_INCR, dev_addr));
1140        ksz_pwrite16(dev, port, REG_PORT_PHY_MMD_INDEX_DATA, val);
1141}
1142
1143static void ksz9477_phy_errata_setup(struct ksz_device *dev, int port)
1144{
1145        /* Apply PHY settings to address errata listed in
1146         * KSZ9477, KSZ9897, KSZ9896, KSZ9567, KSZ8565
1147         * Silicon Errata and Data Sheet Clarification documents:
1148         *
1149         * Register settings are needed to improve PHY receive performance
1150         */
1151        ksz9477_port_mmd_write(dev, port, 0x01, 0x6f, 0xdd0b);
1152        ksz9477_port_mmd_write(dev, port, 0x01, 0x8f, 0x6032);
1153        ksz9477_port_mmd_write(dev, port, 0x01, 0x9d, 0x248c);
1154        ksz9477_port_mmd_write(dev, port, 0x01, 0x75, 0x0060);
1155        ksz9477_port_mmd_write(dev, port, 0x01, 0xd3, 0x7777);
1156        ksz9477_port_mmd_write(dev, port, 0x1c, 0x06, 0x3008);
1157        ksz9477_port_mmd_write(dev, port, 0x1c, 0x08, 0x2001);
1158
1159        /* Transmit waveform amplitude can be improved
1160         * (1000BASE-T, 100BASE-TX, 10BASE-Te)
1161         */
1162        ksz9477_port_mmd_write(dev, port, 0x1c, 0x04, 0x00d0);
1163
1164        /* Energy Efficient Ethernet (EEE) feature select must
1165         * be manually disabled (except on KSZ8565 which is 100Mbit)
1166         */
1167        if (dev->features & GBIT_SUPPORT)
1168                ksz9477_port_mmd_write(dev, port, 0x07, 0x3c, 0x0000);
1169
1170        /* Register settings are required to meet data sheet
1171         * supply current specifications
1172         */
1173        ksz9477_port_mmd_write(dev, port, 0x1c, 0x13, 0x6eff);
1174        ksz9477_port_mmd_write(dev, port, 0x1c, 0x14, 0xe6ff);
1175        ksz9477_port_mmd_write(dev, port, 0x1c, 0x15, 0x6eff);
1176        ksz9477_port_mmd_write(dev, port, 0x1c, 0x16, 0xe6ff);
1177        ksz9477_port_mmd_write(dev, port, 0x1c, 0x17, 0x00ff);
1178        ksz9477_port_mmd_write(dev, port, 0x1c, 0x18, 0x43ff);
1179        ksz9477_port_mmd_write(dev, port, 0x1c, 0x19, 0xc3ff);
1180        ksz9477_port_mmd_write(dev, port, 0x1c, 0x1a, 0x6fff);
1181        ksz9477_port_mmd_write(dev, port, 0x1c, 0x1b, 0x07ff);
1182        ksz9477_port_mmd_write(dev, port, 0x1c, 0x1c, 0x0fff);
1183        ksz9477_port_mmd_write(dev, port, 0x1c, 0x1d, 0xe7ff);
1184        ksz9477_port_mmd_write(dev, port, 0x1c, 0x1e, 0xefff);
1185        ksz9477_port_mmd_write(dev, port, 0x1c, 0x20, 0xeeee);
1186}
1187
1188static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
1189{
1190        u8 data8;
1191        u8 member;
1192        u16 data16;
1193        struct ksz_port *p = &dev->ports[port];
1194
1195        /* enable tag tail for host port */
1196        if (cpu_port)
1197                ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_TAIL_TAG_ENABLE,
1198                             true);
1199
1200        ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, false);
1201
1202        /* set back pressure */
1203        ksz_port_cfg(dev, port, REG_PORT_MAC_CTRL_1, PORT_BACK_PRESSURE, true);
1204
1205        /* enable broadcast storm limit */
1206        ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true);
1207
1208        /* disable DiffServ priority */
1209        ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_PRIO_ENABLE, false);
1210
1211        /* replace priority */
1212        ksz_port_cfg(dev, port, REG_PORT_MRI_MAC_CTRL, PORT_USER_PRIO_CEILING,
1213                     false);
1214        ksz9477_port_cfg32(dev, port, REG_PORT_MTI_QUEUE_CTRL_0__4,
1215                           MTI_PVID_REPLACE, false);
1216
1217        /* enable 802.1p priority */
1218        ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true);
1219
1220        if (port < dev->phy_port_cnt) {
1221                /* do not force flow control */
1222                ksz_port_cfg(dev, port, REG_PORT_CTRL_0,
1223                             PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL,
1224                             false);
1225
