linux/drivers/platform/x86/compal-laptop.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-or-later
   2/*-*-linux-c-*-*/
   3
   4/*
   5  Copyright (C) 2008 Cezary Jackiewicz <cezary.jackiewicz (at) gmail.com>
   6
   7  based on MSI driver
   8
   9  Copyright (C) 2006 Lennart Poettering <mzxreary (at) 0pointer (dot) de>
  10
  11 */
  12
  13/*
  14 * compal-laptop.c - Compal laptop support.
  15 *
  16 * This driver exports a few files in /sys/devices/platform/compal-laptop/:
  17 *   wake_up_XXX   Whether or not we listen to such wake up events (rw)
  18 *
  19 * In addition to these platform device attributes the driver
  20 * registers itself in the Linux backlight control, power_supply, rfkill
  21 * and hwmon subsystem and is available to userspace under:
  22 *
  23 *   /sys/class/backlight/compal-laptop/
  24 *   /sys/class/power_supply/compal-laptop/
  25 *   /sys/class/rfkill/rfkillX/
  26 *   /sys/class/hwmon/hwmonX/
  27 *
  28 * Notes on the power_supply battery interface:
  29 *   - the "minimum" design voltage is *the* design voltage
  30 *   - the ambient temperature is the average battery temperature
  31 *     and the value is an educated guess (see commented code below)
  32 *
  33 *
  34 * This driver might work on other laptops produced by Compal. If you
  35 * want to try it you can pass force=1 as argument to the module which
  36 * will force it to load even when the DMI data doesn't identify the
  37 * laptop as compatible.
  38 *
  39 * Lots of data available at:
  40 * http://service1.marasst.com/Compal/JHL90_91/Service%20Manual/
  41 * JHL90%20service%20manual-Final-0725.pdf
  42 *
  43 *
  44 *
  45 * Support for the Compal JHL90 added by Roald Frederickx
  46 * (roald.frederickx@gmail.com):
  47 * Driver got large revision. Added functionalities: backlight
  48 * power, wake_on_XXX, a hwmon and power_supply interface.
  49 *
  50 * In case this gets merged into the kernel source: I want to dedicate this
  51 * to Kasper Meerts, the awesome guy who showed me Linux and C!
  52 */
  53
  54/* NOTE: currently the wake_on_XXX, hwmon and power_supply interfaces are
  55 * only enabled on a JHL90 board until it is verified that they work on the
  56 * other boards too.  See the extra_features variable. */
  57
  58#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  59
  60#include <linux/module.h>
  61#include <linux/kernel.h>
  62#include <linux/init.h>
  63#include <linux/acpi.h>
  64#include <linux/dmi.h>
  65#include <linux/backlight.h>
  66#include <linux/platform_device.h>
  67#include <linux/rfkill.h>
  68#include <linux/hwmon.h>
  69#include <linux/hwmon-sysfs.h>
  70#include <linux/power_supply.h>
  71#include <linux/fb.h>
  72#include <acpi/video.h>
  73
  74/* ======= */
  75/* Defines */
  76/* ======= */
  77#define DRIVER_NAME "compal-laptop"
  78#define DRIVER_VERSION  "0.2.7"
  79
  80#define BACKLIGHT_LEVEL_ADDR            0xB9
  81#define BACKLIGHT_LEVEL_MAX             7
  82#define BACKLIGHT_STATE_ADDR            0x59
  83#define BACKLIGHT_STATE_ON_DATA         0xE1
  84#define BACKLIGHT_STATE_OFF_DATA        0xE2
  85
  86#define WAKE_UP_ADDR                    0xA4
  87#define WAKE_UP_PME                     (1 << 0)
  88#define WAKE_UP_MODEM                   (1 << 1)
  89#define WAKE_UP_LAN                     (1 << 2)
  90#define WAKE_UP_WLAN                    (1 << 4)
  91#define WAKE_UP_KEY                     (1 << 6)
  92#define WAKE_UP_MOUSE                   (1 << 7)
  93
  94#define WIRELESS_ADDR                   0xBB
  95#define WIRELESS_WLAN                   (1 << 0)
  96#define WIRELESS_BT                     (1 << 1)
  97#define WIRELESS_WLAN_EXISTS            (1 << 2)
  98#define WIRELESS_BT_EXISTS              (1 << 3)
  99#define WIRELESS_KILLSWITCH             (1 << 4)
 100
 101#define PWM_ADDRESS                     0x46
 102#define PWM_DISABLE_ADDR                0x59
 103#define PWM_DISABLE_DATA                0xA5
 104#define PWM_ENABLE_ADDR                 0x59
 105#define PWM_ENABLE_DATA                 0xA8
 106
 107#define FAN_ADDRESS                     0x46
 108#define FAN_DATA                        0x81
 109#define FAN_FULL_ON_CMD                 0x59 /* Doesn't seem to work. Just */
 110#define FAN_FULL_ON_ENABLE              0x76 /* force the pwm signal to its */
 111#define FAN_FULL_ON_DISABLE             0x77 /* maximum value instead */
 112
 113#define TEMP_CPU                        0xB0
 114#define TEMP_CPU_LOCAL                  0xB1
 115#define TEMP_CPU_DTS                    0xB5
 116#define TEMP_NORTHBRIDGE                0xB6
 117#define TEMP_VGA                        0xB4
 118#define TEMP_SKIN                       0xB2
 119
 120#define BAT_MANUFACTURER_NAME_ADDR      0x10
 121#define BAT_MANUFACTURER_NAME_LEN       9
 122#define BAT_MODEL_NAME_ADDR             0x19
 123#define BAT_MODEL_NAME_LEN              6
 124#define BAT_SERIAL_NUMBER_ADDR          0xC4
 125#define BAT_SERIAL_NUMBER_LEN           5
 126#define BAT_CHARGE_NOW                  0xC2
 127#define BAT_CHARGE_DESIGN               0xCA
 128#define BAT_VOLTAGE_NOW                 0xC6
 129#define BAT_VOLTAGE_DESIGN              0xC8
 130#define BAT_CURRENT_NOW                 0xD0
 131#define BAT_CURRENT_AVG                 0xD2
 132#define BAT_POWER                       0xD4
 133#define BAT_CAPACITY                    0xCE
 134#define BAT_TEMP                        0xD6
 135#define BAT_TEMP_AVG                    0xD7
 136#define BAT_STATUS0                     0xC1
 137#define BAT_STATUS1                     0xF0
 138#define BAT_STATUS2                     0xF1
 139#define BAT_STOP_CHARGE1                0xF2
 140#define BAT_STOP_CHARGE2                0xF3
 141#define BAT_CHARGE_LIMIT                0x03
 142#define BAT_CHARGE_LIMIT_MAX            100
 143
 144#define BAT_S0_DISCHARGE                (1 << 0)
 145#define BAT_S0_DISCHRG_CRITICAL         (1 << 2)
 146#define BAT_S0_LOW                      (1 << 3)
 147#define BAT_S0_CHARGING                 (1 << 1)
 148#define BAT_S0_AC                       (1 << 7)
 149#define BAT_S1_EXISTS                   (1 << 0)
 150#define BAT_S1_FULL                     (1 << 1)
 151#define BAT_S1_EMPTY                    (1 << 2)
 152#define BAT_S1_LiION_OR_NiMH            (1 << 7)
 153#define BAT_S2_LOW_LOW                  (1 << 0)
 154#define BAT_STOP_CHRG1_BAD_CELL         (1 << 1)
 155#define BAT_STOP_CHRG1_COMM_FAIL        (1 << 2)
 156#define BAT_STOP_CHRG1_OVERVOLTAGE      (1 << 6)
 157#define BAT_STOP_CHRG1_OVERTEMPERATURE  (1 << 7)
 158
 159
 160/* ======= */
 161/* Structs */
 162/* ======= */
 163struct compal_data{
 164        /* Fan control */
 165        int pwm_enable; /* 0:full on, 1:set by pwm1, 2:control by motherboard */
 166        unsigned char curr_pwm;
 167
 168        /* Power supply */
 169        struct power_supply *psy;
 170        struct power_supply_info psy_info;
 171        char bat_model_name[BAT_MODEL_NAME_LEN + 1];
 172        char bat_manufacturer_name[BAT_MANUFACTURER_NAME_LEN + 1];
 173        char bat_serial_number[BAT_SERIAL_NUMBER_LEN + 1];
 174};
 175
 176
 177/* =============== */
 178/* General globals */
 179/* =============== */
 180static bool force;
 181module_param(force, bool, 0);
 182MODULE_PARM_DESC(force, "Force driver load, ignore DMI data");
 183
 184/* Support for the wake_on_XXX, hwmon and power_supply interface. Currently
 185 * only gets enabled on a JHL90 board. Might work with the others too */
 186static bool extra_features;
 187
 188/* Nasty stuff. For some reason the fan control is very un-linear.  I've
 189 * come up with these values by looping through the possible inputs and
 190 * watching the output of address 0x4F (do an ec_transaction writing 0x33
 191 * into 0x4F and read a few bytes from the output, like so:
 192 *      u8 writeData = 0x33;
 193 *      ec_transaction(0x4F, &writeData, 1, buffer, 32);
 194 * That address is labeled "fan1 table information" in the service manual.
 195 * It should be clear which value in 'buffer' changes). This seems to be
 196 * related to fan speed. It isn't a proper 'realtime' fan speed value
 197 * though, because physically stopping or speeding up the fan doesn't
 198 * change it. It might be the average voltage or current of the pwm output.
 199 * Nevertheless, it is more fine-grained than the actual RPM reading */
 200static const unsigned char pwm_lookup_table[256] = {
 201        0, 0, 0, 1, 1, 1, 2, 253, 254, 3, 3, 3, 4, 4, 4, 5, 5, 5, 6, 6, 6,
 202        7, 7, 7, 8, 86, 86, 9, 9, 9, 10, 10, 10, 11, 92, 92, 12, 12, 95,
 203        13, 66, 66, 14, 14, 98, 15, 15, 15, 16, 16, 67, 17, 17, 72, 18, 70,
 204        75, 19, 90, 90, 73, 73, 73, 21, 21, 91, 91, 91, 96, 23, 94, 94, 94,
 205        94, 94, 94, 94, 94, 94, 94, 141, 141, 238, 223, 192, 139, 139, 139,
 206        139, 139, 142, 142, 142, 142, 142, 78, 78, 78, 78, 78, 76, 76, 76,
 207        76, 76, 79, 79, 79, 79, 79, 79, 79, 20, 20, 20, 20, 20, 22, 22, 22,
 208        22, 22, 24, 24, 24, 24, 24, 24, 219, 219, 219, 219, 219, 219, 219,
 209        219, 27, 27, 188, 188, 28, 28, 28, 29, 186, 186, 186, 186, 186,
 210        186, 186, 186, 186, 186, 31, 31, 31, 31, 31, 32, 32, 32, 41, 33,
 211        33, 33, 33, 33, 252, 252, 34, 34, 34, 43, 35, 35, 35, 36, 36, 38,
 212        206, 206, 206, 206, 206, 206, 206, 206, 206, 37, 37, 37, 46, 46,
 213        47, 47, 232, 232, 232, 232, 232, 232, 232, 232, 232, 232, 48, 48,
 214        48, 48, 48, 40, 40, 40, 49, 42, 42, 42, 42, 42, 42, 42, 42, 44,
 215        189, 189, 189, 189, 54, 54, 45, 45, 45, 45, 45, 45, 45, 45, 251,
 216        191, 199, 199, 199, 199, 199, 215, 215, 215, 215, 187, 187, 187,
 217        187, 187, 193, 50
 218};
 219
 220
 221
 222
 223/* ========================= */
 224/* Hardware access functions */
 225/* ========================= */
 226/* General access */
 227static u8 ec_read_u8(u8 addr)
 228{
 229        u8 value = 0;
 230        ec_read(addr, &value);
 231        return value;
 232}
 233
 234static s8 ec_read_s8(u8 addr)
 235{
 236        return (s8)ec_read_u8(addr);
 237}
 238
 239static u16 ec_read_u16(u8 addr)
 240{
 241        int hi, lo;
 242        lo = ec_read_u8(addr);
 243        hi = ec_read_u8(addr + 1);
 244        return (hi << 8) + lo;
 245}
 246
 247static s16 ec_read_s16(u8 addr)
 248{
 249        return (s16) ec_read_u16(addr);
 250}
 251
 252static void ec_read_sequence(u8 addr, u8 *buf, int len)
 253{
 254        int i;
 255        for (i = 0; i < len; i++)
 256                ec_read(addr + i, buf + i);
 257}
 258
 259
 260/* Backlight access */
 261static int set_backlight_level(int level)
 262{
 263        if (level < 0 || level > BACKLIGHT_LEVEL_MAX)