1226                if (dev->phy_errata_9477)
1227                        ksz9477_phy_errata_setup(dev, port);
1228        } else {
1229                /* force flow control */
1230                ksz_port_cfg(dev, port, REG_PORT_CTRL_0,
1231                             PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL,
1232                             true);
1233
1234                /* configure MAC to 1G & RGMII mode */
1235                ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8);
1236                switch (dev->interface) {
1237                case PHY_INTERFACE_MODE_MII:
1238                        ksz9477_set_xmii(dev, 0, &data8);
1239                        ksz9477_set_gbit(dev, false, &data8);
1240                        p->phydev.speed = SPEED_100;
1241                        break;
1242                case PHY_INTERFACE_MODE_RMII:
1243                        ksz9477_set_xmii(dev, 1, &data8);
1244                        ksz9477_set_gbit(dev, false, &data8);
1245                        p->phydev.speed = SPEED_100;
1246                        break;
1247                case PHY_INTERFACE_MODE_GMII:
1248                        ksz9477_set_xmii(dev, 2, &data8);
1249                        ksz9477_set_gbit(dev, true, &data8);
1250                        p->phydev.speed = SPEED_1000;
1251                        break;
1252                default:
1253                        ksz9477_set_xmii(dev, 3, &data8);
1254                        ksz9477_set_gbit(dev, true, &data8);
1255                        data8 &= ~PORT_RGMII_ID_IG_ENABLE;
1256                        data8 &= ~PORT_RGMII_ID_EG_ENABLE;
1257                        if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
1258                            dev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
1259                                data8 |= PORT_RGMII_ID_IG_ENABLE;
1260                        if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
1261                            dev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
1262                                data8 |= PORT_RGMII_ID_EG_ENABLE;
1263                        p->phydev.speed = SPEED_1000;
1264                        break;
1265                }
1266                ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_1, data8);
1267                p->phydev.duplex = 1;
1268        }
1269        mutex_lock(&dev->dev_mutex);
1270        if (cpu_port) {
1271                member = dev->port_mask;
1272                dev->on_ports = dev->host_mask;
1273                dev->live_ports = dev->host_mask;
1274        } else {
1275                member = dev->host_mask | p->vid_member;
1276                dev->on_ports |= (1 << port);
1277
1278                /* Link was detected before port is enabled. */
1279                if (p->phydev.link)
1280                        dev->live_ports |= (1 << port);
1281        }
1282        mutex_unlock(&dev->dev_mutex);
1283        ksz9477_cfg_port_member(dev, port, member);
1284
1285        /* clear pending interrupts */
1286        if (port < dev->phy_port_cnt)
1287                ksz_pread16(dev, port, REG_PORT_PHY_INT_ENABLE, &data16);
1288}
1289
1290static void ksz9477_config_cpu_port(struct dsa_switch *ds)
1291{
1292        struct ksz_device *dev = ds->priv;
1293        struct ksz_port *p;
1294        int i;
1295
1296        ds->num_ports = dev->port_cnt;
1297
1298        for (i = 0; i < dev->port_cnt; i++) {
1299                if (dsa_is_cpu_port(ds, i) && (dev->cpu_ports & (1 << i))) {
1300                        phy_interface_t interface;
1301
1302                        dev->cpu_port = i;
1303                        dev->host_mask = (1 << dev->cpu_port);
1304                        dev->port_mask |= dev->host_mask;
1305
1306                        /* Read from XMII register to determine host port
1307                         * interface.  If set specifically in device tree
1308                         * note the difference to help debugging.