 264                return -EINVAL;
 265
 266        ec_write(BACKLIGHT_LEVEL_ADDR, level);
 267
 268        return 0;
 269}
 270
 271static int get_backlight_level(void)
 272{
 273        return (int) ec_read_u8(BACKLIGHT_LEVEL_ADDR);
 274}
 275
 276static void set_backlight_state(bool on)
 277{
 278        u8 data = on ? BACKLIGHT_STATE_ON_DATA : BACKLIGHT_STATE_OFF_DATA;
 279        ec_transaction(BACKLIGHT_STATE_ADDR, &data, 1, NULL, 0);
 280}
 281
 282
 283/* Fan control access */
 284static void pwm_enable_control(void)
 285{
 286        unsigned char writeData = PWM_ENABLE_DATA;
 287        ec_transaction(PWM_ENABLE_ADDR, &writeData, 1, NULL, 0);
 288}
 289
 290static void pwm_disable_control(void)
 291{
 292        unsigned char writeData = PWM_DISABLE_DATA;
 293        ec_transaction(PWM_DISABLE_ADDR, &writeData, 1, NULL, 0);
 294}
 295
 296static void set_pwm(int pwm)
 297{
 298        ec_transaction(PWM_ADDRESS, &pwm_lookup_table[pwm], 1, NULL, 0);
 299}
 300
 301static int get_fan_rpm(void)
 302{
 303        u8 value, data = FAN_DATA;
 304        ec_transaction(FAN_ADDRESS, &data, 1, &value, 1);
 305        return 100 * (int)value;
 306}
 307
 308
 309
 310
 311/* =================== */
 312/* Interface functions */
 313/* =================== */
 314
 315/* Backlight interface */
 316static int bl_get_brightness(struct backlight_device *b)
 317{
 318        return get_backlight_level();
 319}
 320
 321static int bl_update_status(struct backlight_device *b)
 322{
 323        int ret = set_backlight_level(b->props.brightness);
 324        if (ret)
 325                return ret;
 326
 327        set_backlight_state((b->props.power == FB_BLANK_UNBLANK)
 328                &&    !(b->props.state & BL_CORE_SUSPENDED)
 329                &&    !(b->props.state & BL_CORE_FBBLANK));
 330        return 0;
 331}
 332
 333static const struct backlight_ops compalbl_ops = {
 334        .get_brightness = bl_get_brightness,
 335        .update_status  = bl_update_status,
 336};
 337
 338
 339/* Wireless interface */
 340static int compal_rfkill_set(void *data, bool blocked)
 341{
 342        unsigned long radio = (unsigned long) data;
 343        u8 result = ec_read_u8(WIRELESS_ADDR);
 344        u8 value;
 345
 346        if (!blocked)
 347                value = (u8) (result | radio);
 348        else
 349                value = (u8) (result & ~radio);
 350        ec_write(WIRELESS_ADDR, value);
 351
 352        return 0;
 353}
 354
 355static void compal_rfkill_poll(struct rfkill *rfkill, void *data)
 356{
 357        u8 result = ec_read_u8(WIRELESS_ADDR);
 358        bool hw_blocked = !(result & WIRELESS_KILLSWITCH);
 359        rfkill_set_hw_state(rfkill, hw_blocked);
 360}
 361
 362static const struct rfkill_ops compal_rfkill_ops = {
 363        .poll = compal_rfkill_poll,
 364        .set_block = compal_rfkill_set,
 365};
 366
 367
 368/* Wake_up interface */
 369#define SIMPLE_MASKED_STORE_SHOW(NAME, ADDR, MASK)                      \
 370static ssize_t NAME##_show(struct device *dev,                          \
 371        struct device_attribute *attr, char *buf)                       \
 372{                                                                       \
 373        return sprintf(buf, "%d\n", ((ec_read_u8(ADDR) & MASK) != 0));  \
 374}                                                                       \
 375static ssize_t NAME##_store(struct device *dev,                         \
 376        struct device_attribute *attr, const char *buf, size_t count)   \
 377{                                                                       \
 378        int state;                                                      \
 379        u8 old_val = ec_read_u8(ADDR);                                  \
 380        if (sscanf(buf, "%d", &state) != 1 || (state < 0 || state > 1)) \
 381                return -EINVAL;                                         \
 382        ec_write(ADDR, state ? (old_val | MASK) : (old_val & ~MASK));   \
 383        return count;                                                   \
 384}
 385
 386SIMPLE_MASKED_STORE_SHOW(wake_up_pme,   WAKE_UP_ADDR, WAKE_UP_PME)
 387SIMPLE_MASKED_STORE_SHOW(wake_up_modem, WAKE_UP_ADDR, WAKE_UP_MODEM)
 388SIMPLE_MASKED_STORE_SHOW(wake_up_lan,   WAKE_UP_ADDR, WAKE_UP_LAN)
 389SIMPLE_MASKED_STORE_SHOW(wake_up_wlan,  WAKE_UP_ADDR, WAKE_UP_WLAN)
 390SIMPLE_MASKED_STORE_SHOW(wake_up_key,   WAKE_UP_ADDR, WAKE_UP_KEY)
 391SIMPLE_MASKED_STORE_SHOW(wake_up_mouse, WAKE_UP_ADDR, WAKE_UP_MOUSE)
 392
 393/* Fan control interface */
 394static ssize_t pwm_enable_show(struct device *dev,
 395                struct device_attribute *attr, char *buf)
 396{
 397        struct compal_data *data = dev_get_drvdata(dev);
 398        return sprintf(buf, "%d\n", data->pwm_enable);
 399}
 400
 401static ssize_t pwm_enable_store(struct device *dev,
 402                struct device_attribute *attr, const char *buf, size_t count)
 403{
 404        struct compal_data *data = dev_get_drvdata(dev);
 405        long val;
 406        int err;
 407
 408        err = kstrtol(buf, 10, &val);
 409        if (err)
 410                return err;
 411        if (val < 0)
 412                return -EINVAL;
 413
 414        data->pwm_enable = val;
 415
 416        switch (val) {
 417        case 0:  /* Full speed */
 418                pwm_enable_control();
 419                set_pwm(255);
 420                break;
 421        case 1:  /* As set by pwm1 */
 422                pwm_enable_control();
 423                set_pwm(data->curr_pwm);
 424                break;
 425        default: /* Control by motherboard */
 426                pwm_disable_control();
 427                break;
 428        }
 429
 430        return count;
 431}
 432
 433static ssize_t pwm_show(struct device *dev, struct device_attribute *attr,
 434                char *buf)
 435{
 436        struct compal_data *data = dev_get_drvdata(dev);
 437        return sprintf(buf, "%hhu\n", data->curr_pwm);
 438}
 439
 440static ssize_t pwm_store(struct device *dev, struct device_attribute *attr,
 441                const char *buf, size_t count)
 442{
 443        struct compal_data *data = dev_get_drvdata(dev);
 444        long val;
 445        int err;
 446
 447        err = kstrtol(buf, 10, &val);
 448        if (err)
 449                return err;
 450        if (val < 0 || val > 255)
 451                return -EINVAL;
 452
 453        data->curr_pwm = val;
 454
 455        if (data->pwm_enable != 1)
 456                return count;
 457        set_pwm(val);
 458
 459        return count;
 460}
 461
 462static ssize_t fan_show(struct device *dev, struct device_attribute *attr,
 463                char *buf)
 464{
 465        return sprintf(buf, "%d\n", get_fan_rpm());
 466}
 467
 468
 469/* Temperature interface */
 470#define TEMPERATURE_SHOW_TEMP_AND_LABEL(POSTFIX, ADDRESS, LABEL)        \
 471static ssize_t temp_##POSTFIX(struct device *dev,                       \
 472                struct device_attribute *attr, char *buf)               \
 473{                                                                       \
 474        return sprintf(buf, "%d\n", 1000 * (int)ec_read_s8(ADDRESS));   \
 475}                                                                       \
 476static ssize_t label_##POSTFIX(struct device *dev,                      \
 477                struct device_attribute *attr, char *buf)               \
 478{                                                                       \
 479        return sprintf(buf, "%s\n", LABEL);                             \
 480}
 481
 482/* Labels as in service guide */
 483TEMPERATURE_SHOW_TEMP_AND_LABEL(cpu,        TEMP_CPU,        "CPU_TEMP");
 484TEMPERATURE_SHOW_TEMP_AND_LABEL(cpu_local,  TEMP_CPU_LOCAL,  "CPU_TEMP_LOCAL");
 485TEMPERATURE_SHOW_TEMP_AND_LABEL(cpu_DTS,    TEMP_CPU_DTS,    "CPU_DTS");
 486TEMPERATURE_SHOW_TEMP_AND_LABEL(northbridge,TEMP_NORTHBRIDGE,"NorthBridge");
 487TEMPERATURE_SHOW_TEMP_AND_LABEL(vga,        TEMP_VGA,        "VGA_TEMP");
 488TEMPERATURE_SHOW_TEMP_AND_LABEL(SKIN,       TEMP_SKIN,       "SKIN_TEMP90");
 489
 490
 491/* Power supply interface */
 492static int bat_status(void)
 493{
 494        u8 status0 = ec_read_u8(BAT_STATUS0);
 495        u8 status1 = ec_read_u8(BAT_STATUS1);
 496
 497        if (status0 & BAT_S0_CHARGING)
 498                return POWER_SUPPLY_STATUS_CHARGING;
 499        if (status0 & BAT_S0_DISCHARGE)
 500                return POWER_SUPPLY_STATUS_DISCHARGING;
 501        if (status1 & BAT_S1_FULL)
 502                return POWER_SUPPLY_STATUS_FULL;
 503        return POWER_SUPPLY_STATUS_NOT_CHARGING;
 504}
 505
 506static int bat_health(void)
 507{
 508        u8 status = ec_read_u8(BAT_STOP_CHARGE1);
 509
 510        if (status & BAT_STOP_CHRG1_OVERTEMPERATURE)
 511                return POWER_SUPPLY_HEALTH_OVERHEAT;
 512        if (status & BAT_STOP_CHRG1_OVERVOLTAGE)
 513                return POWER_SUPPLY_HEALTH_OVERVOLTAGE;
 514        if (status & BAT_STOP_CHRG1_BAD_CELL)
 515                return POWER_SUPPLY_HEALTH_DEAD;
 516        if (status & BAT_STOP_CHRG1_COMM_FAIL)
 517                return POWER_SUPPLY_HEALTH_UNKNOWN;
 518        return POWER_SUPPLY_HEALTH_GOOD;
 519}
 520
 521static int bat_is_present(void)
 522{
 523        u8 status = ec_read_u8(BAT_STATUS2);
 524        return ((status & BAT_S1_EXISTS) != 0);
 525}
 526
 527static int bat_technology(void)
 528{
 529        u8 status = ec_read_u8(BAT_STATUS1);
 530
 531        if (status & BAT_S1_LiION_OR_NiMH)
 532                return POWER_SUPPLY_TECHNOLOGY_LION;
 533        return POWER_SUPPLY_TECHNOLOGY_NiMH;
 534}
 535
 536static int bat_capacity_level(void)
 537{
 538        u8 status0 = ec_read_u8(BAT_STATUS0);
 539        u8 status1 = ec_read_u8(BAT_STATUS1);
 540        u8 status2 = ec_read_u8(BAT_STATUS2);
 541
 542        if (status0 & BAT_S0_DISCHRG_CRITICAL
 543                        || status1 & BAT_S1_EMPTY
 544                        || status2 & BAT_S2_LOW_LOW)
 545                return POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
 546        if (status0 & BAT_S0_LOW)
 547                return POWER_SUPPLY_CAPACITY_LEVEL_LOW;
 548        if (status1 & BAT_S1_FULL)
 549                return POWER_SUPPLY_CAPACITY_LEVEL_FULL;
 550        return POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
 551}
 552
 553static int bat_get_property(struct power_supply *psy,
 554                                enum power_supply_property psp,
 555                                union power_supply_propval *val)
 556{
 557        struct compal_data *data = power_supply_get_drvdata(psy);
 558
 559        switch (psp) {