1309                         */
1310                        interface = ksz9477_get_interface(dev, i);
1311                        if (!dev->interface)
1312                                dev->interface = interface;
1313                        if (interface && interface != dev->interface)
1314                                dev_info(dev->dev,
1315                                         "use %s instead of %s\n",
1316                                          phy_modes(dev->interface),
1317                                          phy_modes(interface));
1318
1319                        /* enable cpu port */
1320                        ksz9477_port_setup(dev, i, true);
1321                        p = &dev->ports[dev->cpu_port];
1322                        p->vid_member = dev->port_mask;
1323                        p->on = 1;
1324                }
1325        }
1326
1327        dev->member = dev->host_mask;
1328
1329        for (i = 0; i < dev->mib_port_cnt; i++) {
1330                if (i == dev->cpu_port)
1331                        continue;
1332                p = &dev->ports[i];
1333
1334                /* Initialize to non-zero so that ksz_cfg_port_member() will
1335                 * be called.
1336                 */
1337                p->vid_member = (1 << i);
1338                p->member = dev->port_mask;
1339                ksz9477_port_stp_state_set(ds, i, BR_STATE_DISABLED);
1340                p->on = 1;
1341                if (i < dev->phy_port_cnt)
1342                        p->phy = 1;
1343                if (dev->chip_id == 0x00947700 && i == 6) {
1344                        p->sgmii = 1;
1345
1346                        /* SGMII PHY detection code is not implemented yet. */
1347                        p->phy = 0;
1348                }
1349        }
1350}
1351
1352static int ksz9477_setup(struct dsa_switch *ds)
1353{
1354        struct ksz_device *dev = ds->priv;
1355        int ret = 0;
1356
1357        dev->vlan_cache = devm_kcalloc(dev->dev, sizeof(struct vlan_table),
1358                                       dev->num_vlans, GFP_KERNEL);
1359        if (!dev->vlan_cache)
1360                return -ENOMEM;
1361
1362        ret = ksz9477_reset_switch(dev);
1363        if (ret) {
1364                dev_err(ds->dev, "failed to reset switch\n");
1365                return ret;
1366        }
1367
1368        /* Required for port partitioning. */
1369        ksz9477_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY,
1370                      true);
1371
1372        /* Do not work correctly with tail tagging. */
1373        ksz_cfg(dev, REG_SW_MAC_CTRL_0, SW_CHECK_LENGTH, false);
1374
1375        /* accept packet up to 2000bytes */
1376        ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_LEGAL_PACKET_DISABLE, true);
1377
1378        ksz9477_config_cpu_port(ds);
1379
1380        ksz_cfg(dev, REG_SW_MAC_CTRL_1, MULTICAST_STORM_DISABLE, true);
1381
1382        /* queue based egress rate limit */
1383        ksz_cfg(dev, REG_SW_MAC_CTRL_5, SW_OUT_RATE_LIMIT_QUEUE_BASED, true);
1384
1385        /* enable global MIB counter freeze function */
1386        ksz_cfg(dev, REG_SW_MAC_CTRL_6, SW_MIB_COUNTER_FREEZE, true);
1387
1388        /* start switch */
1389        ksz_cfg(dev, REG_SW_OPERATION, SW_START, true);
1390
1391        ksz_init_mib_timer(dev);
1392
1393        return 0;
1394}
1395
1396static const struct dsa_switch_ops ksz9477_switch_ops = {
1397        .get_tag_protocol       = ksz9477_get_tag_protocol,
1398        .setup                  = ksz9477_setup,
1399        .phy_read               = ksz9477_phy_read16,
1400        .phy_write              = ksz9477_phy_write16,
1401        .adjust_link            = ksz_adjust_link,
1402        .port_enable            = ksz_enable_port,
1403        .port_disable           = ksz_disable_port,
1404        .get_strings            = ksz9477_get_strings,
1405        .get_ethtool_stats      = ksz_get_ethtool_stats,
1406        .get_sset_count         = ksz_sset_count,
1407        .port_bridge_join       = ksz_port_bridge_join,