 560        case POWER_SUPPLY_PROP_STATUS:
 561                val->intval = bat_status();
 562                break;
 563        case POWER_SUPPLY_PROP_HEALTH:
 564                val->intval = bat_health();
 565                break;
 566        case POWER_SUPPLY_PROP_PRESENT:
 567                val->intval = bat_is_present();
 568                break;
 569        case POWER_SUPPLY_PROP_TECHNOLOGY:
 570                val->intval = bat_technology();
 571                break;
 572        case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: /* THE design voltage... */
 573                val->intval = ec_read_u16(BAT_VOLTAGE_DESIGN) * 1000;
 574                break;
 575        case POWER_SUPPLY_PROP_VOLTAGE_NOW:
 576                val->intval = ec_read_u16(BAT_VOLTAGE_NOW) * 1000;
 577                break;
 578        case POWER_SUPPLY_PROP_CURRENT_NOW:
 579                val->intval = ec_read_s16(BAT_CURRENT_NOW) * 1000;
 580                break;
 581        case POWER_SUPPLY_PROP_CURRENT_AVG:
 582                val->intval = ec_read_s16(BAT_CURRENT_AVG) * 1000;
 583                break;
 584        case POWER_SUPPLY_PROP_POWER_NOW:
 585                val->intval = ec_read_u8(BAT_POWER) * 1000000;
 586                break;
 587        case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
 588                val->intval = ec_read_u16(BAT_CHARGE_DESIGN) * 1000;
 589                break;
 590        case POWER_SUPPLY_PROP_CHARGE_NOW:
 591                val->intval = ec_read_u16(BAT_CHARGE_NOW) * 1000;
 592                break;
 593        case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
 594                val->intval = ec_read_u8(BAT_CHARGE_LIMIT);
 595                break;
 596        case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX:
 597                val->intval = BAT_CHARGE_LIMIT_MAX;
 598                break;
 599        case POWER_SUPPLY_PROP_CAPACITY:
 600                val->intval = ec_read_u8(BAT_CAPACITY);
 601                break;
 602        case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
 603                val->intval = bat_capacity_level();
 604                break;
 605        /* It smees that BAT_TEMP_AVG is a (2's complement?) value showing
 606         * the number of degrees, whereas BAT_TEMP is somewhat more
 607         * complicated. It looks like this is a negative nember with a
 608         * 100/256 divider and an offset of 222. Both were determined
 609         * experimentally by comparing BAT_TEMP and BAT_TEMP_AVG. */
 610        case POWER_SUPPLY_PROP_TEMP:
 611                val->intval = ((222 - (int)ec_read_u8(BAT_TEMP)) * 1000) >> 8;
 612                break;
 613        case POWER_SUPPLY_PROP_TEMP_AMBIENT: /* Ambient, Avg, ... same thing */
 614                val->intval = ec_read_s8(BAT_TEMP_AVG) * 10;
 615                break;
 616        /* Neither the model name nor manufacturer name work for me. */
 617        case POWER_SUPPLY_PROP_MODEL_NAME:
 618                val->strval = data->bat_model_name;
 619                break;
 620        case POWER_SUPPLY_PROP_MANUFACTURER:
 621                val->strval = data->bat_manufacturer_name;
 622                break;
 623        case POWER_SUPPLY_PROP_SERIAL_NUMBER:
 624                val->strval = data->bat_serial_number;
 625                break;
 626        default:
 627                break;
 628        }
 629        return 0;
 630}
 631
 632static int bat_set_property(struct power_supply *psy,
 633                                enum power_supply_property psp,
 634                                const union power_supply_propval *val)
 635{
 636        int level;
 637
 638        switch (psp) {
 639        case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
 640                level = val->intval;
 641                if (level < 0 || level > BAT_CHARGE_LIMIT_MAX)
 642                        return -EINVAL;
 643                if (ec_write(BAT_CHARGE_LIMIT, level) < 0)
 644                        return -EIO;
 645                break;
 646        default:
 647                break;
 648        }
 649        return 0;
 650}
 651
 652static int bat_writeable_property(struct power_supply *psy,
 653                                enum power_supply_property psp)
 654{
 655        switch (psp) {
 656        case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
 657                return 1;
 658        default:
 659                return 0;
 660        }
 661}
 662
 663
 664
 665
 666/* ============== */
 667/* Driver Globals */
 668/* ============== */
 669static DEVICE_ATTR_RW(wake_up_pme);
 670static DEVICE_ATTR_RW(wake_up_modem);
 671static DEVICE_ATTR_RW(wake_up_lan);
 672static DEVICE_ATTR_RW(wake_up_wlan);
 673static DEVICE_ATTR_RW(wake_up_key);
 674static DEVICE_ATTR_RW(wake_up_mouse);
 675
 676static DEVICE_ATTR(fan1_input,  S_IRUGO, fan_show,          NULL);
 677static DEVICE_ATTR(temp1_input, S_IRUGO, temp_cpu,          NULL);
 678static DEVICE_ATTR(temp2_input, S_IRUGO, temp_cpu_local,    NULL);
 679static DEVICE_ATTR(temp3_input, S_IRUGO, temp_cpu_DTS,      NULL);
 680static DEVICE_ATTR(temp4_input, S_IRUGO, temp_northbridge,  NULL);
 681static DEVICE_ATTR(temp5_input, S_IRUGO, temp_vga,          NULL);
 682static DEVICE_ATTR(temp6_input, S_IRUGO, temp_SKIN,         NULL);
 683static DEVICE_ATTR(temp1_label, S_IRUGO, label_cpu,         NULL);
 684static DEVICE_ATTR(temp2_label, S_IRUGO, label_cpu_local,   NULL);
 685static DEVICE_ATTR(temp3_label, S_IRUGO, label_cpu_DTS,     NULL);
 686static DEVICE_ATTR(temp4_label, S_IRUGO, label_northbridge, NULL);
 687static DEVICE_ATTR(temp5_label, S_IRUGO, label_vga,         NULL);
 688static DEVICE_ATTR(temp6_label, S_IRUGO, label_SKIN,        NULL);
 689static DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, pwm_show, pwm_store);
 690static DEVICE_ATTR(pwm1_enable,
 691                   S_IRUGO | S_IWUSR, pwm_enable_show, pwm_enable_store);
 692
 693static struct attribute *compal_platform_attrs[] = {
 694        &dev_attr_wake_up_pme.attr,
 695        &dev_attr_wake_up_modem.attr,
 696        &dev_attr_wake_up_lan.attr,
 697        &dev_attr_wake_up_wlan.attr,
 698        &dev_attr_wake_up_key.attr,
 699        &dev_attr_wake_up_mouse.attr,
 700        NULL
 701};
 702static const struct attribute_group compal_platform_attr_group = {
 703        .attrs = compal_platform_attrs
 704};
 705
 706static struct attribute *compal_hwmon_attrs[] = {
 707        &dev_attr_pwm1_enable.attr,
 708        &dev_attr_pwm1.attr,
 709        &dev_attr_fan1_input.attr,
 710        &dev_attr_temp1_input.attr,
 711        &dev_attr_temp2_input.attr,
 712        &dev_attr_temp3_input.attr,
 713        &dev_attr_temp4_input.attr,
 714        &dev_attr_temp5_input.attr,
 715        &dev_attr_temp6_input.attr,
 716        &dev_attr_temp1_label.attr,
 717        &dev_attr_temp2_label.attr,
 718        &dev_attr_temp3_label.attr,
 719        &dev_attr_temp4_label.attr,
 720        &dev_attr_temp5_label.attr,
 721        &dev_attr_temp6_label.attr,
 722        NULL
 723};
 724ATTRIBUTE_GROUPS(compal_hwmon);
 725
 726static int compal_probe(struct platform_device *);
 727static int compal_remove(struct platform_device *);
 728static struct platform_driver compal_driver = {
 729        .driver = {
 730                .name = DRIVER_NAME,
 731        },
 732        .probe  = compal_probe,
 733        .remove = compal_remove,
 734};
 735
 736static enum power_supply_property compal_bat_properties[] = {
 737        POWER_SUPPLY_PROP_STATUS,
 738        POWER_SUPPLY_PROP_HEALTH,
 739        POWER_SUPPLY_PROP_PRESENT,
 740        POWER_SUPPLY_PROP_TECHNOLOGY,
 741        POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
 742        POWER_SUPPLY_PROP_VOLTAGE_NOW,
 743        POWER_SUPPLY_PROP_CURRENT_NOW,
 744        POWER_SUPPLY_PROP_CURRENT_AVG,
 745        POWER_SUPPLY_PROP_POWER_NOW,
 746        POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
 747        POWER_SUPPLY_PROP_CHARGE_NOW,
 748        POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT,
 749        POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX,
 750        POWER_SUPPLY_PROP_CAPACITY,
 751        POWER_SUPPLY_PROP_CAPACITY_LEVEL,
 752        POWER_SUPPLY_PROP_TEMP,
 753        POWER_SUPPLY_PROP_TEMP_AMBIENT,
 754        POWER_SUPPLY_PROP_MODEL_NAME,
 755        POWER_SUPPLY_PROP_MANUFACTURER,
 756        POWER_SUPPLY_PROP_SERIAL_NUMBER,
 757};
 758
 759static struct backlight_device *compalbl_device;
 760
 761static struct platform_device *compal_device;
 762
 763static struct rfkill *wifi_rfkill;
 764static struct rfkill *bt_rfkill;
 765
 766
 767
 768
 769
 770/* =================================== */
 771/* Initialization & clean-up functions */
 772/* =================================== */
 773
 774static int dmi_check_cb(const struct dmi_system_id *id)
 775{
 776        pr_info("Identified laptop model '%s'\n", id->ident);
 777        extra_features = false;
 778        return 1;
 779}
 780
 781static int dmi_check_cb_extra(const struct dmi_system_id *id)
 782{
 783        pr_info("Identified laptop model '%s', enabling extra features\n",
 784                id->ident);
 785        extra_features = true;
 786        return 1;
 787}
 788
 789static const struct dmi_system_id compal_dmi_table[] __initconst = {
 790        {
 791                .ident = "FL90/IFL90",
 792                .matches = {
 793                        DMI_MATCH(DMI_BOARD_NAME, "IFL90"),
 794                        DMI_MATCH(DMI_BOARD_VERSION, "IFT00"),
 795                },
 796                .callback = dmi_check_cb
 797        },
 798        {
 799                .ident = "FL90/IFL90",
 800                .matches = {
 801                        DMI_MATCH(DMI_BOARD_NAME, "IFL90"),
 802                        DMI_MATCH(DMI_BOARD_VERSION, "REFERENCE"),
 803                },
 804                .callback = dmi_check_cb
 805        },
 806        {
 807                .ident = "FL91/IFL91",
 808                .matches = {
 809                        DMI_MATCH(DMI_BOARD_NAME, "IFL91"),
 810                        DMI_MATCH(DMI_BOARD_VERSION, "IFT00"),
 811                },
 812                .callback = dmi_check_cb
 813        },
 814        {
 815                .ident = "FL92/JFL92",
 816                .matches = {
 817                        DMI_MATCH(DMI_BOARD_NAME, "JFL92"),
 818                        DMI_MATCH(DMI_BOARD_VERSION, "IFT00"),
 819                },
 820                .callback = dmi_check_cb
 821        },
 822        {
 823                .ident = "FT00/IFT00",
 824                .matches = {
 825                        DMI_MATCH(DMI_BOARD_NAME, "IFT00"),