1408        .port_bridge_leave      = ksz_port_bridge_leave,
1409        .port_stp_state_set     = ksz9477_port_stp_state_set,
1410        .port_fast_age          = ksz_port_fast_age,
1411        .port_vlan_filtering    = ksz9477_port_vlan_filtering,
1412        .port_vlan_prepare      = ksz_port_vlan_prepare,
1413        .port_vlan_add          = ksz9477_port_vlan_add,
1414        .port_vlan_del          = ksz9477_port_vlan_del,
1415        .port_fdb_dump          = ksz9477_port_fdb_dump,
1416        .port_fdb_add           = ksz9477_port_fdb_add,
1417        .port_fdb_del           = ksz9477_port_fdb_del,
1418        .port_mdb_prepare       = ksz_port_mdb_prepare,
1419        .port_mdb_add           = ksz9477_port_mdb_add,
1420        .port_mdb_del           = ksz9477_port_mdb_del,
1421        .port_mirror_add        = ksz9477_port_mirror_add,
1422        .port_mirror_del        = ksz9477_port_mirror_del,
1423};
1424
1425static u32 ksz9477_get_port_addr(int port, int offset)
1426{
1427        return PORT_CTRL_ADDR(port, offset);
1428}
1429
1430static int ksz9477_switch_detect(struct ksz_device *dev)
1431{
1432        u8 data8;
1433        u8 id_hi;
1434        u8 id_lo;
1435        u32 id32;
1436        int ret;
1437
1438        /* turn off SPI DO Edge select */
1439        ret = ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8);
1440        if (ret)
1441                return ret;
1442
1443        data8 &= ~SPI_AUTO_EDGE_DETECTION;
1444        ret = ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8);
1445        if (ret)
1446                return ret;
1447
1448        /* read chip id */
1449        ret = ksz_read32(dev, REG_CHIP_ID0__1, &id32);
1450        if (ret)
1451                return ret;
1452        ret = ksz_read8(dev, REG_GLOBAL_OPTIONS, &data8);
1453        if (ret)
1454                return ret;
1455
1456        /* Number of ports can be reduced depending on chip. */
1457        dev->mib_port_cnt = TOTAL_PORT_NUM;
1458        dev->phy_port_cnt = 5;
1459
1460        /* Default capability is gigabit capable. */
1461        dev->features = GBIT_SUPPORT;
1462
1463        id_hi = (u8)(id32 >> 16);
1464        id_lo = (u8)(id32 >> 8);
1465        if ((id_lo & 0xf) == 3) {
1466                /* Chip is from KSZ9893 design. */
1467                dev->features |= IS_9893;
1468
1469                /* Chip does not support gigabit. */
1470                if (data8 & SW_QW_ABLE)
1471                        dev->features &= ~GBIT_SUPPORT;
1472                dev->mib_port_cnt = 3;
1473                dev->phy_port_cnt = 2;
1474        } else {
1475                /* Chip uses new XMII register definitions. */
1476                dev->features |= NEW_XMII;
1477
1478                /* Chip does not support gigabit. */
1479                if (!(data8 & SW_GIGABIT_ABLE))
1480                        dev->features &= ~GBIT_SUPPORT;
1481        }
1482
1483        /* Change chip id to known ones so it can be matched against them. */
1484        id32 = (id_hi << 16) | (id_lo << 8);
1485
1486        dev->chip_id = id32;
1487
1488        return 0;
1489}
1490
1491struct ksz_chip_data {
1492        u32 chip_id;
1493        const char *dev_name;
1494        int num_vlans;
1495        int num_alus;
1496        int num_statics;
1497        int cpu_ports;
1498        int port_cnt;
1499        bool phy_errata_9477;
1500};
1501
1502static const struct ksz_chip_data ksz9477_switch_chips[] = {
1503        {
1504                .chip_id = 0x00947700,
1505                .dev_name = "KSZ9477",
1506                .num_vlans = 4096,
1507                .num_alus = 4096,
1508                .num_statics = 16,
1509                .cpu_ports = 0x7F,      /* can be configured as cpu port */
1510                .port_cnt = 7,          /* total physical port count */
1511                .phy_errata_9477 = true,
1512        },
1513        {
1514                .chip_id = 0x00989700,
1515                .dev_name = "KSZ9897",
1516                .num_vlans = 4096,
1517                .num_alus = 4096,
1518                .num_statics = 16,
1519                .cpu_ports = 0x7F,      /* can be configured as cpu port */
1520                .port_cnt = 7,          /* total physical port count */
1521                .phy_errata_9477 = true,
1522        },
1523        {
1524                .chip_id = 0x00989300,
1525                .dev_name = "KSZ9893",
1526                .num_vlans = 4096,
1527                .num_alus = 4096,
1528                .num_statics = 16,
1529                .cpu_ports = 0x07,      /* can be configured as cpu port */
1530                .port_cnt = 3,          /* total port count */
1531        },
1532        {
1533                .chip_id = 0x00956700,
1534                .dev_name = "KSZ9567",
1535                .num_vlans = 4096,
1536                .num_alus = 4096,
1537                .num_statics = 16,
1538                .cpu_ports = 0x7F,      /* can be configured as cpu port */
1539                .port_cnt = 7,          /* total physical port count */
1540        },
1541};
1542
1543static int ksz9477_switch_init(struct ksz_device *dev)
1544{
1545        int i;
1546
1547        dev->ds->ops = &ksz9477_switch_ops;
1548
1549        for (i = 0; i < ARRAY_SIZE(ksz9477_switch_chips); i++) {
1550                const struct ksz_chip_data *chip = &ksz9477_switch_chips[i];
1551
1552                if (dev->chip_id == chip->chip_id) {
1553                        dev->name = chip->dev_name;
1554                        dev->num_vlans = chip->num_vlans;
1555                        dev->num_alus = chip->num_alus;
1556                        dev->num_statics = chip->num_statics;
1557                        dev->port_cnt = chip->port_cnt;
1558                        dev->cpu_ports = chip->cpu_ports;
1559                        dev->phy_errata_9477 = chip->phy_errata_9477;
1560
1561                        break;
1562                }
1563        }
1564
1565        /* no switch found */
1566        if (!dev->port_cnt)
1567                return -ENODEV;
1568
1569        dev->port_mask = (1 << dev->port_cnt) - 1;
1570
1571        dev->reg_mib_cnt = SWITCH_COUNTER_NUM;
1572        dev->mib_cnt = TOTAL_SWITCH_COUNTER_NUM;
1573
1574        i = dev->mib_port_cnt;
1575        dev->ports = devm_kzalloc(dev->dev, sizeof(struct ksz_port) * i,
1576                                  GFP_KERNEL);
1577        if (!dev->ports)
1578                return -ENOMEM;
1579        for (i = 0; i < dev->mib_port_cnt; i++) {
1580                mutex_init(&dev->ports[i].mib.cnt_mutex);
1581                dev->ports[i].mib.counters =
1582                        devm_kzalloc(dev->dev,
1583                                     sizeof(u64) *
1584                                     (TOTAL_SWITCH_COUNTER_NUM + 1),
1585                                     GFP_KERNEL);
1586                if (!dev->ports[i].mib.counters)
1587                        return -ENOMEM;
1588        }
1589
1590        return 0;
1591}
1592
1593static void ksz9477_switch_exit(struct ksz_device *dev)
1594{
1595        ksz9477_reset_switch(dev);
1596}
1597
1598static const struct ksz_dev_ops ksz9477_dev_ops = {
1599        .get_port_addr = ksz9477_get_port_addr,
1600        .cfg_port_member = ksz9477_cfg_port_member,
1601        .flush_dyn_mac_table = ksz9477_flush_dyn_mac_table,
1602        .phy_setup = ksz9477_phy_setup,
1603        .port_setup = ksz9477_port_setup,
1604        .r_mib_cnt = ksz9477_r_mib_cnt,
1605        .r_mib_pkt = ksz9477_r_mib_pkt,
1606        .freeze_mib = ksz9477_freeze_mib,
1607        .port_init_cnt = ksz9477_port_init_cnt,
1608        .shutdown = ksz9477_reset_switch,
1609        .detect = ksz9477_switch_detect,
1610        .init = ksz9477_switch_init,
1611        .exit = ksz9477_switch_exit,
1612};
1613
1614int ksz9477_switch_register(struct ksz_device *dev)
1615{
1616        return ksz_switch_register(dev, &ksz9477_dev_ops);
1617}
1618EXPORT_SYMBOL(ksz9477_switch_register);
1619
1620MODULE_AUTHOR("Woojung Huh <Woojung.Huh@microchip.com>");
1621MODULE_DESCRIPTION("Microchip KSZ9477 Series Switch DSA Driver");
1622MODULE_LICENSE("GPL");
1623