 826                        DMI_MATCH(DMI_BOARD_VERSION, "IFT00"),
 827                },
 828                .callback = dmi_check_cb
 829        },
 830        {
 831                .ident = "Dell Mini 9",
 832                .matches = {
 833                        DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 834                        DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 910"),
 835                },
 836                .callback = dmi_check_cb
 837        },
 838        {
 839                .ident = "Dell Mini 10",
 840                .matches = {
 841                        DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 842                        DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1010"),
 843                },
 844                .callback = dmi_check_cb
 845        },
 846        {
 847                .ident = "Dell Mini 10v",
 848                .matches = {
 849                        DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 850                        DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1011"),
 851                },
 852                .callback = dmi_check_cb
 853        },
 854        {
 855                .ident = "Dell Mini 1012",
 856                .matches = {
 857                        DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 858                        DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1012"),
 859                },
 860                .callback = dmi_check_cb
 861        },
 862        {
 863                .ident = "Dell Inspiron 11z",
 864                .matches = {
 865                        DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 866                        DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1110"),
 867                },
 868                .callback = dmi_check_cb
 869        },
 870        {
 871                .ident = "Dell Mini 12",
 872                .matches = {
 873                        DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
 874                        DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1210"),
 875                },
 876                .callback = dmi_check_cb
 877        },
 878        {
 879                .ident = "JHL90",
 880                .matches = {
 881                        DMI_MATCH(DMI_BOARD_NAME, "JHL90"),
 882                        DMI_MATCH(DMI_BOARD_VERSION, "REFERENCE"),
 883                },
 884                .callback = dmi_check_cb_extra
 885        },
 886        {
 887                .ident = "KHLB2",
 888                .matches = {
 889                        DMI_MATCH(DMI_BOARD_NAME, "KHLB2"),
 890                        DMI_MATCH(DMI_BOARD_VERSION, "REFERENCE"),
 891                },
 892                .callback = dmi_check_cb_extra
 893        },
 894        { }
 895};
 896MODULE_DEVICE_TABLE(dmi, compal_dmi_table);
 897
 898static const struct power_supply_desc psy_bat_desc = {
 899        .name           = DRIVER_NAME,
 900        .type           = POWER_SUPPLY_TYPE_BATTERY,
 901        .properties     = compal_bat_properties,
 902        .num_properties = ARRAY_SIZE(compal_bat_properties),
 903        .get_property   = bat_get_property,
 904        .set_property   = bat_set_property,
 905        .property_is_writeable = bat_writeable_property,
 906};
 907
 908static void initialize_power_supply_data(struct compal_data *data)
 909{
 910        ec_read_sequence(BAT_MANUFACTURER_NAME_ADDR,
 911                                        data->bat_manufacturer_name,
 912                                        BAT_MANUFACTURER_NAME_LEN);
 913        data->bat_manufacturer_name[BAT_MANUFACTURER_NAME_LEN] = 0;
 914
 915        ec_read_sequence(BAT_MODEL_NAME_ADDR,
 916                                        data->bat_model_name,
 917                                        BAT_MODEL_NAME_LEN);
 918        data->bat_model_name[BAT_MODEL_NAME_LEN] = 0;
 919
 920        scnprintf(data->bat_serial_number, BAT_SERIAL_NUMBER_LEN + 1, "%d",
 921                                ec_read_u16(BAT_SERIAL_NUMBER_ADDR));
 922}
 923
 924static void initialize_fan_control_data(struct compal_data *data)
 925{
 926        data->pwm_enable = 2; /* Keep motherboard in control for now */
 927        data->curr_pwm = 255; /* Try not to cause a CPU_on_fire exception
 928                                 if we take over... */
 929}
 930
 931static int setup_rfkill(void)
 932{
 933        int ret;
 934
 935        wifi_rfkill = rfkill_alloc("compal-wifi", &compal_device->dev,
 936                                RFKILL_TYPE_WLAN, &compal_rfkill_ops,
 937                                (void *) WIRELESS_WLAN);
 938        if (!wifi_rfkill)
 939                return -ENOMEM;
 940
 941        ret = rfkill_register(wifi_rfkill);
 942        if (ret)
 943                goto err_wifi;
 944
 945        bt_rfkill = rfkill_alloc("compal-bluetooth", &compal_device->dev,
 946                                RFKILL_TYPE_BLUETOOTH, &compal_rfkill_ops,
 947                                (void *) WIRELESS_BT);
 948        if (!bt_rfkill) {
 949                ret = -ENOMEM;
 950                goto err_allocate_bt;
 951        }
 952        ret = rfkill_register(bt_rfkill);
 953        if (ret)
 954                goto err_register_bt;
 955
 956        return 0;
 957
 958err_register_bt:
 959        rfkill_destroy(bt_rfkill);
 960
 961err_allocate_bt:
 962        rfkill_unregister(wifi_rfkill);
 963
 964err_wifi:
 965        rfkill_destroy(wifi_rfkill);
 966
 967        return ret;
 968}
 969
 970static int __init compal_init(void)
 971{
 972        int ret;
 973
 974        if (acpi_disabled) {
 975                pr_err("ACPI needs to be enabled for this driver to work!\n");
 976                return -ENODEV;
 977        }
 978
 979        if (!force && !dmi_check_system(compal_dmi_table)) {
 980                pr_err("Motherboard not recognized (You could try the module's force-parameter)\n");
 981                return -ENODEV;
 982        }
 983
 984        if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
 985                struct backlight_properties props;
 986                memset(&props, 0, sizeof(struct backlight_properties));
 987                props.type = BACKLIGHT_PLATFORM;
 988                props.max_brightness = BACKLIGHT_LEVEL_MAX;
 989                compalbl_device = backlight_device_register(DRIVER_NAME,
 990                                                            NULL, NULL,
 991                                                            &compalbl_ops,
 992                                                            &props);
 993                if (IS_ERR(compalbl_device))
 994                        return PTR_ERR(compalbl_device);
 995        }
 996
 997        ret = platform_driver_register(&compal_driver);
 998        if (ret)
 999                goto err_backlight;
1000
1001        compal_device = platform_device_alloc(DRIVER_NAME, -1);
1002        if (!compal_device) {
1003                ret = -ENOMEM;
1004                goto err_platform_driver;
1005        }
1006
1007        ret = platform_device_add(compal_device); /* This calls compal_probe */
1008        if (ret)
1009                goto err_platform_device;
1010
1011        ret = setup_rfkill();
1012        if (ret)
1013                goto err_rfkill;
1014
1015        pr_info("Driver " DRIVER_VERSION " successfully loaded\n");
1016        return 0;
1017
1018err_rfkill:
1019        platform_device_del(compal_device);
1020
1021err_platform_device:
1022        platform_device_put(compal_device);
1023
1024err_platform_driver:
1025        platform_driver_unregister(&compal_driver);
1026
1027err_backlight:
1028        backlight_device_unregister(compalbl_device);
1029
1030        return ret;
1031}
1032
1033static int compal_probe(struct platform_device *pdev)
1034{
1035        int err;
1036        struct compal_data *data;
1037        struct device *hwmon_dev;
1038        struct power_supply_config psy_cfg = {};
1039
1040        if (!extra_features)
1041                return 0;
1042
1043        /* Fan control */
1044        data = devm_kzalloc(&pdev->dev, sizeof(struct compal_data), GFP_KERNEL);
1045        if (!data)
1046                return -ENOMEM;
1047
1048        initialize_fan_control_data(data);
1049
1050        err = sysfs_create_group(&pdev->dev.kobj, &compal_platform_attr_group);
1051        if (err)
1052                return err;
1053
1054        hwmon_dev = devm_hwmon_device_register_with_groups(&pdev->dev,
1055                                                           "compal", data,
1056                                                           compal_hwmon_groups);
1057        if (IS_ERR(hwmon_dev)) {
1058                err = PTR_ERR(hwmon_dev);
1059                goto remove;
1060        }
1061
1062        /* Power supply */
1063        initialize_power_supply_data(data);
1064        psy_cfg.drv_data = data;
1065        data->psy = power_supply_register(&compal_device->dev, &psy_bat_desc,
1066                                          &psy_cfg);
1067        if (IS_ERR(data->psy)) {
1068                err = PTR_ERR(data->psy);
1069                goto remove;
1070        }
1071
1072        platform_set_drvdata(pdev, data);
1073
1074        return 0;
1075
1076remove:
1077        sysfs_remove_group(&pdev->dev.kobj, &compal_platform_attr_group);
1078        return err;
1079}
1080
1081static void __exit compal_cleanup(void)
1082{
1083        platform_device_unregister(compal_device);
1084        platform_driver_unregister(&compal_driver);
1085        backlight_device_unregister(compalbl_device);
1086        rfkill_unregister(wifi_rfkill);
1087        rfkill_unregister(bt_rfkill);
1088        rfkill_destroy(wifi_rfkill);
1089        rfkill_destroy(bt_rfkill);
1090
1091        pr_info("Driver unloaded\n");
1092}
1093
1094static int compal_remove(struct platform_device *pdev)
1095{
1096        struct compal_data *data;
1097
1098        if (!extra_features)
1099                return 0;
1100
1101        pr_info("Unloading: resetting fan control to motherboard\n");
1102        pwm_disable_control();
1103
1104        data = platform_get_drvdata(pdev);
1105        power_supply_unregister(data->psy);
1106
1107        sysfs_remove_group(&pdev->dev.kobj, &compal_platform_attr_group);
1108
1109        return 0;
1110}
1111
1112
1113module_init(compal_init);
1114module_exit(compal_cleanup);
1115
1116MODULE_AUTHOR("Cezary Jackiewicz");
1117MODULE_AUTHOR("Roald Frederickx (roald.frederickx@gmail.com)");
1118MODULE_DESCRIPTION("Compal Laptop Support");
1119MODULE_VERSION(DRIVER_VERSION);
1120MODULE_LICENSE("GPL");
1121